Develop Bugs

GSI ROM Testing (8.1.0)

Successfully flashed emui 8.0 on usa variant without need to rebrand by using hurupdater WOOT AND zero issues encountered
Step 1. all i did was fastboot flash system of 64bit A only gsi resurrection remix
Step 2. make sure you are using stock recovery from huawie and fromat data.
Step 3. reboot && profit
EDIT: side note, apparently people on here are asking if this is for real or not lol. heres a screenshot in here https://imgur.com/a/depZugF
i have tested this rom for about 6 hours and as of now its smooth as butter, havent had a single issue (yet).
pretty sure if you are using emui 8 you are golden to install whatever Aonly GSI you want.
also for bonus i instaled latest magisk and you guessed it is flawless
hoping this is not a duplicate but i cant find a post on this yet
try heading of to treble rom dev and have a go at it guys!
Edit: BIG THANKS TO JAX
download everything except hwota> https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
unlock bootloader
flash nougat compatable twrp (search the dev form)
thanks jax 5. Add the downloaded files to the folder "HWOTA7\Update" and rename two files same as mentioned below->
- update_data_full_public.zip to update_data_public.zip
- update_full_BLN-AL20_all_cn.zip to update_all_hw.zip
-update.zip don't rename.
place all three filles in same folder on sdcard
download hurupdater (search the form)
place it in same folder as the file just mentioned
boot to twrp.
format system data cache
navigate to sdcard the update folder with all four files.
flash hurupdater.zip
press vol down
wait for completion
reboot system
wait 10 minutes
hold power till reboot
boot to recovery and it should be stock.
format data
reboot
should boot up and work flawlessly except for missing browser which can be downloaded :/
woot you are on emui 8 and your partition setup is now oreo
now turn phone off
hold vol down and plug into pc with fastboot tools
go here https://forum.xda-developers.com/project-treble/trebleenabled-device-development
download a oreo rom A only (i used Resurrection Remix)
flash system with fastboot
reboot to recovery
format data
reboot
profit.
BONUS
go here after all said and done https://forum.xda-developers.com/honor-6x/development/rom-emui-8-0-0-honor-6x-dual-sim-t3794079
make sure to thank KingOfMezi
download this https://mega.nz/#!a81EDZAR!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
fastboot flash recovery_ramdisk RECOVERY-V2.img
boot to recovery and flash latest magisk for root goodies

Which emui 8 did you flash ? I have a usa Honor 6x and would like to do the same

pspgarret said:
Successfully flashed emui 8.0 on usa variant without need to rebrand by using hurupdater WOOT AND zero issues encountered
Step 1. all i did was fastboot flash system of 64bit A only gsi resurrection remix
Step 2. make sure you are using stock recovery from huawie and fromat data.
Step 3. reboot && profit
i have tested this rom for about 6 hours and as of now its smooth as butter, havent had a single issue (yet).
pretty sure if you are using emui 8 you are golden to install whatever Aonly GSI you want.
also for bonus i instaled latest magisk and you guessed it is flawless
hoping this is not a duplicate but i cant find a post on this yet
try heading of to trble rom dev and have a go at it guys!
Click to expand...
Click to collapse
is themes apps working for you? flashing emui 8 via huru will give incomplete flash.

This was possible for the US variant ( L24) since July. It was mentioned couple times before. I think using hwota is a cleaner way of upgrading.

How do you do it?, Where is the links of the files?

thanks for responses, i updated the op and hopefully that is a bit more informative.
let me know if it is confusing at all and ill try to fix it

Can i flash p gsi.? (havoc 2.0)
And.. Is volte working..?

If I am not wrong I think volte will not work on any custom roms except for a stock based custom room because Huawei hasn't released source for it. Dunno I could be wronf

jhorne917 said:
If I am not wrong I think volte will not work on any custom roms except for a stock based custom room because Huawei hasn't released source for it. Dunno I could be wronf
Click to expand...
Click to collapse
It's not a custom rom... It's gsi

anyone tested other gsi? i only tried open kirin roms

are you sure it didn't rebranded? at about information, it say bln-24 or bln-al20? it could brick the phone, I thinks is better using the emui 8 from india instead the china version

hey guys, any A ONLY GSI ROM should work. i used treble resurrection remix NOT openkirin as the op states.
and i DID NOT rebrand, it states in rom info i am BLN-L24 -thats usa ver.

pspgarret said:
hey guys, any A ONLY GSI ROM should work. i used treble resurrection remix NOT openkirin as the op states.
and i DID NOT rebrand, it states in rom info i am BLN-L24 -thats usa ver.
Click to expand...
Click to collapse
You went from android7 to RR based on android8 without rebranding and updating to stock android8 ?

