Develop Bugs

passing safetynet on miui 10 global beta failed(magisk 16)

cannot pass safety net on miui 10 global beta .
i installed root using magisk 16.
everything works fine ( Gcam, viper4droid etc)
but my safetynet is broken.
cts profile mismatch is true.
i m unable to find any solution.
tried universal safety net fix through twrp it says no magisk installed but root is working properly.
can anyone fix it?

wirex13 said:
cannot pass safety net on miui 10 global beta .
i installed root using magisk 16.
everything works fine ( Gcam, viper4droid etc)
but my safetynet is broken.
cts profile mismatch is true.
i m unable to find any solution.
tried universal safety net fix through twrp it says no magisk installed but root is working properly.
can anyone fix it?
Click to expand...
Click to collapse
Install the fix through magisk directly. Not twrp.

change your device fingerprint in build. prop file.. and then reboot ..voila!
you can replace fingerprint with stable rom v9. 5.13

Can anyone share the stable rom's fingerprint from their device?? It will be very helpful.
Edit :-I have found a fix and stable rom's fingerprint in this thread.
https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228
And its working very well. Hope that helps you. Ask me if you need any help about enabling this module because its a bit different than others.

otonieru said:
Install the fix through magisk directly. Not twrp.
Click to expand...
Click to collapse
its says
Copying zip to temp directory - Installing ... Failed! !

wirex13 said:
its says
Copying zip to temp directory - Installing ... Failed! !
Click to expand...
Click to collapse
If that so, theres chance your magisk installation was derp. Try reinstalling magisk first. Or use the safetynet prop fix module, not the universal one.

RockStar8 said:
Can anyone share the stable rom's fingerprint from their device?? It will be very helpful.
Edit :-I have found a fix and stable rom's fingerprint in this thread.
https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228
And its working very well. Hope that helps you. Ask me if you need any help about enabling this module because its a bit different than others.
Click to expand...
Click to collapse
i used above steps but in terminal it says
"the settings boot script does not appeared to run during boot"
this means the module doesn't work.

dipak9477 said:
change your device fingerprint in build. prop file.. and then reboot ..voila!
you can replace fingerprint with stable rom v9. 5.13
Click to expand...
Click to collapse
can u provide ro fingerprint
ro.build.fingerprint =

wirex13 said:
i used above steps but in terminal it says
"the settings boot script does not appeared to run during boot"
this means the module doesn't work.
Click to expand...
Click to collapse
The module itself has Redmi Note 5 Pro Oreo MIUI 9.5 Stable signature added in its database. You just need to download and flash the module from magisk and reboot. Then open terminal and run command su then allow root access then run command props choose change device signature then choose Redmi Note 5 Pro then Confirm and Reboot. Just remember to reboot after installing the module and then use terminal commands.

dipak9477 said:
change your device fingerprint in build. prop file.. and then reboot ..voila!
you can replace fingerprint with stable rom v9. 5.13
Click to expand...
Click to collapse
just replace miui version in ro. build. fingerprint with V9.5.13.0.OEIMIFA

[MOD][XPOSED+MAGISK][2018/10/05 1.0]Xperia Screen Mirroring/Miracast Fix (Oreo)

This Xposed and Magisk combo allows Xperia Oreo devices to use Screen Mirroring with non HDCP Miracast TV/devices. The solution was originally published by M-Rom. I just put them into Xposed and Magisk modules.
Requirements
Sony Xperia phone
Your phone must be rooted
Xposed framework must be installed first http://forum.xda-developers.com/showthread.php?t=1574401
Magisk framework must be installed first https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Instructions
Install the Xposed module Xperia Wifi Display fix (Oreo)
Download the Magisk module (attachment in this post)
Download the /system/etc/wfdconfig.xml file from your device
Follow the instructions in post #2 to edit the wfdconfig.xml file
Replace the wfdconfig.xml file in Xperia-Wifi-Display-fix.zip with the edited version. Remember to put it in the folder /system/etc/. 7-Zip can do the job easily.
Install the updated Xperia-Wifi-Display-fix.zip in Magisk Manager
Run Xposed Installer and enable the module Xperia Wifi Display fix (Oreo)
Reboot
Download
Xposed Module Repository
Credits
Original mod by M-Rom

