Question Galaxy A72 scratches due to Samsung case - Samsung Galaxy A72 4G

Hello everyone, has anyone else noticed in Galaxy A72 and Galaxy A52 that the Official Samsung cases are leaving marks and scratches on the plastic surrounding of the phone? My A72 phone looks like full of scratches and a friend has the same issue with his A52. Talking to Samsung Greece and they won't believe me saying i made the scratches myself.... Same answer to my friend. Can anyone help me in what could i do to be heard from the company?

Keep inside of case clean and free of debris.
Use some fine 600 grit wet/dry sandpaper to smooth inside of case if needed.
Stretching some teflon tape around the phone's edge will help.
Use another case.
Most untreated hard plastics are relatively soft and prone to scratches... of course Samsung isn't responsible unless it arrived like that... never mind Samsung's poor material choices

blackhawk said:
Keep inside of case clean and free of debris.
Use some fine 600 grit wet/dry sandpaper to smooth inside of case if needed.
Stretching some teflon tape around the phone's edge will help.
Use another case.
Most untreated hard plastics are relatively soft and prone to scratches... of course Samsung isn't responsible unless it arrived like that... never mind Samsung's poor material choices
Click to expand...
Click to collapse
I agree with the poor material of Samsung phones.... Makes me think to sell everything and switch to iphone instead of trying to fix samsung cases The support is the worst ever they won't even believe me

nick1908 said:
I agree with the poor material of Samsung phones.... Makes me think to sell everything and switch to iphone instead of trying to fix samsung cases The support is the worst ever they won't even believe me
Click to expand...
Click to collapse
If you used any phone in a case and paid attention this should be common knowledge by now. Even on the N10+ frame rail scratches can happen on the anodized aluminum.
Frequent cleaning of the inside of the case and keeping the phone clean in general helps.
I leave the protective factory film on the side rails until it falls off because of this.
You could use something like mylar wire marking tape to protect it

blackhawk said:
If you used any phone in a case and paid attention this should be common knowledge by now. Even on the N10+ frame rail scratches can happen on the anodized aluminum.
Frequent cleaning of the inside of the case and keeping the phone clean in general helps.
I leave the protective factory film on the side rails until it falls off because of this.
You could use something like mylar wire marking tape to protect it
Click to expand...
Click to collapse
I was using cases in other phones and never had that. Always took care of my phones and cases.... Are we using a case for beauty or in order NOT to have scratches? This happens due to 2 things , low quality of material and low quality of the cases...

You use a case to protect the phone from a 2-4 foot drop onto concrete.
Take what you have learned and move forward...

Related

Galaxy S3 Dust Problem?

