Develop Bugs

[ABANDONED][ROM][Pixel 2][UNOFFICIAL] LineageOS 15.1 / 16.0 [walleye]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free and open-source operating system for smartphones and tablet computers, based on the Android mobile platform.
This is an unofficial build of LineageOS for the Pixel 2 (walleye). I always liked Lineage (and its predecessor CyanogenMOD) as well as the Google line of phones. Unfortunately having a Google Pixel phone isn't certainty for a lot of custom ROMS anymore, so that's why I decided to compile my own version. It's been quite challeging, but I think I finally have a build that is good enough to share.
About
This ROM is is always built straight from the LineageOS sources found on https://github.com/lineageos. There are only 3 changes in order to get this build:
The binaries for this ROM come from AICP
GApps are compiled with the ROM from MindTheGapps including the Pixel specific bits for unlimited photo upload for instance
Disabled Android Verity Boot (AVB), so we don't get the security warning when booting
I am not a developer, I only build this ROM and it reflects the the current status. If there are any things missing or not working I suggest to contact the LineageOS team, they are the real geniuses here and deserve all the credits. I will try to keep this ROM updated on a regular basis.
First Installation
Installing the ROM can be a little hard, especially the first install. Upgrades will be relatively easy though. This first setup is only needed when coming from a different ROM then this. I can't support you if you did't follow this first installation. Be warned it will wipe your user data in the process
In order to get the initial setup and also to use the same vendor partition as the ROM you have to install the latest stock Pixel 2 image from Google found here. More info on unlocking your phone and installing the latest Pixel image can be found in the excellent post by @nathanchance found here. The bestway to flash a stock ROM in my opinion is @Deuces' script found here. The benefit of this is that it'll flash the image to both slots, so they are both on the latest build, including the bootloader and radio. All instructions for using the script are inside the forum. After flashing the image make sure you reboot at least once (no need to set it up now though).
Place the ROM and optionally the TWRP zip and root from (Magisk or from LineageOS (not tested) on the phone and reboot to recovery by using the command line (fastboot boot twrp.img)
Wipe 'data' and 'Dalvik / Art Cache' from TWRP - Wipe - Advanced Wipe. Optionally you should also delete the Android folder on your internal storage through the TWRP File Manager
Flash the ROM and optionally the TWRP zip and reboot the phone
Upgrades to new version
After the hard initial work to get the ROM installed it's going to be easy for upgrades to new versions.
Download the new ROM and reboot of flash to TWRP
Flash the new ROM and optionally TWRP. If you want to flash another kernel or a root solution you will have to reboot you phone, so it switches slots and let it boot normally. Then go back to recovery and flash in this order: TWRP - kernel - Magisk and reboot
After a monthly update from Google and only when LineageOS also adapted to the latest monthly sources (I will tell you this) you will have to do an extra step:
Download the latest Lineage OS ROM and place it on the internal storage
Download the latest image from the Google Factory Images site and run Deuces' script. No need to wipe your data!
After the script finishes it automatically boots into the bootloader. From here fastboot into TWRP and flash the previously downloaded new ROM, optionally followed by TWRP.
Optionally, after a reboot you can flash Magisk and/or another kernel.
Not working
Substratum
Use Powerbutton for flashlight when Ambient Display is set
Active Edge
Now playing
Downloads
I'm not maintaining this project anymore, download link has been removed.
Happy flashing

Miraculous... Will flash soon. Thank you for keeping Pixel 2 relevant.

Is link not posted yet?

I want to thank you for posting. But, I get the feeling this will just be closed as well really soon. Hope this sticks around, because XDA is not what it use to be, at all!

JCBiznatch said:
I want to thank you for posting. But, I get the feeling this will just be closed as well really soon. Hope this sticks around, because XDA is not what it use to be, at all!
Click to expand...
Click to collapse
Why would it be closed?

JCBiznatch said:
I want to thank you for posting. But, I get the feeling this will just be closed as well really soon. Hope this sticks around, because XDA is not what it use to be, at all!
Click to expand...
Click to collapse
I completely agree...

Any chance for an MD5

jascolli said:
Any chance for an MD5
Click to expand...
Click to collapse
Added in the same folder:
MD5: a28cd4f3cabe627fbe99cbe1485cba3f

TCUofficial said:
Why would it be closed?
Click to expand...
Click to collapse
I don't have a clue. It just seems that anyone who posts a ROM gets the thread closed. It's almost as if they don't want walleye to have any development.
Just check this forum out compared to the pixel XL 2 forum.

Thanks very much for sharing this. I've got it installed and it's running fantastic.

Everyone who has had a rom thread has closed the thread for different reasons, time, family, frustration or lack of support etc...
I see don't see why we should be negative and assumee the same is the case with this build. Every rom thread has produced better and more stable builds as time progressed.
@Joregen2009, I have seen your name around before, appreciate you building!!

razrlover said:
Everyone who has had a rom thread has closed the thread for different reasons, time, family, frustration or lack of support etc...
I see don't see why we should be negative and assumee the same is the case with this build. Every rom thread has produced better and more stable builds as time progressed.
@Joregen2009, I have seen your name around before, appreciate you building!!
Click to expand...
Click to collapse
It's my pleasure. I only wanted to share my build, because I know that many of you much be as frustrated as me for the lack of ROMs for our device.
We'll see how long this thread will hold. If it's up to me I'll try to provide at least a weekly build from the actual sources, or whenever there are some major changes in the sources that are important for our device until the Lineage Team declares our device official. Let's hope that happens soon and that this thread can contribute to that.

