Hello!
I manage to damage my touchscreen and i was looking for replacement part, but with no luck. I have tried few times to contact to xtrons, but i havent got any reply.
Any tips where i could find it?
What is a PF83MTVA. Is it an MTCD device. Crystal ball no working.
You might have better luck searching for the part number on the display or contacting the reseller directly.
Its a Xtron unit, car stereo. Im not sure, i think it should be MTCD device. I have seen similar post here, thats why i posted in this topic, maybe i am wrong.
Related
Hi there
I have an SX66 with a cracked digitizer/touchscreen.
The LCD is ok. I removed and replaced the battery, unit starts ok, but, of course, I cannot get by the alignment screen (makes sense).
I have a couple of questions.
First, I have an opportunity to buy another SX66 that has a cracked LCD, but there doesn't "seem" to be a crack in the touchscreen. There is a "spider's-web". Can this be on the LCD? Or I'm thinking that maybe it's on the underside of the touchscreen. Any opinions?
Is it possible to have a cracked/broken lcd and not have an affected touchscreen?
So, the touchscreen 'looks' to be ok, but is there anyway of testing this without removing it? Any opinions? Should I buy his unit and try it?
Second, there are some instructions for replacing touchscreens in an earlier thread. However, there was one comment that said that if I buy the proper touchscreen, soldering/desoldering is not required. Can anyone clarify or confirm that?
Third, is there anyway of determining which touchscreen I require by just the unit serial number? Or do I need to remove it?
I want to take this apart and fix it, but I would rather gather all the info first. Any help would be hugely appreciated!!
Thanks!
Richard
Hi Richard,
Well first off all, let me put your situation into other terms...
You have a really expensive suit jacket with a cashmere liner inside. You snag it on a nail, and now there's a big rip on it. You have the opportunity to buy another really expensive suit jacket with a good exterior, but the cashmere is ripped to shreds inside. Do you buy it and try to sew the two together?
I don't know exactly how crafty you are, but retrofitting a touch screen onto an LCD sounds like a daunting task. Buy a new OEM screen outright and fit it into your SX66. You'll have a lot less to worry about in the long run.
This might help
http://wiki.xda-developers.com/index.php?pagename=BlueangelLCD
2 borken does not make a right (not sure if who said that ;-) )
the price is right?
the cost eaven on ebay dose not justify not getting a new one so here it is im in cambridge and i need a new housing for mine so we can get one i can chang out the screen for you and split the cost is you like this idea email me thanks
Tri. City Ont.
Richard, can you help me
I need buy some partc of my SX66, can you tell me where I can buy.
Thanks a lot
Hector Ruiz
hrvc said:
I need buy some partc of my SX66, can you tell me where I can buy.
Thanks a lot
Hector Ruiz
Click to expand...
Click to collapse
try here
http://www.apexlaptops.co.uk/Blue Angel.htm
I'm from Europe and I bought touchscreen in USA at http://www.pdasmart.com/.
They have also repairing service.
Regards
Same problem
my PDA2K digitizer broken and i'm facing the same problem after upgrading my PPC to WM 2005 but as by my knoweledge their is a systematic way of pressing the buttons to get over the screen alignements? any help
Hello,
My wife recently had the misfortune to drop her newish HTC Desire A8183 on the kitchen floor, thanks to my daughter's over eager grab. The digitizer has some lovely cracks all over it now... :-(
Needless to say, my wife is dismayed, and my daughter (she's only 3 and didn't mean it) is very sorry.
I thought I'd try replacing the digitizer myself, having read many tales of repairs taking 3 weeks and costing 300+ dollars.
Bought a new digitizer, took phone apart (even had a handy little "oven" that I could set to 60 degrees to melt the glue).
Phone taken to pieces quite happily.
Put in new digitizer, reassemble.
Now start up phone, all looks good.
BUT... only a small section of the screen is responding to touch (where the 7,8,9) keys are when entering SIM PIN. The row below has also worked (although intermittently) and the emergency call button too...
So my question:
Is this a problem with the digitizer I bought? Is there a particular model number of digitizers that I should be using? I note that the old digitizer had an "I2" printed on the pcb, whereas the new one has an "E5", the old one has a sticker with SHAB1 on it whereas the new on has SHABN...
I'm not sure that this is important - but given that the thing only partly works, I think it might be.
Anyone got any ideas/hints for me to try... I'll phone the supplier tomorrow and suggest to them that the part is faulty, as I can't see any threads out there where this has happened to someone else.
EDIT: I thought I should add that the old digitizer despite looking like a spider's web, still actually works - which really make me think it is a problem with the new one...
Thanks for any help!
Chris
I can't really help you from experience all knowledge.
But I did read somewhere that you have to use specific digitizer for specific Desires.
I could be wrong
Did you work out any solution for your replacement digitizer issue?
