There were replacement screen protectors for the main screen of the Z Fold2. I noticed Whitestone and other companies are advertising screen protectors for the Fold3. I assume these would be applied on the main screen directly as the Fold3 does not have a Samsung installed protector?
Also any recommendations for the front screen?
I believe the internal has a preinstalled screen protector. Same as the fold 2.
I was unable to get information if the exterior one has a screen protector or not.
I would think so since it seems normal for samsung now.
xile6 said:
I believe the internal has a preinstalled screen protector. Same as the fold 2.
I was unable to get information if the exterior one has a screen protector or not.
I would think so since it seems normal for samsung now.
Click to expand...
Click to collapse
Idk I tried out the phone in store, and this iteration of the fold felt more like glass and less like plastic and I didn't see a noticeable screen protector like the Fold 2.
Thinking about getting Ferilinso Designed for Samsung Galaxy Z Fold 3 5G Flexible TPU Screen Protector. Just a precaution, rather safe than sorry.
Fatmonk8 said:
Idk I tried out the phone in store, and this iteration of the fold felt more like glass and less like plastic and I didn't see a noticeable screen protector like the Fold 2.
Click to expand...
Click to collapse
They did say thicker protector and its tpu i believe.
I had screen protectors that feel "like glass" vs cheap plastic before.
Either way all a step in the right direction
xile6 said:
They did say thicker protector and its tpu i believe.
I had screen protectors that feel "like glass" vs cheap plastic before.
Either way all a step in the right direction
Click to expand...
Click to collapse
Well whatever they did, I was very impressed with what I felt today and it made my decision to make the jump and pre-order
They changed the screen protector to PET, this is one of the best and most overlooked features.
Semantics said:
They changed the screen protector to PET, this is one of the best and most overlooked features.
Click to expand...
Click to collapse
Thanx for the correction. Cant believe i forgot it was pet with all the 3d printing i do lol..
Fatmonk8 said:
Well whatever they did, I was very impressed with what I felt today and it made my decision to make the jump and pre-order
Click to expand...
Click to collapse
Where did you find it in store? I haven't actually held one yet but my order is in. Thought about swinging by a Best Buy soon.
94b20gsr said:
Where did you find it in store? I haven't actually held one yet but my order is in. Thought about swinging by a Best Buy soon.
Click to expand...
Click to collapse
Best buy had one but it was off and I couldn't power it on, Verizon had one on and working, so I got to actually play with it. I'm telling you, the improvements they did to the folding screen are amazing imo. That's always been my thing that keep me from getting the fold, but as soon as I felt how much better it was on the 3, I went ahead and pre-ordered.
Fatmonk8 said:
Idk I tried out the phone in store, and this iteration of the fold felt more like glass and less like plastic and I didn't see a noticeable screen protector like the Fold 2.
Click to expand...
Click to collapse
MrMobiles review advised they have used a new type of screen protector this year that ends underneath the bezels of the screen, so its more 'built in' than ever. It's also not made from TPU, so you wont get those nasty finger smudge marks as much.
vinokirk said:
MrMobiles review advised they have used a new type of screen protector this year that ends underneath the bezels of the screen, so its more 'built in' than ever. It's also not made from TPU, so you wont get those nasty finger smudge marks as much.
Click to expand...
Click to collapse
Maybe they were tired of repair screens of people who ripped the protector off and somehow damaged the screen, lol. I changed screen protectors on my z Fold 2 weekly trying to find the right one and the screen was always perfect.
Also the PET screen protectors definitely don't smudge as much and they're easier to wipe off. I hope they're scratch resistant if they're making it harder to remove. I'm ocd about hairline scratches in my screen protectors. Drives me insane.
Hi, I have removed the screen protector on my fold2 and I'm using it for months without any protectors - I could not stand the plastic feelings - the glass touch is perfect on the fold2 and it does not scratch that much. I'm curious - as the fold 3 has now non removable PET layer - how it would be compared to the fold2 without any protectod vs the fold 3 ?
Watching some videos from Korea, and it seems Whitestone Dome has a UTG screen protector for the inner folding screen.
Sorry, video is in Korean, but no doubt you can work it out from watching.
Whitestone Dome Silk.
Dolgogi said:
Watching some videos from Korea, and it seems Whitestone Dome has a UTG screen protector for the inner folding screen.
Sorry, video is in Korean, but no doubt you can work it out from watching.
Whitestone Dome Silk.
