Related
please help my oneplus 3 can't boot to system or recovery after unbricking with mega unbrick method 1 and 2
the phone boot to black screen and led notification shining white
i try unbricking method again and flash recovery from fastboot dosn't work
sorry my english
Did you solved? I have the same issue ... No ideea what to do... How did you solved?
bibiii79 said:
Did you solved? I have the same issue ... No ideea what to do... How did you solved?
Click to expand...
Click to collapse
If you follow the instructions for method 2, and repeatedly do it a few times, you can succeed. The important thing is to follow the instructions strictly, however silly they may look like.
I did several times, double checking all steps, still boot loop. After apply the method 2 , is doing a boot loop. Than I tried to apply again method 2 I have the successful download with green ...than I go in recovery and flash over adb sideload oos 3.2.8 ...than I start , no more boot loop, but after Oneplus logo goes into black screen with a withe stable notification led turned on ....I left over night ... But it keep staying like that until I force to power off by pressing and holding power button( after I want to turn off i cannot only going into bootloader and from there I choose power of, because is automatically turning on if I press and hold only the power button in order to turn off the device).
Pfiu difficult... I am thinking, some files are missing, this , and where I go in bootloader in missing the values on. Bootloader version- , and baseband version- ....
bibiii79 said:
I did several times, double checking all steps, still boot loop. After apply the method 2 , is doing a boot loop. Than I tried to apply again method 2 I have the successful download with green ...than I go in recovery and flash over adb sideload oos 3.2.8 ...than I start , no more boot loop, but after Oneplus logo goes into black screen with a withe stable notification led turned on ....I left over night ... But it keep staying like that until I force to power off by pressing and holding power button( after I want to turn off i cannot only going into bootloader and from there I choose power of, because is automatically turning on if I press and hold only the power button in order to turn off the device).
Pfiu difficult... I am thinking, some files are missing, this , and where I go in bootloader in missing the values on. Bootloader version- , and baseband version- ....
Click to expand...
Click to collapse
The bootloader and baseband versions were missing when i bought the phone new and are still blank today after flashing a few ROMs and Recoveries/Firmware and modems. So that is not an issue.
Are you downloading the correct files?
tnsmani said:
The bootloader and baseband versions were missing when i bought the phone new and are still blank today after flashing a few ROMs and Recoveries/Firmware and modems. So that is not an issue.
Are you downloading the correct files?
Click to expand...
Click to collapse
Yes, I am using the unbrick method with msm download tool, using the Method 2, after apply, installing all's the Qualcomm drivers 9008 , drivers signature off in windows.... The unbrick tool is passed with the green message .... Reversing back to oos 3.1.2 Android 6.0.1 ..stock, I have recovery working and bootloader also working, bootloader is locked ....so I cannot do too mutch. I start the device right away after unbrick tool and still boot to op logo that is going to vibrate as restart .... And stays in boot loop. Next step I go into recovery , and do over sideload an update with a full ROM, oos 4.0.1 , also tried with full ROM 3.2.8 ...I can sideload the whole ROM , than i start the device and after op logo goes in black screen and white motivation led lighted .... I leave it for 30 min, and still in the same, now I force turn off by going into bootloader and power off. Notice that after this sideload flash I cannot access the recovery. So I need to apply back the unbrick msm download tool for op3.
I tried also to flash over sideload a signed script from Ahmed , unified toolkit , to activate the USB debugging, but gives an error.
I run out of ideas .....any help is welcome ....
Thanks
bibiii79 said:
Yes, I am using the unbrick method with msm download tool, using the Method 2, after apply, installing all's the Qualcomm drivers 9008 , drivers signature off in windows.... The unbrick tool is passed with the green message .... Reversing back to oos 3.1.2 Android 6.0.1 ..stock, I have recovery working and bootloader also working, bootloader is locked ....so I cannot do too mutch. I start the device right away after unbrick tool and still boot to op logo that is going to vibrate as restart .... And stays in boot loop. Next step I go into recovery , and do over sideload an update with a full ROM, oos 4.0.1 , also tried with full ROM 3.2.8 ...I can sideload the whole ROM , than i start the device and after op logo goes in black screen and white motivation led lighted .... I leave it for 30 min, and still in the same, now I force turn off by going into bootloader and power off. Notice that after this sideload flash I cannot access the recovery. So I need to apply back the unbrick msm download tool for op3.
I tried also to flash over sideload a signed script from Ahmed , unified toolkit , to activate the USB debugging, but gives an error.
I run out of ideas .....any help is welcome ....
Thanks
Click to expand...
Click to collapse
Hi bro, did you solved it? Im facing the same problem here
bluuquthug said:
Hi bro, did you solved it? Im facing the same problem here
Click to expand...
Click to collapse
Unfortunately not yet ... Yes I solve it, I bought a Moto Z with dual SIM and snapdragon 820 and 64 GB and SD card with 280 euro .... I am disappointed at the moment about Oneplus 3 , I was a Nexus fan and switched to oneplus ... I thought will be opensource ... But way to expensive repair this done in service , Easter to buy another one ... You save time .. you cannot save money on it ..
bibiii79 said:
Unfortunately not yet ... Yes I solve it, I bought a Moto Z with dual SIM and snapdragon 820 and 64 GB and SD card with 280 euro .... I am disappointed at the moment about Oneplus 3 , I was a Nexus fan and switched to oneplus ... I thought will be opensource ... But way to expensive repair this done in service , Easter to buy another one ... You save time .. you cannot save money on it ..
