Develop Bugs

[10.2.2015][TUTORIAL][how to root yu yureka][noob friendly][Only for Kitkat 32bit]

Hello all Yu Yureka lovers!!! :highfive:
Explore the seemless possiblities by ROOTING your Yu Yureka!!!
This guide helps you to "Unlock Bootloader", "Flash Custom Recovery" and "Gain Root Access"
*Things you needed: Laptop or Desktop with windows OS (not tested in other OS), USB Data cable, ADB and Fastboot Drivers( you can find these here or here extract these file in c:\ of your laptop/desktop) and last ofcourse your Yu Yureka (atleast 75% charged).
Warning: This process will delete all data stored in internal storage so better backup all the files stored in internal storage.
So before getting started you need to enable USB Debugging/Android Debugging to enable you can just follow these steps:
Go to settings> About phone and keep taping on build number till it appears "You are a developer now", now you can exit.
Now again go to settings>developer option(only after the previous step it will be enabled)> check/select android debugging.
Before doing unlocking procedures win x64 users [all 7,8,8.1,10 OS] need to disable driver signature enforcement"
for windows 7 x64 :
When boot screen loads, press the F8 function key a few times until you see this boot menu boot menu:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
now look for option in the bottom called Disable Driver Signature Enforcement
Use the arrow keys to highlight it and then press the ENTER key. Windows will load like normal and now u can unlock yureka like win x86 [dont restart windows without unlocking becoz restart makes again the driver signature enable]
for windows 8,8.1,10 x64
click this link and follow instructions there and follow yureka unlocking procedures..
So lets get started!!!
1) Unlocking Bootloader:
Power off your Yu Yureka device
Connect your device and laptop/desktop by USB data cable
You will see the notification light of your Yu Yureka will glow "RED"
Now keep pressed the volume up button of your Yu Yureka, till it boots to the fastboot screen
Now browse to your c:/ open the folder which you extracted earlier(ADB and fastboot)
Now open command window in that folder(press ctrl+shift and right click).
Type the following command and press enter.
Code:
fastboot -i 0x1ebf oem unlock
Your Bootloader in now unlocked
*If you are facing issue like "waiting for device" when you type the command then please install minimal adb and fastboot or ADB and Fastboot drivers from google drive and try to execute the command
2) Flashing a Custom Recovery:
Download the recovery-yu.img file (here is link for CWM v6.0.5.1)
place the downloaded recovery-yu.img file in folder where fastboot files are extracted
Open command window in the folder and type the following command and press enter.
Code:
fastboot -i 0x1ebf flash recovery recovery-yu.img
*note: if you download any other custom recovery which is named differently, while writing the command you need to put the name of the recovery which is in ".img" file.
Now you just flashed a custom recovery
3) Last part giving root access:
Download the superuser file
Place the file in the internal storage or external storage
Boot your Yu Yureka into recovery mode by pressing volume up + volume down + power button
In recovery select install zip from storage and browse to the folder where you have downloaded the superuser.zip
And select install
Please note:
These l are the issues faced after the new incremental update:
Issues:
*cannot root because custom recovery is not booting
*every time after flashing custom recovery it boots into stock CM recovery
Solution:
1. Download the superuser. zip and place it in external sd-card
2. Go to developer option and disable "update cm recovery".
3. now flash the custom recovery again through command prompt
4. Disconnect the cable and press these combination keys to boot into recovery "vol up+ vol down+ power
5. Now it should boot into custom recovery
6. Install the superuser. zip
Click to expand...
Click to collapse
Congratulation you have successfully rooted you Yu Yureka and now "PlayGod"
Credits:
@vishal_android freak for his original post, recovery and superuser.zip
@ansebovi for adding disable driver signature enforcement to the OP
If it helped hit thanks :good:

"waiting for devices" issue
*If you are facing issue like "waiting for device" when you type the command then please install minimal adb and fastboot and try to execute the command Don't forget to enable USB debugging:good:

