So I flashed the eXistenZ BLACK Edition V1 from http://forum.xda-developers.com/showthread.php?t=2271613 and now my phone won't start up. It seems pretty much dead. It vibrates though but I get no activity on the display. Help?
I think You have downgraded Your phone thus leading to brick. Try rebooting in fastboot mode and installing stock firmware ftf using using flashtool.
Coradelaide said:
So I flashed the eXistenZ BLACK Edition V1 from http://forum.xda-developers.com/showthread.php?t=2271613 and now my phone won't start up. It seems pretty much dead. It vibrates though but I get no activity on the display. Help?
Click to expand...
Click to collapse
Which way you flash this rom?unlock bootloader or locked bootloader?
Hi There!
wxl104 said:
Which way you flash this rom?unlock bootloader or locked bootloader?
Click to expand...
Click to collapse
Hi. We're the same problem.
I am a newbie of this stuff but I think my phone is Already DEAD
After I installed the "CanGalaxyS4ROM.zip" ,
And I'ts says "Complete Installing", Then I "REBOOT"
But theres nothing appears in my phone until now!
And I do anything. I pop In & Out the Battery , I recovery mode
But there's nothing happen! What should I do?
Anyone can help to fix my phone
[email protected]
Jejane016 said:
Hi. We're the same problem.
I am a newbie of this stuff but I think my phone is Already DEAD
After I installed the "CanGalaxyS4ROM.zip" ,
And I'ts says "Complete Installing", Then I "REBOOT"
But theres nothing appears in my phone until now!
And I do anything. I pop In & Out the Battery , I recovery mode
But there's nothing happen! What should I do?
Anyone can help to fix my phone
[email protected]
Click to expand...
Click to collapse
Can You provide the link to the ROM You installed? Because I don't remember Xperia S having a ROM with such a name.
hi, I need some help, i'm desperate.
I was using a bad charger, when my phone was in low battery, so it turned off my phone (charging > not charging) three times. In the third boot, the CM logo just froze up, and the phone didn't boot anymore. It appears Lenovo's logo and then the screen turns black and i'm not able to press any button. I tried to: wipe everything, flash another rom, but the same still happening. I flashed stock rom too, but it gives me a bootloop. I tried to use a TWRP's backup from stock rom, but it didn't work either.
Any help? I don't know what to do
Gabriel337 said:
hi, I need some help, i'm desperate.
I was using a bad charger, when my phone was in low battery, so it turned off my phone (charging > not charging) three times. In the third boot, the CM logo just froze up, and the phone didn't boot anymore. It appears Lenovo's logo and then the screen turns black and i'm not able to press any button. I tried to: wipe everything, flash another rom, but the same still happening. I flashed stock rom too, but it gives me a bootloop. I tried to use a TWRP's backup from stock rom, but it didn't work either.
Any help? I don't know what to do
Click to expand...
Click to collapse
Since you flashed a stock rom , flash a new twrp using adb and fastboot and wipe everything except system . BTW a simple reboot (or three) cant damage system. Try checking battery too if you could
soldiersz said:
Since you flashed a stock rom , flash a new twrp using adb and fastboot and wipe everything except system . BTW a simple reboot (or three) cant damage system. Try checking battery too if you could
Click to expand...
Click to collapse
I tried that now, it didn't work, still on bootloop :/
Gabriel337 said:
I tried that now, it didn't work, still on bootloop :/
Click to expand...
Click to collapse
Use Qualcomm Flash tool or QFIL then ..
soldiersz said:
Since you flashed a stock rom , flash a new twrp using adb and fastboot and wipe everything except system . BTW a simple reboot (or three) cant damage system. Try checking battery too if you could
Click to expand...
Click to collapse
soldiersz said:
Use Qualcomm Flash tool or QFIL then ..
Click to expand...
Click to collapse
I tried that with QFIL and Lenovo Smart Assistance. and bootloop.
But I think i've made some progress:
I tried to flashed a new rom (I flashed CM/RR/AOCP before, is with these roms the frozen lenovo screen happens), CRDROID, and it appears crdroid bootanimation, and load until it frozes and phone turn off.
Gabriel337 said:
I tried that with QFIL and Lenovo Smart Assistance. and bootloop.
But I think i've made some progress:
I tried to flashed a new rom (I flashed CM/RR/AOCP), CRDROID, and it appears crdroid bootanimation, and load until it frozes and phone turn off.
Click to expand...
Click to collapse
Wipe everything except system. It should work
soldiersz said:
Since you flashed a stock rom , flash a new twrp using adb and fastboot and wipe everything except system . BTW a simple reboot (or three) cant damage system. Try checking battery too if you could
Click to expand...
