A modified xposed installer and framework for nougat is now available thanks to the Purify os team and rovo
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
Follow the link above.
1. Make backups, twrp/titanium
2. Install the modified xposed installer first, must be done first!
https://forum.xda-developers.com/devdb/project/?id=13191#downloads
Use the top one on the list it may get updated
3. Next download the modified xposed framework from Purify here
http://fastkit.org/xposed/
Follow the links.... SDK24 for nougat 7.0..... Then download the xposed version 87 model... Flash from twrp
Again make sure you fully back up, it all went fine for me, but sometimes these things don't go right.
Plenty of posts in the linked forum but a bit of a jumble as usual, all with varied results, but the above will work for us.
Not sure how many modules are usable yet, I have one working so I know it does work.
Which are you using, and what would you like to use?
undrwater said:
Which are you using, and what would you like to use?
Click to expand...
Click to collapse
Status bar sleep.. Working
Status bar download progress.... Working (mostly)
Status bar cpu temp.. Not working
Status bar cpu frequency.. Not working
Any of the status bar theming such as wanams xtouchwiz would be good
Also xinternalsd was useful but not working
Can you change aspect ratio yet?
blaze82 said:
Can you change aspect ratio yet?
Click to expand...
Click to collapse
Not something I would normally do, is there a particular module you use for that?
It's been such a long time since I came across this, being able to adjust screen ratio and dpi on a per app basis. No real reason to now but with the 4:3 ratio on this tab, it'll be nice.
Also, been a while since I've used xbosed
does not work for me.. i get a recovery-boot loop and it does not start the system
Ch3ck3rM0n said:
does not work for me.. i get a recovery-boot loop and it does not start the system
Click to expand...
Click to collapse
I have been using it without problem for a while, but the versions used are crucial to success, I couldn't get the magisk systemless to work. Try going back to the beginning and make sure each download is correct, the method in the first post will work.
hmm.. but i need magisk :-/
Ch3ck3rM0n said:
hmm.. but i need magisk :-/
Click to expand...
Click to collapse
Ok, it may be possible for it to work, I didn't persist with it, what is the benefit with magisk for you?
rorymc928 said:
Ok, it may be possible for it to work, I didn't persist with it, what is the benefit with magisk for you?
Click to expand...
Click to collapse
Get it work with super su but installed OBBonSD does not work (with GTA, KotoR,...). Do you have any idea?
EDIT: Found a solution with http://repo.xposed.info/module/com.pyler.xinternalsd
I have followed the directions exactly and I tried twice to install xposed on my t825 rooted with magisk 14. No luck unfortunately. Has anybody been successful in installing it ??
If yes, could he share the methodology ?
xpil said:
... with magisk 14
Click to expand...
Click to collapse
had the same problem.. remove magisk and install superSU.. xposed do not work with magisk -.-' on this tablet..
Question, how do I remove xposed again?
Can I do it with the installer app, or do I need a special skript? Never used Xposed on Samsung before and I know everything works differently.
Hello,
Your experience : Do you have a "" Tab S3 SM-T825, Nougat 7.0, Root SuperSU "" on which you have installed Xposed.
1- Does Xposed work normally with different modules?
(No Bootloop or tablet block?)
2 - Which version xposed * .zip ?
3 - Which Version XposedInstaller _ *. Apk ?
Thank you
Cordially
Yam_y
Yam_y said:
Hello,
Your experience : Do you have a "" Tab S3 SM-T825, Nougat 7.0, Root SuperSU "" on which you have installed Xposed.
1- Does Xposed work normally with different modules?
(No Bootloop or tablet block?)
2 - Which version xposed * .zip ?
3 - Which Version XposedInstaller _ *. Apk ?
Thank you
Cordially
Yam_y
Click to expand...
Click to collapse
Fairly old thread this, I have a T820, however I've made roms for both variants, the t825 thread is here,
https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t825-tweaked-t3769742
the earlier versions are nougat the latest 3.0 on are oreo both work fine, you'll find instructions in the thread, if changing to oreo you need to flash the oreo bootloader, through odin, if returning to nougat you need to flash the older nougat bootloader as they're not cross compatible.
Xposed works fine on both, xposed installer included after booting, start the xposed installer app and select install it picks the correct version.
