I ordered the original temepered glass screenprotector with my OnePlus X and I'm really disappointed about it. I want to know if anyone else has the same issue.
There's still air all around the edges. Really regret peeling of the plastic protector that comes pre-installed .
Wanted to order a Orzly one but they pulled it out of the website( maybe the same problems??)
Noticed this on the Nillkin site: "Because the phone has posted under arc, film after about a slight white border, is normally" .....
Is there or will there be a better one, or has anyone good experience with this type of protectors on curved screens?
Here's a picture of the original protector installed
did you buy it from OP store?
Kéno40 said:
did you buy it from OP store?
Click to expand...
Click to collapse
Yes, already made a ticket at OP, but no response yet.
It looks like you didn't applied it well...
Kéno40 said:
It looks like you didn't applied it well...
Click to expand...
Click to collapse
It does look like that indeed. But it is perfectly aligned with the speaker and screen. Its not my first screen protector that i apply.. So I think it's not my fault..
I contacted Orzly today to ask if they are planning to release the Tempered Glass Protector for the OPX, as they where available a week ago as pre-order but not on the site anymore.
This was the answer I got:
"Unfortunately we are not planning to realised Tempered Glass Screen protector for the One Plus X. one plus x screen is too curved and we are not pleased with the fitting of the glass screen."
Seems like they have the same problem...
Is your glass 2.5D too (not talking about the screen of course )
Kéno40 said:
Is your glass 2.5D too (not talking about the screen of course )
Click to expand...
Click to collapse
No the original one isnt. But that doesnt has anything to do with the fitting to the screen.
I'm bought this one: https://oneplus.net/oneplus-x-tempered-glass-screen-protector
I ordered 2 of them, already have the phone so hope the shipping will not be too slow. I'll tell you when I get them.
fuske said:
I ordered the original temepered glass screenprotector with my OnePlus X and I'm really disappointed about it. I want to know if anyone else has the same issue.
There's still air all around the edges. Really regret peeling of the plastic protector that comes pre-installed .
Wanted to order a Orzly one but they pulled it out of the website( maybe the same problems??)
Noticed this on the Nillkin site: "Because the phone has posted under arc, film after about a slight white border, is normally" .....
Is there or will there be a better one, or has anyone good experience with this type of protectors on curved screens?
Here's a picture of the original protector installed
Click to expand...
Click to collapse
You better use film rather than tgsp with such curved screen.
My father has the same problem with Note4 - edges of tempered glass is not round but straight, and screen is slightly round on the edges. I also planed to buy glass protector for my OPX but now i see that is not so good idea. I better wait for some hard case and i will live that original screen protector and i wish you well, maybe there will be curved tempered glass for our phones... who knows...
I ordered a similar one off Ebay. The same happened to me. I'm pretty good at applying screen protectors. There is air all around the edges. I bought a similar one for my wifes S5 and that went on perfect you can't even tell it's on. I'm sticking with it as the glass ones have saved my skin on other phones more than once.
Sent from my ONE E1003 using XDA Free mobile app
cxm0429 said:
You better use film rather than tgsp with such curved screen.
Click to expand...
Click to collapse
For the looks maybe but a tgsp protects the screen much more!
I also ordered the NILLKIN, because I wasnt happy with the original one. I ordered the H + with rounded edges.
It was delivered today and was going to hesitate to go try this, eventually just went ahead and tried under the guise, "it can not be worse!"
I came to the conclusion that it was exactly the same size so probably had the same problem as the original.
And that was true, unfortunately, ...
So NILLKIN has the same problem as the original of OnePlus!
But!...
In contrast to the original is the NILLKIN H + rounded off at the edges so that feels better. Something also bothered me!
Conclusion, this is one better than the original! (Imho)
Someone on OP forums speaked about Sundatom Tempered Glass 9H 0.2mm 2.5D arc edge
One more to test....