Hey Guys and Girls,
I just got my Galaxy S III a month ago and I am developing a problem I can't seem to figure out. On the edges of the phone, where the glass meets the blue plastic I am getting a build up of dirt. I keep my hands very clean as I am super OCD about my devices. With that being said, I am getting dirt and "grime" build up in the sides. Sometimes it's hard to notice but it becomes clearer as more days go on. I have contacted Samsung and they were unwilling to decide what it was without seeing it. I contacted my carrier who sent me a replacement after ten or more calls. The new device seems to suffer the same fate. I am wondering if anyone else is having this problem or knows how to get rid of it. I tried to clean it with an air canister with no luck and plenty of sharp objects. None which would do a great job, the only thing that came close was a toothbrush and that was difficult to say the least. Is this a known problem or am I getting more defective devices. Thanks for your input.
P.S- I know the photo isn't great and I will take more to show the effects. It is most noticeable in the corners, the sides, and around the speaker and home button.
Appreciate the help!
I don't have any issues and I have the white one, so it should be more obvious.
Sent from my SAMSUNG-SGH-I747 using xda premium
I had some lint build up in mine before I got a case (free zoogue deal) that covers the gap. I just used the corner of a folded piece of paper to clean it out a few times. Personally, I consider that gap to be a design flaw, particularly considering that the gap is not uniform on all sides...
annulation said:
I had some lint build up in mine before I got a case (free zoogue deal) that covers the gap. I just used the corner of a folded piece of paper to clean it out a few times. Personally, I consider that gap to be a design flaw, particularly considering that the gap is not uniform on all sides...
Click to expand...
Click to collapse
I will try the paper trick, pretty much the only thing I didn't use. I find the gap to be a flaw as well considering that over time it is only bound to get worse. I have found that some spots are wider than others. Not sure why they would create a design like this but glad to see I am not the only one. I thought I was being OCD for awhile.
chaoticfury said:
I will try the paper trick, pretty much the only thing I didn't use. I find the gap to be a flaw as well considering that over time it is only bound to get worse. I have found that some spots are wider than others. Not sure why they would create a design like this but glad to see I am not the only one. I thought I was being OCD for awhile.
Click to expand...
Click to collapse
The gap isn't a design flaw: it's actually the seam between the front and back of the phone, and it's where you slip a spudger (flat plastic knife) in order to pry it apart (after rear screws are removed) for repair.
Just put a case on it -- any case will do -- and then it's virtually a non-issue. If you don't want to use case then just live with having to clean out the gunk build-up every couple months.
(And, frankly, it's kinda lame that you *****ed about this "problem" over 10 phonecalls and then they finally gave you a replacement phone to make you go away and stop costing them money)
Before I had a case I didn't have this issue. The gap isn't very noticeable. I have a Diztronic TPU case now ($10 Amazon) and it has a small lip which covers that gap. Maybe you have dirty pockets or a batch of phones that just had a slightly larger gap.
zmore said:
The gap isn't a design flaw: it's actually the seam between the front and back of the phone, and it's where you slip a spudger (flat plastic knife) in order to pry it apart (after rear screws are removed) for repair.
Just put a case on it -- any case will do -- and then it's virtually a non-issue. If you don't want to use case then just live with having to clean out the gunk build-up every couple months.
(And, frankly, it's kinda lame that you *****ed about this "problem" over 10 phonecalls and then they finally gave you a replacement phone to make you go away and stop costing them money)
Click to expand...
Click to collapse
You are entitled to your opinion about how lame or not lame it was for me to call, but the truth of the matter is I have owned a multitude of phones in my lifetime, none which had a problem like this at all. I am not sure if you are in Canada, but a three year term for a phone that constantly needs maintenance for removing dust does not seem like a premium device in my book. Not to mention the fact that if it finds it's way under the screen as you suggest, then it would only cause future problems, outside of the one year warranty, rendering me with an inoperable phone. So I can't say I agree with your analysis of my calls. Not to mention it costs them a negligible amount to speak with me on the phone.
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.
chaoticfury said:
