Hi there,
After hours of searching online, with no result I have been forced to contact the Xiaomi factory directly.
My mi 10t pro recently had been bricked and as a last resort I was forced to flash the entire factory stock ROM again. However I have come to the conclusion that there is an underlying severe issue with the Xiaomi ROM format.
After flashing everything was working like before apart from several sensor modules. I will focus on the camera for the email.
Inside the camera app the cameras were not detected, I then launched CIT and there the cameras have given the error "camera list no match". This error can be traced back to the "persist.img" file within a BROM fastboot flash.
The mi 10t pro is part of the Apollo series which includes the smaller mi 10t and I have come to the conclusion that all publicly available fastboot ROMs have a persist.img suitable to the mi 10t and therefore when flashing it , the camera list includes in the persist.img are not matched with the hardware of the mi 10t pro. I have evidence for this.
Attached to this email is an image of a bootloader read of the default.prop file which I read to see what parameters were being set for my device.
As I suspected, the parameters being passed through the entire software was for mi 10t pro, the model the OS is designed around.
can someone please backup the persist file from their mi 10t pro and post it here for me to use please please, please. thankyou so much
Have a good day,
marzmln said:
Hi there,
After hours of searching online, with no result I have been forced to contact the Xiaomi factory directly.
My mi 10t pro recently had been bricked and as a last resort I was forced to flash the entire factory stock ROM again. However I have come to the conclusion that there is an underlying severe issue with the Xiaomi ROM format.
After flashing everything was working like before apart from several sensor modules. I will focus on the camera for the email.
Inside the camera app the cameras were not detected, I then launched CIT and there the cameras have given the error "camera list no match". This error can be traced back to the "persist.img" file within a BROM fastboot flash.
The mi 10t pro is part of the Apollo series which includes the smaller mi 10t and I have come to the conclusion that all publicly available fastboot ROMs have a persist.img suitable to the mi 10t and therefore when flashing it , the camera list includes in the persist.img are not matched with the hardware of the mi 10t pro. I have evidence for this.
Attached to this email is an image of a bootloader read of the default.prop file which I read to see what parameters were being set for my device.
As I suspected, the parameters being passed through the entire software was for mi 10t pro, the model the OS is designed around.
can someone please backup the persist file from their mi 10t pro and post it here for me to use please please, please. thankyou so much
Have a good day,
Click to expand...
Click to collapse
You can download the fastboot rom corresponding to your rom version and extract the img file.
https://xiaomirom.com/en/series/
I had the same problem with a Poco f2 (no more fingerprint) and flashing the persit img didn't change anything,
I used https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/ (Flash the same rom that was on your phone when you bought it) then the CIT.
thanks. so the poco f2 how did you fix it
marzmln said:
thanks. so the poco f2 how did you fix it
Click to expand...
Click to collapse
I think it's all in the post above.
NOSS8 said:
I think it's all in the post above.
Click to expand...
Click to collapse
ive tried doing that already but it didnt work and as you can see in my twrp terminal the rom literally just flashes the mi10t pros persist file which would explain why the camera list doesn't match as the 2 models have different cameras. hence i need to ask around for any mi 10t pro owners to directly send me their persist img so i can flash that instead.
marzmln said:
ive tried doing that already but it didnt work and as you can see in my twrp terminal the rom literally just flashes the mi10t pros persist file which would explain why the camera list doesn't match as the 2 models have different cameras. hence i need to ask around for any mi 10t pro owners to directly send me their persist img so i can flash that instead.
Click to expand...
Click to collapse
You have tried with MIFLASH with the same rom that was on your phone when you bought it?
NOSS8 said:
You have tried with MIFLASH with the same rom that was on your phone when you bought it?
Click to expand...
Click to collapse
i have tried flashing the stock rom but not with mi flash but i dont think it makes a difference because the persist.img is wrong anyways its for the mi10t but i have a mi 10t pro
marzmln said:
i have tried flashing the stock rom but not with mi flash but i dont think it makes a difference because the persist.img is wrong anyways its for the mi10t but i have a mi 10t pro
Click to expand...
Click to collapse
Persist img is in Fastboot rom .
The recovey zip=3.2gb
The fastboot tgz=5gB
So,you have a apollo but what version ?
NOSS8 said:
Persist img is in Fastboot rom .