Nollie8969 said:
You went from android7 to RR based on android8 without rebranding and updating to stock android8 ?
Click to expand...
Click to collapse
op states i upgraded to emui 8 using nothing but hurupdater script and update packages in 7.x twrp buddy
https://imgur.com/a/depZugF

That's great man, i need to backup a lot of stuff since last TWRP backup, but I'm definitely gonna do this. I own a BLN-L21, so i hope this'll works the same as on any other variant, and that would be the real gem in all of this. Thanks for sharing

galapagos said:
This was possible for the US variant ( L24) since July. It was mentioned couple times before. I think using hwota is a cleaner way of upgrading.
Click to expand...
Click to collapse
Link to guide for the hwota method of upgrading bln-l24 to EMUI 8 without rebranding?

You mean the guide: How to brick your phone ?

Nollie8969 said:
You mean the guide: How to brick your phone ?
Click to expand...
Click to collapse
That's helpful and informative.

johnnyrichter said:
Link to guide for the hwota method of upgrading bln-l24 to EMUI 8 without rebranding?
Click to expand...
Click to collapse
Searching for "hwota7" gives you this: https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
In short, all you have to do is put the oreo firmware files (L22 version, not the Chinese version) in the update folder and run the batch script. Choose L24 region during the process and you're done. I've done this at least couple dozen times as I frequently test out all treble ROMs as they're released/updated, and sometimes go back to nougat in case I find something that's not compatible with oreo. But all in all, this oreo ROM is very stable and is my daily driver.

galapagos said:
Searching for "hwota7" gives you this: https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
In short, all you have to do is put the oreo firmware files (L22 version, not the Chinese version) in the update folder and run the batch script. Choose L24 region during the process and you're done. I've done this at least couple dozen times as I frequently test out all treble ROMs as they're released/updated, and sometimes go back to nougat in case I find something that's not compatible with oreo. But all in all, this oreo ROM is very stable and is my daily driver.
Click to expand...
Click to collapse
During your testing, which ROM has been the most stable in terms of daily-driver use so far? Last year after getting this 6x I tried a few different ROMS, back before OpenKirin happened, and had nothing but problems with boot loops and etc so I went back to stock EMUI5. Few days ago I got B365 and then B376 via OTA after installing the Huawei software on my PC. This phone really makes me miss my S5 with LineageOS.

[ROM] TWRP Flashable Stock Firmware [7.0][8.1.0]

[size=+2]TWRP Flashable Stock builds for the Moto G4/G4 Plus[/size]
As you all know, Moto has finally released the first Oreo soak test for select users to test. Thanks to @rajatgupta1998, we all get to try it out
[size=+1]About these builds[/size]
This is the stock firmware, repackaged to be flashable in TWRP Recovery. In an effort to make these zips safer, I have removed all bootloader and gpt (partition table) related items.
[size=+1]Requirements[/size]
-> Unlocked bootloader
-> TWRP Recovery Installed (or booted)
[size=+1]Installation[/size]
-> Download the TWRP Flashable zip (Links below)
-> Place zip on device (internal or external storage)
-> Reboot to TWRP (or boot it)
-> Flash zip && Profit
[size=+1]Downloads[/size]
Nougat 7.0 (April 1st Security Patch)
• AFH -- TWRP-athene-7.0.0-NPJS25.93-14-18.zip
• G-Drive -- TWRP-athene-7.0.0-NPJS25.93-14-18.zip
md5sum == 71cab7a1bdebb067c569366dcaa26968
Oreo 8.1.0 Soak Test (November 1st Security Patch)
• AFH -- TWRP-athene-8.1.0-OPJ28.108.zip
• G-Drive -- TWRP-athene-8.1.0-OPJ28.108.zip
md5sum == c995bcb22215346e362195447de686f8
Oreo 8.1.0 (December 1st Security Patch)
• AFH -- TWRP-athene-8.1.0-OPJ28.111-12.zip
• G-Drive -- TWRP-athene-8.1.0-OPJ28.111-12.zip
md5sum == d7f7a0acdbb8e4bd24fa89e8513ec21c
Oreo 8.1.0 (December 1st Security Patch)
• AFH -- TWRP-athene-8.1.0-OPJ28.111-22.zip <-- coming soon
• G-Drive -- TWRP-athene-8.1.0-OPJ28.111-22.zip
md5sum == coming soon
[size=+1]Other Notes[/size]
* If you want to root, use Magisk and just flash in TWRP immediately after flashing the newest Oreo build. The latest build now fully passes SafetyNet and shows the device as being Certified in the Play Store.
* If you're already on the previous Oreo build (OPJ28.108 - November Security Patch), you can easily update to the latest Oreo build (OPJ28.111-12 - December Security Patch) by dirty flashing. If you want to keep root, you'll still need to flash Magisk again after flashing the newer build.
* To root the Nougat build(s), you will need to flash a custom kernel, then flash Magisk (same as before).
[size=+2]XDA:DevDB Information[/size]
[size=+1]TWRP Flashable Stock Builds, ROM for the Moto G4/G4 Plus[/size]
Contributors
@Jleeblanch, @rajatgupta1998, Motorola Mobility LLC
ROM OS Version: Android Oreo 8.1.0 - December 1st Security Patch
ROM Kernel: v3.10.84
Version Information:
Status: Beta
Created: 2018-11-26
Last Updated: 2019-01-09