You are entitled to your opinion about how lame or not lame it was for me to call, but the truth of the matter is I have owned a multitude of phones in my lifetime, none which had a problem like this at all. I am not sure if you are in Canada, but a three year term for a phone that constantly needs maintenance for removing dust does not seem like a premium device in my book. Not to mention the fact that if it finds it's way under the screen as you suggest, then it would only cause future problems, outside of the one year warranty, rendering me with an inoperable phone. So I can't say I agree with your analysis of my calls. Not to mention it costs them a negligible amount to speak with me on the phone.
Click to expand...
Click to collapse
It can't get behind the screen because it's one piece, so don't worry about that.
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.
Click to expand...
Click to collapse
Yeah, many of the hard polycarb cases -- like Samsung's mesh case, or the popular Rock Quicksand -- that offer little edge protection don't cover the the entire lip because they can't. All TPU and hybrid cases do, though.
chaoticfury said:
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.
Click to expand...
Click to collapse
Most TPU cases have a lip which wraps around the front. It's not a hard plastic case that tries to snap into place. I have the Diztronic case and the lip is definitely there and it definitely covers the gap you're referring to. I had a TPU case for my GSII and it's the same basic design. If you don't want a case then you'll have to put up with the dirt in the crevices or get a different phone.
AngelsNecropolis said:
Most TPU cases have a lip which wraps around the front. It's not a hard plastic case that tries to snap into place. I have the Diztronic case and the lip is definitely there and it definitely covers the gap you're referring to. I had a TPU case for my GSII and it's the same basic design. If you don't want a case then you'll have to put up with the dirt in the crevices or get a different phone.
Click to expand...
Click to collapse
Thanks Angels,
I will have a look at the cases as you suggest and try to find one that I like. I would hate to give up this phone as I very much enjoy it and don't see any other phones that interest me at the present moment.
chaoticfury said:
Thanks Angels,
I will have a look at the cases as you suggest and try to find one that I like. I would hate to give up this phone as I very much enjoy it and don't see any other phones that interest me at the present moment.
Click to expand...
Click to collapse
Np. I use this case. http://www.amazon.com/Diztronic-Fle...54&sr=8-7&keywords=diztronic+galaxy+s+III+tpu The matte feel is nice and it comes with a screen protector which I applied and it's good quality as well. It doesn't attract as much finger prints as other screen protectors I've used and it's very clear.
Off Topic:
But... even with a TPU case you'll have to be careful of drops. Gorilla Glass isn't as strong as it's touted to be against sudden impacts (watch iPhone5 vs Samsung Galaxy S III drop test). My GSII got a small scratch prior to applying a protector and just today a coworker dropped her GSII on concrete and the TPU case didn't stop the screen from severely cracking. It will protect from a lot of surface scratches though. My mom just got her first smart phone (a Pantech) and dropped it and it slid across the floor. I hadn't gotten her screen protector yet and her screen has some small scratches and nicks.
I guess my point is even if it reduces the aesthetics get a case, a screen protector, and be careful still.
I ordered that case like you suggested but it has yet to arrive. The replacement phone I got from my carrier is having even worse problems than my first one. I was even more careful with this than the others. Not really sure what to do. I am intrigued by the fact that I see nobody who has a white GS3 post problems about it. I wonder if the blue is the only one with these kind of issues.
I've got a blue one and don't have that problem
Galaxy SIII via XDA premium
This thread on tight fitting cases might be helpful.
I have. White phone no such issues I also noticed the white button sticks out a bit more.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I had a blue one and had the same problem. The dust was noticeable around the edge and around the speaker. I ended up exchanging it because the home button died. All they had in stock was white so I took it. I have to say, the white one has much less of a seam and there is no noticeable dust build up!
Sent from my SGH-I747M using Tapatalk 2
cboone said:
I had a blue one and had the same problem. The dust was noticeable around the edge and around the speaker. I ended up exchanging it because the home button died. All they had in stock was white so I took it. I have to say, the white one has much less of a seam and there is no noticeable dust build up!
Sent from my SGH-I747M using Tapatalk 2
Click to expand...
Click to collapse
Going to see if I can get a white. I prefer blue but I hate this problem.
Mine collects dust too and I use a Rock case. I'd clean it if I could, but I can't seem to fit paper or anything in to push it out either. It's hardly visible, not putting too much thought in to it.

