Develop Bugs

[Q] Moto X Screen Protectors ?

Hello Folks,
I know there are loads of screen protector threads out there but none of them are recent for the MotoX.
I have had an XtremeGuard Protector on my X for a few months, but the gummyness, orange peel and lack of screen sensitivity is killing me.
What are some good current options that are $15 or under ?
Thanks,
Pete

I'm currently using the SUPCASE Screen protector that came with my case: has everything I need to get it on once and only once(even comes with a lint remover film). Looks and feel great. I don't know what you mean by 'gummyness though, the only screen protector I would describe that has a gummy-like feel(especially when I pinch with my fingernail is the Skinomi brands.

pasta1234 said:
Hello Folks,
I know there are loads of screen protector threads out there but none of them are recent for the MotoX.
I have had an XtremeGuard Protector on my X for a few months, but the gummyness, orange peel and lack of screen sensitivity is killing me.
What are some good current options that are $15 or under ?
Thanks,
Pete
Click to expand...
Click to collapse
I am using this: http://www.amazon.com/gp/product/B00EVWX5VO/ref=oh_details_o01_s01_i01?ie=UTF8&psc=1
and like it. If you get it - start applying from the bottom of the phone (near USB connector) because the cutout for microphone is small and more precision is required there than on top.

Thank you for the suggestions folks
What about the glass ones i hear people talking about, what are there advantages ?
Pete

JoeSchmoe007 said:
I am using this: http://www.amazon.com/gp/product/B00EVWX5VO/ref=oh_details_o01_s01_i01?ie=UTF8&psc=1
and like it. If you get it - start applying from the bottom of the phone (near USB connector) because the cutout for microphone is small and more precision is required there than on top.
Click to expand...
Click to collapse
I'll second these. I had the ArmorSuit and it was terrible. These are cheap, durable and don't negatively affect the screen.I've been using one for over 2 months and it still looks fine.

The screen protectors from Motorola are very good.

pasta1234 said:
Thank you for the suggestions folks
What about the glass ones i hear people talking about, what are there advantages ?
Pete
Click to expand...
Click to collapse
I bought a couple of the Mimeusa.com glass screen protectors, one for my wife and another for myself. Installed mine first, its a little different installing such a stiff protector, luckily i was able to lift it back up easily a couple times to adjust the positioning.
The wifes I installed a couple hours after, and it felt like it gave me more problems. didn't want to get positioned right, but eventually I got it lined up well.
The next day it fell off in her car while she was driving and got covered in dirt and dust on the adhesive side.
Mine is still on, after 2 weeks of use;
The texture is awesome! i hate most screen protectors, but this is glass and feels so good to the touch. you hardly notice its there.
It hasn't taken and scratches, and it does feel like fingerprints are less noticeable than on the bare screen.
I don't have a case of my X yet, ordered a bumper from amazon, but its not here yet.
I feel that the protector gathers small fibers easily at the edge. there are a couple of very small fibers that have worked there way just under the edge of the glass. They are hardly noticeable, especially when the screen is on.
I have not seen any new accumulation since the first few days, so maybe its more prone to catching the fibers in the hours / day after installation. I would advise avoiding pockets for 24 hours after installing this product if you can.
I will probably use this screen protector until it chips/breaks/gets too scratched up, and then go naked screen for the rest of the phones life.

If you are intending to spend $15 for a screen protector, might as well get a tempered glass one. I'm using this one: http://www.amazon.com/i-Blason-Motorola-Ultra-Thin-Tempered-Protector/dp/B00E0CUP18/
If you installed it correctly the first time, it should stay stuck and without any bubbles.

pasta1234 said:
Thank you for the suggestions folks
What about the glass ones i hear people talking about, what are there advantages ?
Pete
Click to expand...
Click to collapse
Do you Google?

eksasol said:
If you are intending to spend $15 for a screen protector, might as well get a tempered glass one. I'm using this one: http://www.amazon.com/i-Blason-Motorola-Ultra-Thin-Tempered-Protector/dp/B00E0CUP18/
If you installed it correctly the first time, it should stay stuck and without any bubbles.
Click to expand...
Click to collapse
That's very expansible for me i think...

