Hello everyone. I’ve got a hizpo Head unit with an inverted screen that I can’t figure out. Funny thing yesterday I plugged the radio in and the screen was good and 30 minutes later I was watching it when it did it but it went inverted again. Does anyone have an answer to this on these forums? Can I update to the latest version of software and firmware and it fix the problem? Where would I find the upgrade? Can windows ce be installed on this Head unit? It’s running Android 7.1.2 right now. The cpu is arm cortex [email protected] 1.6 ghz (X4) the mcu from what I could make of it being inverted is MTCD_XRC_V2.58_1 jul 31 2017 17:35:55. The model on the Head unit itself is AD717009. Any help would be greatly appreciated this thing is driving me nuts.
I think you are on right track when you say mcu. I would contact the seller first and explain issue and they might send you mcu. I had similar issues but not the same with mine.
https://forum.xda-developers.com/an...ad-units/how-figure-density-settings-t3964977
I think you are on right track when you say mcu. I would contact the seller first and explain issue and they might send you mcu. I had similar issues but not the same with mine.
https://forum.xda-developers.com/an...ad-units/how-figure-density-settings-t3964977
Related
My Autopumpkin KLD/RK3066 unit recently started giving me the "com.google.process.gapp has stopped" message, so I thought it was time to step it up and get one of the latest ROM's here. Anyways, I started at:
MCU
MTCB0KLD-V2.30
Jan 22, 2015 13:50
Model
S07
Kernel 3.0.361
Build rk3066-eng4.4.4.23012015.1544
...and I went to KLD 2.78/latest update.img date 12/31/2015 called update_4_4_4_FUSE_800X480_RK3066_33_MAL_30_12_2015
What an amazing difference! Too many great things to name so I can never go back, however, my rear pre-amp channel has disappeared, and radio reception no longer works, when both these features were working before the flash upgrade. It's possible that the solder broke on the antenna lead as mentioned in other threads, I'll check that, but have others encountered these issues simultaneously? Did I overwrite with the wrong MCU.img? I've tried every Radio Tuner in the pulldown under Factory Settings...
One other minor issue, I can't change the rotating startup logo to the Porsche logo, it appears to accept my change, but then never does it.
Thanks for any help in advance!
You should have kept the original MCU, updating only the ROM...
Loading a newer MCU must be the last measure only if there are some relevant problems that can't be solved by a new ROM.
This recommendation is too often ignored...
themissionimpossible said:
You should have kept the original MCU, updating only the ROM...
Loading a newer MCU must be the last measure only if there are some relevant problems that can't be solved by a new ROM.
This recommendation is too often ignored...
Click to expand...
Click to collapse
So, are you saying I could downgrade the MCU.img, and my rear channel and radio may come back? None of the apps in the Update.img depend on later MCU firmware versions?
graylens said:
None of the apps in the Update.img depend on later MCU firmware versions?
Click to expand...
Click to collapse
Absolutely not.
Restoring the original MCU might solve the problems, but unfortunately not always completely succeeds...
themissionimpossible said:
Absolutely not.
Restoring the original MCU might solve the problems, but unfortunately not always completely succeeds...
Click to expand...
Click to collapse
Just did the downgrade, no effect. Also, it's not just the pre-amp rear RCA outputs, the rear speaker outputs from the head unit itself are dead. Has anyone else had the rear channel go out on one of these decks from a firmware upgrade?
I'm fortunate in that I can have the front channel go to my amp and drive 4 of the 6 speakers, the dash speakers are driven by the front channel of the radio. Of course, the fader no longer does anything...
graylens said:
Just did the downgrade, no effect. Also, it's not just the pre-amp rear RCA outputs, the rear speaker outputs from the head unit itself are dead. Has anyone else had the rear channel go out on one of these decks from a firmware upgrade?
I'm fortunate in that I can have the front channel go to my amp and drive 4 of the 6 speakers, the dash speakers are driven by the front channel of the radio. Of course, the fader no longer does anything...
Click to expand...
Click to collapse
I'd revert back to the OEM android image and see if that fixes your problem also. Here's one for KLD, dual core, 800x480.
KLD_rk3066_p_2015-11-27.rar
*Unable to post on software development due to limited posts*
Hi all, hope your well
My Eonon Ga6153f has been slow since I first got it.
Eonon have sent me numerous update files throughout my warranty period and there after but still no speed improvement
I decided to install a custom 'Malaysk' 5.1 firmware 1024x800 RK3188, this was whilst the car engine was off, it failed multiple times and I found out that the system was looking for a 'dupdate.img' not 'update.img'
So I renamed the file and it was going well however my car battery died during the installation and the head unit just cut off. I believe the head unit is now hard bricked.
