Samsung Galaxy Watch(SM-R500) reactivation lock oases - Samsung Galaxy Watch

So I have this R500 watch which is locked On reactivation screen. And with the help of previous post I was able to flash combination and debug. The issue is I have now run sdb commands successfully but afer its reboots to download mode it still shows reactivation lock :ON
Any help please

Is your watch stuck to odin mode too? I got mine bricked. Maybe you could help me to flash original firmware. Thanks

Related

Bootloop help

Hi, my sister's GT-I9195 got bricked suddenly some days after she OTA upgraded to 4.4.2. As I live in another city, she left the phone thinking it was dead for months.
I noticed it could enter download mode and left it charging then tried every alternative method I found through Odin by flashing different firmwares, and the unbricking guide for BL v1. All of them ended in bootloop, even if I flash a recovery tool like Philz Touch it does not enter the recovery I've just installed, it shows a blue message on top of screen and bootloop again.
I know it is bootloader ap swrev: 2, then I can only flash firmwares with v2 bootloader, but the one recommended is UBUBNE2, and this one has not get me out of bootloop to. The phone is still Knox 0x0 but I don't know if it may help in the question.
If anyone has a light over this I would be very grateful cause I'm stuck now.
vitor6496 said:
Hi, my sister's GT-I9195 got bricked suddenly some days after she OTA upgraded to 4.4.2. As I live in another city, she left the phone thinking it was dead for months.
I noticed it could enter download mode and left it charging then tried every alternative method I found through Odin by flashing different firmwares, and the unbricking guide for BL v1. All of them ended in bootloop, even if I flash a recovery tool like Philz Touch it does not enter the recovery I've just installed, it shows a blue message on top of screen and bootloop again.
I know it is bootloader ap swrev: 2, then I can only flash firmwares with v2 bootloader, but the one recommended is UBUBNE2, and this one has not get me out of bootloop to. The phone is still Knox 0x0 but I don't know if it may help in the question.
If anyone has a light over this I would be very grateful cause I'm stuck now.
Click to expand...
Click to collapse
Hi all, I think have the some problem.
Tried flash several Roms and recovery images (CWN) but the phone stills bootloop.
With ODIN flash dive succes or pass message but same issue after reboot .
When enter in downloading mode i get some information..... "WRITE POTECTION:ENABLED" ,how can i disable this protection ?
AV and firewall disabled.
Any ideas ?

Need some serious help with frp lock

Hi! My Note 7 n930f stuck after I switched off. It always says "custom binary blocked by frp lock". So it wont boot ir wont let me into twrp and so. P. S. Phone is rooted. I have tryied so many tricks to solve this problem. But nothing happens. Even odin wont help me with rescue firmware... It stucks and also writes about frp lock. When I start the update it stops at system.img.ext4 and in phone download screen appears "custom binary(boot) blocked by frp lock...
Please help. If someone will help me I will give 50$$$!!!!!!
mantasakys said:
Hi! My Note 7 n930f stuck after I switched off. It always says "custom binary blocked by frp lock". So it wont boot ir wont let me into twrp and so. P. S. Phone is rooted. I have tryied so many tricks to solve this problem. But nothing happens. Even odin wont help me with rescue firmware... It stucks and also writes about frp lock. When I start the update it stops at system.img.ext4 and in phone download screen appears "custom binary(boot) blocked by frp lock...
Please help. If someone will help me I will give 50$$$!!!!!!
Click to expand...
Click to collapse
Seems you forgot to set the OEM unlock switch to 'on' or tampered with in any way.
The only way to get your phone back working is to flash an original stock rom.
Which one is working depends on the original frimware level you had before (exact firmware code needed), since you can't downgrade to an earlier baseband level.
Please post this information and let me look if I have a matching fimware for you.
If so, I can upload to your cloud storage like google drive etc.
Hello, I also have similar problem with note 7 sn930fd running note fe rom. I switched oem unlock off to test magisk and forgot to turn back on. Frp issue on restarting the phone. Now it can only boot to download mode. I attempted Odin with official firmware but failed. I got Sw Rev check fail device 3 binary 1. I am assuming that's because it's not the correct firmware? If so what's the correct firmware to download?
thanks
John
Thank you all. Problem resolved
mantasakys said:
Hi! My Note 7 n930f stuck after I switched off. It always says "custom binary blocked by frp lock". So it wont boot ir wont let me into twrp and so. P. S. Phone is rooted. I have tryied so many tricks to solve this problem. But nothing happens. Even odin wont help me with rescue firmware... It stucks and also writes about frp lock. When I start the update it stops at system.img.ext4 and in phone download screen appears "custom binary(boot) blocked by frp lock...
Please help. If someone will help me I will give 50$$$!!!!!!
Click to expand...
Click to collapse
you find the correct firmware here in this page or look for the same firmware posted elswhere. when you flashed send me 50$.
https://forum.xda-developers.com/note-7/help/n930fxxu3bpl2-t3520988/page2