Root is by magisk.
rorymc928 said:
Fairly old thread this, I have a T820, however I've made roms for both variants, the t825 thread is here,
https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t825-tweaked-t3769742
the earlier versions are nougat the latest 3.0 on are oreo both work fine, you'll find instructions in the thread, if changing to oreo you need to flash the oreo bootloader, through odin, if returning to nougat you need to flash the older nougat bootloader as they're not cross compatible.
Xposed works fine on both, xposed installer included after booting, start the xposed installer app and select install it picks the correct version.
Root is by magisk.
Click to expand...
Click to collapse
Hello Rorymc
Thanks for the answer and for the link SM-T825 TWEAKED, but I'm already Root with SuperSU + Dm-Verity with Rom ARA2 Nougat 7.0 and I just have to flash Xposed with TWRP.
So, I think I have to take Xposed.zip and Xposedinstaller APK from rovo89 in pure version without add and unmodified ?
I hope I'm not mistaken .....
Cordially
Yam
Yam_y said:
Hello Rorymc
Thanks for the answer and for the link SM-T825 TWEAKED, but I'm already Root with SuperSU + Dm-Verity with Rom ARA2 Nougat 7.0 and I just have to flash Xposed with TWRP.
So, I think I have to take Xposed.zip and Xposedinstaller APK from rovo89 in pure version without add and unmodified ?
I hope I'm not mistaken .....
Cordially
Yam
Click to expand...
Click to collapse
Yes that's correct, just make sure you get the correct versions, if anything goes wrong just restore your backup.
rorymc928 said:
Yes that's correct, just make sure you get the correct versions, if anything goes wrong just restore your backup.
Click to expand...
Click to collapse
Hello,
Thank you. Well understood. I like your precise answers
Cordially
Yam
Related
hey guys,
Was just browsing through the threads and i came across this one..
http://forum.xda-developers.com/xposed/modules/tool-installer-xposed-installer-zenfones-t2983589
This guy has developed Xposed framework especially for Zenfone's and Intel X86 devices...Since we have a Intel based device... Can we use this on our zenfone 2?
give a try and revert
ilos said:
give a try and revert
Click to expand...
Click to collapse
I will but what if i get a bootloop or my device gets bricked?? How should i recover from it? By flashing via adb??
Doesent work. Last updated 2014.
i've tried => not working and as per Rovo, xposed for lollipop is only for arm7 for the moment..
Damn... That sucks eggs big time...
Hopefully as more devices come out with the 64bit cores this might change, wouldn't hurt if the devs also got these devices, TWRP would also be nice...
fyi, there's a patched version released yesterday on taiwanese forum. so i guess it will soon be here on xda.
The Zenfone 2 is on 32bits version of Lolipop so an updated version of Xposed for X86 should work
earthmon said:
fyi, there's a patched version released yesterday on taiwanese forum. so i guess it will soon be here on xda.
Click to expand...
Click to collapse
any link to give a look ?
http://www.asus.com/zentalk/tw/forum.php?mod=viewthread&tid=80297
ilos said:
any link to give a look ?
Click to expand...
Click to collapse
chinese only, unfortunately
http://www.asus.com/zentalk/tw/forum.php?mod=viewthread&tid=80297&extra=page=1
lol ok i've found the same mega link on a turkish blog
For me it's working great
@shakalaca @sorg if you read this : that's working ! for now i've 2 modules OK and i will give a try to some over
Thank you !
http://www.asus-zenfone.com/2015/05/zenfone-2-install-android-50-xposed-framework.html?m=1
ilos said:
lol ok i've found the same mega link on a turkish blog
For me it's working great
@shakalaca @sorg if you read this : that's working ! for now i've 2 modules OK and i will give a try to some over
Thank you !
Click to expand...
Click to collapse
Can u just give me a lil tutorial how u installed Xposed framework... I installed it on my phone but when i open Xposed it says " installation only possible via recovery" so how did u achieve that...
mhp1995 said:
Can u just give me a lil tutorial how u installed Xposed framework... I installed it on my phone but when i open Xposed it says " installation only possible via recovery" so how did u achieve that...
Click to expand...
Click to collapse
if you see current : 61 and 64 in green , xposed is installed
ilos said:
if you see current : 61 and 64 in green , xposed is installed
Click to expand...
