Related
There are many threads with users with the same problem: you can`t flash in recovery because of you locked bootloader, EDL is not working anymore, and the English PC suite is too old. So I downloaded the chinese version of PC Suite:
http://bigota.d.miui.com/MiFlash/MiInst.exe
And the full OTA ROM of global-Stable http://en.miui.com/download-334.html
Save it on your pc to access for later.
Boot your Mi Mix 2 in recovery:
Press and hold Power and Volume+, until Mi logo appears, release the buttons and a picture of a phone with cable appears.
Then connect it to the computer, en WITH THE SHIFT KEY PRESSED!, click to this:
Screenshot 1: http://imgur.com/riGFBtd
Browse to the rom file you downloaded, en click on the button (I think it is Flash, but I cannot read chinese)
Then it wil flash! It will take about 45 minutes:
Screenshot 2: http://imgur.com/GsBUy2h
Then is should boot to global stable.
Screenshot 3: http://imgur.com/sG4bENR
Update:1
Use an usb2 port, and not an usb3 if your flashing fails.
Update 2
Remember after flashing finished enter recovery mode and wipe data otherwise you will get Mi logo loop screen.
I tried this and now I have a brick. Stuck on the MI screen. Any ideas? Anyone know how to recover from this state? BL is locked. Thanks!
greanhouse1 said:
I tried this and now I have a brick. Stuck on the MI screen. Any ideas? Anyone know how to recover from this state? BL is locked. Thanks!
Click to expand...
Click to collapse
Fixed by "Reset" in Recovery mode prior to updating Rom. Don't forget everyone!
Works perfectly for me! Thanks
Thanks for the recovery tip. Phew...
This is for going from china rom to global stable right?
Hakim Farouk said:
This is for going from china rom to global stable right?
Click to expand...
Click to collapse
Yes that's correct and without unlocking bootloader, only one things not ok with this method ,after flashing global you can choose only one region China not all countries present in region list. which is ok nothing depends on this region selection, but if you want all regions its good to unlock bootloader and flash with the guide using fastboot method.
ITMASTER said:
Yes that's correct and without unlocking bootloader, only one things not ok with this method ,after flashing global you can choose only one region China not all countries present in region list. which is ok nothing depends on this region selection, but if you want all regions its good to unlock bootloader and flash with the guide using fastboot method.
Click to expand...
Click to collapse
The latest Chinese PC Suite seems to have additional extra pop ups and rearrangement. any translations? Cause I press shift and connect but can't seem to flash. there's a red wording but i didnt understand what it means
Hakim Farouk said:
The latest Chinese PC Suite seems to have additional extra pop ups and rearrangement. any translations? Cause I press shift and connect but can't seem to flash. there's a red wording but i didnt understand what it means
Click to expand...
Click to collapse
When you select correct rom, and popup appearing you should see no red but blue Chinese text (see attached screen) above and 3 other black texts below hit the upper one and process will go,
if you see red text it means the rom you selected can't be flashed on your device. usualy latest 8.5.1.0 can be flashed and latest 8.5.7.0 Chinese, other roms giving red error row. which says you need to unlock your bootloader.
I seem to be having issues on the very last step. I global rom package is verified (i see some green text) and it allows me to flash it. BUT once i press the button it immediately takes me to the screen in the link. I used the image option on the google translate app and it says something to the effect of "brush failed, please try again"'
The top button is retry, the lower one is cancel. The weird thing is, the screen on the phone changes from the recovery screen showing a phone being plugged in to one with a small loading bar and the words "Updating MIUI. dont reboot the device". That only goes away when i hit the retry button.
I could have settled for the global rom instead of flashing to the eu one once my bootloader is unlocked (30 hours to go) but if i cant get your help then eu ROM may be my only option.
EDIT:
Disregard, despite saying the flash failed i left it alone for half an hour and came back and it turned out it had flashed anyway
thezenith said:
I seem to be having issues on the very last step. I global rom package is verified (i see some green text) and it allows me to flash it. BUT once i press the button it immediately takes me to the screen in the link. I used the image option on the google translate app and it says something to the effect of "brush failed, please try again"'
Click to expand...