**Reserved**

Coming from Pixel Experience 9.0 rom, wiped and installed. Working great so far. I hope we see an official rom soon.

zerocoolriddler said:
Coming from Pixel Experience 9.0 rom, wiped and installed. Working great so far. I hope we see an official rom soon.
Click to expand...
Click to collapse
these ROM have the same problems with camera like a soak test bulid?
all wipes needed to install these ROM?

vlrgamaley said:
these ROM have the same problems with camera like a soak test bulid?
Click to expand...
Click to collapse
This IS the Moto Soak test build. I've just made it TWRP flashable and safer for everyone to use. But yes, to answer your question, the issue with the Camera and Flashlight tile taking a few (5 or more) seconds to open is present here. There isn't anything I can do about that, however when Moto releases a future OTA update and have fixed the issue, I will make a new zip and post it here.
I will also make a nougat build of NPJS25.93-14-18 that is TWRP flashable as well for anyone who would like to be on stock nougat or easily revert back to stock nougat.

Thanks for your Hard Work.

Jleeblanch said:
ROM OS Version: Android Oreo 8.1.0 - November 1st Security Patch
ROM Kernel: v3.10.84
Click to expand...
Click to collapse
For curiosity: Would any of the (32 bit) custom kernels work with this ROM?

Thanks, I guess I won't be bored until I decide to unlock my G6 Plus

Jleeblanch said:
[size=+1]TWRP Flashable Stock builds for the Moto G4/G4 Plus[/size]
As you all know, Moto has finally released the first Oreo soak test for select users to test. Thanks to @rajatgupta1998, we all get to try it out
About this build
What is different about this versus what's already available? Basically what I have done is taken the previous 7.0 (nougat) firmware and directly patched it using the 8.1.0 (oreo) OTA zip from this thread. In an effort to make this build safer for everyone to use, I have left out any bootloader related items which is what can potentially prevent you from being able to downgrade. If this had been an official release, I would also have removed dm-verity (and forced encryption) as needed also. But being this is a test build from Moto, they have yet to enable such features. Now, on to the good stuff.
Requirements
-> Unlocked bootloader
-> TWRP Recovery Installed (or booted)
-> You may or may not need to be on stock nougat prior, need confirmation on this
Installation
-> Download the TWRP Flashable zip (Links below)
-> Place zip on device (internal storage or external)
-> Reboot to TWRP (or boot it)
-> Flash zip && Profit
Downloads
Oreo 8.1.0 Soak Test (November 1st Security Patch)
AFH - TWRP-athene-OPJ28.108.zip
G-Drive - TWRP-athene-OPJ28.108.zip
md5sum = c995bcb22215346e362195447de686f8
Other Notes
Currently as mentioned in the other thread, the build doesn't fully pass SafetyNet as it's a test release. You can use Magisk modules to fix this if needed.
You can also easily root by flashing Magisk immediately after the TWRP zip or any time afterwards.
[size=+2]XDA:DevDB Information[/size]
[size=+1]TWRP Flashable Stock Builds, ROM for the Moto G4/G4 Plus[/size]
Contributors
@Jleeblanch, @rajatgupta1998, Motorola Mobility LLC
ROM OS Version: Android Oreo 8.1.0 - November 1st Security Patch
ROM Kernel: v3.10.84
Version Information:
Status: Beta
Created: 2018-11-26
Last Updated: 2018-11-26
Click to expand...
Click to collapse
Thanx your .zip fixed the sim issues . Thanx mate