Click to expand...
Click to collapse
Had the same problem with my oneplus x.
P
oneszero said:
Had the same problem with my oneplus x.
Click to expand...
Click to collapse
And what was the end of your story with Oneplus x?
bibiii79 said:
P
And what was the end of your story with Oneplus x?
Click to expand...
Click to collapse
RMA'd it to a service center for repair, after two tech support calls. They actually told me that they couldn't repair it due to "water damage." Funny thing is, that phone was never dropped in or on anything, let alone in WATER. Then to add insult to injury they refused to send it back to me stating that I had to pay for return shipping. My wife got on the phone with them and by the end of the phone call they said that they would send it back for free. HAHA. So I bought a Oneplus 3 after that whole ordeal. All the while the Oneplus X sat in the box on my desk for about 5 months. Last week I decided to pick it up and tinker with it some more. I scoured the net trying to find any other programs or solutions that I hadn't tried prior to sending it off. I came across somethings that I hadn't seen before. https://forum.xda-developers.com/oneplus-x/help/fastboot-mode-available-stuck-kindly-t3387918. http://rootmygalaxy.net/oneplus-x-s...w.pickmod.com/rom/4187/coloros-for-oneplus-x/. Ended up flashing Color OS via msm tool. Wouldn't load OS, but i didn't end up with a black screen and white LED, it just sat there. So right after I flashed Color OS, i Flashed the mini unbrick tool by Naman, and BOOM it booted into OS. Hope this helps.
hi, I need some help, i'm desperate.
I was using a bad charger, when my phone was in low battery, so it turned off my phone (charging > not charging) three times. In the third boot, the CM logo just froze up, and the phone didn't boot anymore. It appears Lenovo's logo and then the screen turns black and i'm not able to press any button. I tried to: wipe everything, flash another rom, but the same still happening. I flashed stock rom too, but it gives me a bootloop. I tried to use a TWRP's backup from stock rom, but it didn't work either.
Any help? I don't know what to do
Gabriel337 said:
hi, I need some help, i'm desperate.
I was using a bad charger, when my phone was in low battery, so it turned off my phone (charging > not charging) three times. In the third boot, the CM logo just froze up, and the phone didn't boot anymore. It appears Lenovo's logo and then the screen turns black and i'm not able to press any button. I tried to: wipe everything, flash another rom, but the same still happening. I flashed stock rom too, but it gives me a bootloop. I tried to use a TWRP's backup from stock rom, but it didn't work either.
Any help? I don't know what to do
Click to expand...
Click to collapse
Since you flashed a stock rom , flash a new twrp using adb and fastboot and wipe everything except system . BTW a simple reboot (or three) cant damage system. Try checking battery too if you could
soldiersz said:
Since you flashed a stock rom , flash a new twrp using adb and fastboot and wipe everything except system . BTW a simple reboot (or three) cant damage system. Try checking battery too if you could
Click to expand...
Click to collapse
I tried that now, it didn't work, still on bootloop :/
Gabriel337 said:
I tried that now, it didn't work, still on bootloop :/
Click to expand...
Click to collapse
Use Qualcomm Flash tool or QFIL then ..
soldiersz said:
Since you flashed a stock rom , flash a new twrp using adb and fastboot and wipe everything except system . BTW a simple reboot (or three) cant damage system. Try checking battery too if you could
Click to expand...
Click to collapse
soldiersz said:
Use Qualcomm Flash tool or QFIL then ..
Click to expand...
Click to collapse
I tried that with QFIL and Lenovo Smart Assistance. and bootloop.
But I think i've made some progress:
I tried to flashed a new rom (I flashed CM/RR/AOCP before, is with these roms the frozen lenovo screen happens), CRDROID, and it appears crdroid bootanimation, and load until it frozes and phone turn off.
Gabriel337 said:
I tried that with QFIL and Lenovo Smart Assistance. and bootloop.
But I think i've made some progress:
I tried to flashed a new rom (I flashed CM/RR/AOCP), CRDROID, and it appears crdroid bootanimation, and load until it frozes and phone turn off.
Click to expand...
Click to collapse
Wipe everything except system. It should work
soldiersz said:
Since you flashed a stock rom , flash a new twrp using adb and fastboot and wipe everything except system . BTW a simple reboot (or three) cant damage system. Try checking battery too if you could
Click to expand...
Click to collapse
soldiersz said:
Use Qualcomm Flash tool or QFIL then ..
Click to expand...
Click to collapse
soldiersz said:
Wipe everything except system. It should work
Click to expand...
Click to collapse
First of all, thanks for you help!
So, I wiped, and nope, the same error happens. This is a problem that I've never seen before
Gabriel337 said:
First of all, thanks for you help!
So, I wiped, and nope, the same mistake it happens. This is a problem that I've never seen before
Click to expand...
Click to collapse
Yeah me too :crying:
Gabriel337 said:
hi, I need some help, i'm desperate.
