Related
A modified xposed installer and framework for nougat is now available thanks to the Purify os team and rovo
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
Follow the link above.
1. Make backups, twrp/titanium
2. Install the modified xposed installer first, must be done first!
https://forum.xda-developers.com/devdb/project/?id=13191#downloads
Use the top one on the list it may get updated
3. Next download the modified xposed framework from Purify here
http://fastkit.org/xposed/
Follow the links.... SDK24 for nougat 7.0..... Then download the xposed version 87 model... Flash from twrp
Again make sure you fully back up, it all went fine for me, but sometimes these things don't go right.
Plenty of posts in the linked forum but a bit of a jumble as usual, all with varied results, but the above will work for us.
Not sure how many modules are usable yet, I have one working so I know it does work.
Which are you using, and what would you like to use?
undrwater said:
Which are you using, and what would you like to use?
Click to expand...
Click to collapse
Status bar sleep.. Working
Status bar download progress.... Working (mostly)
Status bar cpu temp.. Not working
Status bar cpu frequency.. Not working
Any of the status bar theming such as wanams xtouchwiz would be good
Also xinternalsd was useful but not working
Can you change aspect ratio yet?
blaze82 said:
Can you change aspect ratio yet?
Click to expand...
Click to collapse
Not something I would normally do, is there a particular module you use for that?
It's been such a long time since I came across this, being able to adjust screen ratio and dpi on a per app basis. No real reason to now but with the 4:3 ratio on this tab, it'll be nice.
Also, been a while since I've used xbosed
does not work for me.. i get a recovery-boot loop and it does not start the system
Ch3ck3rM0n said:
does not work for me.. i get a recovery-boot loop and it does not start the system
Click to expand...
Click to collapse
I have been using it without problem for a while, but the versions used are crucial to success, I couldn't get the magisk systemless to work. Try going back to the beginning and make sure each download is correct, the method in the first post will work.
hmm.. but i need magisk :-/
Ch3ck3rM0n said:
hmm.. but i need magisk :-/
Click to expand...
Click to collapse
Ok, it may be possible for it to work, I didn't persist with it, what is the benefit with magisk for you?
rorymc928 said:
Ok, it may be possible for it to work, I didn't persist with it, what is the benefit with magisk for you?
Click to expand...
Click to collapse
Get it work with super su but installed OBBonSD does not work (with GTA, KotoR,...). Do you have any idea?
EDIT: Found a solution with http://repo.xposed.info/module/com.pyler.xinternalsd
I have followed the directions exactly and I tried twice to install xposed on my t825 rooted with magisk 14. No luck unfortunately. Has anybody been successful in installing it ??
If yes, could he share the methodology ?
xpil said:
... with magisk 14
Click to expand...
Click to collapse
had the same problem.. remove magisk and install superSU.. xposed do not work with magisk -.-' on this tablet..
Question, how do I remove xposed again?
Can I do it with the installer app, or do I need a special skript? Never used Xposed on Samsung before and I know everything works differently.
Hello,
Your experience : Do you have a "" Tab S3 SM-T825, Nougat 7.0, Root SuperSU "" on which you have installed Xposed.
1- Does Xposed work normally with different modules?
(No Bootloop or tablet block?)
2 - Which version xposed * .zip ?
3 - Which Version XposedInstaller _ *. Apk ?
Thank you
Cordially
Yam_y
Yam_y said:
Hello,
Your experience : Do you have a "" Tab S3 SM-T825, Nougat 7.0, Root SuperSU "" on which you have installed Xposed.
1- Does Xposed work normally with different modules?
(No Bootloop or tablet block?)
2 - Which version xposed * .zip ?
3 - Which Version XposedInstaller _ *. Apk ?
Thank you
Cordially
Yam_y
Click to expand...
Click to collapse
Fairly old thread this, I have a T820, however I've made roms for both variants, the t825 thread is here,
https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t825-tweaked-t3769742
the earlier versions are nougat the latest 3.0 on are oreo both work fine, you'll find instructions in the thread, if changing to oreo you need to flash the oreo bootloader, through odin, if returning to nougat you need to flash the older nougat bootloader as they're not cross compatible.
Xposed works fine on both, xposed installer included after booting, start the xposed installer app and select install it picks the correct version.
Root is by magisk.
rorymc928 said:
Fairly old thread this, I have a T820, however I've made roms for both variants, the t825 thread is here,
https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t825-tweaked-t3769742
the earlier versions are nougat the latest 3.0 on are oreo both work fine, you'll find instructions in the thread, if changing to oreo you need to flash the oreo bootloader, through odin, if returning to nougat you need to flash the older nougat bootloader as they're not cross compatible.
