Develop Bugs

lenovo vibe p1 bricked while trying to flash lollipop via qpst .. pls help

i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help

mohamed_ragab09 said:
i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help
Click to expand...
Click to collapse
Hi Mohamed,
When you try to connect your dead phone to PC, does the PC or phone show any indications of detecting it?
If there's even a slight response like a notification sound in PC or blinking on the Phone LED or screen, there's a good chance we can revive it.
I am telling you this since I have been through this stage a few times.

renjujvcool said:
Hi Mohamed,
When you try to connect your dead phone to PC, does the PC or phone show any indications of detecting it?
If there's even a slight response like a notification sound in PC or blinking on the Phone LED or screen, there's a good chance we can revive it.
I am telling you this since I have been through this stage a few times.
Click to expand...
Click to collapse
thank you very much for your help .. i managed to unbrick my device with a friend's help .. he said he heated on the memory chips or something like that to make the phone readable .. apparently the flashing problem was my win 10 device because once the phone show 9008 com on flashing software the flash process went ok on his win 7 device

Security boot error 1009 does not enter in download mode

Very good,I wanted to do a downgroade of marshmallow to lollipop in A G4 H815 of a friend to root it, since Usus in linux salt told me that it could not flash, I had to flash a SALT-compatible-LAF_flash-in-twrp.zip for recovery since this model is Turkish and the official method did not work either ... well to do the downgroade in LGUP while flasehaba LAF partition (which chance ..) Windows failed and restarted alone. (Windows 7 because the 10 did not recognize the usb in any way ..) Now the mvl is stuck in the logo of the Lg with this error .. when trying in download mode the error also appears .. And it restarts again to the logo so on with this error .. I have been searching online and nothing specific for this error only if you enter download mode, but it does not enter and the pc does not recognize it when I connect it ... we have screwed but well (this happens to me for wanting to do favors ...) if you have any advice u help I would really appreciate it .. I slept 3 hours and something and I look like a zombi at work and this afternoon should return your "wonderful" phone. A greeting

metadeivid said:
Very good,I wanted to do a downgroade of marshmallow to lollipop in A G4 H815 of a friend to root it, since Usus in linux salt told me that it could not flash, I had to flash a SALT-compatible-LAF_flash-in-twrp.zip for recovery since this model is Turkish and the official method did not work either ... well to do the downgroade in LGUP while flasehaba LAF partition (which chance ..) Windows failed and restarted alone. (Windows 7 because the 10 did not recognize the usb in any way ..) Now the mvl is stuck in the logo of the Lg with this error .. when trying in download mode the error also appears .. And it restarts again to the logo so on with this error .. I have been searching online and nothing specific for this error only if you enter download mode, but it does not enter and the pc does not recognize it when I connect it ... we have screwed but well (this happens to me for wanting to do favors ...) if you have any advice u help I would really appreciate it .. I slept 3 hours and something and I look like a zombi at work and this afternoon should return your "wonderful" phone. A greeting
Click to expand...
Click to collapse
Has anyone solution for this? I have same issue.

Hello,
You need to put your phone into Qualcomm Dloader mode again.
On the main board of your phone, there is a way to short-connect some two pins to enable the Qualcomm Dloader
and then you need QFIL to load the recovery files onto the phone to enable the normal android download mode.
---------- Post added at 01:50 AM ---------- Previous post was at 01:48 AM ----------
Ask someone who has a octopus box to fix your phone - They can DO it with USB-OVER-NETWORK

help very extrange case of bricked mi max 3 device any solution will be compensated

I bought a mi Max 3 on ebay , saying that had software issues , but that booted on fastboot and stock recovery , seller did not said anything else , when i recieve the phone , id didnt turn on or charge nothing , plugged on the computer showed edl mode only , so tried to flash a few firmwares with miflash 2016 gave me succees but still only edl mode nothing else , evenyually stayed at recieving hello package, so had to open the phone , do the test point and keep trying , literally tried all the methods in internet possible , with patch.elf, qfil doqnload mode , test point with battery cable connected and discconected , with lastest china developer , try on latest miflash 2018 i always got ACK COUNT DONT MATCH error, trying with 2016 miflash i got succees but still only edl mode nothing else , tried all of the firmwares , with miflash 2016 because with 2018 miflash always get ACK COUNT DONT MATCH, i was losing entire hope , i payed a friend to lend me his umts dongle and the latest china stable , and failed to but this time everytime i connect the device got only in fastboot mode before it was only edl , so try to flash the rom firmware againg , gave me the same error , tried global stable and beta , phone died to edl againg , so flashed the china stable latest version againg , to at least have fastboot mode on , later on i did the recovery combination got into stuck recovery restarted and when i restarted i see the mi logo had an unlocked status on the button of the screen , so i got into fastboot to see if i was able to boot into twrp and fix the phone from there but when i put fastboot devices,I GET 2 FASTBOOT IDS , i get one id only with question mark ??????? and other normal id d92d517, so i got 2 ids, if i imput the command fastboot devices againg phone displays 2 fastboot ids only with question marks ???????? and ???????? , it doenst let me flash anything or pretty much use any command on fastboot , i dont think it has pretty much any battery left i dont know if i can charge it from fastboot i just dont want the phone dead and im really lost on what to do any help will be compensated or if anybody provides unbricking services let me know , i need a solution please , please

Cannot enter Download Mode after Upgrae

Hi!
I tried the PIE Upgrade on my 710EW with LGUP.
I worked fine.. at 91% it aborted and it didnt react anymore.
Now i cannot enter the download mode.... i see the download mode logo, but the it change to the "recovery" interface "restart" "poweroff" (fost oem unlock)
Any idead what can i do?
thanks

The "fastboot" mode works so far... i get response for "device-id"

ok thats it. i bricked it qusb 9008 is only detected. no led no screen no nothing.

Maybe something i can do with the QFIL App? i have no idea. Any help appreciated
Update:
what i have so far:
i have th ekdzextract util . i extract the latest pie firmware. Mean i have mbn and img files of it
I fhave the board diag 2.99
i have the qfil 2.0 util

You solved? I have the same problem.

I have same problem too ... Any suggestion to resolve the problem ? Octoplus is paid box ... that is no way.

@Thesnable -- Did you have any success fixing your phone? I tried using LGUP to cross flash pie and it errored out also at 74%. Phone is stuck on fastboot screen with only restart or power off options. Thanks.

hi
Well no. Even with the help from a russian guy it didnt work out. i had to send it to repair.. but my phone was totally dead... not even fast oot was working.
Contact me on telegram if you like, maybe i can help you.. but i have to remember what i tried to fix. (pm me) @kruuzer92

my realme x2 got hardbrick and only respond in edl mode

i recently hard bricked my realme x2 my flashing a wrong file .Now my phone dont even start or respond to charging .But only respond when i connect to my pc and i install the drivers and now it is show as qualcomm devies under ports in device manger.I cant go to the service centre beacause im in lockdown.Can any one pls provide the opp frimware that install usinf qfil tool in edl mode of my phone pls help