Develop Bugs

OnePlus X - Tempered Glass Screenprotector

I ordered the original temepered glass screenprotector with my OnePlus X and I'm really disappointed about it. I want to know if anyone else has the same issue.
There's still air all around the edges. Really regret peeling of the plastic protector that comes pre-installed .
Wanted to order a Orzly one but they pulled it out of the website( maybe the same problems??)
Noticed this on the Nillkin site: "Because the phone has posted under arc, film after about a slight white border, is normally" .....
Is there or will there be a better one, or has anyone good experience with this type of protectors on curved screens?
Here's a picture of the original protector installed

did you buy it from OP store?

Kéno40 said:
did you buy it from OP store?
Click to expand...
Click to collapse
Yes, already made a ticket at OP, but no response yet.

It looks like you didn't applied it well...

Kéno40 said:
It looks like you didn't applied it well...
Click to expand...
Click to collapse
It does look like that indeed. But it is perfectly aligned with the speaker and screen. Its not my first screen protector that i apply.. So I think it's not my fault..
I contacted Orzly today to ask if they are planning to release the Tempered Glass Protector for the OPX, as they where available a week ago as pre-order but not on the site anymore.
This was the answer I got:
"Unfortunately we are not planning to realised Tempered Glass Screen protector for the One Plus X. one plus x screen is too curved and we are not pleased with the fitting of the glass screen."
Seems like they have the same problem...

Is your glass 2.5D too (not talking about the screen of course )

Kéno40 said:
Is your glass 2.5D too (not talking about the screen of course )
Click to expand...
Click to collapse
No the original one isnt. But that doesnt has anything to do with the fitting to the screen.
I'm bought this one: https://oneplus.net/oneplus-x-tempered-glass-screen-protector

I ordered 2 of them, already have the phone so hope the shipping will not be too slow. I'll tell you when I get them.

fuske said:
I ordered the original temepered glass screenprotector with my OnePlus X and I'm really disappointed about it. I want to know if anyone else has the same issue.
There's still air all around the edges. Really regret peeling of the plastic protector that comes pre-installed .
Wanted to order a Orzly one but they pulled it out of the website( maybe the same problems??)
Noticed this on the Nillkin site: "Because the phone has posted under arc, film after about a slight white border, is normally" .....
Is there or will there be a better one, or has anyone good experience with this type of protectors on curved screens?
Here's a picture of the original protector installed
Click to expand...
Click to collapse
You better use film rather than tgsp with such curved screen.

My father has the same problem with Note4 - edges of tempered glass is not round but straight, and screen is slightly round on the edges. I also planed to buy glass protector for my OPX but now i see that is not so good idea. I better wait for some hard case and i will live that original screen protector and i wish you well, maybe there will be curved tempered glass for our phones... who knows...

I ordered a similar one off Ebay. The same happened to me. I'm pretty good at applying screen protectors. There is air all around the edges. I bought a similar one for my wifes S5 and that went on perfect you can't even tell it's on. I'm sticking with it as the glass ones have saved my skin on other phones more than once.
Sent from my ONE E1003 using XDA Free mobile app

cxm0429 said:
You better use film rather than tgsp with such curved screen.
Click to expand...
Click to collapse
For the looks maybe but a tgsp protects the screen much more!

I also ordered the NILLKIN, because I wasnt happy with the original one. I ordered the H + with rounded edges.
It was delivered today and was going to hesitate to go try this, eventually just went ahead and tried under the guise, "it can not be worse!"
I came to the conclusion that it was exactly the same size so probably had the same problem as the original.
And that was true, unfortunately, ...
So NILLKIN has the same problem as the original of OnePlus!
But!...
In contrast to the original is the NILLKIN H + rounded off at the edges so that feels better. Something also bothered me!
Conclusion, this is one better than the original! (Imho)

Someone on OP forums speaked about Sundatom Tempered Glass 9H 0.2mm 2.5D arc edge
One more to test....

2.5D means that only the edges of glass are rounded I don't think this cover whole screen (I hope I'm wrong)

Dizzyrul3z said:
2.5D means that only the edges of glass are rounded I don't think this cover whole screen (I hope I'm wrong)
Click to expand...
Click to collapse
Did you read what's in the image i posted :
"glass curved down the screen side"
This one pretend to be what i'm waiting for. Maybe I'll try it after a chinese tester confirm that.

do any one bought from ebay?? www.ebay.com/itm/Tempered-Glass-Thi...987978?hash=item3d08767cca:g:Rs0AAOSwYHxWQG~P

Kéno40 said:
Someone on OP forums speaked about Sundatom Tempered Glass 9H 0.2mm 2.5D arc edge
One more to test....
Click to expand...
Click to collapse
I ordered the one mentioned above to test. Its only a couple of dollar..

