Need some serious help with frp lock - Note 7 Questions & Answers

Hi! My Note 7 n930f stuck after I switched off. It always says "custom binary blocked by frp lock". So it wont boot ir wont let me into twrp and so. P. S. Phone is rooted. I have tryied so many tricks to solve this problem. But nothing happens. Even odin wont help me with rescue firmware... It stucks and also writes about frp lock. When I start the update it stops at system.img.ext4 and in phone download screen appears "custom binary(boot) blocked by frp lock...
Please help. If someone will help me I will give 50$$$!!!!!!

mantasakys said:
Hi! My Note 7 n930f stuck after I switched off. It always says "custom binary blocked by frp lock". So it wont boot ir wont let me into twrp and so. P. S. Phone is rooted. I have tryied so many tricks to solve this problem. But nothing happens. Even odin wont help me with rescue firmware... It stucks and also writes about frp lock. When I start the update it stops at system.img.ext4 and in phone download screen appears "custom binary(boot) blocked by frp lock...
Please help. If someone will help me I will give 50$$$!!!!!!
Click to expand...
Click to collapse
Seems you forgot to set the OEM unlock switch to 'on' or tampered with in any way.
The only way to get your phone back working is to flash an original stock rom.
Which one is working depends on the original frimware level you had before (exact firmware code needed), since you can't downgrade to an earlier baseband level.
Please post this information and let me look if I have a matching fimware for you.
If so, I can upload to your cloud storage like google drive etc.

Hello, I also have similar problem with note 7 sn930fd running note fe rom. I switched oem unlock off to test magisk and forgot to turn back on. Frp issue on restarting the phone. Now it can only boot to download mode. I attempted Odin with official firmware but failed. I got Sw Rev check fail device 3 binary 1. I am assuming that's because it's not the correct firmware? If so what's the correct firmware to download?
thanks
John
Thank you all. Problem resolved

mantasakys said:
Hi! My Note 7 n930f stuck after I switched off. It always says "custom binary blocked by frp lock". So it wont boot ir wont let me into twrp and so. P. S. Phone is rooted. I have tryied so many tricks to solve this problem. But nothing happens. Even odin wont help me with rescue firmware... It stucks and also writes about frp lock. When I start the update it stops at system.img.ext4 and in phone download screen appears "custom binary(boot) blocked by frp lock...
Please help. If someone will help me I will give 50$$$!!!!!!
Click to expand...
Click to collapse
you find the correct firmware here in this page or look for the same firmware posted elswhere. when you flashed send me 50$.
https://forum.xda-developers.com/note-7/help/n930fxxu3bpl2-t3520988/page2

Related

[Q] Firmware upgrade encountered an issue.Select recovery mode in Kies & try againn