I appreciate everyone help...
For those who have the glass protectors, do u feel they are worth the extra money compared to a good clear protector like the halo ? Do they cause interference with cases ?
What do u mean expansible sumonmolla ?
Pete

pasta1234 said:
Hello Folks,
I know there are loads of screen protector threads out there but none of them are recent for the MotoX.
I have had an XtremeGuard Protector on my X for a few months, but the gummyness, orange peel and lack of screen sensitivity is killing me.
What are some good current options that are $15 or under ?
Thanks,
Pete
Click to expand...
Click to collapse
I would just like to throw out my support for Liquid Armor. I use it on all of my touchscreen devices, and have never had a scratch on a screen since, and it feels just like glass, without anything on it. The best part is that the one bottle can be used for several screens. Though if you don't use it in a couple months, the stuff will harden in the nozzle of the bottle, making it more difficult to use.
Edit: figured Id throw in a link. http://www.amazon.com/Dynaflo-LIQUID-ARMOR-Universal-Microfiber-DYN-LA100SP/dp/B007EZ3EM0

Wingdom said:
I would just like to throw out my support for Liquid Armor. I use it on all of my touchscreen devices, and have never had a scratch on a screen since, and it feels just like glass, without anything on it. The best part is that the one bottle can be used for several screens. Though if you don't use it in a couple months, the stuff will harden in the nozzle of the bottle, making it more difficult to use.
Edit: figured Id throw in a link. http://www.amazon.com/Dynaflo-LIQUID-ARMOR-Universal-Microfiber-DYN-LA100SP/dp/B007EZ3EM0
Click to expand...
Click to collapse
+1 on this stuff. Been using it on my last 5 phones in the family. Especially great since the wife and I usually are yearly on replacement devices
Sent from my XT1053 using Tapatalk

Disclaimer: I posted this in a couple other threads, but I wanted to try and post it where I know we've been discussing tempered glass screen protectors.
Here's some pictures of the redesigned i-Blason protector. As you can see, there is now a cutout for the proximity sensor. The corners also fit the Moto X perfectly (their old design fit perfectly too). Very happy I finally have a protector that FITS and where the proximity sensor won't be blocked! I liked the i-Blason until I had started having proximity sensor issues because I had dropped it several times, and it never once cracked, unlike the MIME, which cracked the very first time I dropped it.

pasta1234 said:
I appreciate everyone help...
For those who have the glass protectors, do u feel they are worth the extra money compared to a good clear protector like the halo ? Do they cause interference with cases ?
What do u mean expansible sumonmolla ?
Pete
Click to expand...
Click to collapse
i have tempered glass on my moto X ( mimeusa.com/product/moto-x-ghost-glass-screen-protector/ ) since january.
it was very easy to install and the feel is wonderful. my only complaint is that when you drop your phone, it can crack. better a crack on the protector than a scratch on the device, right? my phone has been pretty suicidal lately, what w/ jumping off tables, so it has accumulated many cracks on the protector. i am replacing it (with same ghost glass) and also buying a bumper case ... that may make a difference in the life span of the protector.
this is my first glass protector and yes i like it. on previous devices i used zagg screen protectors and was VERY HAPPY with them, but when i ordered their protector for the moto X, i found that they must have screwed up on the device specs, as the film didn't even cover the entire viewing screen. UNACCEPTABLE! i will not go back to their products.

I had the MIMEUSA and was very happy with the feel of the MIMEUSA, but it didn't fit properly. The corners were too squared and extended over the screen. The edges were also suppose to be beveled to prevent chipping but mine seemed like they were beveled out, leaving a lip on the glass. This all led to the edges chipping and eventually a larger break.
I ordered the i-Blason to try it and am very happy. The fit is perfect, its quite a bit thinner than the MIMEUSA, and it feels just as slick and smooth as the MIMEUSA and the glass screen. I would recommend the i-Blason over the MIMEUSA. And the i-Blason is only $17 on Amazon making it about the same price as the high quality plastic protectors.

James4.0 said:
The screen protectors from Motorola are very good.
Click to expand...
Click to collapse
+1. The Power Support protectors are very good. Their 15% off right now as well, till March 21st.

Gotta Be a Better Screen Protector . . .