Click to expand...
Click to collapse
I think that thing is like $80.
My whitestone silk is arriving tomorrow, still waiting on my phone to ship out next week
I hope that this PET protector wil be still possible to remove to have nice glass experience.
On my fold 3 I can feel a edge from screen protector so it seems to be removable, it isn't embedded under the plastic frame.
You already have fold 3? Can you please tell me how is the feeling / touch on the built in PET protector? Is it glass like touch/look?
festr said:
You already have fold 3? Can you please tell me how is the feeling / touch on the built in PET protector? Is it glass like touch/look?
Click to expand...
Click to collapse
Yes that is correct I got mine on 18th August after ordering it on 11th August. I can say surface is smooth and feels good. Hardly any visible finger prints when device is on. Like it is with those plastic ones that makes it visible.
Related
Hi guys so the screen protector hunt starts again ive been looking on amazon uk and some of them seem to be a full adhesive fit does anyone know if the xz2 has flat glass near the main display or is it 2.5D like most models
hear is one ive been looking at https://www.amazon.co.uk/Protector-...6&sr=8-7&keywords=xperia+xz2+screen+protector
On the same hunt, the glass is definitely 2.5D. I wouldn't expect any full adhesive glass protectors to work without massive halo's.
Goronok said:
On the same hunt, the glass is definitely 2.5D. I wouldn't expect any full adhesive glass protectors to work without massive halo's.
Click to expand...
Click to collapse
nightmare isnt it ive had loads of phones lately and everyone has been rubbish id be happy with a good film protector along as its crystal clear but even them seem to have a snowy effect
the Girlfriends iphone 8 plus is the last decent protector ive seen
I’ve ordered
Beyeah??
Will give you an update once I get the phone! Got to wait until 5th April! ?
well just received my xz2 and tired these https://www.amazon.co.uk/Newzerol-D...7&sr=1-8&keywords=xperia+xz2+screen+protector
there okish nice and clear but dont fit too well and at the top and bottom the dont seem to be sticking all too well
anyone had any luck with any more?
thanks
I buy iVoler tempered glass from amazon ita, are warranty life...when will arrive i'll check the description
Edit: iVoler tempered glass for xz2 are very bad, halo in all 4 sides
Zazzinho said:
I buy iVoler tempered glass from amazon ita, are warranty life...when will arrive i'll check the description
Edit: iVoler tempered glass for xz2 are very bad, halo in all 4 sides
Click to expand...
Click to collapse
I bought these
https://www.amazon.co.uk/dp/B07BHLGSBT/ref=cm_sw_r_sms_apa_QVp0Ab7M39G0D
Fitted nice and stuck quite well and no halo till you touch the display then hallo everywhere but they gradually disappear once left alone
God I hate the whole screen protector problems the gf has a iPhone 8 plus bought one went on full adhesive not problems looks crystal clear :crying:
brockyneo said:
I bought these
https://www.amazon.co.uk/dp/B07BHLGSBT/ref=cm_sw_r_sms_apa_QVp0Ab7M39G0D
Fitted nice and stuck quite well and no halo till you touch the display then hallo everywhere but they gradually disappear once left alone
God I hate the whole screen protector problems the gf has a iPhone 8 plus bought one went on full adhesive not problems looks crystal clear :crying:
Click to expand...
Click to collapse
1 hour ago i've seen the brotect airglass, how are this screen protector?
Edit: finally today it's arrived brotect airglass, first time i've buyed and it's arrived a back screen protector for s9+ in xz2 package (???), contact the support and they send me a new for free and it's arrived today...no halo, great brightness and very good oleophobic treatment
i think they all seems to be lying on us... they advertise it as a 3D or full cover edge to edge but when you get your hands on it you realize it only protects the LCD, like flat protector...
well, i like this by IMAK... it's a 3D and full edge to edge film rather than tempered glass... what i don't like about it is not glossy, but rather anti-glare which i hate.
check the link below if anyone is interested in buying it
https://www.ebay.com/itm/For-Sony-X...var=552691546263&_trksid=p2055119.m1438.l2649
I bought this one, fits edge to edge very well.
https://www.amazon.co.uk/dp/B07B3XGHDV/ref=cm_sw_r_em_apa_i_ZWe8AbT6KPEVK
brockyneo said:
Hi guys so the screen protector hunt starts again ive been looking on amazon uk and some of them seem to be a full adhesive fit does anyone know if the xz2 has flat glass near the main display or is it 2.5D like most models
hear is one ive been looking at https://www.amazon.co.uk/Protector-...6&sr=8-7&keywords=xperia+xz2+screen+protector
Click to expand...