2.5D means that only the edges of glass are rounded I don't think this cover whole screen (I hope I'm wrong)
Dizzyrul3z said:
2.5D means that only the edges of glass are rounded I don't think this cover whole screen (I hope I'm wrong)
Click to expand...
Click to collapse
Did you read what's in the image i posted :
"glass curved down the screen side"
This one pretend to be what i'm waiting for. Maybe I'll try it after a chinese tester confirm that.
do any one bought from ebay?? www.ebay.com/itm/Tempered-Glass-Thi...987978?hash=item3d08767cca:g:Rs0AAOSwYHxWQG~P
Kéno40 said:
Someone on OP forums speaked about Sundatom Tempered Glass 9H 0.2mm 2.5D arc edge
One more to test....
Click to expand...
Click to collapse
I ordered the one mentioned above to test. Its only a couple of dollar..
Kéno40 said:
Did you read what's in the image i posted :
"glass curved down the screen side"
This one pretend to be what i'm waiting for. Maybe I'll try it after a chinese tester confirm that.
Click to expand...
Click to collapse
Yes I read that but a few times I met with the auction description was not as same as the item that I got.
fuske said:
I ordered the one mentioned above to test. Its only a couple of dollar..
Click to expand...
Click to collapse
Can you add a link ? Couldn't find it on web.
Related
Hi guys so the screen protector hunt starts again ive been looking on amazon uk and some of them seem to be a full adhesive fit does anyone know if the xz2 has flat glass near the main display or is it 2.5D like most models
hear is one ive been looking at https://www.amazon.co.uk/Protector-...6&sr=8-7&keywords=xperia+xz2+screen+protector
On the same hunt, the glass is definitely 2.5D. I wouldn't expect any full adhesive glass protectors to work without massive halo's.
Goronok said:
On the same hunt, the glass is definitely 2.5D. I wouldn't expect any full adhesive glass protectors to work without massive halo's.
Click to expand...
Click to collapse
nightmare isnt it ive had loads of phones lately and everyone has been rubbish id be happy with a good film protector along as its crystal clear but even them seem to have a snowy effect
the Girlfriends iphone 8 plus is the last decent protector ive seen
I’ve ordered
Beyeah??
Will give you an update once I get the phone! Got to wait until 5th April! ?
well just received my xz2 and tired these https://www.amazon.co.uk/Newzerol-D...7&sr=1-8&keywords=xperia+xz2+screen+protector
there okish nice and clear but dont fit too well and at the top and bottom the dont seem to be sticking all too well
anyone had any luck with any more?
thanks
I buy iVoler tempered glass from amazon ita, are warranty life...when will arrive i'll check the description
Edit: iVoler tempered glass for xz2 are very bad, halo in all 4 sides
Zazzinho said:
I buy iVoler tempered glass from amazon ita, are warranty life...when will arrive i'll check the description
Edit: iVoler tempered glass for xz2 are very bad, halo in all 4 sides
Click to expand...
Click to collapse
I bought these
https://www.amazon.co.uk/dp/B07BHLGSBT/ref=cm_sw_r_sms_apa_QVp0Ab7M39G0D
Fitted nice and stuck quite well and no halo till you touch the display then hallo everywhere but they gradually disappear once left alone
God I hate the whole screen protector problems the gf has a iPhone 8 plus bought one went on full adhesive not problems looks crystal clear :crying:
brockyneo said:
I bought these
https://www.amazon.co.uk/dp/B07BHLGSBT/ref=cm_sw_r_sms_apa_QVp0Ab7M39G0D
Fitted nice and stuck quite well and no halo till you touch the display then hallo everywhere but they gradually disappear once left alone
God I hate the whole screen protector problems the gf has a iPhone 8 plus bought one went on full adhesive not problems looks crystal clear :crying:
Click to expand...
Click to collapse
1 hour ago i've seen the brotect airglass, how are this screen protector?
