{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free and open-source operating system for smartphones and tablet computers, based on the Android mobile platform.
This is an unofficial build of LineageOS for the Pixel 2 (walleye). I always liked Lineage (and its predecessor CyanogenMOD) as well as the Google line of phones. Unfortunately having a Google Pixel phone isn't certainty for a lot of custom ROMS anymore, so that's why I decided to compile my own version. It's been quite challeging, but I think I finally have a build that is good enough to share.
About
This ROM is is always built straight from the LineageOS sources found on https://github.com/lineageos. There are only 3 changes in order to get this build:
The binaries for this ROM come from AICP
GApps are compiled with the ROM from MindTheGapps including the Pixel specific bits for unlimited photo upload for instance
Disabled Android Verity Boot (AVB), so we don't get the security warning when booting
I am not a developer, I only build this ROM and it reflects the the current status. If there are any things missing or not working I suggest to contact the LineageOS team, they are the real geniuses here and deserve all the credits. I will try to keep this ROM updated on a regular basis.
First Installation
Installing the ROM can be a little hard, especially the first install. Upgrades will be relatively easy though. This first setup is only needed when coming from a different ROM then this. I can't support you if you did't follow this first installation. Be warned it will wipe your user data in the process
In order to get the initial setup and also to use the same vendor partition as the ROM you have to install the latest stock Pixel 2 image from Google found here. More info on unlocking your phone and installing the latest Pixel image can be found in the excellent post by @nathanchance found here. The bestway to flash a stock ROM in my opinion is @Deuces' script found here. The benefit of this is that it'll flash the image to both slots, so they are both on the latest build, including the bootloader and radio. All instructions for using the script are inside the forum. After flashing the image make sure you reboot at least once (no need to set it up now though).
Place the ROM and optionally the TWRP zip and root from (Magisk or from LineageOS (not tested) on the phone and reboot to recovery by using the command line (fastboot boot twrp.img)
Wipe 'data' and 'Dalvik / Art Cache' from TWRP - Wipe - Advanced Wipe. Optionally you should also delete the Android folder on your internal storage through the TWRP File Manager
Flash the ROM and optionally the TWRP zip and reboot the phone
Upgrades to new version
After the hard initial work to get the ROM installed it's going to be easy for upgrades to new versions.
Download the new ROM and reboot of flash to TWRP
Flash the new ROM and optionally TWRP. If you want to flash another kernel or a root solution you will have to reboot you phone, so it switches slots and let it boot normally. Then go back to recovery and flash in this order: TWRP - kernel - Magisk and reboot
After a monthly update from Google and only when LineageOS also adapted to the latest monthly sources (I will tell you this) you will have to do an extra step:
Download the latest Lineage OS ROM and place it on the internal storage
Download the latest image from the Google Factory Images site and run Deuces' script. No need to wipe your data!
After the script finishes it automatically boots into the bootloader. From here fastboot into TWRP and flash the previously downloaded new ROM, optionally followed by TWRP.
Optionally, after a reboot you can flash Magisk and/or another kernel.
Not working
Substratum
Use Powerbutton for flashlight when Ambient Display is set
Active Edge
Now playing
Downloads
I'm not maintaining this project anymore, download link has been removed.
Happy flashing
Miraculous... Will flash soon. Thank you for keeping Pixel 2 relevant.
Is link not posted yet?
I want to thank you for posting. But, I get the feeling this will just be closed as well really soon. Hope this sticks around, because XDA is not what it use to be, at all!
JCBiznatch said:
I want to thank you for posting. But, I get the feeling this will just be closed as well really soon. Hope this sticks around, because XDA is not what it use to be, at all!
Click to expand...
Click to collapse
Why would it be closed?
JCBiznatch said:
I want to thank you for posting. But, I get the feeling this will just be closed as well really soon. Hope this sticks around, because XDA is not what it use to be, at all!
Click to expand...
Click to collapse
I completely agree...
Any chance for an MD5
jascolli said:
Any chance for an MD5
Click to expand...
Click to collapse
Added in the same folder:
MD5: a28cd4f3cabe627fbe99cbe1485cba3f
TCUofficial said:
Why would it be closed?
Click to expand...
Click to collapse
I don't have a clue. It just seems that anyone who posts a ROM gets the thread closed. It's almost as if they don't want walleye to have any development.
Just check this forum out compared to the pixel XL 2 forum.
Thanks very much for sharing this. I've got it installed and it's running fantastic.
Everyone who has had a rom thread has closed the thread for different reasons, time, family, frustration or lack of support etc...
I see don't see why we should be negative and assumee the same is the case with this build. Every rom thread has produced better and more stable builds as time progressed.
@Joregen2009, I have seen your name around before, appreciate you building!!
razrlover said:
Everyone who has had a rom thread has closed the thread for different reasons, time, family, frustration or lack of support etc...
I see don't see why we should be negative and assumee the same is the case with this build. Every rom thread has produced better and more stable builds as time progressed.
@Joregen2009, I have seen your name around before, appreciate you building!!
Click to expand...
Click to collapse
It's my pleasure. I only wanted to share my build, because I know that many of you much be as frustrated as me for the lack of ROMs for our device.
We'll see how long this thread will hold. If it's up to me I'll try to provide at least a weekly build from the actual sources, or whenever there are some major changes in the sources that are important for our device until the Lineage Team declares our device official. Let's hope that happens soon and that this thread can contribute to that.
Awesome! Thanks for this ROM. Any known issues one should be aware of before flashing?
Does Lineage have Substratum support ?? Having trouble connecting......
Update. Found answer - : no substratum support
@jorgen2009
Hey thanks so much for the ROM. Its working great!
Is there any chance you could link me the kernel source for this specific build? (Pixel2)
I'm trying to figure out how to rebuild it with the drivers for my TP-LINK WN722N V1.
I really don't know what I'm doing but I'm trying to learn.
I'm trying to follow this guide to accomplish this.
https://forum.xda-developers.com/showthread.php?t=2338179
I do have Kali for Magisk up and running just fine.