Awesome! Thanks for this ROM. Any known issues one should be aware of before flashing?

Does Lineage have Substratum support ?? Having trouble connecting......
Update. Found answer - : no substratum support

@jorgen2009
Hey thanks so much for the ROM. Its working great!
Is there any chance you could link me the kernel source for this specific build? (Pixel2)
I'm trying to figure out how to rebuild it with the drivers for my TP-LINK WN722N V1.
I really don't know what I'm doing but I'm trying to learn.
I'm trying to follow this guide to accomplish this.
https://forum.xda-developers.com/showthread.php?t=2338179
I do have Kali for Magisk up and running just fine.
Lsusb command shows my WiFi Adaptor but the kernel won't let me use it.
Thanks so much for reading, if what I'm trying to do is stupid feel free to let me know why haha. If I get it to work I'll share it with everyone.

redsmith said:
Awesome! Thanks for this ROM. Any known issues one should be aware of before flashing?
Click to expand...
Click to collapse
The only thing that I am aware of is the fact that the battery LED isn't working, but that will be solved in the next build
tkacer said:
Does Lineage have Substratum support ?? Having trouble connecting......
Update. Found answer - : no substratum support
Click to expand...
Click to collapse
Sorry, than I fear it's not supported by LineageOS in general yet, I don't use it myself
gahndii said:
@jorgen2009
Is there any chance you could link me the kernel source for this specific build? (Pixel2)
Click to expand...
Click to collapse
Sure, see LineageOS sources on github, I didn't touch the kernel in this build:
https://github.com/LineageOS/android_kernel_google_wahoo

I am still getting the security warning when booting. Am I the only one so I missed something?
Other question: is the Trusted Faces not working because the used GApps package has not been modified for the Pixel, or the ROM has got some incompatibility issue?

Great job. Just a little bug: Long press power button to turn on torch is not working when Ambient Display is set to always on.

banciii said:
I am still getting the security warning when booting. Am I the only one so I missed something?
Other question: is the Trusted Faces not working because the used GApps package has not been modified for the Pixel, or the ROM has got some incompatibility issue?
Click to expand...
Click to collapse
Are you sure you are on the April vendor? Your vendor version must be the same as the ROM needs (currently the April one).
Trusted Faces is GApps related yes, it's not in MindTheGApps. I'll try to make a build with OpenGApps in to see if that works. Both Face Detection for Media and Face Unlock are in the Nano package (https://github.com/opengapps/opengapps/wiki/Nano-Package)
redsmith said:
Great job. Just a little bug: Long press power button to turn on torch is not working when Ambient Display is set to always on.
Click to expand...
Click to collapse
I'll put it in the known issues list in the OP later this week for an overview

Another build is up. This time I used OpenGapps so you might need to clear the Store cache. I had no problems upgrading myself. The Text-to-speech improved a lot with these Gapps for me.
New in this build is the LED light when charging and some basic stuff for more compatibility with our device and some networks. Also all the normal changes since the last build for LineageOS are in of course. For the download link see the OP. I also adjusted the OP a bit to show the things that are known not to work. Let me know if I missed something so I can adjust the list

[Oreo] LineageOS 15.1 for Xiaomi Redmi Note 2 (HERMES)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 15.1 for Xiaomi Redmi Note 2 (HERMES)​
ABOUT:
ROM Version: Beta
Device: Xiaomi Redmi Note 2 (HERMES)
Maintainer: @ibilux
Build Status: Unofficial
DISCLAIMER:
I am not responsible for anything that may happen to your phone as a result of installing custom ROMs and/or kernels.
You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
FEATURES:
• Working:
Adjustable brightness
Audio
Auto brightness
RIL (calls & mobile data & ussd)
Video
Gallery
Mic
Wi-Fi
FM-Radio
Bluetooth
Internet
GPS
Hotspot
SD Card
Online/Offline charging
Built-in Signature Spoofing (for MicroG)
USB tethering
IR Blaster
Vibration
Rotation sensor
MTP and Mass Storage modes
Lights
Camera (Photos & Video recording) [It's better to use Open Camera or Footej Camera Apps]
DT2W support.
• NOT working:
?
• Bugs:
?
PRECAUTION:
Read the entire OP before posting, downloading, or flashing ANYTHING
Follow all instructions
Please use the search function and read back a few pages before you post any questions
ALWAYS MAKE A NANDROID BACKUP
ALWAYS MAKE AN EXTERNAL BACKUP OF ALL DATA
INSTRUCTIONS:
NOTE:
If you are using the old unofficial Build make a clean flash and don't dirty flash.
CLEAN FLASH:
Reboot into the latest version of TWRP (from here)
Make a NANDROID backup and copy it an external medium (laptop, flash drive, etc) just in case something goes wrong!
Wipe Dalvik/ART cache, system, data, and cache partitions (ANY LESS IS NOT A CLEAN FLASH!)
Flash build
Wipe Cache [Not Necessary]
OPTIONAL: If you want root access, flash Addon SU or from official LineageOS extras
Reboot
DIRTY FLASH:
Reboot into the latest version of TWRP (from here)
Make a NANDROID backup and copy it an external medium (laptop, flash drive, etc) just in case something goes wrong!
Flash build
Wipe Cache [Necessary]
OPTIONAL: If you want root access, flash Addon SU or from official LineageOS extras
Reboot
DOWNLOADS:
ROM
TWRP 3.3.1
BUG REPORTING:
DO NOT REPORT BUGS IF YOU HAVE FLASHED MAGISK, XPOSED, A CUSTOM KERNEL, OR ANY OTHER UNSUPPORTED THIRD-PARTY MODS
The very first step will be to attempt a new download and CLEAN FLASH (WIPE DALVIK/ART CACHE, SYSTEM, DATA, AND CACHE).
Pull an ADB LOGCAT and copy & paste it to HASTEBIN .
Save the log and copy the URL.
Visit HERMES (REDMI NOTE 2 / 2 PRO) - OFFICIAL GROUP and post your issue with the HASTEBIN link of your bug.
Please also tell us what device you're running, what date the build is from, if it was a release build, what packages you flashed with it (what Gapps package, Magisk version, etc).
You may also report bugs in this thread.
Join us at Telegram:
https://t.me/joinchat/AAAAAEAcYGMW9RpRIW2-XQ
XDA: DevDB Information
LineageOS for Xiaomi Redmi Note 2, ROM for the Xiaomi Redmi Note 2
Contributors
Maintainer: @Bilux
This is all based on the work of @Dinolek and the help of other developers.
Thanks to @Dargons10 For building the roms.
XDA:DevDB Information
LineageOS 15.1 for Xiaomi Redmi Note 2 (HERMES), ROM for the Redmi Note 2
Contributors
ibilux, Dinolek
Source Code: https://github.com/ibilux/android_device_tree_hermes
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader & Latest TWRP Recovery
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 1.0.0
Stable Release Date: 2020-04-22
Created 2020-04-23
Last Updated 2020-05-04