I was using a bad charger, when my phone was in low battery, so it turned off my phone (charging > not charging) three times. In the third boot, the CM logo just froze up, and the phone didn't boot anymore. It appears Lenovo's logo and then the screen turns black and i'm not able to press any button. I tried to: wipe everything, flash another rom, but the same still happening. I flashed stock rom too, but it gives me a bootloop. I tried to use a TWRP's backup from stock rom, but it didn't work either.
Any help? I don't know what to do
Click to expand...
Click to collapse
I am facing the same problem :crying: Got any solution? How did u flash stock ROM?
I have flashed using qfil now device works fine
Hello guys,
I wanna purchase lenovo k5 plys 3gb mobile,But this one got comments from users as it got issues with battery backup,call quality & heating issues...I got very good offer on this mobile right now . Should i go for this mobile ?
kaka9876 said:
Hello guys,
I wanna purchase lenovo k5 plys 3gb mobile,But this one got comments from users as it got issues with battery backup,call quality & heating issues...I got very good offer on this mobile right now . Should i go for this mobile ?
Click to expand...
Click to collapse
You can go for Vibe k6 power. Why k5 plus?
---------- Post added at 04:03 PM ---------- Previous post was at 04:01 PM ----------
kaka9876 said:
Hello guys,
I wanna purchase lenovo k5 plys 3gb mobile,But this one got comments from users as it got issues with battery backup,call quality & heating issues...I got very good offer on this mobile right now . Should i go for this mobile ?
Click to expand...
Click to collapse
1) Main problem is Battery backup. It won't last long a day.
2) Stock ROM Really sucks
There is no heating issue though. It has been solved by latest updates
K5 Plus flash recovery
hey guys , I've been trying to flash a custom rom through TWRP recovery menu but by my mistake i wiped the system. now it just keeps booting up over and over on the lenovo logo. please help me with this
Youzpalang said:
hey guys , I've been trying to flash a custom rom through TWRP recovery menu but by my mistake i wiped the system. now it just keeps booting up over and over on the lenovo logo. please help me with this
Click to expand...
Click to collapse
Try entering to TWRP by using the hardware keys. Do this:
Pull down the battery.
Insert again.
Press power key, volume up and volume down at the same time, until lenovo logo dissappear.
If luck, you are into TWRP now.
connect phone to computer via usb cable. you should be able to access to internal memory.
So, copy into it any custom ROM previously downloaded from your computer, and flash it. That's all.
walterfuster said:
Try entering to TWRP by using the hardware keys. Do this:
Pull down the battery.
Insert again.
Press power key, volume up and volume down at the same time, until lenovo logo dissappear.
If luck, you are into TWRP now.
connect phone to computer via usb cable. you should be able to access to internal memory.
So, copy into it any custom ROM previously downloaded from your computer, and flash it. That's all.
Click to expand...
Click to collapse
Thanks man , What custom rom would you suggest? Is bootlegger OK?
Youzpalang said:
Thanks man , What custom rom would you suggest? Is bootlegger OK?
Click to expand...
Click to collapse
Bootleggers has some bugs, like WhatsApp not being able to play GIFs or videos. Also, after a while in the day, launcher becomes laggy (maybe a kernel settings issue). You have to reboot and becomes smooth and fast again.
I highly recommend LOS 15.1 or AEX 5.6 from Harry (yes, he is continuing the development!) Both of them have June updates.
I'm on AEX right now, which is such a marvelous ROM. It has a looot of customizations than any other ROM I've tried.
How to get them?
Search into the Harry8242 profile from AFH.
walterfuster said:
Bootleggers has some bugs, like WhatsApp not being able to play GIFs or videos. Also, after a while in the day, launcher becomes laggy (maybe a kernel settings issue). You have to reboot and becomes smooth and fast again.
I highly recommend LOS 15.1 or AEX 5.6 from Harry (yes, he is continuing the development!) Both of them have June updates.
I'm on AEX right now, which is such a marvelous ROM. It has a looot of customizations than any other ROM I've tried.
How to get them?
Search into the Harry8242 profile from AFH.
Click to expand...
Click to collapse
LOS 15.1 is fine but has some bugs too(camera zoomer not working).
I've finally decided to use a STOCK ROM and there is a complication, here is the problem:" I'm using lenovo downloader software to flash and once my phone is connected, the progress bar gets stuck at the begining level and says:"Flashing" below the status bar and " Sahara "- which have no idea what means- below the step bar and it also takes too much time to do the flashing which is never done! I have the same problem with QFIL( Sahara Fail )!
Youzpalang said:
LOS 15.1 is fine but has some bugs too(camera zoomer not working).
I've finally decided to use a STOCK ROM and there is a complication, here is the problem:" I'm using lenovo downloader software to flash and once my phone is connected, the progress bar gets stuck at the begining level and says:"Flashing" below the status bar and " Sahara "- which have no idea what means- below the step bar and it also takes too much time to do the flashing which is never done! I have the same problem with QFIL( Sahara Fail )!
Click to expand...
Click to collapse
I figured out , Problem solved!
Youzpalang said:
I figured out , Problem solved!
Click to expand...
Click to collapse
Glad to hear that! So, you've decided to stay on stock ROM. OK, it has sense. stock firmware is free of bugs, right? Now, do you know being on stock LL you can "update" to MM and thus get doze and adaptive storage?
How?
Follow this guide:
https://forum.xda-developers.com/k5-plus/how-to/guide-a6020l36-official-lenovo-andoid-6-t3596733
and you'll get the most updated official stock ROM available four our device. Actually, it's a backup made by an Brazilian user, where you should restore only system and boot partitions, in order to keep your data.