Instructions to update wfdconfig.xml file:
Update the value highlighted below in Red from 1 to 0.
<!-- enable HDCP by default -->
<ContentProtection>
<Valid>1</Valid>
<!--
Valid values WFD_HDCP_2_0,
WFD_HDCP_2_1 and WFD_HDCP_2_2
-->
<Version>WFD_HDCP_2_2</Version>
<CPPort>6789</CPPort>
<!--
turn on/off audio encryption
-->
<EncryptAudio>1</EncryptAudio>
</ContentProtection>
Click to expand...
Click to collapse

magisk modul should solve the problem with some build.prop mod

karrouma said:
magisk modul should solve the problem with some build.prop mod
Click to expand...
Click to collapse
Yes Magisk module solves the problem of editing the build.prop and wfdconfig.xml files. But on Oreo, the system package WfdService.apk needs to be modded too. That's why the Xposed module is also needed.

itandy said:
Yes Magisk module solves the problem of editing the build.prop and wfdconfig.xml files. But on Oreo, the system package WfdService.apk needs to be modded too. That's why the Xposed module is also needed.
Click to expand...
Click to collapse
Installed xposed
Restart and install xposed module
Restart and installed magisk module
Restart
Now my smart watch can't connect and phone not showing it
Restore and all is fine

karrouma said:
Installed xposed
Restart and install xposed module
Restart and installed magisk module
Restart
Now my smart watch can't connect and phone not showing it
Restore and all is fine
Click to expand...
Click to collapse
But can you use Screen Mirroring on non HDCP device using these modules?

itandy said:
But can you use Screen Mirroring on non HDCP device using these modules?
Click to expand...
Click to collapse
yes with my smart sony tv and with miracast

karrouma said:
yes with my smart sony tv and with miracast
Click to expand...
Click to collapse
Can you disable the Magisk module, reboot and send me the following system file?
system\etc\wfdconfig.xml

itandy said:
Can you disable the Magisk module, reboot and send me the following system file?
system\etc\wfdconfig.xml
Click to expand...
Click to collapse
Attached as zip

karrouma said:
Attached as zip
Click to expand...
Click to collapse
Please update the Magisk module with the attachment in this post.

IMPORTANT!
Anyone using this module should follow the new instructions in OP to customize your own Magisk module. I found that one of the system file /system/etc/wfdconfig.xml varies from device to device. So the version in the Xperia-Wifi-Display-fix.zip file might not be appropriate for you. The new instructions tell you how to customize your own version.

itandy said:
This Xposed and Magisk combo allows Xperia Oreo devices to use Screen Mirroring with non HDCP Miracast TV/devices. The solution was originally published by M-Rom. I just put them into Xposed and Magisk modules.
Click to expand...
Click to collapse
@russel5 had made a magisk module that alone is enough to make mirroring work on my xz1 compact. You may want to be in touch with him? Is using both magisk and xposed any good?

rsk_kelkar said:
@russel5 had made a magisk module that alone is enough to make mirroring work on my xz1 compact. You may want to be in touch with him? Is using both magisk and xposed any good?
Click to expand...
Click to collapse
Do you have the link to his module?

rsk_kelkar said:
@russel5 had made a magisk module that alone is enough to make mirroring work on my xz1 compact. You may want to be in touch with him? Is using both magisk and xposed any good?
Click to expand...
Click to collapse
I found that we're actually doing the same thing. But he includes the WfdService.apk in the Magisk module. And I use Xposed to mod this APK in real-time. My method works with different version of WfdService.apk in different device while his method replace it with his version.

Yes, but i knew only few people who use xposed for our phone, because
* for working xposed we need fix (it's not work after april security patch)
* with working xposed don't work payments via nfc because safetynet always fail
So i made it only for our phone for magisk, because magisk use all

russel5 said:
Yes, but i knew only few people who use xposed for our phone, because
* for working xposed we need fix (it's not work after april security patch)
* with working xposed don't work payments via nfc because safetynet always fail
So i made it only for our phone for magisk, because magisk use all
Click to expand...
Click to collapse
Yes I understand because I'm facing the same issue with latest security patch and SafefyNet stuff. But there're just too many Xposed modules that I need to use daily. And there're just things that Magisk can't do, unfortunately.

Anyone still using this mod? Followed the steps thoroughly, but mirroring is still restricted to a few system apps...