Lsusb command shows my WiFi Adaptor but the kernel won't let me use it.
Thanks so much for reading, if what I'm trying to do is stupid feel free to let me know why haha. If I get it to work I'll share it with everyone.
redsmith said:
Awesome! Thanks for this ROM. Any known issues one should be aware of before flashing?
Click to expand...
Click to collapse
The only thing that I am aware of is the fact that the battery LED isn't working, but that will be solved in the next build
tkacer said:
Does Lineage have Substratum support ?? Having trouble connecting......
Update. Found answer - : no substratum support
Click to expand...
Click to collapse
Sorry, than I fear it's not supported by LineageOS in general yet, I don't use it myself
gahndii said:
@jorgen2009
Is there any chance you could link me the kernel source for this specific build? (Pixel2)
Click to expand...
Click to collapse
Sure, see LineageOS sources on github, I didn't touch the kernel in this build:
https://github.com/LineageOS/android_kernel_google_wahoo
I am still getting the security warning when booting. Am I the only one so I missed something?
Other question: is the Trusted Faces not working because the used GApps package has not been modified for the Pixel, or the ROM has got some incompatibility issue?
Great job. Just a little bug: Long press power button to turn on torch is not working when Ambient Display is set to always on.
banciii said:
I am still getting the security warning when booting. Am I the only one so I missed something?
Other question: is the Trusted Faces not working because the used GApps package has not been modified for the Pixel, or the ROM has got some incompatibility issue?
Click to expand...
Click to collapse
Are you sure you are on the April vendor? Your vendor version must be the same as the ROM needs (currently the April one).
Trusted Faces is GApps related yes, it's not in MindTheGApps. I'll try to make a build with OpenGApps in to see if that works. Both Face Detection for Media and Face Unlock are in the Nano package (https://github.com/opengapps/opengapps/wiki/Nano-Package)
redsmith said:
Great job. Just a little bug: Long press power button to turn on torch is not working when Ambient Display is set to always on.
Click to expand...
Click to collapse
I'll put it in the known issues list in the OP later this week for an overview
Another build is up. This time I used OpenGapps so you might need to clear the Store cache. I had no problems upgrading myself. The Text-to-speech improved a lot with these Gapps for me.
New in this build is the LED light when charging and some basic stuff for more compatibility with our device and some networks. Also all the normal changes since the last build for LineageOS are in of course. For the download link see the OP. I also adjusted the OP a bit to show the things that are known not to work. Let me know if I missed something so I can adjust the list
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of android, which is designed to increase performance and reliability over stock android for your device.
All the source code for LineageOS is available in the LineageOS Github repo. If you would like to contribute to LineageOS, please visit our Wiki.
Important Info
To flash this rom you need TWRP 3.2.0-0 or newer. https://twrp.me/huawei/huaweinexus6p.html
Make sure you have the radio & bootloader img's installed from the stock oreo 8.1 OPM7.181205.001 Dec 2018 factory image.
They can be extracted from the factory image on google's site here. Or you can use the ones linked below that I already extracted:
radio & bootloader img's: https://androidfilehost.com/?w=files&flid=286833
Those img's can be flashed with fastboot command.
Note: There's an issue happening to some angler users on custom oreo roms. The first boot after flashing rom your sim card might not be detected. It's easy to fix. Just go to lockscreen security settings and change it to 'none' and then reboot. Then you can change it back to whatever you want. This only happens one time when you first flash oreo.
Download Links
rom: https://download.lineageos.org/angler
Note: LineageOS servers no longer make 15.1 builds for any devices. You can use my unofficial builds here. My older builds are here.
Note#2: if you want to switch from an official build to my unofficial builds, follow instructions here.
google apps (optional): https://wiki.lineageos.org/gapps.html (Use arm64 / 8.1)
root su addon (optional): https://download.lineageos.org/extras Note: Use arm64 15.1 zip. After installing the su addon, you can enable root in developer options.
Instructions
If updating from old unofficial to newer unofficial, follow the steps below:
1. if you don't already have them installed, flash the newest radio and bootloader img's linked above.
2. boot into twrp and flash the rom zip.
Reboot & enjoy.
NOTE: if you previously flashed gapps and/or the su addon, there's no need to flash them again. They will be automatically re-installed during rom zip installation.
NOTE2: if you want to switch from an official build to my unofficial builds, follow instructions here.
If coming from a different rom:
1. if you don't already have them installed, flash the newest radio & bootloader img's linked above. also make sure you have the newest twrp, linked above.
2. boot into twrp and wipe system & data & cache.
3. flash rom & gapps & su addon zips (gapps & su zips are optional).
Reboot & enjoy.
Weather Provider Addon (Optional)
For those that like the lineage cLock widget, here's the OpenWeather apk you need to get weather info.
https://download.lineageos.org/extras
Grab the one for version 16.0. It also works with 15.1.
Note: You'll need an api key from OpenWeather.
LineageOS Stats
https://stats.lineageos.org/
Credits
Many thanks to my fellow LineageOS team members and all the contributors out there in the community. :good:
LineageOS device maintainers:
sam3000, razorloves
Source Code:
Device tree: https://github.com/LineageOS/android_device_huawei_angler/tree/lineage-15.1
Kernel tree: https://github.com/LineageOS/android_kernel_huawei_angler/tree/lineage-15.1
Vendor tree: https://github.com/TheMuppets/proprietary_vendor_huawei/tree/lineage-15.1
Android version: 8.1.0 Oreo
Kernel version: Linux 3.10.73
Wooh! First!
Sent from my Nexus 6P using XDA Labs
Hey Razor. I used to be on your builds a couple of years ago in the old hammerhead and looking forward to flash your work again when 15.1 is out, this time on angler. Cheers! :fingers-crossed:
Any bugs? Is it suitable for daily driver? Just tired to wait for official build and want to flash as fast as possible. )
Thanks Razorl!!!!!
Error 7 -- make sure to flash the new twrp recovery if you face this issue!!
i42o said:
ERROR 7
Click to expand...
