Develop Bugs

xposed now working on tab s3

A modified xposed installer and framework for nougat is now available thanks to the Purify os team and rovo
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
Follow the link above.
1. Make backups, twrp/titanium
2. Install the modified xposed installer first, must be done first!
https://forum.xda-developers.com/devdb/project/?id=13191#downloads
Use the top one on the list it may get updated
3. Next download the modified xposed framework from Purify here
http://fastkit.org/xposed/
Follow the links.... SDK24 for nougat 7.0..... Then download the xposed version 87 model... Flash from twrp
Again make sure you fully back up, it all went fine for me, but sometimes these things don't go right.
Plenty of posts in the linked forum but a bit of a jumble as usual, all with varied results, but the above will work for us.
Not sure how many modules are usable yet, I have one working so I know it does work.

Which are you using, and what would you like to use?

undrwater said:
Which are you using, and what would you like to use?
Click to expand...
Click to collapse
Status bar sleep.. Working
Status bar download progress.... Working (mostly)
Status bar cpu temp.. Not working
Status bar cpu frequency.. Not working
Any of the status bar theming such as wanams xtouchwiz would be good
Also xinternalsd was useful but not working

Can you change aspect ratio yet?

blaze82 said:
Can you change aspect ratio yet?
Click to expand...
Click to collapse
Not something I would normally do, is there a particular module you use for that?

It's been such a long time since I came across this, being able to adjust screen ratio and dpi on a per app basis. No real reason to now but with the 4:3 ratio on this tab, it'll be nice.
Also, been a while since I've used xbosed

does not work for me.. i get a recovery-boot loop and it does not start the system

Ch3ck3rM0n said:
does not work for me.. i get a recovery-boot loop and it does not start the system
Click to expand...
Click to collapse
I have been using it without problem for a while, but the versions used are crucial to success, I couldn't get the magisk systemless to work. Try going back to the beginning and make sure each download is correct, the method in the first post will work.

hmm.. but i need magisk :-/

Ch3ck3rM0n said:
hmm.. but i need magisk :-/
Click to expand...
Click to collapse
Ok, it may be possible for it to work, I didn't persist with it, what is the benefit with magisk for you?

rorymc928 said:
Ok, it may be possible for it to work, I didn't persist with it, what is the benefit with magisk for you?
Click to expand...
Click to collapse
Get it work with super su but installed OBBonSD does not work (with GTA, KotoR,...). Do you have any idea?
EDIT: Found a solution with http://repo.xposed.info/module/com.pyler.xinternalsd

I have followed the directions exactly and I tried twice to install xposed on my t825 rooted with magisk 14. No luck unfortunately. Has anybody been successful in installing it ??
If yes, could he share the methodology ?

xpil said:
... with magisk 14
Click to expand...
Click to collapse
had the same problem.. remove magisk and install superSU.. xposed do not work with magisk -.-' on this tablet..

Question, how do I remove xposed again?
Can I do it with the installer app, or do I need a special skript? Never used Xposed on Samsung before and I know everything works differently.

Hello,
Your experience : Do you have a "" Tab S3 SM-T825, Nougat 7.0, Root SuperSU "" on which you have installed Xposed.
1- Does Xposed work normally with different modules?
(No Bootloop or tablet block?)
2 - Which version xposed * .zip ?
3 - Which Version XposedInstaller _ *. Apk ?
Thank you
Cordially
Yam_y

Yam_y said:
Hello,
Your experience : Do you have a "" Tab S3 SM-T825, Nougat 7.0, Root SuperSU "" on which you have installed Xposed.
1- Does Xposed work normally with different modules?
(No Bootloop or tablet block?)
2 - Which version xposed * .zip ?
3 - Which Version XposedInstaller _ *. Apk ?
Thank you
Cordially
Yam_y
Click to expand...
Click to collapse
Fairly old thread this, I have a T820, however I've made roms for both variants, the t825 thread is here,
https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t825-tweaked-t3769742
the earlier versions are nougat the latest 3.0 on are oreo both work fine, you'll find instructions in the thread, if changing to oreo you need to flash the oreo bootloader, through odin, if returning to nougat you need to flash the older nougat bootloader as they're not cross compatible.
Xposed works fine on both, xposed installer included after booting, start the xposed installer app and select install it picks the correct version.
Root is by magisk.