Realme 3 RMX1821 Bricked

Hello all,
Hope that everyone will be safe and healthy.
I have bricked my Realme 3 RMX1821 and would be grateful for any help to get it working back again.
Event Summary: I unlocked its bootloader with the help of Realme Tool and then installed TWRP recovery and Magisk. All worked fine. Later on due to some reasons I uninstalled Magisk and then attempted to Lock the bootloader with TWRP installed.
Immediately after the bootloader was locked my phone was rebooted and a warning screen appeared saying “Charging Overtime”. Now I tried to turn off the phone and restarted it with Volume Down button pressed. Still the same screen with an additional message in the corner saying “Recovery Mode”. Under both the cases no other button works and I have to power it off.
Support centers are all closed due to current virus issues and I need this phone really badly.
Will be grateful if someone may help me out.
Thanks!
You should never lock your bootloader with custom recovery installed
Try unlock bootloader using fastboot
about realme 3 charging overtime error
kprsnt said:
You should never lock your bootloader with custom recovery installed
Try unlock bootloader using fastboot
Click to expand...
Click to collapse
unale to boot into fastboot mode please give me some suggestion please
i have the same problem i cant go to fastboot mode and recovery mode the best to fix this to flash the stock firmware but the tools need a ID and Pass to used it.
i have realme 3 rmx1821 i tried the bypass the pass but it wont work theirs a error
realme 3 bricked
Ibno Hamid VI said:
i have the same problem i cant go to fastboot mode and recovery mode the best to fix this to flash the stock firmware but the tools need a ID and Pass to used it.
i have realme 3 rmx1821 i tried the bypass the pass but it wont work theirs a error
Click to expand...
Click to collapse
bro tell the name of the tool
my be msmdownload tool
mfahad said:
Hello all,
Hope that everyone will be safe and healthy.
I have bricked my Realme 3 RMX1821 and would be grateful for any help to get it working back again.
Event Summary: I unlocked its bootloader with the help of Realme Tool and then installed TWRP recovery and Magisk. All worked fine. Later on due to some reasons I uninstalled Magisk and then attempted to Lock the bootloader with TWRP installed.
Immediately after the bootloader was locked my phone was rebooted and a warning screen appeared saying “Charging Overtime”. Now I tried to turn off the phone and restarted it with Volume Down button pressed. Still the same screen with an additional message in the corner saying “Recovery Mode”. Under both the cases no other button works and I have to power it off.
Support centers are all closed due to current virus issues and I need this phone really badly.
Will be grateful if someone may help me out.
Thanks!
Click to expand...
Click to collapse
Go to the Realme services center

i need huge help!!

hello guys. after a update my redmi note 8 pro (global) cannot boot. i can only get on fastboot but i never open my bootloader. i cannot get to recovery mode with vol up + power no matter how hard i try. what can i do? i cannot flash from mitool with locked bootloader i guess cause i get a stupid error.
Unlock the bootloader first.
https://en.miui.com/unlock/
It's pretty easy to fix if you can enter into fastboot mode but in my case situation is very different my device is completely dead/hard brick just notification light blinks, & only the solution is to get the MI Authorized Account & i don't have :crying: if Someone can help me please help
try with EDL mode ..
you can flash without unlock bootloader
it only works if you are actually updating from your own device and not by manual updating because you chose the MIUI ROM file incorrectly

Question Black screen after firmware update.

Good day. After an incorrect firmware update through mtkclient, the Rui 3 screen turned black and does not display anything. Replacement of the screen did not help. We tried to flash official firmware from the website, but it didn't work. If possible, please share lk2.bin so we can try to flash it. We have run out of ideas on how to revive the phone.Successfully entered and flashed in brom mode.
Sorry to inform you but based on my knowledge it is impossible to flash this phone!How do you entered brom mode ? Because i tried and it didn't worked for me!

Categories

Resources