Click to collapse
this should look amazing, also it does protects the sides....
take a look
https://www.ebay.com/itm/Xperia-XZ2...-Full-Coverage-3Pack-Clear-Flim-/302707711634
here is the perfect case that match it
https://www.ebay.com/itm/Sony-Xperi...&itm=601568981187&_trksid=p5411.c100167.m2940
Does plastic screen protector protects your phone from falls and prevents shattering like the glass ones?
I bought this one but was rubbish bad rainbow affect and started coming off withing a week https://www.amazon.co.uk/dp/B07BHLGSBT/ref=cm_sw_r_sms_apa_i_5VY8Ab1MD67AR
But bought this one https://www.amazon.co.uk/dp/B07BPRBRPT?ref=yo_pop_ma_swf
Works perfect crystal clear and stuck well at the edges been 2 weeks and still looks new and case friendly
AlvinZahran98 said:
Does plastic screen protectors protect your phone from fall and prevents shattering like the glass ones?
Click to expand...
Click to collapse
It prevents glass breaking by 30%.
Or was it 70%?
But it definitely strengths the glass structure.
MartinX3 said:
It prevents glass breaking by 30%.
Or was it 70%?
But it definitely strengths the glass structure.
Click to expand...
Click to collapse
So it is safe to use, as safe as when I use a glass screen protector?
AlvinZahran98 said:
So it is safe to use, as safe as when I use a glass screen protector?
Click to expand...
Click to collapse
I prefer a thick glass screen protector.
It will easily avoid bubbles and is way stronger.
MartinX3 said:
I prefer a thick glass screen protector.
It will easily avoid bubbles and is way stronger.
Click to expand...
Click to collapse
Okay, I always use a glass screen protector too. But, it is a nightmare to find a good glass screen protectors for this phone.
AlvinZahran98 said:
Okay, I always use a glass screen protector too. But, it is a nightmare to find a good glass screen protectors for this phone.
Click to expand...
Click to collapse
I use this one.
I hope you like it.
https://www.wigento.de/smartphone/s...sony-xperia-xz2-schutz-huelle-neu/a-42519990/
I recommend this:
https://www.gadgetshieldz.com/sony-xperia-xz2-screen-protectors-cases-covers-skins.html
Fits perfectly and the smoothness is like glass!
Dont buy this particular type of glass on aliexpress (this is my first bad buy here, others that i ordered for diferent models were worth it) it seems to be problem with this one... i have bad connection in middle of screen 3 cm vertikal (no air bubble, just pad materials on protective glass
https://www.dropbox.com/s/yxu55ssg7vig4xi/Screenshot_20180618-075151.png?dl=0
Has anyone been able to purchase the stock original screen protector that came with the phone? I swear I saw it briefly on Samsung Canada site under accessories page but it's no where to be found now.
Stock protector feels so smooth once you applied a oleophobic coating on it! Not to mention perfect fitment for the phone.
Part number: ETFG975CTEGCA
Does UK, US or other country Samsung sells the stock protector?
Thanks
Sent from my SM-G9750 using Tapatalk
I believe they're 18.99 for Samsung UK (ET-FG975CTEGWW). Samsung US has a supply of them, but they are not accessible via sales.
It is 19.99 here in the States.
I was able to purchase one but not going to get it shipped till 4/5.
Iamnegan said:
Got myself a Gadgetshieldz screen guard for the S10+ when I ordered my skin from them. It’s a self healing one and no scratches till now and most importantly it works fine with the fingerprint scanner. This one looks much better than the actual Pre-installed Samsung screen guard. The screen and guard cost me only around 10$ including shipping.
https://www.gadgetshieldz.com/galaxy-s10-plus-screen-protectors-covers-cases.html
Click to expand...
Click to collapse
To each his own I guess, I hate self healing skins as they have a orange peel finish and it drags/not smooth. The Samsung original one is PET material, not as smooth as glass but much better than self healing protector.
lexi250 said:
To each his own I guess, I hate self healing skins as they have a orange peel finish and it drags/not smooth. The Samsung original one is PET material, not as smooth as glass but much better than self healing protector.
Click to expand...