Click to collapse
nope i dont see any... I installed a module and activated it...but its says Xposed not currently active...Screenshots attached
working on my ZE551ML
just follow this guideline http://www.asus-zenfone.com/2015/05/zenfone-2-install-android-50-xposed-framework.html?m=1
1 - connect zenfone with USB ( debug on)
2 - launch InstallXposedFramework.bat (phone will reboot)
wait framework installation is finished (a bit longer coz xposed wipe ART cache)
3 - Launch InstallXposedInstaller.bat to install xposed apk.
In your case step 3 is useless coz you have already installed the apk (be sure it's the latest apk..Alpha2).
credits to @shakalaca @sorg and @rovo89
ilos said:
just follow this guideline http://www.asus-zenfone.com/2015/05/zenfone-2-install-android-50-xposed-framework.html?m=1
1 - connect zenfone with USB ( debug on)
2 - launch InstallXposedFramework.bat (phone will reboot)
after framework installation is finished (a bit longer coz xposed wipe ART cache)
3 - Launch InstallXposedInstaller.bat to install xposed apk.
In your case step 3 is useless coz you have already install the apk (be sure this is the latest apk..Alpha2).
credits to @shakalaca @sorg and @rovo89
Click to expand...
Click to collapse
Thanks its working now :good:
Good. Now i don't need to release pre-patched public system.img
I didn't look into installer, but you need to be careful when you use Xposed modules. Since we don't have custom recovery, it's not easy to recover from bootloop if some module will prevent system loading.
Keep spare system.img without Xposed, so you can flash it in case if you can't boot. Although, i'm not sure if it will be able to boot after Xposed modifications in cache.
Many Many Many thanks for your work Sorg !!!
my idea was, if getting in bootloop, to put phone in fastboot mode and reflash system.img preroot by Shakalaca (if i remember, after flashed system.img , ART cache is wiped)
i've tested Install and remove scripts installer and all worked ok
I've my phone since 1 week and it's already rooted and xposed compatible. Wonderful life
Edit : bootloop with Xprivacy (bootloop solved by fastboot flash preroot system.img)
Hello,
I have version D85130e installed on my phone and am rooted on the stock ROM. I received a System update notice this morning so i thought there was a new software version for the phone, but when I check on the T-mobile site for the LG G3, it says that D85130e is the latest version. (Cant post links because I am a new user).
I am confused, has anyone else received this update? I couldn't find anything about it. It is 133.0MB in size and says that it 'includes Android Security updates among other changes'.
I don't want to install it in case in breaks my root or worse. Does anyone here have any information about this?
Thank you!
received the update too
seleucid said:
Hello,
I have version D85130e installed on my phone and am rooted on the stock ROM. I received a System update notice this morning so i thought there was a new software version for the phone, but when I check on the T-mobile site for the LG G3, it says that D85130e is the latest version. (Cant post links because I am a new user).
I am confused, has anyone else received this update? I couldn't find anything about it. It is 133.0MB in size and says that it 'includes Android Security updates among other changes'.
I don't want to install it in case in breaks my root or worse. Does anyone here have any information about this?
Thank you!
Click to expand...
Click to collapse
tho i was disappointed it wasn't a 7.0 update, but i'm installing it right now and i would love to know: what's new?
Its a April security update. I will make a flashable zip with it. If anyone wants to try it pm me and I will share the link when its uploaded.
Link to try it: https://forum.xda-developers.com/showpost.php?p=72931940&postcount=98 Flash MagiskSU after flashing the zip.
from what I read yesterday, it's the D85130G update. https://goo.gl/ktuJMP
I don't want to chance unrooting my phone with this update. I'll wait till there is a rooted version to flash
jdmst77 said:
from what I read yesterday, it's the D85130G update.
I don't want to chance unrooting my phone with this update. I'll wait till there is a rooted version to flash
Click to expand...
Click to collapse
You can flash the update from the zip above and then flash magisk. That worked for me, I have v30G and root access. Thanks to MESA for suggesting it.
edit: MESA already said this above.
Stable update by MESA. No need to think about losing root access as MAGISK does the trick perfectly.
Everything is stable so far after 2 days of usage. I'll continue to give updates as and when I detect something unusual.