Click to collapse
soldiersz said:
Use Qualcomm Flash tool or QFIL then ..
Click to expand...
Click to collapse
soldiersz said:
Wipe everything except system. It should work
Click to expand...
Click to collapse
First of all, thanks for you help!
So, I wiped, and nope, the same error happens. This is a problem that I've never seen before
Gabriel337 said:
First of all, thanks for you help!
So, I wiped, and nope, the same mistake it happens. This is a problem that I've never seen before
Click to expand...
Click to collapse
Yeah me too :crying:
Gabriel337 said:
hi, I need some help, i'm desperate.
I was using a bad charger, when my phone was in low battery, so it turned off my phone (charging > not charging) three times. In the third boot, the CM logo just froze up, and the phone didn't boot anymore. It appears Lenovo's logo and then the screen turns black and i'm not able to press any button. I tried to: wipe everything, flash another rom, but the same still happening. I flashed stock rom too, but it gives me a bootloop. I tried to use a TWRP's backup from stock rom, but it didn't work either.
Any help? I don't know what to do
Click to expand...
Click to collapse
I am facing the same problem :crying: Got any solution? How did u flash stock ROM?
I have flashed using qfil now device works fine
Hello guys,
I wanna purchase lenovo k5 plys 3gb mobile,But this one got comments from users as it got issues with battery backup,call quality & heating issues...I got very good offer on this mobile right now . Should i go for this mobile ?
kaka9876 said:
Hello guys,
I wanna purchase lenovo k5 plys 3gb mobile,But this one got comments from users as it got issues with battery backup,call quality & heating issues...I got very good offer on this mobile right now . Should i go for this mobile ?
Click to expand...
Click to collapse
You can go for Vibe k6 power. Why k5 plus?
---------- Post added at 04:03 PM ---------- Previous post was at 04:01 PM ----------
kaka9876 said:
Hello guys,
I wanna purchase lenovo k5 plys 3gb mobile,But this one got comments from users as it got issues with battery backup,call quality & heating issues...I got very good offer on this mobile right now . Should i go for this mobile ?
Click to expand...
Click to collapse
1) Main problem is Battery backup. It won't last long a day.
2) Stock ROM Really sucks
There is no heating issue though. It has been solved by latest updates
K5 Plus flash recovery
hey guys , I've been trying to flash a custom rom through TWRP recovery menu but by my mistake i wiped the system. now it just keeps booting up over and over on the lenovo logo. please help me with this
Youzpalang said:
hey guys , I've been trying to flash a custom rom through TWRP recovery menu but by my mistake i wiped the system. now it just keeps booting up over and over on the lenovo logo. please help me with this
Click to expand...
Click to collapse
Try entering to TWRP by using the hardware keys. Do this:
Pull down the battery.
Insert again.
Press power key, volume up and volume down at the same time, until lenovo logo dissappear.
If luck, you are into TWRP now.
connect phone to computer via usb cable. you should be able to access to internal memory.
So, copy into it any custom ROM previously downloaded from your computer, and flash it. That's all.
walterfuster said:
Try entering to TWRP by using the hardware keys. Do this:
Pull down the battery.
Insert again.
Press power key, volume up and volume down at the same time, until lenovo logo dissappear.
If luck, you are into TWRP now.
connect phone to computer via usb cable. you should be able to access to internal memory.
So, copy into it any custom ROM previously downloaded from your computer, and flash it. That's all.
Click to expand...
Click to collapse
Thanks man , What custom rom would you suggest? Is bootlegger OK?
Youzpalang said:
Thanks man , What custom rom would you suggest? Is bootlegger OK?
Click to expand...
Click to collapse
Bootleggers has some bugs, like WhatsApp not being able to play GIFs or videos. Also, after a while in the day, launcher becomes laggy (maybe a kernel settings issue). You have to reboot and becomes smooth and fast again.
I highly recommend LOS 15.1 or AEX 5.6 from Harry (yes, he is continuing the development!) Both of them have June updates.
I'm on AEX right now, which is such a marvelous ROM. It has a looot of customizations than any other ROM I've tried.
How to get them?
Search into the Harry8242 profile from AFH.
walterfuster said:
Bootleggers has some bugs, like WhatsApp not being able to play GIFs or videos. Also, after a while in the day, launcher becomes laggy (maybe a kernel settings issue). You have to reboot and becomes smooth and fast again.
I highly recommend LOS 15.1 or AEX 5.6 from Harry (yes, he is continuing the development!) Both of them have June updates.
I'm on AEX right now, which is such a marvelous ROM. It has a looot of customizations than any other ROM I've tried.
How to get them?
