Good day. After an incorrect firmware update through mtkclient, the Rui 3 screen turned black and does not display anything. Replacement of the screen did not help. We tried to flash official firmware from the website, but it didn't work. If possible, please share lk2.bin so we can try to flash it. We have run out of ideas on how to revive the phone.Successfully entered and flashed in brom mode.
Sorry to inform you but based on my knowledge it is impossible to flash this phone!How do you entered brom mode ? Because i tried and it didn't worked for me!
Related
Hello Team
i did mistake, i downgrade phone by octuplus box and now stuck here,
your device is corrupt. it cannot be trusted
and will not boot/
phone not going in download mode,
only when try with vol+ to enter in download mode, its show download mode screen for 1sec and then back to this error, please tell me how to solve out this problem.
by Jtag this device not supported yet Because of new UFS IC.
Best Regards
Arslan
Try flash Zv8 with LG Up 1.11
If you have error , try another PC
Stuck on Same issue
Arslan1988 said:
Hello Team
i did mistake, i downgrade phone by octuplus box and now stuck here,
your device is corrupt. it cannot be trusted
and will not boot/
phone not going in download mode,
only when try with vol+ to enter in download mode, its show download mode screen for 1sec and then back to this error, please tell me how to solve out this problem.
by Jtag this device not supported yet Because of new UFS IC.
Best Regards
Arslan
Click to expand...
Click to collapse
Have you got Any Fix yet ? because i also did the same with my ls992 now my phone is not going in download mode its just showing you device is crupt with this link ((g.co/ABH)), it will fix when we get the ota update latest version of nougat, and i am searching for tha Ota file of OBV if any one tell where can i find the ota file that can flash with stock recovery otherwise my device will stay dead
Hello there I had just unlocked the bootloader yesterday and flashed an Oreo ROM without updating base bands and now my device doesn't boot up it just shows the bootlogo and turns off again in less than a second it doesn't even charge, good thing is I am able to go to edl mode I guess but then when I tried qfil and mi flash to flash stock rom i m getting the sahara cannot detect com port handle error and the system cannot find the file specified error in mi flash please help its just been a week since I got this phone
Solution
Chin_hebbar said:
Hello there I had just unlocked the bootloader yesterday and flashed an Oreo ROM without updating base bands and now my device doesn't boot up it just shows the bootlogo and turns off again in less than a second it doesn't even charge, good thing is I am able to go to edl mode I guess but then when I tried qfil and mi flash to flash stock rom i m getting the sahara cannot detect com port handle error and the system cannot find the file specified error in mi flash please help its just been a week since I got this phone
Click to expand...
Click to collapse
I've used MiFlash Tool, and the problem was fixed. Sahara Error occurs when you take to much time to flash after booting to EDL, you only have few seconds to flash util the port is closed for writing. QFIL takes around 20 to 25 seconds in caching the files so use MiFlash and It'll flash. Best way to do it is:
1. Install and setup MiFlash for flashing.
2. Open MiFlash and select your Firmware's folder.
3. As soon as you connect the phone refresh miflash and hit flash.
If everything goes well you'll flash will be successful else try again.
I tried doing as fast as a could too on mi flash and it would come up as trying to connect to com4 port something in the status and would eventually come back to same error in the picture.
Chin_hebbar said:
I tried doing as fast as a could too on mi flash and it would come up as trying to connect to com4 port something in the status and would eventually come back to same error in the picture.
Click to expand...
Click to collapse
I need to flash Baseband for Oreo. Please guide me
windows 10 problem
Chin_hebbar said:
Hello there I had just unlocked the bootloader yesterday and flashed an Oreo ROM without updating base bands and now my device doesn't boot up it just shows the bootlogo and turns off again in less than a second it doesn't even charge, good thing is I am able to go to edl mode I guess but then when I tried qfil and mi flash to flash stock rom i m getting the sahara cannot detect com port handle error and the system cannot find the file specified error in mi flash please help its just been a week since I got this phone
Click to expand...
Click to collapse
I face this problem in windows 10.
first uninstall zuk drivers and qfill and disable driver signature enforcement (Google it how to do it) then install zuk drivers and qfill use original cable and your phone will get flashed
Balaji Sriram said:
I need to flash Baseband for Oreo. Please guide me
Click to expand...
Click to collapse
Follow the instruction from this post
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/zuk-z2-baseband-flashing-guide-t3715121
Do not listen to anyone telling you to use miflash, only use qfil otherwise you WILL encounter other issues because qfil is the only way to reach the deeper partitions that mi is unable to... Other issues may range from no volte, calling or signal problems etc its just easier to do it right the first time.
Hi! My Note 7 n930f stuck after I switched off. It always says "custom binary blocked by frp lock". So it wont boot ir wont let me into twrp and so. P. S. Phone is rooted. I have tryied so many tricks to solve this problem. But nothing happens. Even odin wont help me with rescue firmware... It stucks and also writes about frp lock. When I start the update it stops at system.img.ext4 and in phone download screen appears "custom binary(boot) blocked by frp lock...
Please help. If someone will help me I will give 50$$$!!!!!!
mantasakys said:
Hi! My Note 7 n930f stuck after I switched off. It always says "custom binary blocked by frp lock". So it wont boot ir wont let me into twrp and so. P. S. Phone is rooted. I have tryied so many tricks to solve this problem. But nothing happens. Even odin wont help me with rescue firmware... It stucks and also writes about frp lock. When I start the update it stops at system.img.ext4 and in phone download screen appears "custom binary(boot) blocked by frp lock...