Best Magisk Modules for Xiaomi Mi A2 Lite

Hi, I created this my first thread to know which Magisk modules you use with your Xiaomi mi a2 lite and then later maybe create a list of the best ones.
Mine are:
-HAL3 enabler - Camera2 Api support
-Youtube Vanced - Magisk Repo
-Viper4Android FX
-NotchKiller
- GPU Turbo Boost

Rboard themes, are gboard themes, very cool, i highly recommended.

Txatxiquesi said:
Rboard themes, are gboard themes, very cool, i highly recommended.
Click to expand...
Click to collapse
Other modules ??

I don't use gpu turbo since it didn't change the performance at all, I tried with the 3dmark test and the result was the exact same. I personally like System Accent Theme and Magisk Manager for Recovery Mode (just in case you install a module that makes your device bootloop).

Willy1992 said:
I don't use gpu turbo since it didn't change the performance at all, I tried with the 3dmark test and the result was the exact same. I personally like System Accent Theme and Magisk Manager for Recovery Mode (just in case you install a module that makes your device bootloop).
Click to expand...
Click to collapse
Do you need a custom recovery for magisk recovery module??

boe323 said:
Do you need a custom recovery for magisk recovery module??
Click to expand...
Click to collapse
You dont need a custom recovery for all the modules but for the last one I talk about it is esential since you use the terminal in the recovery mode to access this tool

Willy1992 said:
You dont need a custom recovery for all the modules but for the last one I talk about it is esential since you use the terminal in the recovery mode to access this tool
Click to expand...
Click to collapse
Ok thanks, do you know anything about magisk beta v19??, can it be installed as an update through magisk or do you need to completley remove magisk??, the new version no longer uses an image, its all mounted in data.

boe323 said:
Ok thanks, do you know anything about magisk beta v19??, can it be installed as an update through magisk or do you need to completley remove magisk??, the new version no longer uses an image, its all mounted in data.
Click to expand...
Click to collapse
I just heard of it today, it doesnt seem like you can install it from the magisk manager app (at least with the stable channel selected) as it doesnt show that there is an update but ill try to search for some more info in the future since in my opinion it may be early to install the update and magisk 18.1 works perfectly for me

Willy1992 said:
I just heard of it today, it doesnt seem like you can install it from the magisk manager app (at least with the stable channel selected) as it doesnt show that there is an update but ill try to search for some more info in the future since in my opinion it may be early to install the update and magisk 18.1 works perfectly for me
Click to expand...
Click to collapse
I think you need to change channels unless you have to go to the main site, i cant find anything on installing over traditional magisk.

I haven't rooted yet so haven't had a chance to check this but does anyone know if the ambient display gestures module work for a2 lite?

kingd421 said:
I haven't rooted yet so haven't had a chance to check this but does anyone know if the ambient display gestures module work for a2 lite?
Click to expand...
Click to collapse
I tested different ones in the past and none of them worked.

thorin0815 said:
I tested different ones in the past and none of them worked.
Click to expand...
Click to collapse
only one that works is AODEnabler, the version that installs it to product overlay, no gestures though, but it links into the phone always on display and all the animation is there between notifications, live wallpaper also works while showing the always on display.

I'm using the following modules:
- Advanced Charging Controller (acc)
- Busybox for Android NDK
- Daily Job Scheduler (djs) *it comes w/ acc*
- Universal GMS Doze
- ViPER4Android FX
- Youtube Vanced
Other note-worthy modules that I've used before:
- Energized Protection
- CloudflareDNS4Magisk
- CloudflareDNS4Magisk IPv6

elvinguitar said:
I'm using the following modules:
- Advanced Charging Controller (acc)
- Busybox for Android NDK
- Daily Job Scheduler (djs) *it comes w/ acc*
- Universal GMS Doze
- ViPER4Android FX
- Youtube Vanced
Other note-worthy modules that I've used before:
- Energized Protection
- CloudflareDNS4Magisk
- CloudflareDNS4Magisk IPv6
Click to expand...
Click to collapse
For some reason Busybox module breaks my data connection. If installed the mobile data is disconnected.

gkornaks said:
For some reason Busybox module breaks my data connection. If installed the mobile data is disconnected.
Click to expand...
Click to collapse
I didn't encounter that kind of issue.