This update was only released for Brazil region, but, users from other regions in the thread, reported it worked for them.
I've tried it once, and worked like a charm.
So I was using my phone normally yesterday, until it shuts down randomly while using the camera. So I restarted it, but it still restarted as I got to my home screen. So I said to myself that there must be something went wrong in the rom that I am using (which is LOS 14.1), but I've got a backup before **** happened, not to worry, after I restored it though, IT STILL RESTARTED, but the weird part is, It doesn't restart if it is charging. So I wondered maybe the battery has given up, but in the TWRP, it doesn't restart even unplugged?
Things that I had tried:
1. Tried a new rom (this time using BORETS ROM), still restarts when unplugged.
2. Ran the backup again, still no change.
3.Drained my battery in TWRP, charged it up to 100%, still restarts.
Also, when I boot up my phone without a USB cable plugged in, It restarts when loading the main rom (the rom's splash screen, not the main splash screen), PLEASE HELP ME.
Xnin47 said:
So I was using my phone normally yesterday, until it shuts down randomly while using the camera. So I restarted it, but it still restarted as I got to my home screen. So I said to myself that there must be something went wrong in the rom that I am using (which is LOS 14.1), but I've got a backup before **** happened, not to worry, after I restored it though, IT STILL RESTARTED, but the weird part is, It doesn't restart if it is charging. So I wondered maybe the battery has given up, but in the TWRP, it doesn't restart even unplugged?
Things that I had tried:
1. Tried a new rom (this time using BORETS ROM), still restarts when unplugged.
2. Ran the backup again, still no change.
3.Drained my battery in TWRP, charged it up to 100%, still restarts.
Also, when I boot up my phone without a USB cable plugged in, It restarts when loading the main rom (the rom's splash screen, not the main splash screen), PLEASE HELP ME.
Click to expand...
Click to collapse
Hello ..a few questions.
What phone is it ?
What number TWRP do you have ? 3.0.X.X
X= ?
timbernot said:
Hello ..a few questions.
What phone is it ?
What number TWRP do you have ? 3.0.X.X
X= ?
Click to expand...
Click to collapse
It's a ZE551ML and I currently have returned to stock boot loader and recovery image, but the time that it happened I was on TWRP 3.0.3-M4. Why'd you ask?
Xnin47 said:
It's a ZE551ML and I currently have returned to stock boot loader and recovery image, but the time that it happened I was on TWRP 3.0.3-M4. Why'd you ask?
Click to expand...
Click to collapse
Thought you might have older TWRP - no worries
Alls OK now then ?
If it is ? Put **[ solved ]** in title :good:
timbernot said:
Thought you might have older TWRP - no worries
Alls OK now then ?
If it is ? Put **[ solved ]** in title :good:
Click to expand...
Click to collapse
Unfortunately, No it's still not okay.
Xnin47 said:
Unfortunately, No it's still not okay.
Click to expand...
Click to collapse
Have you got IFWI version 0094.0183 in bootloader and M stock recovery ?
If you have , you can use my downgrade from M to LP via SD card from my signature below
If, when back in LP .196 -- You still have the same problem , you will be looking at an hardware and not software problem :good:
https://forum.xda-developers.com/zenfone2/help/success-downgrade-mm-to-lp-via-sd-card-t3520642
timbernot said:
Have you got IFWI version 0094.0183 in bootloader and M stock recovery ?
If you have , you can use my downgrade from M to LP via SD card from my signature below
If, when back in LP .196 -- You still have the same problem , you will be looking at an hardware and not software problem :good:
https://forum.xda-developers.com/zenfone2/help/success-downgrade-mm-to-lp-via-sd-card-t3520642
Click to expand...
Click to collapse
Today I flashed 2.15.40.13 on raw using Asus Flash Tool, still no luck , I guess it's a hardware problem huh?
Xnin47 said:
Today I flashed 2.15.40.13 on raw using Asus Flash Tool, still no luck , I guess it's a hardware problem huh?
Click to expand...
Click to collapse
Seems like you didn't need any help.
timbernot said:
Seems like you didn't need any help.
Click to expand...
Click to collapse
The problem just seems very weird to be a hardware problem , So, again, after charging my phone up to 100 percent, booted it up to Android and then unplugged it, and I had about a minute of activity now before it shuts down. Again in recovery or boot loader, it never shuts down.
Do me a favour , test with cable attached to phone but detached from charger to rule out USB socket , cable etc:good:
timbernot said:
Do me a favour , test with cable attached to phone but detached from charger to rule out USB socket , cable etc:good:
Click to expand...
Click to collapse
Tried it now, still shuts down.
Xnin47 said:
Tried it now, still shuts down.
Click to expand...
Click to collapse
If its out of warranty , i would first check all connections inside phone ,
it could be battery
it could be main board or usb board.
If it were battery though , it should shut down connected to lower amp pc usb2.
Not much you can do really apart from above, usb boards are cheap`sh to buy, maybe worth the gamble ? Obviously if connections dont fix before ditching if main board. Try a discon of all connections and reconnect before ditching
I have the EXACTLY same problem.
Did you solved?
Guys, I know it's been a long time this question was asked, but I'm having the exact same problem since a week.