Click to collapse
I'm using the screen protector for a while, No orange peel effect. And it is not a glass protector, It's a plastic protector as you know it's more smooth than glass.
lexi250 said:
Has anyone been able to purchase the stock original screen protector that came with the phone? I swear I saw it briefly on Samsung Canada site under accessories page but it's no where to be found now.
Stock protector feels so smooth once you applied a oleophobic coating on it! Not to mention perfect fitment for the phone.
Part number: ETFG975CTEGCA
Does UK, US or other country Samsung sells the stock protector?
Thanks
Sent from my SM-G9750 using Tapatalk
Click to expand...
Click to collapse
How do you apply the oleophovic coat? Where can I find it?
You get 2 protectors (3-5 would've been nice) and they are made in Korea just like the phone. The packaging mentions shock protection, dunno how valid that statement is!
Otao Screen Protector for S10 Plus
I always liked the GLASS Otao Screen Protectors so I thought I would try the plastic one when it came out on Amazon. To Be honest, I was very pleasantly surprised.
Easy to install (Dry install and not wet) and there were no bubbles or any issue after I installed. I have been using it with a Case (Ringe Crystal Fusion) for about a week and I am very happy with it. Fingerprints work fine with it.
2 Screen Protectors - under $6.00 - Great Price! LINK
I peeled off my screen protector, the fingerprint is instant now. And the feel is much better.
bassbounce said:
I peeled off my screen protector, the fingerprint is instant now. And the feel is much better.
Click to expand...
Click to collapse
Same here after a month which it was good. But now my screen seems more responsive and vibrant!
galaxys said:
Same here after a month which it was good. But now my screen seems more responsive and vibrant!
Click to expand...
Click to collapse
I'm so tempted to remove the one that was pre installed. But samsung adviced to leave it on...
whitestone Dome Glass
check it out
https://www.amazon.com/gp/product/B07NQ235XX?ref=ppx_pt2_dt_b_prod_image
Ace42 said:
You get 2 protectors (3-5 would've been nice) and they are made in Korea just like the phone. The packaging mentions shock protection, dunno how valid that statement is!
Click to expand...
Click to collapse
Do these have the same cutout for the front camera or is the whole corner cutout?
Saw someone say that the whole corner was cutout.
It is the whole corner cutout.
glock20c said:
whitestone Dome Glass
check it out
https://www.amazon.com/gp/product/B07NQ235XX?ref=ppx_pt2_dt_b_prod_image
Click to expand...
Click to collapse
I've been using these for the last 3 devices. No issues. On my S10+ the top keeps trying to lift. I'm on my 4th one now and about to give up. They install perfect reach time but after a few days you can see it starting to lift near the top bezel. No case touching it. Anyone else having these issues?
itsachirpthing said:
I've been using these for the last 3 devices. No issues. On my S10+ the top keeps trying to lift. I'm on my 4th one now and about to give up. They install perfect reach time but after a few days you can see it starting to lift near the top bezel. No case touching it. Anyone else having these issues?
Click to expand...
Click to collapse
none at all...I've cured it with UV lamp a couple of times though
itsachirpthing said:
I've been using these for the last 3 devices. No issues. On my S10+ the top keeps trying to lift. I'm on my 4th one now and about to give up. They install perfect reach time but after a few days you can see it starting to lift near the top bezel. No case touching it. Anyone else having these issues?
Click to expand...
Click to collapse
I have the same issue without a case as well. If you look closely you'll see that there is still a thin strip of adhesive keeping it dust tight but still lifting around the edges.
Are there any dry application screen protectors that cover the entire screen like Samsung protector? Those case friendly protectors look weird since they leave margins on the display
itsachirpthing said:
I've been using these for the last 3 devices. No issues. On my S10+ the top keeps trying to lift. I'm on my 4th one now and about to give up. They install perfect reach time but after a few days you can see it starting to lift near the top bezel. No case touching it. Anyone else having these issues?
Click to expand...
Click to collapse
Same here, i have been using them since Galaxy S8+, never had any issues, once fitted it stayed good until damaged or removed. Now for S10+ i've had 3 replacements under warranty as it is lifting up or peeling of as they call it, and it is not even close to the edge, i have another replacement waiting to be fitted so i will try to put more glue maybe? as it looks like there is just about in the tube, I am so tempted to remove it and have just natural screen without any protectors but it is an expensive phone
All sold out here
I think I've only seen one of them on Amazon so far (this one). It looks like it might be fine - but I'm not sure $36 is where I want to be. I'm hoping we'll see some more options pop up soon.