rorymc928 said:
Fairly old thread this, I have a T820, however I've made roms for both variants, the t825 thread is here,
https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t825-tweaked-t3769742
the earlier versions are nougat the latest 3.0 on are oreo both work fine, you'll find instructions in the thread, if changing to oreo you need to flash the oreo bootloader, through odin, if returning to nougat you need to flash the older nougat bootloader as they're not cross compatible.
Xposed works fine on both, xposed installer included after booting, start the xposed installer app and select install it picks the correct version.
Root is by magisk.
Click to expand...
Click to collapse
Hello Rorymc
Thanks for the answer and for the link SM-T825 TWEAKED, but I'm already Root with SuperSU + Dm-Verity with Rom ARA2 Nougat 7.0 and I just have to flash Xposed with TWRP.
So, I think I have to take Xposed.zip and Xposedinstaller APK from rovo89 in pure version without add and unmodified ?
I hope I'm not mistaken .....
Cordially
Yam

Yam_y said:
Hello Rorymc
Thanks for the answer and for the link SM-T825 TWEAKED, but I'm already Root with SuperSU + Dm-Verity with Rom ARA2 Nougat 7.0 and I just have to flash Xposed with TWRP.
So, I think I have to take Xposed.zip and Xposedinstaller APK from rovo89 in pure version without add and unmodified ?
I hope I'm not mistaken .....
Cordially
Yam
Click to expand...
Click to collapse
Yes that's correct, just make sure you get the correct versions, if anything goes wrong just restore your backup.

rorymc928 said:
Yes that's correct, just make sure you get the correct versions, if anything goes wrong just restore your backup.
Click to expand...
Click to collapse
Hello,
Thank you. Well understood. I like your precise answers
Cordially
Yam

Xposed Module

Can we use xposed Module on Redmi Note 5 Pro

kbsarfaraz said:
Can we use xposed Module on Redmi Note 5 Pro
Click to expand...
Click to collapse
Ofc

But when flashing zip using recovery, device stuck on mi logo

kbsarfaraz said:
But when flashing zip using recovery, device stuck on mi logo
Click to expand...
Click to collapse
Download and install the xposed installer first and download zip through it.

- Install Magisk
- Go to Download section, search for xposed
- Install the xPosed installer for Magisk given in the text link
- Install the suitable framework
works and does not get kicked out by ROM updates.

Xposed doesn't work on miui 10 for our device. It gives bootloop.

I believe SELinux has to be _permissive_

peter-k said:
- Install Magisk
- Go to Download section, search for xposed
- Install the xPosed installer for Magisk given in the text link
- Install the suitable framework
works and does not get kicked out by ROM updates.
Click to expand...
Click to collapse
are you sure?
ive tried rovos twrp and magisk both ends in bootloop on miui oreo.

raptorddd said:
are you sure?
ive tried rovos twrp and magisk both ends in bootloop on miui oreo.
Click to expand...
Click to collapse
Yep, that's right.
He asked: Can we use xposed Module on Redmi Note 5 Pro?

For now use custom rom for xposed

peter-k said:
Yep, that's right.
He asked: Can we use xposed Module on Redmi Note 5 Pro?
Click to expand...
Click to collapse
well we can but it bootloops on me. are you using it right now?
i remeber you use microG well theres a way supposely to inject signature spoofing on miui 10
you also said you made flashable .. no need theres one in this thread.
https://forum.xda-developers.com/showpost.php?p=77460913&postcount=3798

raptorddd said:
well we can but it bootloops on me. are you using it right now?
i remeber you use microG well theres a way supposely to inject signature spoofing on miui 10
you also said you made flashable .. no need theres one in this thread.
https://forum.xda-developers.com/showpost.php?p=77460913&postcount=3798
Click to expand...
Click to collapse
I have seen you referring this microG many times with much admiration. The only microG I know is a small app required to sign in YouTube vanced and the older og YouTube. But of course you are talking about something much more complex. So what is that much useful that microG and fake gapps offer? I predict that it might need a lengthy answer so a summary would be good enough too.