HTC One - bare / naked / without case

Are there any case haterz on this forum, who run their phones without any kind of cases / back stickers etc ?
Could you post some photos, facts, knowledge how well the phone stands everyday usage ?
I have been using case since day one, but i just can't stand it anymore. Did I buy alluminium phone to put it in rubber case or stick plastic sheet of foil on it to lose the feeling of alluminium ? No !
I drop my phone very rarely, actually i have never droppped it (knock knock), only time it hit ground it was clumsy bird's (jokin clumsy friend's hands) fault. My only concern is lens protector. On one side its nicely hidden in the rim, but at the other lens cover is protruding just a very litle bit. I am attaching picture to illustrate it a bit. It is side look.
There's a "hole" in the phone body, so the lens should be all hidden / drown and there should be 1 milimeter gap, when i place phone on table. On one side there is, on other lens is in line with body.
Grey - phone
White - gap for lens cover
Black - lens cover
Mods, please do not delete this topic - this has already happened in past (moved to accesories thread), but it get lost very easily, i try to debate with users without accesories.
Thanks
i did for apprx 4 months when i first bought the device, now i'm using crystal clear case to not to hide devices body.
i bought a case after i saw scratches on camera lens, luckly camera lens got replaced after service for red tint.
also shiny exposed alumium around the device got scratched and deformed a bit.
I also am not a fan of big bulky cases. One of the main reasons I bought this phone is because it is so damn beautiful (compared to most other phones). I've always joked about how iPhone fans typically rave about how "sleek" and "thin" their phones are, yet they walk around with them wearing the equivalent of a down-filled parka that is anything but "sleek".
I did compromise a bit, just because I want to keep my phone looking nice. I found the Cimo clear case. It is very thin, and very clear. It has just enough of a "lip" around the edge so that the screen of the phone won't contact the ground when it is lying down (or dropped on its face). The soft rubbery cushioning should also protect against dings on the corners and back, as well as prevent scratches. All without sacrificing the beauty of the phone. I paid $10 on Amazon for it.
NEH,
I did not buy a unibody aluminium finish phone to hide it behind chinese plastic covers. Thats not my style. I have pretty much the same type of use like yours. The only thing that has happened with me is that the beats audio red sticker at the behind bottom plate is now fading off. Nothing else. Just keep keys/card holder and coins in other pocket. I dont think you need a plastic cover.
When I had my One I used the HTC hard shell - minimal design but clear so you could still see the phone. Best case I had IMO
http://shop.emea.htc.com/uk/p_htc_store_product.aspx?i=251537
Whether you can still get it is another question
I've been using this case works well still shows the phones great looks and protect it all around.
HTC One
Guys, thanks for all the replies.
But this thread is strictly about naked devices - no cases at all !
well ii put a case on it.... next time its still usable years down the road
Mine has had nothing on it except a transparent skin on the back since i bought it last May. Still looks great...
Yeah I've been running mines nekkid since I got it last April, just couldn't bring myself to spend money to cover such a good looking device. Other than some wear marks around the shiny beveled edge, there's no obvious signs of age.
I'm not rough on it, but I don't baby it either. I have dropped it a few times(on purpose, just to show people how durable it is), and run my knife across the screen and back, but no damage.
Sent from space...
jaqual said:
Yeah I've been running mines nekkid since I got it last April, just couldn't bring myself to spend money to cover such a good looking device. Other than some wear marks around the shiny beveled edge, there's no obvious signs of age.
I'm not rough on it, but I don't baby it either. I have dropped it a few times(on purpose, just to show people how durable it is), and run my knife across the screen and back, but no damage.
Sent from space...
Click to expand...
Click to collapse
And what about lens cover ? Is yout lens completely hidden, or do you have it like me ? Hidden on one side, flush with body on the other.
Do you use any kind of pouch or something ?
never ever use a case defeats point of having such a wonderful design,have a leather pouch when not in us and just treat it like a baby when in use 6 months on still pristine not a mark
Sent from my Transformer TF101 using XDA Premium 4 mobile app
remusator said:
And what about lens cover ? Is yout lens completely hidden, or do you have it like me ? Hidden on one side, flush with body on the other.
Do you use any kind of pouch or something ?
Click to expand...
Click to collapse
My lens cover is slightly recessed, so no, not like you, but haven't had any damage to it. No pouch or anything, just keep it in my pocket with my change.
Sent from space...
No case.
I am careful when I lay it down on certain surfaces.
And I try *very* hard never to let it slip out of my hands and fall.
No damage due to general wear. I dented the back slightly and roughed up one corner slightly.
Totally worth it. Love the feel and thinness of the phone.
[1] said:
Mine has had nothing on it except a transparent skin on the back since i bought it last May. Still looks great...
Click to expand...
Click to collapse
this is how i use mine. transparent cover over the back which i only put on because the aluminum is actually very slippery for me and the clear skin provides better grip so i dont drop it. clear cover over the screen and im good to go. few small areas around the front bevel where the blue has worn away but other than that its prefect. i never use a case, defeats the purpose of having a thin phone.
I Have been using it without cover, but in December it has fallen on the road so i ordered some cheap one from the e-bay.
So now, i am using it with cover, but i lost that great metal feeling of the phone.
Here is an example with and without cover
http://i.cubeupload.com/KydqLb.jpg
I don't use a case at all makes it easier to use the volume and power button
Sent from my Verizon HTC One using Tapatalk
I use no covers, just matte screen protector (I like the way my display looks with it). Bought it in June 2013. It fell on the floor several times, it got only one scratch on the top (on the lright corner), but it still looks amazing! As it's always in my pocket, lately the "beats audio" logo on the back is going away slowly... but i use nothing to protect it
NxNW said:
No case.
I am careful when I lay it down on certain surfaces.
And I try *very* hard never to let it slip out of my hands and fall.
No damage due to general wear. I dented the back slightly and roughed up one corner slightly.
Totally worth it. Love the feel and thinness of the phone.
Click to expand...
Click to collapse
+1. Dont know how long I would keep the phone. But while I have it might as well enjoy the quality feel of it.
My HTC One is about two weeks old. I love it so much, I can't bring myself to cover this baby up.
Also, I am paying for a warranty, so if anything happens to it I'll get a new one, or maybe the M8 if they run out =D

