hello. can i install dual boot rom on my xioami mi 9se
Hi . Can I install Mi 11x rom on poco f3 ?
ulugbek_khojimatov_115 said:
Hi . Can I install Mi 11x rom on poco f3 ?
Click to expand...
Click to collapse
as long as it is stock rom no problem just be sure not to relock bootloader
Hi there,
After hours of searching online, with no result I have been forced to contact the Xiaomi factory directly.
My mi 10t pro recently had been bricked and as a last resort I was forced to flash the entire factory stock ROM again. However I have come to the conclusion that there is an underlying severe issue with the Xiaomi ROM format.
After flashing everything was working like before apart from several sensor modules. I will focus on the camera for the email.
Inside the camera app the cameras were not detected, I then launched CIT and there the cameras have given the error "camera list no match". This error can be traced back to the "persist.img" file within a BROM fastboot flash.
The mi 10t pro is part of the Apollo series which includes the smaller mi 10t and I have come to the conclusion that all publicly available fastboot ROMs have a persist.img suitable to the mi 10t and therefore when flashing it , the camera list includes in the persist.img are not matched with the hardware of the mi 10t pro. I have evidence for this.
Attached to this email is an image of a bootloader read of the default.prop file which I read to see what parameters were being set for my device.
As I suspected, the parameters being passed through the entire software was for mi 10t pro, the model the OS is designed around.
can someone please backup the persist file from their mi 10t pro and post it here for me to use please please, please. thankyou so much
Have a good day,
marzmln said:
Hi there,
After hours of searching online, with no result I have been forced to contact the Xiaomi factory directly.
My mi 10t pro recently had been bricked and as a last resort I was forced to flash the entire factory stock ROM again. However I have come to the conclusion that there is an underlying severe issue with the Xiaomi ROM format.
After flashing everything was working like before apart from several sensor modules. I will focus on the camera for the email.
Inside the camera app the cameras were not detected, I then launched CIT and there the cameras have given the error "camera list no match". This error can be traced back to the "persist.img" file within a BROM fastboot flash.
The mi 10t pro is part of the Apollo series which includes the smaller mi 10t and I have come to the conclusion that all publicly available fastboot ROMs have a persist.img suitable to the mi 10t and therefore when flashing it , the camera list includes in the persist.img are not matched with the hardware of the mi 10t pro. I have evidence for this.
Attached to this email is an image of a bootloader read of the default.prop file which I read to see what parameters were being set for my device.
As I suspected, the parameters being passed through the entire software was for mi 10t pro, the model the OS is designed around.
can someone please backup the persist file from their mi 10t pro and post it here for me to use please please, please. thankyou so much
Have a good day,
Click to expand...
Click to collapse
You can download the fastboot rom corresponding to your rom version and extract the img file.
https://xiaomirom.com/en/series/
I had the same problem with a Poco f2 (no more fingerprint) and flashing the persit img didn't change anything,
I used https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/ (Flash the same rom that was on your phone when you bought it) then the CIT.
thanks. so the poco f2 how did you fix it
marzmln said:
thanks. so the poco f2 how did you fix it
Click to expand...
Click to collapse
I think it's all in the post above.
NOSS8 said:
I think it's all in the post above.
Click to expand...
Click to collapse
ive tried doing that already but it didnt work and as you can see in my twrp terminal the rom literally just flashes the mi10t pros persist file which would explain why the camera list doesn't match as the 2 models have different cameras. hence i need to ask around for any mi 10t pro owners to directly send me their persist img so i can flash that instead.
marzmln said:
ive tried doing that already but it didnt work and as you can see in my twrp terminal the rom literally just flashes the mi10t pros persist file which would explain why the camera list doesn't match as the 2 models have different cameras. hence i need to ask around for any mi 10t pro owners to directly send me their persist img so i can flash that instead.
Click to expand...
Click to collapse
You have tried with MIFLASH with the same rom that was on your phone when you bought it?
NOSS8 said:
You have tried with MIFLASH with the same rom that was on your phone when you bought it?
Click to expand...
Click to collapse
i have tried flashing the stock rom but not with mi flash but i dont think it makes a difference because the persist.img is wrong anyways its for the mi10t but i have a mi 10t pro
marzmln said:
i have tried flashing the stock rom but not with mi flash but i dont think it makes a difference because the persist.img is wrong anyways its for the mi10t but i have a mi 10t pro
Click to expand...
Click to collapse
Persist img is in Fastboot rom .
The recovey zip=3.2gb
The fastboot tgz=5gB
So,you have a apollo but what version ?
NOSS8 said:
Persist img is in Fastboot rom .
The recovey zip=3.2gb
The fastboot tgz=5gB
So,you have a apollo but what version ?
Click to expand...
Click to collapse
i have a mi 10t pro and i know there is a persist img inside the fastboot ROM but please check the image i attached in the post. the persist file codes for the mi10t as you can see in the build prop the mi 10t model is passed into it from persist.
marzmln said:
i have a mi 10t pro and i know there is a persist img inside the fastboot ROM but please check the image i attached in the post. the persist file codes for the mi10t as you can see in the build prop the mi 10t model is passed into it from persist.
Click to expand...
Click to collapse
i know you have a mi 10t pro but which version?
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) China Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Europe (EEA) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) India (IN) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Indonesia (ID) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Russia (RU) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Taiwan (TW) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Turkey (TR) Fastboot & Recovery ROM
NOSS8 said:
i know you have a mi 10t pro but which version?
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) China Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Europe (EEA) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) India (IN) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Indonesia (ID) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Russia (RU) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Taiwan (TW) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Turkey (TR) Fastboot & Recovery ROM
Click to expand...
Click to collapse
eaa i tried flashing this already and it was successful but still camera list not match
marzmln said:
eaa i tried flashing this already and it was successful but still camera list not match
Click to expand...
Click to collapse
Did you flash this rom(V12.0.4.0.QJDEUXM) with Miflash?
Edit: Unroot the phone ,if necessary.
Please give me presist img file mi 10t
Hello Everyone, I am a user of the Xiaomi Mi 10T 5G Global model. My phone got updated to Android 12 and MIUI 13. It's around 3.2 GB Downloaded file. When I download and update the phone now my phone is not able to ON. Just Mi Logo is shown on the dim screen. What can I do please suggest?
Thanks
Is the hardware of Poco F3 and Mi 11x same? Since I am unable to use Jio 5G on 11x (it needs n28), will it work on Poco F3 firmware, which supports it? Thanks
brokehorcux said:
Is the hardware of Poco F3 and Mi 11x same? Since I am unable to use Jio 5G on 11x (it needs n28), will it work on Poco F3 firmware, which supports it? Thanks
Click to expand...
Click to collapse
No, the hardware is not the same. The first indication should be that the Mi 11x doesn't have NFC while the Poco F3 does.
Mi 11x loses some functions/features by flashing a global variant (they can be brought back with root modules but other hidden bugs we dont know could be existent)