Edit: finally today it's arrived brotect airglass, first time i've buyed and it's arrived a back screen protector for s9+ in xz2 package (???), contact the support and they send me a new for free and it's arrived today...no halo, great brightness and very good oleophobic treatment
i think they all seems to be lying on us... they advertise it as a 3D or full cover edge to edge but when you get your hands on it you realize it only protects the LCD, like flat protector...
well, i like this by IMAK... it's a 3D and full edge to edge film rather than tempered glass... what i don't like about it is not glossy, but rather anti-glare which i hate.
check the link below if anyone is interested in buying it
https://www.ebay.com/itm/For-Sony-X...var=552691546263&_trksid=p2055119.m1438.l2649
I bought this one, fits edge to edge very well.
https://www.amazon.co.uk/dp/B07B3XGHDV/ref=cm_sw_r_em_apa_i_ZWe8AbT6KPEVK
brockyneo said:
Hi guys so the screen protector hunt starts again ive been looking on amazon uk and some of them seem to be a full adhesive fit does anyone know if the xz2 has flat glass near the main display or is it 2.5D like most models
hear is one ive been looking at https://www.amazon.co.uk/Protector-...6&sr=8-7&keywords=xperia+xz2+screen+protector
Click to expand...
Click to collapse
this should look amazing, also it does protects the sides....
take a look
https://www.ebay.com/itm/Xperia-XZ2...-Full-Coverage-3Pack-Clear-Flim-/302707711634
here is the perfect case that match it
https://www.ebay.com/itm/Sony-Xperi...&itm=601568981187&_trksid=p5411.c100167.m2940
Does plastic screen protector protects your phone from falls and prevents shattering like the glass ones?
I bought this one but was rubbish bad rainbow affect and started coming off withing a week https://www.amazon.co.uk/dp/B07BHLGSBT/ref=cm_sw_r_sms_apa_i_5VY8Ab1MD67AR
But bought this one https://www.amazon.co.uk/dp/B07BPRBRPT?ref=yo_pop_ma_swf
Works perfect crystal clear and stuck well at the edges been 2 weeks and still looks new and case friendly
AlvinZahran98 said:
Does plastic screen protectors protect your phone from fall and prevents shattering like the glass ones?
Click to expand...
Click to collapse
It prevents glass breaking by 30%.
Or was it 70%?
But it definitely strengths the glass structure.
MartinX3 said:
It prevents glass breaking by 30%.
Or was it 70%?
But it definitely strengths the glass structure.
Click to expand...
Click to collapse
So it is safe to use, as safe as when I use a glass screen protector?
AlvinZahran98 said:
So it is safe to use, as safe as when I use a glass screen protector?
Click to expand...
Click to collapse
I prefer a thick glass screen protector.
It will easily avoid bubbles and is way stronger.
MartinX3 said:
I prefer a thick glass screen protector.
It will easily avoid bubbles and is way stronger.
Click to expand...
Click to collapse
Okay, I always use a glass screen protector too. But, it is a nightmare to find a good glass screen protectors for this phone.
AlvinZahran98 said:
Okay, I always use a glass screen protector too. But, it is a nightmare to find a good glass screen protectors for this phone.
Click to expand...
Click to collapse
I use this one.
I hope you like it.
https://www.wigento.de/smartphone/s...sony-xperia-xz2-schutz-huelle-neu/a-42519990/
I recommend this:
https://www.gadgetshieldz.com/sony-xperia-xz2-screen-protectors-cases-covers-skins.html
Fits perfectly and the smoothness is like glass!
Dont buy this particular type of glass on aliexpress (this is my first bad buy here, others that i ordered for diferent models were worth it) it seems to be problem with this one... i have bad connection in middle of screen 3 cm vertikal (no air bubble, just pad materials on protective glass
https://www.dropbox.com/s/yxu55ssg7vig4xi/Screenshot_20180618-075151.png?dl=0
Could someone please recommend a good glass screen protector?