Bezels scratches easily

I've had my note 4 for the past 3 days or so, and I keep my phones very well, I just noticed bezels are scratched..and it's been in my hands or on my bed 90% of the time. The iPhone 5 and 5s have had the same issue but not as bad as this.
Any have any recommendations on what should I do? I was going to buy a Spigen case but the reviews where horrible and read the clear case they have scratch up users phones.
What color?
Yeah I noticed mine have very fine lines on it.
Android The Greek said:
What color?
Click to expand...
Click to collapse
Black model, might get the white.
Allen` said:
I've had my note 4 for the past 3 days or so, and I keep my phones very well, I just noticed bezels are scratched..and it's been in my hands or on my bed 90% of the time. The iPhone 5 and 5s have had the same issue but not as bad as this.
Any have any recommendations on what should I do? I was going to buy a Spigen case but the reviews where horrible and read the clear case they have scratch up users phones.
Click to expand...
Click to collapse
Spigen cases are awful imo. I have no idea in the world how they got so popular. Most of their cases look good and that's where it ends. They often have fitment issues, they make phones wider than they need to be, they are made pretty cheaply and have a hefty price tag.
I'm just glad that people are starting to wake up. If you look up their Note 4 cases and some newer phones on Amazon, they have very unfavorable reviews.
I recommend you purchasing the pelican voyager case for 60$ on AT&T or Amazon.com. I have it and It is the best case I ever used. I also purchased the otterbox defender case but I don't like it because it's to bulky. I prefer the pelican because of the size and durability it offers. The military and fire dept use this material for all there things
I ordered the Neo Hybrid, Paid 20$ should arrive today in the morning.
I have the black model and I am extremely anal about how I handle my phone. I never put anything in my pocket with it and I even dust out the lint periodically from my pocket. I've noticed a few light scuff like marks on the bottom corners of the chamfered edges. Nothing to lose your head over, but I've only had the thing for less than 2 weeks so I'm kind of worried what it will look like in a year despite my ultra careful handling.
I haven't scratch mine so far but if that ever happens I plan to sand the bezel and polish it to a shine.
Allen` said:
I've had my note 4 for the past 3 days or so, and I keep my phones very well, I just noticed bezels are scratched..and it's been in my hands or on my bed 90% of the time. The iPhone 5 and 5s have had the same issue but not as bad as this.
Any have any recommendations on what should I do? I was going to buy a Spigen case but the reviews where horrible and read the clear case they have scratch up users phones.
Click to expand...
Click to collapse
At the risk of appearing the fool, I thought I'd still chime in and ask the obvious...did you guys peel the very thin plastic that goes all the way around the phone? I really only mention it cuz I had the same thing happen to me the first day and was in disbelief that I had somehow damaged the edges. Then I noticed the gouges were actually in the very thin plastic I hadn't seen was still on the bezel. I know it's probably not the issue you all are having but figured I check just in case.
I'm using a Spigen Capsule tpu case and it works fine for me
brittoking said:
At the risk of appearing the fool, I thought I'd still chime in and ask the obvious...did you guys peel the very thin plastic that goes all the way around the phone? I really only mention it cuz I had the same thing happen to me the first day and was in disbelief that I had somehow damaged the edges. Then I noticed the gouges were actually in the very thin plastic I hadn't seen was still on the bezel. I know it's probably not the issue you all are having but figured I check just in case.
Click to expand...
Click to collapse
Yes, i peeled it the first day I got it. I returned the phone today, just ordered my Note 4 in white from Amazon. Arriving on friday, can't wait to use it with my Spigen Neo Hybrid that arrived today.
Yeah i have the spigen capsule case and it puts marks on the shiny metal part of the bezels from taking it off and on. I'm pretty anal about my phones for resale value because i can never stick with one phone but oh well what did you expect it's a really soft metal. We the users asked for aluminum because of the "premium feel". I don't really care it's a phone. I'm more worried about performance and battery life
mariosrx7 said:
I recommend you purchasing the pelican voyager case for 60$ on AT&T or Amazon.com. I have it and It is the best case I ever used. I also purchased the otterbox defender case but I don't like it because it's to bulky. I prefer the pelican because of the size and durability it offers. The military and fire dept use this material for all there things
Click to expand...
Click to collapse
The Voyager looks nice, but I don't want to be raped by AT&T once again. Nothing from AT&T is priced reasonable. especially if they have an exclusive (according to the Pelican site, AT&T has exclusive on them, and I do not find them on Amazon).
I have to join in to the post because its really weird that these aluminium sides are easy to scratch in a phone for this price even when you use I case maybe it will prevent the phone from scratches but when removing or applying the case you can leave some marks or scratches on these silver sides. I hate this that samsung didn't really think this through when build something incredible but if just that the frame could me made from a different material and it doesn't have to be shiny but Samsung always gets something wrong that how this industry works even Iphone is not perfect.
eXplosion17 said:
I have to join in to the post because its really weird that these aluminium sides are easy to scratch in a phone for this price even when you use I case maybe it will prevent the phone from scratches but when removing or applying the case you can leave some marks or scratches on these silver sides. I hate this that samsung didn't really think this through when build something incredible but if just that the frame could me made from a different material and it doesn't have to be shiny but Samsung always gets something wrong that how this industry works even Iphone is not perfect.
Click to expand...
Click to collapse
Aluminum is a soft metal the fact that it scratches is not surprising at all. They thought it through just fine what do you think they should have made it out of? Some magical material? Or perhaps you would prefer they made it out titanium which would quadruple the price. Its about tradeoffs and since every manufacturer has a hard on for metal phones for the masses your going to be stuck with aluminum.
The case is not scratching the metal, it is physically impossible for the plastic to do so. Its the debris that is rubbing up against in between the case and the phone.
Note 4 is still a beautifully made device... even with the scuffs. Solid too.
Somewhere I saw (pocketnow?) I high grit sand paper gently applied will remove the scuffs. I have a nasty one on the top left corner from a fall My fault though because I don't use a case.