Kéno40 said:
Did you read what's in the image i posted :
"glass curved down the screen side"
This one pretend to be what i'm waiting for. Maybe I'll try it after a chinese tester confirm that.
Click to expand...
Click to collapse
Yes I read that but a few times I met with the auction description was not as same as the item that I got.

fuske said:
I ordered the one mentioned above to test. Its only a couple of dollar..
Click to expand...
Click to collapse
Can you add a link ? Couldn't find it on web.

Recommend Temper Glass Screen Protectors?

Could someone please recommend a good glass screen protector?
Thank you in advance!

Push, i am also looking for a good temp glass.
Anyone has experiences with good temp glass and would recommend it?
Gesendet von meinem EVR-AL00 mit Tapatalk

torr310 said:
Could someone please recommend a good glass screen protector?
Thank you in advance!
Click to expand...
Click to collapse
Nillkin Amazing H+ Pro tempered glass screen protector for Huawei Mate 20 X
I am using it on my mate 20X now. As usual, nillkin produces good quality glass screen protector at a reasonable price

nitric75 said:
Nillkin Amazing H+ Pro tempered glass screen protector for Huawei Mate 20 X
I am using it on my mate 20X now. As usual, nillkin produces good quality glass screen protector at a reasonable price
Click to expand...
Click to collapse
Thank you for the recommendation!

I ordered a Whitestone type liguid adhere temp glass protector from Ali, it should arrive in the next few days.
https://goo.gl/SGmrK2

SWBgHz said:
I ordered a Whitestone type liguid adhere temp glass protector from Ali, it should arrive in the next few days.
https://goo.gl/SGmrK2
Click to expand...
Click to collapse
I am not sure what whitestone means. Thank you for the link! Could you please let me know how it feels upon receipt?

SWBgHz said:
I ordered a Whitestone type liguid adhere temp glass protector from Ali, it should arrive in the next few days.
https://goo.gl/SGmrK2
Click to expand...
Click to collapse
Why would you need this if screen isn't curved? I have a Pixel 2 XL. And liquid adhesive is a expensive and a pain to install.

Tempered glass
Is the Nilkins tempered glass compatible with the clear case provided in the box?
I have installed 2 tempered glass and both will have air bubles when used together with clear case provided in the box
2nd question, anybody has experience using screen protector clearplex or X-one?

why guys need screen protector i use the protector comes with phone or im wrong there is one come with phone just remove number 2 sticker ?? plz tell me that also screen protector

barcaloney10 said:
why guys need screen protector i use the protector comes with phone or im wrong there is one come with phone just remove number 2 sticker ?? plz tell me that also screen protector
Click to expand...
Click to collapse
That is a plastic screen protector, most people install glass to protect their phone.

hattrickho said:
That is a plastic screen protector, most people install glass to protect their phone.
Click to expand...
Click to collapse
so its better to remove it and install glass ? or i can install over it ?

barcaloney10 said:
so its better to remove it and install glass ? or i can install over it ?
Click to expand...
Click to collapse
I removed mine to install glass. Better protection.
Yea! You can install glass over it. I did it on my first glass screen protector but the screen is not as clear to install glass alone.

torr310 said:
I am not sure what whitestone means. Thank you for the link! Could you please let me know how it feels upon receipt?
Click to expand...
Click to collapse
Order screwed up and never arrived, think the seller just didn't know how to send to US.
def-g said:
Why would you need this if screen isn't curved? I have a Pixel 2 XL. And liquid adhesive is a expensive and a pain to install.
Click to expand...
Click to collapse
Expensive, yes. I find easy to install though and while it has more steps it is far easier to get a perfect type fit, in the end. Regular temp glass lifts off, gets stuff under the edges, and is prone to that oil slick effect - the liquid adhere types solve those issues and aside from better fit/feel they last longer.

