Develop Bugs

Good all round case

Hey people.
I know this question has come up time and time again but I am just overwhelmed with different cases. I must have spent over an hour looking at all different ones.
I am getting a SGSII in a few days and currently using a Wildfire S with a simple blue silicone case on it.
Now I want something which will give it as much protection as possible without adding too much bulk. Ideally one which will cover all the phone except the screen of course.
I have looked at ones like SGP and case-mate but there are so many different ones I dunno what to choose. I just want one which will not take away any of the looks of the phone.

How about the Incipio NGP case (black)?

I'm looking at the SGP neo hybrid but I have seen people complain about the back sagging which makes me a bit skeptical about buying it.

imlgl said:
I'm looking at the SGP neo hybrid but I have seen people complain about the back sagging which makes me a bit skeptical about buying it.
Click to expand...
Click to collapse
All Silicone sgp cases tend to sag within 2 months. I'd personally go for a barely there case, in my experiences the Galaxy is sturdy enough. You only need something to protect it from scratching. I've been using it for some months without case now and have dropped it from a bunk bed and catapulted it across the room (no questions) and the only damage is some scratches. A screen protector is a must though, my previous gorrila glass display proved not to be scratch resistant at all.

gangsterjoop said:
All Silicone sgp cases tend to sag within 2 months. I'd personally go for a barely there case, in my experiences the Galaxy is sturdy enough. You only need something to protect it from scratching. I've been using it for some months without case now and have dropped it from a bunk bed and catapulted it across the room (no questions) and the only damage is some scratches. A screen protector is a must though, my previous gorrila glass display proved not to be scratch resistant at all.
Click to expand...
Click to collapse
A case is a must for me really. Especially when I am out getting drunk. I usually tend to drop my phone onto concrete while stumbling about haha. I think I will get the barely there one as I have seen a lot of good reviews.
Also how well does it protect the top & bottom because from the pictures the top and bottom aren't protected. Does this hinder the protection in any way?

Recommendation for Capdase Xpose. Awesome high-quality case.

Of the cases I have, I'd opt for the Barely There, or the Incipio. Slim, some protection, don't sag as quickly/easily as the Neo Hybrid. I was able to make the Incipio very, very slightly loose at the back after 4 hours of gaming the other day, but it bounced back, the same can't be said for the Neo Hybrid which gets worse with each heat cycle.
I like the Otterbox Commuter as well, but it's much bigger than the others, I'll use it, but only when travelling in rough places.
One I'm very curious about, but it's a pain for me to actually get is the Walnutt bumper.

Galaxy S3 Dust Problem?

Hey Guys and Girls,
I just got my Galaxy S III a month ago and I am developing a problem I can't seem to figure out. On the edges of the phone, where the glass meets the blue plastic I am getting a build up of dirt. I keep my hands very clean as I am super OCD about my devices. With that being said, I am getting dirt and "grime" build up in the sides. Sometimes it's hard to notice but it becomes clearer as more days go on. I have contacted Samsung and they were unwilling to decide what it was without seeing it. I contacted my carrier who sent me a replacement after ten or more calls. The new device seems to suffer the same fate. I am wondering if anyone else is having this problem or knows how to get rid of it. I tried to clean it with an air canister with no luck and plenty of sharp objects. None which would do a great job, the only thing that came close was a toothbrush and that was difficult to say the least. Is this a known problem or am I getting more defective devices. Thanks for your input.
P.S- I know the photo isn't great and I will take more to show the effects. It is most noticeable in the corners, the sides, and around the speaker and home button.
Appreciate the help!

I don't have any issues and I have the white one, so it should be more obvious.
Sent from my SAMSUNG-SGH-I747 using xda premium

I had some lint build up in mine before I got a case (free zoogue deal) that covers the gap. I just used the corner of a folded piece of paper to clean it out a few times. Personally, I consider that gap to be a design flaw, particularly considering that the gap is not uniform on all sides...

annulation said:
I had some lint build up in mine before I got a case (free zoogue deal) that covers the gap. I just used the corner of a folded piece of paper to clean it out a few times. Personally, I consider that gap to be a design flaw, particularly considering that the gap is not uniform on all sides...
Click to expand...
Click to collapse
I will try the paper trick, pretty much the only thing I didn't use. I find the gap to be a flaw as well considering that over time it is only bound to get worse. I have found that some spots are wider than others. Not sure why they would create a design like this but glad to see I am not the only one. I thought I was being OCD for awhile.