Thank you in advance!
Push, i am also looking for a good temp glass.
Anyone has experiences with good temp glass and would recommend it?
Gesendet von meinem EVR-AL00 mit Tapatalk
torr310 said:
Could someone please recommend a good glass screen protector?
Thank you in advance!
Click to expand...
Click to collapse
Nillkin Amazing H+ Pro tempered glass screen protector for Huawei Mate 20 X
I am using it on my mate 20X now. As usual, nillkin produces good quality glass screen protector at a reasonable price
nitric75 said:
Nillkin Amazing H+ Pro tempered glass screen protector for Huawei Mate 20 X
I am using it on my mate 20X now. As usual, nillkin produces good quality glass screen protector at a reasonable price
Click to expand...
Click to collapse
Thank you for the recommendation!
I ordered a Whitestone type liguid adhere temp glass protector from Ali, it should arrive in the next few days.
https://goo.gl/SGmrK2
SWBgHz said:
I ordered a Whitestone type liguid adhere temp glass protector from Ali, it should arrive in the next few days.
https://goo.gl/SGmrK2
Click to expand...
Click to collapse
I am not sure what whitestone means. Thank you for the link! Could you please let me know how it feels upon receipt?
SWBgHz said:
I ordered a Whitestone type liguid adhere temp glass protector from Ali, it should arrive in the next few days.
https://goo.gl/SGmrK2
Click to expand...
Click to collapse
Why would you need this if screen isn't curved? I have a Pixel 2 XL. And liquid adhesive is a expensive and a pain to install.
Tempered glass
Is the Nilkins tempered glass compatible with the clear case provided in the box?
I have installed 2 tempered glass and both will have air bubles when used together with clear case provided in the box
2nd question, anybody has experience using screen protector clearplex or X-one?
why guys need screen protector i use the protector comes with phone or im wrong there is one come with phone just remove number 2 sticker ?? plz tell me that also screen protector
barcaloney10 said:
why guys need screen protector i use the protector comes with phone or im wrong there is one come with phone just remove number 2 sticker ?? plz tell me that also screen protector
Click to expand...
Click to collapse
That is a plastic screen protector, most people install glass to protect their phone.
hattrickho said:
That is a plastic screen protector, most people install glass to protect their phone.
Click to expand...
Click to collapse
so its better to remove it and install glass ? or i can install over it ?
barcaloney10 said:
so its better to remove it and install glass ? or i can install over it ?
Click to expand...
Click to collapse
I removed mine to install glass. Better protection.
Yea! You can install glass over it. I did it on my first glass screen protector but the screen is not as clear to install glass alone.
torr310 said:
I am not sure what whitestone means. Thank you for the link! Could you please let me know how it feels upon receipt?
Click to expand...
Click to collapse
Order screwed up and never arrived, think the seller just didn't know how to send to US.
def-g said:
Why would you need this if screen isn't curved? I have a Pixel 2 XL. And liquid adhesive is a expensive and a pain to install.
Click to expand...
Click to collapse
Expensive, yes. I find easy to install though and while it has more steps it is far easier to get a perfect type fit, in the end. Regular temp glass lifts off, gets stuff under the edges, and is prone to that oil slick effect - the liquid adhere types solve those issues and aside from better fit/feel they last longer.
Hmm seeing as the Mate 20X screen is mostly flat and a little curve at the extreme edge (similar to iphones), is there any decent full coverage (those with the black borders) tempered glass for it?
I've seen a few at the shops but when i test fit them over my screen i can see that the black border covers some of the pixels of the screen, making it look like "surrounded" or "covered". like if you were to view an old website (where they put absolutely no padding at all) the left and the right side of the text will be cut off (Eg, the first letter "A", probably the left leg will be cut off)
This is also a problem I noticed with my iPhone X, most full coverage tempered glass being sold have their black borders a little too thick and will "eat" into the screen when applied, so far the only tempered glass i know of that has black borders and not exhibit this issue is the one by spigen (google for pics), their black border is thin enough that it does not interfere with the screen.