Yu Yureka phone struck on fast boot mode
How to go to normal mode from fastboot mode , i tried most of option but didn't worked. If i press power button it shows fastboot mode, volmue up +down then power button also it shows fastboot mode screen nothing happens. This is happening after seletec advanced reboot then recovery . I tired to unlok the bootloader , it say's unlocked but i m somehow struck in FASTBOOT mode, pls help to get out of it.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot -i 0x1ebf oem device-in
fo
...
(bootloader) Device tampered: true
(bootloader) Device unlocked: true
(bootloader) Charger screen enabled: true
(bootloader) Display panel:
OKAY [ 0.016s]
finished. total time: 0.016s

mice3138 said:
How to go to normal mode from fastboot mode , i tried most of option but didn't worked. If i press power button it shows fastboot mode, volmue up +down then power button also it shows fastboot mode screen nothing happens. This is happening after seletec advanced reboot then recovery . I tired to unlok the bootloader , it say's unlocked but i m somehow struck in FASTBOOT mode, pls help to get out of it.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot -i 0x1ebf oem device-in
fo
...
(bootloader) Device tampered: true
(bootloader) Device unlocked: true
(bootloader) Charger screen enabled: true
(bootloader) Display panel:
OKAY [ 0.016s]
finished. total time: 0.016s
Click to expand...
Click to collapse
Did you flash recovery???

Still the same after installing it also

bro struck at waiting for device

Successfully unlocked bootloader, installed twrp & rooted (SuperSU). Thanks OP for tips.
USB Debugging should be enabled.
At PC (Linux OS): do use "sudo fastboot ....." otherwise you will not get response for fastboot cmd.
If using windows OS, open command prompt for administrator.

darshankedige01 said:
bro struck at waiting for device
Click to expand...
Click to collapse
Same here. Adb and fastboot drivers are installed. But its the device drivers are not installed. But my samsung galaxy s3 works fine with Adb.
dumtara said:
Successfully unlocked bootloader, installed twrp & rooted (SuperSU). Thanks OP for tips.
USB Debugging should be enabled.
At PC (Linux OS): do use "sudo fastboot ....." otherwise you will not get response for fastboot cmd.
If using windows OS, open command prompt for administrator.
Click to expand...
Click to collapse
Can you guide me how to do it with Linux. I have windows 8.1 and its stuck at waiting for device. So i want to try it with Linux now.

Note : try all this at your own risk.
Enable Developper mode & USB Debugging in YU Yureka.
Adb & fastboot should be installed on your linux m/c.
Now connect YU via usb .
At prompt type this.
Code:
$adb reboot-bootloader
YU will now be in fastboot mode.
Now give command as
Code:
$sudo fastboot -i 0x1ebf oem unlock
Code:
$sudo fastboot -i 0x1ebf flash recovery recovery-yu.img
Code:
$sudo fastboot -i 0x1ebf reboot
boot into newly installed recovery.
Code:
$adb reboot recovery
select "install from zip" option & flash SuperSU.zip

dumtara said:
Note : try all this at your own risk.
Enable Developper mode & USB Debugging in YU Yureka.
Adb & fastboot should be installed on your linux m/c.
Now connect YU via usb .
At prompt type this.
Code:
$adb reboot-bootloader
YU will now be in fastboot mode.
Now give command as
Code:
$sudo fastboot -i 0x1ebf oem unlock
Code:
$sudo fastboot -i 0x1ebf flash recovery recovery-yu.img
Code:
$sudo fastboot -i 0x1ebf reboot
boot into newly installed recovery.
Code:
$adb reboot recovery
select "install from zip" option & flash SuperSU.zip
Click to expand...
Click to collapse
I tried it. Got fastboot and adb installed on kali but some other error showing up now. I think its because of kali. Should work on ubuntu or other version.
---------- Post added at 08:30 PM ---------- Previous post was at 08:17 PM ----------
Its driving me crazy. Not able to root this phone. Never had any problem with samsung phones

Kapiljhajhria said:
I tried it. Got fastboot and adb installed on kali but some other error showing up now. I think its because of kali. Should work on ubuntu or other version.
---------- Post added at 08:30 PM ---------- Previous post was at 08:17 PM ----------
Its driving me crazy. Not able to root this phone. Never had any problem with samsung phones
Click to expand...
Click to collapse
Sir which windows os you are using???

is rooting yu void warranty or cynogen giving us freedom same as one+1?

vikas44493 said:
is rooting yu void warranty or cynogen giving us freedom same as one+1?
Click to expand...
Click to collapse
As per YU promise unlocking BOOTLOADER doesn't void your warranty

aashking said:
Sir which windows os you are using???
Click to expand...
Click to collapse
Windows 8.1 64bit
Never mind i finally rooted my phone. I tried so many adb and fastbooot drivers from different websites that one of them worked.