Hmm seeing as the Mate 20X screen is mostly flat and a little curve at the extreme edge (similar to iphones), is there any decent full coverage (those with the black borders) tempered glass for it?
I've seen a few at the shops but when i test fit them over my screen i can see that the black border covers some of the pixels of the screen, making it look like "surrounded" or "covered". like if you were to view an old website (where they put absolutely no padding at all) the left and the right side of the text will be cut off (Eg, the first letter "A", probably the left leg will be cut off)
This is also a problem I noticed with my iPhone X, most full coverage tempered glass being sold have their black borders a little too thick and will "eat" into the screen when applied, so far the only tempered glass i know of that has black borders and not exhibit this issue is the one by spigen (google for pics), their black border is thin enough that it does not interfere with the screen.
Wondering if such a product exists for the Mate 20 X?

I have the black border Tempered Glass on my Mate 20 X and also i have used these black borders Tempered glass for my Xiaomi Mi Mix 18K. Yes, it is true, they ,, eat '' a little bit from the screen edges, but i would rather prefer these and have a full coverage rather than the crystal clear ones and have the screen protected like 90%... as those dosen't fit on the entire screen. I don't mind at all the borders... it's only about 2mm , barely notice in everyday use...
So, if you guys want to have full coverage and full protection for the screen, goes for the black borders tempered glass... my honest opinion...

filip_pine said:
I have the black border Tempered Glass on my Mate 20 X and also i have used these black borders Tempered glass for my Xiaomi Mi Mix 18K. Yes, it is true, they ,, eat '' a little bit from the screen edges, but i would rather prefer these and have a full coverage rather than the crystal clear ones and have the screen protected like 90%... as those dosen't fit on the entire screen. I don't mind at all the borders... it's only about 2mm , barely notice in everyday use...
So, if you guys want to have full coverage and full protection for the screen, goes for the black borders tempered glass... my honest opinion...
Click to expand...
Click to collapse
Those only have adhesive around the edges correct? Dot matrix and some rainbow effect, no?
Sent from my HUAWEI EVR-AL00 using XDA Labs

I've currently found one (google hoda mate 20 x tempered glass, I can't post links), 1st or second result, the black borders seem to be rather thinner, might want to order one to test but its about $20

def-g said:
Those only have adhesive around the edges correct? Dot matrix and some rainbow effect, no?
Click to expand...
Click to collapse
That's true, rainbow effect and matrix, but i don't mind at all, is better to protect the entire screen rather than just 90% of the surface...
The matrix and rainbow effect is visible only with the screen off, with the screen turned on you can't see these effects...

I would still love to find a Whitestone type adhesive temp glass protector if anyone comes across a good one they would recommend.

SWBgHz said:
I would still love to find a Whitestone type adhesive temp glass protector if anyone comes across a good one they would recommend.
Click to expand...
Click to collapse
You could grab those black border style adhesive at sides type tempered glass and convert it to those full loca glue type, just strip away all the extra film and leave it with the bare glass, then just get those spare glue tubes used in whitestone and apply it yourself, i did the same thing with my XZ2 Compact seeing no one sells a whitestone type full coverage protector so i did it myself
But for now, I am quite happy with my Nillkin H+ tempered glass (especially coming from me, since i am the type that normally prefers those full coverage full adhesive types), yes, it does not go all the way to the edge but as i'm using it with the provided huawei TPU case it fits just fine, more important is to protect the screen and get back that "glass" touch.

Question Screen protector question

Are there any issues with having a screen protector on this curved screen? Are they harder to put on? Do they tend to come off? I'm trying to decide between getting the Pro or the regular version. I know in the past there were issues with curved screens. In addition to what's mentioned above, the screen protectors for curved screens didn't provide complete coverage. TIA

If your happy with none tempered glass then curved isn't a problem. I've still got the one that came with my devices and have no issues with keeping it on for as long as possible

There some nice uv light glue +tempered glass on aliexp, i'm waiting for mine, i had curved displays before and it's the best you can get, the glue is really there to be on all the surface nad even on the curves, i'm tempted to install some s20+ protector on my 9pro because it's the same size nad curves, till the ones i'm waiting for arrives

It's ok, but my devices prefer naked...

Chinaroad said:
There some nice uv light glue +tempered glass on aliexp, i'm waiting for mine, i had curved displays before and it's the best you can get, the glue is really there to be on all the surface nad even on the curves, i'm tempted to install some s20+ protector on my 9pro because it's the same size nad curves, till the ones i'm waiting for arrives
Click to expand...
Click to collapse
I've ordered a couple too.
I bought the Spigen NeoFlex from Amazon, they are a TPU protector and they are useless, too flexible to apply easily and also the edges do not stay stuck down to the curve so would pick up dirt and come off easily. I sent back for a refund as not fit for purpose in my view.