This is my third one, and I don't care for it. Two Skinomi's, and a TG I loved, but it covered the notification light (top & bottom black borders).
Anybody found one that is perfect? Or, did vendors give-up on this phone?

iandmacdonald said:
This is my third one, and I don't care for it. Two Skinomi's, and a TG I loved, but it covered the notification light (top & bottom black borders).
Anybody found one that is perfect? Or, did vendors give-up on this phone?
Click to expand...
Click to collapse
My Verizon Tempered Glass Screen protector, which I installed back in May, has been perfect. It looks like you're from the U.S given you came from the Sprint M8 so you can pick one up locally. They have zero lifting and covers the entire visible screen, both horizontally and vertical. Highly recommend it.
Sent from my HTC6545LVW using Tapatalk

richii0207 said:
My Verizon Tempered Glass Screen protector, which I installed back in May, has been perfect. It looks like you're from the U.S given you came from the Sprint M8 so you can pick one up locally. They have zero lifting and covers the entire visible screen, both horizontally and vertical. Highly recommend it.
Click to expand...
Click to collapse
Well, I'll check it out. Thanks!

iandmacdonald said:
Well, I'll check it out. Thanks!
Click to expand...
Click to collapse
No problem! It's as thin, or even thinner than some plastic screen protectors too . Just thought I'd share because I've seen some thick ones
Sent from my HTC6545LVW using Tapatalk

You might also check the newer Orzly 2.5D ProFit tempered glass. I haven't personally tried it yet, but has great reviews, and if I decide to replace mine (which is currently just a cheaper tempered glass that does not go edge to edge), I will probably be getting the Orzly

I'm waiting to receive a Rhino Shield in the mail. I'm currently using an Inskin tempered glass protector. Not bad, but it doesn't go to the edges completely and the sides of the protector have a little bit of air underneath. Still works well thought. My phone fell in the gravel face first from my pocket, and there's not even a scratch, so at least it does the job.

Have also been looking for an edge to edge protector.. The orzly is right up there, however I have switched my capacitive buttons so I can't use it. Would look stupid. Still on the hunt.

anybody try the nanocoatings yet?

I'm impressed with the built in screen protector

I am more impressed with the built in screen protector after one week. I've tried film screen protectors before and they showed marks from the s.Pen this one doesn't (yet). And the fingerprint works fine. I know it doesn't help much if you drop the phone but helps re scratches. I've always found that the glass screen protectors eventually attract dust on the sides. Im also using the included case for now which too is not bad.. What's your thoughts.

magichoward said:
I am more impressed with the built in screen protector after one week. I've tried film screen protectors before and they showed marks from the s.Pen this one doesn't (yet). And the fingerprint works fine. I know it doesn't help much if you drop the phone but helps re scratches. I've always found that the glass screen protectors eventually attract dust on the sides. Im also using the included case for now which too is not bad.. What's your thoughts.
Click to expand...
Click to collapse
I thought it was excellent but mine had to marks underneath out of the box and I was worried that it was the actual display that was marked so I pulled it off and it was the actual screen protector that was marked,been a pain in the arse since getting a protector that is decent
Wish I never removed it :silly:

It would be nice if Samsung provided a service where a new screen protector can be reapplied when original one is worn out.

After a week mine is badly scratched.
Already looking at the options for a replacement, not too keen on tempered glass.
Sent from my SM-T835 using Tapatalk

Its quite nice but mine is scratched all over and I'm not rough on the phone at all. I'll probably just leave it on, scratches and all. I am not wasting money on a Dome or some Tempered Glass solution that is cheaper that isn't going to fit or work well.

I had the S10+ Which also came with a screen protector but I honestly think Samsung did something to improve it - the one that came on my Note 10+ seems better than on the S10+ I had.
For what it's worth, I also don't want to spend the money on Glass - and don't want one where I have to put liquid on the screen to get it to work -I never had any luck with those - BUT, there are some very good plastic screen protectors that work exceptionally well, are easy to install and will make a good alternative if you need to replace the one that came with the phone.
The One I found that I like best is the Otao Screen Protector on Amazon - https://www.amazon.com/OTAO-Protector-Coverage-Friendly-Anti-Bubble/dp/B07VHBNRJP/ref=sr_1_25?keywords=screen+protector+note+10+plus&qid=1567359663&s=gateway&sr=8-25
The Video they posted on amazon definitely helps you install it perfectly and it is very affordable - just over 7 bucks and you get two of them.
Looks good - works great - lasts a long time (It did on my S10+ and I am sure it will on my Note 10+ as well.
THere are others that are also good, but this is the one I found that I like the most. Good luck....