Xposed works fine on both, xposed installer included after booting, start the xposed installer app and select install it picks the correct version.
Root is by magisk.
Click to expand...
Click to collapse
Hello Rorymc
Thanks for the answer and for the link SM-T825 TWEAKED, but I'm already Root with SuperSU + Dm-Verity with Rom ARA2 Nougat 7.0 and I just have to flash Xposed with TWRP.
So, I think I have to take Xposed.zip and Xposedinstaller APK from rovo89 in pure version without add and unmodified ?
I hope I'm not mistaken .....
Cordially
Yam
Yam_y said:
Hello Rorymc
Thanks for the answer and for the link SM-T825 TWEAKED, but I'm already Root with SuperSU + Dm-Verity with Rom ARA2 Nougat 7.0 and I just have to flash Xposed with TWRP.
So, I think I have to take Xposed.zip and Xposedinstaller APK from rovo89 in pure version without add and unmodified ?
I hope I'm not mistaken .....
Cordially
Yam
Click to expand...
Click to collapse
Yes that's correct, just make sure you get the correct versions, if anything goes wrong just restore your backup.
rorymc928 said:
Yes that's correct, just make sure you get the correct versions, if anything goes wrong just restore your backup.
Click to expand...
Click to collapse
Hello,
Thank you. Well understood. I like your precise answers
Cordially
Yam
Disclaimer: I am not a developer (I don't code), but I have been flashing ROMs for many devices over the years. This is more of a practical guide from an end-user perspective in pursuit of finding the best ROM for this magnificent hardware. This is more of a compilation of all the relevant information I found. I'm very open to suggestions/corrections that could improve this.
Disclaimer: Only tested with RR, PixelExperience, and ArrowOS GSI.
I haven't seen a proper guide to flash GSI ROMs for Mi Mix 3, thus I decided to share what I know that works. I put a brief explanation for each step below.
1. Unlock Bootloader - If you haven't done so yet, I recommend following the instructions in https://www.reddit.com/r/Xiaomi/wiki/bootloader
2. Install TWRP
a) I recommend to use the official TWRP from this link https://twrp.me/xiaomi/xiaomimix3.html or refer to the forum https://forum.xda-developers.com/mi-mix-3/development/recovery-unofficial-twrp-recovery-t3901261.
b) To install TWRP, I recommend to follow the instructions from Xiaomi.eu. For those not familiar, the "twrp.img" in the code should be the full path of the file. Something like "D:\folder\twrp.img"
c) If you have an older version of TWRP, I suggest to update it to the official.
3. Install Xiaomi.eu - Start from this step in case of bootloops or issues (especially caused by Magisk modules by my experience)
a) This is what I do instead of the 'flash vendor.img from Chinese Dev' prerequisite mentioned in other threads. This is an easier step (just one flash in TWRP) and a better fallback (a working ROM) in case things go wrong. I have had no issues (fingerprint, calls, etc..) with this and I've done this thrice.
b) Download the latest MIUIv10.2 Stable for MIMix3 from the link https://xiaomi.eu/community/threads/miui-10-0-10-1-10-2-stable-release.47170/.
c) Wipe > Format Data (prevents problems, and removes encryption if you had it). Also do Factory Reset (idk, just to be sure).
d) Copy xiaomi.eu ROM to internal storage, then Install > Flash. No need to boot/restart, proceed to the next step.
4. Install GSI ROM - wth is GSI? https://github.com/phhusson/treble_experimentations/wiki/Frequently-asked-questions-(FAQ)
a) We can actually install any GSI in https://forum.xda-developers.com/project-treble/trebleenabled-device-development but there is an issue in installing Google Apps (Open GApps) as many people mentioned in https://forum.xda-developers.com/mi-mix-3/development/9-0-resurrection-remix-v7-0-t3891975 and as confirmed by the official TWRP thread https://forum.xda-developers.com/mi...p-recovery-t3901261/post79035909#post79035909
b) Given the above, the only feasible options are GSI ROMs with built-in GApps and the only 2 I found are PixelExperience GSI and ArrowOS GSI. As GApps is integrated in the system.img, no need to flash Open GApps thus no issues. Having tried both, I personally recommend ArrowOS due to the performance and additional customization options.
c) Download the arm64 AB version (ArrowOS as an example) https://forum.xda-developers.com/pr...abled-device-development/gsi-arrowos-t3835111
d) Copy the resulting system.img to internal storage (extract if its a .zip), in TWRP click Install > Install Images > select system.img of ArrowOS > select System partition. You can now boot, or follow next step to root with Magisk.