Jleeblanch said:
This IS the Moto Soak test build. I've just made it TWRP flashable and safer for everyone to use. But yes, to answer your question, the issue with the Camera and Flashlight tile taking a few (5 or more) seconds to open is present here. There isn't anything I can do about that, however when Moto releases a future OTA update and have fixed the issue, I will make a new zip and post it here.
I will also make a nougat build of NPJS25.93-14-18 that is TWRP flashable as well for anyone who would like to be on stock nougat or easily revert back to stock nougat.
Click to expand...
Click to collapse
Waiting for the Nougat build! Really need to go back to stock. Thank you for your work!

Awesome work dont stop keep up the good work

I`ve had previously RR 5.8 (Nougat 7.1, no custom kernels) and try install your ROM (without wipes, like you describe in instruction). Result? Bootloop. I have Moto 2g RAM/16 Gb Flash, install through rajatgupta recovery v 3.2.1-r3. Try now with wipes, but i don`t have confidence for good result.
try again with wipes, works normally. woah

jer194 said:
For curiosity: Would any of the (32 bit) custom kernels work with this ROM?
Click to expand...
Click to collapse
I doubt any of the stock kernels currently available would work as they're intended for nougat (7.0).
corlatemanuel said:
Thanks, I guess I won't be bored until I decide to unlock my G6 Plus
Click to expand...
Click to collapse
Fair enough. I'm surprised you haven't unlocked the bootloader yet, LineageOS is pretty good for the G6+ and also is used as a base ROM for flashing GSI's. I'll be making a stock based custom kernel (and one for the custom rom's/GSI's soon too).
DanFaraday777 said:
Waiting for the Nougat build! Really need to go back to stock. Thank you for your work!
Click to expand...
Click to collapse
I gotta finish up some TWRP flashable builds for the Moto G6 and then I'll upload the one I made for nougat when I upload those [emoji41]

luv u
thanks a lot

Thanks for zip :good:

What do you mean by "Stock nougat prior"?
Sorry for the dump question

Henry Markle said:
What do you mean by "Stock nougat prior"?
Sorry for the dump question
Click to expand...
Click to collapse
I mean the latest stock nougat build NPJS25.93-14-18

jer194 said:
For curiosity: Would any of the (32 bit) custom kernels work with this ROM?
Click to expand...
Click to collapse
To expand on Jleeblanch's reply, you may have to wait for Motorola to release the Oreo kernel source code, so developers can work on improving the kernel. Best thing to do is to check the Motorola Mobility GitHub page every so often, where you may see a request for the Oreo source code for our device appear https://github.com/MotorolaMobilityLLC/kernel-msm/issues Once there's a request made, Motorola should release the code when it's ready for release and then pave the way for custom Oreo kernels

echo92 said:
To expand on Jleeblanch's reply, you may have to wait for Motorola to release the Oreo kernel source code, so developers can work on improving the kernel. Best thing to do is to check the Motorola Mobility GitHub page every so often, where you may see a request for the Oreo source code for our device appear https://github.com/MotorolaMobilityLLC/kernel-msm/issues Once there's a request made, Motorola should release the code when it's ready for release and then pave the way for custom Oreo kernels
Click to expand...
Click to collapse
I would make the request myself, same as I've done for other devices (currently have a request up for beckham) but being that this is supposed to be a private soak test, not sure if they'll appreciate it just yet. But best believe, when they release the official Oreo build, I'll be all over it (assuming someone doesn't beat me to it [emoji6])

Jleeblanch said:
I would make the request myself, same as I've done for other devices (currently have a request up for beckham) but being that this is supposed to be a private soak test, not sure if they're appreciate it just yet. But best believe, when they release the official Oreo build, I'll be all over it (assuming someone doesn't beat me to it [emoji6])
Click to expand...
Click to collapse
Oh yup, it'd probably be a bit soon to put in a request, and I imagine they may change the kernel source code for the final release anyway (e.g. if they update to the latest security patch). Thanks for keeping a close eye on it - exciting times ahead

[ROM] Custom Recovery Flashable Stock Firmware for Realme X [RMX1901]