My Magisk modules
- Busybox
- Systemless TZData
- F-Droid extension
- Debloater (v17 doesn't work with magisk 18)
- Riru/EdXposed
- mm
I use debloater so that services like Google Maps can be made non-system (possible to restrict) and to hide the launcher (Oreo recents).
I have EdXposed for no Google play games (stop annoying nag every time I start a game).
Mm let's me recover from magisk modules that boot loop. Boot into twrp and modules can be disabled.

I think Pix3lify (gives you them beautiful rounded corners and Pixel Blue accent colors) and QuickSwitch (lets you change your default launcher without breaking the recents, install Lawnchair v2 or OnePlus Launcher port by paphonb after that) are the must install modules on this device.

marstonpear said:
I think Pix3lify (gives you them beautiful rounded corners and Pixel Blue accent colors) and QuickSwitch (lets you change your default launcher without breaking the recents, install Lawnchair v2 or OnePlus Launcher port by paphonb after that) are the must install modules on this device.
Click to expand...
Click to collapse
Could you please give a link for the one plus launcher? I simply can't find it. Thanks in advance

hncdesilva said:
Could you please give a link for the one plus launcher? I simply can't find it. Thanks in advance
Click to expand...
Click to collapse
Here's the complete guide (link in guide): https://www.xda-developers.com/oneplus-launcher-recent-apps-interface-android-pie/

marstonpear
Click to expand...
Click to collapse
Txatxiquesi
Click to expand...
Click to collapse
Willy1992
Click to expand...
Click to collapse
at1291762
Click to expand...
Click to collapse
Will u guys mind very much adding links for d various modules u mentioned?
Thanks.

[MAGISK MODULE][ASH6] Powermenu reboot mod / volume warning removal / mock location

Simple magisk module that modifys the powermenu behaviour to boot directly back into magisk when selecting the reboot option.
I created this for personal use, thought I would share just in case someone else finds it useful.
I've also added the patches to "smali patcher" for future firmware updates which will allow you to generate your own updated modules based on new firmware bases!
You can find smali patcher: HERE
It uses the same module ID as smali patcher generated modules, this by design they should overwrite one another.
PATCHES ::
Mock locations - Hide mock locations status, allowing apps like Pokemon GO to treat them as genuine location updates.
Magisk reboot (Galaxy S10) - Reboot directly back into magisk from powermenu.
High volume warning - Disable high volume popup dialog.
If for whatever reason you find yourself in a boot loop caused by using this mod on a different rom base than the one specified in the thread title:
fOmey said:
You can remove magisk modules from recovery mode.. dont need any third party tools.
Boot into TWRP
Advanced -> File Manager
Navigate to: data -> adb -> modules -> module directory (in this case "fomey.smalipatcher") -> Folder icon (bottom right) -> Delete
Click to expand...
Click to collapse
I've removed any posts regarding xposed from this thread.. this was done to prevent this thread being filled up with "xposed support" posts. Please take all future xposed discussion to their own relevant threads.

Installed it and phone is now stuck in a boot loop -.-

Thanks! Working for me on S10+

FPSkillerPC said:
Installed it and phone is now stuck in a boot loop -.-
Click to expand...
Click to collapse
You are using this on a ASCA base rom right?

Not sure if this is relevant but there appears to be a bug with the TWRP magisk patched root method where trying to get into TWRP after the first boot causes a Bootloop. I've experienced this also but it's not caused by this module. A few people have reported it to Geite on his post so hopefully he can replicate it in the coming days

edited: working fine with s10+ thanks

fOmey said:
You are using this on a ASCA base rom right?
Click to expand...
Click to collapse
what does this mean?

IsocolXDA said:
what does this mean?
Click to expand...
Click to collapse
You shouldn't be playing with root twrp and roms if you don't understand what that means :/

Very good work!! Thanks!!
Working perfect on S10+ 975F

aussiesausage said:
You shouldn't be playing with root twrp and roms if you don't understand what that means :/
Click to expand...
Click to collapse
Im not, i was just wondering. I am using root for greenify and some minor customisation.

IsocolXDA said:
what does this mean?
Click to expand...
Click to collapse
ASCA is the end of the rom build number this module was created with, every rom build/update has a unique build number (you can find this in settings -> about -> software).
General rule of thumb is use mods that match your rom build number to avoid any funny business (crashing & boot loops).. if your using mismatch mod/rom build numbers it can cause havoc.

