ZTE NUBIA Z9 MAX Hard brick - Upgrading, Modifying and Unlocking

Hello
I have a problem with ZTE nubia z9 max
( Snapdragon 615 )
The phone had CyanogenMod and for a while everything was suddenly after resetting no longer activated .
The computer does not detect it , and sometimes just how are connect it to your computer LED flashes .
Please help !
Sorry for my English.

Hello! Do you resolve your problem? I have the same

sadece 9008 port görüyor
My phone is not turned on
please help me
nubia z9 max nx512j

So far I don't think that anyone can help us ... I'm in the same situation the Qualcomm HS-USB QDLoader 9008 is present there, I have the recovery with the rawprogram0.xml and the patch.xml and the programer ... and even after I added those files in the proper directory using the Nubia Emergency tool 1.0.6 and even after the Nubia Emergency Tool is flashing it fo 0 to 100% and is saying SUCCESS in the end the phone once again restarts in download mode and again the Qualcomm HS-USB QDLoader 9008 is getting present in the device manager and non of the hard buttons pressed are doing anything on the phone... no matter if I press Vol - and Power button, or Vol + and Power button or even just trying to Power Button only pressed... It is simple ... we need a full QFIL ROM to be provided from ZTE to make it back to live .... there is no other way of fixing this brick .... !!!
P.S. Someone on 4pda.ru mentioned that he was successfully restored such hard brick with JTAG, can anyone here shed some light about that method ? Do we need a special box or only standart micro USB cable will work out ?

Related

[Problem] I Need your help

Hello Friends,
I tried flash Jasmin ROM on My Friend LG G3 phone but apparently, the rom installation didn't successed..
Now, the G3 shows only red and blue lights. I can't enter to Download nor Recovery Modes cwith the buttons and my computer recognize the phone as Forge HS-USB QLoader 9008.
I don't know what to do.
Thanks A Lot.
Yuval
There is a possible solution, http://forum.xda-developers.com/lg-g3/help/lg-g3-unbricking-steps-clarification-t3119844/
Look at the parts after they get their phones to that state you have.

LG G Pro E986 Stuck in boot loop, no recovery no download mode, Help

So yesterday i tried flashing super LTE lollipop and being the stupid person that i am i flashed the E980 version instead of the actual version E986 (which i found later by removing the battery :| )
When rebooting the phone the home button is constantly on while the screen backlight turns on and then off again and again.
No lg logo, no recovery and no download mode.
Only when i plug in the phone to my pc it detects it as lg androidnet usb serialport and not Qualcomm HS-USB QDLoader 9008 like in other threads. Can i still get stock rom back? help much appreciated.
Edit: Okay i don't know why but apparently when i pressed vol + and vol - simultaneously and then connected the usb to pc despite showing a black screen it actually was download mode because using Lgflashtools i managed to install stock jelly bean. And i thought i was full hard bricked :/
reserved.
mine is detected as Qualcomm HS-USB QDLoader 9008 but nobody has achived to get live my OGPro...
Have you found the required TOT file and DLL?
I am having the same problem with LG G Pro e98820c after flashing wrong rom and unplug USB during flashing process.
Now the phone is stuck at Brick qualcomm hs-usb qdloader 9008 mode. I have some tools such as Smart diagnosis tool, BoardDiag, Androidbrick, Qfil/QPST ....But I have no proper guide how to use them to unbrick qualcomm hs-usb qdloader 9008 mode.
Have you got a solution for your brick phone.
Thanks , Sho Thant.

Hard bricked...Need a solution :(

Hello,I recently flash a wrong file and now my device is straight up dead no logo nothing the led blinks for a mini second and turns off I tried using qfil and mi flash but it was getting detected as 900e port and wasn't even detected on mi flash I tried updating drivers and got it to 9008 but still it would get stuck forever when I hit download asap in qfil or would show some sahara port error and still no detection on mi flash even in 9008 mode I tried over 50+ times using the button combinations to get it to 9008 mode but every time it would be 900e any solution other than deep flash as I have just one type c cable and I may screw up
Press volume up key for 15 seconds, then press power button & insert usb (within a second) to pc..it will get it to edl mode..
probably your only way out is deep flashing, i've been through this
any solution for this ? i'm suffering the same

How could I fix specified recourses or device not available error on mi flash tool?

Whenever I put the battery on my redmi 1S MI logo keep restarting in every 2 seconds and and the fastboot mode also do this . After that I tried that test point method.and after that I discovered that my battery died and it is not charging then after some days I bought a new battery and while continuing the process I got the error "specified resources or device is not available" in 18 seconds of process in mi flash tool. when the qualcomm hs-usb loader 9008 port convert into Qualcomm hs usb 9006. Now my device is stuck in EDL mode no display black screen no response on and volume up down power button and when I connect the phone to PC it detects as the Qualcomm HS USB 9008 port.and when I connect the phone to the charger of PC without battery the red LED Notification light just blinks one time. Now please help me I got one and only the phone. And now I can't buy a new phone please suggest me away to get out of this problem. What do you think my phone hard bricked???.
:crying:
parag2001 said:
Whenever I put the battery on my redmi 1S MI logo keep restarting in every 2 seconds and and the fastboot mode also do this . After that I tried that test point method.and after that I discovered that my battery died and it is not charging then after some days I bought a new battery and while continuing the process I got the error "specified resources or device is not available" in 18 seconds of process in mi flash tool. when the qualcomm hs-usb loader 9008 port convert into Qualcomm hs usb 9006. Now my device is stuck in EDL mode no display black screen no response on and volume up down power button and when I
connect the phone to PC it detects as the Qualcomm HS USB 9008 port.and when I connect the phone to the charger of PC without battery the red LED Notification light just blinks one time. Now please help me I got one and only the phone. And now I can't buy a new phone please suggest me away to get out of this problem. What do you think my phone hard bricked???.
:crying:
Click to expand...
Click to collapse
Hi @parag2001
Follow the steps its a similar problem like yours
Link
https://forum.xda-developers.com/redmi-1s/help/redmi-1s-bricked-t3788482
Hope it helps
Alan Jose said:
Hi @parag2001
Follow the steps its a similar problem like yours
Link
https://forum.xda-developers.com/redmi-1s/help/redmi-1s-bricked-t3788482
Hope it helps
Click to expand...
Click to collapse
I tried each and every version of Mi Flash tool but not the first one. On each versions the Qualcomm HS USB qdloader 9008 changed to 9006 but after 4or 5 seconds the loader reverts back to 9008 and the error happens.
Will try the first version of mi flash tool. Thanks.....
parag2001 said:
I tried each and every version of Mi Flash tool but not the first one. On each versions the Qualcomm HS USB qdloader 9008 changed to 9006 but after 4or 5 seconds the loader reverts back to 9008 and the error happens.
Will try the first version of mi flash tool. Thanks.....
Click to expand...
Click to collapse
Did u fixed it??
Alan Jose said:
Did u fixed it??
Click to expand...
Click to collapse
Nope .. but I am trying.. iam think ing to follow this
https://www.google.co.in/amp/s/www....e-the-right-kind-of-rom-qhsusb_dload_edl/amp/
Can it fix my device???
Please suggest me a way..

my realme x2 got hardbrick and only respond in edl mode

i recently hard bricked my realme x2 my flashing a wrong file .Now my phone dont even start or respond to charging .But only respond when i connect to my pc and i install the drivers and now it is show as qualcomm devies under ports in device manger.I cant go to the service centre beacause im in lockdown.Can any one pls provide the opp frimware that install usinf qfil tool in edl mode of my phone pls help

Categories

Resources