Kapiljhajhria said:
Windows 8.1 64bit
Never mind i finally rooted my phone. I tried so many adb and fastbooot drivers from different websites that one of them worked.
Click to expand...
Click to collapse
Can you post the link so that i can add to OP???

aashking said:
Can you post the link so that i can add to OP???
Click to expand...
Click to collapse
I have no idea which one worked. I downloaded same stuff plenty of times too from different websites. Kept trying all of them and then trying to root. I thought of posting here link to which one worked for me. But i couldn't figure out which one did.

@aashking
hi nice tut...
but this works only on win x86 users...
so can you please add this to OP for x64 users
before doing unlocking procedures win x64 users [all 7,8,8.1,10 OS] need to disable driver signature enforcement"
for windows 7 x64 :
When boot screen loads, press the F8 function key a few times until you see this boot menu
:
now look for option in the bottom called Disable Driver Signature Enforcement
Use the arrow keys to highlight it and then press the ENTER key. Windows will load like normal and now u can unlock yureka like win x86 [dont restart windows without unlocking becoz restart makes again the driver signature enable]
for windows 8,8.1,10 x64
click this link and follow instructions there and follow yureka unlocking procedures..

OP updated [31.1.2015]
Guide updated with some useful steps which i missed.
Enjoy Rooting :good::highfive:

So, i'm planning to root my yureka... Does the OT's steps to root yureka work completely fine now (after the steps updation & all) ?
i use a win 7 x64 PC. Do i need to take any other extra precaution?

ujilraj said:
So, i'm planning to root my yureka... Does the OT's steps to root yureka work completely fine now (after the steps updation & all) ?
i use a win 7 x64 PC. Do i need to take any other extra precaution?
Click to expand...
Click to collapse
Don't worry there in only one in a million chance that you can damage your device by rooting.
I tried above steps (before thread got updated) atleast 20 times.
There is nothing in these steps that can harm your device.

No succes trying to unlock my Swift 2x

Hi, I spent several hours trying to unlock my phone. Tried following steps:
* I made a full backup
* I did full reset to original settings: Androïd 8.1.0
* I got myself developers rights
* in settings turned on 'usb debugging' , 'OEM unlock' and 'advanced restart'
After turning off device and restart ('power/vol up' buttons), device started in recovery mode
* downloaded 'ADB + Fastboot-package' on Win10-PC and tried in every conceivable way to install but phone would not not connect; recovery boot indicated device was locked; PC did not recognize phone
and impossible to flash TWRP-recovery
* I installed Magisk-manager on phone with succes to avoid having to use a PC; but then flashing TWRP did not succeed
What did I wrong, what do I wrong? Suggestions VERY welcome. after all this I had rather not return to original OS. Thanks for your help.

With the phone in fastboot mode issue "fastboot devices" make sure you get a response.
Then "fastboot oem unlock - go"

Thank. you very much for your answer. Problem is that after rebooting with <power + volup> I get a menu with ao START (in green), Power off (i n white), Recovery mode (in red) and Restart Bootloader (in red). Further on I read FASTBOOT MODE (in red), product name etc., SECURE BOOT -enabled (in white). and DVEICE. STATE - locked (in red). How do I get my phone in 'fastboot mode'?
Thanks for help.

hepkeb said:
How do I get my phone in 'fastboot mode'?
Thanks for help.
Click to expand...
Click to collapse
First you select Fastboot
Spoiler: Fastboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then you get in Fastboot Mode, then connect your cable to your Pc
Spoiler: Fastboot Mode
THIS IS FASTBOOT !

Thank you for trying to help. Of course I know how to get in fastboot mode. My problem is that in 'every' mode my telephone is locked, and I do not succeed in unlocking it. I cannot connect to another device, Magisk installation not complete etc. Again: I have developers right, I unlocked OEM, I did allow USB-debugging but no unlocked device!? What is going wrong, or has Wileyfox blocked the normal unlocking-procedure?

hepkeb said:
Thank. you very much for your answer. Problem is that after rebooting with <power + volup> I get a menu with ao START (in green), Power off (i n white), Recovery mode (in red) and Restart Bootloader (in red). Further on I read FASTBOOT MODE (in red), product name etc., SECURE BOOT -enabled (in white). and DVEICE. STATE - locked (in red). How do I get my phone in 'fastboot mode'?
Thanks for help.
Click to expand...
Click to collapse
That is fast boot mode

robin0800 said:
That is fast boot mode
Click to expand...
Click to collapse
I have exactly the same problem. I do not have access to the phone and a hard reset leads me to having to enter a googe account synced with the device which I do not have the details of. I can enter the mode that you describe above and the FASTBOOT MODE is in red below. Now when I'm here and plug into my laptop wth USB and fire up fastboot.exe and issue 'fastboot device' it just says '< waiting for device >'.
Did you manage to make any progress on this issue at all, I'm really stuck!

