my realme x2 got hardbrick and only respond in edl mode - Realme X2 Questions & Answers

i recently hard bricked my realme x2 my flashing a wrong file .Now my phone dont even start or respond to charging .But only respond when i connect to my pc and i install the drivers and now it is show as qualcomm devies under ports in device manger.I cant go to the service centre beacause im in lockdown.Can any one pls provide the opp frimware that install usinf qfil tool in edl mode of my phone pls help

Related

ZTE NUBIA Z9 MAX Hard brick

Hello
I have a problem with ZTE nubia z9 max
( Snapdragon 615 )
The phone had CyanogenMod and for a while everything was suddenly after resetting no longer activated .
The computer does not detect it , and sometimes just how are connect it to your computer LED flashes .
Please help !
Sorry for my English.
Hello! Do you resolve your problem? I have the same
sadece 9008 port görüyor
My phone is not turned on
please help me
nubia z9 max nx512j
So far I don't think that anyone can help us ... I'm in the same situation the Qualcomm HS-USB QDLoader 9008 is present there, I have the recovery with the rawprogram0.xml and the patch.xml and the programer ... and even after I added those files in the proper directory using the Nubia Emergency tool 1.0.6 and even after the Nubia Emergency Tool is flashing it fo 0 to 100% and is saying SUCCESS in the end the phone once again restarts in download mode and again the Qualcomm HS-USB QDLoader 9008 is getting present in the device manager and non of the hard buttons pressed are doing anything on the phone... no matter if I press Vol - and Power button, or Vol + and Power button or even just trying to Power Button only pressed... It is simple ... we need a full QFIL ROM to be provided from ZTE to make it back to live .... there is no other way of fixing this brick .... !!!
P.S. Someone on 4pda.ru mentioned that he was successfully restored such hard brick with JTAG, can anyone here shed some light about that method ? Do we need a special box or only standart micro USB cable will work out ?

lenovo vibe p1 bricked while trying to flash lollipop via qpst .. pls help

i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help
mohamed_ragab09 said:
i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help
Click to expand...
Click to collapse
Hi Mohamed,
When you try to connect your dead phone to PC, does the PC or phone show any indications of detecting it?
If there's even a slight response like a notification sound in PC or blinking on the Phone LED or screen, there's a good chance we can revive it.
I am telling you this since I have been through this stage a few times.
renjujvcool said:
Hi Mohamed,
When you try to connect your dead phone to PC, does the PC or phone show any indications of detecting it?
If there's even a slight response like a notification sound in PC or blinking on the Phone LED or screen, there's a good chance we can revive it.
I am telling you this since I have been through this stage a few times.
Click to expand...
Click to collapse
thank you very much for your help .. i managed to unbrick my device with a friend's help .. he said he heated on the memory chips or something like that to make the phone readable .. apparently the flashing problem was my win 10 device because once the phone show 9008 com on flashing software the flash process went ok on his win 7 device

Pleas help revive my hardbricked razer phone.

Hi durning flashing factory image i have bricked my phone. I did factory reset in recovery mode and after that i get stuck in bootloop, so i tryied flash factory img via fastboot not the first time. Then i get stuck in bootloop and couldn't access recovery mode or download mode. Phone didn`t wake up after few reboots when i used flash_all command(i did this many times with no problem) so i unpluged usb cable after few munutes if "waiting for device". Now phone is dead and only respond is when i plug it to pc in device manager it's found now as a "Qualcomm HS-USB QDLoader 9008". I have searched all internet and there is no thread about our razer phone. The very few methods and not for razer phone. My only hope that i think my work in this situation is use backup of 'mmcblk0.img' or "debrick.img" from a working device and try to flash it using sd card and "Win32 Disk Imager" Could somone pleas extract mmcblk0.img from its own working razer phone and share it to me/us here? Or if you have another idea pleas tell me. Ps:sorry for my english.
Unbrick project razer phone
Hi i have found company (if you google "arykstore") that deals with hardbrick issues as mine. They just started unbrick project on razer phone after my request for help. If they rise money to obtain working razer device they will extract and provide essential filles to resurrect any hardbricked razer phone
I have the same problem, only download mode available and flaahing is not working

Anyone who can help me?my lgg7 can't boot

my phone is lgg7 Tmobile ,yesterday I want to use the crack's LGUP to updata my phone ,but there is something wrong ,the LGUP Wrong code is ox2000, then I exit the LGUP.Then I reboot my phone ,it was reboot to download mode ,I flash again.Also it is the same. I forgot to to exit LGUP.Then I find my phone is dead .When I connect the computer . It show the 9008 port .I had try some ways to flash my phone ,but it doesn't work . And the LGUP can not identify my phone because my phone can't get to download mode .
I wish someone can help me . Thanks.
If u cant get it to download mode u are out of luck.
Wharanty?

Realme x2 got bricked while downgrading,HELP!!

I had been using realme ui 2.0 on my realme x2 but was frustrated by the bugs so decided to roll back to ui 1.0 (from official website) while the loadng was going on the screen went blank and since then my phone is just bricked as i cannot enter fastboot,recovery modes,not charging nothing just dead .But when i connect it to the pc ,it is recognised as qualcom 9008 com3 as i installed qualcom drivers on pc.(my phone was never rooted nor the bootloader was unlocked).
Hint: Add Realme X2 to this thread's title thus mainly owners of this phone get addressed.
Qualcomm EDL/ 9008 Mode is an Emergency Download mode that is present in every Qualcomm device.
This "Download mode" is enabled when the device can't properly boot (It can also be booted into , using twrp or commands) this can be because of an Improper flash (Like yours) or something on the inside being damaged (less likely).
How do we get out of this EDL mode?
1.If device isn't actually damaged/bricked and just accidentally booted into EDL pressing all three buttons will reboot the device out of EDL , you will have to press it for a long time. (Easiest)
2.Give up and by a new device. (second easiest but also the most expensive)
3Give it to Realme service , many people have done this and gotten back their phone most of the time for free! , but they can charge about $30.
4. Do-It-Yourself , as of now the Firehose file for the Realme X2 is not available which is required to be able do anything useful in EDL mode. (Think of Firehose as a secret key , it is different for other phones , Realme X2 Pro firehose won't work on the Realme X2 , sometimes just submodels of the same phone can have different keys for this.)

Categories

Resources