Anyone seen anything else yet?
I'm really thinking I want something on there considering that the Flex Mode will basically be resting on the screen side whenever you use it (or you'd get a wobble on the cameras).
Whitestone just came out with one on their website.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
ninja4hire said:
Whitestone just came out with one on their website.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
Click to expand...
Click to collapse
Thanks, just purchased with the discount code Newproduct20. It was $36. I love it on my Note 10, so I'll give it a try.
So I’m assuming the stock screen protector has to be removed for the Whitestone?
The outside screen protector is no problem. It's the inner one they caution against removing.
StormCell said:
The outside screen protector is no problem. It's the inner one they caution against removing.
Click to expand...
Click to collapse
I chickened out. I cancelled the Whitestone one. I will leave it as is for a while. The Whitestone install video looks pretty complicated. I will see other reviews first. Feel like if I take off the pre installed one I might be sorry.
That video is pretty intense.
I see Verizon has a screen protector. I hope a better quality one becomes available.
lynseyw said:
I chickened out. I cancelled the Whitestone one. I will leave it as is for a while. The Whitestone install video looks pretty complicated. I will see other reviews first. Feel like if I take off the pre installed one I might be sorry.
Click to expand...
Click to collapse
If it has a factory installed protector on it, leave it on until it wears out. They provide better protection than you might first think.
Ha-ha I "tested" the one on my 10+ the 2and day I had it and faceplanted it on a rough piece of 1/16th inch aluminum angled upwards.
Marred the protector but no damage to the screen... it hit on the curved glass area, hard.
Sand will scratch these screens.
I would lean towards a wet apply urethane screen protector as they are durable, remain clear, fairly easy to apply, bubble free, self healing and are inexpensive.
Been having a good run with Gorilla IQ Sheild on my 10+. Bought 4 three months ago and still on the first one. Shows some wear on the keypad area but no scratches and I'm not babying it. Similar in feel to the factory installed protector.
ninja4hire said:
Whitestone just came out with one on their website.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
Click to expand...
Click to collapse
Do you know if this is necessary on the fold 2? The only reason I buy whitestone tempered glass for my samsung phones is because the screen is curved and whitestone makes the best glass for curved screens. If the z Fold 2 doesn't have a curved front screen, then I think most tempered glass screen protectors should work.
So I guess my main question is, does the z fold 2 have a curve to the front screen?
lynseyw said:
Thanks, just purchased with the discount code Newproduct20. It was $36. I love it on my Note 10, so I'll give it a try.
Click to expand...
Click to collapse
The screen protector is for the outer screen, you dont need a protector for inside screen. Whitestone is a good company, sadly the code did not work for me. Did anyone get lucky yet?
mmafighter077 said:
Do you know if this is necessary on the fold 2? The only reason I buy whitestone tempered glass for my samsung phones is because the screen is curved and whitestone makes the best glass for curved screens. If the z Fold 2 doesn't have a curved front screen, then I think most tempered glass screen protectors should work.
So I guess my main question is, does the z fold 2 have a curve to the front screen?
Click to expand...
Click to collapse
Sorry just saw your question. Yes the z Fold 2 has one side of the front screen slightly curved. The side that opens to be specific.
Whitestone code no longer works. As soon as people started using it they yanked it.
Anyone using the Whitestone protector? They're sold out.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
StormCell said:
Anyone using the Whitestone protector? They're sold out.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
Click to expand...
Click to collapse
Its great.. need to get a front cover thouvh..
blkghost22 said:
Its great.. need to get a front cover thouvh..
Click to expand...
Click to collapse
Still need a cover with the screen protector?
StormCell said:
Still need a cover with the screen protector?
Click to expand...
Click to collapse
Because of the edges of the glass. I can feel the edges when playing games
Just received the Whitestone screen protector and installed it. It lined up perfectly with the hole punch camera, but doesn't quite cover the entire front glass. Had no adhesive dribble out on to my phone. But, did have to move the holder around to get the adhesive to fully disperse. I'm now just hoping that the first case I put on (when one of the five I ordered arrives), doesn't break the screen protector.
CP Conductor said:
Just received the Whitestone screen protector and installed it. It lined up perfectly with the hole punch camera, but doesn't quite cover the entire front glass. Had no adhesive dribble out on to my phone. But, did have to move the holder around to get the adhesive to fully disperse. I'm now just hoping that the first case I put on (when one of the five I ordered arrives), doesn't break the screen protector.