@eadumensah: is your safetynet working with MAGISK?
MESA said:
Its a April security update. I will make a flashable zip with it. If anyone wants to try it pm me and I will share the link when its uploaded.
Link to try it: https://forum.xda-developers.com/showpost.php?p=72931940&postcount=98 Flash MagiskSU after flashing the zip.
Click to expand...
Click to collapse
Thanks for keeping this old phone alive, it's running much better after the update. I just flashed it right over everything.
bluehacker007 said:
@eadumensah: is your safetynet working with MAGISK?
Click to expand...
Click to collapse
Not anymore. It worked on V12 but stopped after I upgraded to v13. Let me know in case you get a solution to that.
bluehacker007 said:
@eadumensah: is your safetynet working with MAGISK?
Click to expand...
Click to collapse
Ignore my earlier update. It does now after upgrading to v13.2
eadumensah said:
Ignore my earlier update. It does now after upgrading to v13.2
Click to expand...
Click to collapse
After a lot of testing it seems to me that safetynet works fine until I install xposed. Furthermore, installing systemless xposed from the magisk repository results in failure to boot. If I install systemless xposed from the xposed materialdesign app I am able to boot and use xposed modules but my safetynet check fails. I'm using magisk v13.2, magisk manager v5.0.6, material xposed installer v3.0.1 and systemless xposed v87.0 sdk 23 by topjohnwu.
Edited to add versions.
bluehacker007 said:
After a lot of testing it seems to me that safetynet works fine until I install xposed. Furthermore, installing systemless xposed from the magisk repository results in failure to boot. If I install systemless xposed from the xposed materialdesign app I am able to boot and use xposed modules but my safetynet check fails. I'm using magisk v13.2, magisk manager v5.0.6, material xposed installer v3.0.1 and systemless xposed v87.0 sdk 23 by topjohnwu.
Edited to add versions.
Click to expand...
Click to collapse
I got rid of xposed and deleted the play store data. Got into the magisk hide option and checked the following
1. Google play store
2. Google services framework
This is to hide it from detection by google. You can try it without deleting xposed first and let's see the outcome.
eadumensah said:
I got rid of xposed and deleted the play store data. Got into the magisk hide option and checked the following
1. Google play store
2. Google services framework
This is to hide it from detection by google. You can try it without deleting xposed first and let's see the outcome.
Click to expand...
Click to collapse
Tried that but it did not work. If I enable magisk core only mode (which disables systemless xposed) then I can pass security check. The only other magisk module I have is unified hosts adblock and I very much doubt that that is causing the safetynet failure.
Interesting side note: I've deleted apps from /system/apps and /system/priv-app from TWRP and I've changed the DPI using texdroider and these changes don't seem to trip safetynet.
lg g3 d851 30e MM not rooted
please help
i have an lg g3 d851 30e MM not rooted
i want to root(magisk systemless root) my lg g3 instal twrp and get the firmware v30G !!!!
what should i do
---------- Post added at 11:20 PM ---------- Previous post was at 10:43 PM ----------
MESA said:
Its a April security update. I will make a flashable zip with it. If anyone wants to try it pm me and I will share the link when its uploaded.
Link to try it: https://forum.xda-developers.com/showpost.php?p=72931940&postcount=98 Flash MagiskSU after flashing the zip.
Click to expand...
Click to collapse
lg g3 d851 30e MM not rooted
please help
i have an lg g3 d851 30e MM not rooted
i want to root(magisk systemless root) my lg g3 instal twrp and get the firmware v30G !!!!
what should i do
bluehacker007 said:
After a lot of testing it seems to me that safetynet works fine until I install xposed. Furthermore, installing systemless xposed from the magisk repository results in failure to boot. If I install systemless xposed from the xposed materialdesign app I am able to boot and use xposed modules but my safetynet check fails. I'm using magisk v13.2, magisk manager v5.0.6, material xposed installer v3.0.1 and systemless xposed v87.0 sdk 23 by topjohnwu.
Edited to add versions.
Click to expand...
Click to collapse
so you were able to get xposed to install and work correctly on 30G? Please confirm
whenever I tried, I could never boot up the device. If failing safetynet means that i can have xposed on 30G, I'm ready to upgrade from 30E
jdmst77 said:
so you were able to get xposed to install and work correctly on 30G? Please confirm
whenever I tried, I could never boot up the device. If failing safetynet means that i can have xposed on 30G, I'm ready to upgrade from 30E
Click to expand...