TWRP:
MUST FLASH LATEST VERSION OF TWRP TO FLASH THIS BUILD, OR ELSE WILL GET THIS ERROR
DOWNLOAD TWRP 3.3.1
​

Reservation

Heads up, there seems to be an error in the device path in META-INF/com/google/android/updater-script which causes installation to fail (/system won't get mounted).
/dev/block/platform/mtk-msdc.0/11230000.MSDC0/by-name
on my particular phone this needs to be changed to....
/dev/block/platform/mtk-msdc.0/by-name

jblake said:
Heads up, there seems to be an error in the device path in META-INF/com/google/android/updater-script which causes installation to fail (/system won't get mounted).
/dev/block/platform/mtk-msdc.0/11230000.MSDC0/by-name
on my particular phone this needs to be changed to....
/dev/block/platform/mtk-msdc.0/by-name
Click to expand...
Click to collapse
you need to update TWRP to 3.2.3 or 3.3.1.
you can download it from (from here):
https://mega.nz/file/klkxybiL#IPM8W3uu3fd7ecD0hm87FWFRVs0tG02SfEjYezNtVQw

ibilux said:
you need to update TWRP to 3.2.3 or 3.3.1.
Click to expand...
Click to collapse
I updated to 3.3.1 in the process of trying to get the rom to install. I'll give your build of TWRP a try at some point.
Nice work by the way :good:. I've not tested extensively yet, but it boots up and appears to work without any obvious problems.

Dude, THANK YOU SO MUCH for this! I am so grateful
It works flawlessly and you gave life to my old phone.
BTW does anyone know any good Camera app? Or if you can enable Camera2Api in this device?
Thank you in advance

Just confirming..
Can this be dirty flashed over android 7 LineageOS

Xrredmi said:
Dude, THANK YOU SO MUCH for this! I am so grateful
It works flawlessly and you gave life to my old phone.
BTW does anyone know any good Camera app? Or if you can enable Camera2Api in this device?
Thank you in advance
Click to expand...
Click to collapse
Footej Camera works perfectly for me. But tbh i didn't test any other camera apps. so if u found any better camera app u can share it here to the rest of users.
https://mega.nz/file/Y1EQXIiA#Z8lGV9XbrkEbEmRuAQh4NK17hgXV7WxSQ8hQGF2hJbA

lohtse said:
Just confirming..
Can this be dirty flashed over android 7 LineageOS
Click to expand...
Click to collapse
Didn't test it. it may or may not work. u can test it and share the experience.
backup your data & apps just in case, using Migrate app, and do a clean fresh flash if it didn't work.

ibilux said:
Footej Camera works perfectly for me. But tbh i didn't test any other camera apps. so if u found any better camera app u can share it here to the rest of users.
[Mega Download Link: See above]
Click to expand...
Click to collapse
Just downloaded the app, and it is pretty much better than any other had already tested.
Thank you again mate, you made my day

ibilux said:
Didn't test it. it may or may not work. u can test it and share the experience.
backup your data & apps just in case, using Migrate app, and do a clean fresh flash if it didn't work.
Click to expand...
Click to collapse
Thank you for replying
Next question
Gapps? which version??
great work thank you

Ok so dirty flash was a huge fail for me so did a clean flash and EVERYTHING works great in fact it feels like a brand new phone.. DAMN it's great again... Having used LineageOS 14 and being hugely disappointed by it this rom is a MASSIVE BREATH OF FRESH AIR.. And has actually made my RN2 USEFUL again.... Thank you for your excellent hardwork...
one questions I have
How do I change from SU to Magikdisk, ???
So happy with this rom... Thank you for everything

lohtse said:
Thank you for replying
Next question
Gapps? which version??
great work thank you
Click to expand...
Click to collapse
i never used gapps. but some user recommended using this :
http://downloads.codefi.re/jdcteam/javelinanddart/gapps/MindTheGapps-8.1.0-arm64-20180808_153856.zip

ibilux said:
i never used gapps. but some user recommended using this :
http://downloads.codefi.re/jdcteam/javelinanddart/gapps/MindTheGapps-8.1.0-arm64-20180808_153856.zip
Click to expand...
Click to collapse
thank you in the end I used the ones off the gapps website and all worked fine.