5. Install Magisk
a) The Magisk version that passes SafetyNet is the builds from ianmacd https://github.com/ianmacd/MagiskBuilds look for v18.2 (newer versions might work but I haven't tried them yet). You can still use the official Magisk Manager and the ianmacd version will be recognized. Just change the update channel in Magisk to https://goo.gl/yZpnrf. Credits to this thread https://forum.xda-developers.com/mi-mix-3/how-to/root-magisk-18-2-mix-3-t3905754
b) After flashing Magisk, boot, install Magisk Manager, then download and install the module "SafetyPatch". SafetyNet check will now be success.
c) Even though SafetyNet is passed, some banking apps still are not working. Hopefully someone can share a solution (probably MagiskHide Props Config, or canary builds?) to make banking apps work.
Final Thoughts
ArrowOS GSI seems to be stable enough and I'm using it as my daily driver now. I am so much happier compared to when using MIUI Global ROM. I really like the performance (very fluid), battery life (a lot better than MIUI Global), customizations (like traffic indicator, status bar stuff), unli Google Photos, and everything that makes AOSP/stock android awesome. No more bloatware, annoying non-dismissable notifications, and horrible auto brightness from MIUI.
The only real issue I encountered so far is the bluetooth audio/music issue, but this seems to be a common problem in GSI ROMs. Bluetooth calls work though. There is no app to handle the slider (but I don't care. lol). Lastly, the AI button becomes useless, but see below for the fix.
Optional stuff that makes things better:
1. Remapping AI button - When using GSI ROMs, AI button becomes useless. But to map it back to Google Assistant (or anything actually), follow the instructions from this thread (needs some knowledge about Tasker). https://forum.xda-developers.com/showpost.php?p=78523778&postcount=38 For the Tasker Task, I selected Input > Voice Command. This now assigns the button to open Google Assistant. Does not work well when screen is off though, but its just easy to unlock.
2. Google Camera - The main reason why I bought this phone. Google Camera brings out the best in the awesome camera - Use this version https://forum.xda-developers.com/mi-mix-3/themes/gcam-6-manual-focus-long-exposure-t3885610
3. Stereo Speaker Mod - https://forum.xda-developers.com/mi-mix-3/themes/magisk-stereo-speaker-mod-mix-3-t3900580 Makes the phone earpiece into a speaker, increasing overall volume. I personally use version 3 and I'm very happy.
4. Fluid NG - App in Google Play Store to have the same recents/home/back gestures from MIUI 10.
reasonablebasis said:
Disclaimer: I am not a developer (I don't code), but I have been flashing ROMs for many devices over the years. This is more of a practical guide from an end-user perspective in pursuit of finding the best ROM for this magnificent hardware. This is more of a compilation of all the relevant information I found. I'm very open to suggestions/corrections that could improve this
I haven't seen a proper guide to flash GSI ROMs for Mi Mix 3, thus I decided to share what I know that works. I put a brief explanation for each step below.
1. Unlock Bootloader - If you haven't done so yet, I recommend following the instructions in https://www.reddit.com/r/Xiaomi/wiki/bootloader
2. Install TWRP
a) I recommend to use the official TWRP from this link https://twrp.me/xiaomi/xiaomimix3.html or refer to the forum https://forum.xda-developers.com/mi-mix-3/development/recovery-unofficial-twrp-recovery-t3901261.
b) To install TWRP, I recommend to follow the instructions from Xiaomi.eu. For those not familiar, the "twrp.img" in the code should be the full path of the file. Something like "D:\folder\twrp.img"
c) If you have an older version of TWRP, I suggest to update it to the official.
3. Install Xiaomi.eu - Start from this step in case of bootloops or issues (especially caused by Magisk modules by my experience)
a) This is what I do instead of the 'flash vendor.img from Chinese Dev' prerequisite mentioned in other threads. This is an easier step (just one flash in TWRP) and a better fallback (a working ROM) in case things go wrong. I have had no issues (fingerprint, calls, etc..) with this and I've done this thrice.
b) Download the latest MIUIv10.2 Stable for MIMix3 from the link https://xiaomi.eu/community/threads/miui-10-0-10-1-10-2-stable-release.47170/.
c) Wipe > Format Data (prevents problems, and removes encryption if you had it). Also do Factory Reset (idk, just to be sure).
d) Copy xiaomi.eu ROM to internal storage, then Install > Flash. No need to boot/restart, proceed to the next step.