@owenreilly @Xnin47 any luck on solving it?
Thanks a lot!
neves4 said:
Guys, I know it's been a long time this question was asked, but I'm having the exact same problem since a week.
@owenreilly @Xnin47 any luck on solving it?
Thanks a lot!
Click to expand...
Click to collapse
Wow this is an old problem. Nope, I didn't fix it, instead I was back on my Galaxy Alpha until I moved on to newer phones. I believe the problem though was the battery, so if you want, you can replace that. Sorry for the late reply bro!
Xnin47 said:
Wow this is an old problem. Nope, I didn't fix it, instead I was back on my Galaxy Alpha until I moved on to newer phones. I believe the problem though was the battery, so if you want, you can replace that. Sorry for the late reply bro!
Click to expand...
Click to collapse
Hey dude! I've replaced my battery 3 weeks ago based on a Brazilian forum and it was, indeed, the culprit haha. Now everything is back on track again.
Thanks a lot for the answer
How my phone got bricked - Yesterday when i was listening to music my phone restarted, i turned it back on and it restarted again with a black screen (or blue screen because i can see it lighting up a bit).
I tried restarting it multiple times, turning it off and also punching it but nothing helped. Later i installed miflash and went back to stock rom. But the problem still persisted , black screen .
My PC recognizes the phone as a device , but i cant get into recovery or edl mode because the phone just reboots.
I have tried holding the power + volume up and every possible combination to get into some kind of recovery.
Now when i press the volume button on my phone i can hear the sound it makes when it can't go any louder , so im guessing my phone works .
Has anyone managed to fix this?
Edit: My phone got recognized by pc as QD9008 , and i was able to flash it with qfil , but my phone still has a black screen. I also flashed it with miflash and still black. Should i try doing the deep flash cable ? Will it even do anything ? Thanks.
Really don't know.
New info in post.
Did you unlock it and flash recovery?
Can you boot into recovery or it's just a black screen from the beginning?
Have you tried any other versions of zui?
Indian/Chinese marshmallow/nougat?
sotosgolf said:
Did you unlock it and flash recovery?
Can you boot into recovery or it's just a black screen from the beginning?
Have you tried any other versions of zui?
Indian/Chinese marshmallow/nougat?
Click to expand...
Click to collapse
Before i flashed my phone with mi flash , adb was able to recognize it , but now it can't so i cant flash recovery.
Everything is black with no image at all. I have tried other versions of zui 1.9 and 2.3. But i haven't tried an Indian version.
daxtera said:
Before i flashed my phone with mi flash , adb was able to recognize it , but now it can't so i cant flash recovery.
Everything is black with no image at all. I have tried other versions of zui 1.9 and 2.3. But i haven't tried an Indian version.
Click to expand...
Click to collapse
Since the screen has light and the phone is recognized by pc my money would go on firmware issue. I would try more versions of zui. I have read that qfil is better for flashing zuk than miflash. (I'm not an expert on this, just suggesting)
Hi, i hope you don't have the similar issues as i had?
Have a read!
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/zuk-z2-plus-stuck-edl-9008-port-help-t3713629
Flashed 3 different versions of zui and nothing . Let my battery drain but that didn't help either. So now i think my only option is to flash the unlock bootloader file , because i have read that could fix my issue but i cant get adb to recognize my device even in qd9008 mode or 900e . Any way i can get adb to work? Im really getting desperate here.
Edit 2: Tried with deep flash cable , flashed countless stock roms and my phone still has a black screen. If anyone has any idea what else i can do i will try it.
@daxtera, did you solve the problem? I had the same situation and still no luck
daxtera said:
Edit 2: Tried with deep flash cable , flashed countless stock roms and my phone still has a black screen. If anyone has any idea what else i can do i will try it.
Click to expand...
Click to collapse
open the phone and remove battery plug, then connect again
I have same problem. I disconnected battery, but nothing changed. I'm in stock ROM as it came from Bangood. Android 6.0.1 and ZUI versión 2.0.093 ST.
Problem came using phone normally without any flashing process. When connected to computer it is recognized as Qualcomm HS-USB QDLoader 9008. I tried to flash 2.0.093 ST ROM using QFIL but process always ended in Download file: Fire Hose Fail FHLoader Fail: Process fail. Can anybody help me to recover my phone usability? Pls give me any suggestion.
---------- Post added at 12:55 PM ---------- Previous post was at 12:54 PM ----------
I have same problem. I disconnected battery, but nothing changed. I'm in stock ROM as it came from Bangood. Android 6.0.1 and ZUI versión 2.0.093 ST.
Problem came using phone normally without any flashing process. When connected to computer it is recognized as Qualcomm HS-USB QDLoader 9008. I tried to flash 2.0.093 ST ROM using QFIL but process always ended in Download file: Fire Hose Fail FHLoader Fail: Process fail. Can anybody help me to recover my phone usability? Pls give me any suggestion.
daxtera said:
Edit 2: Tried with deep flash cable , flashed countless stock roms and my phone still has a black screen. If anyone has any idea what else i can do i will try it.
Click to expand...
Click to collapse
packpunk said:
@daxtera, did you solve the problem? I had the same situation and still no luck
Click to expand...