download adb and fastboot from here
[OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
15 seconds ADB Installer v1.4.3 ADB, Fastboot and Drivers What is this? This is All-in-One installer for 3 most needed PC tools for Android. No need to download big SDK for 3 small things. I originaly made it for my Kurdish friend AnGrY DuDe in...
forum.xda-developers.com
unzip the file and then install adb and fastboot, no drivers needed on win ten.
enable debugging and debugging notifier on phone.
open a command prompt and do "adb Devices"
the first time you do this you should get a notification on your phone accept it.
do "adb Devices" again and the phone should be seen.
do adb reboot bootloader
you should be in fastboot now
do fastboot devices and then fastboot oem unlock - go.

robi0800 said:
download adb and fastboot from here
[OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
15 seconds ADB Installer v1.4.3 ADB, Fastboot and Drivers What is this? This is All-in-One installer for 3 most needed PC tools for Android. No need to download big SDK for 3 small things. I originaly made it for my Kurdish friend AnGrY DuDe in...
forum.xda-developers.com
unzip the file and then install adb and fastboot, no drivers needed on win ten.
enable debugging and debugging notifier on phone.
open a command prompt and do "adb Devices"
the first time you do this you should get a notification on your phone accept it.
do "adb Devices" again and the phone should be seen.
do adb reboot bootloader
you should be in fastboot now
do fastboot devices and then fastboot oem unlock - go.
Click to expand...
Click to collapse
Thanks robi0800 but I don't have access to the phone so I can't enable USB debugging which means I can't use adb. I am trying to use fastboot but when I issue the command 'fastboot device' it can't connect to the phone and just displays '< waiting for device >'. Any other advice on how to make my Win10 laptop recognise the device when I plug it in so I can use fastoot successfully?

Sounds like you are missing a driver you could try the driver from the package in post #8 above?

Thanks robin0800, I've tried that package with the original Wileyfox red USB cable, no luck unfortunately. My Win10 laptop can see the device in Device Manager but adb Devices will not list anything, neither will fastboot. I don't have access to the phone to enable usb debugging.

Bermudan said:
Thanks robin0800, I've tried that package with the original Wileyfox red USB cable, no luck unfortunately. My Win10 laptop can see the device in Device Manager but adb Devices will not list anything, neither will fastboot. I don't have access to the phone to enable usb debugging.
Click to expand...
Click to collapse
Adb will not see it if debugging is not enabled but fastboot does not need this but the phone must be in recovery mode

robin0800 said:
Adb will not see it if debugging is not enabled but fastboot does not need this but the phone must be in recovery mode
Click to expand...
Click to collapse
Thanks - and to put it in recovery mode is this just Powebutton + Vol Up for several seconds or Vol Down, I can't recall...

Question Bricked OP9pro

Does anyone have the MSMTOOL for LE2120? bricked my phone when trying to patch the boot.img to magisk version...
Now totally stuck... even adb commands to restore does not work...

danjcxie said:
Does anyone have the MSMTOOL for LE2120? bricked my phone when trying to patch the boot.img to magisk version...
Now totally stuck... even adb commands to restore does not work...
Click to expand...
Click to collapse
What did you do to try to patch it? Why are you in adb? Does fastboot work?

craznazn said:
What did you do to try to patch it? Why are you in adb? Does fastboot work?
Click to expand...
Click to collapse
Patched the boot.img using magisk and then flashed it. After patching, it totally cant boot and can only boot to bootloader.
tried alot of version of MSMtool and it will always fail with param preload error...
Then tried manually recover via extracting the payload using python then using adbtools to wipe and flash but it will also fail because some img files are unable to flash over to the phone...
Any other solutions?