Search into the Harry8242 profile from AFH.
Click to expand...
Click to collapse
LOS 15.1 is fine but has some bugs too(camera zoomer not working).
I've finally decided to use a STOCK ROM and there is a complication, here is the problem:" I'm using lenovo downloader software to flash and once my phone is connected, the progress bar gets stuck at the begining level and says:"Flashing" below the status bar and " Sahara "- which have no idea what means- below the step bar and it also takes too much time to do the flashing which is never done! I have the same problem with QFIL( Sahara Fail )!
Youzpalang said:
LOS 15.1 is fine but has some bugs too(camera zoomer not working).
I've finally decided to use a STOCK ROM and there is a complication, here is the problem:" I'm using lenovo downloader software to flash and once my phone is connected, the progress bar gets stuck at the begining level and says:"Flashing" below the status bar and " Sahara "- which have no idea what means- below the step bar and it also takes too much time to do the flashing which is never done! I have the same problem with QFIL( Sahara Fail )!
Click to expand...
Click to collapse
I figured out , Problem solved!
Youzpalang said:
I figured out , Problem solved!
Click to expand...
Click to collapse
Glad to hear that! So, you've decided to stay on stock ROM. OK, it has sense. stock firmware is free of bugs, right? Now, do you know being on stock LL you can "update" to MM and thus get doze and adaptive storage?
How?
Follow this guide:
https://forum.xda-developers.com/k5-plus/how-to/guide-a6020l36-official-lenovo-andoid-6-t3596733
and you'll get the most updated official stock ROM available four our device. Actually, it's a backup made by an Brazilian user, where you should restore only system and boot partitions, in order to keep your data.
This update was only released for Brazil region, but, users from other regions in the thread, reported it worked for them.
I've tried it once, and worked like a charm.
I can't turn on my Redmi Note 5.
I had a problem with a kind of loop reboot after unlock the phone and installing the global rom.
the phone reboot everytime open location part in the setup.
So i started to try different rom, till the twrp said system/vendor can't find....I wipe everything... but than can't install the new os, so I try to reboot it but the phone totally died now...can't turn on.
what's happened?! the phone is new!omg....
I can't turn on it at all....therewas like 26% of battery .
Please help!:crying:
I'm sorry but what you said doesn't make any sense. What does "So i started to try different rom, till the twrp said system/vendor can't find....I wipe everything" even mean?
rfiore said:
I can't turn on my Redmi Note 5.
I had a problem with a kind of loop reboot after unlock the phone and installing the global rom.
the phone reboot everytime open location part in the setup.
So i started to try different rom, till the twrp said system/vendor can't find....I wipe everything... but than can't install the new os, so I try to reboot it but the phone totally died now...can't turn on.
what's happened?! the phone is new!omg....
I can't turn on it at all....therewas like 26% of battery .
Please help!:crying:
Click to expand...
Click to collapse
"New phone cant turn on...unbelievable"
Bruh..u unlocked it, flashed custom rom. Thats not new now.
By the title I thought it was brand new :/
.
And plz try editing the thread..no one can understand sheit
I am trying EDL mode with test point but I have problems like "the resource is in use" , than "cannot read the port COM" .
Someone found a solution about it?
Did you trigger ARP? By flashing older rom/firmware than what you had on your device?
See this thread: - https://forum.xda-developers.com/re...tutorial-unbrick-redmi-note-5-whyred-t3816260
corkiejp said:
Did you trigger ARP? By flashing older rom/firmware than what you had on your device?
See this thread: - https://forum.xda-developers.com/re...tutorial-unbrick-redmi-note-5-whyred-t3816260
Click to expand...
Click to collapse
I think so. I was trying to install different version of MIUI 10 because the global and xiaomi.eu doesn't work (going loop in setup after click con location part) so I wipe everything also system and after that the phone died...
Than I open it I did the test point , I disable driver certification and now I can see it as qualcomm device...I open MIflash and I have this error "can't open port cOM"....
I don't know what to do.
please help
corkiejp said:
Did you trigger ARP? By flashing older rom/firmware than what you had on your device?
See this thread: - https://forum.xda-developers.com/re...tutorial-unbrick-redmi-note-5-whyred-t3816260
Click to expand...
Click to collapse
Hey man,
I read the post you give me but I don't understand how to unbrick the phone now......phone is totally died can't turn on
rfiore said:
Hey man,
I read the post you give me but I don't understand how to unbrick the phone now......phone is totally died can't turn on
Click to expand...
Click to collapse
FINALLY !
I arrive to the point of loging using the global
I need my account to be authorized! please reopen the authorization again!
@rfiore
Nobody here can reopen the authorization. Check the official MIUI forums, they might reopen them again.