raptorddd said:
well we can but it bootloops on me. are you using it right now?
i remeber you use microG well theres a way supposely to inject signature spoofing on miui 10
you also said you made flashable .. no need theres one in this thread.
https://forum.xda-developers.com/showpost.php?p=77460913&postcount=3798
Click to expand...
Click to collapse
Raptorddd, it is not possible using xPosed modules or framework on MIUI based ROMs. I was merely answering the general question if it can be installed on the Redmi Note 5. That question did not ask for MIUI.
To make that clear once again to all other users:
- MIUI uses a special framework that does not allow working with usual xPosed framwork
- Oreo AOSP and LIneage based ROMs do install and work with xPosed.
I have never used Gapps on my Redmi Note 5. I have microG on all my Oreo ROMs based on AOSP and Lineage. The easiest are Havoc and Aosip, these happen to be the two best ones at this time (for me). I have packed the Google Sync adapters and all microG modules in two zip files that I can flash from TWRP. That way the somewhat tedious installation of microG is vastly simplyfied when changing ROM. Nanodroid in the thread includes items I don't want.

peter-k said:
Raptorddd, it is not possible using xPosed modules or framework on MIUI based ROMs. I was merely answering the general question if it can be installed on the Redmi Note 5. That question did not ask for MIUI.
To make that clear once again to all other users:
- MIUI uses a special framework that does not allow working with usual xPosed framwork
- Oreo AOSP and LIneage based ROMs do install and work with xPosed.
I have never used Gapps on my Redmi Note 5. I have microG on all my Oreo ROMs based on AOSP and Lineage. The easiest are Havoc and Aosip, these happen to be the two best ones at this time (for me). I have packed the Google Sync adapters and all microG modules in two zip files that I can flash from TWRP. That way the somewhat tedious installation of microG is vastly simplyfied when changing ROM. Nanodroid in the thread includes items I don't want.
Click to expand...
Click to collapse
ok got it.. i tought you had it on miui.. they are working on a patcher for 8.1 in nanodroid.. theres a guy with miui also helping.
---------- Post added at 07:06 PM ---------- Previous post was at 06:48 PM ----------
kostas gp said:
I have seen you referring this microG many times with much admiration. The only microG I know is a small app required to sign in YouTube vanced and the older og YouTube. But of course you are talking about something much more complex. So what is that much useful that microG and fake gapps offer? I predict that it might need a lengthy answer so a summary would be good enough too.
Click to expand...
Click to collapse
well lets say its a lite version of google play services.. means more battery and also i can feel more responsive and snappier once you remove it. the only thing i log in is my google account for playstore.. microg replaces playservices.. that has like 300 services and and maybe 20 are on. while microg has like 7 or so.. on and less then 20 services..
i just want longer battery and more performance.. with microG that guy said on link that he added the signature to miui 10. i have not tried it yet.. easy way is magisk module or in nougat roms that are deodexed... oreo is odexed so cant patch it.. they are working on a patch that woks on oreo.. also 9.0 pie has problems i assumed rom is deodexed.

Gapps is a major contributor to battery consumption, most of the services are calling home functions that ensure Google gets also the last bit of where you go and what you do. Google Play services ensures this still happening in particular when there are non-Google apps running. Over the years it has been developed from an acceptable application framework to ensure location, notification and app service functions to a heavy prying tool. It is important for Google, which that is why it's force updated.
Google is making app developers disabling apps functioning, if no Google apps are installed, even though the app would work perfectly fine without.
That is where microG comes in. It is a not always a 100% replacement, some apps such as Google maps work only partially with microG, though there are alternatives for almost everything. https://shadow53.com/android/no-gapps/setup-guide/microg/

Tried to flash Xposed today only via Magisk 17.1v
Ended up in bootloop for MIUI 10 Developer ROM.
P.S.- Reflash the same zip via Recovery to uninstall and get out of boot loop

Some are claiming Xposed v90-beta3 is working with MIUI 10 but i've tried and it just results in a bootloop or booting to TWRP.
Has anyone on here had any success with xposed and MIUI 10?