U not able to flash boot the stock boot.img?

i am able to flash the stock boot.img to the phone but some critical img files will come out with
FAILED (remote: 'Flashing is not allowed for Critical Partitions.
')
fastboot: error: Command failed

You need to be in fastbootd,
Code:
fastboot reboot fastboot

craznazn said:
You need to be in fastbootd,
Code:
fastboot reboot fastbootd
Click to expand...
Click to collapse
Nope not working too...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

danjcxie said:
Nope not working too...
View attachment 5281163
Click to expand...
Click to collapse
Sorry, fastboot reboot fastboot (without the d)

@danjcxie
To be honest, I would download the rom and boot with the recovery image instead, I'll upload the image collection...
Will post a link here once it's up.
Actually, just noticed there isn't a recovery image, so boot to the default boot.img using fastboot, then see if the storage shows on your computer, copy the latest default rom over to the main storage folder then then go into Settings > System > System Updates and use the cog to do a local update using the rom zip.
That should re-install everything back to default, you might get lucky and still have all your data
My collection is for the Europe build FYI:
OP9P_Image_Collection_BA_11.2.3.3.zip | by djsubterrain for OnePlus 9 Pro
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
MD5 : 00227014483b4913a2624fac6f492434
So you would reboot the phone into fastboot mode by holding vol up during boot
Once you are in fastboot mode connect the phone to your computer
Test that the computer can see it properly using fastboot devices
You should see a number returned, if so then your computer is recognising the phone, if you don't then try installing the latest drivers from here
If fastboot can see the device properly then copy the default boot.img to the same folder as your fastboot.exe and type the following :
fastboot boot boot.img
You should see a message saying it's transferring it to the phone, then it should boot the phone using it, it's slower than a normal boot but, if everything else on the phone is ok, then you should see it booted and it should accept your lock method
Once you get into the phone using that boot.img, try connecting the phone to your computer and see if it's recognised, if it is then copy over the latest stock rom to your main storage folder, then go to Settings > System > System Updates and use the cog to do a local update using the rom zip
I'm guessing it should let you because it will see a difference between your boot image and the one from the rom.

MSM tool for LE2125 - 11.2.2.2.LE15AA
User Type of Others for login MSM Tool for LE2125 - 11.2.2.2.LE15AA Drivers Mirrors: (provided by @djsubterrain) MSM Tool : https://sourceforge.net/projects/djsubterrain/files/OnePlus 9 Pro/OP9P_MSM_Tool.zip/download MD5 ...
forum.xda-developers.com

New problem... After i did fastboot reboot fastboot, it shows low battery whole day and is unable to charge totally... it has been charging the whole day now and totally cant turn on at all.
it keeps showing the lightning sign in the centre of the circle keeps blinking and dies off

danjcxie said:
New problem... After i did fastboot reboot fastboot, it shows low battery whole day and is unable to charge totally... it has been charging the whole day now and totally cant turn on at all.
it keeps showing the lightning sign in the centre of the circle keeps blinking and dies off
View attachment 5281971
Click to expand...
Click to collapse
Turn it off and try charging it
Also "fastboot reboot fastboot" isn't a valid command, there is an adb command "adb reboot bootloader" but that can only be run from within your rom from when you are in recovery with the phone connected
See here :
Fastboot Commands: A Beginner’s Guide
With this guide of ours, you'll be able to learn all the fastboot commands and their syntax. We've also posted some hidden commands which you never knew.
android.tutorials.how
#To reboot your device
fastboot reboot
#To reboot your device to fastboot mode
fastboot reboot-bootloader
Click to expand...
Click to collapse

djsubterrain said:
Turn it off and try charging it
Click to expand...
Click to collapse
Yup tried. Everytime you just plug in the charging cable, it will just auto boot up and show the charging sign

danjcxie said:
Yup tried. Everytime you just plug in the charging cable, it will just auto boot up and show the charging sign
Click to expand...
Click to collapse
Yeah that symbol isn't what I get, I get a blue lightning sign with the percentage underneath. Are you running OxygenOS or ColorOS?
I think it might be time for you to contact OnePlus support

djsubterrain said:
Turn it off and try charging it
Also "fastboot reboot fastboot" isn't a valid command, there is an adb command "adb reboot bootloader" but that can only be run from within your rom from when you are in recovery with the phone connected
See here :
Fastboot Commands: A Beginner’s Guide
With this guide of ours, you'll be able to learn all the fastboot commands and their syntax. We've also posted some hidden commands which you never knew.
android.tutorials.how
Click to expand...
Click to collapse
Wtf are you talking about. fastboot reboot fastboot is literally the only way to get into fastbootd if you can't get to recovery or boot normally.
Regarding battery, that I'm not sure, hopefully someone can help

craznazn said:
OP
Wtf are you talking about. fastboot reboot fastboot is literally the only way to get into fastbootd if you can't get to recovery or boot normally.
Regarding battery, that I'm not sure, hopefully someone can help
Click to expand...
Click to collapse
OK, firstly, who the hell do you think you're talking to?
Secondly, did you look at the link I posted?