4. Install GSI ROM - wth is GSI? https://github.com/phhusson/treble_experimentations/wiki/Frequently-asked-questions-(FAQ)
a) We can actually install any GSI in https://forum.xda-developers.com/project-treble/trebleenabled-device-development but there is an issue in installing Google Apps (Open GApps) as many people mentioned in https://forum.xda-developers.com/mi-mix-3/development/9-0-resurrection-remix-v7-0-t3891975 and as confirmed by the official TWRP thread https://forum.xda-developers.com/mi...p-recovery-t3901261/post79035909#post79035909
b) Given the above, the only feasible options are GSI ROMs with built-in GApps and the only 2 I found are PixelExperience GSI and ArrowOS GSI. As GApps is integrated in the system.img, no need to flash Open GApps thus no issues. Having tried both, I personally recommend ArrowOS due to the performance and additional customization options.
c) Download the arm64 AB version (ArrowOS as an example) https://forum.xda-developers.com/pr...abled-device-development/gsi-arrowos-t3835111
d) Copy the resulting system.img to internal storage (extract if its a .zip), in TWRP click Install > Install Images > select system.img of ArrowOS > select System partition. You can now boot, or follow next step to root with Magisk.
5. Install Magisk
a) The Magisk version that passes SafetyNet is the builds from ianmacd https://github.com/ianmacd/MagiskBuilds look for v18.2 (newer versions might work but I haven't tried them yet). You can still use the official Magisk Manager and the ianmacd version will be recognized. Just change the update channel in Magisk to https://goo.gl/yZpnrf. Credits to this thread https://forum.xda-developers.com/mi-mix-3/how-to/root-magisk-18-2-mix-3-t3905754
b) After flashing Magisk, boot, install Magisk Manager, then download and install the module "SafetyPatch". SafetyNet check will now be success.
c) Even though SafetyNet is passed, some banking apps still are not working. Hopefully someone can share a solution (probably MagiskHide Props Config, or canary builds?) to make banking apps work.
Final Thoughts
ArrowOS GSI seems to be stable enough and I'm using it as my daily driver now. I am so much happier compared to when using MIUI Global ROM. I really like the performance (very fluid), battery life (a lot better than MIUI Global), customizations (like traffic indicator, status bar stuff), unli Google Photos, and everything that makes AOSP/stock android awesome. No more bloatware, annoying non-dismissable notifications, and horrible auto brightness from MIUI.
The only real issue I encountered so far is the bluetooth audio/music issue, but this seems to be a common problem in GSI ROMs. Bluetooth calls work though. There is no app to handle the slider (but I don't care. lol). Lastly, the AI button becomes useless, but see below for the fix.
Optional stuff that makes things better:
1. Remapping AI button - When using GSI ROMs, AI button becomes useless. But to map it back to Google Assistant (or anything actually), follow the instructions from this thread (needs some knowledge about Tasker). https://forum.xda-developers.com/showpost.php?p=78523778&postcount=38 For the Tasker Task, I selected Input > Voice Command. This now assigns the button to open Google Assistant. Does not work well when screen is off though, but its just easy to unlock.
2. Google Camera - The main reason why I bought this phone. Google Camera brings out the best in the awesome camera - Use this version https://forum.xda-developers.com/mi-mix-3/themes/gcam-6-manual-focus-long-exposure-t3885610
3. Stereo Speaker Mod - https://forum.xda-developers.com/mi-mix-3/themes/magisk-stereo-speaker-mod-mix-3-t3900580 Makes the phone earpiece into a speaker, increasing overall volume. I personally use version 3 and I'm very happy.
Click to expand...
Click to collapse
Not all GSI work ontop of Xiaomi Eu
Flashing magisk and safety net patch also doesn't guarantee safety net passing on a few of the GSI as well. CTS will fail for obvious reasons
Mackay53 said:
Not all GSI work ontop of Xiaomi Eu
Flashing magisk and safety net patch also doesn't guarantee safety net passing on a few of the GSI as well.
Click to expand...
Click to collapse
Noted. Which GSI have you tried that do not work on top of Xiaomi.EU? I tried RR, PixelExperience, and ArrowOS and all work well. I can put this as a disclaimer.
Any solution for the Magisk safetynet, or is this really the best solution available so far?
reasonablebasis said:
Noted. Which GSI have you tried that do not work on top of Xiaomi.EU? I tried RR, PixelExperience, and ArrowOS and all work well. I can put this as a disclaimer.
Any solution for the Magisk safetynet, or is this really the best solution available so far?
Click to expand...
Click to collapse
Can't remember as it was a while ago, possibly OctoOS and descendant and 1 other, omni ROM maybe.
For the ones that come with SU you need to navigate to the xbin folder in the system and remove the SU file.