Click to collapse
Try reading the big bright red letters at the top, under "IMPORTANT INFO"
razorloves said:
Try reading the big bright red letters at the top, under "IMPORTANT INFO"
Click to expand...
Click to collapse
haha. Yeah my bad bro, my bad. got it tho, thanks!
Says no SIM card
Clean flash following instructions, TWRP 3.2, latest bootloader/radio/vendor, flashed vendor -> rom -> gapps. Otherwise no errors.
Any suggestions?
telefantastik said:
Says no SIM card
Click to expand...
Click to collapse
Forgot to mention in the first post. This has been happening on many custom ROMs.
An easy fix is to go to security settings and change screen lock to swipe or none, then reboot. That will remove the device protection that caused the no sim problem.
After the reboot, the problem is fixed and won't happen anymore. Then you can go back into security settings and change it back to whatever screen lock option you want.
razorloves said:
Forgot to mention in the first post. This has been happening on many custom ROMs.
An easy fix is to go to security settings and change screen lock to swipe or none, then reboot. That will remove the device protection that caused the no sim problem.
After the reboot, the problem is fixed and you can go back into security settings and change it back to whatever screen lock option you want.
Click to expand...
Click to collapse
It's weird though. I have unlock protection and got no issue when flashing this.
Can it also be related to your carrier or something?
ChemoNL said:
I have unlock protection and got no issue
Click to expand...
Click to collapse
Its not just caused by unlock protection. I posted details on the issue in my 14.1 thread about a month ago.
razorloves said:
Forgot to mention in the first post. This has been happening on many custom ROMs.
An easy fix is to go to security settings and change screen lock to swipe or none, then reboot. That will remove the device protection that caused the no sim problem.
After the reboot, the problem is fixed and won't happen anymore. Then you can go back into security settings and change it back to whatever screen lock option you want.
Click to expand...
Click to collapse
Awesome, it worked! Thanks
For those interested...
Another new version of twrp came out yesterday. 3.2.1-0
Here's the changelog for it https://twrp.me/site/update/2017/12/09/twrp-3.2.1-0-released.html
You can download it here: https://twrp.me/huawei/huaweinexus6p.html
Here's the changelog for 3.2.0-0 that came out last week, incase you missed it.
https://twrp.me/site/update/2017/12/01/twrp-3.2.0-0-released.html
Thank you for new thread and ROM.
:fingers-crossed::fingers-crossed::fingers-crossed:
Hi, looking to potentially begin using custom ROMs on my 6P to help combat some battery and performance issues I get. With future updates, do I have to keep manually flashing the radio, etc firmware or can I just OTA/DL zip of lineage and flash? Seems like a bit of a pain :/
domacikolaci said:
Hi, looking to potentially begin using custom ROMs on my 6P to help combat some battery and performance issues I get. With future updates, do I have to keep manually flashing the radio, etc firmware or can I just OTA/DL zip of lineage and flash? Seems like a bit of a pain :/
Click to expand...
Click to collapse
Hi, once a month you need to flash the new vendor for security updates
Google release them once a month (usually the first tuesday of the month)
However when you flash an update that does not require new vendor, you don't need to flash it
edit: just realised you're also from Melbourne, hi
Just have installed the last unofficial in my Angler, coming from another custom rom ( with Nougat). All good. Plan to stay here. Thanks !
Anyone having problems with the phone shutting down saying 0% battery when in reality you still have plenty of battery left? Just did a clean install and it happened after only installing chrome and whatsapp.
Apoena said:
Anyone having problems with the phone shutting down saying 0% battery when in reality you still have plenty of battery left? Just did a clean install and it happened after only installing chrome and whatsapp.
Click to expand...
Click to collapse
Have you been living under a rock for the past year? Lol jk. But see here http://www.androidpolice.com/2016/1...toff-problem-and-its-becoming-a-safety-issue/
tldr; blame Google and Huawei. And get yourself a free replacement or free upgrade.
http://www.androidpolice.com/2017/0...exus-6p-owners-pixel-xl-warranty-replacement/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look, build, and use our code at CarbonROM's GitHub...
Disclaimer:
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! These builds are experimental and can contain Bugs (as listed above). Make sure to do backups.
Support:
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Join our Discord server or Telegram group! There, you can connect with other Carbon users and our developers, and you can get quicker responses to your bug reports. The invite link is right below.
Download
Join the CarbonROM Discord server
Meet us on Telegram
Homepage
GitHub
Kernel source
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
XDA:DevDB Information
CarbonROM, ROM for the Google Pixel 2 XL
Contributors
Myself5, CarbonROM
Source Code: https://github.com/CarbonROM
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Nightly
Created 2019-04-09
Last Updated 2019-08-28
Fyi your post isn't loading on the XDA app.
gforceriders said:
Fyi your post isn't loading on the XDA app.
Click to expand...
Click to collapse
Shows up fine on the XDA labs app :good:
Badger50 said:
Shows up fine on the XDA labs app :good:
Click to expand...
Click to collapse
After you posted now it's working lol. Strange man strange. Carry on with flashing peeps.
Rock on brother! Be flashing this next week when back from my cruise!!
What gapps do you recommend for this ROM. It has been a while since I ran carbon.
gforceriders said:
Fyi your post isn't loading on the XDA app.
Click to expand...
Click to collapse
gforceriders said:
After you posted now it's working lol. Strange man strange. Carry on with flashing peeps.
Click to expand...
Click to collapse
Haha, weird things.
encephalon9986 said:
What gapps do you recommend for this ROM. It has been a while since I ran carbon.
Click to expand...
Click to collapse
I recommend OpenGapps.
Flashing procedure is
Flash Carbon
Flash TWRP
Reboot to recovery (this switches slots, it's important)
Flash GApps
Done
is anyone else having trouble with Gboard themes on this ROM? If I pick a gradient theme it just hangs and crashes.
I flashed this with Mini gapps first and had a hard time getting through setup, tried again with pico with more success.