djsubterrain said:
OK, firstly, who the hell do you think you're talking to?
Secondly, did you look at the link I posted?
Click to expand...
Click to collapse
Who the hell are you? Why the hell are you linking "tutorials.how"?
fastboot/fastboot.cpp - platform/system/core - Git at Google
android.googlesource.com
Lines 2178, source tells you to reboot fastbootd by reboot fastboot.
Show me it's not a valid command, go on

craznazn said:
Who the hell are you? Why the hell are you linking "tutorials.how"?
fastboot/fastboot.cpp - platform/system/core - Git at Google
android.googlesource.com
Lines 2178, source tells you to reboot fastbootd by reboot fastboot.
Show me it's not a valid command, go on
Click to expand...
Click to collapse
Go ahead and help the guy solve his problem.
Just remember it's fastboot, not fastbootd.
Now, how do you block people on here again?

danjcxie said:
Does anyone have the MSMTOOL for LE2120? bricked my phone when trying to patch the boot.img to magisk version...
Now totally stuck... even adb commands to restore does not work...
Click to expand...
Click to collapse
use the MSM Tool with the latest drivers
QDLoader HS-USB Driver_64bit_Setup
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com

danjcxie said:
Does anyone have the MSMTOOL for LE2120? bricked my phone when trying to patch the boot.img to magisk version...
Now totally stuck... even adb commands to restore does not work...
Click to expand...
Click to collapse
This just worked for me minutes ago
OP9Pro - Repository of MSM Unbrick Tools (TMO, EU, GLO, IN)
By using these tools, you accept full responsibility for your actions. Your warranty is void should you run any of these utilities without OnePlus support present. I am not responsible for bricks, fires, nuclear war, etc. If you modified any...
forum.xda-developers.com
i downloaded Indian Variant LE2121 while my phone is LE2120 ant it worked

FP4 stucks after unlock the bootloader

Hello together,
today i tried to install /e/ OS on my new FP4.
I did everything like in the official description:
> ## Unlocking the bootloader
>
> 1. Boot the device
> 2. Enable and connect Wifi
> 3. Enable Developer options
> 4. From developer options, enable OEM unlock
> * Get the unlock code from [this site](https://www.fairphone.com/en/bootloader-unlocking-code-for-fairphone-3/) and enter it
> 5. Reboot on fastboot by running the command in the PC console `adb reboot bootloader`
>
> 6.*Tip:** All the console commands are run on an adb enabled PC and in the `adb` console.
>
> 7. Ask for unlock with `fastboot flashing unlock`
> 8. Approve with <kbd>volume +</kbd> then <kbd>power</kbd>
> * The device proceed with a factory reset, and automatically reboots
At 8 i maybe made a mistake, when you are in the fastboot mode, you can choose different options, i choosed something like FFBM or something like this. Then the device restarted and since that it always shows the "blue dots" like in the beginning but nothing more happens, since hours.
I turned it off and on again, without success.
I can not load the fastboot again via ADB, because the device is not recognized.
If i try to use the volumeUP or VolumeDOWN at the startup, nothing happens and it restarts again after a few seconds.
So there is no way for me to enter the fastboot mode again.
So I have two questions to you, lovely community.
One is, can anybody help me?
Second, can somebody tell me how the different options are called in the fastboot mode, so i can google it and do more research.
THANKS a lot and sorry for my english :slight_sm

Hi,
Are you able to launch the stock rom or are u stuck on bootloop or bootloader page ?
If you can launch the stock rom, enable oem, debugging and unlock bootloader in developper options.
Then connect phone to pc with the cable and type adb devices
see if the phone is recopgnized.
Then adb reboot bootloader and do all steps of the official guide.
If you use Windows I suggest you to put all file to your adb folder, type CD /path/to/folder/
And copy paste all commands at once, this will avoid error of mishandling during fastboot operations.
If you stuck on a "waiting for phone" when you are in fastboot mode, check you driver, or test with a linux machine or see Hulk's solution here
If you stuck on a bootloop just use the key combo to enter bootloader. check on the bootloader is everything is ok (unlock) if not redone steps to unlock bootloader, then flash recovery from /e/ os folder fastboot flash recovery recovery.img
Then enter in recovery use the combo key to have the menu choice between bootloader, recovery... then enter recovery and wipe data...
Then restart the official guide of /e/ os.
You may ask on /e/ os forum too many much more Fairphone user are there and can help you (link i gave you above).