Doesn't work, I tried and it too ended up in bootloop.

raptorddd said:
ok got it.. i tought you had it on miui.. they are working on a patcher for 8.1 in nanodroid.. theres a guy with miui also helping.
---------- Post added at 07:06 PM ---------- Previous post was at 06:48 PM ----------
well lets say its a lite version of google play services.. means more battery and also i can feel more responsive and snappier once you remove it. the only thing i log in is my google account for playstore.. microg replaces playservices.. that has like 300 services and and maybe 20 are on. while microg has like 7 or so.. on and less then 20 services..
i just want longer battery and more performance.. with microG that guy said on link that he added the signature to miui 10. i have not tried it yet.. easy way is magisk module or in nougat roms that are deodexed... oreo is odexed so cant patch it.. they are working on a patch that woks on oreo.. also 9.0 pie has problems i assumed rom is deodexed.
Click to expand...
Click to collapse
Indeed, long battery would be just fine, I expected working for nearly 24 hours but my phone had no charge in 18 hours or maybe it's the issue with my device?
Отправлено с моего MS650 через Tapatalk

I've just bought whyred in Indonesia. My rom is official OREO but still MIUI 9.X. I wanna use Xposed Installer for Gojek. Could I install Xposed installer on my Whyred? Thanks

Best Magisk Modules for Xiaomi Mi A2 Lite

Hi, I created this my first thread to know which Magisk modules you use with your Xiaomi mi a2 lite and then later maybe create a list of the best ones.
Mine are:
-HAL3 enabler - Camera2 Api support
-Youtube Vanced - Magisk Repo
-Viper4Android FX
-NotchKiller
- GPU Turbo Boost

Rboard themes, are gboard themes, very cool, i highly recommended.

Txatxiquesi said:
Rboard themes, are gboard themes, very cool, i highly recommended.
Click to expand...
Click to collapse
Other modules ??

I don't use gpu turbo since it didn't change the performance at all, I tried with the 3dmark test and the result was the exact same. I personally like System Accent Theme and Magisk Manager for Recovery Mode (just in case you install a module that makes your device bootloop).

Willy1992 said:
I don't use gpu turbo since it didn't change the performance at all, I tried with the 3dmark test and the result was the exact same. I personally like System Accent Theme and Magisk Manager for Recovery Mode (just in case you install a module that makes your device bootloop).
Click to expand...
Click to collapse
Do you need a custom recovery for magisk recovery module??

boe323 said:
Do you need a custom recovery for magisk recovery module??
Click to expand...
Click to collapse
You dont need a custom recovery for all the modules but for the last one I talk about it is esential since you use the terminal in the recovery mode to access this tool

Willy1992 said:
You dont need a custom recovery for all the modules but for the last one I talk about it is esential since you use the terminal in the recovery mode to access this tool
Click to expand...
Click to collapse
Ok thanks, do you know anything about magisk beta v19??, can it be installed as an update through magisk or do you need to completley remove magisk??, the new version no longer uses an image, its all mounted in data.

boe323 said:
Ok thanks, do you know anything about magisk beta v19??, can it be installed as an update through magisk or do you need to completley remove magisk??, the new version no longer uses an image, its all mounted in data.
Click to expand...
Click to collapse
I just heard of it today, it doesnt seem like you can install it from the magisk manager app (at least with the stable channel selected) as it doesnt show that there is an update but ill try to search for some more info in the future since in my opinion it may be early to install the update and magisk 18.1 works perfectly for me

Willy1992 said:
I just heard of it today, it doesnt seem like you can install it from the magisk manager app (at least with the stable channel selected) as it doesnt show that there is an update but ill try to search for some more info in the future since in my opinion it may be early to install the update and magisk 18.1 works perfectly for me
Click to expand...
Click to collapse
I think you need to change channels unless you have to go to the main site, i cant find anything on installing over traditional magisk.