Click to collapse
Hi @thezenith
im having exactly the same problem, but the 0% doesn't go away.
I have a Chinese error red text adb.exe below the progression bar...
Can you help me? Thank you
I have the same issue. I'm currently stuck in a bootloop since the dev ROM crashes after I select the china region. I want to flash the global stable but get the previous errors
chris4500uk said:
I have the same issue. I'm currently stuck in a bootloop since the dev ROM crashes after I select the china region. I want to flash the global stable but get the previous errors
Click to expand...
Click to collapse
I am in the same boat. No idea what the adb error is.
I ended up taking the back cover off and doing a test point method to flash the global rom with a locked bootloader from the china ROM. Works fine now but didn't really enjoy it
chris4500uk said:
I ended up taking the back cover off and doing a test point method to flash the global rom with a locked bootloader from the china ROM. Works fine now but didn't really enjoy it
Click to expand...
Click to collapse
Trying my best to get out of having to do that. I posted on the miui forums looking for an expedited unlock, as I was able to register the phone on my account before it all went tits up.
I have exact same problem with 0%.
i want to flash from china dev rom to china stable rom. any advice?
I'm trying this method and got as far as flashing screen with 0%, red writting underneath in chinese. Not sure if it's working or not, any tips please.
Quick question
how to check which Rom I am running (global or Chinese, dev or not)
This post is a complete life saver
ITMASTER said:
There are many threads with users with the same problem: you can`t flash in recovery because of you locked bootloader, EDL is not working anymore, and the English PC suite is too old. So I downloaded the chinese version of PC Suite:
http://bigota.d.miui.com/MiFlash/MiInst.exe
And the full OTA ROM of global-Stable http://en.miui.com/download-334.html
Save it on your pc to access for later.
Boot your Mi Mix 2 in recovery:
Press and hold Power and Volume+, until Mi logo appears, release the buttons and a picture of a phone with cable appears.
Then connect it to the computer, en WITH THE SHIFT KEY PRESSED!, click to this:
Screenshot 1: http://imgur.com/riGFBtd
Browse to the rom file you downloaded, en click on the button (I think it is Flash, but I cannot read chinese)
Then it wil flash! It will take about 45 minutes:
Screenshot 2: http://imgur.com/GsBUy2h
Then is should boot to global stable.
Screenshot 3: http://imgur.com/sG4bENR
Update:1
Use an usb2 port, and not an usb3 if your flashing fails.
Update 2
Remember after flashing finished enter recovery mode and wipe data otherwise you will get Mi logo loop screen.
Click to expand...
Click to collapse
Do you happen to know if this method works for the Mi Mix 2s Chinese to Global with Locked bootloader?
Thanks!
How my phone got bricked - Yesterday when i was listening to music my phone restarted, i turned it back on and it restarted again with a black screen (or blue screen because i can see it lighting up a bit).
I tried restarting it multiple times, turning it off and also punching it but nothing helped. Later i installed miflash and went back to stock rom. But the problem still persisted , black screen .
My PC recognizes the phone as a device , but i cant get into recovery or edl mode because the phone just reboots.
I have tried holding the power + volume up and every possible combination to get into some kind of recovery.
Now when i press the volume button on my phone i can hear the sound it makes when it can't go any louder , so im guessing my phone works .
Has anyone managed to fix this?
Edit: My phone got recognized by pc as QD9008 , and i was able to flash it with qfil , but my phone still has a black screen. I also flashed it with miflash and still black. Should i try doing the deep flash cable ? Will it even do anything ? Thanks.
Really don't know.
New info in post.
Did you unlock it and flash recovery?
Can you boot into recovery or it's just a black screen from the beginning?
Have you tried any other versions of zui?
Indian/Chinese marshmallow/nougat?
sotosgolf said:
Did you unlock it and flash recovery?
Can you boot into recovery or it's just a black screen from the beginning?
Have you tried any other versions of zui?
Indian/Chinese marshmallow/nougat?
Click to expand...