chaoticfury said:
I will try the paper trick, pretty much the only thing I didn't use. I find the gap to be a flaw as well considering that over time it is only bound to get worse. I have found that some spots are wider than others. Not sure why they would create a design like this but glad to see I am not the only one. I thought I was being OCD for awhile.
Click to expand...
Click to collapse
The gap isn't a design flaw: it's actually the seam between the front and back of the phone, and it's where you slip a spudger (flat plastic knife) in order to pry it apart (after rear screws are removed) for repair.
Just put a case on it -- any case will do -- and then it's virtually a non-issue. If you don't want to use case then just live with having to clean out the gunk build-up every couple months.
(And, frankly, it's kinda lame that you *****ed about this "problem" over 10 phonecalls and then they finally gave you a replacement phone to make you go away and stop costing them money)

Before I had a case I didn't have this issue. The gap isn't very noticeable. I have a Diztronic TPU case now ($10 Amazon) and it has a small lip which covers that gap. Maybe you have dirty pockets or a batch of phones that just had a slightly larger gap.

zmore said:
The gap isn't a design flaw: it's actually the seam between the front and back of the phone, and it's where you slip a spudger (flat plastic knife) in order to pry it apart (after rear screws are removed) for repair.
Just put a case on it -- any case will do -- and then it's virtually a non-issue. If you don't want to use case then just live with having to clean out the gunk build-up every couple months.
(And, frankly, it's kinda lame that you *****ed about this "problem" over 10 phonecalls and then they finally gave you a replacement phone to make you go away and stop costing them money)
Click to expand...
Click to collapse
You are entitled to your opinion about how lame or not lame it was for me to call, but the truth of the matter is I have owned a multitude of phones in my lifetime, none which had a problem like this at all. I am not sure if you are in Canada, but a three year term for a phone that constantly needs maintenance for removing dust does not seem like a premium device in my book. Not to mention the fact that if it finds it's way under the screen as you suggest, then it would only cause future problems, outside of the one year warranty, rendering me with an inoperable phone. So I can't say I agree with your analysis of my calls. Not to mention it costs them a negligible amount to speak with me on the phone.
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.

chaoticfury said:
You are entitled to your opinion about how lame or not lame it was for me to call, but the truth of the matter is I have owned a multitude of phones in my lifetime, none which had a problem like this at all. I am not sure if you are in Canada, but a three year term for a phone that constantly needs maintenance for removing dust does not seem like a premium device in my book. Not to mention the fact that if it finds it's way under the screen as you suggest, then it would only cause future problems, outside of the one year warranty, rendering me with an inoperable phone. So I can't say I agree with your analysis of my calls. Not to mention it costs them a negligible amount to speak with me on the phone.
Click to expand...
Click to collapse
It can't get behind the screen because it's one piece, so don't worry about that.
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.
Click to expand...
Click to collapse
Yeah, many of the hard polycarb cases -- like Samsung's mesh case, or the popular Rock Quicksand -- that offer little edge protection don't cover the the entire lip because they can't. All TPU and hybrid cases do, though.

chaoticfury said:
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.
Click to expand...
Click to collapse
Most TPU cases have a lip which wraps around the front. It's not a hard plastic case that tries to snap into place. I have the Diztronic case and the lip is definitely there and it definitely covers the gap you're referring to. I had a TPU case for my GSII and it's the same basic design. If you don't want a case then you'll have to put up with the dirt in the crevices or get a different phone.

AngelsNecropolis said:
Most TPU cases have a lip which wraps around the front. It's not a hard plastic case that tries to snap into place. I have the Diztronic case and the lip is definitely there and it definitely covers the gap you're referring to. I had a TPU case for my GSII and it's the same basic design. If you don't want a case then you'll have to put up with the dirt in the crevices or get a different phone.
Click to expand...
Click to collapse
Thanks Angels,
I will have a look at the cases as you suggest and try to find one that I like. I would hate to give up this phone as I very much enjoy it and don't see any other phones that interest me at the present moment.

chaoticfury said:
Thanks Angels,
I will have a look at the cases as you suggest and try to find one that I like. I would hate to give up this phone as I very much enjoy it and don't see any other phones that interest me at the present moment.
Click to expand...
Click to collapse
Np. I use this case. http://www.amazon.com/Diztronic-Fle...54&sr=8-7&keywords=diztronic+galaxy+s+III+tpu The matte feel is nice and it comes with a screen protector which I applied and it's good quality as well. It doesn't attract as much finger prints as other screen protectors I've used and it's very clear.
Off Topic:
But... even with a TPU case you'll have to be careful of drops. Gorilla Glass isn't as strong as it's touted to be against sudden impacts (watch iPhone5 vs Samsung Galaxy S III drop test). My GSII got a small scratch prior to applying a protector and just today a coworker dropped her GSII on concrete and the TPU case didn't stop the screen from severely cracking. It will protect from a lot of surface scratches though. My mom just got her first smart phone (a Pantech) and dropped it and it slid across the floor. I hadn't gotten her screen protector yet and her screen has some small scratches and nicks.
I guess my point is even if it reduces the aesthetics get a case, a screen protector, and be careful still.