I haven't rooted yet so haven't had a chance to check this but does anyone know if the ambient display gestures module work for a2 lite?

kingd421 said:
I haven't rooted yet so haven't had a chance to check this but does anyone know if the ambient display gestures module work for a2 lite?
Click to expand...
Click to collapse
I tested different ones in the past and none of them worked.

thorin0815 said:
I tested different ones in the past and none of them worked.
Click to expand...
Click to collapse
only one that works is AODEnabler, the version that installs it to product overlay, no gestures though, but it links into the phone always on display and all the animation is there between notifications, live wallpaper also works while showing the always on display.

I'm using the following modules:
- Advanced Charging Controller (acc)
- Busybox for Android NDK
- Daily Job Scheduler (djs) *it comes w/ acc*
- Universal GMS Doze
- ViPER4Android FX
- Youtube Vanced
Other note-worthy modules that I've used before:
- Energized Protection
- CloudflareDNS4Magisk
- CloudflareDNS4Magisk IPv6

elvinguitar said:
I'm using the following modules:
- Advanced Charging Controller (acc)
- Busybox for Android NDK
- Daily Job Scheduler (djs) *it comes w/ acc*
- Universal GMS Doze
- ViPER4Android FX
- Youtube Vanced
Other note-worthy modules that I've used before:
- Energized Protection
- CloudflareDNS4Magisk
- CloudflareDNS4Magisk IPv6
Click to expand...
Click to collapse
For some reason Busybox module breaks my data connection. If installed the mobile data is disconnected.

gkornaks said:
For some reason Busybox module breaks my data connection. If installed the mobile data is disconnected.
Click to expand...
Click to collapse
I didn't encounter that kind of issue.

My Magisk modules
- Busybox
- Systemless TZData
- F-Droid extension
- Debloater (v17 doesn't work with magisk 18)
- Riru/EdXposed
- mm
I use debloater so that services like Google Maps can be made non-system (possible to restrict) and to hide the launcher (Oreo recents).
I have EdXposed for no Google play games (stop annoying nag every time I start a game).
Mm let's me recover from magisk modules that boot loop. Boot into twrp and modules can be disabled.

I think Pix3lify (gives you them beautiful rounded corners and Pixel Blue accent colors) and QuickSwitch (lets you change your default launcher without breaking the recents, install Lawnchair v2 or OnePlus Launcher port by paphonb after that) are the must install modules on this device.

marstonpear said:
I think Pix3lify (gives you them beautiful rounded corners and Pixel Blue accent colors) and QuickSwitch (lets you change your default launcher without breaking the recents, install Lawnchair v2 or OnePlus Launcher port by paphonb after that) are the must install modules on this device.
Click to expand...
Click to collapse
Could you please give a link for the one plus launcher? I simply can't find it. Thanks in advance

hncdesilva said:
Could you please give a link for the one plus launcher? I simply can't find it. Thanks in advance
Click to expand...
Click to collapse
Here's the complete guide (link in guide): https://www.xda-developers.com/oneplus-launcher-recent-apps-interface-android-pie/

marstonpear
Click to expand...
Click to collapse
Txatxiquesi
Click to expand...
Click to collapse
Willy1992
Click to expand...
Click to collapse
at1291762
Click to expand...
Click to collapse
Will u guys mind very much adding links for d various modules u mentioned?
Thanks.

Magisk Module to Change QS Pulldown back to 9 Tiles

For stock only. This is built-into my clock mods and ADB bases.
Android 12
Uploaded 2-13-22
February update
9tiles.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
------------------------------------------------------
Android 11
Uploaded 7-1-21
Stock
9tiles.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Active Edge Sense
9tilesedge.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
-------------------------------------------------
If I helped, hit the Thanks Button!
Feeling generous, send me a beer!
--------------------------------------------------

I don't understand which of those to use. Do they do more than just change to 9 quick-settings tiles?
How is it related to active-edge?