lohtse said:
thank you in the end I used the ones off the gapps website and all worked fine.
Click to expand...
Click to collapse
I also used MindTheGapps from here wiki.lineageos.org/gapps.html
MindTheGapps-8.1.0-arm64-20180808_153856.zip filedownloads.codefi.re/jdcteam/javelinanddart/gapps,
like @ibilux said
Works fine

anyone flash MAGIK and XPOSED mods yet????
Just friggin loving this rom.... only issue I have had is occassionly it disconnects from WIFI and then take a long time to reconnect... other than that all works great.
for those wanting a better camera all the following work great
manual camera fx
open camera
camera zoom fx
rectrica
bandacam
DSLR camera
all with similar results and all pretty damn good.

possible second issue
if I add or change unlock pin code... RN2 just locks up... have to pull battery out, once rebooted code has been changed and can unlock phone fine after that... seems too be the initial action of adding or changing it that causes issue.

Hello,sir will you make DotOS v2.0 too For our Xiaomi Note 2?

my sim cards don't seem to work on this rom. i've had this issue before in RR 5.8.5 and the only way to fix it is just to reboot my phone and voila, it's fixed, but in this rom it can't even read my sim cards at all
edit :
sim 1 is working as of right now. i just had to wait for it to work though the signal cluster icons don't show that it does. sim 2 is still not working
i have successfully installed both magisk and xposed. they both work like a charm thus far. i'll let you know if there's anything going on

[Z01R] SailfishOS

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SailfishOS for ASUS Zenfone 5Z by VerdandiTeam
Warning: Flashing this may void your device’s warranty, lead
to data loss, hair loss, financial loss, privacy loss, security breaches, or other damage, and therefore
must be done entirely at your own risk. No one affiliated with this project is responsible for your
actions but yourself.
Click to expand...
Click to collapse
THIS IS NOT ANDROID NOR THERE IS ANY ANDROID APP SUPPORT. GO USE GNU OR SOMETHING
Not working:
Camera recording (in progress but i wanted to share the sfos with yall already)
Use advanced camera from openrepos if you want wide angle (jolla didn't get to add it to stock camera yet)
calls are untested altho should work
GPS is untested (probably works too)
INSTALL:
Strap in for a ride, if at any step you don't know what you are doing, you better give up and stay on android. If i'm doing something incorrectly then tell me but i've been fighting over 3 days just to get lineage and twrp working… but maybe i'm just stoopid
If you can install provided lineage 17.1 on slot a then you don't need these instructions and jump to flashing sfos:
I couldn't find any valid tutorial on getting stock android 10 but i've found stock fastbootable image somewhere (yes, don't trust it lol) so i will share it with you [link]
Also lineage removed 17.1 builds but the guy was making nightlies which are still available so i also uploaded the build i'm using for archive purposes [link]
Idea is that no matter where you are coming from or if you just bought device you should get to sfos this way. And if you are wondering still yes we will be removing ALL YOUR DATA so backup it.
Flash the provided stock via fastboot (there is script and even files for QDL but i haven't tested those). It's pretty straight forward you should figure it out, if not then there is some tutorial i think on this forum or on internet, if you can't handle it then give up really you can do more damage than good.
Verify that its booting, stock will be flashed to slot a. flash and boot twrp (android 10 version, link to image, link to installer) via "fastboot flash boot twrp-3.5.2_10-1-Z01RD.img" i'm not really using windows but you should be able to figure it out already. Flash lineage 17.1 from provided link, it will flash to slot b. afterwards flash twrp installer (the zip) so that you can boot twrp (just flashing twrp on boot on slot b doesn't work GO FIGURE). Reboot, verify that lineage is booting, reboot to bootloader, select recovery, hold power button (fastboot reboot recovery only works sometimes, again GO FIGURE). you should be back in twrp on slot b. Flash lineage again as well as twrp installer so that lineage will be installed on slot a as well as twrp will be bootable. reboot, verify that lineage boots and that you are in fact on slot a. Finally we have lineage on slot a.
Sailfish flashing instructions (come here if you have lineage 17.1 on slot a):
- download rootfs
- flash/boot twrp on slot a (or slot b, i'm not even sure at this point)
- wipe everything (you need to format data, not wipe, format. data NEEDS to be unencrypted, advanced -> format data -> yes, if you didn't realize yet we are wiping EVERYTHING so backup your data)
- Install rootfs (aka sailfish, it will flash kernel onto the same slot so you don't have to worry about switching slots, at least i hope so, if it doesn't boot, get the hybris-boot.img from the zip and fastboot flash boot it onto slot a)
- Boot
- Have fun
Changelog:
STABLE 1:
Initial public release
F.A.Q.
HOW TO REPORT BUG
After bug occurs type in the terminal following commands:
/usr/libexec/droid-hybris/system/bin/logcat
devel-su dmesg
devel-su journalctl
and give me logs from there (do not paste it in the post! Use pastebin.com)
devel-su will ask you for password, you can set it in developer tools.
Contributors
Mister_Magister
Source Code: https://github.com/VerdandiTeam

