Hello,
I have a Dasaita Max10 (PX6, stock rom, rooted) with a Dasaita DAB+box (not usb) so I‘m stuck to the stock dab+App.
Now if I receive a call it switches to zlink (carplay) as it should do, BUT the music just keeps playing at full volume. Also after ending the call , it doesn‘t switch back to the dab+app.
If I use the FM-radio app, both works flawlessly.
Is there a way to set dab+app as standard radio app or any other suggestions?
thanks,
Apollon
Related
Ok, so here's the deal. I have a rooted T-mo G3 (D851) on a stock rom, out of the box it's been awesome to use with my Pioneer AVH-X2600BT head unit in my scooby. I was messing around with themes a short while ago and then the bluetooth stopped working intermittently. From what I can tell the mix-rate of the A2DP stream changes from 44k to 3hz and all you hear are beeps at multiple amplitudes. The beeps are playing out of the buffer in the head unit until it empties then it resets the connection to the phone. It still plays out these beeps until it's empty even if I disconnect the phone from the head unit.
I don't have this problem with two other iPhones. And previous to my screwing around, it'd work flawlessly since a bought it (launch day.)
Could I have screwed up a mixrate setting someplace? I do have a custom mixer xml for boosting headphone port and speaker audio but I never touched the settings for the bluetooth driver.
This behavior is intermittent and it matters very little what content I'm playing through it. I do notice that when this is happening, no metadata or control is capable through AVRCP either. (i.e. Pandora app can't connect to the phone, no album art, etc)
Sometimes it'll stop doing it and play normally for the rest of the session (drive) after a few minutes and everything is normal. Sometimes it doesn't do it at all and sometimes I can't get it work normally at all.
Here's a video showing the behavior:
http://youtu.be/qYuuTG01x1E
Reset your Bluetooth on your headunit and pair it again with all your bluetooth devices.
I had a similar problem with my LG G3 and my Pioneer AVH-8500 where my Pioneer will not recognize my LG G3 anymore but recognizes my Note 3.
I fixed the problem by resetting my Bluetooth on my Pioneer and had to pair all my devices back to it again.
You will have to look into your Pioneer manual on how to reset your bluetooth.
Edit: I just remembered something.
Did you happen to update or change your firmware.
Some KitKat firmwares are missing the Bluetooth Metadata and will not function properly.
Use autoaudio download it from playstore. This fixes my problem on metadata
Hey thanks guys.
I reflashed the bt radio in my head unit and the problem so far has seemed to go away. Metadata and everything works again.
I appreciate the heads up from another pioneer user.
Vexamus said:
Hey thanks guys.
I reflashed the bt radio in my head unit and the problem so far has seemed to go away. Metadata and everything works again.
I appreciate the heads up from another pioneer user.
Click to expand...
Click to collapse
How exactly did you reflash the bt radio? I have the same head unit and am having problems with it dropping the bt connection to my G3
I just got forced to upgrade my LG G3 to Android 5.0 and it completely screwed up my Bluetooth audio connection in my car.
Bluetooth sync to home audio playback is fine, but BTooth audio is completely corrupted with the Pioneer AVH-X2600BT.
I cant find the instructions on how to reflash my stereo firmware to reset bluetooth settings. I cleared my bluetooth devices in the stereo setup, but to no avail. Can you point me to instructions on a reflash?
I am having the same issue. I have 2 other bluetooth devices that my G3 will connect to and playback is fine for as long as I have battery life. But when connected to my Pioneer AVH-x2600bt, I get constant skipping after 2 minutes of playback. I can pause it for a couple of minutes and when I start playing again it's fine for another 2 minutes. I have done a hard reset on the Pioneer and reconnected my G3 but no change. I have unpaired and cleared all of the bluetooth data in my phone and reconnected, no change. All of the Kit Kat OS devices I have still work fine with the Pioneer but none of the Lollipop devices work. I emailed Pioneer, their reply was for me to take my deck to a service center. That will do no good. One of two things needs to happen, Google needs to update their bluetooth firmware or Pioneer needs to update the firmware for the AVH-x2600bt. Until one of those two things happen I guess I'll be using stone age technology, an auxiliary cable.