​
Semantics said:
Its quite nice but mine is scratched all over and I'm not rough on the phone at all. I'll probably just leave it on, scratches and all. I am not wasting money on a Dome or some Tempered Glass solution that is cheaper that isn't going to fit or work well.
Click to expand...
Click to collapse
This is the downside of in-screen sensors. I personally like matter screen protectors which don't show marks, fingerprints and look clean. I don't want to buy one for it to not be compatible with the sensor. Any info if matte screen protectors might work?

the glass ones dont work well with fingerprint sensor. I wouldn't waste your money! I bought a 360 deg case and it doesnt work on that either.
Shame sammy doesnt sell the one that came on the phone. Mine protector has a scratch on it already though I was on hols last week and it could've been sand so its saved the screen!

bonerp said:
the glass ones dont work well with fingerprint sensor. I wouldn't waste your money! I bought a 360 deg case and it doesnt work on that either.
Shame sammy doesnt sell the one that came on the phone. Mine protector has a scratch on it already though I was on hols last week and it could've been sand so its saved the screen!
Click to expand...
Click to collapse
Same, sand and s-view cover bad idea lol. Got fair few pits in the protection.

I do like the built-in screen protector but as other people have mentioned, mine already has scratches on it nothing deep or crazy but it works fine for now. I've pre-ordered a Whitestone Dome, though expensive, I have mastered the process to the point that I don't make a mess. I've been using them since my Note8 and have had no complaints. Hell, it's even protected my screen when I've dropped it face down. The Dome cracked but my screen underneath was intact. I am a bit concerned about the Fingerprint scanner since it's not the greatest at recognizing my fingerprint but ah well.

The tempered glass screen protectors DO NOT WORK !!!!I'm on my third one. The sensor does not pick up.....I may just rock it raw dawg!!

I'm typically not a screen protector sort of person, but it was a week before i even noticed that the note 10+ had one on it.. I'm so impressed i'm leaving it on.

Yeah, I'm staying too on this one untill I buy whitestone dome as always! Hope that it works on this phone too with spigen tough armour; s8, s9+, note 9 works withouth problems!
Sent from my SM-N970F using Tapatalk

raul6 said:
It would be nice if Samsung provided a service where a new screen protector can be reapplied when original one is worn out.
Click to expand...
Click to collapse
My son sent an email to Samsung, telling them that his screen protector for his S10+ was damaged after several months of use, and they sent him a replacement!

ShelW said:
My son sent an email to Samsung, telling them that his screen protector for his S10+ was damaged after several months of use, and they sent him a replacement!
Click to expand...
Click to collapse
Nice! What would be even better, I think, if they had a service where it would be applied for you too. So, the same factory fit feel.

I've been very impressed with the factory protector as well. Hardly noticeable that it is there.

If they would sell this for cheap i would buy like 10. They get scratch easily but is so clear, finger glide and doesnt leave fingerprint. They only problem would be installation since this plastic screen protectors are a paint to get a perfect installation

tl08newbie said:
The tempered glass screen protectors DO NOT WORK !!!!I'm on my third one. The sensor does not pick up.....I may just rock it raw dawg!!
Click to expand...
Click to collapse
SCREENKNIGHT is the answer. It works and it is great. and one of few that sticks to edge and goes well with a pen

ShelW said:
My son sent an email to Samsung, telling them that his screen protector for his S10+ was damaged after several months of use, and they sent him a replacement!
Click to expand...
Click to collapse
How did he got about this? Mine fell off my bed over night on literally the first night I had it and the screen protector did its job ?caught on the side of the bed and took a big scratch

Mine died after just over a week, loving the fingerprint reader since

Screen protectors for the outside screen?

I think I've only seen one of them on Amazon so far (this one). It looks like it might be fine - but I'm not sure $36 is where I want to be. I'm hoping we'll see some more options pop up soon.
Anyone seen anything else yet?
I'm really thinking I want something on there considering that the Flex Mode will basically be resting on the screen side whenever you use it (or you'd get a wobble on the cameras).

Whitestone just came out with one on their website.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector

ninja4hire said:
Whitestone just came out with one on their website.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
Click to expand...
Click to collapse
Thanks, just purchased with the discount code Newproduct20. It was $36. I love it on my Note 10, so I'll give it a try.

So I’m assuming the stock screen protector has to be removed for the Whitestone?

The outside screen protector is no problem. It's the inner one they caution against removing.

StormCell said:
The outside screen protector is no problem. It's the inner one they caution against removing.
Click to expand...
Click to collapse
I chickened out. I cancelled the Whitestone one. I will leave it as is for a while. The Whitestone install video looks pretty complicated. I will see other reviews first. Feel like if I take off the pre installed one I might be sorry.

That video is pretty intense.