Thanks for the efforts you put in to bring Sailfish OS to our device. Good work! ??

please make stable SailFish OS
i would like to use this ROM as Primary ROM

rootfs is missing... where can i find it.
i had it before and i misplaced it.
can anyone share the file with me

Hybris17 is almost ready. I'll re-port 5z on top of lineage17/hybris17 in hope of getting modem fixed. If the modem will turn out to be fixed i will push it forward as current hybris16 based port has only stereo and modem broken.
HEY ITS NOT DEAD OKAY

Mister_Magister said:
Hybris17 is almost ready. I'll re-port 5z on top of lineage17/hybris17 in hope of getting modem fixed. If the modem will turn out to be fixed i will push it forward as current hybris16 based port has only stereo and modem broken.
HEY ITS NOT DEAD OKAY
Click to expand...
Click to collapse
Cool, ping me when ready to test

Mister_Magister said:
Hybris17 is almost ready. I'll re-port 5z on top of lineage17/hybris17 in hope of getting modem fixed. If the modem will turn out to be fixed i will push it forward as current hybris16 based port has only stereo and modem broken.
HEY ITS NOT DEAD OKAY
Click to expand...
Click to collapse
If this hybris17 is not a android rom like havoc or bliss.
Then I am in for using it

Vivek Garg 001 said:
If this hybris17 is not a android rom like havoc or bliss.
Then I am in for using it
Click to expand...
Click to collapse
Hybris is library that Sailfishos uses to communicate with android side of things so it's still sailfishos just using newer android base, lineage 17 in this case

Mister_Magister said:
Hybris is library that Sailfishos uses to communicate with android side of things so it's still sailfishos just using newer android base, lineage 17 in this case
Click to expand...
Click to collapse
How many basic things are not working currently????
I just need calls , camera and wifi to work properly and Android app support is there in this os ... So when it's ready just post it please

I'm requesting the developer to develop further more to best of sailfish for the device , I want to use sailfish as a daily driver

alwinbernat said:
I'm requesting the developer to develop further more to best of sailfish for the device , I want to use sailfish as a daily driver
Click to expand...
Click to collapse
You can't request **** you don't own me
Anyway, i finally started making port based on lineage17.1/hybris17.1 lets see if i get sim to work

Vivek Garg 001 said:
How many basic things are not working currently????
I just need calls , camera and wifi to work properly and Android app support is there in this os ... So when it's ready just post it please
Click to expand...
Click to collapse
There is no android support.

Currently what is blocking me is being unable to boot twrp at all so i cannot flash lineage 17.1 and therefore i cannot flash sfos. This device is such pita…

Good news, since i got 17.1 to work, i also got port working on 17 base and mobile data (and probably calls too) are working! So now hopefully i will have 100% working port as now i only have camera left to fix. After that i will release it again

Mister_Magister said:
Good news, since i got 17.1 to work, i also got port working on 17 base and mobile data (and probably calls too) are working! So now hopefully i will have 100% working port as now i only have camera left to fix. After that i will release it again
Click to expand...
Click to collapse
grt news sar

Mister_Magister said:
Good news, since i got 17.1 to work, i also got port working on 17 base and mobile data (and probably calls too) are working! So now hopefully i will have 100% working port as now i only have camera left to fix. After that i will release it again
Click to expand...
Click to collapse
I am waiting for the release

Camera even with wide angle is working fine, i'm just fixing recording. Fingerprint doesn't want to preserve fingerptints between reboots and actdead (charging off screen) is not working

Mister_Magister said:
Camera even with wide angle is working fine, i'm just fixing recording. Fingerprint doesn't want to preserve fingerptints between reboots and actdead (charging off screen) is not working
Click to expand...
Click to collapse
Will we be getting android app support???

Vivek Garg 001 said:
Will we be getting android app support???
Click to expand...
Click to collapse
Ofcourse not, ports don't have android support

So i released the build because i was impatient. Instructions may sound difficult but if you know what you are doing then its pretty straightforward
Step 1 get provided lineage 17.1 installed on slot A
Step 2 make sure /data is unencrypted, format it
Step 3 flash sfos on slot A
Step 4 voila