A944684 said:
Hi,
Are you able to launch the stock rom or are u stuck on bootloop or bootloader page ?
If you can launch the stock rom, enable oem, debugging and unlock bootloader in developper options.
Then connect phone to pc with the cable and type adb devices
see if the phone is recopgnized.
Then adb reboot bootloader and do all steps of the official guide.
If you use Windows I suggest you to put all file to your adb folder, type CD /path/to/folder/
And copy paste all commands at once, this will avoid error of mishandling during fastboot operations.
If you stuck on a "waiting for phone" when you are in fastboot mode, check you driver, or test with a linux machine or see Hulk's solution here
If you stuck on a bootloop just use the key combo to enter bootloader. check on the bootloader is everything is ok (unlock) if not redone steps to unlock bootloader, then flash recovery from /e/ os folder fastboot flash recovery recovery.img
Then enter in recovery use the combo key to have the menu choice between bootloader, recovery... then enter recovery and wipe data...
Then restart the official guide of /e/ os.
You may ask on /e/ os forum too many much more Fairphone user are there and can help you (link i gave you above).
Click to expand...
Click to collapse
Hello,
thanks for your reply.
I posted the same comment at the /E/ OS Forum as well.
I Can not load the stock rom, there are only this blue dots circling around for hours:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can not enter anything else, using ADB is not possible because the device is not recognized and the combination of volumeUP and power or volumeDOWN and power only restarts the device.
Do you have a FP4 and you maybe can tell me which options in the top of the fastboot menu you can choose?
Something like reboot and so on.
I will try the solution in your link in a few hours when i have more time.
Thanks a lot and BR

Bootloader menu options are "start / restart bootloader / recovery mode / power off / boot in ffbm / boot to qmmi"
I don't understand your problem if your bootloader is unlock you must have accesss to bootloader.
Are you sure you didn't relock bootloader before checking the rom is correctly installed ?
Contact /e/ support to have the precise combo key to enter bootloader. sometimes it change from phone to phone.
Does your computer works well with adb and fastboot before ? did you already flash rom ? Maybe a driver is missing or adb/fastboot is not on the last version. You may try with a linux pc to aovid those problem.

From /e/ Os website : https://doc.e.foundation/devices/FP4/install
How to Boot into bootloader mode
This section will be relevant later throughout the guide, when you need to reboot into bootloader mode.
Remove any USB-C cable and turn off your Fairphone 4
Tip: If you cannot turn your device off, remove the battery for about 5 seconds, then put it back in.
Press and hold the Volume Down button.
Insert a USB-C cable connected to the power (can either be a power outlet or a computer).
Release the Volume Down button as soon you boot into bootloader mode
For more details on how to erase the data on your FP4 refer this guide
I just try this and works great : power off the phone (if you can't just remove battery as said), press vol down and plug the usb cable
My phone has the bootloader locked and flashing locked and it works. try this

You are my hero.
I dont know how many times i read that but i was to stupid to do that correctly.
Now i tried it again and it worked well!
Thanks a lot!
Problem solved.
Just for other idiots like me, i choosed the option boot into ffbm into the bootloader menu, this was my mistake.

Question Can not boot any more

Hello comunity,
I installed TWRP on my Galaxy A72 to install Magisk but now I cant Boot any more. Please help my.
I hope you can help me. Moritz

Did you follow all the steps on the XDA thread?
If yes, it could be possible that you additionally need to flash services disabler

Moritz_pro said:
Hello comunity,
I installed TWRP on my Galaxy A72 to install Magisk but now I cant Boot any more. Please help my.
I hope you can help me. Moritz
Click to expand...
Click to collapse
Probably you flashed TWRP image at "fastboot boot TWRPLOL.img" this happens it . now do this,fastboot flash recovery YourTWRP.img then type fastboot reboot then Get your orginal boot.IMG from your Phone version's firmare folder by 7zip or winrar. then do fastboot flash boot boot.img then type fastboot reboot

hey Idk Who can help me for SPOOF(Change by random TEXT) Any android 5.1 to Android8's BASEBRAND Version and KERNEL Version ? How I can change it ? Phone ROOTED and XPosed module ready(not Virtual xposed) ? Please find it or Create new Xposed APK or SUPERuser(ROOT right) APK for Change BASEBRAND and Kernel Version,You know it writes under settings/about phone,Everything changing exclude these.Please Helpme,or if i can do this manually from which file /system or where ?