The recovey zip=3.2gb
The fastboot tgz=5gB
So,you have a apollo but what version ?
Click to expand...
Click to collapse
i have a mi 10t pro and i know there is a persist img inside the fastboot ROM but please check the image i attached in the post. the persist file codes for the mi10t as you can see in the build prop the mi 10t model is passed into it from persist.
marzmln said:
i have a mi 10t pro and i know there is a persist img inside the fastboot ROM but please check the image i attached in the post. the persist file codes for the mi10t as you can see in the build prop the mi 10t model is passed into it from persist.
Click to expand...
Click to collapse
i know you have a mi 10t pro but which version?
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) China Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Europe (EEA) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) India (IN) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Indonesia (ID) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Russia (RU) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Taiwan (TW) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Turkey (TR) Fastboot & Recovery ROM
NOSS8 said:
i know you have a mi 10t pro but which version?
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) China Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Europe (EEA) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) India (IN) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Indonesia (ID) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Russia (RU) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Taiwan (TW) Fastboot & Recovery ROM
Redmi K30S Ultra / Mi 10T / Mi 10T Pro (apollo) Turkey (TR) Fastboot & Recovery ROM
Click to expand...
Click to collapse
eaa i tried flashing this already and it was successful but still camera list not match
marzmln said:
eaa i tried flashing this already and it was successful but still camera list not match
Click to expand...
Click to collapse
Did you flash this rom(V12.0.4.0.QJDEUXM) with Miflash?
Edit: Unroot the phone ,if necessary.
Please give me presist img file mi 10t
Related
Last time i checked, ( 10 minutes before posting this), The specs for Mi A2 Lite and Redmi 6 pro are totally the same, except the network bands. We can even assume that Redmi 6 pro is just rebranded version of Mi A2 Lite for India (and some other countries where they are being sold, if any). So, is it at all possible to flash that Android one directly into Redmi 6 pro, or do we need to make some modifications to the package.
Another short question...(as am a newbie and i would like the community to push my knowledge limit a little further). Is it at all possible to flash android one on to any other phone, whatever the specs maybe(same and different).
Edit - I found some interesting facts - Mi A2 Lite is indeed the Global version of Redmi 6 pro
- Redmi 6 pro uses a classic partitioning system while A2 lite uses the A/B system. So direct flashing the stock android one rom will brick it.
New questions - is there any ways to change the partition system from one to the other?
is there some way, we 'stock rom' lust hounds get a hand on it using this 6 pro?
And did you think about the notch?
Mi a2 rom
Did it work
Jay: Did you try A2 or A2 Lite?
Getting trouble while downloading miui 11.0.7.0 version in my redmi 6 pro
Getting trouble while downloading miui 11.0.7.0 update in my redmi 6 pro
Astrek said:
Last time i checked, ( 10 minutes before posting this), The specs for Mi A2 Lite and Redmi 6 pro are totally the same, except the network bands. We can even assume that Redmi 6 pro is just rebranded version of Mi A2 Lite for India (and some other countries where they are being sold, if any). So, is it at all possible to flash that Android one directly into Redmi 6 pro, or do we need to make some modifications to the package.
Another short question...(as am a newbie and i would like the community to push my knowledge limit a little further). Is it at all possible to flash android one on to any other phone, whatever the specs maybe(same and different).
Edit - I found some interesting facts - Mi A2 Lite is indeed the Global version of Redmi 6 pro
- Redmi 6 pro uses a classic partitioning system while A2 lite uses the A/B system. So direct flashing the stock android one rom will brick it.
New questions - is there any ways to change the partition system from one to the other?
is there some way, we 'stock rom' lust hounds get a hand on it using this 6 pro?
Click to expand...
Click to collapse
Basically you can't flash Android one version of daisy on sakura. You can port android one for sakura or install a previous one which is ported and almost works fine.
Astrek said:
Last time i checked, ( 10 minutes before posting this), The specs for Mi A2 Lite and Redmi 6 pro are totally the same, except the network bands. We can even assume that Redmi 6 pro is just rebranded version of Mi A2 Lite for India (and some other countries where they are being sold, if any). So, is it at all possible to flash that Android one directly into Redmi 6 pro, or do we need to make some modifications to the package.
Another short question...(as am a newbie and i would like the community to push my knowledge limit a little further). Is it at all possible to flash android one on to any other phone, whatever the specs maybe(same and different).