Samsung G20 S is an amazing phone and more delicate than eggs

I decided to switch carriers and try a new smart phone and went with Tmobile and a Galaxy 20S. I was surprised on how slim and light the phone is upon picking it up. The retail store did not have any cases I liked so I ordered a case off Amazon and decided to not take my phone out of the house until I had a case for it. Well......
I had my phone for about 4 days using it in the house. My phone was sitting on the arm rest of my couch and slid off , dropped and landed on the laminate floor. A fall of less than 20". The rear glass cover is cracked on opposite corner edges.
My phone and camera work fine but I am simply amazed at how fragile the 20S is or maybe its just my 20S. I have no idea if its a factory defect and I have never seen anything like it. Its really more fragile than an egg. If the phone is this delicate it should come WITH some type of case or more durable gorilla glass. I am 57 years old and owned several brands of smart phones ( coming from an LG V30) and I have never dropped or broken a phone before in my life. Be aware my cracked 20S could be a fluke or a sign of a bigger issue. Now I need to find a place to replace mt rear cover.
The Galaxy 20 S needs a GOOD case so be advised if you have one be darn careful with it. The quality of the phone ( use) is excellent , its the durability issue that makes me concerned. If a laminate floor cracked the rear glass a drop on concrete will likely kill the phone. Pretty sad for a device that costs a grand or more.
Depends on which angle your phone falls, it is just glass. Gorilla glass is anti scratch but not anti crack.
Also the phone comes with a case, it's in the box and I will recommend you use it while waiting for the better one you ordered on Amazon to arrive.
Glass is glass and glass will break.
Sent from my SM-G985F using Tapatalk
vash_h said:
Depends on which angle your phone falls, it is just glass. Gorilla glass is anti scratch but not anti crack.
Also the phone comes with a case, it's in the box and I will recommend you use it while waiting for the better one you ordered on Amazon to arrive.
Glass is glass and glass will break.
Sent from my SM-G985F using Tapatalk
Click to expand...
Click to collapse
It needs a "fragile" logo embossed on it................
Rear screen and replacement from a Samsung authorized repair center is $109.17 / FYI
cal50 said:
It needs a "fragile" logo embossed on it................
Click to expand...
Click to collapse
Just got to be careful of where you put and how you handle it.
I haven't dropped or broken a phone or misplaced one in 12 years.
Mainly because i see the item as $$$ and to get $$$ took me months of hard work.
It's WAY more break prone than other phones.
Watch and wait . Great phone for function and features, build durability is iffy at best,IMHO.
If you spend over a thousand dollars for a phone in this day and age a good case is mandatory. Otherwise you are just playing Russian Roulette and sooner or later it's gonna fall on the floor. I love the OtterBox cases. I had the commuter for many years for the S7 edge and Note 8. When I got the Ultra 512 gb I want with the Defender Pro and glad I did. First day I got the phone it was knocked off the kitchen table at work and landed on a concrete floor. Not even a scratch. So you can either wait for your beautiful caseless phone to shatter when you have an oooops moment or you can invest in a top quality case.
Everyone, well most of us, have heard the expression you cannot have your cake and eat it too!
This applies well to our beloved smart phones.
You can have something durable in its creaky, plasticky, feels like a piece of s4!+ design and all (Blackberry anyone?) that can be kicked, tossed, dropped, etc. Doesn't need a case at all.