[ROM][UNOFFICIAL][Android 11] LineageOS 18.1 [joyeuse/miatol][22/01/21]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 18.1 is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
We have progressed to LineageOS 18.1
Flash instructions :
Use latest pbr recovery for miatol, supports decryption - beta available here, https://pitchblackrecovery.com/joyeuse/.
DO NOT - Wipe data!, ONLY FORMAT, otherwise you may hose the phone.
There is a way to fix this without the fastboot factory clean, flash and lock with the official Xiaomi tool, which was forcing you to clean and lock... now available here: https://github.com/Szaki/XiaomiADBFastbootTools
If you hose the phone, use this tool - you need to install JRE though, as the tool is Java base. Put your phone is fastboot, use the tool to download the latest global rom (or whichever). Then go to where its downloaded, extract the .xy/tar file, then go back into the tool and under "image" select the folder INSIDE the folder you just extracted, then select "clean install" and install it. This will flash the majority of imgs but will error out at the end and be unable to create the "user data" partition.
That's okay, because all of the partitions will be setup again, and you can flash any rom you want again. So when its done, and still in fastboot, fastboot flash recovery recovery.img (recovery.img being the latest joyeuse pbr recovery, you renamed to recovery.img and were in that folder in the command prompt, so it will flash that recovery) or use the tool to select that recovery and it will flash it for you and reboot into for you if you like.
(Do this step last, after Magisk, if you want to unencrypt, no worries if you don't unencrypt - PBR recovery will decrypt your data ON THE SECOND TRY OF ENTERING YOUR SCREENLOCK PIN NUMBER...), the new PBR Miatol Beta 10/14/20, fixes this issue, it is now decrypted on the first entry of the phone's lockscreen PIN. Then flash disable_dm-verity_forceencrypt.zip available here for those who want decrypted data partition: https://zackptg5.com/android.php#disverfe and other places as well.
If you are encrypted and decide to unencrypt later, you will need to flash the disable_dm-verity_forceencrypt.zip in miatol recovery, then format data. Store roms, gapps, recoveries (just in case), disable_dm-verity, magisk install and uninstall and all that stuff on the SD card, so you can use them in PBR after you format DATA (the first step after installing PBR miatol recovery), just FYI. Then do the following:
Flash ROM
Flash OpenGAPPS for android 11 nano
Boot into android, make sure its working and install Magisk Manager 8.0.7, then reboot into recovery and install Magisk 21.4 (in recovery, I did not need to extract the boot.img and patch in Magisk Manager, and reboot into recovery to flash the patched boot.img, but your results may be different): https://github.com/topjohnwu/Magisk/releases. If you want to unencrypt (no guarantees its permanent though) you need to format data, THEN FLASH MAGISK, then flash disable_dm-verity (always the last step)- I usually wipe dalvik and cache too.
USE LATEST MIATOL PBR RECOVERY, PLEASE.
SD card issues resolved with the implementation of the EXFat android driver.
Source Code: https://github.com/LineageOS
Kernel Source: https://github.com/Redmi-SM6250 or Stock kernel from Miui
Apologies for the lack of updates, was diagnosed with stage 4 metastatic cancer and this project was not on my priority list anymore...
Update 28/1/21:
Release notes:
LineageOS
Device: Unified (Miatoll)
Developers: ScaryMen1325 & Loptr4
ROM Version: 18.1
Android Version: Android 11
Build date: 22/01/2021
Status: UNOFFICIAL
Changelog:
• Fixed power related issues
• Added useful apps (thanks to Dev: Emulond for that)
• Other fixes and performance improvements
Notes:
• It's 2nd test version, if you found bugs, give log.
• Using loki kernel by default, haven't tested custom kernel.
Download here:
https://drive.google.com/file/d/1M5-cRBfrRdBdNYGzy5G9bOa1Ncf5JkE4/view?usp=sharing
Please note this is a unified release, you should do a clean install unless you're coming from a unified ROM alreadyl.
Will keep you more regularly updated now that I'm out of the hospital....

Perfect will try tonight

Belpek said:
Perfect will try tonight
Click to expand...
Click to collapse
Have you tried it?
How is it? Good for daily?

There are so many Joyeuse LineageOS ROMs I don't even know where to start.

i don't see you mentioned mobile network in bugs section; does it work? i'll try this rom in a couple hours

Tell me please. If phone will be locked with black screen and i say "ok google". Will it work? Or it will work only if screen is unlocked?

sorry if its not much, since i can't do much on this rom. flashed nikogapps, google sign-in succeded but it seems that i cant install anything from play store.
(dumb me forgot to screenshot, it only says "something went wrong" when i try to install an app from play store)
about ok google from lockscreen/screen off, i tried it, also not working. can't confirm about volte since volte still relatively new here and hasn't developed that much.

Why nikgapps? Open gapps nano is recommended.
Sent from my Redmi Note 9 Pro using Tapatalk

Flash it and using it by now, so far so good, sometimes it gets a little freeze but nothing serious, miracast reboots phone so dunno if this is a bug or not, proximity sensor is another one cuz while I was in speaking with my pal screen was on all the time and my ear activated bluetooth and DND
Have nothing to talk about VoLTE cuz in my country is not available.
ANX modules left my phone in bootloop so instead I went for GCam. Flash unofficial opengapps nano and make sure to use Wi-Fi to complete the first run.
Magisk canary works so it can be rooted.
Keep the hard work!
*Sorry if I made some writing mistakes, english is not my native language. Cheers!!

Tried flashing the latest build (02.10.20) using the latest TWRP from the thread you linked but I get the "can't install package over new build" error. Is it required to come from stock miui?

gigahurts said:
...
Newer Build:
https://mega.nz/file/PlkgiSzS#C_tIspgbtGDrweztQ83lADHyEQf4dTkIUiSAqgjVAFk
NOTE: You should be on 11.0.7.0 QJZMIXM (EU) Global firmware for this build. Also, I have a newer build, but its not ready for primetime and has issues with SMS and Call Log enabling permissions.
Oh, and BTW, if you hose your ROM/Phone, just flash vbmeta.img in fastboot to avoid using the factory fastboot img flash, otherwise you many need to wait another 7 days to unlock the bootloader.
...
The dev for this build is: @wight554, all thanks and credit go to him, he is awesome, and I, for one, seriously appreciate this ROM as it works very well for me. It is so snappy and smooth, with a super fast boot time, no reboots and generally pretty frickin AWESOME!
...
Click to expand...
Click to collapse
First of all, thank you guys @gigahurts & @wight554 very much for working on supporting this device :good::good:
Could you pretty please confirm that you intend to continue working on this and maintain this device? I am planning to buy two joyeuse devices for daily usage and I would like to be at least partially sure I can run LineageOS on them. Also do you think the current known issues will be possible to resolve in the near-ish future? :fingers-crossed: Thanks for your reply in advance. All the best.