[Q] Firmware upgrade encountered an issue.Select recovery mode in Kies & try againn
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Just for giggles, plug your phone into Odin on that screen. If it recognizes it (blue com box lights up), use that screen as download mode. But, i would download your file again, making sure to get the one for the I747M.
Really?
mrhaley30705 said:
Just for giggles, plug your phone into Odin on that screen. If it recognizes it (blue com box lights up), use that screen as download mode. But, i would download your file again, making sure to get the one for the I747M.
Click to expand...
Click to collapse
Would that actually work cuz im stuck in the same situation... and i just got my tab today after repairs. and i dont wanna screw it up again cuz of parents so im just gonna give it a try to see if it works
Help
Has no one solved this issue yet? I just encountered it also I'm on t-mobile.
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
If you can get your device back into download mode, you could relay the stock firmware from www.stockbroker.net. Select the file you downloaded under pda in Odin and flash it. Hope this helps. You can try to root again from there.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Upgraded to 4.1.1 even after soft-brick !
Soft-brick aka " firmware upgrade encountered an issue " - screen in galaxy s3 sgh-i747 is a warning bell that somehow device might get interrupted while updating firmware , now i tried twice with old odin , and twice with new odin , what you got to do is just keep on trying and make sure that your galaxy s3 SGH-i747 drives are installed then after restart your pc , tried kies already , just waste of times , wasted 2 hours yet that official software didnt help me to upgrade or recover my device !
Finally i executed Odin 3.7 ( run as admin ) then --> ticked box : auto reboot , F. reset time ! upload that Firmware upgrade of Jelly bean in PDA section and wait till it gets loaded then press start ! ( i had to do this 3 times n then it worked , so dont lose the hope , keep trying over and over again ) and it will take 6~7 minutes as new OS is big around 1 GB ! so dont unplug device and ur done , then after completion , cellphone will restart with new settings and new OS !
---------- Post added at 03:14 AM ---------- Previous post was at 03:07 AM ----------
Dezzy87 said:
Has no one solved this issue yet? I just encountered it also I'm on t-mobile.
Click to expand...
Click to collapse
Read my general opinion in this thread , and find compatible ROM for T-mobile and it will work with new Odin 3.7 !
Has no one solved this issue yet?
I can't do anythiing with mi S3... not responding yet
macuruso said:
Has no one solved this issue yet?
I can't do anythiing with mi S3... not responding yet
Click to expand...
Click to collapse
can you get into download mode
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
i have the same error (firmware upgrade encountered an issue. please select recovery mode in kies and try again) on my Samsung Galaxy Tab 2 10.1 but i dont have this
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
I cant get my tablet in download or recovery, Kies doesnt recognise my tablet either? what do i do? please if someone has solved it plz plz plz tell me
Also when i plug my tablet into my PC i get "USB device not recognised" how do i fix that too?
akshar102 said:
Soft-brick aka " firmware upgrade encountered an issue " - screen in galaxy s3 sgh-i747 is a warning bell that somehow device might get interrupted while updating firmware , now i tried twice with old odin , and twice with new odin , what you got to do is just keep on trying and make sure that your galaxy s3 SGH-i747 drives are installed then after restart your pc , tried kies already , just waste of times , wasted 2 hours yet that official software didnt help me to upgrade or recover my device !
Finally i executed Odin 3.7 ( run as admin ) then --> ticked box : auto reboot , F. reset time ! upload that Firmware upgrade of Jelly bean in PDA section and wait till it gets loaded then press start ! ( i had to do this 3 times n then it worked , so dont lose the hope , keep trying over and over again ) and it will take 6~7 minutes as new OS is big around 1 GB ! so dont unplug device and ur done , then after completion , cellphone will restart with new settings and new OS !
---------- Post added at 03:14 AM ---------- Previous post was at 03:07 AM ----------
Read my general opinion in this thread , and find compatible ROM for T-mobile and it will work with new Odin 3.7 !
Click to expand...
Click to collapse
Im going to try this again and again I have the same screen on my verizon galaxy note 2 that I WAS trying to unlock for t mo and just went about it the wrong way. My screen says the same ol Firmware upgrade encountered an issue...... I CAN get into Odin to upload a firmware and IT DOES recognize the phone BUT no matter what firmware I try nothing works its stuck in the same mode. I think I have looked at all available videos and threads on this but nothing :crying: should I keep tryong to flash the rom or just give up? Any more help is appreciated thanks!
djcnote562 said:
Im going to try this again and again I have the same screen on my verizon galaxy note 2 that I WAS trying to unlock for t mo and just went about it the wrong way. My screen says the same ol Firmware upgrade encountered an issue...... I CAN get into Odin to upload a firmware and IT DOES recognize the phone BUT no matter what firmware I try nothing works its stuck in the same mode. I think I have looked at all available videos and threads on this but nothing :crying: should I keep tryong to flash the rom or just give up? Any more help is appreciated thanks!
Click to expand...
Click to collapse
This is for the S3, flashing it's firmware on the Note 2 won't work. I highly suggest you go on the Note 2 section.
I found a fix for this problem
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
1)Download this file www.mediafire.com/?bbfsnnub9gzg5wj
2)Go into download mode
3) connect your device to the computer and run ODIN as an administrator
4)Open the file and click start
5) Your phone should reboot
6) if your phone gets in a boot loop you need to download the latest firmware for your device
I hope this could help you, if the instructuions were unclear, send me a message and i will do my best to help you!
Re: [Q] Firmware upgrade encountered an issue.Select recovery mode in Kies & try agai
1)Download this file www.mediafire.com/?bbfsnnub9gzg5wj
2)Go into download mode
3) connect your device to the computer and run ODIN as an administrator
4)Open the file and click start
5) Your phone should reboot
6) if your phone gets in a boot loop you need to download the latest firmware for your device
I hope this could help you, if the instructuions were unclear, send me a message and i will do my best to help you!
Sent from my GT-P5113 using xda app-developers app
Download cwm-touch-i717-120414.tar.md5
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
ManUYSC said:
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
Click to expand...
Click to collapse
How any pages did you go back to find this thread? It literally has sat, answered and untouched for close to 2 months
it worked
man it worked used the error screen as download mode and it reflashed with even all my settings awesome .... thanks
use one of the $8 dongles. supersimple
cheers
ManUYSC said:
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
Click to expand...
Click to collapse
You are my hero! Ignore that little girl beneath your post, I'm glad you took the time to post the solution.
Ainol novo 8 discover flashing firmware error
Sir i have ainol novo 8 discover it has a problem that when i install firmware files on my discover with firmware tool there have a problem is data.img file cant install on my tblet software shows WRITE DATA PARTITION FAILED..and u can see screen shot also plzzzz help me what i do.plzz thanks in advance.