Click to collapse
I did get xposed to work but don't download and install the framework from the magisk app - use the xposed material design app to download and install the framework. I'm not sure why the magisk supplied framework doesn't work - it caused me to get stuck at boot as well.
bluehacker007 said:
I did get xposed to work but don't download and install the framework from the magisk app - use the xposed material design app to download and install the framework. I'm not sure why the magisk supplied framework doesn't work - it caused me to get stuck at boot as well.
Click to expand...
Click to collapse
I've been waiting for this info to upgrade. Thanks for all the details, including version, etc
Hi z5 premium users, there is a guide for installing xposed on nougat 7.1 .1
There are some z5 users who used this method and it's working for them.
Any one tested this on z5 premium ?
Working or not?
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
mahyjooon said:
Hi z5 premium users, there is a guide for installing xposed on nougat 7.1 .1
There are some z5 users who used this method and it's working for them.
Any one tested this on z5 premium ?
Working or not?
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
Click to expand...
Click to collapse
I Have Z5p E6853 and Android N 7.1.1 32.4.A.0.160 stock rooted kernel and Xposed(SDK25 ARM64 ) does work on my device and a lot of modules work great and even Amplify works great, but only after i moved it to system partition and changed permissions to 777, not all modules work though (Greenify doesn't work) - but i moved it to system/priv-app folder and i use it as "Root + Privileged (Rom-integrated)" working mode .
So i Suggest to try your best with Xposed too!
Shade20041987 said:
I Have Z5p E6853 and Android N 7.1.1 32.4.A.0.160 stock rooted kernel and Xposed(SDK25 ARM64 ) does work on my device and a lot of modules work great and even Amplify works great, but only after i moved it to system partition and changed permissions to 777, not all modules work though (Greenify doesn't work) - but i moved it to system/priv-app folder and i use it as "Root + Privileged (Rom-integrated)" working mode .
So i Suggest to try your best with Xposed too!
Click to expand...
Click to collapse
Thanks for your feedback ?
I always use some modules like : fsbi, lolistat, hide navbar, xposed edge, battery notification mode, are these working on nougat too? Could you test them if it's possible for you? However I'm on e6833.
And is there any unistall patch for nougat xposed to flash through twrp?
mahyjooon said:
Thanks for your feedback
I always use some modules like : fsbi, lolistat, hide navbar, xposed edge, battery notification mode, are these working on nougat too? Could you test them if it's possible for you? However I'm on e6833.
And is there any unistall patch for nougat xposed to flash through twrp?
Click to expand...
Click to collapse
You are very welcome!
As for "Xposed edge pro", I use it all the time and it works great but you need to restart after every change to see the affect.
Here is the link to the Uninstaller(System-less and system mode): http://main.purifyos.it/xposed/
It literally saved me many times after boot-loops or sony logo freeze and etc...
All taken from here: https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
As for other modules, i'm currently testing another rom(LineageOS) so i haven't installed Xposed there yet, but i'll keep you posted for when i install Xposed if you wish.
Hope it helps!
Did you ran into an issue where the Xposed is installed but not active? If so how did you resolve it?
DarkSilentSC said:
Did you ran into an issue where the Xposed is installed but not active? If so how did you resolve it?
Click to expand...
Click to collapse
Make sure you install the latest Xposed Installer,
Always pick the latest("XposedInstaller_by_dvdandroid_04_08_17.apk" in this case ):
https://forum.xda-developers.com/devdb/project/?id=13191#downloads
I have tested it myself, it partly worked for me too, z5 premium dual e6833 7.1.1 build. 160, fsbi and lolistat worked partly again, I needed fsbi for changing the size of notifications,but it isn't working for notifications (
Hide navbar is not working too. I'm waiting for stable and fully work framework
I have tested. Working (7.1.1-Z5)
how to root xperia z5 premium dual
mhyr said:
Thanks for your feedback
I always use some modules like : fsbi, lolistat, hide navbar, xposed edge, battery notification mode, are these working on nougat too? Could you test them if it's possible for you? However I'm on e6833.