AndroidDeveloperLB said:
I don't understand which of those to use. Do they do more than just change to 9 quick-settings tiles?
How is it related to active-edge?
Click to expand...
Click to collapse
If you are using Active Edge module/app you will need to delete the Active Edge module and flash this in it's place. It's ported from the Active Edge SystemUI and has both mods. The op of Active Edge gave me permission to do this.
Edit: op has been updated to explain differences.

Will the active edge mod require an update after every monthly security update? Thanks
Sent from my Pixel 4 XL using Tapatalk

Hey is this the same mod you posted in the status bar icon notification max 7 mod with 9 tiles or is this another mod?

Nice, but also curious to see what it looks like in landscape with the music player being there. ?

Tulsadiver said:
If you are using Active Edge module/app you will need to delete the Active Edge module and flash this in it's place. It's ported from the Active Edge SystemUI and has both mods. The op of Active Edge gave me permission to do this.
Edit: op has been updated to explain differences.
Click to expand...
Click to collapse
Sadly Active Edge doesn't work for me even without this one...
If this is a module too, how about publishing it on the Magisk modules list?

Zilla0617 said:
Will the active edge mod require an update after every monthly security update? Thanks
Sent from my Pixel 4 XL using Tapatalk
Click to expand...
Click to collapse
Not always, but i update them if he does.

Jiggs82 said:
Hey is this the same mod you posted in the status bar icon notification max 7 mod with 9 tiles or is this another mod?
Click to expand...
Click to collapse
This just has 9 tiles.

AndroidDeveloperLB said:
Sadly Active Edge doesn't work for me even without this one...
If this is a module too, how about publishing it on the Magisk modules list?
Click to expand...
Click to collapse
No need to. This is firmware specific.

Tulsadiver said:
No need to. This is firmware specific.
Click to expand...
Click to collapse
There are modules that are firmware specific...
According to what you wrote, this means that (suppose active edge module works) if I want to use active edge module , I actually have to remove it, and use yours instead, under "Stock Active Edge" , right?
How can I be up-to-date with it now?
Before, we had the active-edge module on Magisk, so it could get updated there.

AndroidDeveloperLB said:
There are modules that are firmware specific...
According to what you wrote, this means that (suppose active edge module works) if I want to use active edge module , I actually have to remove it, and use yours instead, under "Stock Active Edge" , right?
How can I be up-to-date with it now?
Before, we had the active-edge module on Magisk, so it could get updated there.
Click to expand...
Click to collapse
You'd have to come back here for updated modules.

Tulsadiver said:
You'd have to come back here for updated modules.
Click to expand...
Click to collapse
Too bad.
Seems that the module works, but only if the media control is hidden.

Appreciate your work, but why did you do a Magisk module? It would be much more better if you decided to do an Xposed module, because then people could use more another mods that modify this part of system without have to replace files. Xposed is much more efficient, because it doesn't replace system files, but calls.

Senliast said:
Appreciate your work, but why did you do a Magisk module? It would be much more better if you decided to do an Xposed module, because then people could use more another mods that modify this part of system without have to replace files. Xposed is much more efficient, because it doesn't replace system files, but calls.
Click to expand...
Click to collapse
This is a really strange thing to say to a guy who has Magisk modules all over this section and no Xposed modules at all anywhere. It simply appears that he makes Magisk modules and doesn't make Xposed modules. Obviously, Magisk has a huge number more users than Xposed, so the idea that Magisk would be better is definitely not true to anyone who is not an Xposed user. Efficiency is probably less important than accessibility, as a mod is useless to one who cannot use it with their setup.

Senliast said:
Appreciate your work, but why did you do a Magisk module? It would be much more better if you decided to do an Xposed module, because then people could use more another mods that modify this part of system without have to replace files. Xposed is much more efficient, because it doesn't replace system files, but calls.
Click to expand...
Click to collapse
The vast majority of devs on here specifically call out Xposed, kernels and scripts ( in that order) as voiding the right to ask for help troubleshooting issues. While the last two seem to get a pass from many folks, Xposed almost always is requested to be uninstalled before folks will dedicate any time to help with a problem. Maybe unfair but it's always explained up front. For this reason I for one and I'm sure many other users just don't get into using it. As mentioned above, magisk has a much larger use base.