Or the latest designs that are thin, glass on front and back with metal trim that feel like quality in hand with no squeaks or twists when handled. But if you drop them without a case you will regret it! Even if the glass doesn't chip or break there will be nicks/scratches in the bezel/frame that gets the best of the OCD types.
So now we have cases that are essentially mandatory to everyone that has to carry their devices around. The best cases combine looks/feel while offering adequate protection and then some are purely based on protective qualities alone that make our phones feel like bricks!
I do like thin cases like Pitaka but also will use something with a bit more protection if I'm running around outdoors or up in the air (tower/ladder/tree) etc. I used to use a rigid holster that would fit a specific case but gave up on those due to having to buy so many. And they didn't actually protect the screen as well as you'd think. I use a pouch now with a clip for belt and has a loop that my Grip6 belt can pass through making it utterly impossible to lose the pouch with phone safely inside.
The only thing I haven't figured out is how to make a case puppy teeth proof!
Irony :
Designing something for great looks and feel.
Has to be put in a case that wipes out the looks and feel.
Don't get me wrong, I do love the phone but it really is delicate. Sometimes adding thicker glass or raised impact frame is better for function and longevity.
This is the 1st smart phone I have damaged from a very minimal drop. The plus version I think has a raised camera module that takes a beating from setting it down on a flat surface. I almost selected that one for the bigger battery and glad I got the S20. The S20 will be a money maker for repair shops.
cal50 said:
Irony :
Designing something for great looks and feel.
Has to be put in a case that wipes out the looks and feel.
Don't get me wrong, I do love the phone but it really is delicate. Sometimes adding thicker glass or raised impact frame is better for function and longevity.
This is the 1st smart phone I have damaged from a very minimal drop. The plus version I think has a raised camera module that takes a beating from setting it down on a flat surface. I almost selected that one for the bigger battery and glad I got the S20. The S20 will be a money maker for repair shops.
Click to expand...
Click to collapse
The Ultra has a raised camera lens too, but the silcone case im using is just right enough to make it flush so theres no problem with putting it down for me.
Damage the front glass, display or camera module and a $109 rear cover will be a bargain.
Darkat70 said:
The Ultra has a raised camera lens too, but the silcone case im using is just right enough to make it flush so theres no problem with putting it down for me.
Click to expand...
Click to collapse
If it's flush, it would still come into contact with any surface you placed it on. I'm having a hell of a time finding a case that maintains a thin profile but has raised edges along the camera so that it can be recessed. In the meantime I use a little tempered glass protector back there. But it sucks cause it smudges easily and isn't as easy to clean. The search continues.
chetly968 said:
If it's flush, it would still come into contact with any surface you placed it on. I'm having a hell of a time finding a case that maintains a thin profile but has raised edges along the camera so that it can be recessed. In the meantime I use a little tempered glass protector back there. But it sucks cause it smudges easily and isn't as easy to clean. The search continues.
Click to expand...
Click to collapse
The lens does not come in to contact with the surface so n like i said its good for me.
Darkat70 said:
The lens does not come in to contact with the surface so n like i said its good for me.
Click to expand...
Click to collapse
Ah so it's not flush
chetly968 said:
Ah so it's not flush
Click to expand...
Click to collapse
Its flush, but for example if i wet the surface with a cloth then place my phone down. The case is wet, the camera lens is dry.