Click to collapse
Before i flashed my phone with mi flash , adb was able to recognize it , but now it can't so i cant flash recovery.
Everything is black with no image at all. I have tried other versions of zui 1.9 and 2.3. But i haven't tried an Indian version.
daxtera said:
Before i flashed my phone with mi flash , adb was able to recognize it , but now it can't so i cant flash recovery.
Everything is black with no image at all. I have tried other versions of zui 1.9 and 2.3. But i haven't tried an Indian version.
Click to expand...
Click to collapse
Since the screen has light and the phone is recognized by pc my money would go on firmware issue. I would try more versions of zui. I have read that qfil is better for flashing zuk than miflash. (I'm not an expert on this, just suggesting)
Hi, i hope you don't have the similar issues as i had?
Have a read!
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/zuk-z2-plus-stuck-edl-9008-port-help-t3713629
Flashed 3 different versions of zui and nothing . Let my battery drain but that didn't help either. So now i think my only option is to flash the unlock bootloader file , because i have read that could fix my issue but i cant get adb to recognize my device even in qd9008 mode or 900e . Any way i can get adb to work? Im really getting desperate here.
Edit 2: Tried with deep flash cable , flashed countless stock roms and my phone still has a black screen. If anyone has any idea what else i can do i will try it.
@daxtera, did you solve the problem? I had the same situation and still no luck
daxtera said:
Edit 2: Tried with deep flash cable , flashed countless stock roms and my phone still has a black screen. If anyone has any idea what else i can do i will try it.
Click to expand...
Click to collapse
open the phone and remove battery plug, then connect again
I have same problem. I disconnected battery, but nothing changed. I'm in stock ROM as it came from Bangood. Android 6.0.1 and ZUI versión 2.0.093 ST.
Problem came using phone normally without any flashing process. When connected to computer it is recognized as Qualcomm HS-USB QDLoader 9008. I tried to flash 2.0.093 ST ROM using QFIL but process always ended in Download file: Fire Hose Fail FHLoader Fail: Process fail. Can anybody help me to recover my phone usability? Pls give me any suggestion.
---------- Post added at 12:55 PM ---------- Previous post was at 12:54 PM ----------
I have same problem. I disconnected battery, but nothing changed. I'm in stock ROM as it came from Bangood. Android 6.0.1 and ZUI versión 2.0.093 ST.
Problem came using phone normally without any flashing process. When connected to computer it is recognized as Qualcomm HS-USB QDLoader 9008. I tried to flash 2.0.093 ST ROM using QFIL but process always ended in Download file: Fire Hose Fail FHLoader Fail: Process fail. Can anybody help me to recover my phone usability? Pls give me any suggestion.
daxtera said:
Edit 2: Tried with deep flash cable , flashed countless stock roms and my phone still has a black screen. If anyone has any idea what else i can do i will try it.
Click to expand...
Click to collapse
packpunk said:
@daxtera, did you solve the problem? I had the same situation and still no luck
Click to expand...
Click to collapse
Hello, would like to know, if you guys tried any further & were able to resolve this issue. Please advise.
daxtera said:
Edit 2: Tried with deep flash cable , flashed countless stock roms and my phone still has a black screen. If anyone has any idea what else i can do i will try it.
Click to expand...
Click to collapse
try this it might help ....
look at every post, many people have posted many different solutions, one might work for you
zukfans.eu/community/threads/deep-flash-revive-your-zuk-z2-from-hard-brick-state-9008-mode-easily.3504/
:good:
Dhananjay_Yadav said:
try this it might help ....
look at every post, many people have posted many different solutions, one might work for you
zukfans.eu/community/threads/deep-flash-revive-your-zuk-z2-from-hard-brick-state-9008-mode-easily.3504/
:good:
Click to expand...
Click to collapse
Thanks, the xda'ian who was facing this issue i.e. 'Black screen irrespective of QFIL success' reported that he was able to revive by opening the back cover & resetting the battery
Hope this helps everyone, who were facing similar issue.
kubersharma said:
Hi, i hope you don't have the similar issues as i had?
Have a read!
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/zuk-z2-plus-stuck-edl-9008-port-help-t3713629
Click to expand...