Then cause Xiaomi EU uses the wrong fingerprint props you need to use the magisk props config module and manually type in the mix 3 fingerprint (unless the module has been updated to include mix 3).
If you installed the Chinese dev vendor then the props will be there ready to be used so the magisk module can make them active without manually typing it. This will sort out both safety net fails.
If this was sometime ago, the features in China Dev would have already been integrated in the latest China Stable, which is the basis of Xiaomi.EU.
Maybe you can test it now to see if Xiaomi.EU really works. I tried it with RR, PixelExperience, and ArrowOS and I'm facing no issues. So flashing China Dev vendor.img seems to be an outdated instruction.
reasonablebasis said:
Noted. Which GSI have you tried that do not work on top of Xiaomi.EU? I tried RR, PixelExperience, and ArrowOS and all work well. I can put this as a disclaimer.
Any solution for the Magisk safetynet, or is this really the best solution available so far?
Click to expand...
Click to collapse
Pixel dust gsi too....
reasonablebasis said:
If this was sometime ago, the features in China Dev would have already been integrated in the latest China Stable, which is the basis of Xiaomi.EU.
Maybe you can test it now to see if Xiaomi.EU really works. I tried it with RR, PixelExperience, and ArrowOS and I'm facing no issues. So flashing China Dev vendor.img seems to be an outdated instruction.
Click to expand...
Click to collapse
The 3 GSI you mention is a very small sample of the GSI available so you can't say it's an outdated instruction. Have you tested them all like I have? No you haven't.
Xiaomi EU does not use the correct mix3 vendor.img, that's what causes the issue.
Mackay53 said:
The 3 GSI you mention is a very small sample of the GSI available so you can't say it's an outdated instruction. Have you tested them all like I have? No you haven't.
Xiaomi EU does not use the correct mix3 vendor.img, that's what causes the issue.
Click to expand...
Click to collapse
Ok, I'll put a disclaimer that this only works on RR, PixelExperience, and ArrowOS. Anyway, I'm sure that the latest stable Xiaomi.EU vendor works without any issues with ArrowOS, else why would I be using it as my daily driver.
[deleted, duplicate post]
Someone know if there is a GSI with gapps and that don't have issue with bluetooth?
SafetyPatch module
reasonablebasis said:
5. Install Magisk
a) The Magisk version that passes SafetyNet is the builds from ianmacd https://github.com/ianmacd/MagiskBuilds look for v18.2 (newer versions might work but I haven't tried them yet). You can still use the official Magisk Manager and the ianmacd version will be recognized. Just change the update channel in Magisk to https://goo.gl/yZpnrf. Credits to this thread https://forum.xda-developers.com/mi-...mix-3-t3905754
b) After flashing Magisk, boot, install Magisk Manager, then download and install the module "SafetyPatch". SafetyNet check will now be success.
c) Even though SafetyNet is passed, some banking apps still are not working. Hopefully someone can share a solution (probably MagiskHide Props Config, or canary builds?) to make banking apps work.
Click to expand...
Click to collapse
Mate, I can't find this module via Magisk Manager... Please help!
jonny908 said:
Mate, I can't find this module via Magisk Manager... Please help!
Click to expand...
Click to collapse
You sure? Try searching for "SafetyPatch"
reasonablebasis said:
You sure? Try searching for "SafetyPatch"
Click to expand...
Click to collapse
Strange....
reasonablebasis said:
You sure? Try searching for "SafetyPatch"
Click to expand...
Click to collapse
Issue resolved. I had to use Magisk Manager 7.x.x, I was trying using 6.0.
Installed, MagiskHide working as it should now.
---------- Post added at 18:23 ---------- Previous post was at 18:15 ----------
@reasonablebasis
Sorry for third post in a row., but.... I have no issues with bluetooth audio/music that everyone is talking about. Listening to Spotify on my QCY bluetooth earphones now.....
jonny908 said:
Issue resolved. I had to use Magisk Manager 7.x.x, I was trying using 6.0.
Installed, MagiskHide working as it should now.
---------- Post added at 18:23 ---------- Previous post was at 18:15 ----------
@reasonablebasis
Sorry for third post in a row., but.... I have no issues with bluetooth audio/music that everyone is talking about. Listening to Spotify on my QCY bluetooth earphones now.....
Click to expand...
Click to collapse
On Arrow ?
Wahoux said:
On Arrow ?
Click to expand...
Click to collapse
Yep! Not sure how to prove that though xD
Android Q GSI !
https://www.xda-developers.com/android-q-gsi-project-treble/
Wahoux said:
Android Q GSI !
https://www.xda-developers.com/android-q-gsi-project-treble/
Click to expand...