Click to collapse
Hello, would like to know, if you guys tried any further & were able to resolve this issue. Please advise.
daxtera said:
Edit 2: Tried with deep flash cable , flashed countless stock roms and my phone still has a black screen. If anyone has any idea what else i can do i will try it.
Click to expand...
Click to collapse
try this it might help ....
look at every post, many people have posted many different solutions, one might work for you
zukfans.eu/community/threads/deep-flash-revive-your-zuk-z2-from-hard-brick-state-9008-mode-easily.3504/
:good:
Dhananjay_Yadav said:
try this it might help ....
look at every post, many people have posted many different solutions, one might work for you
zukfans.eu/community/threads/deep-flash-revive-your-zuk-z2-from-hard-brick-state-9008-mode-easily.3504/
:good:
Click to expand...
Click to collapse
Thanks, the xda'ian who was facing this issue i.e. 'Black screen irrespective of QFIL success' reported that he was able to revive by opening the back cover & resetting the battery
Hope this helps everyone, who were facing similar issue.
kubersharma said:
Hi, i hope you don't have the similar issues as i had?
Have a read!
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/zuk-z2-plus-stuck-edl-9008-port-help-t3713629
Click to expand...
Click to collapse
rocky459 said:
Thanks, the xda'ian who was facing this issue i.e. 'Black screen irrespective of QFIL success' reported that he was able to revive by opening the back cover & resetting the battery
Hope this helps everyone, who were facing similar issue.
Click to expand...
Click to collapse
This didn't helped bro
xyro8651 said:
This didn't helped bro
Click to expand...
Click to collapse
My zuk z2 was like that. Press the power button. Then press and release the volume up for 10-15 seconds, then press and release the volume down 10-15 seconds. You press the power button anyway. Do it for about 5-10 minutes or more. Until the device reboots. When the device boots, choose download mode or EDL mode. Do a qfill or mi flash to flash your zuk z2
adhieputra1 said:
My zuk z2 was like that. Press the power button. Then press and release the volume up for 10-15 seconds, then press and release the volume down 10-15 seconds. You press the power button anyway. Do it for about 5-10 minutes or more. Until the device reboots. When the device boots, choose download mode or EDL mode. Do a qfill or mi flash to flash your zuk z2
Click to expand...
Click to collapse
It is not working bro |
My phone is still with that condition
screen with blank dark color with backlight
Hi guys,
I attached my brand new Galaxy S20 Ultra to my PC and started Smart Switch today. The Software showed an update for my device so I downloaded it and started the update process. Unfortunately, Smart Switch got stuck during the update process at 68%. Nothing happened, cables and all still attached. It just didn't proceed any further for hours.
I decided to take the path of stopping the process, using the key combination shown on my device. It now said, recover your device software with Smart Switch Emergency recovery function. I started this and guess what: it also stopped at 68%.
I "rebooted" the device (volume down + power for approx. 10 seconds) and it starts again in recovery mode.
I manually filled in the recovery code and it seemed like Smart Switch was downloading the OS again. Started the recovery process and it is stuck at 68% again.
Now I am just super afraid that I bricked the device by using Samsungs original software.
Anyone her to help or have similar experiences?
Thanks for any advice on how to proceed.
Julius
What exactly were you trying to do? I mean normally you hook up old phone and use smart switch to update new phone. So why was you connected to a PC? It does sound like you bricked it.
So now you probably need to flash the ROM.
I read that smart switch is a good and valid source to check for updates. I never thought that an official Samsung software can be so bad at something so basic, resulting in bricking my phone...
Stop using smart switch to update your phone. You haven't hard bricked it because you still have recovery. It's called a soft brick. Download Odin 13.3_3B from here on xda. Do not use the 13.4 because it's suspected to have a fishy call back to a server from a dll that's in the program folder. Download the atch firmware for your model from sammobile or get it in this s20 ultra forum. You should be able to flash the new firmware.
Thanks @freebee269. Does flashing the firmware with Odin void my warranty or does this only count for rooting devices? (Sorry for stupid questions)
Julius_GER said:
Thanks @freebee269. Does flashing the firmware with Odin void my warranty or does this only count for rooting devices? (Sorry for stupid questions)
Click to expand...
Click to collapse
Odin uses official firmware from Samsung so no warranty voided.
Julius_GER said:
Hi guys,
I attached my brand new Galaxy S20 Ultra to my PC and started Smart Switch today. The Software showed an update for my device so I downloaded it and started the update process. Unfortunately, Smart Switch got stuck during the update process at 68%. Nothing happened, cables and all still attached. It just didn't proceed any further for hours.
I decided to take the path of stopping the process, using the key combination shown on my device. It now said, recover your device software with Smart Switch Emergency recovery function. I started this and guess what: it also stopped at 68%.
I "rebooted" the device (volume down + power for approx. 10 seconds) and it starts again in recovery mode.
I manually filled in the recovery code and it seemed like Smart Switch was downloading the OS again. Started the recovery process and it is stuck at 68% again.
Now I am just super afraid that I bricked the device by using Samsungs original software.
Anyone her to help or have similar experiences?
Thanks for any advice on how to proceed.
Julius
Click to expand...
Click to collapse
What kind of USB Port did you use?
Try again using a USB 2.0 port, Samsung always had problems with it's software and USB 3.0 ports.
Use USB 2.0 and try again.
Hi guys, i have a similar problem as (xReem).
