How to unlock Huawei E8372 usb modem - Upgrading, Modifying and Unlocking

Hi,
I need to unlock this modem plz
Device name: E8372h-153
IMEI: 866649043227906
IMSI : 602030119114274
Hardware version: CL1E8372HM
Software version: 21.321.01.00.37
Web UI version: 17.100.15.03.37
i have tried to calculate unlock code but failed
and tried to unlock using `dc-unlocker2client_1.00.1436` and failed
tried to unlock using following command `AT^NVWREX=8268,0,12,1,0,0,0,2,0,0,0,A,0,0,0` and also failed
Plz help me on this

Related

Can mtty erase startup logo in trinity ROM?

I have my trinity briked and want to bring it to service centre. But ROM version I tried to flash before briking was in different region which may breach the warranty.
Now it boots and stops with a start up logo in different language. I am worried that service centre may refuse my repair request. Can I erase the image file from ROM? or any suggestion to avoid showing this screen? It is possible to use mtty and erase the image file? where is the image files' address? or how to erase the main ROM so that it will not show the image?
I tried most of the recovery method from here http://forum.xda-developers.com/showthread.php?t=286755 but still failed. My case is "Hybrid Bricks: combinations of both type 1 and type 2 bricks"
Model: D810 (trinity)
ROM Before Flash: 1.??
Radio Before Flash: 1.07??
Bootloader Before Flash: 1.07.??
Flash failed at: It seems completed at 100% but cannot boot after finish all
Flashing ROM: 1.23
Flashing Radio: 1.13.00
Bootloader After Failure: 1.07.0000
tried unlock and using SSPL to flash
CID Before Failure Super CID: tried unlock but don't know if success
CID Corrupt: Yes, info 2 shows HTCSF ?? HTCE
Radio Corrupt: Yes
No GSM Error: Yes
Stuck In Bootloader: No
Stuck On Windows Mobile Splash: Yes
Can boot into OS: No
Tried mtty command set 14 0: Yes
Tried wiki problem number 5: Yes
mtty info 2 output: CID: HTCSF ?? HTCE
Current Device Status: hang at welcome screen when power on

encrypted - no access data / sd card

Hello,
I need your help.
I enabled the encryption. Then, system cache and deleted. When trying to delete data, now get this error:
s: can not mount / sdcard
error mounting / data!
skipping format ...
done
To install the factory image does not work. I tried using fastboot-w and galaxy nexus toolkit.
Sorry, was stupid of me.
How do I get out again?
Thank you ...
Data:
Product Name: Tuna
Variant: maguro 16 GB
HM Version: 9
Bootloader Version: Primela03
Carrier Info: None
Serial Number: xxxx
signing: Production
Lock State: Unlocked

Need Help/Z3X Box and Emei/Serial FAIL!