I ordered that case like you suggested but it has yet to arrive. The replacement phone I got from my carrier is having even worse problems than my first one. I was even more careful with this than the others. Not really sure what to do. I am intrigued by the fact that I see nobody who has a white GS3 post problems about it. I wonder if the blue is the only one with these kind of issues.

I've got a blue one and don't have that problem
Galaxy SIII via XDA premium

This thread on tight fitting cases might be helpful.

I have. White phone no such issues I also noticed the white button sticks out a bit more.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

I had a blue one and had the same problem. The dust was noticeable around the edge and around the speaker. I ended up exchanging it because the home button died. All they had in stock was white so I took it. I have to say, the white one has much less of a seam and there is no noticeable dust build up!
Sent from my SGH-I747M using Tapatalk 2

cboone said:
I had a blue one and had the same problem. The dust was noticeable around the edge and around the speaker. I ended up exchanging it because the home button died. All they had in stock was white so I took it. I have to say, the white one has much less of a seam and there is no noticeable dust build up!
Sent from my SGH-I747M using Tapatalk 2
Click to expand...
Click to collapse
Going to see if I can get a white. I prefer blue but I hate this problem.

Mine collects dust too and I use a Rock case. I'd clean it if I could, but I can't seem to fit paper or anything in to push it out either. It's hardly visible, not putting too much thought in to it.

After 2 Years with Iphone .....

Hello,
after more than 2 Years with the IPhone 4 I'll become next week the HTC One Black Vodafone Germany.
Please be so kindly and give me some urgent handling recommendations...do I need a display protection, any cases or whatever....?
Many thanks.....

speedmaster.nl said:
Hello,
after more than 2 Years with the IPhone 4 I'll become next week the HTC One Black Vodafone Germany.
Please be so kindly and give me some urgent handling recommendations...do I need a display protection, any cases or whatever....?
Many thanks.....
Click to expand...
Click to collapse
It depends on how careful you are with your phone, but I would definitely recommend a case and screen protector to avoid getting scratches, if nothing else.

tyler.durden said:
It depends on how careful you are with your phone, but I would definitely recommend a case and screen protector to avoid getting scratches, if nothing else.
Click to expand...
Click to collapse
I'm very careful but I agree with you for a screen protector and a case, any recommendation for the case, I saw the origin HTC bi color case but some people said it makes scratches....!?!

speedmaster.nl said:
I'm very careful but I agree with you for a screen protector and a case, any recommendation for the case, I saw the origin HTC bi color case but some people said it makes scratches....!?!
Click to expand...
Click to collapse
That depends on how much protection you want and if you mind covering up the back of the phone (it's nicer than most phones so some people rather not).
http://www.basalent.com/htc-one-2013-m7-hybri-flex-crystal-clear-pctpu-case-white.html
That's the one I have, and I like it a lot. Protects the sides and the back, without covering the aluminum body.

sohungry said:
That depends on how much protection you want and if you mind covering up the back of the phone (it's nicer than most phones so some people rather not).
http://www.basalent.com/htc-one-2013-m7-hybri-flex-crystal-clear-pctpu-case-white.html
That's the one I have, and I like it a lot. Protects the sides and the back, without covering the aluminum body.
Click to expand...
Click to collapse
I never have much issue with screen scratches (usually) but I'd still err on the side of caution and do at the very least a screen protector. I'm going to replace my ZAGG (which I'm hoping is just scratched and not a crack on the screen ) with one of those fancy shmancy glass screen protectors with the rounded edges.

felacio said:
I never have much issue with screen scratches (usually) but I'd still err on the side of caution and do at the very least a screen protector. I'm going to replace my ZAGG (which I'm hoping is just scratched and not a crack on the screen ) with one of those fancy shmancy glass screen protectors with the rounded edges.
Click to expand...
Click to collapse
Ha ha, I have one of those fancy shmancy glass screen protectors. It feels nice and looks nice, but there are bubbles in the corners

TPU skin is good enough if you have good reflexes.
While it is falling, you'll probably break its fall by hitting it up. Plus you can find absolutely clear TPU skins.
A case is a must, screen protector is not.