Click to expand...
Click to collapse
Mines on the way. Pic, please
Does anyone know if any of the screen protectors on this link are actually glass, and if they are any good ? Thanks.
protectionfilms24.com/c/tempered-glass-screen-protectors/samsung-galaxy-z-fold-2/
Hello,
I have read in some forum that someone removed the PET layer because of the glass experience. I removed it on fold2 and I'm considering removing it on fold3 as well as I do not like the plastic layer compared to pure glass on fold2. Anyone did this already? Or heard anyone doing it?
First of all fold 2 has not got PET screen protector, only fold 3 has it and I can say you don't need to remove it. Since screen feels really good with PET protector so it feels like glass already with it.
Fold 2 has more like a plastic screen Protector. While fold 3 with PET is more like thin silicone protector but you don't feel silicone. It feels more like you are actually touching the glass.
Removing it puts screen more vulnerable to damage and marks that easily gets created and much more.
I know the fold2 is not PET, I have modified my post. I have my both phones in front of me - fold2 without protector (pure glass) and the fold3 - the touch is still with too much friction and I hate it. I'm ok with the unprotected glass as after months of using fold2 without any protector is totally ok without any major scratches. The question for me is - is here anyone who removed the annoying PET layer already?
festr said:
Hello,
I have read in some forum that someone removed the PET layer because of the glass experience. I removed it on fold2 and I'm considering removing it on fold3 as well as I do not like the plastic layer compared to pure glass on fold2. Anyone did this already? Or heard anyone doing it?
Click to expand...
Click to collapse
I removed it within the first hour of ownership. I removed mine on the fold 2 - to me after getting used to a phone with no protector this phone is unusable with it on. there is no reason to keep it on unless you plan on using the Spen a bunch, which I do not plan on using. I had no problems on the fold2 and the experience is night and day with and without it imo.
anyone who thinks the phone feels the same with and without the protector is flat out wrong. the phone is not as vibrant with the protector, provides a ton of fingerprints, and does not feel near the same as glass without the protector.
knives of ice said:
I removed it within the first hour of ownership. I removed mine on the fold 2 - to me after getting used to a phone with no protector this phone is unusable with it on. there is no reason to keep it on unless you plan on using the Spen a bunch, which I do not plan on using. I had no problems on the fold2 and the experience is night and day with and without it imo.
anyone who thinks the phone feels the same with and without the protector is flat out wrong. the phone is not as vibrant with the protector, provides a ton of fingerprints, and does not feel near the same as glass without the protector.
Click to expand...
Click to collapse
Im confused now - did you removed the protection also on fold3 please?
festr said:
Im confused now - did you removed the protection also on fold3 please?
Click to expand...
Click to collapse
yes, i think that was clear but I guess not. i removed the protector on the fold 2, i removed the protector on the fold 3.
I had my Z Fold 2 without a screen protector sitting next to my Z Fold 3 with the factory screen protector the other day. I could not see nor feel any difference between the two. Definitely not enough to risk damaging the screen or voiding the warranty of the ZF3.
I'm not wrong.
I've been itching to pull mine off as I've had the same screen protector before I even got the phone. The factory one is better than nothing, but I've wiped so many y finger prints off that's its annoying at this point.
Sonin66 said:
Click to expand...
Click to collapse
Did you mean to quote me?
Mr. Orange 645 said:
I had my Z Fold 2 without a screen protector sitting next to my Z Fold 3 with the factory screen protector the other day. I could not see nor feel any difference between the two. Definitely not enough to risk damaging the screen or voiding the warranty of the ZF3.
I'm not wrong.
Click to expand...
Click to collapse
Totally agree 100%. The Fold3 with factory fitted inner screen protector feels IDENTICAL to the F2 with screen protector removed.
For the above reason, removing the factory screen protector is insane and buying a 3rd party replacement screen protector is a wast eof $$$ .... better making a charitable donation than buying a 2nd one,
I will not put any third party protector as I will just keep it pure glass like it was on fold2
festr said:
I will not put any third party protector as I will just keep it pure PLASTIC like it was on fold2
Click to expand...
Click to collapse
Fixed that for you.
Mr. Orange 645 said:
Fixed that for you.
Click to expand...
Click to collapse
I removed the plastic layer on fold2 too. Hope its clear for you now.
festr said:
I removed the plastic layer on fold2 too. Hope its clear for you now.
Click to expand...