Thank you, that is all.
Hello
I can't sent the music to my car radio according to the version of Android. In version 5.0 with different kernel that doesn't work, and with 5.1.1 (blisspop) it works. I 'm preferred the custom rom because I like some features. Someone have a solution or an explanation of why?
Hi All,
I have recently experienced an issue where the sound has stopped working (not going through car speakers) when in music, video or navigation app.
This used to work perfectly.
Sound works normally when CD inserted
Sound works normally when using radio app.
Video app plays video - but no sound.
Music app plays the mp3 tracks - but no sound - can see the progress bar moving along (music (mp3) on SD card - 8GB formatted FAT32)
Also have issue with the BlueTooth - connects to phone but seems to be around wrong way - it appears the head unit thinks it is in phone handset mode when it is not - as result can hear people talking through the car speakers but they cannot hear me unless i toggle handset mode, but then people can hear me talking, but i cannot hear them...
I suspect for whatever reason the audio out is being directed to Blue tooth or whatever
Has anyone else come across this issue, and if so is there a solution?
Device
Pumpkin 2-DIN
KD-C0224
MCU version: MTCB-KLD-V2.02
Model # : S07
Android Version: 4.2.2_01092014
Have you tried making your phone and the head unit forget each other?
NYCAR said:
Have you tried making your phone and the head unit forget each other?
Click to expand...
Click to collapse
Yes I have - same result
Have also tried
- resetting unit - factory reset
- pulling the power on unit for
Whatever the issue it appears to be persistent between boots....
Now there is another issue - won't display the feed from the reversing camera
The head unit switches into camera mode, but displays message "No Signal"
davek76 said:
Hi All,
I have recently experienced an issue where the sound has stopped working (not going through car speakers) when in music, video or navigation app.
This used to work perfectly.
Sound works normally when CD inserted
Sound works normally when using radio app.
Video app plays video - but no sound.
Music app plays the mp3 tracks - but no sound - can see the progress bar moving along (music (mp3) on SD card - 8GB formatted FAT32)
Also have issue with the BlueTooth - connects to phone but seems to be around wrong way - it appears the head unit thinks it is in phone handset mode when it is not - as result can hear people talking through the car speakers but they cannot hear me unless i toggle handset mode, but then people can hear me talking, but i cannot hear them...
I suspect for whatever reason the audio out is being directed to Blue tooth or whatever
Has anyone else come across this issue, and if so is there a solution?
Device
Pumpkin 2-DIN
KD-C0224
MCU version: MTCB-KLD-V2.02
Model # : S07
Android Version: 4.2.2_01092014
Click to expand...
Click to collapse
To offer you the best customer service, we will send you the return address for full refund of your order.
I also have a Pumpkin KD-C0224 head unit and it works really great, does way more than you need it to do. (http://www.amazon.co.uk/Pumpkin-Capacitive-Multi-touch-Navigation-Multimedia-y/dp/B00OB90SOY/)
1. About the sound issue, perhaps there is something wrong inside of the unit.
2. About the Bluetooth, you can try settings-》backup&reset, then do the “factory data reset to see if it can help.
3.About the "No Signal", I have encountered this issue and Pumpkin sent a video instruction http://www.youtube.com/watch?v=lu8maRNrtlk
PS:You can ask for help from Pumpkin and customer service has been very good.
Android 4.4.4 Car Unit S07 sound problem
Hi to all,
I have a similar problem. My device is a Universal 2-DIN, Model: S07
Lately I had a problem with sound coming from sd-card. The quality of sound was good enough for some time and few minutes later, the sound coming only from one speaker, then transfered to another speaker then the listening becomes very bad and suddenly comes back very good as in the beggining.
That was in the past because now there is no sound at all.
More specific:
I have sound in Bluetooth, CD-DVD, Radio and the touching clicks (on device).
No sound at all from the device such as NAVI apps, in 2 sd-card slots and 3 USB's (2 back, 1 front). Of course I see video but without sound and the music plays mp3 once more without sound
I have already done the following:
I opened the device, unplug and plug-in again all the ribbon cables. Factory reset in Android 4.4.4, upgrade to 5.1 lollipop with reset to factory settings again, and finaly downgrade back to Android 4.4.4 with reset to factory settings again. The problem is still the same.