Edmontonchef said:
is anyone else having trouble with Gboard themes on this ROM? If I pick a gradient theme it just hangs and crashes.
I flashed this with Mini gapps first and had a hard time getting through setup, tried again with pico with more success.
Click to expand...
Click to collapse
I flashed the micro package and can't even get past checking for updates. The data transfer tool keeps just keeps crashing.
Edit: Tried flashing the pico package instead and now device health services keeps crashing.
Has anyone tried razorloves' MindTheGapps package?
https://androidfilehost.com/?fid=1395089523397912604
Myself5 said:
Haha, weird things.
I recommend OpenGapps.
Flashing procedure is
Flash Carbon
Flash TWRP
Reboot to recovery (this switches slots, it's important)
Flash GApps
Done
Click to expand...
Click to collapse
How to flash if I only want twrp temporary? Same way?
omair2005 said:
How to flash if I only want twrp temporary? Same way?
Click to expand...
Click to collapse
Leave out the "Flash TWRP" part and replace "reboot to recovery" with "reboot to bootloader and boot the twrp image"
Not judging but simply confused...
I see people not wanting to install twrp and it just makes no sense to me why I would want to limit my options and functionality.
It's been like almost a year since twrp had been totally stable for me with no decryption or touch issues.
Again, what is it folks are afraid of??
I'm digging how clean and fast this ROM is. Hopefully you get your server issues resolved soon.
Trying this out again! Carbon was the first ROM I've ever used on my Pixel 2 XL and absolutely loved the experience.
Edmontonchef said:
I'm digging how clean and fast this ROM is. Hopefully you get your server issues resolved soon.
Click to expand...
Click to collapse
So do I... We already have a new host because we're fed up with the old one. Currently waiting for the old one to finally answer our support ticket and bring the server back on so we can move our data to the new server and can call it a day with the old host.
Has anyone tried installing NanoDroid with this?
I went from factory image -> flash rom -> flash twrp -> reboot recovery -> flash magisk -> flash full nanodroid.zip
This leads to a bootloop until it boots back into recovery
When I try to set up any password, it does not let me proceed after the second test. Confirm gets grayed out
Bilge656 said:
Has anyone tried installing NanoDroid with this?
I went from factory image -> flash rom -> flash twrp -> reboot recovery -> flash magisk -> flash full nanodroid.zip
This leads to a bootloop until it boots back into recovery
Click to expand...
Click to collapse
The issue here would be magisk. You usually need to boot to the system at least once before you can sucessfully flash Magisk. Don't know the reasons but it's seems to be an ongoing theme on A/B devices. Same happens on my OP6 and 6T
Myself5 said:
The issue here would be magisk. You usually need to boot to the system at least once before you can sucessfully flash Magisk. Don't know the reasons but it's seems to be an ongoing theme on A/B devices. Same happens on my OP6 and 6T
Click to expand...
Click to collapse
So theoretically I need flash the rom in 'A,' flash magisk on 'B', boot into the system once, reboot recovery into 'B,' and then install nanodroid?
Edit: Well I ignored Magisk and rebooted to recovery to install nanodroid after rom installation and it booted back into recovery unfortunately.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About Us (Quoting the DU Team):
Dirty Unicorns is an AOSP based project built to enhance the stock Android experience.
Our focus has been and is always to contribute back to the community. That is ultimately why we do what we do.
We DO NOT accept, nor ask, for donations. We do not believe in that. Everything that is necessary to keep this project going comes out of our own pocket. This includes, but is not limited to; Devices, Gerrit, our websites and services, etc.. The only thing that we ask in return is that you have patience, search the thread for answers prior to posting, read diligently, and try to enjoy the process with us!
About This Unofficial Build:
Majority of the credit for this ROM goes to the Dirty Unicorns team.
Since this is an unofficial build, do not expect any support from the DU team.
Builds will follow the official Dirty Unicorn ROM releases
Unless otherwise specified, the features in the ROM will be functionally identical to the official Dirty Unicorns ROM releases. No device specific feature requests will be accepted.
My time is fairly limited, so, while I will respond to posts/PMs, it might occasionally be a few days before I respond.
Kernel Source:
https://github.com/DirtyUnicorns/android_kernel_google_bluecross
Flashing Instructions:
Flashing DU
Download boot.img and ROM zip
Reboot into bootloader and flash the boot.img
Code:
fastboot flash --slot all boot boot.img
Reboot to recovery
Go to recovery select factory reset
Select Apply update from ADB to flash the zip
Code:
adb sideload nameofbuild.zip
Reboot and ENJOY!
Updating DU
Download ROM zip
Reboot into recovery and select Apply update from ADB to flash the zip
Code:
adb sideload nameofbuild.zip
Reboot system now and ENJOY!
**This IS NOT an officially supported device. Support is not promised or guaranteed**
**If you use Xposed, please don't bother reporting any bugs**
**If you use another kernel, please don't bother reporting any bugs**
**If you fail to follow these instructions, please don't bother reporting any bugs**
Download Links:
Build(s) - Sargo
Other Links::
ROM Source - https://github.com/DirtyUnicorns
Device Source - https://github.com/craigacgomez/du_android_device_google / https://github.com/craigacgomez/android_vendor_google
Gerrit - http://gerrit.dirtyunicorns.com
Crowdin (translations) - https://crowdin.net/project/dirtyunicorns
Changelogs - https://github.com/DirtyUnicorns/android_packages_apps_DU-Changelog/tree/jsons/official
XDA:DevDB Information
Dirty Unicorns, ROM for the Google Pixel 3a
Contributors
craigacgomez, NYCHitman1, jbats
Source Code: https://github.com/DirtyUnicorns
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 14.7
Stable Release Date: 2020-09-14
Created 2020-08-08
Last Updated 2020-09-14
Thanks for the great work
I can't wait to flash this and try it out!
Does anyone have any information about the battery life on DU compared to stock or another rom?
Also, is it rooted by default?