@Tulsadiver Awesome mod. I installed it my 4a. I was really cautious and disabled the Magisk Props module and rebooted before installing 9tiles because I was afraid that if I didn't the install would download the SystemUIGoogle apk for the Pixel 3a which I had set in Props module Force Basic attestation to pass CTS. My question is, did I need to be this cautious? Does your 9tiles installer look only at device fingerprint to identify the model and monthly patch version, or would these spoofed props in the screenshot make your installer download the 3a system ui?
Thanks

buffal0b1ll said:
@Tulsadiver Awesome mod. I installed it my 4a. I was really cautious and disabled the Magisk Props module and rebooted before installing 9tiles because I was afraid that if I didn't the install would download the SystemUIGoogle apk for the Pixel 3a which I had set in Props module Force Basic attestation to pass CTS. My question is, did I need to be this cautious? Does your 9tiles installer look only at device fingerprint to identify the model and monthly patch version, or would these spoofed props in the screenshot make your installer download the 3a system ui?
Thanks
Click to expand...
Click to collapse
This mod just contains the files for the Pixel 4 XL though I understand your caution. I believe Active Edge's module pulls a file bases on the build prop. Mine is not so sophisticated.
Edit: I see now where you said you had the Pixel 4a. I ran a quick mod for you that is Pixel 4a specific.

Tulsadiver said:
This mod just contains the files for the Pixel 4 XL though I understand your caution. I believe Active Edge's module pulls a file bases on the build prop. Mine is not so sophisticated.
Edit: I see now where you said you had the Pixel 4a. I ran a quick mod for you that is Pixel 4a specific.
Click to expand...
Click to collapse
Thanks for the reply. So my 4a is running fine on a modded 4XL SystemUIGoogle.apk? Wow. I wonder if this is going to keep working moving forward on new monthly patches.

Tulsadiver said:
This mod just contains the files for the Pixel 4 XL though I understand your caution. I believe Active Edge's module pulls a file bases on the build prop. Mine is not so sophisticated.
Edit: I see now where you said you had the Pixel 4a. I ran a quick mod for you that is Pixel 4a specific.
Click to expand...
Click to collapse
Thanks for the 4a specific zip.
FYI this is where I found out about this mod and nowhere in the article does it even mention the 4xl. That's why I originally thought you were curling down device specific apks like Janny. https://android.gadgethacks.com/how-to/bring-back-9-tile-grid-android-11s-quick-settings-0340584/
Other Pixel 3 and 2 users might not be so lucky if they install as I was on 4a.

[A515x] SafetyNET PASS [Android 10 - 11] [Magisk]

UNIVERSAL SafetyNet FIX
(A515x Edition)
ABOUT THIS:​This is a universal fix for SafetyNet on devices with hardware attestation and unlocked bootloaders. It defeats both hardware attestation and the new SafetyNet CTS profile updates released on January 12, 2021. The only requirement is that you can pass basic attestation, which requires a valid combination of device and model names, build fingerprints, and security patch levels.
Passing basic attestation is mostly out-of-scope for this module; this module is meant to defy hardware attestation, as well as reported "basic" attestation that actually uses hardware under-the-hood. Nonetheless, it features a few basic attempts at helping pass basic attestation on some devices, especially older devices and devices running stock ROMs.
HOW DO I USE IT?​
Code:
1. Simply install the module by Magisk, reboot
2. Enable Magisk Hide and enjoy
**ITS ONLY for A51 OneUI 2.5 or 3.0
CREDITS TO:​
@kdrag0n (Original developer of this mod)
@spit85 (For his important information and experience applying it to other devices )
SafetyNET Patch A51
Its based on the stock keystore so it doesnt affect anything​

is it working One UI 2.1 refined v1.0 ?

Fatih27 said:
is it working One UI 2.1 refined v1.0 ?
Click to expand...
Click to collapse
It should be the same keystore. You can test it. If your phone doesn't boot, boot to recovery and delete the module there.