ineedstoplaggerwatchers said:
Probably you flashed TWRP image at "fastboot boot TWRPLOL.img" this happens it . now do this,fastboot flash recovery YourTWRP.img then type fastboot reboot then Get your orginal boot.IMG from your Phone version's firmare folder by 7zip or winrar. then do fastboot flash boot boot.img then type fastboot reboot
Click to expand...
Click to collapse
I'm not sure if I am understanding all what you are saying right, so please tell me more detailed so I dont't make it worse.

turn of ur phone by holding power button 15 second then wait and be sure phone will not try reboot,then
Press and hold the Power, Volume Down and Home buttons for seconds;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then the device will be the fastboot mode.
get this file then open it (Try open it by 7zip or winrar then extract it there),then click startCMD then type fastboot commands that i talked about it. but first type "fastboot devices" for be sure if it see your fastboot mode phone....... download this https://dl.twrp.me/a72q/twrp-3.6.2_11-1-a72q.img then rename it recovery(Right click on file then click properties and be sure if it says type of file: img file , so fullfile name must be recovery.img then put it into Adb&FastbootCommnderPrayForMe folder then enter this command "fastboot flash recovery recovery.img" then type fastboot reboot then remove cable quick,try power on ur phone, if it still stuck on boot then Poweroff by holding power button 15 second then 2 second later press power button by Volume Up Button together after 3 second later unpress power then continue holding volume up button,If twrp menu opened,swipe right adn go Wipe menu and ONLY chose Clear Cache , then restart phone . if still stuck then go Adb&FastbootCommnderPrayForMe folder and copy recovery.img file to same place and rename it boot(full file name must be boot.img), then go open command then type "fastboot flash boot boot.img" after enter it,Then type fastboot reboot and enter it. if still do same . then Find ur firmware's actual boot.img from your phone device model's firmare version File(firmware versions around 2GB to 10GB)'s boot.img . u can find it in internet too.Hope all works and i will be happy for u too

when I type Fastboot devices my Phone is not regionized what should I do?

Normally PC does not find your device as MTP device while you Hold POWER+home+volumeDown button(I mean fastboot mode without phone bootup).Coz it Shows device as MTP device after Phone bootedup(online).Maybe you tried install its driver as MTP by chosing manual install ? first download and install real usb driver(Adb&fastboot driver) of your samsung phone. https://developer.samsung.com/android-usb-driver then install it. then replug ur phone. Then go Device Manager of your PC,then replug your usb cable,and if you see New Device found like "unknow device or fastboot" then click them then click Properties on it, then click Update driver then click browse for Driver then click Let me pick from list then UNCHECK(unclick) "Show compatible hardware" then find your SAMSUNG ADB driver(if u cant see then click PORTS maybe it installed under Ports drivers) then click next to update it as Fastboot driver . but You can change your PC language to English for See same words in your Pc menus for I help you better coz im not German . but if already your secreen opens ? then you need go phone Settings / about phone/ Tap your phone Firm version 10 times and enable developer menu then enable USB ADB debug for install adb driver easily.if your phone screen not showing anything on screen . then you must just do fastboot mode by fastboot mode keys for install fastboot(samsung android usb driver or ADB driver another name)

When I am in the recovery mode then I see the MTP Window. When I am in the Download Mode I see the other window. I don't now waht the fastboot mode is.

Moritz_pro said:
When I am in the recovery mode then I see the MTP Window. When I am in the Download Mode I see the other window. I don't now waht the fastboot mode is.
Click to expand...
Click to collapse
Ignore what the other guy said above, fastboot is not a thing on Samsung phones. You can make it work with some patches however, but by default there is no fastboot.

ok can you tell me in detail so what do you think is the problem and wehre can I find these patches

Simon1511 said:
Did you follow all the steps on the XDA thread?
If yes, it could be possible that you additionally need to flash services disabler
Click to expand...
Click to collapse
There should be no issues if properly following the XDA thread's instructions.
Moritz_pro said:
ok can you tell me in detail so what do you think is the problem and wehre can I find these patches
Click to expand...
Click to collapse

Thank you for remaining me this option I forgot about it, but I installed a custom Rom, but I'd like to run again on the original software can I install it again. If not, it doesn't matter, but it would be better.

The Rom won't start, the start sign appears but doesn't finish loading.
[ROM][12.1][ENCRYPTION][EOL] LineageOS 19.1 for A52 4G and A72
LineageOS is a free, community built, aftermarket firmware distribution of Android 12.1/12L, which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with...
forum.xda-developers.com