Attached my GT SM-T515/10.1 tab to smart switch where the software was unable to recognise my device!? Was advised to use the Emergency Code function but i have no code due to backing up my data to sd card! I have Magisk and TWRP installed where my device was working beforehand, but since attaching to smart switch, my device is now totally "dysfunctional"!!!
Error message as follows...
...An error as occurred while updating the software. Use the Emergency Recovery function in the Smart Switch PC software. ...
Like i sad, i have no code!!!
I am able to get to the device unlock choice screen and if i choose to restart, my device always boots to the Smart Switch Emergency Code screen?! If i choose the device unlock or download screens, both screens are accessible! Tried to flash my original firmware (BTU-T515XXU3ASK5-20191224095700) using Odin3_v3.14.1 and twrp-3.3.1-6-T515XXU3ASK5-20200215 with no joy (Fail!)
Although i'm totally @"#$%* off about this, as its a new device, i am also curious if someone has ever cracked this... 'Smart Switch No Code' problem before. Hmm...
Anyways, any help appriciated...
Oh! Cannot access recovery at all...
Any help appriciated.
klantee said:
Hi guys, i have a similar problem as (xReem).
Attached my GT SM-T515/10.1 tab to smart switch where the software was unable to recognise my device!? Was advised to use the Emergency Code function but i have no code due to backing up my data to sd card! I have Magisk and TWRP installed where my device was working beforehand, but since attaching to smart switch, my device is now totally "dysfunctional"!!!
Error message as follows...
...An error as occurred while updating the software. Use the Emergency Recovery function in the Smart Switch PC software. ...
Like i sad, i have no code!!!
I am able to get to the device unlock choice screen and if i choose to restart, my device always boots to the Smart Switch Emergency Code screen?! If i choose the device unlock or download screens, both screens are accessible! Tried to flash my original firmware (BTU-T515XXU3ASK5-20191224095700) using Odin3_v3.14.1 and twrp-3.3.1-6-T515XXU3ASK5-20200215 with no joy (Fail!)
Although i'm totally @"#$%* off about this, as its a new device, i am also curious if someone has ever cracked this... 'Smart Switch No Code' problem before. Hmm...
Anyways, any help appriciated...
Oh! Cannot access recovery at all...
Any help appriciated.
Click to expand...
Click to collapse
Did you ever get things working ? If not, when you flashed with Odin - did you use the PATCHED Version ? THis is necessary when flashing firmware via Odin on the S20 Ultra.....
You can download Odin 3.14.1_3b here: https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Be sure to download the PATCHED version of 3.14.1_3b (it is located as an attached file at the bottom of the first post in the OP at the link above. Hope this helps.
Geekser said:
Did you ever get things working ? If not, when you flashed with Odin - did you use the PATCHED Version ? THis is necessary when flashing firmware via Odin on the S20 Ultra.....
You can download Odin 3.14.1_3b here: https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Be sure to download the PATCHED version of 3.14.1_3b (it is located as an attached file at the bottom of the first post in the OP at the link above. Hope this helps.
Click to expand...
Click to collapse
No, to answer your first question, and yes used the patched version of Odin you state but with no joy.
(would another version of Odin be better for my device model?)
I just need to find a way to flash the original stock recovery. Having the TWRP installed as mentioned earlier is blocking my path, and I have now tripped knox! So no more options available to access the unlock oem screen. Now frp is off, oem is on!
Also, I was wondering if anyone had thought about a totally updated version of the old "ALL IN ONE TOOL" which was available for some earlier makes of phone devices? I think due to manufacturers security upgrades of today's phones we could all do with something like this?
I heard you can do a NAND/Reset wipe via the Odin options screen which would allow you to install a new rom???
Oh, my predicament was based on Julius's post, not xReem. Sorry for the confusion.
klantee said:
No, to answer your first question, and yes used the patched version of Odin you state but with no joy.
(would another version of Odin be better for my device model?)
I just need to find a way to flash the original stock recovery. Having the TWRP installed as mentioned earlier is blocking my path, and I have now tripped knox! So no more options available to access the unlock oem screen. Now frp is off, oem is on!
Also, I was wondering if anyone had thought about a totally updated version of the old "ALL IN ONE TOOL" which was available for some earlier makes of phone devices? I think due to manufacturers security upgrades of today's phones we could all do with something like this?
I heard you can do a NAND/Reset wipe via the Odin options screen which would allow you to install a new rom???
Oh, my predicament was based on Julius's post, not xReem. Sorry for the confusion.
Click to expand...
Click to collapse
Sorry for your troubles - wish I could help you but you have done everything I would have tried. Maybe, if you haven't already done this - leave the phone on until the battery runs out completely. Then, recharge the phone for a while so the battery has some juice again and then get the phone back into download mode by pressing volume up and volume down at the same time - then plug in the USB - it shoul.d launch into download mode again - then try flashing again with the patched odin.
If you have already done this - then I don't know how what else to suggest.
I wish you luck and hope you are able to get things working again.
Geekser said:
Sorry for your troubles - wish I could help you but you have done everything I would have tried. Maybe, if you haven't already done this - leave the phone on until the battery runs out completely. Then, recharge the phone for a while so the battery has some juice again and then get the phone back into download mode by pressing volume up and volume down at the same time - then plug in the USB - it shoul.d launch into download mode again - then try flashing again with the patched odin.