Click to collapse
rocky459 said:
Thanks, the xda'ian who was facing this issue i.e. 'Black screen irrespective of QFIL success' reported that he was able to revive by opening the back cover & resetting the battery
Hope this helps everyone, who were facing similar issue.
Click to expand...
Click to collapse
This didn't helped bro
xyro8651 said:
This didn't helped bro
Click to expand...
Click to collapse
My zuk z2 was like that. Press the power button. Then press and release the volume up for 10-15 seconds, then press and release the volume down 10-15 seconds. You press the power button anyway. Do it for about 5-10 minutes or more. Until the device reboots. When the device boots, choose download mode or EDL mode. Do a qfill or mi flash to flash your zuk z2
adhieputra1 said:
My zuk z2 was like that. Press the power button. Then press and release the volume up for 10-15 seconds, then press and release the volume down 10-15 seconds. You press the power button anyway. Do it for about 5-10 minutes or more. Until the device reboots. When the device boots, choose download mode or EDL mode. Do a qfill or mi flash to flash your zuk z2
Click to expand...
Click to collapse
It is not working bro |
My phone is still with that condition
screen with blank dark color with backlight
hey guys my xaiomi mi a2 lite bricked while flashig rom so the device go into bootloop and locked tried every thing even EDL boot i used image v10.30 & 10.70 and 9.6 and still bootloop
i wish ay one can help me
What happens after flashing with EDL mode ?
Do you have access to fatstboot mode?
GDFI said:
What happens after flashing with EDL mode ?
Click to expand...
Click to collapse
same bootloop nothing happen
Micros24 said:
Do you have access to fatstboot mode?[/QUOTE
yes i have access to fastboot and recovery
Click to expand...
Click to collapse
Try the solution in
https://forum.xda-developers.com/mi-a2-lite/how-to/guideflash-stock-rom-stuck-edl-mode-t3880019
(modifying the EDL-flash XML to also include persist.img)
That worked for me when I was having a bootloop/endless boot even after EDL-flash (only showing the colored line when booting - for hours ...)
check this post if u didn't already tried
merlinwv said:
Try the solution in
https://forum.xda-developers.com/mi-a2-lite/how-to/guideflash-stock-rom-stuck-edl-mode-t3880019
(modifying the EDL-flash XML to also include persist.img)
That worked for me when I was having a bootloop/endless boot even after EDL-flash (only showing the colored line when booting - for hours ...)
Click to expand...
Click to collapse
Thank u so much man it's awesome :victory:
Hello, I released the bootloader of my xaiomi my a2 lite to put this rom but when it was. Rooting something went wrong and crashed, so flahee the stock rom with the my flah tool. it worked fine all day but now it doesn't recognize the sim card. can you help me? I do not know what to do
Hello everyone, This post is about how to unbrick your Redmi Note 8 Pro.
Sorry for my bad English
A couple of months ago, at the start of sales, I bought myself a Redmi Note 8 Pro, deciding to flash it on a global version, I bricked it, at that time no one knew how to fix it, I decided that it couldn’t be fixed anymore, I bought another phone and left Redmi Note 8 Pro on the shelf, and now a couple of weeks ago I decided to turn it on and see if I could fix it and it turned on! first the vibration starts and then highlighted a white Redmi logo, after that the phone showed that it is charging and I decided to go into a fastboot mode and he booted up! I flashed a boot.img and recovery from my Miui version that i was using before bricking phone (in my case it was from miui 10.4.5)and the phone turned on! none of my data was deleted.
So what you need to do:
1. After bricking your phone, do not try to charge it!
Leave somewhere for a 3-5 days to discharge your phone
2. Put your phone in charge after leaving your phone for a 3-5 days, if your phone boot up as usually (No logo and no image, only black screen) then leave it for a couple more days and put it on charge after couple days
3. If your phone discharged to 0% (battery is fully discharged), then redmi logo comes and then phone shows that it is charging like usually.
4. Do not waste your time, after battery icon shows up *photo* Press Volume Down and Power OFF together, then phone will be booted in fastboot mode.