What I do is whenever I get a brand new phone, I always start with a good protective case and a screen protector. After a few months, I gradually get thinner cases and usually end up with those 0.3-0.5mm thin cases that makes the phone feel nice and less bulky. If you plan to rock the phone naked, I'd recommend a phone pouch.
Sent from the "ONE" phone for me

Thank you very much for the quick response I'm still searching for a good frame or case, is it true that the origin HTC bi color case leaves scratches on the phone I won't believe it .....?! I also hope that the black version is scratch resistant some people said not......I just talked with a Vodafone assistant to change the black against the silver but he said to me that himself have the black one and I looks quite better and after two month usage without any case he have no scratches. I'll take the black one, it comes next week and I will give you a first impression.
Can't await

sauprankul said:
A case is a must...
Click to expand...
Click to collapse
WHY?

ro_explorer said:
WHY?
Click to expand...
Click to collapse
Its not REALLY a must IMO. The phone actually holds up very well. Yesterday i purposefully put the phone in the same pocket with a bunch of coins and it scratched the aluminum but the scratches wiped right off. If you drop things than that would be a different story at aluminum can easily dent :good:

That was my point also ... it looks a little exaggerated to say that a case is a must.
I intend to use the phone "naked" indoors. Any case will practically ruin the nice feeling of the phone itself. Of course, if you drop it then there are chances to ruin the nice finish.
I'm also using the phone outdoors, fr sports. For that purpose I ordered a trident kraken ams ... I hope it will do the job.
P.S.: I saw that a OEM housing is "only" 50 bucks, free shipping ... I guess I'll buy one just in case .

I would say that if you carry your phone in your pocket a case is a must. I generally like to go case-less (especially with a phone this pretty), but after having my One slip out of my pocket on a couple of occasions, I ended up getting a case (Poetic Atmosphere; the rubberized edges keep it from slipping out). If you intend on getting a pouch of some sort, I think case-free is fine.
Also, I don't have a screen protector and have no scratches, though I tend to be pretty gentle with my phones.

ro_explorer said:
That was my point also ... it looks a little exaggerated to say that a case is a must.
I intend to use the phone "naked" indoors. Any case will practically ruin the nice feeling of the phone itself. Of course, if you drop it then there are chances to ruin the nice finish.
I'm also using the phone outdoors, fr sports. For that purpose I ordered a trident kraken ams ... I hope it will do the job.
P.S.: I saw that a OEM housing is "only" 50 bucks, free shipping ... I guess I'll buy one just in case .
Click to expand...
Click to collapse
On Etradesupply, the OEM housing is only like 30 bucks.
I say a TPU case is a must because:
1) You WILL drop it at some point, it's anodized AL, not grippy plastic.
2) The case provides a lip, so if you put your phone face down, the screen won't touch the surface & scratch from w/e dirt is there.
3) The case will also keep the camera lens (or the anodized back) from touching any surfaces.
4) I wear a ring, and if I don't put a case on, the ring scratches ONTO the phone. That's not good.
If you're REALLY careful, then none of these matter. but it's hard to be perfect.
Besides, when I'm in bed, I can just quickly remove the case for a little bit. It feels nice.

This phone is just too good looking to cover up, IMO. I've been going naked since day one I don't have a single scratch on it. The aluminum housing is solid and whatever glass HTC used really resists scratching. My One X screen got covered in microscratches pretty quickly, but I haven't seen anything on this phone.
Just treat it with care and you can forget the case. CNET tried to destroy their test phone and couldn't do it.

I have a double dip case bought at once with the phone. Well .. the feeling simply does not compare with the case on. It just loos cheap and plastic'ish ... is worse than galaxy S4 actually. So, with all the risks involved I will go "naked" while in normal use and I will use the kraken ams for outdoors. That's all ...

I only like corner protection. I don't care about the back.
I used to have a screen protector on this but I don't like it, it doesn't make the display look as nice. I have since taken it off and have not gotten any scratches, not even micro ones. I think this display is more tough than previous GG2 screens. I had the ONE X+ and it scratched easily.
Get one of these: http://forum.xda-developers.com/showthread.php?t=2365102

After 8 hours....
....I'm going crazy with the phone, the App Store is horrible I found nothing what I need, i looking for the 8player and found many sites but not in the App Store, can't connect my iPhone via Bluetooth to import my contacts, also with the ipad...
The phone looks and feels awesome that's for sure but android is horrible, don't know what I should do.....please be so kind and give me recommendations, I won't give it back for the iPhone 5.......so I don't know what I should do!?!?!