Or look to see if you can borrow some else's account, who already has it. Post in the unbrick thread.
I arrive to the point of loging using the global
Click to expand...
Click to collapse
Haven't a clue what you mean by loging?
Where to find someone to borrow the authorized account?
I never used this phone...I really need it... Thanks a lot
As a beginner I was looking for ways to get away from the Google dialer and the phone recording restrictions. Read that the Indonesian ROM had the miui dialer and tried to flash an official Indonesian rom on my new Redmi Note 8. The result was not good. After flashing, using the XiaoMiFlash tool and a tweak to bypass the mismatched-image-error (https://forum.xda-developers.com ... r-fastboot-t3638653, the phone remained in Fastboot mode. I have probably tried to boot a Gingko image on a Willow phone.
When trying to restart it just blinks briefly and turns of. The same in fastboot mode: just briefly buzzes and shows the the fastboot screen and then turns off. Guess it is bricked.
Is there any way to restore it to original global rom?
the same problem with you
NoviceDK said:
As a beginner I was looking for ways to get away from the Google dialer and the phone recording restrictions. Read that the Indonesian ROM had the miui dialer and tried to flash an official Indonesian rom on my new Redmi Note 8. The result was not good. After flashing, using the XiaoMiFlash tool and a tweak to bypass the mismatched-image-error (https://forum.xda-developers.com ... r-fastboot-t3638653, the phone remained in Fastboot mode. I have probably tried to boot a Gingko image on a Willow phone.
When trying to restart it just blinks briefly and turns of. The same in fastboot mode: just briefly buzzes and shows the the fastboot screen and then turns off. Guess it is bricked.
Is there any way to restore it to original global rom?
Click to expand...
Click to collapse
the service center have no idea, they said the phone must change motherboard:crying:
dugu1248 said:
the service center have no idea, they said the phone must change motherboard:crying:
Click to expand...
Click to collapse
Hi, I had a similar issue and I sent it to the service center. Was the fix too expensive for you?
SonXiaomi89 said:
Hello !
I ran into the same problem, and I solved it!
inbox me. I can help you to solve this problem.
Click to expand...
Click to collapse
why not post it here so everyone can get it ???
repair it on service center
SonXiaomi89 said:
Hello !
I ran into the same problem, and I solved it!
inbox me. I can help you to solve this problem.
Click to expand...
Click to collapse
Why not post it here, so everyone can get it ???
That's what the forum is for.
NoviceDK said:
As a beginner I was looking for ways to get away from the Google dialer and the phone recording restrictions. Read that the Indonesian ROM had the miui dialer and tried to flash an official Indonesian rom on my new Redmi Note 8. The result was not good. After flashing, using the XiaoMiFlash tool and a tweak to bypass the mismatched-image-error (https://forum.xda-developers.com ... r-fastboot-t3638653, the phone remained in Fastboot mode. I have probably tried to boot a Gingko image on a Willow phone.
When trying to restart it just blinks briefly and turns of. The same in fastboot mode: just briefly buzzes and shows the the fastboot screen and then turns off. Guess it is bricked.
Is there any way to restore it to original global rom?
Click to expand...
Click to collapse
I got the same here. Did you fix it?
hi
i have realme 8 5g (rmx3241).i flashed a corvus gsi but it comes with bootloop.so,i decided to flash stock rom.but this error comes" status brom cmd send da fail" while trying to solve that error I mistakenly format the phone , now the phone is not coming up again. I was able to solve the that error and decided to flash the firmware now it bringing up verified boot enabled. My major problem about it is the fact that the phone is not even coming up again please help
please reply
i have the same problem we need dump for this model thanks
how to?
awzx_77 said:
i have the same problem we need dump for this model thanks
Click to expand...
Click to collapse
awzx_77 said:
i have the same problem we need dump for this model thanks
Click to expand...
Click to collapse
what have to dumb
Good afternoon, after the ota software update, the display stopped working, just a black screen, but the system sounds are there. I tried to restore the official firmware via flashtool, it didn't help. Rmx3242 . The display is original, not replaceable
rentest said:
Good afternoon, after the ota software update, the display stopped working, just a black screen, but the system sounds are there. I tried to restore the official firmware via flashtool, it didn't help. Rmx3242 . The display is original, not replaceable
Click to expand...
Click to collapse
You have to flash the stock rom including the ocdt.img, I had the same problem.
Did you ever solve your problem ? I'm experiencing something similar, the phone won't boot or charge
I've got something similar. The phone turn on, barely, and immediately turns off again. Gives a tiny vibration and turns off.
Only when on the charger, if it's not on the charger, no boot whatsoever.