This is a custom recovery flashable pure stock firmware. It is based on the A.07 ozip which was released as RMX1901EX_11_OTA_0070_all_6m8Kht2yFPh5.ozip on official realme website. Until kernel source is completed, i'll keep working on it.
Prerequisites
Unlocked bootloader
Custom recovery installed (TWRP/PBRP/Orange Fox)
Recommended:
TWRP Here
PBRP : Here
Instructions
Dirty Flash:
1. Download
2. Reboot to recovery
3. Select install & choose the zip
4. Swipe to flash
5. Reboot
Clean Flash:
1. Download
2. Reboot to recovery
3. Wipe all (cache, dalvik-cache, system, data, internal storage)
4. Select install & choose the zip
5. Swipe to flash
6. Format data
7. Reboot
Recommended: Clean Flash
Features
For now, it's pure stock. Nothing fancy here.
Just a life saver for whom who messed with system/vendor and have no backup.
Bugs
Clean Flash:
1. Nothing, you tell me.
2. Didn't tested OTG, i don't have one.
Dirty Flash:
1. Maybe it is going to inherit the bugs you have currently, again maybe it could fix them (i.e i dirty flashed when the google/fb/twitter sign in are crashing with blank screen and it fixed that)
2. MTP didn't let linux to access the files though it was showing all.
3. You report me yours.
Stock Firmware Info
Build Number: RMX1901EX_11_A.07
Security Patch: August 5, 2019
To Do
1. remove bloatwares.
2. make it a very minimal zip.
3. another variant with pre root.
4. any other good things if i forgot to mention.
Note: I don't have broadband bandwidth to frequently update this. I'll update once it's debloated or on some major changes.
Screenshots
I forgot to take screenshots because i was recording. Again it's 2 GB of recording and compressing to upload to youtube tomorrow. Though i have some pictures from other device. You can find those in screenshots section.
Downloads
Google Drive
Support Development
If you are capable, you should support development. I have the device in hand, have a good pc only thing missing is the bandwidth. I use mobile internet & have to do recharge for every upload or download. If you are willing to support, below is my address.
Google Pay (UPI): [email protected]
See you in future update.
XDA:DevDB Information
Recovery Flashable Stock ROM For Realme X, ROM for the Realme X
Contributors
chankruze
Source Code: https://www.realme.com/in/support/software-update
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Unlocked Bootloader, Custom Recovery
Based On: RMX1901EX_11_A.07
Version Information
Status: Stable
Current Stable Version: 0.0.2
Stable Release Date: 2019-09-29
Created 2019-09-28
Last Updated 2019-09-29

Can China variant flash this? Thx

is everything working fine? volte, camera, fingerprint?

At last have been asking Ajit for long time xD

nickyip123 said:
Can China variant flash this? Thx
Click to expand...
Click to collapse
Which firmware you use ?
If you use official firmware from here, then it should work.
vikasjangid said:
is everything working fine? volte, camera, fingerprint?
Click to expand...
Click to collapse
Yes, Camere (both front and back), fingerprint and VoLTE.

Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?

can i flash into my china realme x, i am running RMX1901CN_A17 version.

Its Just the same old color OS.
vikasjangid said:
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
Click to expand...
Click to collapse
Title is misleading in some sense. Arghhh i just wiped my phone and did all the steps just to find its just the stock color os.

indroider said:
At last have been asking Ajit for long time xD
Click to expand...
Click to collapse
what?

About this flashable a07 zip .. Remember in group.. Raunaq ..?
 @4j17h
I asked u about making this zip few weeks ago

Does jio volte work on Indian variant?

ghostEye said:
Title is misleading in some sense. Arghhh i just wiped my phone and did all the steps just to find its just the stock color os.
Click to expand...
Click to collapse
The title says stock os ,
The features says stock os nothing fancy. You got exactly what is said. Nothing is misleading here.
---------- Post added at 07:41 PM ---------- Previous post was at 07:35 PM ----------
vikasjangid said:
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
Click to expand...
Click to collapse
it is color os as described clearly.

indroider said:
About this flashable a07 zip .. Remember in group.. Raunaq ..?
@4j17h
I asked u about making this zip few weeks ago
Click to expand...
Click to collapse
ahha Raunaq yes, I remember you.

Can we flash it on oppo k3 ?
Oppo k3 have the same hardware as realme X just the camera is 16mp ( same sensor as realme 3 pro), so can we flash this rom and change the camera app ?

Hello, on chinese model I receive error 7 (error patching system image), can you help me?

Hey
I am new to this segment
Please explain, if I wipe my internal storage also, from where will I install the custom rom?
Isn't the custom rom should be kept in the internal storage before installing?

phone is stuck in bootloop.
my phone is stuck on realme logo and reboot to recovery what should i do now?i am not able to boot my phone even with other roms like aosp. please help!!