speedmaster.nl said:
....I'm going crazy with the phone, the App Store is horrible I found nothing what I need, i looking for the 8player and found many sites but not in the App Store, can't connect my iPhone via Bluetooth to import my contacts, also with the ipad...
The phone looks and feels awesome that's for sure but android is horrible, don't know what I should do.....please be so kind and give me recommendations, I won't give it back for the iPhone 5.......so I don't know what I should do!?!?!
Click to expand...
Click to collapse
I respectfully disagree, as will most in this forum that Android is horrible.
Maybe you can post what apps you are looking for and other users can tell you if there are equivalent apps.

mfpreach said:
I respectfully disagree, as will most in this forum that Android is horrible.
Maybe you can post what apps you are looking for and other users can tell you if there are equivalent apps.
Click to expand...
Click to collapse
Hello Senior Member,
Thanks so much for your quick response, ok I'm impatient, I found the first app for my marantz av and the buffalo server which works its the bubbleUPnP and it works with the iPhone equivalent not still searching the for the 8player.

Recommendations for a Slim, Soft-Touch TPU Case?

I'm a new Axon 7 owner and am currently searching for a case to use on this phone. The stock transparent case that comes with the phone is great but due to the fact it's a glossy plastic, it attracts a lot of grease from my fingers and feels dirty after a while. I also dislike it because the sweat from my hands will form into condensation on the back of the case. I also have a problem where the jack on my headphones (Audio Technica ATH-M50) is too large to fit in the hole provided.
I decided to purchase the Spigen 'Rugged Armor' case from Amazon after reading a lot of positive comments about it, but I have been left disappointed and debating whether to return it due to the sheer size and thickness that makes handling the phone (Which is already large enough!) incredibly difficult with small hands. The case does not add much friction despite the material used having a rubber-like appearance, and I actually feel more likely to drop the phone as a result of trying to fumble with the added size. As well as this, the cut-out for the headphone jack is still too small even though it's larger than the wider than the one seen on the stock case. I also find it a lot more difficult to access the fingerprint scanner due to the thickness of the case surrounding it. Another problem is that the case is quite difficult to put onto the phone and a lot harder to remove, to the point where it feels like i'm actually going to damage the phone by attempting to do this!
For my previous phone, a Lenovo ZUK Z2, I had a fantastic Nillkin 'Frosted Shield' shell case that was made from a soft-touch rubber-like plastic. It was very slim at about 2mm in thickness at most, and although it didn't offer much in the way of drop-protection, it did have a nice textured back and that increased the grip tremendously. So, despite the case not being able to protect the phone quite as much from being dropped, it didn't matter because the chances of dropping the phone in the first place were a lot less likely. I wondered whether there was something similar for the Axon 7, but instead in a TPU-style with the sealed corners, and the same thickness as the stock case that's included with the phone? Any recommendations would be most appreciated.

This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.

Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
That looks nice, it's kinda like the old Sandstone Black finish on the OnePlus One. There was one similar to this on Amazon UK but I don't think it had the same texture to it. My only compliant with that one is that it isn't a TPU case which completely covers the corners, but on the other hand the sand texture probably adds a lot of grip to reduce the risk of it being dropped.
I'm currently looking into getting the J&D case from their official website. It's in TPU-form which covers the entire phone (Except from the power/volume buttons!) and has the textured soft-touch back I wanted. The only problem with this one is that the glossy plastic edges look a bit tacky in the pictures, but hopefully it's not as bad in person as it looks on the website. I have a discount code which knocks a subtle 15% off the price listed, so it might be worth a shot.

Looking into this now myself. The stock clear case will go yellow as they all do. Getting cheap see through black case as a temporary till I find a good one. I find the clear one a tad loose at the side.

Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
Hi there,
Does this case provide good grip?
Thanks for confirming!

joaste said:
Hi there,
Does this case provide good grip?
Thanks for confirming!
Click to expand...
Click to collapse
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent

Sui77 said:
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent
Click to expand...
Click to collapse
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.

joaste said:
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.
Click to expand...
Click to collapse
This one is a different story.
It's the best pick you can get

Sui77 said:
This one is a different story.
It's the best pick you can get
Click to expand...
Click to collapse
Thanks. Just ordered it.

joaste said:
Thanks. Just ordered it.
Click to expand...
Click to collapse
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.

P650SE said:
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.
Click to expand...
Click to collapse
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.

joaste said:
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.
Click to expand...
Click to collapse
Thanks for posting those pictures! That's a shame to hear the grip wasn't as good as expected. I wanted something which provided more grip than the stock case, so maybe this isn't the right one for me. I also live in the United Kingdom and having the case shipped from Germany would make it more expensive in postage costs. It does look like a nice case but I am worried it might not offer much protection if the phone is dropped. I think the J&D case would perhaps be better because it has a soft-touch back and conceals all the corners properly.