And is there any unistall patch for nougat xposed to flash through twrp?
Click to expand...
Click to collapse
Hi my friend,
how did you root this version of android?
My phone is the same as you but E6833,could you please help me and show me the way?
thanks in advance
Hey just a thought, I found Magisk was great in managing all of this kind of stuff, where it takes the questions out of it. Just root your phone with magisk and install the Xposed module, download and install the magisk supported Xposed app and there you have it, fully working Xposed framework, systemlessley!
Just curious... Thought I might try this so I can better customize this awesome phone.
https://forum.xda-developers.com/mi-mix/how-to/guide-flash-global-china-rom-root-gapps-t3510592
stu5797 said:
Just curious... Thought I might try this so I can better customize this awesome phone.
https://forum.xda-developers.com/mi-mix/how-to/guide-flash-global-china-rom-root-gapps-t3510592
Click to expand...
Click to collapse
Try it and report back..
Skickat från min MIX 2 via Tapatalk
stu5797 said:
Just curious... Thought I might try this so I can better customize this awesome phone.
https://forum.xda-developers.com/mi-mix/how-to/guide-flash-global-china-rom-root-gapps-t3510592
Click to expand...
Click to collapse
don't see any problem as i just flashed it on my mi 5 anodroid 7.0 (until my mix 2 arrives from gearbest)
see here for more info.
it should work, at least most of the modules.
Tried flashing all different types of xposed with no luck. This phone needs SDK 25.
stu5797 said:
Tried flashing all different types of xposed with no luck. This phone needs SDK 25.
Click to expand...
Click to collapse
I even tried with xposed for miui9 with sdk25, got stuck on booting. So no joy yet.
I was able to boot with the purify SDK 25. It was recognized in Xposed but it was not active.
I tried the official nougat release (88.1), it still says "xposed is installed but not active"
NeidRider said:
I even tried with xposed for miui9 with sdk25, got stuck on booting. So no joy yet.
Click to expand...
Click to collapse
The same on Epic Rom.
I use mokee ROM. Xposed is built in! Amazing rom
Hi Guys,
Tried to install the official SDK 88 to MIUI Epic ROM. Result was : phone booted but XPosed reported that "it is not active".
I then tried to install SolarWarez's version 25 of SDK 87. Result was : bootloop
I even tried to install several other version, like Magisk. No luck.
I really would like to see SolarWarez patching sdk88, but he seems to have vanished.
I think I found a post time ago where SolarWarez explained what he changed to the original patch and it seems it was not a lot.
But I really hope he will show up one day and patch sdk88...
stu5797 said:
I use mokee ROM. Xposed is built in! Amazing rom
Click to expand...
Click to collapse
Hi,
Really ? And you found any module working on the version of XPosed installed on Mokee ?
All those I've tried failed...
Regards.
stu5797 said:
I use mokee ROM. Xposed is built in! Amazing rom
Click to expand...
Click to collapse
Bluetooth Audio and many more bugs!
I need it for my car.
There are not too many bugs. Just a few like all custom ROMs. I have gravitybox installed and many of those mods work nicely
Hi guys,
After some research, here's what I found out.
It is not possible to use XPosed with MIUI 9 from version 7.9.21 and up.
But Xposed works quite nice with the 7.9.14 version.
You will need to get the specific Xposed for MIUI version offered by PsyMan.
It wil then run and most modules, except the ones requiring a slightly modded GUI will work I think...
Regards.
NexusPenguin said:
Hi guys,
After some research, here's what I found out.
It is not possible to use XPosed with MIUI 9 from version 7.9.21 and up.
But Xposed works quite nice with the 7.9.14 version.
You will need to get the specific Xposed for MIUI version offered by PsyMan.
It wil then run and most modules, except the ones requiring a slightly modded GUI will work I think...
Regards.
Click to expand...
Click to collapse
Do you have a link for 7.9.14?
duraaraa said:
Do you have a link for 7.9.14?
Click to expand...
Click to collapse
Hi,
Sure...
It's taken from "Globe MIUI".
Here's the link where you can select what build you want for the mi Mix 2.
This is the one I am using...
http://mi-globe.com/index.php/rom-builder/
Regards.
NexusPenguin said:
Hi,
Sure...