Please make it flashable in Chinese variant too.thanks in advance

How to root this rom? What magisk do you use?

djozgandoz said:
How to root this rom? What magisk do you use?
Click to expand...
Click to collapse
Note:- Rooting stock rom with magisk will only work in core only mode. Hence no modules are going to be loaded.
Both 19.4 & 20.0 working. Flash the zip from recovery mode.

Question 11.2.4.4.LE15BA Download (EU)

Hello,
where can I download the 11.2.4.4.LE15BA (EU) version?
I want to patch the boot.img and have a copy when something goes wrong.
Thanks

Try Oxygen Updater from Playstore or
[OnePlus 9 Pro][ROM][OTA][Oxygen OS] Repo of Oxygen OS Builds
As OnePlus doesn't always provide download links for all of their OxygenOS ROMs & OTA update zips, we've created an index to put the links in one post so that they're easy to find. Note: This is not a support thread for issues you may have with...
forum.xda-developers.com

beli3ver said:
Hello,
where can I download the 11.2.4.4.LE15BA (EU) version?
I want to patch the boot.img and have a copy when something goes wrong.
Thanks
Click to expand...
Click to collapse
If you do a little searching, there’s actually a dedicated thread for all of the versions and a little bit more searching will lead you to the untouched/patched boot.img for that version.

can't flash with odin even though bootloader being unlocked

i've got an a50 that i want to install TWRP on so i won't have to use the abomination that download mode is. i've unlocked bootloader, yet when i try to flash the TWRP .tar in odin it fails and the phone gives the following error code: "Only officially released binaries are allowed to be flashed(RECOVERY)"
although this is the first time i try flashing stuff on a samsung so you can consider me a newbie, i've got experience with fastboot on others so it must be something i glanced over.
cuz see, when i unlock the bootloader of other phones they let me flash onto them, unlike this one. if you could redirect me to a post with a solution or something that would be very much appreciated!

If you are on the latest official build, then The latest official build (last official Update from samsung) won't allow the twrp to be installed.
Use previous build to install twrp.

Sharath Mane said:
If you are on the latest official build, then The latest official build (last official Update from samsung) won't allow the twrp to be installed.
Use previous build to install twrp.
Click to expand...
Click to collapse
wdym older build? flash an older oneui or use older odin, cuz odin is old enough already.

Which oneui build you are using? January ?
Dowgrade to october build.

Join telegram group (Samsung galaxy A50 official) for having better assistance.

Only officially released binaries are allowed to be flashed
Click to expand...
Click to collapse
This remembers me on my SM-A202F Adventure...
Seems "buggy" Bootloaders... in my case sboot.bin as SM-A202F Exynos...
I was able to fix this "phenomenon" with other Firmware...
Best Regards

Sharath Mane said:
Which oneui build you are using? January ?
Dowgrade to october build.
Click to expand...
Click to collapse
can you point me to a site for downloading the october build? furthermore, my plans are to do whatever it takes to get twrp onto it and just flash the unofficial a50 port of lineageos (+official gapps) and debloat with the permission of the owner of the phone. any problems to look at for in the future (seeing that you're a senior here)?

If SM-A505F is your device...
Look here for official collection of Firmware:
Samsung Galaxy A50 Firmware Download SM-A505F Free Download
Samsung Galaxy A50 Firmware Download SM-A505F Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
Otherwise replace SM-A505F with your Model Name...
Best Regards

pKalmam said:
can you point me to a site for downloading the october build? furthermore, my plans are to do whatever it takes to get twrp onto it and just flash the unofficial a50 port of lineageos (+official gapps) and debloat with the permission of the owner of the phone. any problems to look at for in the future (seeing that you're a senior here)?
You can proceed.
The problems you may get with FOD, VoLTE. Some operators like Jio completely depend on volte . Without volte we can not make calls and receive messages. Only internet Anwould work.
No aosp rom able to make work volte. For now, volte works only on oneui roms for a50.
Click to expand...
Click to collapse

so if i'm reading this correctly, the device won't be able to make calls if i don't use oneui?

pKalmam said:
so if i'm reading this correctly, the device won't be able to make calls if i don't use oneui?
Click to expand...
Click to collapse
You can make calls, just not through LTE (4G) or that's what I know

fran6325 said:
You can make calls, just not through LTE (4G) or that's what I know
Click to expand...
Click to collapse
aight thanks i'll just remove the samsung bloatware from oneui and stick with it then