Wondering if such a product exists for the Mate 20 X?
I have the black border Tempered Glass on my Mate 20 X and also i have used these black borders Tempered glass for my Xiaomi Mi Mix 18K. Yes, it is true, they ,, eat '' a little bit from the screen edges, but i would rather prefer these and have a full coverage rather than the crystal clear ones and have the screen protected like 90%... as those dosen't fit on the entire screen. I don't mind at all the borders... it's only about 2mm , barely notice in everyday use...
So, if you guys want to have full coverage and full protection for the screen, goes for the black borders tempered glass... my honest opinion...
filip_pine said:
I have the black border Tempered Glass on my Mate 20 X and also i have used these black borders Tempered glass for my Xiaomi Mi Mix 18K. Yes, it is true, they ,, eat '' a little bit from the screen edges, but i would rather prefer these and have a full coverage rather than the crystal clear ones and have the screen protected like 90%... as those dosen't fit on the entire screen. I don't mind at all the borders... it's only about 2mm , barely notice in everyday use...
So, if you guys want to have full coverage and full protection for the screen, goes for the black borders tempered glass... my honest opinion...
Click to expand...
Click to collapse
Those only have adhesive around the edges correct? Dot matrix and some rainbow effect, no?
Sent from my HUAWEI EVR-AL00 using XDA Labs
I've currently found one (google hoda mate 20 x tempered glass, I can't post links), 1st or second result, the black borders seem to be rather thinner, might want to order one to test but its about $20
def-g said:
Those only have adhesive around the edges correct? Dot matrix and some rainbow effect, no?
Click to expand...
Click to collapse
That's true, rainbow effect and matrix, but i don't mind at all, is better to protect the entire screen rather than just 90% of the surface...
The matrix and rainbow effect is visible only with the screen off, with the screen turned on you can't see these effects...
I would still love to find a Whitestone type adhesive temp glass protector if anyone comes across a good one they would recommend.
SWBgHz said:
I would still love to find a Whitestone type adhesive temp glass protector if anyone comes across a good one they would recommend.
Click to expand...
Click to collapse
You could grab those black border style adhesive at sides type tempered glass and convert it to those full loca glue type, just strip away all the extra film and leave it with the bare glass, then just get those spare glue tubes used in whitestone and apply it yourself, i did the same thing with my XZ2 Compact seeing no one sells a whitestone type full coverage protector so i did it myself
But for now, I am quite happy with my Nillkin H+ tempered glass (especially coming from me, since i am the type that normally prefers those full coverage full adhesive types), yes, it does not go all the way to the edge but as i'm using it with the provided huawei TPU case it fits just fine, more important is to protect the screen and get back that "glass" touch.
Which screen protector are you using (if any) ?
I've just come across this one:
https://www.amazingat.com/product-page/2-5d-full-glass-for-huawei-mate-20x
Case friendly too apparently
What do you guys think !
Still rocking the original screen protector from the factory. In search of the perfect glass protector though.
I'm using Nilkin HD+. Good finger print smudge protection. Case friendly. Only negative is is cut short. About 1 mm gap around. Slight rainbow effect on sides. Good for $10.
G
Sent from my HUAWEI EVR-AL00 using XDA Labs
I'm not a fan of glass ones so I ordered oem quality ones here. If you like the original protector you'll like these.
https://www.ebay.com/itm/5-PCS-Clear-Matte-Screen-Protector-Guard-Film-Cover-for-Huawei-Mate-20-X-/253942475084?varId=553260319286&txnId=2390286351015
ajsmsg78 said:
I'm not a fan of glass ones so I ordered oem quality ones here. If you like the original protector you'll like these.
https://www.ebay.com/itm/5-PCS-Clear-Matte-Screen-Protector-Guard-Film-Cover-for-Huawei-Mate-20-X-/253942475084?varId=553260319286&txnId=2390286351015
Click to expand...