Thanks for bringing this rom to the Pixel 3a!
k4zz said:
Does anyone have any information about the battery life on DU compared to stick or another rom?
Click to expand...
Click to collapse
Battery life is subjective and depends on too many variables. That being said, battery life on DU is leat least quivalent, but should be better than stock.
k4zz said:
Also, is it rooted by default?
Click to expand...
Click to collapse
It's not rooted by default, but you may use Magisk if you want root.
craigacgomez said:
Battery life is subjective and depends on too many variables. That being said, battery life on DU is leat least quivalent, but should be better than stock.
It's not rooted by default, but you may use Magisk if you want root.
Click to expand...
Click to collapse
Thank you very much for the prompt response. I'm excited to try this one out. Is there a feature list posted somewhere for this ROM, or DU in general?
Thanks again for your work and support
Sent from my Pixel 3a using Tapatalk
k4zz said:
Thank you very much for the prompt response. I'm excited to try this one out. Is there a feature list posted somewhere for this ROM, or DU in general?
Thanks again for your work and support
Click to expand...
Click to collapse
A few core features
1. Customisable Active Edge support
2. Themes (accents, fonts, icon shapes, schedules, backup/restore)
3. Lock screen clock formats
4. Advanced power menu
5. Heads-up notifications and screen off animations
6. Battery icons and percentage
7. Status bar clock, icon and carrier label customisation
8. QS customisations
9. Traffic indicators
10. Navigation customisation (arrow keys, long press/swipe, pulse graphical equaliser)
11.. HW buttons playback controls
12. Upstream 4.14 kernel
And a whole lot of optimisations and fixes over AOSP (https://github.com/DirtyUnicorns/android_packages_apps_DU-Changelog/tree/jsons/official)
craigacgomez said:
Flashing Instructions:
If you have a device that uses TWRP
Verify that you're using the latest version of TWRP
Perform a FULL WIPE: (A full wipe is when you wipe system/data/cache/dalvik)
Flash the latest version of this ROM
Reboot and ENJOY!
Click to expand...
Click to collapse
I see you list instructions for flashing with a device with TWRP, does this mean if I flash back to Android 9 and install TWRP, that I can then run this ROM and TWRP even though its based on Android 10?
Joe333x said:
I see you list instructions for flashing with a device with TWRP, does this mean if I flash back to Android 9 and install TWRP, that I can then run this ROM and TWRP even though its based on Android 10?
---------- Post added at 01:11 AM ---------- Previous post was at 01:03 AM ----------
I see you list instructions for flashing with a device with TWRP, does this mean if I flash back to Android 9 and install TWRP, that I can then run this ROM and TWRP even though its based on Android 10?
Click to expand...
Click to collapse
No. That is only intended for devices that have TWRP support for Android 10.
craigacgomez said:
No. That is only intended for devices that have TWRP support for Android 10.
Click to expand...
Click to collapse
Damn thanks was hoping! I dont want to give up TWRP!
Hey thanks.
When I fastboot flash the boot.img, can I just initially use the magisk-patched version you've provided in your files there, in lieu of the plain boot.img? Would that save me some effort of setting up magisk afterwards, and I could boot into an already-rooted ROM?
blksith0 said:
Hey thanks.
When I fastboot flash the boot.img, can I just initially use the magisk-patched version you've provided in your files there, in lieu of the plain boot.img? Would that save me some effort of setting up magisk afterwards, and I could boot into an already-rooted ROM?
Click to expand...
Click to collapse
For the first flash / clean flash, don't use the Magisk patched boot image. Let the device boot up once after the sideload. You can reboot before running the setup and flash the Magisk patched boot image and then continue the setup. And you'll have to install MagiskManager after the device setup. It will ask you to reboot once.
For updates / dirty flash, you can sideload the ROM, reboot to bootloader and flash the Magisk patched boot image and then reboot to retain Magisk
This may be a very dumb question, but in terms of raw code, what is the difference between a rom for the Pixel 3a / Pixel 3a XL? Except the screen and the battery, the devices do not differ...wouldn't the DU Pixel 3a XL rom work as well?
Thanks for the rom - downloading it right now
Edit: I seem to have an issue with the first time wizard - it finds my wifi, but is somehow stuck. I've skipped it, but can't restore anything from my google backups...
ROM seems to be running quite good however
david320te said:
This may be a very dumb question, but in terms of raw code, what is the difference between a rom for the Pixel 3a / Pixel 3a XL? Except the screen and the battery, the devices do not differ...wouldn't the DU Pixel 3a XL rom work as well?
Thanks for the rom - downloading it right now
Edit: I seem to have an issue with the first time wizard - it finds my wifi, but is somehow stuck. I've skipped it, but can't restore anything from my google backups...
ROM seems to be running quite good however
Click to expand...
Click to collapse
The devices are nearly identical, and ROMs are likely mostly cross-compatible, but there are subtle differences like some of the configs... Screen and power to name a few.
The setup wizard works fine on both WiFi and mobile data. But I also don't know what you mean by "stuck". Does it connect to your WiFi networks? Have you tried it with your mobile data?
It just stays at the initial "Checking for Updates...". Yes, both LTE and WiFi are connected and i've tried it with both. I can just skip all of it and have been able to restore a backup afterwards
I have to say, it's a pretty amazing rom...i've got roughly 7 hours of SoT, a ton of standby, reception is good (i wish it would stay a bit longer on LTE, before switching over to Edge)
david320te said:
It just stays at the initial "Checking for Updates...". Yes, both LTE and WiFi are connected and i've tried it with both. I can just skip all of it and have been able to restore a backup afterwards
I have to say, it's a pretty amazing rom...i've got roughly 7 hours of SoT, a ton of standby, reception is good (i wish it would stay a bit longer on LTE, before switching over to Edge)
Click to expand...
Click to collapse
I've fixed the WiFi issue. I will post the update soon.
New build date 2020-08-16 uploaded. This fixes the WiFi issue where the device sometimes does not connect to a WiFi network and hangs. No other changes since the 2020-08-08 build.