It's taken from "Globe MIUI".
Here's the link where you can select what build you want for the mi Mix 2.
This is the one I am using...
http://mi-globe.com/index.php/rom-builder/
Regards.
Click to expand...
Click to collapse
Thanks. I managed to figure out the URL for an older official ROM, so I'll give it a try later.
( http://bigota.d.miui.com/7.9.8/miui_CHIRON_7.9.8_7fea962602_7.1.zip )
NexusPenguin said:
Hi guys,
After some research, here's what I found out.
It is not possible to use XPosed with MIUI 9 from version 7.9.21 and up.
But Xposed works quite nice with the 7.9.14 version.
You will need to get the specific Xposed for MIUI version offered by PsyMan.
It wil then run and most modules, except the ones requiring a slightly modded GUI will work I think...
Regards.
Click to expand...
Click to collapse
Ok, so, I gave this a try, but with 7.9.8 (linked in my previous post).
After flashing supersu (or magisk) and the xposed I found here (I'm assuming this is the one you used?)
https://forum.xda-developers.com/xposed/unofficial-xposed-miui-9-t3688486
The phone wouldn't boot.
Any suggestions? Did you do anything different?
Any one have a working version of xposed for miui 9?
Can't seem to get a version that boots with 7.10.19.
I' ve a Mi mix 2 with Resurrection Remix 5.8.5, is there a working version of xposed?
Hei whatsup folks....So Trying Custom Roms..Right...Most Of The Time You May Came across Problem in Installing "Greenify4Magisk" In Magisk as it Only Support Until SDK 27.So...i too faced same problem when trying to install Greenify as System app...and To Be frank This Zip Is Just Edited Version...all Credits Goes to Original Devs Who craeted It.So By Using This Zip You Will Be Able To Use
Greenify In Pie roms and Also as a system app...Just Import In Magisk Modules and reboot...It should work Without Any Problem....Whatever for me everything seems fine....This Version Contains Latest APK of Greenify...!!
So Enjoy Happy Greenifying....!!!!!
This Is Strictly Magisk Module ...Never Try To Install It Through Recoveries...!
Download Link: https://drive.google.com/file/d/1oqSGwDQGO3GMLeMRvIMGAftK4_bhqIIl/view?usp=drivesdk
Sachinkerala said:
Hei whatsup folks....So Trying Custom Roms..Right...Most Of The Time You May Came across Problem in Installing "Greenify4Magisk" In Magisk as it Only Support Until SDK 27.So...i too faced same problem when trying to install Greenify as System app...and To Be frank This Zip Is Just Edited Version...all Credits Goes to Original Devs Who craeted It.So By Using This Zip You Will Be Able To Use
Greenify In Pie roms and Also as a system app...Just Import In Magisk Modules and reboot...It should work Without Any Problem....Whatever for me everything seems fine....This Version Contains Latest APK of Greenify...!!
So Enjoy Happy Greenifying....!!!!!
This Is Strictly Magisk Module ...Never Try To Install It Through Recoveries...!
Download Link: https://drive.google.com/file/d/1oqSGwDQGO3GMLeMRvIMGAftK4_bhqIIl/view?usp=drivesdk
Click to expand...
Click to collapse
Awesome! Thanks for the work
Update Is Up....!!
Greenify Module is Updated With Latest Version 4.7 Pro......!!!
https://drive.google.com/file/d/1--x319u5NoUHBQyCXrZQiTdK7yfYaKkW/view?usp=drivesdk
-Thanks
Sachinkerala said:
Update Is Up....!!
Greenify Module is Updated With Latest Version 4.7 Pro......!!!
https://drive.google.com/file/d/1--x319u5NoUHBQyCXrZQiTdK7yfYaKkW/view?usp=drivesdk
-Thanks
Click to expand...
Click to collapse
Thank you for your hard work!
Thanks for the app! It didn't worked, so I manually moved the app to System/priv-app through TWRP, mounted System and did that in File Manager, that worked.
Only problem I have is that after restart, all the Xposed/Donation features are getting unticked, really annoying.. I think I tried almost everything, but can't seem to make it work.
Anyone got a solution for this, please?
Got an S9 G960F running custom android 9 by Soldier9312 with TGP kernel selinux permissive.
Thanks in advance!