Please help. If someone will help me I will give 50$$$!!!!!!
Click to expand...
Click to collapse
Seems you forgot to set the OEM unlock switch to 'on' or tampered with in any way.
The only way to get your phone back working is to flash an original stock rom.
Which one is working depends on the original frimware level you had before (exact firmware code needed), since you can't downgrade to an earlier baseband level.
Please post this information and let me look if I have a matching fimware for you.
If so, I can upload to your cloud storage like google drive etc.
Hello, I also have similar problem with note 7 sn930fd running note fe rom. I switched oem unlock off to test magisk and forgot to turn back on. Frp issue on restarting the phone. Now it can only boot to download mode. I attempted Odin with official firmware but failed. I got Sw Rev check fail device 3 binary 1. I am assuming that's because it's not the correct firmware? If so what's the correct firmware to download?
thanks
John
Thank you all. Problem resolved
mantasakys said:
Hi! My Note 7 n930f stuck after I switched off. It always says "custom binary blocked by frp lock". So it wont boot ir wont let me into twrp and so. P. S. Phone is rooted. I have tryied so many tricks to solve this problem. But nothing happens. Even odin wont help me with rescue firmware... It stucks and also writes about frp lock. When I start the update it stops at system.img.ext4 and in phone download screen appears "custom binary(boot) blocked by frp lock...
Please help. If someone will help me I will give 50$$$!!!!!!
Click to expand...
Click to collapse
you find the correct firmware here in this page or look for the same firmware posted elswhere. when you flashed send me 50$.
https://forum.xda-developers.com/note-7/help/n930fxxu3bpl2-t3520988/page2
Hello,
I received my phone two weeks ago (BND-L21 version) and Friday I tried to manually update it to Oreo (with this topic : https://forum.xda-developers.com/honor-7x/how-to/manual-update-to-oreo-beta-emui-8-bnd-t3767044). I don't know what I did wrong but it didn't work (my phone didn't reboot on the stock recovery, only on TWRP). After a few try, my phone wasn't booting anymore, it was stuck on the orange message about the unlocked bootlader and the message "Your device is booting...".
I managed to get it back working with this topic : https://forum.xda-developers.com/honor-7x/development/firmware-updates-link-flash-risk-t3723810. The problem now is that I'm stuck with the chinese firmware (i don't have the Honor animation when my system is booting, I now have an Android logo on a black background). I don't have any Gapps installed and I can't flash anything with TWRP. When I try to flash SuperSU, i have an error extracting ramdisk failure and something with the boot.img.
Now the model of my phone is a generic_a15 and I don't know how to get back on track.
I'm a little bit desperate now, I don't know how to install another firmware. I tried to install this custom rom : https://forum.xda-developers.com/honor-7x/development/openkirin-aosp-8-0-honor-7x-t3746257 but I was stuck on the orange message again.
If anybody knows how to solve my problems, I'll be grateful
Thanks !
[UPDATE] I don't know if someone is reading but now my phone doesn't boot anymore and FRP is locked ?
Call Huawei customer support and get a ticket started to send your phone to the nearest repair center. Best of luck!
Waagic said:
Hello,
I received my phone two weeks ago (BND-L21 version) and Friday I tried to manually update it to Oreo (with this topic : https://forum.xda-developers.com/honor-7x/how-to/manual-update-to-oreo-beta-emui-8-bnd-t3767044). I don't know what I did wrong but it didn't work (my phone didn't reboot on the stock recovery, only on TWRP). After a few try, my phone wasn't booting anymore, it was stuck on the orange message about the unlocked bootlader and the message "Your device is booting...".
I managed to get it back working with this topic : https://forum.xda-developers.com/honor-7x/development/firmware-updates-link-flash-risk-t3723810. The problem now is that I'm stuck with the chinese firmware (i don't have the Honor animation when my system is booting, I now have an Android logo on a black background). I don't have any Gapps installed and I can't flash anything with TWRP. When I try to flash SuperSU, i have an error extracting ramdisk failure and something with the boot.img.
Now the model of my phone is a generic_a15 and I don't know how to get back on track.
I'm a little bit desperate now, I don't know how to install another firmware. I tried to install this custom rom : https://forum.xda-developers.com/honor-7x/development/openkirin-aosp-8-0-honor-7x-t3746257 but I was stuck on the orange message again.
If anybody knows how to solve my problems, I'll be grateful
Thanks !
[UPDATE] I don't know if someone is reading but now my phone doesn't boot anymore and FRP is locked ?
Click to expand...
Click to collapse
Guys i kid you not, not a single link on the whole internet, i flashed the wrong version through mi flash and now device has black screen and gets to fastboot only and cant get to edl mode, i wanna do a test point but i dont have the firmware PLEASE HELP
What firmware you need? EU or NA?
can you still get into the bootloader where you can do a factory reset?
I too am facing the same issue, Had any one resolved this issue?
usefmalkawi said:
Guys i kid you not, not a single link on the whole internet, i flashed the wrong version through mi flash and now device has black screen and gets to fastboot only and cant get to edl mode, i wanna do a test point but i dont have the firmware PLEASE HELP
Click to expand...
Click to collapse
flash stock rom. available on the redmagic website under support/global roms