Thank you for keeping the 3a alive with a custom rom!
craigacgomez said:
New build date 2020-08-16 uploaded. This fixes the WiFi issue where the device sometimes does not connect to a WiFi network and hangs. No other changes since the 2020-08-08 build.
Click to expand...
Click to collapse
craigacgomez said:
New build date 2020-08-16 uploaded. This fixes the WiFi issue where the device sometimes does not connect to a WiFi network and hangs. No other changes since the 2020-08-08 build.
Click to expand...
Click to collapse
@craigacgomez what was the change? I want to apply it to my personal build.
craigacgomez said:
New build date 2020-08-16 uploaded. This fixes the WiFi issue where the device sometimes does not connect to a WiFi network and hangs. No other changes since the 2020-08-08 build.
Click to expand...
Click to collapse
Thanks, will wipe the device in the next few days and try the setup again
david320te said:
Thanks, will wipe the device in the next few days and try the setup again
Click to expand...
Click to collapse
No need to wipe. You can just update like normal and it'll work fine
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 18.1 is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
We have progressed to LineageOS 18.1
Flash instructions :
Use latest pbr recovery for miatol, supports decryption - beta available here, https://pitchblackrecovery.com/joyeuse/.
DO NOT - Wipe data!, ONLY FORMAT, otherwise you may hose the phone.
There is a way to fix this without the fastboot factory clean, flash and lock with the official Xiaomi tool, which was forcing you to clean and lock... now available here: https://github.com/Szaki/XiaomiADBFastbootTools
If you hose the phone, use this tool - you need to install JRE though, as the tool is Java base. Put your phone is fastboot, use the tool to download the latest global rom (or whichever). Then go to where its downloaded, extract the .xy/tar file, then go back into the tool and under "image" select the folder INSIDE the folder you just extracted, then select "clean install" and install it. This will flash the majority of imgs but will error out at the end and be unable to create the "user data" partition.
That's okay, because all of the partitions will be setup again, and you can flash any rom you want again. So when its done, and still in fastboot, fastboot flash recovery recovery.img (recovery.img being the latest joyeuse pbr recovery, you renamed to recovery.img and were in that folder in the command prompt, so it will flash that recovery) or use the tool to select that recovery and it will flash it for you and reboot into for you if you like.
(Do this step last, after Magisk, if you want to unencrypt, no worries if you don't unencrypt - PBR recovery will decrypt your data ON THE SECOND TRY OF ENTERING YOUR SCREENLOCK PIN NUMBER...), the new PBR Miatol Beta 10/14/20, fixes this issue, it is now decrypted on the first entry of the phone's lockscreen PIN. Then flash disable_dm-verity_forceencrypt.zip available here for those who want decrypted data partition: https://zackptg5.com/android.php#disverfe and other places as well.
If you are encrypted and decide to unencrypt later, you will need to flash the disable_dm-verity_forceencrypt.zip in miatol recovery, then format data. Store roms, gapps, recoveries (just in case), disable_dm-verity, magisk install and uninstall and all that stuff on the SD card, so you can use them in PBR after you format DATA (the first step after installing PBR miatol recovery), just FYI. Then do the following:
Flash ROM
Flash OpenGAPPS for android 11 nano
Boot into android, make sure its working and install Magisk Manager 8.0.7, then reboot into recovery and install Magisk 21.4 (in recovery, I did not need to extract the boot.img and patch in Magisk Manager, and reboot into recovery to flash the patched boot.img, but your results may be different): https://github.com/topjohnwu/Magisk/releases. If you want to unencrypt (no guarantees its permanent though) you need to format data, THEN FLASH MAGISK, then flash disable_dm-verity (always the last step)- I usually wipe dalvik and cache too.
USE LATEST MIATOL PBR RECOVERY, PLEASE.
SD card issues resolved with the implementation of the EXFat android driver.
Source Code: https://github.com/LineageOS
Kernel Source: https://github.com/Redmi-SM6250 or Stock kernel from Miui
Apologies for the lack of updates, was diagnosed with stage 4 metastatic cancer and this project was not on my priority list anymore...
Update 28/1/21:
Release notes:
LineageOS
Device: Unified (Miatoll)
Developers: ScaryMen1325 & Loptr4
ROM Version: 18.1
Android Version: Android 11
Build date: 22/01/2021
Status: UNOFFICIAL
Changelog:
• Fixed power related issues
• Added useful apps (thanks to Dev: Emulond for that)
• Other fixes and performance improvements
Notes:
• It's 2nd test version, if you found bugs, give log.
• Using loki kernel by default, haven't tested custom kernel.
Download here:
https://drive.google.com/file/d/1M5-cRBfrRdBdNYGzy5G9bOa1Ncf5JkE4/view?usp=sharing
Please note this is a unified release, you should do a clean install unless you're coming from a unified ROM alreadyl.
Will keep you more regularly updated now that I'm out of the hospital....
Perfect will try tonight
Belpek said:
Perfect will try tonight
Click to expand...
Click to collapse
Have you tried it?
How is it? Good for daily?
There are so many Joyeuse LineageOS ROMs I don't even know where to start.
i don't see you mentioned mobile network in bugs section; does it work? i'll try this rom in a couple hours
Tell me please. If phone will be locked with black screen and i say "ok google". Will it work? Or it will work only if screen is unlocked?
sorry if its not much, since i can't do much on this rom. flashed nikogapps, google sign-in succeded but it seems that i cant install anything from play store.
(dumb me forgot to screenshot, it only says "something went wrong" when i try to install an app from play store)
about ok google from lockscreen/screen off, i tried it, also not working. can't confirm about volte since volte still relatively new here and hasn't developed that much.
Why nikgapps? Open gapps nano is recommended.
Sent from my Redmi Note 9 Pro using Tapatalk
Flash it and using it by now, so far so good, sometimes it gets a little freeze but nothing serious, miracast reboots phone so dunno if this is a bug or not, proximity sensor is another one cuz while I was in speaking with my pal screen was on all the time and my ear activated bluetooth and DND
Have nothing to talk about VoLTE cuz in my country is not available.