An alternative method of achieving the same thing without the hassle of having to wait for an updated Magisk module every time Samsung releases new firmware is to use the FireFDS Xposed module in combination with EdXposed. This will work transparently across firmware versions.
Screenshot of my S10+'s power menu attached.

ianmacd said:
An alternative method of achieving the same thing without the hassle of having to wait for an updated Magisk module every time Samsung releases new firmware is to use the FireFDS Xposed module in combination with EdXposed. This will work transparently across firmware versions.
Screenshot of my S10+'s power menu attached.
Click to expand...
Click to collapse
Offtopic: Are you passing safetynet with EdXposed? I miss xposed..

fOmey said:
Offtopic: Are you passing safetynet with EdXposed? I miss xposed..
Click to expand...
Click to collapse
I certainly am. That's one of the best side-effects of running EdXposed as opposed to Rovo's original.
A few months ago, EdXposed was looking like a pale shadow of the original, but the work that GravityBox's developer has done in the last month or so to make that project work on Pie with EdXposed has really put EdXposed on the map.
Sent from my SM-T830 using XDA Labs

ianmacd said:
I certainly am. That's one of the best side-effects of running EdXposed as opposed to Rovo's original.
A few months ago, EdXposed was looking like a pale shadow of the original, but the work that GravityBox's developer has done in the last month or so to make that project work on Pie with EdXposed has really put EdXposed on the map.
Sent from my SM-T830 using XDA Labs
Click to expand...
Click to collapse
That's awesome, will have to check it out for myself.

@fOmey
any love for latest patch ?

Removed
---------- Post added at 05:54 PM ---------- Previous post was at 05:52 PM ----------
ianmacd said:
An alternative method of achieving the same thing without the hassle of having to wait for an updated Magisk module every time Samsung releases new firmware is to use the FireFDS Xposed module in combination with EdXposed. This will work transparently across firmware versions.
Screenshot of my S10+'s power menu attached.
Click to expand...
Click to collapse
I already use this module but the reboot button do not do the trick (magisk sys reboot). Did I miss something?

Dockyy said:
I already use this module but the reboot button do not do the trick (magisk sys reboot). Did I miss something?
Click to expand...
Click to collapse
Choose the Recovery button, not the normal Restart one.

ianmacd said:
Choose the Recovery button, not the normal Restart one.
Click to expand...
Click to collapse
Nice thanks!!

TheUndertaker21 said:
@fOmey
any love for latest patch ?
Click to expand...
Click to collapse
I havnt installed the latest patch yet, I'm sticking with my region update cycle.
You can generate a new module yourself tho, visit the smali patcher thread linked on the first post.. the entire process is automated, you simply need to select the patches you want to use and install the module.

Question "System download package complete"

I have this message, but since the phone is rooted I'm very scared if I should install this download, I don't even know what it is, so didn't open this message.
Unfortunately it can't be removed, so what now?

Could you check this notification form which application comes?

Abdullah.Csit said:
Could you check this notification form which application comes?
Click to expand...
Click to collapse
I went to settings, system, system updates.
There it states my phone is rooted and that updating will unroot. I'm a bit scared that they push the new Android 12 to me, with all problems this will probably mean they will kill my phone...
The update is 3061 MB (for the EU-version 9 pro)

Oh, it sais:
Optimized the third-party app experience
Updated Android security patch to 2021.11
Improved System stability and fixed known issues
So no android 12 I think, but still... How to install this and then root once again? I mean, should I boot with a temporary twrp or batched boot and then reapply the patch from magisk, or does this also uninstall magisk?

Bright.Light said:
Oh, it sais:
Optimized the third-party app experience
Updated Android security patch to 2021.11
Improved System stability and fixed known issues
So no android 12 I think, but still... How to install this and then root once again? I mean, should I boot with a temporary twrp or batched boot and then reapply the patch from magisk, or does this also uninstall magisk?
Click to expand...
Click to collapse
Updating your device will not let you losing root, Just in a12 case you had to use canary build but there is no magisk hide.

Read this - sticky post btw
And you will find how to update without losing root
[GUIDE] [Magisk] [Unlock / ROOT / Keep Root] OOS 13.1.0.500
Different variants of Magisk that are available for use : Magisk Variant Stable / Beta / Canary Release Official Android / OOS OOS 11 and above Maintainer topjohnwu Project Link GitHub Zygisk No...
forum.xda-developers.com