5. Then you need to flash boot.img and recovery, I was using from version Miui 10.4.5, i will put everything below so you can download it
6. After Flashing boot and recovery, your phone will boot up and that's it!
Download links:boot.img V10.4.5
boot.img V11.0.1.0
recovery V10.4.5
Following this guide might help you to unbrick your phone, no need to use any programs like Miflash or SP FlashTool!
I hope my guide will help you, have a good day
It only works if boot image is not damaged. You can try eg: fastboot flash boot twrp.img and reboot to see.
This will replace your boot image with recovery image, it will completely brick the phone because boot image is no longer working, then prepare to go back to Mi store or $29 for authorised service account.
idog8818 said:
It only works if boot image is not damaged. You can try eg: fastboot flash boot twrp.img and reboot to see.
Click to expand...
Click to collapse
Dude, how could you suggest to try something which will hard brick your device? That's careless and reckless! So guys, don't do that!
That's just example, not suggest someone to do it. Trying to use this example to support my point.
---------- Post added at 11:49 AM ---------- Previous post was at 11:47 AM ----------
Olei said:
Dude, how could you suggest to try something which will hard brick your device? That's careless and reckless! So guys, don't do that!
Click to expand...
Click to collapse
You are using parts of sentence to kill my point.... This is ridiculous.
idog8818 said:
It only works if boot image is not damaged. You can try eg: fastboot flash boot twrp.img and reboot to see.
This will replace your boot image with recovery image, it will completely brick the phone because boot image is no longer working, then prepare to go back to Mi store or $29 for authorised service account.
Click to expand...
Click to collapse
Exactly. If you had flashed custom recovery.img and boot.img and after booting in TWRP the phone became hard brick (only led light works) then the stock boot.img is lost. The method proposed (drain the battery) could be done by opening the phone and disconnecting - connecting the battery.
There is only one solution if boot.img and recovery.img are flashed and afterwards the phone became brick. Either buy an authorized account to use it while in 'sp flash tool' or wait and see if developers create a 'MTK__DA.bin' file or an 'auth_sv.file' in order to use it in 'sp flash tool' and flash the phone. The 'mi flash' program can't work if the pc can't recognize the device. The bricked phone is visible in devices only if you hold vol button.
tornado71 said:
There is only one solution if boot.img and recovery.img are flashed and afterwards the phone became brick. Either buy an authorized account to use it while in 'sp flash tool' or wait and see if developers create a 'MTK__DA.bin' file or an 'auth_sv.file' in order to use it in 'sp flash tool' and flash the phone. The 'mi flash' program can't work if the pc can't recognize the device. The bricked phone is visible in devices only if you hold vol button.
Click to expand...
Click to collapse
https://forum.hovatek.com/thread-23776.html is collecting those above mentioned files. As of now, there's nothing available for the RN8Pro, however, it has already been requested. So there's at least the chance to fetch it from there in the future. I don't know whether the available generic Xiaomi files will work.
Olei said:
https://forum.hovatek.com/thread-23776.html is collecting those above mentioned files. As of now, there's nothing available for the RN8Pro, however, it has already been requested. So there's at least the chance to fetch it from there in the future. I don't know whether the available generic Xiaomi files will work.
Click to expand...
Click to collapse
I tried the generic files. They do not work
Olei said:
I tried the generic files. They do not work
Click to expand...
Click to collapse
They work with authorised service account, I've tried. lol.
idog8818 said:
They work with authorised service account, I've tried. lol.
Click to expand...
Click to collapse
Hello my brother, i finished by bricking my RN8PRO while flashing TWRP, no normal boot no fastboot no recovery, just LED lighting when connecting him to PC, PLZ do you know where i can find an Authorized Mi Account, i will donate. Thanks bro :good:
Thread cleaned
XDA-Developers is a platform to discuss and share, but please do not spam your mail or phone numbers to exchange paid unlock services as we do not encourage others to post with the intention to sell something, see our FORUM RULES :good:
Thank you all for your understanding :good:
strongst
Forum Moderator
Phone not booting
my phone is charging but not booting only the notifikation light glows (not blinking)
what does that mean?
documentation android xiaomi
fi4tch said:
Hello everyone, This post is about how to unbrick your Redmi Note 8 Pro.