Click to collapse
The problem is, the film ones don't protect against much. It will protect against light scratches and that's pretty much it.
The glass screen protects against light and heavy scratches and it also protects against screen breaks.
ThaDraGun said:
The problem is, the film ones don't protect against much. It will protect against light scratches and that's pretty much it.
The glass screen protects against light and heavy scratches and it also protects against screen breaks.
Click to expand...
Click to collapse
A Flip case protects the rest.
If there was a matte glass protector, that would be awesome.
Sent from my HWEVR using XDA Labs
ThaDraGun said:
The problem is, the film ones don't protect against much. It will protect against light scratches and that's pretty much it.
The glass screen protects against light and heavy scratches and it also protects against screen breaks.
Click to expand...
Click to collapse
I've never scratched a screen that had a pet film protector on it. The only thing I care about are the scratches. Most of the time when you drop your phone it lands on one of the corners so it doesn't matter if you have a glass protector on or not. I hate the extra thickness of the glass ones and I hate that they crack way too easily. I'd rather spend $1.50 on protectors than $5 or $10 for each one and then have them crack a week or two later.
SlyUK said:
Which screen protector are you using (if any) ?
I've just come across this one:
https://www.amazingat.com/product-page/2-5d-full-glass-for-huawei-mate-20x
Case friendly too apparently
What do you guys think !
Click to expand...
Click to collapse
wow, I wish i would've found this before I ordered mine. Unfortunately, it's sold out.... :crying::crying::crying::crying::crying:
I bought the Nillkin Amazing XD CP+ Max tempered glass screen protector for Huawei Mate 20 X
and the fitment was quite bad. Link to my post about my thoughts on it
Is there anywhere else I can buy this screen protector? this seems like the best full coverage screen protector yet.
_sC said:
Is there anywhere else I can buy this screen protector? this seems like the best full coverage screen protector yet.
Click to expand...
Click to collapse
This seems to be the same... you have to buy it and see if it's full coverage or not... ask the seller first. Cheers
https://www.aliexpress.com/item/10P...f0-445f-9ea1-a00a26e0216d&transAbTest=ae803_5
filip_pine said:
This seems to be the same... you have to buy it and see if it's full coverage or not... ask the seller first. Cheers
https://www.aliexpress.com/item/10P...f0-445f-9ea1-a00a26e0216d&transAbTest=ae803_5
Click to expand...
Click to collapse
thank you very much for taking the time to find it.
appreciate it
I think I've only seen one of them on Amazon so far (this one). It looks like it might be fine - but I'm not sure $36 is where I want to be. I'm hoping we'll see some more options pop up soon.
Anyone seen anything else yet?
I'm really thinking I want something on there considering that the Flex Mode will basically be resting on the screen side whenever you use it (or you'd get a wobble on the cameras).
Whitestone just came out with one on their website.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
ninja4hire said:
Whitestone just came out with one on their website.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
Click to expand...
Click to collapse
Thanks, just purchased with the discount code Newproduct20. It was $36. I love it on my Note 10, so I'll give it a try.
So I’m assuming the stock screen protector has to be removed for the Whitestone?
The outside screen protector is no problem. It's the inner one they caution against removing.
StormCell said:
The outside screen protector is no problem. It's the inner one they caution against removing.
Click to expand...
Click to collapse
I chickened out. I cancelled the Whitestone one. I will leave it as is for a while. The Whitestone install video looks pretty complicated. I will see other reviews first. Feel like if I take off the pre installed one I might be sorry.
That video is pretty intense.
I see Verizon has a screen protector. I hope a better quality one becomes available.
lynseyw said:
I chickened out. I cancelled the Whitestone one. I will leave it as is for a while. The Whitestone install video looks pretty complicated. I will see other reviews first. Feel like if I take off the pre installed one I might be sorry.