I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.

christoophat said:
I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.
Click to expand...
Click to collapse
Thanks for sharing your thoughts and opinions regarding the cases available for the Axon 7. It's interesting to hear how you found the Spigen case not to be bulky, because I found the opposite and returned it for that exact reason. I eventually purchased one of the cheap, plastic shell cases from AliExpress similar to the that in the pictures Joaste posted above.
My overall opinion on this case has been positive but it has worn on the edges and there are cracks down all four corners. As you mentioned, a shell case does not offer much drop protection but it's definitely better than not having a case at all and it does improve the grip quite notably. However, I wish it had a textured or 'Sandstone' back to help avoid grease buildup.
I am now looking for another case, but options in the UK are limited since the Axon 7 is not officially sold here.

I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.

I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.

emepher said:
I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.
Click to expand...
Click to collapse
I decided to order one of these in black to try out. Have been quite happy with my Spigen, but after installing this Proworx case yesterday, I think I am falling in love. Seems to offer enough protection, fits & looks nice, AND I kind of like how the buttons are a bit harder to push in, which actually prevents me from squeezing open the screen every time I try to pick it up. :good:

RobboW said:
I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.
Click to expand...
Click to collapse
Quoting myself here.
Today I fitted the full coverage protector to my Axon 7 and it fits into the Poetic Revolution case nicely! Glad I stripped out the dry protectors in the Poetic cases. I've also now fitted a plastic protector over the glass one as a quick and easy tear off to sacrifice for wear and tear but the glass one makes the front of the phone flat. Even with two stacked protectors, touch works perfectly.
The picture is slightly misleading as the black section also covers the capacitive buttons so there's no indicator of position, but not being backlit anyway, it makes little difference.
Here's a quicky bunch of pics. I have a soft TPU smoky case, black Poetic Revolution and a blue/grey Poetic Revolution which can be mix and matched. Got a couple of little bubbles under the plastic protector and will fix that later, or just remove it. Looks good with just the full coverage glass one.

If anyone is looking for a slim case I just picked up a Bear Motion Sand from eBay. Best case I've had so far for my A7 and I've tried quite a few. Feels like my OPO did.

https://www.amazon.com/dp/B01J9Y5CQ...d_r=3683683e-ab8d-11e8-96dd-777fa7fb2507&th=1
Been using this one for over 6 months now with out any issues , not as bulky as it looks and the stand is useful . I also have a full body clear skin from clear-coat that fits superbly, clear-coat has various outlets through the UK and installs as you wait , is a bit pricey at £30 for the full skin .
I work in the building trade so need it well protected .

Google Fabric Cases

Just wondering if anyone has any feedback on the fabric cases available on the google store ? Do they collect lint or dust ? unlike a plastic case do they grip to your pockets when reaching for your phone ?

The fabric cases have a little bit of friction but not enough that it catches or makes it difficult to slide in/out of pockets. When you look at the oils and fingerprints on other cases just remember that your fabric case is actually absorbing most of that. Just because you can't see oil, dust, and dirt that it doesn't mean it's not there. I'd recommend that once a week you do the following:
Take the case off the phone (this should be assumed, but I don't know you)
Run the case under a warm water faucet until it looks and feels like it's saturated
Lather up some hand soap on your hands and then rub into the case for about a minute
Wash off the case (and your hands) for another minute rubbing on the case to make sure you're pushing the soap out
Let the case air dry for a few hours or use the low setting on a hair dryer (your hands are ok to dry using a towel or paper towel)

Is protection any good (edges, corners and front lip)? I always had SPECK cases but this year, they do not seem to come up with any Pixel 5 cases. I need a case that both looks good and adds some reasons protection against drops without adding too much bulk like the UA cases do.
Also, I am a little concerned that the fabric cases will stand the test of time. Any experiences?
I read that the case comes with a raised front "lip" to protect the display and IIRC, fabric cases for older models did not have this. Was the built updated?