Sorry for my bad English
A couple of months ago, at the start of sales, I bought myself a Redmi Note 8 Pro, deciding to flash it on a global version, I bricked it, at that time no one knew how to fix it, I decided that it couldn’t be fixed anymore, I bought another phone and left Redmi Note 8 Pro on the shelf, and now a couple of weeks ago I decided to turn it on and see if I could fix it and it turned on! first the vibration starts and then highlighted a white Redmi logo, after that the phone showed that it is charging and I decided to go into a fastboot mode and he booted up! I flashed a boot.img and recovery from my Miui version that i was using before bricking phone (in my case it was from miui 10.4.5)and the phone turned on! none of my data was deleted.
So what you need to do:
1. After bricking your phone, do not try to charge it!
Leave somewhere for a 3-5 days to discharge your phone
2. Put your phone in charge after leaving your phone for a 3-5 days, if your phone boot up as usually (No logo and no image, only black screen) then leave it for a couple more days and put it on charge after couple days
3. If your phone discharged to 0% (battery is fully discharged), then redmi logo comes and then phone shows that it is charging like usually.
4. Do not waste your time, after battery icon shows up *photo* Press Volume Down and Power OFF together, then phone will be booted in fastboot mode.
5. Then you need to flash boot.img and recovery, I was using from version Miui 10.4.5, i will put everything below so you can download it
6. After Flashing boot and recovery, your phone will boot up and that's it!
Download links:boot.img V10.4.5
boot.img V11.0.1.0
recovery V10.4.5
Following this guide might help you to unbrick your phone, no need to use any programs like Miflash or SP FlashTool!
I hope my guide will help you, have a good day
Click to expand...
Click to collapse
bonjour,
je debute et je cherche une doc systeme android. Peux tu m'aider?
hi,
i'm looking for a system's documentation for Android. Can you help me please?
regards
I only flashed the recovery.img, not the boot. img. Should I try to drain the battery? Also, would disconnecting/reconnecting the battery work instead of waiting for the battery to drain?
lakhdar0104 said:
Hello my brother, i finished by bricking my RN8PRO while flashing TWRP, no normal boot no fastboot no recovery, just LED lighting when connecting him to PC, PLZ do you know where i can find an Authorized Mi Account, i will donate. Thanks bro :good:
Click to expand...
Click to collapse
you must to let the battery drained to 0% or disconecte the battery after this connecte the charger and the phone boot again
How long to wait battery drain? 1 week? 2 week?
So my phone is stuck on this issue. I haven't done anything wrong. My phone was just peacefully charging then the phone switches off by itself then the bootloop happened.
This showed on the screen:
dm-verity corruption
your device is corrupt.
it can't be trusted and my not work properly.
press enter button to continue.
Or, device will power off in 5s.
(written in white)
Although it does turn off by itself if I ignore it, after I turn it on again and press enter or power button it boot until lockscreen and if I try to do something like unlocking, scrolling down notifs bar, and sliding through different page on home screen it will turn off again. It seem like it's crashing. The thing is I am not trying to root or flash something. I haven't done anything on my phone. I only have one phone and I badly need your help. I hope wiping or reformatting the phone is my last resort. My phone is updated to Android 11 and lateset MIUI (provided by the system itself and not downloaded somewhere). Thank you.
Well seems like something is corrupt.
It reboots when you touches the screen(or do anything)?
LR7875 said:
It reboots when you touches the screen(or do anything)?
Click to expand...
Click to collapse
It's more like it turns itself off again and if I try to press again power button if the problem show again, same thing happen. Sometimes MIUI logo appears and shuts down again it can't even go to lock screen.
Is there any chance you can unlock it?
It seems like your internal storage is corrupted.
LR7875 said:
Is there any chance you can unlock it?
It seems like your internal storage is corrupted.
Click to expand...