I bought the Zagg InvisibleShield GlassFusion+ for my Pro and the normal tempered glass by Zagg for my 9. Both with the eye comfort, micropel bs. The GlassFusion+ is the old school "rubbery" type screen protectors. It definitely feels like glass, but isn't glass. It goes somewhat to the edges of the glass. Maybe stops ⅛" from the actual end of the curve. Bubbles like crazy by the curves. Keep having to smooth them out but they keep showing up. Not sure if it's cause of the screen protector or not. Went to register them with Zagg and had to talk to customer care and it escalated to a supervisor because apparently they're not even in their system yet. Go figure lol

Chinaroad said:
There some nice uv light glue +tempered glass on aliexp, i'm waiting for mine, i had curved displays before and it's the best you can get, the glue is really there to be on all the surface nad even on the curves, i'm tempted to install some s20+ protector on my 9pro because it's the same size nad curves, till the ones i'm waiting for arrives
Click to expand...
Click to collapse
Link?

dalelindley76 said:
If your happy with none tempered glass then curved isn't a problem. I've still got the one that came with my devices and have no issues with keeping it on for as long as possible
Click to expand...
Click to collapse
Are you saying that the phone comes with a tempered glass screen protector and there are no issues with it?

It sounds like for the curved screen the tempered glass is better and for the flat screen you can use TPU. Is that the consensus?

https://a.aliexpress.com/_mP1hlMF
i still cant recommand it yet because didn't receive it, but what i do recommand is a screen protector that come with the glue and uv light, because the glue will be at all the surface, hardens fast, no bubles, and it does not come loose easily

bird333 said:
It sounds like for the curved screen the tempered glass is better and for the flat screen you can use TPU. Is that the consensus?
Click to expand...
Click to collapse
I've not recieved my glass ones, and I'd certainly go with a LOCA/UV glue version as those that are out on Amazon look to not be full glue coverage, some even just have the top,sides and finger print scanner and they look awful.
I can safely say though that I feel a TPU one would be false economy as not only do they offer very little in the way of drop protection, the one I tried didn't fit well at all.

On my 8 pro , I've used a few UV type glued protectors with no issues at all with Whitestone Dome being my favorite for a genuine feel and solid protection. I emailed them and they said later this month for the 9 pro. If you go this route justake sure to put the sticker over your ear piece when applying the glue.

Samuel Holland said:
On my 8 pro , I've used a few UV type glued protectors with no issues at all with Whitestone Dome being my favorite for a genuine feel and solid protection. I emailed them and they said later this month for the 9 pro. If you go this route justake sure to put the sticker over your ear piece when applying the glue.
Click to expand...
Click to collapse
Whitestone Dome was the best I had on previous phones. Thanks for the info on time frame. My factory-installed film protector just started to lift on one edge yesterday so I'm ready to buy a replacement, but I'll probably wait and get one of those.

Question Query on screen protectors

There were replacement screen protectors for the main screen of the Z Fold2. I noticed Whitestone and other companies are advertising screen protectors for the Fold3. I assume these would be applied on the main screen directly as the Fold3 does not have a Samsung installed protector?
Also any recommendations for the front screen?

I believe the internal has a preinstalled screen protector. Same as the fold 2.
I was unable to get information if the exterior one has a screen protector or not.
I would think so since it seems normal for samsung now.

xile6 said:
I believe the internal has a preinstalled screen protector. Same as the fold 2.
I was unable to get information if the exterior one has a screen protector or not.
I would think so since it seems normal for samsung now.
Click to expand...
Click to collapse
Idk I tried out the phone in store, and this iteration of the fold felt more like glass and less like plastic and I didn't see a noticeable screen protector like the Fold 2.

Thinking about getting Ferilinso Designed for Samsung Galaxy Z Fold 3 5G Flexible TPU Screen Protector. Just a precaution, rather safe than sorry.