Click to collapse
Dare to try? xD
jonny908 said:
Dare to try? xD
Click to expand...
Click to collapse
ahah no xD
Right now i'm about to flash Arrow, I hope I won't have bluetooth issue . On the non-GSI Pixel Experience, some reported issue with bluetooth whereas it was working fine for me... so let's see :fingers-crossed:
jonny908 said:
Mate, I can't find this module via Magisk Manager... Please help!
Click to expand...
Click to collapse
jonny908 said:
Issue resolved. I had to use Magisk Manager 7.x.x, I was trying using 6.0.
Installed, MagiskHide working as it should now.
---------- Post added at 18:23 ---------- Previous post was at 18:15 ----------
@reasonablebasis
Sorry for third post in a row., but.... I have no issues with bluetooth audio/music that everyone is talking about. Listening to Spotify on my QCY bluetooth earphones now.....
Click to expand...
Click to collapse
Wow good for you. You flashed xiaomi.eu prior to GSI right? enumerate the steps you did, so that we we hopefully can replicate your success. Hehe
V4A Fx installation (Rooted with magisk required)
Download following modules:
https://drive.google.com/folderview?id=10Q_4QsFAe8cW63GH3VrM0jtuIOAPP8t1
1.Install magisk_selinux_manager_v1.0.zip magisk module in magisk manager and set selinux to permissive.
2.install ViPER4Android_FX-v2.7.1.0(2710).zip magisk module in magisk manager.(requires internet)
3.Reboot and open V4A it will ask for driver installation .Allow it
4.After installation of driver it will automatically reboot .
5.Enjoy V4A
Credits to @santoshhh000
If you like this post press thanks
No
Did you install from magisk? Not twrp. Follow the instructions as mentioned above
ariber14 said:
Did you install from magisk? Not twrp. Follow the instructions as mentioned above
Click to expand...
Click to collapse
Yes, from magisk.
I will try again when reinstall miui eu.
omerhodzic1 said:
Yes, from magisk.
I will try again when reinstall miui eu.
Click to expand...
Click to collapse
Hey, miui eu is working?
---------- Post added at 11:10 PM ---------- Previous post was at 11:08 PM ----------
[/COLOR]
Linkonlk said:
Hey, miui eu is working?
Click to expand...
Click to collapse
Found it on the telegram group.
Redmi Note 8 Pro | OFFICIAL
Redmi Note 8 Pro - Official Telegram Group
t.me/RedmiNote8ProOfficial
ariber14 said:
V4A Fx installation (Rooted with magisk required)
Download following modules:
https://drive.google.com/folderview?id=10Q_4QsFAe8cW63GH3VrM0jtuIOAPP8t1
1.Install magisk_selinux_manager_v1.0.zip magisk module in magisk manager and set selinux to permissive.
2.install ViPER4Android_FX-v2.7.1.0(2710).zip magisk module in magisk manager.(requires internet)
3.Reboot and open V4A it will ask for driver installation .Allow it
4.After installation of driver it will automatically reboot .
5.Enjoy V4A
Credits to @santoshhh000
If you like this post press thanks
Click to expand...
Click to collapse
Which miui you install?
omerhodzic1 said:
Which miui you install?
Click to expand...
Click to collapse
On miui 11.0.2.0 eu
ariber14 said:
On miui 11.0.2.0 eu
Click to expand...
Click to collapse
I tried multiple times, miui eu 11.0.2.0, with a clean install at the end, without an account and any backup, different versions of magisk, ect. 1 or 2 sim card.
With one, one sim card work, when I installed the Viper with 2 sim, stop working both.
Maybe I'll be lucky with some new version. The Viper is my favorite.
Search for a zip called clean+soundmod.zip.it will remove any audio mod that might create conflict.flash it ftom twrp then repeat the procedure again as mentioned
ariber14 said:
Search for a zip called clean+soundmod.zip.it will remove any audio mod that might create conflict.flash it ftom twrp then repeat the procedure again as mentioned
Click to expand...
Click to collapse
Can you post it here. I could not find it.
Here it is. Flash it from twrp then restart
ariber14 said:
Here it is. Flash it from twrp then restart
Click to expand...
Click to collapse
Thank you!!
Your phone is using xiaomi.eu rom, but Is it China version or Global version?
I have China one with same xiaomi.eu rom, but cant seem to make viper work
MarkLev said:
Thank you!!
Your phone is using xiaomi.eu rom, but Is it China version or Global version?
I have China one with same xiaomi.eu rom, but cant seem to make viper work
Click to expand...