Click to collapse
At some point I did manage to unlock it but it happened only once and when I tried to open the notifs by scrolling down or tried to different part of homescreen it just shuts down. After that, it can't even go to the lockscreen after reboot. It's a never ending cycle. I can go to fastboot mode but I don't know if I can do miracle with that.
Well immediately plug into a computer and pull photos amd videos from it if you get it unlocked.
LR7875 said:
Well immediately plug into a computer and pull photos amd videos from it if you get it unlocked.
Click to expand...
Click to collapse
I reformatted it hoping that it will fix the problem. I was wrong. *sigh*
hyung_z said:
I reformatted it hoping that it will fix the problem. I was wrong. *sigh*
Click to expand...
Click to collapse
Well most likely your EMMC internal storage chip went bad R.I.P. (well maybe you sending those emojis will be more appropriate, but, oh well)
Maybe search more on google, I can't help you more
LR7875 said:
Well most likely your EMMC internal storage chip went bad R.I.P. (well maybe you sending those emojis will be more appropriate, but, oh well)
Maybe search more on google, I can't help you more
Click to expand...
Click to collapse
Do you think service center can help me with this or they'll probably just say to replace the phone if a bad chip is the case?
Maybe they will replace the motherboard with some fee. Or they will try to convince you to buy a new fancy phone just purely because xiaomi could earn more.
Thats all about luck (and problem is on xiaomi side, not your fault)
what's the smartphone model?
Redmi note 8 pro is the OP's phone.
Wait Wait just found some interesting lead.
Xiaomi needs a better way to unbrick its devices instead of Authorized Mi Accounts
Xiaomi has locked down the EDL mode on all of its devices, making it nigh impossible to unbrick a device without an Authorized Mi Account. Read on for more!
www.xda-developers.com
Patched SP flash tool!
heh, i have the same phone. reflash yours with the firmware that was on it before everything that happened. but don't flash userdata if you want your data on it
flashing it is simple process
LR7875 said:
Redmi note 8 pro is the OP's phone.
Wait Wait just found some interesting lead.
Xiaomi needs a better way to unbrick its devices instead of Authorized Mi Accounts
Xiaomi has locked down the EDL mode on all of its devices, making it nigh impossible to unbrick a device without an Authorized Mi Account. Read on for more!
www.xda-developers.com
Patched SP flash tool!
Click to expand...
Click to collapse
there is already a way to flash it with SPFT without authorization
also he must try to flash it in fastboot because it's not bricked
AsyJAIZ said:
there is already a way to flash it with SPFT without authorization
also he must try to flash it in fastboot because it's not bricked
Click to expand...
Click to collapse
He probably doesn't have his bootloader unlocked.
Fastboot OEM unlock wont work as oem unlock is probably not enabled in settings dev options.
LR7875 said:
He probably doesn't have his bootloader unlocked.
Fastboot OEM unlock wont work as oem unlock is probably not enabled in settings dev options.
Click to expand...
Click to collapse
ok i got it, then he should somehow put it in download mode...
Do you guys think I need to go to the service center because I don't know what to do. I really don't want to brick my phone. But a while ago my phone booted. I set it up just like buying a new phone but after I finished setting up, I just wait for the phone to catch up because I was afraid the phone will just shut down suddenly. And then, it happened again the phone shut downs without me doing anything. Now I tried to boot it up again but it is currently stuck at Redmi logo (plus "powered by android" at the bottom").
hyung_z said:
Do you guys think I need to go to the service center because I don't know what to do. I really don't want to brick my phone. But a while ago my phone booted. I set it up just like buying a new phone but after I finished setting up, I just wait for the phone to catch up because I was afraid the phone will just shut down suddenly. And then, it happened again the phone shut downs without me doing anything. Now I tried to boot it up again but it is currently stuck at Redmi logo (plus "powered by android" at the bottom").
Click to expand...
Click to collapse
SPFT enables when phone is a brick, so there's no need in service center.
they will flash it like we are going to do
Help, does anyone know how to fix dm-verity corruption? I was using my tab normally, then it suddenly shuts down and this error keeps popping up whenever my device boots. It goes on a loop unless I press the power button again.
deleted