Click to collapse
I understood what you said. But the surface of the ZF2 screen is not glass.
Mr. Orange 645 said:
I understood what you said. But the surface of the ZF2 screen is not glass.
Click to expand...
Click to collapse
source? Samsung claims it is super thin glass
festr said:
source? Samsung claims it is super thin glass
Click to expand...
Click to collapse
Go to about 2:30
Yea i dont understand this glass feel.
The screen itself is a softer plastic then the protector. Hence the reason for a stronger thicker protector.
Im leaving mine on. And when it gets scratched up i am taking it to samsung for a new one so i can keep my warranty
xile6 said:
Yea i dont understand this glass feel.
The screen itself is a softer plastic then the protector. Hence the reason for a stronger thicker protector.
Im leaving mine on. And when it gets scratched up i am taking it to samsung for a new one so i can keep my warranty
Click to expand...
Click to collapse
100% this
Sonin66 said:
I've been itching to pull mine off as I've had the same screen protector before I even got the phone. The factory one is better than nothing, but I've wiped so many y finger prints off that's its annoying at this point.
Click to expand...
Click to collapse
Okay, is it just me or does this screen protector NOT go edge-to-edge? What's the point when it does not even cover the entire screen like the factory one?
I'm still waiting for mine, but I highly doubt I will pull the factory protector off and put on a 3rd party one that does not even cover the entire screen, ESPECIALLY with how much WhiteStone charges for their stuff, and, with being even more blatantly honest, their quality has suffered...
Talderon said:
Okay, is it just me or does this screen protector NOT go edge-to-edge? What's the point when it does not even cover the entire screen like the factory one?
I'm still waiting for mine, but I highly doubt I will pull the factory protector off and put on a 3rd party one that does not even cover the entire screen, ESPECIALLY with how much WhiteStone charges for their stuff, and, with being even more blatantly honest, their quality has suffered...
Click to expand...
Click to collapse
I know mine doesn't cover the full screen, maybe 1-2 mm off around the whole screen. But I can understand where you get their quality has gone down. Had whitestone on my 21u, and the first screen protector that came with jig was superb. Their replacement didn't seem to last long. I still haven't installed mine though..
I did the steps people have said to do like increase touch sensitivity and re add all the fingers I would use but it still won't work. I don't know who made this protector since I got it off a marketplace site and when I met with the person all he gave me was the screen protector. It was only $5 i got it for so no big deal if it's ****.
Other than that it feels good and everything else works fine.
There are some other threads on here about glass screen protectors. The majority don't work with FP, but there are some that do. Check those threads for info.
In general you need to go for the UV glued type..... All the ones with just glue on the edges will leave an air gap between screen and glass, this heavily impedes with FP functionality.....
Is the brand on Google's approved list?
s3axel said:
In general you need to go for the UV glued type..... All the ones with just glue on the edges will leave an air gap between screen and glass, this heavily impedes with FP functionality.....
Click to expand...
Click to collapse
The air gap has nothing to do with it, the Pixel 6 with its perfectly flat screen has the same problems, my wifes Spigen one has rendered her FPS useless.
MrBelter said:
The air gap has nothing to do with it, the Pixel 6 with its perfectly flat screen has the same problems, my wifes Spigen one has rendered her FPS useless.
Click to expand...
Click to collapse
Thanks, maybe the cause is not as simple as I assumed... Still my experience remains over many phones: the edges-only glued glass protectors just don't work (for me )
s3axel said:
Thanks, maybe the cause is not as simple as I assumed... Still my experience remains over many phones: the edges-only glued glass protectors just don't work
Click to expand...
Click to collapse
I'm not disputing that, i was just clarifying the Pixel 6 suffers the same problem even with a flat screen.
Never had a problem with a 1+ phone using a glass protector over the FPS even with the cheapest crap i could find so as far as i am concerned all the reasons Google are coming out with are absolute cobblers.
So should I just take this thing off or wait for a software update from Google?
I for myself have installed a TPU screen protector presently, awaiting delivery of a UV glass protector as I like those more
I'd hope Google improves the behaviour of the FPS, in how far however I don't know.....
I am currently using the below TPU screen protector and could not be happier with it. My fingerprint scanner works nearly every single time and I have not had an issue. Once the screen protector has been properly applied (I admit, I screwed it up the first time) I cannot even tell that it is on my screen visibly or by touch.