ANX modules left my phone in bootloop so instead I went for GCam. Flash unofficial opengapps nano and make sure to use Wi-Fi to complete the first run.
Magisk canary works so it can be rooted.
Keep the hard work!
*Sorry if I made some writing mistakes, english is not my native language. Cheers!!
Tried flashing the latest build (02.10.20) using the latest TWRP from the thread you linked but I get the "can't install package over new build" error. Is it required to come from stock miui?
gigahurts said:
...
Newer Build:
https://mega.nz/file/PlkgiSzS#C_tIspgbtGDrweztQ83lADHyEQf4dTkIUiSAqgjVAFk
NOTE: You should be on 11.0.7.0 QJZMIXM (EU) Global firmware for this build. Also, I have a newer build, but its not ready for primetime and has issues with SMS and Call Log enabling permissions.
Oh, and BTW, if you hose your ROM/Phone, just flash vbmeta.img in fastboot to avoid using the factory fastboot img flash, otherwise you many need to wait another 7 days to unlock the bootloader.
...
The dev for this build is: @wight554, all thanks and credit go to him, he is awesome, and I, for one, seriously appreciate this ROM as it works very well for me. It is so snappy and smooth, with a super fast boot time, no reboots and generally pretty frickin AWESOME!
...
Click to expand...
Click to collapse
First of all, thank you guys @gigahurts & @wight554 very much for working on supporting this device :good::good:
Could you pretty please confirm that you intend to continue working on this and maintain this device? I am planning to buy two joyeuse devices for daily usage and I would like to be at least partially sure I can run LineageOS on them. Also do you think the current known issues will be possible to resolve in the near-ish future? :fingers-crossed: Thanks for your reply in advance. All the best.
Swiftor said:
First of all, thank you guys @gigahurts & @wight554 very much for working on supporting this device :good::good:
Could you pretty please confirm that you intend to continue working on this and maintain this device? I am planning to buy two joyeuse devices for daily usage and I would like to be at least partially sure I can run LineageOS on them. Also do you think the current known issues will be possible to resolve in the near-ish future? :fingers-crossed: Thanks for your reply in advance. All the best.
Click to expand...
Click to collapse
hey Swiftor,
We will continue to work on this rom. LineageOS has been around a long time, development has spread across so many devices, however, the hardware of many devices is very similar, so support will continue. The last Redmi Note 8 pro, had a mediatek SOC, and made development difficult until MIUI decided to release its source. The snapdragon platform is very mature and is more easily and readily available to develop roms for. Redmi Note 10 pro has been released in India, and has a slightly better processor 765g vs 730g, but the kernel and hardware are very similar, so I development for this phone and the Note 10 pro should parallel and continue. We are working on submitting an official 18.0 release, but have to have all hardware (and software) fully functional and as close to zero bugs as possible. I predict development to continue as long as Xiaomi continues to release new MIUI roms for this device (and they continue to release roms for phones much, much older than this).
I have updated the first post with a newer release. Let me know if you have any issues and I will try to help.
Thanks for the props too
does magisk 21 work on the latest build? really excited for android 11
So this will not be compatible with curtana devices?
Thanks to all developers for this rom. Installed on Curtana with Magisk canary, I had to use Magisk props to pass safetynet. All seems to be working ok.??
everything is working perfectly and its showing charging rapidly , it was on 88% and showing 10 minutes until full
everything is completely smooth gonna keep it for my daily use
Bantryred said:
Thanks to all developers for this rom. Installed on Curtana with Magisk canary, I had to use Magisk props to pass safetynet. All seems to be working ok.
Click to expand...
Click to collapse
hi! wich props do u use for fingerprint? i can't pass safety on my joyeuse
there're few thing that you need to fix @gigahurts
1) you putting wrong kernel source. its should be this link
2) why would you mirror it when you can get it in his sourceforge
Why is today's build 590MB while all others are 1.1GB?
pwnaz said:
hi! wich props do u use for fingerprint? i can't pass safety on my joyeuse
Click to expand...
Click to collapse
Sorry for the delay, Im on Curtana so dont know if it makes a difference, but I used no. 16 - mi 10 Global(11)
I also had to hide Magisk Manager
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is an open-source Android distribution, is available for several devices, with more being continuously added thanks to the biggest, yet ever growing, Android open-source community.
This release is UNSTABLE
Changelog
Camera fix (almost)
Import moto sensors
Download: LineageOS-18.1
I moved to different telegram channel. For more updates join here
Bugs
Camera Crashes
IMEI null
Source
device
kernel
vendor
Almost daily updates will be available till the device is STABLE
By Ghost Reborn!!!
Woow, thanks!
But when I go to download, file doesn't exists!
franllamas said:
Woow, thanks!
But when I go to download, file doesn't exists!
Click to expand...
Click to collapse
As i read on the Telegram Athene group, rom was so unstable so it has to be removed, but i think we will get this rom soon
franllamas said:
Woow, thanks!
But when I go to download, file doesn't exists!
Click to expand...
Click to collapse
Sorry man, I had to take it down
I know it's early but installed 18.1 20220402-UNOFFICIAL. Tried installing open-gapps-arm64 pico but indicated not correct for device (using twrp 3.2.3-r1-athene-arm64). Tried open-gapps-arm pico. Booted ok but sluggish and rebooted a couple of times. Any suggestions?
supermanlives said:
I know it's early but installed 18.1 20220402-UNOFFICIAL. Tried installing open-gapps-arm64 pico but indicated not correct for device (using twrp 3.2.3-r1-athene-arm64). Tried open-gapps-arm pico. Booted ok but sluggish and rebooted a couple of times. Any suggestions?
Click to expand...
Click to collapse
You need to Clean after install the ROM
Petter24 said:
You need to Clean after install the ROM
Click to expand...