I have a similar problem and I just realized the different ghost pattern of the screens (original has diagonal, new has square arrangements of dots) and also the electronics of the digitizer is slightly different (Original: Synaptics 940-663-1R1, replacement: Synaptics 940-682-1R2)
Hello,
I'v got the same problem, i even bought two digitizers from different sellers. I thought that it is because i did something wrong when I disassembly and assembled the phone but I put my old digitizer again and it works ok ( except the corner where it's crashed ).I asked my sellers if there are some different digitizers and they replayed that no and the one I'v got are checked and ok ( the electronics is identical, the only difference are white big number E2 and G2 ). What can I do more to repair my poor thing?
Stan
Please use the Q&A Forum for questions Thanks
Moving to Q&A
I unfortunately dropped my Desire this morning and managed to break the glass/digitizer.
Can anyone recommend a repairer preferably in the north East, UK.
I have seen replacement digitizers already fitted into the front housing for £19.99 on a well known auction site.
Looking at videos on how to replace the digitizer it doesn't look too difficult just looks intricate and unsure if i should have a go at replacing or just take it to a local repairer.
What's everyone's opinions?
Thanks
In the past I've found buying the digitizer and then getting a shop to fit it best for me
Sent from my HTC Desire using xda premium
i did it last week, not bad for a copy digitizer.
little fiddly but if u take your time and be careful, you should be fine
there is a photo show on youtube somewhere, gives u a better breakdown.
ayu452.blogspot.com/2011/11/htc-desireg7-screen-replacement.html
found this even better than the one i saw originally...
its a video
youtube.com/watch?v=sXZqIjtFoAU&feature=related
I did exactly the same a few months ago and took the route of buying a replacement and fitting myself.
I have to be honest there were a few moments when I thought that was a mistake and I should have taken it to a shop. I found it VERY fiddly and was convinced i was going to break it, the insides are really delicate.
If you decide to do it, get as many instructions from google, youtube as you can and read/watch them all before starting. I seem to remember the ones I followed ware unclear at a certain stage. The ones from ayu452 look good tho. Have the right tools and allow plenty of time. Good Luck.
Just wondering if its worth buying this to avoid removing the digitizer from fascia?
http://www.ebay.co.uk/itm/220871890...X:IT&_trksid=p3984.m1423.l2649#ht_1674wt_1037
Whats peoples opinions on it?
Yeah may as well. Will make it easier. I may even do that just to get rid of scratches on digitizer and fascia
Ive ordered that digitizer with fascia off above auction website link
A local phone repair guy said he would fit it for £20 just gotta decide if i should let him fit it then if he messes up its his responsibility ??
That was my reason behind doing that. Still much cheaper than if you asked HTC to do it.
Digitizer arrived next day in post.
Looks good quality with black surround rather than that bronze colour. Like it
Took it to my local phone repair guy who fitted it.
Hit power button phone booted up, one BIG problem.. the digitizer wasnt working!
He checked all connections again and concluded the digitizer was DOA.
Not good and still without my phone.
Have let the phone guy order a digitizer himself as im going to have to return faulty one for refund.
Hopefully it should be sorted today.
Good luck.
New digitizer fitted and working perfect!
Credit to Paul ThePhoneGuy repairer in Durham who sorted it for me.
Just realised I need a new speaker now. It must have damaged it when it was dropped.
Thats a minor job though. Just pleased phone is working again.
Good news!
rootSU said:
Good news!
Click to expand...
Click to collapse
Yeah. Just pleased to have it back working again.
Hi, so, just spent 10 minutes trying to figure out how to post on this site. (Although having posted before -_-)
Anyway, I recently got ahold of a BlackPhone 2, a phone that for some reason has a high value, but low interest. The problem it has is related to the speaker, the loudspeaker sounds muffled as if it had drowned in water. I looked online and couldn't find a replacement anywhere, there were hardly any videos of disassembling the phone nor any threads with pictures. So once the phone came to me (bought through eBay) I couldn't help but think it was Xperia inspired. The shape, materials, etc... With no help from the internet, I decided to disassemble the phone myself, it was easy, exactly like an Xperia...
Now I've found the speaker, exactly like an Xperia.... it's basically a small rectangular component with two pins sticking out on one side, they make contact with the smaller board on the bottom of the phone. I couldn't find a replacement part for this online, so I'm now wondering whether or not I could use another speaker with two pins in the same location? Such as an Xperia replacement part?
Thanks for any replies!
Hi,
I tried upgrading my PX3 chip to PX5 and in the process of disassembling the device I noticed the touch screen digitizer connector was not completely intact and I couldn't put it back in one piece. Now my chip is upgraded and I can hear the radio when I start my car but all I'm seeing is a black screen.
Is there anyplace I can buy a replacement for the whole screen (8 inch)? I searched some old threads and came across some links to Aliexpress selling exactly what I need but they weren't working anymore and I couldn't find any sellers right now, or more likely just didn't know where to look.
Any help would be most appreciated, would hate to have spent $90 on the new chip and then have to buy a new head unit to replace the whole damn thing just because one screen connector is broken.
Have you thought about contacting the reseller for spare parts (aftersales service)?