Hi all,
I am new to the forum and I come with a question
I recently purchased a Kenwood DNR935WBT for the price of 3 latte's (approx)
It came with the WiFi HDMI adapter and all that and almost brand new from the looks of it.
However, the dreaded 'system rebuilding' error is present. Hence, the sale.
I have seen your thread on the DNN992 rooting. I saw the comments saying the system rebuilding error can be removed but did not see substantial steps.
I wonder whether any of you can help me with the steps so I can try this at home.
Thanks!
I have had a Pumpkin PX5 (newest version) in my truck for about 2 months now. Every two weeks the factory bluetooth app will not play sound. I have emailed pumpkin support but they can barely speak english. They gave me a new ROM to flash onto the unit which did nothing so I had to factory reset the unit and lost all my installed apps, etc to get it to work again. It now happens every 2 weeks and lately even a hard factory reset doesn't fix the issue. I was thinking maybe I'll root it but I can't be bothered. It does this issue when any phone is used, not just mine. It shows the song played on the phone but no sound comes out regardless of the volume settings
I am at my wits end with this thing and am tempted to spend the dough on a kenwood or pioneer unit because this is getting ridiculous. I have asked pumpkin if I can return it because it is practically in brand new condition. Their communication is horrible due to the language barrier and like I said nothing is working at this point. I just want to listen to some darn music!
If someone wants to buy a brand new pumpkin and pay for shipping for a great price shoot me a PM
thanks for any and all help
*Unable to post on software development due to limited posts*
Hi all, hope your well
My Eonon Ga6153f has been slow since I first got it.
Eonon have sent me numerous update files throughout my warranty period and there after but still no speed improvement
I decided to install a custom 'Malaysk' 5.1 firmware 1024x800 RK3188, this was whilst the car engine was off, it failed multiple times and I found out that the system was looking for a 'dupdate.img' not 'update.img'
So I renamed the file and it was going well however my car battery died during the installation and the head unit just cut off. I believe the head unit is now hard bricked.
All i get now is a black screen. I've tried booting into recovery as advised by eonon by holding reset and power etc.. But no luck. The dvd ejects and the head unit lights do come on when letting go of reset for 1 second but that's it.
I've tried using sd tool to load the stock eonon firmware on it but no luck. I've also had the img file on USB aswell but still nothing when switching the unit on
I've also tried rockchip batch tool by connecting head unit to the computer but rockchip cannot find the device? (Windows 10)
Am I doing something wrong? Any solutions?
I've spoke to eonon and they can't do nothing as I'm out of my warranty period and they are only willing to offer 10% off a brand new unit which still would cost me £280 which I reallly do not want to spending again
I've been driving without a stereo for 2 months now! Boring journeys everyday. Hope someone can help!
(P.s i am based in London, UK if anyone would like to come help me out)
Anyone???
Hello everyone. I’ve got a hizpo Head unit with an inverted screen that I can’t figure out. Funny thing yesterday I plugged the radio in and the screen was good and 30 minutes later I was watching it when it did it but it went inverted again. Does anyone have an answer to this on these forums? Can I update to the latest version of software and firmware and it fix the problem? Where would I find the upgrade? Can windows ce be installed on this Head unit? It’s running Android 7.1.2 right now. The cpu is arm cortex [email protected] 1.6 ghz (X4) the mcu from what I could make of it being inverted is MTCD_XRC_V2.58_1 jul 31 2017 17:35:55. The model on the Head unit itself is AD717009. Any help would be greatly appreciated this thing is driving me nuts.
I think you are on right track when you say mcu. I would contact the seller first and explain issue and they might send you mcu. I had similar issues but not the same with mine.
https://forum.xda-developers.com/an...ad-units/how-figure-density-settings-t3964977
I think you are on right track when you say mcu. I would contact the seller first and explain issue and they might send you mcu. I had similar issues but not the same with mine.
https://forum.xda-developers.com/an...ad-units/how-figure-density-settings-t3964977
Hello there. I have upgraded the board from my Eonon KBT navigation from 4c/2gb/7.1.2 to 8c/4gb/android 10.
How can i root it, or if its an alternative software from malasyk/hal9k that can i use?
I kept searching, but i only found alternatives for Android 9.
Which board did you end up with for your upgrade? I also have an old Eonon unit (GA8166A for BMW X5 E53). I believe it is a PX3 board - MTCD KBT 2.61.
Hey. I bought this one : https://www.aliexpress.com/item/32814725689.html?spm=a2g0s.9042311.0.0.27424c4dUrIXPN
Ordered via DHL (extra pay), but asked the seller to put a price tag of 10$, because DHL wouldn't take any commissions for under 10$ final price ).
It was plug and play with 2 day transport from China to Romania.
Nice - thanks for the super quick reply. I understand I need to flash the MTCD to MTCE with the correct KBT firmware before installing the new px5 board.
Did you manage to find an up to date version of the MTCE KBT firmware? Once again thank you - I really appreciate your input.
Nope, i didn't installed other MCU.
I did try a HA 3.41 version, but screwed my navi completely, even if i tried to make everything again in factory settings.
I did leave my default MCU (that came with the navi, KBT 2.61), and worked flawlessly.
I did saw your post now, about the Bluetooth problem. I have EXACTLY the same problem since i got it, and only in the cold weather. So, i guess its something about Eonon afterall.
I actually got tired of the bluetooth connection and i didn't conected it anymore to my phone.
Thanks - and no BT/WiFi issues? The reason I want to change the board is intermittent BT/WiFi.
Refresh this thread, i edited my last post )
So, the board will not save the BT issue.
Actually, i regret buying this px5 board because i think i would have been better with another navi.
Don't get me wrong, its a big difference from PX3 to PX5, but it would have been a bigger one to PX6 )
I saw some variants from XTRONS and JOYING, decent price, but with PX5 also. I want to get a PX6 if possible, to make it even faster.
Interesting. In my case it seems to be temperature related. Below 10 degrees or so the BT will not work. Eonon suggested to enter factory settings and set the BT to WQ_BC8. Did not work.
But when the unit is warm after driving for 10 min or so it seems to work. That is if I set BT to WQ_BC8 and then restarting the unit. After parking the car overnight the problem is back. All the paired devices are gone and the unit does not show up when searching for BT devices.
Maybe a different BT module (i.e USB) would solve the problem. WiFi works all the time.
Yep, wifi works without fuss.
BT, exactly your problem. Devices gone, no pin, no name, unsearchable.
Probably a different module to integrate on the motherboard, but i don't think its that easy to switch, i have no ideea. I will search!