I see Verizon has a screen protector. I hope a better quality one becomes available.

lynseyw said:
I chickened out. I cancelled the Whitestone one. I will leave it as is for a while. The Whitestone install video looks pretty complicated. I will see other reviews first. Feel like if I take off the pre installed one I might be sorry.
Click to expand...
Click to collapse
If it has a factory installed protector on it, leave it on until it wears out. They provide better protection than you might first think.
Ha-ha I "tested" the one on my 10+ the 2and day I had it and faceplanted it on a rough piece of 1/16th inch aluminum angled upwards.
Marred the protector but no damage to the screen... it hit on the curved glass area, hard.
Sand will scratch these screens.
I would lean towards a wet apply urethane screen protector as they are durable, remain clear, fairly easy to apply, bubble free, self healing and are inexpensive.
Been having a good run with Gorilla IQ Sheild on my 10+. Bought 4 three months ago and still on the first one. Shows some wear on the keypad area but no scratches and I'm not babying it. Similar in feel to the factory installed protector.

ninja4hire said:
Whitestone just came out with one on their website.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
Click to expand...
Click to collapse
Do you know if this is necessary on the fold 2? The only reason I buy whitestone tempered glass for my samsung phones is because the screen is curved and whitestone makes the best glass for curved screens. If the z Fold 2 doesn't have a curved front screen, then I think most tempered glass screen protectors should work.
So I guess my main question is, does the z fold 2 have a curve to the front screen?

lynseyw said:
Thanks, just purchased with the discount code Newproduct20. It was $36. I love it on my Note 10, so I'll give it a try.
Click to expand...
Click to collapse
The screen protector is for the outer screen, you dont need a protector for inside screen. Whitestone is a good company, sadly the code did not work for me. Did anyone get lucky yet?

mmafighter077 said:
Do you know if this is necessary on the fold 2? The only reason I buy whitestone tempered glass for my samsung phones is because the screen is curved and whitestone makes the best glass for curved screens. If the z Fold 2 doesn't have a curved front screen, then I think most tempered glass screen protectors should work.
So I guess my main question is, does the z fold 2 have a curve to the front screen?
Click to expand...
Click to collapse
Sorry just saw your question. Yes the z Fold 2 has one side of the front screen slightly curved. The side that opens to be specific.

Whitestone code no longer works. As soon as people started using it they yanked it.

Anyone using the Whitestone protector? They're sold out.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector

StormCell said:
Anyone using the Whitestone protector? They're sold out.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
Click to expand...
Click to collapse
Its great.. need to get a front cover thouvh..

blkghost22 said:
Its great.. need to get a front cover thouvh..
Click to expand...
Click to collapse
Still need a cover with the screen protector?

StormCell said:
Still need a cover with the screen protector?
Click to expand...
Click to collapse
Because of the edges of the glass. I can feel the edges when playing games

Just received the Whitestone screen protector and installed it. It lined up perfectly with the hole punch camera, but doesn't quite cover the entire front glass. Had no adhesive dribble out on to my phone. But, did have to move the holder around to get the adhesive to fully disperse. I'm now just hoping that the first case I put on (when one of the five I ordered arrives), doesn't break the screen protector.

CP Conductor said:
Just received the Whitestone screen protector and installed it. It lined up perfectly with the hole punch camera, but doesn't quite cover the entire front glass. Had no adhesive dribble out on to my phone. But, did have to move the holder around to get the adhesive to fully disperse. I'm now just hoping that the first case I put on (when one of the five I ordered arrives), doesn't break the screen protector.
Click to expand...
Click to collapse
Mines on the way. Pic, please

Does anyone know if any of the screen protectors on this link are actually glass, and if they are any good ? Thanks.
protectionfilms24.com/c/tempered-glass-screen-protectors/samsung-galaxy-z-fold-2/

Question Query on screen protectors

There were replacement screen protectors for the main screen of the Z Fold2. I noticed Whitestone and other companies are advertising screen protectors for the Fold3. I assume these would be applied on the main screen directly as the Fold3 does not have a Samsung installed protector?
Also any recommendations for the front screen?

I believe the internal has a preinstalled screen protector. Same as the fold 2.
I was unable to get information if the exterior one has a screen protector or not.
I would think so since it seems normal for samsung now.

xile6 said:
I believe the internal has a preinstalled screen protector. Same as the fold 2.
I was unable to get information if the exterior one has a screen protector or not.
I would think so since it seems normal for samsung now.
Click to expand...
Click to collapse
Idk I tried out the phone in store, and this iteration of the fold felt more like glass and less like plastic and I didn't see a noticeable screen protector like the Fold 2.