Click to expand...
Click to collapse
If it has a factory installed protector on it, leave it on until it wears out. They provide better protection than you might first think.
Ha-ha I "tested" the one on my 10+ the 2and day I had it and faceplanted it on a rough piece of 1/16th inch aluminum angled upwards.
Marred the protector but no damage to the screen... it hit on the curved glass area, hard.
Sand will scratch these screens.
I would lean towards a wet apply urethane screen protector as they are durable, remain clear, fairly easy to apply, bubble free, self healing and are inexpensive.
Been having a good run with Gorilla IQ Sheild on my 10+. Bought 4 three months ago and still on the first one. Shows some wear on the keypad area but no scratches and I'm not babying it. Similar in feel to the factory installed protector.
ninja4hire said:
Whitestone just came out with one on their website.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
Click to expand...
Click to collapse
Do you know if this is necessary on the fold 2? The only reason I buy whitestone tempered glass for my samsung phones is because the screen is curved and whitestone makes the best glass for curved screens. If the z Fold 2 doesn't have a curved front screen, then I think most tempered glass screen protectors should work.
So I guess my main question is, does the z fold 2 have a curve to the front screen?
lynseyw said:
Thanks, just purchased with the discount code Newproduct20. It was $36. I love it on my Note 10, so I'll give it a try.
Click to expand...
Click to collapse
The screen protector is for the outer screen, you dont need a protector for inside screen. Whitestone is a good company, sadly the code did not work for me. Did anyone get lucky yet?
mmafighter077 said:
Do you know if this is necessary on the fold 2? The only reason I buy whitestone tempered glass for my samsung phones is because the screen is curved and whitestone makes the best glass for curved screens. If the z Fold 2 doesn't have a curved front screen, then I think most tempered glass screen protectors should work.
So I guess my main question is, does the z fold 2 have a curve to the front screen?
Click to expand...
Click to collapse
Sorry just saw your question. Yes the z Fold 2 has one side of the front screen slightly curved. The side that opens to be specific.
Whitestone code no longer works. As soon as people started using it they yanked it.
Anyone using the Whitestone protector? They're sold out.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
StormCell said:
Anyone using the Whitestone protector? They're sold out.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
Click to expand...
Click to collapse
Its great.. need to get a front cover thouvh..
blkghost22 said:
Its great.. need to get a front cover thouvh..
Click to expand...
Click to collapse
Still need a cover with the screen protector?
StormCell said:
Still need a cover with the screen protector?
Click to expand...
Click to collapse
Because of the edges of the glass. I can feel the edges when playing games
Just received the Whitestone screen protector and installed it. It lined up perfectly with the hole punch camera, but doesn't quite cover the entire front glass. Had no adhesive dribble out on to my phone. But, did have to move the holder around to get the adhesive to fully disperse. I'm now just hoping that the first case I put on (when one of the five I ordered arrives), doesn't break the screen protector.
CP Conductor said:
Just received the Whitestone screen protector and installed it. It lined up perfectly with the hole punch camera, but doesn't quite cover the entire front glass. Had no adhesive dribble out on to my phone. But, did have to move the holder around to get the adhesive to fully disperse. I'm now just hoping that the first case I put on (when one of the five I ordered arrives), doesn't break the screen protector.
Click to expand...
Click to collapse
Mines on the way. Pic, please
Does anyone know if any of the screen protectors on this link are actually glass, and if they are any good ? Thanks.
protectionfilms24.com/c/tempered-glass-screen-protectors/samsung-galaxy-z-fold-2/
Hi All just thinking is this screen protector any good
Whitestone Dome Glass Galaxy Z Fold 4 Tempered Glass Screen Protector 2Pack | eBay
Find many great new & used options and get the best deals for Whitestone Dome Glass Galaxy Z Fold 4 Tempered Glass Screen Protector 2Pack at the best online prices at eBay!
www.ebay.com.au
I will be getting this spigen case also so i am hoping it will fit https://www.spigen.com/collections/...fold-3-case-thin-fit-p?variant=39982755643439
I would assume i take off the pre installed screen protector first
Thanks
Yes of course you would take off the screen protector. Haven't tried the spigen, but those whitestone are good for $10
Sonin66 said:
Yes of course you would take off the screen protector. Haven't tried the spigen, but those whitestone are good for $10
Click to expand...