Fatmonk8 said:
Idk I tried out the phone in store, and this iteration of the fold felt more like glass and less like plastic and I didn't see a noticeable screen protector like the Fold 2.
Click to expand...
Click to collapse
They did say thicker protector and its tpu i believe.
I had screen protectors that feel "like glass" vs cheap plastic before.
Either way all a step in the right direction

xile6 said:
They did say thicker protector and its tpu i believe.
I had screen protectors that feel "like glass" vs cheap plastic before.
Either way all a step in the right direction
Click to expand...
Click to collapse
Well whatever they did, I was very impressed with what I felt today and it made my decision to make the jump and pre-order

They changed the screen protector to PET, this is one of the best and most overlooked features.

Semantics said:
They changed the screen protector to PET, this is one of the best and most overlooked features.
Click to expand...
Click to collapse
Thanx for the correction. Cant believe i forgot it was pet with all the 3d printing i do lol..

Fatmonk8 said:
Well whatever they did, I was very impressed with what I felt today and it made my decision to make the jump and pre-order
Click to expand...
Click to collapse
Where did you find it in store? I haven't actually held one yet but my order is in. Thought about swinging by a Best Buy soon.

94b20gsr said:
Where did you find it in store? I haven't actually held one yet but my order is in. Thought about swinging by a Best Buy soon.
Click to expand...
Click to collapse
Best buy had one but it was off and I couldn't power it on, Verizon had one on and working, so I got to actually play with it. I'm telling you, the improvements they did to the folding screen are amazing imo. That's always been my thing that keep me from getting the fold, but as soon as I felt how much better it was on the 3, I went ahead and pre-ordered.

Fatmonk8 said:
Idk I tried out the phone in store, and this iteration of the fold felt more like glass and less like plastic and I didn't see a noticeable screen protector like the Fold 2.
Click to expand...
Click to collapse
MrMobiles review advised they have used a new type of screen protector this year that ends underneath the bezels of the screen, so its more 'built in' than ever. It's also not made from TPU, so you wont get those nasty finger smudge marks as much.

vinokirk said:
MrMobiles review advised they have used a new type of screen protector this year that ends underneath the bezels of the screen, so its more 'built in' than ever. It's also not made from TPU, so you wont get those nasty finger smudge marks as much.
Click to expand...
Click to collapse
Maybe they were tired of repair screens of people who ripped the protector off and somehow damaged the screen, lol. I changed screen protectors on my z Fold 2 weekly trying to find the right one and the screen was always perfect.
Also the PET screen protectors definitely don't smudge as much and they're easier to wipe off. I hope they're scratch resistant if they're making it harder to remove. I'm ocd about hairline scratches in my screen protectors. Drives me insane.

Hi, I have removed the screen protector on my fold2 and I'm using it for months without any protectors - I could not stand the plastic feelings - the glass touch is perfect on the fold2 and it does not scratch that much. I'm curious - as the fold 3 has now non removable PET layer - how it would be compared to the fold2 without any protectod vs the fold 3 ?

Watching some videos from Korea, and it seems Whitestone Dome has a UTG screen protector for the inner folding screen.
Sorry, video is in Korean, but no doubt you can work it out from watching.
Whitestone Dome Silk.

Dolgogi said:
Watching some videos from Korea, and it seems Whitestone Dome has a UTG screen protector for the inner folding screen.
Sorry, video is in Korean, but no doubt you can work it out from watching.
Whitestone Dome Silk.
Click to expand...
Click to collapse
I think that thing is like $80.

My whitestone silk is arriving tomorrow, still waiting on my phone to ship out next week

I hope that this PET protector wil be still possible to remove to have nice glass experience.

On my fold 3 I can feel a edge from screen protector so it seems to be removable, it isn't embedded under the plastic frame.

You already have fold 3? Can you please tell me how is the feeling / touch on the built in PET protector? Is it glass like touch/look?

festr said:
You already have fold 3? Can you please tell me how is the feeling / touch on the built in PET protector? Is it glass like touch/look?
Click to expand...
Click to collapse
Yes that is correct I got mine on 18th August after ordering it on 11th August. I can say surface is smooth and feels good. Hardly any visible finger prints when device is on. Like it is with those plastic ones that makes it visible.

Accessories Screen Protector for OnePlus 11!

Suggest me a good quality screen protector to get for the OnePLus 11 which I'm going to get on 7th Feb!