Click to collapse
M1906G7G - Global 64mb - not working for now.
omerhodzic1 said:
M1906G7G - Global 64mb - not working for now.
Click to expand...
Click to collapse
Problem with magisk_selinux_manager_v1.0.zip
If use 2 SIM they stop working.
Viper working with setenforce 0 in terminal.
Found this on telegram group:
t.me/RedmiNote8ProOfficial
I have noticed . Selinux manager module when flashed through latest magisk .It Doesn't work ,so if possible flash it through older version magisk 20.0 or earlier version .After that you can update your magisk to latest.
santoshhh000 said:
I have noticed . Selinux manager module when flashed through latest magisk .It Doesn't work ,so if possible flash it through older version magisk 20.0 or earlier version .After that you can update your magisk to latest.
Click to expand...
Click to collapse
I tried with magisk 19 and the problem is the same.
I also have a problem with SIM cards, when install magisk_selinux_manager_v1.0.zip with permissive, only when I take out one SIM card GSM works, when two are not working, no registered cards in mob, if install with enforceing is ok, that's weird. It is no problem for me to use the terminal, it is also safer for the system, it may be safer not to be in permissive mode all the time.
Thank you for your help.
And most importantly, I have ViPER4A!
All the best,
omerhodzic1 said:
I tried with magisk 19 and the problem is the same.
I also have a problem with SIM cards, when install magisk_selinux_manager_v1.0.zip with permissive, only when I take out one SIM card GSM works, when two are not working, no registered cards in mob, if install with enforceing is ok, that's weird. It is no problem for me to use the terminal, it is also safer for the system, it may be safer not to be in permissive mode all the time.
Thank you for your help.
And most importantly, I have ViPER4A!
All the best,
Click to expand...
Click to collapse
1. Install SELinux Mode Changer app from here
2. Install lates viper4android app
3. Start SELinux Mode Changer and set to "permissive" then start viper4android and Enjoy!
you can set autostart for SELinux Mode Changer
MarkLev said:
1. Install SELinux Mode Changer app from here
2. Install lates viper4android app
3. Start SELinux Mode Changer and set to "permissive" then start viper4android and Enjoy!
you can set autostart for SELinux Mode Changer
Click to expand...
Click to collapse
That's it.
Thnx
I totally forgot Tasker.
UNIVERSAL SafetyNet FIX
(A515x Edition)
ABOUT THIS:This is a universal fix for SafetyNet on devices with hardware attestation and unlocked bootloaders. It defeats both hardware attestation and the new SafetyNet CTS profile updates released on January 12, 2021. The only requirement is that you can pass basic attestation, which requires a valid combination of device and model names, build fingerprints, and security patch levels.
Passing basic attestation is mostly out-of-scope for this module; this module is meant to defy hardware attestation, as well as reported "basic" attestation that actually uses hardware under-the-hood. Nonetheless, it features a few basic attempts at helping pass basic attestation on some devices, especially older devices and devices running stock ROMs.
HOW DO I USE IT?
Code:
1. Simply install the module by Magisk, reboot
2. Enable Magisk Hide and enjoy
**ITS ONLY for A51 OneUI 2.5 or 3.0
CREDITS TO:
@kdrag0n (Original developer of this mod)
@spit85 (For his important information and experience applying it to other devices )
SafetyNET Patch A51
Its based on the stock keystore so it doesnt affect anything
is it working One UI 2.1 refined v1.0 ?
Fatih27 said:
is it working One UI 2.1 refined v1.0 ?
Click to expand...
Click to collapse
It should be the same keystore. You can test it. If your phone doesn't boot, boot to recovery and delete the module there.
Hi, I do the steps but it keeps saying that the certification failed :/
EDIT: Solved
My sefty net passes but after that i can't access mobile setting
It says the settings has stopped
ameer419 said:
My sefty net passes but after that i can't access mobile setting
It says the settings has stopped
Click to expand...
Click to collapse
You are using a Samsung galaxy a51? Android 10 or 11?
spit85 said:
You are using a Samsung galaxy a51? Android 10 or 11?
Click to expand...
Click to collapse
Android 10
ameer419 said:
Android 10
Click to expand...
Click to collapse
That's strange. It should work on android 10. I hex patched that keystore by my self. Maybe you got another magisk module that conflicts with these one. Do you have magisk props hide module? If yes, delete that module. You don't need it with these safetynet patch. And these patch is only for stock rom or stock base roms
spit85 said:
That's strange. It should work on android 10. I hex patched that keystore by my self. Maybe you got another magisk module that conflicts with these one. Do you have magisk props hide module? If yes, delete that module. You don't need it with these safetynet patch. And these patch is only for stock rom or stock base roms
Click to expand...