Click to collapse
Do you think it will fit with the spigen case with no issues?
Android Noobie said:
Do you think it will fit with the spigen case with no issues?
Click to expand...
Click to collapse
Mine fits samsung silicone just fine. Just line it up with your camera cut out. I'd imagine it would fit
I ordered the whitestone dome TG to use with the ringke slim and it looks like its either going to be a very tight fit or it wont fit. I dont want to attempt to fit it as il be returning it to amazon
Anyone find a good glass screen protector for the front?
The whitestone ones are not that great. Im going to try with a Hydrogel version
I have been using hydrogel and it's great. I even scratched the screen protector with a tool at work. I thought I had to replace it but a day later it's as good as new. I am very surprised at the self healing.
Techvir said:
I have been using hydrogel and it's great. I even scratched the screen protector with a tool at work. I thought I had to replace it but a day later it's as good as new. I am very surprised at the self healing.
Click to expand...
Click to collapse
can you link the one you are using. Thanks
I think all the hydrogel are the same.
I got it from Aliexpress as it was not available anywhere else at a that time.
This is the specific one I got
9D Soft TPU Hydrogel Film For Samsung Galaxy
https://a.aliexpress.com/_mPJLW7U
Got a long scratch on the front screen protector. Drove me insane. Just ordered some hydrogel ones.
Anyone have the Samsung carbon case with this screen protector?
Android Noobie said:
Hi All just thinking is this screen protector any good
Whitestone Dome Glass Galaxy Z Fold 4 Tempered Glass Screen Protector 2Pack | eBay
Find many great new & used options and get the best deals for Whitestone Dome Glass Galaxy Z Fold 4 Tempered Glass Screen Protector 2Pack at the best online prices at eBay!
www.ebay.com.au
I will be getting this spigen case also so i am hoping it will fit https://www.spigen.com/collections/...fold-3-case-thin-fit-p?variant=39982755643439
I would assume i take off the pre installed screen protector first
Thanks
Click to expand...
Click to collapse
I am using the Spigen Glas with the Spigen Slim Fit P case and it is sized to fit nicely inside the front raised edges. I really like it for use with Spigen cases. Not sure how it will look with other cases with thinner edged front protectors.
My front and main screen protectors started developing small scratches. I'm too OCD to let that slide so I removed both of them. Much happier now, lol.
chetly968 said:
My front and main screen protectors started developing small scratches. I'm too OCD to let that slide so I removed both of them. Much happier now, lol.
Click to expand...
Click to collapse
Do you feel a difference in the inner screen now?
Anyone going with no screen protector on the front? I had 2 of the ones in the first post in this thread but messed them both when I tried to install them. Was thinking about just going without one and was wondering if anyone else was as well?
I'm thinking about going without one too.
pside15 said:
Anyone going with no screen protector on the front? I had 2 of the ones in the first post in this thread but messed them both when I tried to install them. Was thinking about just going without one and was wondering if anyone else was as well?
Click to expand...
Click to collapse
I removed the front screen protector on day 1.
truckerdewd said:
I removed the front screen protector on day 1.
Click to expand...
Click to collapse
So I'm guessing the Victus Gorilla Glass on this phone is holding up well for you as far as scratches go?
pside15 said:
So I'm guessing the Victus Gorilla Glass on this phone is holding up well for you as far as scratches go?
Click to expand...
Click to collapse
No scratches on the front screen. I have in a Spigen Slim Armor Pro case.