As always for, a real good quality is glass screen protector from Aliexpress, 2pcs for around 10-15USD, glue and UV light.
I have used cheap chinese glass protectors for my Iphone 12, OP7Pro, OP 8T and always was very happy with them.
The only other and real alternative for me is a synthetic sapphire glass protector for ~100USD. All the other protector between them are pretty much the same in the long run.

cavist said:
As always for, a real good quality is glass screen protector from Aliexpress, 2pcs for around 10-15USD, glue and UV light.
I have used cheap chinese glass protectors for my Iphone 12, OP7Pro, OP 8T and always was very happy with them.
The only other and real alternative for me is a synthetic sapphire glass protector for ~100USD. All the other protector between them are pretty much the same in the long run.
Click to expand...
Click to collapse
Isn't that the UV and glue protector sticks completely like a superglue and it's very hard to remove it, saw some videos about them.
I've seen the Sapphire glass protector it is great but too expensive for me! I've my eyes on Spigen, Gadgetshieldz screen guard, and ESR but I want a user experience so I can buy one for my phone.

Wasim_Bu said:
Isn't that the UV and glue protector sticks completely like a superglue and it's very hard to remove it, saw some videos about them.
I've seen the Sapphire glass protector it is great but too expensive for me! I've my eyes on Spigen, Gadgetshieldz X Glass, and ESR but I want a user experience so I can buy one for my phone.
Click to expand...
Click to collapse
Not at all, they are quite easy to remove. At least Mocolo ones.

cavist said:
As always for, a real good quality is glass screen protector from Aliexpress, 2pcs for around 10-15USD, glue and UV light.
I have used cheap chinese glass protectors for my Iphone 12, OP7Pro, OP 8T and always was very happy with them.
The only other and real alternative for me is a synthetic sapphire glass protector for ~100USD. All the other protector between them are pretty much the same in the long run.
Click to expand...
Click to collapse
No matter what phone I use.. amFilm Glass screen protecter is always good

The OnePlus 10 pro screen protectors work great on the 11

slaytanic said:
The OnePlus 10 pro screen protectors work great on the 11
Click to expand...
Click to collapse
Is the dimension of both devices the same?

Wasim_Bu said:
Is the dimension of both devices the same?
Click to expand...
Click to collapse
I believe the screen is exactly the same size? The protector fits perfectly on the screen.

slaytanic said:
I believe the screen is exactly the same size? The protector fits perfectly on the screen.
Click to expand...
Click to collapse
Nice, I'll check out some tempered glass brands, or else I'm going to get a film protector from Gadgetshieldz because the tempered glass on a curved-display phone will break more easily than on a flat-screen phone! I've seen reviews on drop tests where the glass breaks because the case will not fully cover the curved edges.

I don't use screen protector.
After 4 years using a 6T, i just got a very thin line only visible under light and close inspection. Moreover, a 45Kg dummbell fell exactly over the screen phone (it was on the floor) and....crystal clear, not even a single mark or damage/deformation on the screen. ¿The almost invisible scratch? Carrying both phone and keys toguether, or even worse but it's plausible. I also owned the Nexus 4/5 and Moto Z Force and don't remember any scratch, at least no one to be concerned.
It's not the answer to you question but just a suggestion, don't spoil the touch/slide feeling, cleariness, and clean look of a naked screen. Of course you can get one of those stupid pseudo-"tempered glass" 9H (it's actually cheap polymer plastic), ... or a simple plastic one wich will be always shady due to have dozens of fingerprints (it's oil after all) without remedy) and will left a yellowish tint over the surface of the crystal (this is a fact, not my subjective impression).
Oh, i remember my Nexus 4, i also thought screen protector was a must, well after a year, i gor rid of it (the tint left by the plastic was there) and never looked behind.
And now we (I) have a more shadows fae beyond like turning a 799$ high end phone (Apple/samsung/former Huawei/etc consider OP10 not a high end (i don't want to say flagship) a mid range ) in a 206g brick.
Bumper case is another story. Now using the 1+ Sandstone and the same issue as with OP6T again, ****, the slider is almost unreachable to be operated propertly. I have been using a generic silicon case while i was waiting the new case, and slider hole was fine, hey, 1,89$ in AliExpress. I just bought it (the same) from Amazon for 10€, of course returned it with a random excuse when i got the new case. I will probably order half a dozen from Ali just to try.
I wass expecting the horror with ColOrxygenOS, but for the moment i havent suffered a stroke

hank81 said:
I don't use screen protector.
Click to expand...
Click to collapse
I've never used screen protectors either. I've got 2 front pockets - one for my keys and one for my phone. It's not that hard. Anything that would actually damage the screen would shred the protector and damage your screen anyway. I've never had any scratches on my screens and a screen protector is not going to save you from an unlucky drop. I really don't see the point.