Bootloop help

Hi, my sister's GT-I9195 got bricked suddenly some days after she OTA upgraded to 4.4.2. As I live in another city, she left the phone thinking it was dead for months.
I noticed it could enter download mode and left it charging then tried every alternative method I found through Odin by flashing different firmwares, and the unbricking guide for BL v1. All of them ended in bootloop, even if I flash a recovery tool like Philz Touch it does not enter the recovery I've just installed, it shows a blue message on top of screen and bootloop again.
I know it is bootloader ap swrev: 2, then I can only flash firmwares with v2 bootloader, but the one recommended is UBUBNE2, and this one has not get me out of bootloop to. The phone is still Knox 0x0 but I don't know if it may help in the question.
If anyone has a light over this I would be very grateful cause I'm stuck now.
vitor6496 said:
Hi, my sister's GT-I9195 got bricked suddenly some days after she OTA upgraded to 4.4.2. As I live in another city, she left the phone thinking it was dead for months.
I noticed it could enter download mode and left it charging then tried every alternative method I found through Odin by flashing different firmwares, and the unbricking guide for BL v1. All of them ended in bootloop, even if I flash a recovery tool like Philz Touch it does not enter the recovery I've just installed, it shows a blue message on top of screen and bootloop again.
I know it is bootloader ap swrev: 2, then I can only flash firmwares with v2 bootloader, but the one recommended is UBUBNE2, and this one has not get me out of bootloop to. The phone is still Knox 0x0 but I don't know if it may help in the question.
If anyone has a light over this I would be very grateful cause I'm stuck now.
Click to expand...
Click to collapse
Hi all, I think have the some problem.
Tried flash several Roms and recovery images (CWN) but the phone stills bootloop.
With ODIN flash dive succes or pass message but same issue after reboot .
When enter in downloading mode i get some information..... "WRITE POTECTION:ENABLED" ,how can i disable this protection ?
AV and firewall disabled.
Any ideas ?

Realme 3 RMX1821 Bricked

Hello all,
Hope that everyone will be safe and healthy.
I have bricked my Realme 3 RMX1821 and would be grateful for any help to get it working back again.
Event Summary: I unlocked its bootloader with the help of Realme Tool and then installed TWRP recovery and Magisk. All worked fine. Later on due to some reasons I uninstalled Magisk and then attempted to Lock the bootloader with TWRP installed.
Immediately after the bootloader was locked my phone was rebooted and a warning screen appeared saying “Charging Overtime”. Now I tried to turn off the phone and restarted it with Volume Down button pressed. Still the same screen with an additional message in the corner saying “Recovery Mode”. Under both the cases no other button works and I have to power it off.
Support centers are all closed due to current virus issues and I need this phone really badly.
Will be grateful if someone may help me out.
Thanks!
You should never lock your bootloader with custom recovery installed
Try unlock bootloader using fastboot
about realme 3 charging overtime error
kprsnt said:
You should never lock your bootloader with custom recovery installed
Try unlock bootloader using fastboot
Click to expand...
Click to collapse
unale to boot into fastboot mode please give me some suggestion please
i have the same problem i cant go to fastboot mode and recovery mode the best to fix this to flash the stock firmware but the tools need a ID and Pass to used it.
i have realme 3 rmx1821 i tried the bypass the pass but it wont work theirs a error
realme 3 bricked
Ibno Hamid VI said:
i have the same problem i cant go to fastboot mode and recovery mode the best to fix this to flash the stock firmware but the tools need a ID and Pass to used it.
i have realme 3 rmx1821 i tried the bypass the pass but it wont work theirs a error
Click to expand...
Click to collapse
bro tell the name of the tool
my be msmdownload tool
mfahad said:
Hello all,
Hope that everyone will be safe and healthy.
I have bricked my Realme 3 RMX1821 and would be grateful for any help to get it working back again.
Event Summary: I unlocked its bootloader with the help of Realme Tool and then installed TWRP recovery and Magisk. All worked fine. Later on due to some reasons I uninstalled Magisk and then attempted to Lock the bootloader with TWRP installed.
Immediately after the bootloader was locked my phone was rebooted and a warning screen appeared saying “Charging Overtime”. Now I tried to turn off the phone and restarted it with Volume Down button pressed. Still the same screen with an additional message in the corner saying “Recovery Mode”. Under both the cases no other button works and I have to power it off.
Support centers are all closed due to current virus issues and I need this phone really badly.
Will be grateful if someone may help me out.
Thanks!
Click to expand...
Click to collapse
Go to the Realme services center

Samsung Galaxy Watch(SM-R500) reactivation lock oases

So I have this R500 watch which is locked On reactivation screen. And with the help of previous post I was able to flash combination and debug. The issue is I have now run sdb commands successfully but afer its reboots to download mode it still shows reactivation lock :ON
Any help please
Is your watch stuck to odin mode too? I got mine bricked. Maybe you could help me to flash original firmware. Thanks

Question Black screen after firmware update.

Good day. After an incorrect firmware update through mtkclient, the Rui 3 screen turned black and does not display anything. Replacement of the screen did not help. We tried to flash official firmware from the website, but it didn't work. If possible, please share lk2.bin so we can try to flash it. We have run out of ideas on how to revive the phone.Successfully entered and flashed in brom mode.
Sorry to inform you but based on my knowledge it is impossible to flash this phone!How do you entered brom mode ? Because i tried and it didn't worked for me!

Categories

Resources