Swiftor said:
First of all, thank you guys @gigahurts & @wight554 very much for working on supporting this device :good::good:
Could you pretty please confirm that you intend to continue working on this and maintain this device? I am planning to buy two joyeuse devices for daily usage and I would like to be at least partially sure I can run LineageOS on them. Also do you think the current known issues will be possible to resolve in the near-ish future? :fingers-crossed: Thanks for your reply in advance. All the best.
Click to expand...
Click to collapse
hey Swiftor,
We will continue to work on this rom. LineageOS has been around a long time, development has spread across so many devices, however, the hardware of many devices is very similar, so support will continue. The last Redmi Note 8 pro, had a mediatek SOC, and made development difficult until MIUI decided to release its source. The snapdragon platform is very mature and is more easily and readily available to develop roms for. Redmi Note 10 pro has been released in India, and has a slightly better processor 765g vs 730g, but the kernel and hardware are very similar, so I development for this phone and the Note 10 pro should parallel and continue. We are working on submitting an official 18.0 release, but have to have all hardware (and software) fully functional and as close to zero bugs as possible. I predict development to continue as long as Xiaomi continues to release new MIUI roms for this device (and they continue to release roms for phones much, much older than this).
I have updated the first post with a newer release. Let me know if you have any issues and I will try to help.
Thanks for the props too

does magisk 21 work on the latest build? really excited for android 11

So this will not be compatible with curtana devices?

Thanks to all developers for this rom. Installed on Curtana with Magisk canary, I had to use Magisk props to pass safetynet. All seems to be working ok.??

everything is working perfectly and its showing charging rapidly , it was on 88% and showing 10 minutes until full
everything is completely smooth gonna keep it for my daily use

Bantryred said:
Thanks to all developers for this rom. Installed on Curtana with Magisk canary, I had to use Magisk props to pass safetynet. All seems to be working ok.
Click to expand...
Click to collapse
hi! wich props do u use for fingerprint? i can't pass safety on my joyeuse

there're few thing that you need to fix @gigahurts
1) you putting wrong kernel source. its should be this link
2) why would you mirror it when you can get it in his sourceforge

Why is today's build 590MB while all others are 1.1GB?

pwnaz said:
hi! wich props do u use for fingerprint? i can't pass safety on my joyeuse
Click to expand...
Click to collapse
Sorry for the delay, Im on Curtana so dont know if it makes a difference, but I used no. 16 - mi 10 Global(11)
I also had to hide Magisk Manager

[ROM][11.0][OFFICIAL][Vanilla & GApps]Havoc OS v4.x Sofiar

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Havoc-OS 4.x is based on AOSP, inspired by Google Pixel.​Has a refined Material Design 2 UI crafted by @SKULSHADY.​Many useful features that provide a smooth premium experience.​Just flash and enjoy...​
Founder & Lead Developer:​SKULSHADY (Anushek Prasal)​​DevOPS & Scaling:​Irongfly (Sukeerat Singh Goindi)​
If you like our work and would like to support this project then please consider donating.​
PayPal: https://www.paypal.me/ANUSHEK​
UPI: [email protected]​
Download ROM: https://havoc-os.com/device#sofiar​
About Havoc-OS: https://havoc-os.com​
Recovery: Vache's unofficial TWRP​
Magisk: https://github.com/topjohnwu/Magisk/releases​
FlameGApps: https://flamegapps.github.io/​
Official Havoc-OS Telegram Group: https://t.me/havocofficial​
Official Rav/Sofia-R-P Havoc-OS Telegram Group: https://t.me/+ioAiJwr1DKZiMjJl​
Havoc-OS Announcements Telegram Channel: https://t.me/Havoc_OS​
Code Review: https://review.havoc-os.com​
1. Download the ROM, GApps (Optional), Magisk (Optional) from the links above.​
2. Wipe System, Data, Dalvik, Cache.​
3. Flash the ROM, GApps (Optional), Magisk (Optional).​
4. Reboot and Enjoy.​
LineageOS (https://github.com/LineageOS)​
Crdroid (https://github.com/crdroidandroid)​
Pixel Experience (https://github.com/PixelExperience)​
And all the other Developers, Testers, Donators and Users.​
https://github.com/Havoc-OS​
https://github.com/Havoc-Devices​
Known Issues
• FM Radio doesn't work
• USB tethering doesn't work on first boot
• Must use android 10 vendor like other sofiar roms
• Android Auto doesn't work on android 10 vendor
• Stylus actions dies between reboots, just open it within settings
Havoc-OS, ROM for Rav/Sofia-R-P(commonly shortened to sofiar)
Devices: Sofiap (Moto G Stylus/G Pro), Sofia/Sofiar (Moto G Power/G⁸ Power), and Rav (Moto G⁸/G Fast)
Maintainer: ph4n70m
Build Type: Official
Credits
- Vache: The initial device and vendor tree
- Beetle84: Giving me a ton of help

What are the differences between this build and the last one? Maybe a change log?
This is a awesome build. I will say the launcher crashes at times but recovers fine. I also have to reboot occasionally to fix a bug in the sd card. It will randomly complain about the card not being formatted. It never occurred before departing stock. Running the Moto G Stylus 2020.
What exactly causes the stylus to die? Perhaps a script the runs an action in the Java app to jumpstart it?