Stopped counting how many times I dropped my phone and it was saved by a glass screen protector - I would probably say dozens of time and I usually go through 2-3 protectors on each phone in average, depending how long I can live with a look of cracked protector before replacing it.
With typical, accidental drops the additional glass layer absorbs the impact and the phone just bounces of the impact area. In my personal experience for last 10 years with HTC M7, M9, Oneplus 7 Pro, Oneplus 8T and iPhone 12, I have never encountered a drop forceful enough to penetrate the protective layer and damage the actually screen glass under it.
Sure, it is possible but never happened to me when dropping phone from front jacket pocket heights, pants pocket height, going in or out of the car with a phone in the hand, pushing the phone from shelf or the bathroom sink etc.
Last week I removed my uv glass screen protector from OP7Pro that I was preparing for a trade in and it looked perfect and if I would want to trade it locally I would get a slightly better price for a mint condition screen rather than a used one for 5 years.

I've had pretty good luck with film over the years and the ONLY reason I started using them is they don't attract finger prints as bad as glass.

rebar71 said:
I've never used screen protectors either. I've got 2 front pockets - one for my keys and one for my phone. It's not that hard. Anything that would actually damage the screen would shred the protector and damage your screen anyway. I've never had any scratches on my screens and a screen protector is not going to save you from an unlucky drop. I really don't see the point.
Click to expand...
Click to collapse
For some reason I started using tempered glass ones for the year I had an iphone 12 pro. I broke like 4 of them, it was ridiculous. I stopped using them after a few months and never did manage to hurt the screen, even though I broke the "protectors" left and right. And I use my phones in industrial applications (Im an industrial maintenance tech), they take some abuse.
Fwiw this phone comes with a film protector already applied out of the box. I haven't removed it yet and it's been fine so far.

ummduh said:
For some reason I started using tempered glass ones for the year I had an iphone 12 pro. I broke like 4 of them, it was ridiculous. I stopped using them after a few months and never did manage to hurt the screen, even though I broke the "protectors" left and right. And I use my phones in industrial applications (Im an industrial maintenance tech), they take some abuse.
Fwiw this phone comes with a film protector already applied out of the box. I haven't removed it yet and it's been fine so far.
Click to expand...
Click to collapse
Exactly. I'll leave the pre-installed screen protector on until it looks like ****. But when it's time to take it off, I won't replace it. Did the same with my 6T.

I see here people have said the 10 pro screen protectors fit, now that a lot more people have the phone has anyone tried this with any tempered glass ones with success?

Any OnePlus 10 Pro screen protector will work on the 11 since the screen (in physical size) is the same.
I use film protectors for a couple of years now and pretty happy with them
SmartDevil on aliexpress released good film protectors for a fair price

Svid said:
Any OnePlus 10 Pro screen protector will work on the 11 since the screen (in physical size) is the same.
I use film protectors for a couple of years now and pretty happy with them
SmartDevil on aliexpress released good film protectors for a fair price
Click to expand...
Click to collapse
4 days ago I ordered the SmartDevil glass since it seems to be a chinese copy of Whitestone glass with the entire bundle (minus the glue foams for the bracket).
I ordered also 2 no name glass screens on 9th of February but it still in shipping, no idea if it will be delivered.
I was curious about the SmartDevil bundle so we will see how much does it actually helps and what is the quality of the bracket.

mikebb00 said:
I've had pretty good luck with film over the years and the ONLY reason I started using them is they don't attract finger prints as bad as glass.
Click to expand...
Click to collapse
Yes, mine is good too without smudges!

ummduh said:
For some reason I started using tempered glass ones for the year I had an iphone 12 pro. I broke like 4 of them, it was ridiculous. I stopped using them after a few months and never did manage to hurt the screen, even though I broke the "protectors" left and right. And I use my phones in industrial applications (Im an industrial maintenance tech), they take some abuse.
Fwiw this phone comes with a film protector already applied out of the box. I haven't removed it yet and it's been fine so far.
Click to expand...
Click to collapse
Yes, tempered glasses always break often so as I said before a film protector and a case covering the edges of the screen is enough for protection!