Edit - I found some interesting facts - Mi A2 Lite is indeed the Global version of Redmi 6 pro
- Redmi 6 pro uses a classic partitioning system while A2 lite uses the A/B system. So direct flashing the stock android one rom will brick it.
New questions - is there any ways to change the partition system from one to the other?
is there some way, we 'stock rom' lust hounds get a hand on it using this 6 pro?
Click to expand...
Click to collapse
Hey! I've been thinking the same thing, and I've tinkered around the fastboot stock images for both the A2 Lite and the 6 Pro. The stock image for Daisy contains a img named "partition" and I think this is what makes the A/B partition in the phone. I haven't tried it, But I'm think of doing it. editing all the flash_all.sh files in the Android One ROM from the A2 Lite, i.e replacing all codename "daisy" with "sakura" so it doesn't throw a invalid device error. I'll update
Kaydeeshgrr said:
Hey! I've been thinking the same thing, and I've tinkered around the fastboot stock images for both the A2 Lite and the 6 Pro. The stock image for Daisy contains a img named "partition" and I think this is what makes the A/B partition in the phone. I haven't tried it, But I'm think of doing it. editing all the flash_all.sh files in the Android One ROM from the A2 Lite, i.e replacing all codename "daisy" with "sakura" so it doesn't throw a invalid device error. I'll update
Click to expand...
Click to collapse
how were you able to flash the android one rom i also want to put it on my redmi 6 pro
Hello a2-lite users,
I found someone ported miui rom from (6X) to A2 by replace files betwen devices software HERE.
So, I think we can do same thing to port miui from (Redmi 6 pro) to our global version because these same devices with different versions.
We cant wait any more,
I need some support only cuz I'm not developer.
Thanks!
Reserved
Please port MIUI 10 rom to Mi A2 Lite.
Sent from my Mi A2 Lite
Nurullah55 said:
Please port MIUI 10 rom to Mi A2 Lite.
Sent from my Mi A2 Lite
Click to expand...
Click to collapse
It's not esay, But possible.
So, Be patient and follow us.
So interested
I also wish to have miui on my device (MI A2 LITE)
Interested
interested
prog_emmc_firehose_8953_ddr.mbn
(copy this file from stock image to miui 9)
do the same thing in the a2 forum but change this files and test please...
also get the miui 9 fastboot for redmi 6 pro here https://en.miui.com/thread-2996599-1-1.html
Anyone Succeeded To Port MIUI Rom In A2 Lite ?
Anyone? I wish to have miui on my Xiaomi Mi A2 Lite! Please!
If any developer wants to convert the MIUI rom it will be done, XDA is no place to demand stuff and/or for begging.
im so excited for miui 10 on a2 lite
HaN5aR said:
It's not esay, But possible.
So, Be patient and follow us.
Click to expand...
Click to collapse
Im so excited for miui 10 on a2 lite, cant wait!!
thezenfone3guy said:
prog_emmc_firehose_8953_ddr.mbn
(copy this file from stock image to miui 9)
do the same thing in the a2 forum but change this files and test please...
also get the miui 9 fastboot for redmi 6 pro here https://en.miui.com/thread-2996599-1-1.html
Click to expand...
Click to collapse
Does thiw method work, im a bit afraid to do this. But did you test it?
peoeope said:
Does thiw method work, im a bit afraid to do this. But did you test it?
Click to expand...
Click to collapse
This options works but your phone stay in bootloop and locked bootloader as xioami redmi 6 pro
oh ok
szymus999 said:
This options works but your phone stay in bootloop and locked bootloader as xioami redmi 6 pro
Click to expand...
Click to collapse
Oh, okay, thanks, im not trying that then
szymus999 said:
This options works but your phone stay in bootloop and locked bootloader as xioami redmi 6 pro
Click to expand...
Click to collapse
Can you then apply for bootloader unlock at mi forums as if it was always a redmi 6 pro? Or use miflash version that bypass mi account?
szymus999 said:
This options works but your phone stay in bootloop and locked bootloader as xioami redmi 6 pro
Click to expand...
Click to collapse
Thanks for the feedback on the method. Could you also share with us on this thread when/if you find a way to put MIUI on Mi a2 lite?
Hello readers,
i've bought an A2 lite for testing purposes and was also interested in modding the device - rund MIUI on it would be fantastic.