Is it damaged ribbon cable ? or other hardware problem ? because I don't think that is a software problem. Any opinion is helpfull.
Since yesterday I am having a strange problem with the bluetooth profile to make calls (I think HFP - "Hands-Free Profile" or HSP - "Headset Profile"), does not play the audio call and my interlocutor can't hear me. Even the accessories that also support Advanced Audio Distribution Profile (A2DP) for audio playback does not work anymore, but if I disable call profile, then the audio (Play Music, TuneIn Radio, Spotify, etc...) is correctly reproduced.
Before I never had this problem, my smartphone is a G3 D855 32GB / 3GB with stock rooted MM ROM v30B.
Any suggestion to solve problem?
Having an issue where I can't get the microphone on any of my Bluetooth devices to work with OK Google.
I have a motorcycle Bluetooth (china brand) and also a set of Jabra headphones. Both work done playing music and using them on phone calls but for the life of me when I activate OK Google it defaults to the internal microphone only and won't use the Bluetooth microphone.
I've tried changing all the settings under voice in the ok Google settings and also the settings to do with Bluetooth headset and hands-free bit still can't get it to work.
Is it just me, is it my settings or has OK Google stopped working via Bluetooth (I've read others have no issue)
Running 8.0 but have also tried it on a 7.2.1 S8
Any help or ideas?
Hi!
I just have to ask, did you ever get this working, and if so, how?!
I'm having the exact same problem as you, with a Galaxy S6 on 7.0 and a BT-S2 chinese helmet intercom.
I'm going crazy and really considering going back to iphone just because of this.
Thanks!
Gumboot said:
Having an issue where I can't get the microphone on any of my Bluetooth devices to work with OK Google.
I have a motorcycle Bluetooth (china brand) and also a set of Jabra headphones. Both work done playing music and using them on phone calls but for the life of me when I activate OK Google it defaults to the internal microphone only and won't use the Bluetooth microphone.
I've tried changing all the settings under voice in the ok Google settings and also the settings to do with Bluetooth headset and hands-free bit still can't get it to work.
Is it just me, is it my settings or has OK Google stopped working via Bluetooth (I've read others have no issue)
Running 8.0 but have also tried it on a 7.2.1 S8
Any help or ideas?
Click to expand...
Click to collapse
herrbergman said:
Hi!
I just have to ask, did you ever get this working, and if so, how?!
I'm having the exact same problem as you, with a Galaxy S6 on 7.0 and a BT-S2 chinese helmet intercom.
I'm going crazy and really considering going back to iphone just because of this.
Thanks!
Click to expand...
Click to collapse
Sorry for the late reply. Did not get any notification about the reply.
Did not get it working. Turns out it needs to be included in the headset as a standard feature (which the china headset did not have) Now use Sena headsets and they work great.
My car (Seat Leon 5F with Media System Plus) suddenly displays no more song info and the progressbar is f***ed. I hoped Oreo would change it, but it doesn't.
However other phones combined with my car work and my phone works in other cars. I already tried resetting the Media System. It seems it has something to do with the AVRCP version.
Any ideas?
I have got the same problem (no song info on my car's media display) after upgrading to Oreo (it was fine on Nougat).
Modifying Bluetooth codec/AVCR version in developer options didn't help.
did a full wipe and installed 5.0.3 from scratch, it's working now
A full wipe also restored music meta-data, however music controls (track skip/repeat) from the steering wheel do not work. Worked fine on Nougat.
I don't want to do a full wipe.
I tried unpairing and pairing with my car again - didn't help (still no song info).
Does anyone know what files should I delete to reset Bluetooth settings without a full wipe (I'm rooted, so can access/delete any file)?
ballaz said:
A full wipe also restored music meta-data, however music controls (track skip/repeat) from the steering wheel do not work. Worked fine on Nougat.
Click to expand...
Click to collapse
They don't work for Bluetooth headphones and they don't even work for wired headphones FYI
I have found a solution that works for me:
1. Set Google Play Music as the default music player in the settings.
2. Reboot.
3. Problem solved.
Weird stuff...