Click to collapse
Yes at that time i have that module but after this problem...i unroot my device
ameer419 said:
Yes at that time i have that module but after this problem...i unroot my device
Click to expand...
Click to collapse
Then root your phone again and only instal this module. I should work. Or flash the boot image again with Odin and root it over twrp recovery
spit85 said:
Then root your phone again and only instal this module. I should work. Or flash the boot image again with Odin and root it over twrp recovery
Click to expand...
Click to collapse
Yeah i m going to root it tomorrow
Just after rooting....do i have to install thia module
Would u like to suggest me to install any other module to pass safety net
ameer419 said:
My sefty net passes but after that i can't access mobile setting
It says the settings has stopped
Click to expand...
Click to collapse
Hi, If u are in RefinedUI 2.0 its a bug but I have already fixed it, check the small updates section of the Refined thread
BlassGO said:
Hi, If u are in RefinedUI 2.0 its a bug but I have already fixed it, check the small updates section of the Refined thread
Click to expand...
Click to collapse
I m on ui2.5
ameer419 said:
I m on ui2.5
Click to expand...
Click to collapse
With RefinedUI?
BlassGO said:
With RefinedUI?
Click to expand...
Click to collapse
Bro I have not so much knowledge about thi....i don't know it's refined or not....how to check
ameer419 said:
Bro I have not so much knowledge about thi....i don't know it's refined or not....how to check
Click to expand...
Click to collapse
I guess you are on stock rom and only unlock the bootloader and rooted the phone. If you have the Samsung galaxy a51, this patch work. If you have another phone model, it's possible that's the reason your phone trips in settings
spit85 said:
I guess you are on stock rom and only unlock the bootloader and rooted the phone. If you have the Samsung galaxy a51, this patch work. If you have another phone model, it's possible that's the reason your phone trips in settings
Click to expand...
Click to collapse
Yes... i have stock rom unlocked bootloader
I will try thi today after rooting because i unroot my phone due to settings has stopped issue
Updater process ended with ERROR 1
Error installing zip file "/external_sd/SafetyNet_Patch_A515_a10-11.zip
or
Updater process ended with ERROR 123
Error installing zip file "/external_sd/SafetyNet_Patch_A515_a10-11.zip
mikola08 said:
It doesn't want to install on android 11
Click to expand...
Click to collapse
Magisk crashes when tapping from "install from storage"
Using
[ROM][A515x] RefinedUI v2.0 [OneUI3.0 - Android11]
[ROM][A515x] RefinedUI v2.0 [OneUI3.0 - Android11]
FEATURES [ 2.0 - REMAKE ] - NDataX replaced with BlueFly (An improved version) - Mixplorer removed (Problems with Google File Manager) - Added the option to remove the Magisk App from the /system (Abnormal State) - The OMC was updated with the...
forum.xda-developers.com
A short splash screen shows up with an blue folder icon.
Any idea how to fix that?
I have this message, but since the phone is rooted I'm very scared if I should install this download, I don't even know what it is, so didn't open this message.
Unfortunately it can't be removed, so what now?
Could you check this notification form which application comes?
Abdullah.Csit said:
Could you check this notification form which application comes?
Click to expand...
Click to collapse
I went to settings, system, system updates.
There it states my phone is rooted and that updating will unroot. I'm a bit scared that they push the new Android 12 to me, with all problems this will probably mean they will kill my phone...
The update is 3061 MB (for the EU-version 9 pro)
Oh, it sais:
Optimized the third-party app experience
Updated Android security patch to 2021.11
Improved System stability and fixed known issues
So no android 12 I think, but still... How to install this and then root once again? I mean, should I boot with a temporary twrp or batched boot and then reapply the patch from magisk, or does this also uninstall magisk?
Bright.Light said:
Oh, it sais:
Optimized the third-party app experience
Updated Android security patch to 2021.11
Improved System stability and fixed known issues
So no android 12 I think, but still... How to install this and then root once again? I mean, should I boot with a temporary twrp or batched boot and then reapply the patch from magisk, or does this also uninstall magisk?
Click to expand...
Click to collapse
Updating your device will not let you losing root, Just in a12 case you had to use canary build but there is no magisk hide.
Read this - sticky post btw
And you will find how to update without losing root
[GUIDE] [Magisk] [Unlock / ROOT / Keep Root] OOS 13.1.0.500
Different variants of Magisk that are available for use : Magisk Variant Stable / Beta / Canary Release Official Android / OOS OOS 11 and above Maintainer topjohnwu Project Link GitHub Zygisk No...
forum.xda-developers.com