back glass strength

I had my Razr in my back pocket the other week, and when i sat down in a car i heard a quiet cracking noise, the back glass cracked.... How hard is it to swap and are they really that brittle? Thanks!
I can't speak for how hard it is to install the new one but it's literally just a piece of glass with the adhesive strips. It'd be pretty trivial with a spudger/knife and a heat-gun. It looks like the going rate for a new one is around $100USD from AliExpress: https://www.aliexpress.com/item/1005002618579898.html
Glass only bends so much. It's neither solid nor liquid, an amorphous solid. A bizarre material, the laws of hydraulics can apply to it. Making some of it's behaviors seem baffling.
I have a Note 10+, which is huge. I always wear bdu pants. The thigh cargo pockets are perfect for phones.
Watch a tear down vid of that phone before you dig in. Take your time and have a OEM seal kit to close it back up.
blackhawk said:
Take your time and have a OEM seal kit to close it back up.
Click to expand...
Click to collapse
This is huge, make sure you have those adhesive strips!
In case phone is used without protecting case, highly recommend putting hydrogel film on the phone back and front glass panell, it's literally invisible but create extra protection as well a makes phone less slippery in hands.
Putting hydrogel screen protector on internal display is a different story, I have it on and so far no issues after few month.
kreoll said:
In case phone is used without protecting case, highly recommend putting hydrogel film on the phone back and front glass panell, it's literally invisible but create extra protection as well a makes phone less slippery in hands.
Putting hydrogel screen protector on internal display is a different story, I have it on and so far no issues after few month.
Click to expand...
Click to collapse
Welcome to XDA
You really need a good case to protect from face plants and corner hits when drop as well as from being flexed. Any impact that can bent the frame or shatter the display can damage chipsets and the mobo by high G loading alone. A good case spreads out the impact G loading spike making drops survivable.
blackhawk said:
Welcome to XDA
You really need a good case to protect from face plants and corner hits when drop as well as from being flexed. Any impact that can bent the frame or shatter the display can damage chipsets and the mobo by high G loading alone. A good case spreads out the impact G loading spike making drops survivable.
Click to expand...
Click to collapse
True, after using phone for few weeks with just hydrogel film on it I've ordered few cases on Amazon to get more protection. I was looking for compact phone thus chosen Razr and don't want to add any bulk to it.
Finally ended up with evutec carbon case, may be not super protective comparing to others but it's almost perfect in terms of look & feel. Hydrogel film still used along with the case and completely invisible.
kreoll said:
True, after using phone for few weeks with just hydrogel film on it I've ordered few cases on Amazon to get more protection. I was looking for compact phone thus chosen Razr and don't want to add any bulk to it.
Finally ended up with evutec carbon case, may be not super protective comparing to others but it's almost perfect in terms of look & feel. Hydrogel film still used along with the case and completely invisible.
Click to expand...
Click to collapse
Yeah it's a trade off.
Sometimes it's more practical to tether the phone if you have a tether point.
BDU pants have cargo pockets that are perfect for stashing phones.
Belt pouches are another option.
The occasional fast as on ice slipe/hip-shoulder fall/landing on the phone side might not end well.
There's only so much you can reasonably do.

Categories

Resources