Having said that, I am a little concerned that a TPU screen protector is not as good in general as a glass one. I have not had an issue yet, but I also have not had an accidental drop or anything.
I will also say that I have registered each of my thumbs twice. I will get an occasional "longer" read, and by longer, maybe a half a second longer. However, I have noticed that when that happens, my thumb is slightly out of the read circle. When my thumb is dead center, it reads it every time really quickly.
I am not all that excited about a UV glass protector as I have read horror stories of discoloration and some users not being able to get them off.
Supposedly Google has released their approved screen protectors list. I am not about to spend 50 bucks on a Zagg. The one for Panzer was more reasonable, but it disappeared off their website. The Otterbox is another TPU and I like the one I have:
Amazon.com
I might just take this off and use nothing. I didn't use a protector for my s7 edge or s10+ and didn't get a single scratch. I only got it because I wanted to preserve the oilyaphobic coating. This thing only cost me $5 in the end
Did peeps make sure to use the increased screen sensitivity setting for use with screen protectors?
KedarWolf said:
Did peeps make sure to use the increased screen sensitivity setting for use with screen protectors?
Click to expand...
Click to collapse
yes, it makes zero difference.
Typically with curved screens, you need a full-screen adhesive in order for the FPR to work after installation. Either that, or one with edge adhesive with an area over the reader that also sticks to the screen, but I personally think those are kinda ugly. For the regular P6, my girlfriend ordered a brand called "TOCOL" for a glass protector, which is working great all around.
If/when Whitestone Dome releases one for the P6P, that will be the only really good option. It's either that, or buy an edge adhesive style one, buy LOCA glue and a UV lamp, and DYI it. Only way you're going to have glass and a working FPR.
I'm using a TPU protector and a case. TPU has come a long way tbh, the dry install ones I got feel like a naked screen and give me some piece of mind in regard to small scratches. The case does the rest as far as drop protection. Victus Glass is pretty good for shatter resistance generally, but crap for scratches.
OP, I would remove that one if you want to use the Fingerprint Reader. There isn't a software update that's going to solve that problem unfortunately. I'd just use a decent TPU for now and if you really want glass after you try it still pray for Whitestone Dome. There's another thread on here dedicated to working protectors, I'd check that out and pick one.
Pixel 6 Pro screen protector
Hi all, I have a few questions around tempered glass screen protectors for curved screens like the Pixel 6 Pro, I was wondering if people had any answers to: Are there any known brands that do good quality curved tempered glass screen...
forum.xda-developers.com
orlans21 said:
I did the steps people have said to do like increase touch sensitivity and re add all the fingers I would use but it still won't work. I don't know who made this protector since I got it off a marketplace site and when I met with the person all he gave me was the screen protector. It was only $5 i got it for so no big deal if it's ****.
Other than that it feels good and everything else works fine.
Click to expand...
Click to collapse
If you prefer the 9H glass protectors, you'll have to find a glass protector that is "Google certified" to work with fingerprint reader.
These are glued to the screen to make 100% positive contact with the glass protector.
I'm guessing you have a 9H glass protector like mine that has a very small air gap between the screen and the protector. Even with the enhanced fingerprint reader setting, my fingerprint reader doesn't pick up anything.
The TPU flexible protectors supposedly work well, but I like the 9H glass protectors.
The Google Certified 9H glass protectors that I've found are between $15 - $39 per protector, and many of them are "out of stock" at the moment.
MrBelter said:
The air gap has nothing to do with it, the Pixel 6 with its perfectly flat screen has the same problems, my wifes Spigen one has rendered her FPS useless.
Click to expand...
Click to collapse
Yeah it's only the Pro model that has curved screens and requires UV glue protectors, which there is currently none available until Whitestone Dome releases. I managed to get this and it works perfectly but it's already out of stock [3 Pack]Google Pixel 6 Pro Screen Protector,Akcoo Liquid UV Tempered Glass [Full Screen Adhesive][Edge to edge coverage][Compatible with fingerprint sensor] for Pixel 6 Pro 6.7 inch https://www.amazon.com/dp/B09KC72DW...abc_YW4QX456AX8GJ33BV928?_encoding=UTF8&psc=1
orlans21 said:
So should I just take this thing off or wait for a software update from Google?
Click to expand...
Click to collapse
Have you tried to delete the finger print and add a new one?
lucky_strike33 said:
Have you tried to delete the finger print and add a new one?
Click to expand...
Click to collapse
yeah, i got rid of the protector. it was garbage