Thinking about getting Ferilinso Designed for Samsung Galaxy Z Fold 3 5G Flexible TPU Screen Protector. Just a precaution, rather safe than sorry.

Fatmonk8 said:
Idk I tried out the phone in store, and this iteration of the fold felt more like glass and less like plastic and I didn't see a noticeable screen protector like the Fold 2.
Click to expand...
Click to collapse
They did say thicker protector and its tpu i believe.
I had screen protectors that feel "like glass" vs cheap plastic before.
Either way all a step in the right direction

xile6 said:
They did say thicker protector and its tpu i believe.
I had screen protectors that feel "like glass" vs cheap plastic before.
Either way all a step in the right direction
Click to expand...
Click to collapse
Well whatever they did, I was very impressed with what I felt today and it made my decision to make the jump and pre-order

They changed the screen protector to PET, this is one of the best and most overlooked features.

Semantics said:
They changed the screen protector to PET, this is one of the best and most overlooked features.
Click to expand...
Click to collapse
Thanx for the correction. Cant believe i forgot it was pet with all the 3d printing i do lol..

Fatmonk8 said:
Well whatever they did, I was very impressed with what I felt today and it made my decision to make the jump and pre-order
Click to expand...
Click to collapse
Where did you find it in store? I haven't actually held one yet but my order is in. Thought about swinging by a Best Buy soon.

94b20gsr said:
Where did you find it in store? I haven't actually held one yet but my order is in. Thought about swinging by a Best Buy soon.
Click to expand...
Click to collapse
Best buy had one but it was off and I couldn't power it on, Verizon had one on and working, so I got to actually play with it. I'm telling you, the improvements they did to the folding screen are amazing imo. That's always been my thing that keep me from getting the fold, but as soon as I felt how much better it was on the 3, I went ahead and pre-ordered.

Fatmonk8 said:
Idk I tried out the phone in store, and this iteration of the fold felt more like glass and less like plastic and I didn't see a noticeable screen protector like the Fold 2.
Click to expand...
Click to collapse
MrMobiles review advised they have used a new type of screen protector this year that ends underneath the bezels of the screen, so its more 'built in' than ever. It's also not made from TPU, so you wont get those nasty finger smudge marks as much.

vinokirk said:
MrMobiles review advised they have used a new type of screen protector this year that ends underneath the bezels of the screen, so its more 'built in' than ever. It's also not made from TPU, so you wont get those nasty finger smudge marks as much.
Click to expand...
Click to collapse
Maybe they were tired of repair screens of people who ripped the protector off and somehow damaged the screen, lol. I changed screen protectors on my z Fold 2 weekly trying to find the right one and the screen was always perfect.
Also the PET screen protectors definitely don't smudge as much and they're easier to wipe off. I hope they're scratch resistant if they're making it harder to remove. I'm ocd about hairline scratches in my screen protectors. Drives me insane.

Hi, I have removed the screen protector on my fold2 and I'm using it for months without any protectors - I could not stand the plastic feelings - the glass touch is perfect on the fold2 and it does not scratch that much. I'm curious - as the fold 3 has now non removable PET layer - how it would be compared to the fold2 without any protectod vs the fold 3 ?

Watching some videos from Korea, and it seems Whitestone Dome has a UTG screen protector for the inner folding screen.
Sorry, video is in Korean, but no doubt you can work it out from watching.
Whitestone Dome Silk.

Dolgogi said:
Watching some videos from Korea, and it seems Whitestone Dome has a UTG screen protector for the inner folding screen.
Sorry, video is in Korean, but no doubt you can work it out from watching.
Whitestone Dome Silk.
Click to expand...
Click to collapse
I think that thing is like $80.

My whitestone silk is arriving tomorrow, still waiting on my phone to ship out next week

I hope that this PET protector wil be still possible to remove to have nice glass experience.

On my fold 3 I can feel a edge from screen protector so it seems to be removable, it isn't embedded under the plastic frame.

You already have fold 3? Can you please tell me how is the feeling / touch on the built in PET protector? Is it glass like touch/look?

festr said:
You already have fold 3? Can you please tell me how is the feeling / touch on the built in PET protector? Is it glass like touch/look?
Click to expand...
Click to collapse
Yes that is correct I got mine on 18th August after ordering it on 11th August. I can say surface is smooth and feels good. Hardly any visible finger prints when device is on. Like it is with those plastic ones that makes it visible.