first all hello and thankz for this forum...
things i did
root
unlock
Save QCN
Enter "*#0808#" Select "DM+Modem+ADB".
=========================================
*#9090# = DM OVER UART
ok first i did get all done right but then phone restart it and no serial or emei did not show...
Selected model: M919
Selected port: COM11 SAMSUNG Mobile USB Serial Port
Selected port speed: 115200
Searching ADB device... OK
Reading phone info...
Model: SGH-M919
Android version: 4.4.4
Product code: Not Active
Phone version: M919UVUFNH7
PDA version: M919UVUFNH7
CSC version: M919TMBFNH7
IMEI: 99000206XXXXXXXX
Phone S/N: FR8DC08XXXKB
Checking Super user right... true
Backuping MMCBLK... OK
Checking phone at COM11
Detected ID: 00000FE6 (SURF9615)
SW Version: M9615A-CEFWTAZM-4.0.17173
Reading ESN... OK
Backuping RFNV... OK
Backuping Feature Mask... OK
Backuping NV Item... OK
Backuping NV Item SIM1... OK
Backuping NV Item SIM2... OK
Backuping Provisioning Item Files... OK
Writing data to phone... OK
Reseting EFS... OK
Rebooting phone... OK
Waiting phone... OK
Reading phone info...
Model: SGH-M919
Android version: 4.4.4
Product code: Not Active
Phone version: M919UVUFNH7
PDA version: M919UVUFNH7
CSC version: Unknown
IMEI: Unknown
Phone S/N: Unknown
Bypass MSL... error
Done with Samsung Tool v.18.5
=============================================
I try to write Save QCN and still do not fix it,,,,
=============================================
Selected model: M919
Selected port: COM11 SAMSUNG Mobile USB Serial Port
Selected port speed: 115200
Searching ADB device... OK
Reading phone info...
Model: SGH-M919
Android version: 4.4.4
Product code: Not Active
Phone version: M919UVUFNH7
PDA version: M919UVUFNH7
CSC version: M919TMBFNH7
IMEI: Unknown
Phone S/N: Unknown
Checking Super user right... true
Backuping MMCBLK... OK
Checking phone at COM11
Detected ID: 00000FE6 (SURF9615)
SW Version: M9615A-CEFWTAZM-4.0.17173
CSC version: Unknown
IMEI: Unknown
Phone S/N: Unknown
Bypass MSL... error
Done with Samsung Tool v.18.5
UPDATE**
I have manage to fix emei with a QCN i have download it here..
M919_M9615A-CEFWTAZM-4.0.17173_10-11-2014_20-19-24
i get EMEI but still no Serial i have try restore QCN with back up and still all the same, i f i do that and restore QCN i lost EMEI no mater what...
NOW Look at this
Selected model: M919
Selected port: COM11 SAMSUNG Mobile USB Serial Port
Selected port speed: 115200
Searching ADB device... OK
Reading phone info...
Model: SGH-M919
Android version: 4.4.4
Product code: SGH-M919ZWATMB
Phone version: M919UVUAMDL
PDA version: M919UVUFNH7
CSC version: M919TMBFNH7 <<<<<<<<<Here i get CSC >>>>>>>>>>>>>>>>
IMEI: 359086051XXXXXXX
Phone S/N: 00000000000 <----------------NO SERIAL
Checking Super user right... true
Backuping MMCBLK... OK
Writing data to phone... OK
Rebooting phone... OK
Waiting phone... OK
Reading phone info...
Model: SGH-M919
Android version: 4.4.4
Product code: Not Active
Phone version: M919UVUAMDL
PDA version: M919UVUFNH7
CSC version: Unknown <<<<<<<<<< NOW NO CSC >>>>>>>>>>>>>>>>>>
IMEI: Unknown
Phone S/N: 00000000000
Bypass MSL... error
Done with Samsung Tool v.18.5
Done with Samsung Tool v.18.5
Now after all this I still di not get phone to work on eather simple or Tmobile ....
Aim using z3x box via usb......cause to be honest I can get the 3000k of 7070 cable to work via uart.... to confusing...if some can explain how to used that I will be thanks full to you all.....pleaaaaseeeee:crying:

Want to go back to stock, but can't do anything!

Hello,
I have receveid this phone as a gift, but I can't find how to upgrade it to the latest stock.
First of all, this is my situation:
Code:
MID: PN0731000 (from what I've understand it means stock)
CID: 11111111 (what's this?! it seems a developer thing, should I change it to HTC__405 (italian?) or it's not important?)
Security: Off (maybe this is one of the problems?)
I think I have the stock recovery, even if I'm not sure.
Current build: 5.28.605.2.CL365669 release-keys
Band version: 1.13.41.0421
Software number: 5.28.602.2
PRI Version: 4.74_002
PRL Version: 00000
ERI Version: 5
Fastboot/bootloader: locked
What I'd like to do, as I said, is go back to the latest stock (5.0.2?), I don't need everything stock, I'd just like to have the latest stock ROM or something similar (if it's with no bloatware and some optimization, it's ok).
What I can do:
I can use fastboot, I can access it and it seems it works.
What I can't do
Everything I have tried gave me a: FAILED (remote: not allowed) or FAILED (remote: 41 model id check fail)
I have tried with some official HTC roms from the HTC site and I've got "wrong model", I've tried with the verizon software and it asks to repair before upgrade, but repair can't find the assistant software (under status it says software unknown).
I've read I need to find PN0731000 RUUs' compatible, but I couldn't find any, they all have a different MID.
Please help, I'm desperate!
Thank you.

HTC D820U Bootloop and need stock rom

I am using HTC D820U. It's not starting. Getting in boot loop(if i Power on it will load htc logo and again get restart continuously).
The phone is not rooted and no usb debugging enabled. I tried some of rom to flash but failed. My device details are:
Model : A51_DTUL
IMEI : 357585061416003
Build : 3.17.720.3
CID : HTC__038
HBoot : 3.19.0.0000
MID : 0PFJ10000
Security : ON
Region : ASIA_INDIA
Can Any one please help me on this.

Categories

Resources