Click to collapse
Thanks. I believe I've done that and things remain slow and at some point freezes and reboots. To possibly help further, here is what I've done.
in twrp recovery, wipe > format data (and advanced wipe all partitions as well)
use adb sideload for lineage-18.1-20220402-UNOFFICIAL-athene.zip, wipe Davlik Cache, wipe Cache
use similar adb sideload for open_gapps-arm-11.0-pico-20220215.zip
reboot system
Goes through Google setup (sluggish). After going through setup, response continues sluggish overall (settings, etc.). Just doing something like change to dark mode in settings resulted in a freeze then reboot.
I've also installed just the rom without any gapps, rom works well, and is responsive as expected (I'm only using wifi so need for celluar functions).
Not sure if gapps is the cause or gapps with the rom (given it's work in progress).
In any case, happy to test out lineage 18.1 on this device as I'm merely playing around.
Other info:
Running to twrp 3.5.2_9-0 (3.2.3-r1-athene-arm64-rajatgupta-1998) (I was running ArrowOS before trying L18.1).
I run LineageOS on Samsung Note 3, Nexus 7 2013, and Samsung S5 so not new to roms but not claiming being an expert either (dangerous enough to bring newer life to older devices thanks to great devs)
supermanlives said:
Goes through Google setup (sluggish). After going through setup, response continues sluggish overall (settings, etc.). Just doing something like change to dark mode in settings resulted in a freeze then reboot.
I've also installed just the rom without any gapps, rom works well, and is responsive as expected (I'm only using wifi so need for celluar functions).
Not sure if gapps is the cause or gapps with the rom (given it's work in progress).
In any case, happy to test out lineage 18.1 on this device as I'm merely playing around.
Other info:
Running to twrp 3.5.2_9-0 (3.2.3-r1-athene-arm64-rajatgupta-1998) (I was running ArrowOS before trying L18.1).
I run LineageOS on Samsung Note 3, Nexus 7 2013, and Samsung S5 so not new to roms but not claiming being an expert either (dangerous enough to bring newer life to older devices thanks to great devs)
Click to expand...
Click to collapse
Try with MindTheGapps instead of OpenGApps to check if it works well
Codefire - Listing of gapps
chuy19312 said:
Try with MindTheGapps instead of OpenGApps to check if it works well
Codefire - Listing of gapps
Click to expand...
Click to collapse
Thanks but no better. Also tried BitGapps as well. So far, no version of gapps is stable on this release for this device.
supermanlives said:
Thanks but no better. Also tried BitGapps as well. So far, no version of gapps is stable on this release for this device.
Click to expand...
Click to collapse
I will look forward to this issue
Also the system partition is less for this device, so micro, nano, pico gapps can only be installed
supermanlives said:
Thanks but no better. Also tried BitGapps as well. So far, no version of gapps is stable on this release for this device.
Click to expand...
Click to collapse
I think it's an rom/device problem because i tried android 11 roms on an HTC One M8 and GApps were working perfectly, even on an beta OpenGApps version
Edit: i think for now you can use MicroG as an alternative for GApps to check if it works, use Nanodroid Patcher then Nanodroid MicroG
Edit 2: Use LiteGApps Go version
Well, it's so sad that there are no news about this rom, especially since one of the important developers did quit because he/she got his/her Telegram account reported
I want to know. Is there someone working on this rom nowadays? i want to know since i can know if i can wait or directly stop waiting and keep on my actual rom
Edit: What happened to the Testing Hub? as far as i know, there was even an android 12 beta.
Ghost Reborn!!! please come back! We need you! This phone still has some life left in it and many thanks for your awesome work so far!
pkkilleru said:
Ghost Reborn!!! please come back! We need you! This phone still has some life left in it and many thanks for your awesome work so far!
Click to expand...
Click to collapse
Sadly, one of the developers that were working on this rom is out, got his/her Telegram account got reported by an Telegram group and got tired of things like that, the worst thing is that he/she was the one that was working really hard on porting android 11 and even trying to make android 12 work
I am not a very old member, only here from the OnePlus one days, but i have seen my fair share of abandonware. Give the man some rest, you can't keep a fish from the ocean, he's frustrated, that's all.
TheDuckWithAMonocle said:
I am not a very old member, only here from the OnePlus one days, but i have seen my fair share of abandonware. Give the man some rest, you can't keep a fish from the ocean, he's frustrated, that's all.
Click to expand...
Click to collapse
And not only that, sadly, i read on the Telegram Group that his monkey dropped his phone from the window and the phone's screen got completely broken, also, there was another developer but sadly he/she quitted because of the reports he/she got on Telegram account
chuy19312 said:
And not only that, sadly, i read on the Telegram Group that his monkey dropped his phone from the window and the phone's screen got completely broken, also, there was another developer but sadly he/she quitted because of the reports he/she got on Telegram account
Click to expand...
Click to collapse
He has monkey? I'm having trouble going through that rollercoaster of a reply.
TheDuckWithAMonocle said:
He has monkey? I'm having trouble going through that rollercoaster of a reply.
Click to expand...
Click to collapse
As i know, yes, and i read that his phone was thrown from an second floor or something like that
Ghost Reborn!!! said:
View attachment 5563557
LineageOS is an open-source Android distribution, is available for several devices, with more being continuously added thanks to the biggest, yet ever growing, Android open-source community.
This release is UNSTABLE
Changelog
Camera fix (almost)
Import moto sensors
Download: LineageOS-18.1
I moved to different telegram channel. For more updates join here
Bugs
Camera Crashes
IMEI null
Source
device
kernel
vendor
Almost daily updates will be available till the device is STABLE
By Ghost Reborn!!!
Click to expand...
Click to collapse
did you make lineage 19.1? I found a lineage 19.1 zip on sourceforge and I dont know how to install it because flashing with TWRP 3.6.1 doesn't work
Do I have to use adb and fastboot?
Does it need gapps or are they included like so many roms now?
Does it work or is it unstable and not useable?
Moto G⁴ | Cloud™ - Browse /athene at SourceForge.net
sourceforge.net
I wish if they could have optimized it.