Hi, I do the steps but it keeps saying that the certification failed :/
EDIT: Solved

My sefty net passes but after that i can't access mobile setting
It says the settings has stopped

ameer419 said:
My sefty net passes but after that i can't access mobile setting
It says the settings has stopped
Click to expand...
Click to collapse
You are using a Samsung galaxy a51? Android 10 or 11?

spit85 said:
You are using a Samsung galaxy a51? Android 10 or 11?
Click to expand...
Click to collapse
Android 10

ameer419 said:
Android 10
Click to expand...
Click to collapse
That's strange. It should work on android 10. I hex patched that keystore by my self. Maybe you got another magisk module that conflicts with these one. Do you have magisk props hide module? If yes, delete that module. You don't need it with these safetynet patch. And these patch is only for stock rom or stock base roms

spit85 said:
That's strange. It should work on android 10. I hex patched that keystore by my self. Maybe you got another magisk module that conflicts with these one. Do you have magisk props hide module? If yes, delete that module. You don't need it with these safetynet patch. And these patch is only for stock rom or stock base roms
Click to expand...
Click to collapse
Yes at that time i have that module but after this problem...i unroot my device

ameer419 said:
Yes at that time i have that module but after this problem...i unroot my device
Click to expand...
Click to collapse
Then root your phone again and only instal this module. I should work. Or flash the boot image again with Odin and root it over twrp recovery

spit85 said:
Then root your phone again and only instal this module. I should work. Or flash the boot image again with Odin and root it over twrp recovery
Click to expand...
Click to collapse
Yeah i m going to root it tomorrow
Just after rooting....do i have to install thia module
Would u like to suggest me to install any other module to pass safety net

ameer419 said:
My sefty net passes but after that i can't access mobile setting
It says the settings has stopped
Click to expand...
Click to collapse
Hi, If u are in RefinedUI 2.0 its a bug but I have already fixed it, check the small updates section of the Refined thread

BlassGO said:
Hi, If u are in RefinedUI 2.0 its a bug but I have already fixed it, check the small updates section of the Refined thread
Click to expand...
Click to collapse
I m on ui2.5

ameer419 said:
I m on ui2.5
Click to expand...
Click to collapse
With RefinedUI?

BlassGO said:
With RefinedUI?
Click to expand...
Click to collapse
Bro I have not so much knowledge about thi....i don't know it's refined or not....how to check

ameer419 said:
Bro I have not so much knowledge about thi....i don't know it's refined or not....how to check
Click to expand...
Click to collapse
I guess you are on stock rom and only unlock the bootloader and rooted the phone. If you have the Samsung galaxy a51, this patch work. If you have another phone model, it's possible that's the reason your phone trips in settings

spit85 said:
I guess you are on stock rom and only unlock the bootloader and rooted the phone. If you have the Samsung galaxy a51, this patch work. If you have another phone model, it's possible that's the reason your phone trips in settings
Click to expand...
Click to collapse
Yes... i have stock rom unlocked bootloader
I will try thi today after rooting because i unroot my phone due to settings has stopped issue

Updater process ended with ERROR 1
Error installing zip file "/external_sd/SafetyNet_Patch_A515_a10-11.zip
or
Updater process ended with ERROR 123
Error installing zip file "/external_sd/SafetyNet_Patch_A515_a10-11.zip

mikola08 said:
It doesn't want to install on android 11
Click to expand...
Click to collapse

Magisk crashes when tapping from "install from storage"
Using
[ROM][A515x] RefinedUI v2.0 [OneUI3.0 - Android11]​
[ROM][A515x] RefinedUI v2.0 [OneUI3.0 - Android11]
FEATURES [ 2.0 - REMAKE ] - NDataX replaced with BlueFly (An improved version) - Mixplorer removed (Problems with Google File Manager) - Added the option to remove the Magisk App from the /system (Abnormal State) - The OMC was updated with the...
forum.xda-developers.com
A short splash screen shows up with an blue folder icon.
Any idea how to fix that?