All i get now is a black screen. I've tried booting into recovery as advised by eonon by holding reset and power etc.. But no luck. The dvd ejects and the head unit lights do come on when letting go of reset for 1 second but that's it.
I've tried using sd tool to load the stock eonon firmware on it but no luck. I've also had the img file on USB aswell but still nothing when switching the unit on
I've also tried rockchip batch tool by connecting head unit to the computer but rockchip cannot find the device? (Windows 10)
Am I doing something wrong? Any solutions?
I've spoke to eonon and they can't do nothing as I'm out of my warranty period and they are only willing to offer 10% off a brand new unit which still would cost me £280 which I reallly do not want to spending again
I've been driving without a stereo for 2 months now! Boring journeys everyday. Hope someone can help!
(P.s i am based in London, UK if anyone would like to come help me out)
Anyone???
My Win CE head unit recently stopped recognizing all discs, USB devices, and SD cards. The radio, Bluetooth, and GPS all work perfectly though. I have spent the last few days reading through posts here about resetting or updating the device, however, the solutions I’ve found are all outdated.
If someone could provide a little insight into how I might be able to resolve the issues, I would greatly appreciated the help.
Brand: Possibly Eincar (Not sure though)
APP: T1C6B1_5.16_16303.01_16_T1
OS: C2C9-N1.14-20141216-T1-YHD
MCU: T1C6B1_151230_7786DZ
Also, the date and time now randomly resets to Midnight, January 6th, 2001. I am not sure if this related.
Hello there. I have upgraded the board from my Eonon KBT navigation from 4c/2gb/7.1.2 to 8c/4gb/android 10.
How can i root it, or if its an alternative software from malasyk/hal9k that can i use?
I kept searching, but i only found alternatives for Android 9.
Which board did you end up with for your upgrade? I also have an old Eonon unit (GA8166A for BMW X5 E53). I believe it is a PX3 board - MTCD KBT 2.61.
Hey. I bought this one : https://www.aliexpress.com/item/32814725689.html?spm=a2g0s.9042311.0.0.27424c4dUrIXPN
Ordered via DHL (extra pay), but asked the seller to put a price tag of 10$, because DHL wouldn't take any commissions for under 10$ final price ).
It was plug and play with 2 day transport from China to Romania.
Nice - thanks for the super quick reply. I understand I need to flash the MTCD to MTCE with the correct KBT firmware before installing the new px5 board.
Did you manage to find an up to date version of the MTCE KBT firmware? Once again thank you - I really appreciate your input.
Nope, i didn't installed other MCU.
I did try a HA 3.41 version, but screwed my navi completely, even if i tried to make everything again in factory settings.
I did leave my default MCU (that came with the navi, KBT 2.61), and worked flawlessly.
I did saw your post now, about the Bluetooth problem. I have EXACTLY the same problem since i got it, and only in the cold weather. So, i guess its something about Eonon afterall.
I actually got tired of the bluetooth connection and i didn't conected it anymore to my phone.
Thanks - and no BT/WiFi issues? The reason I want to change the board is intermittent BT/WiFi.
Refresh this thread, i edited my last post )
So, the board will not save the BT issue.
Actually, i regret buying this px5 board because i think i would have been better with another navi.
Don't get me wrong, its a big difference from PX3 to PX5, but it would have been a bigger one to PX6 )
I saw some variants from XTRONS and JOYING, decent price, but with PX5 also. I want to get a PX6 if possible, to make it even faster.
Interesting. In my case it seems to be temperature related. Below 10 degrees or so the BT will not work. Eonon suggested to enter factory settings and set the BT to WQ_BC8. Did not work.
But when the unit is warm after driving for 10 min or so it seems to work. That is if I set BT to WQ_BC8 and then restarting the unit. After parking the car overnight the problem is back. All the paired devices are gone and the unit does not show up when searching for BT devices.
Maybe a different BT module (i.e USB) would solve the problem. WiFi works all the time.
Yep, wifi works without fuss.
BT, exactly your problem. Devices gone, no pin, no name, unsearchable.
Probably a different module to integrate on the motherboard, but i don't think its that easy to switch, i have no ideea. I will search!
Hello Everyone,
I had a bad idea to try and upgrade my zlink app in my wife's car with a new version. Of course without backing up the old version . I've since tries installing about 20 versions I found online to no avail, and the seller of the unit I bought (CarNavi on aliexpress is not willing to help). Anyway, I've attached pics of the system info and actually had an old screen shot of the zlink app I am looking to replace, it is a PX6 unit. If anyone has the same head unit and has or can get their apk, I'd totally appreciate it.
Thanks!