After reading some posts here and in the Mi A2 thread i thought i was ready to try the transformation
Unlocked the A2 lite, prepared the fastboot images.
I tried it with older Android 8.1 images dated July 2018 because they had the same Version state V9.4.x.x and to avoid a brick because of the later introduced Anti-Rollback function.
Sadly the partition information & structure of the Mi A2 and the Mi A2 lite differs in some very important parts (partition scheme & image file type).
There is missing at least one corresponding image file/partition on the A2 lite compared to the A2.
Tried to get to know if there is any possible alternate image to choose but was not successful.
Flashing failed everytime therefore i tried to go the way vice versa
Took the flash files from the Redmi 6 Pro and the ddr & bootloader files from Mi A2 lite.
Changed the checksums and flashed that bundle.
Flashing SEEMED to be successful desvice rebooted and BECAME A WONDERFUL BRICK on my desk.
Conclusion: Kids don't try this at home!
It was not possible to tun the device on again!
... have not tried to open the device and go to EDL-Mode because of the fact that there was no life sign from device at all.
I'll try some other methods within the next weeks with a new unit arrived a couple of days ago but we may have to accept that an conversion is not possible.
raupe said:
Hello readers,
i've bought an A2 lite for testing purposes and was also interested in modding the device - rund MIUI on it would be fantastic.
After reading some posts here and in the Mi A2 thread i thought i was ready to try the transformation
Unlocked the A2 lite, prepared the fastboot images.
I tried it with older Android 8.1 images dated July 2018 because they had the same Version state V9.4.x.x and to avoid a brick because of the later introduced Anti-Rollback function.
Sadly the partition information & structure of the Mi A2 and the Mi A2 lite differs in some very important parts (partition scheme & image file type).
There is missing at least one corresponding image file/partition on the A2 lite compared to the A2.
Tried to get to know if there is any possible alternate image to choose but was not successful.
Flashing failed everytime therefore i tried to go the way vice versa
Took the flash files from the Redmi 6 Pro and the ddr & bootloader files from Mi A2 lite.
Changed the checksums and flashed that bundle.
Flashing SEEMED to be successful desvice rebooted and BECAME A WONDERFUL BRICK on my desk.
Conclusion: Kids don't try this at home!
It was not possible to tun the device on again!
... have not tried to open the device and go to EDL-Mode because of the fact that there was no life sign from device at all.
I'll try some other methods within the next weeks with a new unit arrived a couple of days ago but we may have to accept that an conversion is not possible.
Click to expand...
Click to collapse
Please let us know.
Thank you! :good:
the system has been destroyed mi a2 lite
monalolo said:
the system has been destroyed mi a2 lite
Click to expand...
Click to collapse
Try to flash mi tools and flash back to stock
You only need to reflash stock kernel via fastboot...
hi there
i heared that MI A2 Lite is the Global Version of Redmi 6 Pro .
so can I flash Redmi 6 Pro fastboot rom on mi a2 lite ?!
#MmdRza said:
so can I flash Redmi 6 Pro fastboot rom on mi a2 lite ?!
Click to expand...
Click to collapse
No, you can't. Both phones use different partition schemes.
Twrp for mi 10T lite : https://androidfilehost.com/?fid=17248734326145709617
installed and working properly, thanks
I've got a problem: folder names in /scare are completely scrambled (consisting of 20-ish random characters), otherwise no more problems spotted
Stopperan said:
I've got a problem: folder names in /scare are completely scrambled (consisting of 20-ish random characters), otherwise no more problems spotted
Click to expand...
Click to collapse
think that is encryption-format data partition-then reboot to recovery but saying this out of experience on other devices as still waiting to b/l unlock mine. Read up twrp data format partition and encryption on other similar devices.
jinx11 said:
Twrp for mi 10T lite : https://androidfilehost.com/?fid=17248734326145709617
Click to expand...
Click to collapse
will this work on note 9 pro 5g?
Gothric said:
will this work on note 9 pro 5g?
Click to expand...
Click to collapse
Redmi Note 9 Pro 5G (China) TWRP?
I'm looking for TWRP for the Redmi Note 9 Pro 5G; to be able to install the new weekly Rom that they have published; but I can't find the TWRP image for my device. According to the latest weekly roms. It can be seen that the ROM for is the same ROM for the . My question is... Can I use the...
xiaomi.eu