I got a Google fabric case for my 3xl. Phone falls and hits right on the bottom edge where there is no protection.!
Screen cracks right at that spot. No problem, call Google - they denied my claim for a new screen! Said the case wasn't designed to protect the phone!
Screw Google and thier cases. I've dropped my 4XL many times with the UAG and or Spigen clear case on it and never had any damage!

ginfest said:
I got a Google fabric case for my 3xl. Phone falls and hits right on the bottom edge where there is no protection.!
Screen cracks right at that spot. No problem, call Google - they denied my claim for a new screen! Said the case wasn't designed to protect the phone!
Screw Google and thier cases. I've dropped my 4XL many times with the UAG and or Spigen clear case on it and never had any damage!
Click to expand...
Click to collapse
This is why I always try to go with the most grippy case.
The fabric case is one of the most slippery cases with dry hands. You just open you hand and your phone slips off like a flying bomb.
I've been using Spigen Thin Fit in black colour and it's a bit more grippy than a classic TPU.
However mate silicone rubber cases are probably even more grippy.
Sent from my Pixel 5 using Tapatalk

I bought one of these for my 3xl, it broke the first time my phone fell from my desk.
---------- Post added at 09:23 AM ---------- Previous post was at 09:22 AM ----------
ademmer said:
Is protection any good (edges, corners and front lip)? I always had SPECK cases but this year, they do not seem to come up with any Pixel 5 cases. I need a case that both looks good and adds some reasons protection against drops without adding too much bulk like the UA cases do.
Also, I am a little concerned that the fabric cases will stand the test of time. Any experiences?
I read that the case comes with a raised front "lip" to protect the display and IIRC, fabric cases for older models did not have this. Was the built updated?
Click to expand...
Click to collapse
The protection is NOT very good and as someone else noted here, even google seems unwilling to honor claims if you have the device in the case and it falls and breaks.

I've had this case for two days. My first Google fabric case. I don't find it slippery and yes, it's easy to put in pocket and take out. I am concerned about the exposed bottom though. It would really have to land in a weird way to hit it though. I'm ordering a cheap tpu case as well however.
It does look real good. I have the blue version.

I got the case 3 days ago, so far I like it, like already mentioned the bottom being open is a worry but the case is very nice. I had a Spigen thin clear one for 5 days but it was a bit too bulky.

Given that this listing has now popped up, aos tv for pc the timeframe fits with what the audio acoustics firm turned into capable of share prior to this discovery. However, we are aware and might verify that the existing T-four hundred Comply Foam Tips are compatible with Pixel Buds. That stated, the larger sizes can cause troubles with the Pixel Buds case, as we have explained previously. A committed earbud tip for Google’s first clearly wi-fi earbuds is probably a warm price tag in that regard.

The fabric WILL get dirty and discolor in a few weeks. It looks good initially but wont when the fabric darkens from oils.
The case doesn't feel the most secure on the phone, like if it's dropped I feel the phone would pop out of the case. The case doesnt "snap" onto the phone with a lip around the front class.
The case doesn't allow for the phone to sit nicely on the Pixel stand (wireless charger). THIS is a shame, you have to balance the case/phone for it to stand straight

This is not my experience at all. The case is very tight and very secure. It is the first case that won't even allow a skin underneath it without tearing it up because it is so snug and the case wraps around to the front catching the edge of any skin. It doesnt cover the bottom of the phone which could be a negative for some.
I also have the lightest 'static grey' colour. I used the case every day with dark coloured and unwashed denim. It picked up a little oil on the outer edges from pocket friction after a month. Quick wash under the tap and it was back to brand new.
tlxxxsracer said:
The fabric WILL get dirty and discolor in a few weeks. It looks good initially but wont when the fabric darkens from oils.
The case doesn't feel the most secure on the phone, like if it's dropped I feel the phone would pop out of the case. The case doesnt "snap" onto the phone with a lip around the front class.
The case doesn't allow for the phone to sit nicely on the Pixel stand (wireless charger). THIS is a shame, you have to balance the case/phone for it to stand straight
Click to expand...
Click to collapse

thetonyclifton said:
This is not my experience at all. The case is very tight and very secure. It is the first case that won't even allow a skin underneath it without tearing it up because it is so snug and the case wraps around to the front catching the edge of any skin. It doesnt cover the bottom of the phone which could be a negative for some.
I also have the lightest 'static grey' colour. I used the case every day with dark coloured and unwashed denim. It picked up a little oil on the outer edges from pocket friction after a month. Quick wash under the tap and it was back to brand new.
Click to expand...
Click to collapse
I agree, I've had this case for over a month now and it doesn't feel like it will come off the phone at all. Haven't dropped the phone yet to test it out though. Also while I use the phone a ton, I haven't felt a need to wash mine yet, but of course YMMV depending upon your environment, if you use the phone while you eat, etc...
I just got the Speck grip case too only because I was worried about the open part of Fabric case on the bottom, but nothing else. I really dig the way the Fabric case looks much more. The orange button and orange google logo on the back make it easier to find in darkness too.