If you have already done this - then I don't know how what else to suggest.
I wish you luck and hope you are able to get things working again.
Click to expand...
Click to collapse
Thanks for the advice. I'll try what you suggest and see what happens. Stay well!
Julius_GER said:
Hi guys,
I attached my brand new Galaxy S20 Ultra to my PC and started Smart Switch today. The Software showed an update for my device so I downloaded it and started the update process. Unfortunately, Smart Switch got stuck during the update process at 68%. Nothing happened, cables and all still attached. It just didn't proceed any further for hours.
I decided to take the path of stopping the process, using the key combination shown on my device. It now said, recover your device software with Smart Switch Emergency recovery function. I started this and guess what: it also stopped at 68%.
I "rebooted" the device (volume down + power for approx. 10 seconds) and it starts again in recovery mode.
I manually filled in the recovery code and it seemed like Smart Switch was downloading the OS again. Started the recovery process and it is stuck at 68% again.
Now I am just super afraid that I bricked the device by using Samsungs original software.
Anyone her to help or have similar experiences?
Thanks for any advice on how to proceed.
Julius
Click to expand...
Click to collapse
Hey Julius, did you get your phone to work. I am having the same issue.
Update:
I am good now. I was using the thunderbolt cable that came with the phone and update would get stuck at the same point everything with odin 3.13 and 3.14.
I used a USB 3 to thunderbolt cable that I had from an older phone and it work.
What I used:
Windows 10 x64 1909
USB 3 to thunderbolt cable
USB driver downloaded from Samsung support. I think it is the same driver that comes with smart switch because when I installed it, it prompted
to reinstall driver.
Odin3 v3.13.3_3B_PatcheD from here https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572. ( I think 3.14 will work too.
I really think the cable was the only problem)
Firmware downloaded with SamFirm
klantee said:
Thanks for the advice. I'll try what you suggest and see what happens. Stay well!
Click to expand...
Click to collapse
Open Odin as administrator and if using a stock AP file always use the HOME-CSC of the same firmware in CSC slot. Sometimes Odin plays the fool and gets stuck.
ASHLEY117 said:
Open Odin as administrator and if using a stock AP file always use the HOME-CSC of the same firmware in CSC slot. Sometimes Odin plays the fool and gets stuck.
Click to expand...
Click to collapse
Wow! This nearly worked!!!
Managed to get a (((PASS))) on Odin and my tab actually rebooted into the Samsung logo!!!
Soon after this though tab immediately Boots back into download mode??? Tried the same steps but without any progress???
I feel I'm close to cracking this but need some more advice on how to build on such "progress"!?
Many thanks for your advice...
klantee said:
Wow! This nearly worked!!!
Managed to get a (((PASS))) on Odin and my tab actually rebooted into the Samsung logo!!!
Soon after this though tab immediately Boots back into download mode??? Tried the same steps but without any progress???
I feel I'm close to cracking this but need some more advice on how to build on such "progress"!?
Many thanks for your advice...
Click to expand...
Click to collapse
Try with all slots filled but with CSC file not HOME-CSC. That may help as it flashes pit file to factory reset
ASHLEY117 said:
Try with all slots filled but with CSC file not HOME-CSC. That may help as it flashes pit file to factory reset
Click to expand...
Click to collapse
Tried your suggestion with no joy. Will keep trying though as I feel this issue can be cracked. Many thanks...
Geekser said:
Sorry for your troubles - wish I could help you but you have done everything I would have tried. Maybe, if you haven't already done this - leave the phone on until the battery runs out completely. Then, recharge the phone for a while so the battery has some juice again and then get the phone back into download mode by pressing volume up and volume down at the same time - then plug in the USB - it shoul.d launch into download mode again - then try flashing again with the patched odin.
If you have already done this - then I don't know how what else to suggest.
I wish you luck and hope you are able to get things working again.
Click to expand...
Click to collapse
(((SUCCESS)))!!! :laugh::laugh::laugh:
Done what you suggested by waiting until my battery ran out!
I downloaded a different software version and as soon as I plugged my tab into my PC with USB, i flashed the new software with no problems!!!
Flashed TWRP, Magisk and Multidisabler problemless the same!
The lesson learnt here...
...(ONLY FOR THOSE WHO KNOW WHAT THEY ARE DOING)...
...is to probably only have 30% battery when flashing!!! This way you won't have to wait weeks for such a large capacity battery to run down, like I did!
I knew I'd crack it!
klantee said:
(((SUCCESS)))!!! :laugh::laugh::laugh:
Done what you suggested by waiting until my battery ran out!
I downloaded a different software version and as soon as I plugged my tab into my PC with USB, i flashed the new software with no problems!!!
Flashed TWRP, Magisk and Multidisabler problemless the same!
The lesson learnt here...
...(ONLY FOR THOSE WHO KNOW WHAT THEY ARE DOING)...
...is to probably only have 30% battery when flashing!!! This way you won't have to wait weeks for such a large capacity battery to run down, like I did!
I knew I'd crack it!
Click to expand...
Click to collapse
Glad I could hel;p- I know how frustrating it is when things seem like you can never get things to work - anyway - best of luck - and be sure to hit thanks If I helped you.
Hi Do you lose your data (vids and pics) via this method? i have had same thing happen on my s20+