temperne said:
What are the differences between this build and the last one? Maybe a change log?
This is a awesome build. I will say the launcher crashes at times but recovers fine. I also have to reboot occasionally to fix a bug in the sd card. It will randomly complain about the card not being formatted. It never occurred before departing stock. Running the Moto G Stylus 2020.
What exactly causes the stylus to die? Perhaps a script the runs an action in the Java app to jumpstart it?
Click to expand...
Click to collapse
Changelogs are done on telegram because i can't be bothered to update the xda post every month, maybe in the future ill have a github posted changelog, i remember the sd card issue being an issue that was complained about awhile back with havoc being extremely picky but i don't know what causes it, it dies because motorola uses proprietary stuff to start it in the background from what i can tell so its a bunch of manually editing the apk with apktool but the current brickwall is everything java is naturally output to smali files so you have to compile and decompile with that unless you want to try and do further processing which just leads to more issues. Its a big mess you when you look at the manifest and realize it uses the native android boot receiver stuff but seemingly not for starting the app. Eventually I'll get around to trying more things to fix it.

ph4n70m-404 said:
Changelogs are done on telegram because i can't be bothered to update the xda post every month, maybe in the future ill have a github posted changelog, i remember the sd card issue being an issue that was complained about awhile back with havoc being extremely picky but i don't know what causes it, it dies because motorola uses proprietary crap to start it in the background from what i can tell so its a bunch of manually editing the apk with apktool but the current brickwall is everything java is naturally output to smali files so you have to compile and decompile with that unless you want to try and do further processing which just leads to more issues. Its a big **** you when you look at the manifest and realize it uses the native android boot receiver crap but seemingly not for starting the app. Eventually I'll get around to trying more things to fix it.
Click to expand...
Click to collapse
Don't bother.. a reboot is fine with me as I only use the SDcard as a "backup" destination. I use FolderSync to copy all internal storage to the SDCard daily. Then I do TWRP backups once in a while for a full system backup (in theory). I have Titanium Backup but.. it is seriously out of date and needs work in my opinion.
I love all the Pixel integrations. A lot of the time my power screen shows the home automation stuff. That is working right now. Think turn off/on TVs etc.

Looks like there was an unannounced build uploaded on. 11/25/2021
So, maybe you might need to upgrade

Have you checked the SD card format?
I currently use a 64gb SD card with exFAT file system format and I have not yet been able to test the rom because I need to save a copy of my internal data to the pc or SD card and I would like to use this rom more stable.

This may sound like a dumb question, but how do I flash this? Do I use TWRP and flash both slots? Or am I supposed to do it from my computer via adb sideload? I ask this because when I flash through TWRP, it doesn't work. It just defaults to the OS I had installed prior, like if it didn't flash it at all. Please advise.

Android auto doesn't appear to work with the included gapps. Anyway to fix it? Thanks

deviousconundrum said:
This may sound like a dumb question, but how do I flash this? Do I use TWRP and flash both slots? Or am I supposed to do it from my computer via adb sideload? I ask this because when I flash through TWRP, it doesn't work. It just defaults to the OS I had installed prior, like if it didn't flash it at all. Please advise.
Click to expand...
Click to collapse
Install TWRP and when you flash it, it will flash it to the inactive slot.
If your phone is on slot A and you try to flash it, TWRP will flash it to slot B.
You can change the active slot by clicking on "Reboot" and you will see an option to change the active slot.

Was testing this rom out and was working great. But after the latest update 20220127, my phone started to connect to wifi hotspots randomly and forcibly even when I turn off wifi. Maybe it's a hardware issue but will definitely be switching back to the previous version. Overall, the latest update is faster in my experience besides that issue, thank you nice work!

I have the Moto G stylus xt-2043-4 that I just rooted with magisk and I'm not sure how to flash the rom I downloaded all the files so any help would be really appreciated thanks

[email protected] said:
I have the Moto G stylus xt-2043-4 that I just rooted with magisk and I'm not sure how to flash the rom I downloaded all the files so any help would be really appreciated thanks
Click to expand...
Click to collapse
Flash the rom zip with twrp

archtechmod said:
Flash the rom zip with twrp
Click to expand...
Click to collapse
Yeah I thought the same thing I figured I could just flash with TWRP but I don't have TWRP I wish I did so I guess they rooted without TWRP just magisk so I appreciate your response thank you again

[email protected] said:
Yeah I thought the same thing I figured I could just flash with TWRP but I don't have TWRP I wish I did so I guess they rooted without TWRP just magisk so I appreciate your response thank you again
Click to expand...
Click to collapse
Just a thought ,have you tried searching for a unofficial twrp for your moto g stylus and flashing ?That’s the solution I did then flashed this rom on my moto g stylus . With magisk included .

archtechmod said:
Just a thought ,have you tried searching for a unofficial twrp for your moto g stylus and flashing ?That’s the solution I did then flashed this rom on my moto g stylus . With magisk included
Click to expand...
Click to collapse
archtechmod said:
Just a thought ,have you tried searching for a unofficial twrp for your moto g stylus and flashing ?That’s the solution I did then flashed this rom on my moto g stylus . With magisk included .
Click to expand...
Click to collapse
No I haven't but I'm going to try and find an unofficial TWRP to give it a shot and thank you for the help I appreciate it TY

I use Arrow Os A13. Can I downgrade directly with havoc os 4.19?