tlxxxsracer said:
The fabric WILL get dirty and discolor in a few weeks. It looks good initially but wont when the fabric darkens from oils.
The case doesn't feel the most secure on the phone, like if it's dropped I feel the phone would pop out of the case. The case doesnt "snap" onto the phone with a lip around the front class.
Click to expand...
Click to collapse
This is not true. Do you really own this case or just posting your thoughts?
1. It won't get dirty in regular conditions for 99% of the ppl, of course if you work at oil refinery it would. It's easy to wash it with a soft sponge and dish washing liquid - takes 5mins. I owned two fabric cases for p3xl for 2years, now I have it for p5, and it's not dirty at all after 1.5mo. No signs of discolor, do not wash with bleaching substances and do not put in contact with aggressive chemicals. That's it.
2. It doesn't pop out when the phone falls - checked by myself unintentionally. It has a quite good leap from 3 sides, so the phone screen is quite protected. Of course it's not an Otterbox case, but I prefer good aesthetic over bulkiness with a grenade-blast-protection.
My only concern would be that the G logo has peeled off a little - p3xl cases were definitely better with that. But I fixed it with glue and a pin in 5mins
Sorry for my bad English.
Cheers

p0izn said:
This is not true. Do you really own this case or just posting your thoughts?
1. It won't get dirty in regular conditions for 99% of the ppl, of course if you work at oil refinery it would. It's easy to wash it with a soft sponge and dish washing liquid - takes 5mins. I owned two fabric cases for p3xl for 2years, now I have it for p5, and it's not dirty at all after 1.5mo. No signs of discolor, do not wash with bleaching substances and do not put in contact with aggressive chemicals. That's it.
2. It doesn't pop out when the phone falls - checked by myself unintentionally. It has a quite good leap from 3 sides, so the phone screen is quite protected. Of course it's not an Otterbox case, but I prefer good aesthetic over bulkiness with a grenade-blast-protection.
My only concern would be that the G logo has peeled off a little - p3xl cases were definitely better with that. But I fixed it with glue and a pin in 5mins
Sorry for my bad English.
Cheers
Click to expand...
Click to collapse
My experience has bee the same as yours. Love the case.

p0izn said:
This is not true. Do you really own this case or just posting your thoughts?
1. It won't get dirty in regular conditions for 99% of the ppl, of course if you work at oil refinery it would. It's easy to wash it with a soft sponge and dish washing liquid - takes 5mins. I owned two fabric cases for p3xl for 2years, now I have it for p5, and it's not dirty at all after 1.5mo. No signs of discolor, do not wash with bleaching substances and do not put in contact with aggressive chemicals. That's it.
2. It doesn't pop out when the phone falls - checked by myself unintentionally. It has a quite good leap from 3 sides, so the phone screen is quite protected. Of course it's not an Otterbox case, but I prefer good aesthetic over bulkiness with a grenade-blast-protection.
My only concern would be that the G logo has peeled off a little - p3xl cases were definitely better with that. But I fixed it with glue and a pin in 5mins
Sorry for my bad English.
Cheers
Click to expand...
Click to collapse
I do own and use this case.. I also owned it for each pixel model I've owned.
After a few weeks it showed discoloration from oils/grease on my hands and dirt from surfaces. I have cleaned the orange case before but the color never truly returns to that from when its brand new.
Plus in a time right now, this sort of case is a nesting ground for germs and not as easily cleanable

I use Google's green chameleon fabric case for my Pixel 5 sorta sage and I'm satisfied. Non slippery at all. The only problem is that if you put tempered glass the lips of the case is on the same height with the glass. Also using Spigen's Ultra hybrid. Very nice one too!
On my Pixel 4XL I have all the fabric cases except the blueish one. I like them so much.

tlxxxsracer said:
I do own and use this case.. I also owned it for each pixel model I've owned.
After a few weeks it showed discoloration from oils/grease on my hands and dirt from surfaces. I have cleaned the orange case before but the color never truly returns to that from when its brand new.
Plus in a time right now, this sort of case is a nesting ground for germs and not as easily cleanable
Click to expand...
Click to collapse
Covid can't live on a porous surface like this. Most viruses can't. Non-issue.

I love the fabric cases.
Hey guys, Target has a $31 sale on some cases.
and B&HPhotos is having a bigger one, 21 for one color

I decided to get a google fabric case, and found a brand new one on ebay for £15 which i thought was a bargain, was the slate grey version. Have to say i love it, definetly feels premium and its been the best case i have bought.
Looks great, feels great. Recommend it.