Related
Hi,
My One X got the OTA update yesterday to go to 1.28
today I was flashing a ROM via recovery but something went wrong and afterwards the phone wouldn't boot up just got stuch at the HTC logo page.
Since then I've been trying to sort it out but with limited success.
I've essentially followed the advice given on this thread;
http://forum.xda-developers.com/showthread.php?t=1599748&page=4
However nothing has worked for me. I've tried flashing the RUU from here:
http://forum.xda-developers.com/showthread.php?t=1543604
But it won't install as I was already on 1.28.
After that I tried taking a boot_signed.img and system.img from the RUU. i was able to flash the boot_signed.img ok but when I try to flash the system.img I get an error as follows:
" FAILED (remote: (00000006))"
Does anyone know what this means? Is it something to do with the size of the system.img?
apart from getting this working there doesn't seem to be anything I can do other than wait for the 1.28 RUU to be released.
If anyone has any ideas I'd be really appreciative as I've got a pretty useless phone right now.
Thanks in advance.
Hi all
I have the same problem, i flashed the 3 dot fix from http://forum.xda-developers.com/showthread.php?t=1582506, not fully paying attention at the time that it was only for custom roms.
I am now stuck at the htc beats screen. Have done all the above and get the same error with system.img.
I have left it a few days without being able to use my phone in the hope that i could find a fix to very little success.
So please if anyone could help in any way would be much appreciated.
Thanks
- you need to have ruu of .28 (i don't think there is yet) and run the EXE file as you can't fastboot flash as of now
- you need to install htc software before you run ruu exe.
as for russel if you did not OTA read this
http://forum.xda-developers.com/showthread.php?t=1599748
same problem, waiting for a 1.28 ruu (chinese one didn't work (of course, but had to try anyway)). going to a Vodafone shop that has a technician on site, see if they can help (maybe they already have a 1.28 ruu).
noromamai said:
same problem, waiting for a 1.28 ruu (chinese one didn't work (of course, but had to try anyway)). going to a Vodafone shop that has a technician on site, see if they can help (maybe they already have a 1.28 ruu).
Click to expand...
Click to collapse
Where did you find the chinese version? We may be able to flash the system.img from that RUU
The moral of the story...always nandroid.
can't remember from which site it was, but there was a thread here about it (maybe in the dev section) with a link to a chinese site. took about 5 hours to download (i'm in europe).
was just in the vodafone shop, spoke to a technician, they don't have ruu 1.28, but he was going to ask around and told me to contact him in a week to see if he managed to get it.
A week? Hopefully someone will have posted it before then, hope so anyway, I need my phone back
If anyone could confirm what the fastboot error "remote:000000006" means I might be able to get around it.
Maybe it is because it is the wrong version.
"remote:000000006" = file too large. There is a way to by-pass it, but can't remember how exactly. There should be another fastboot? a "gray htc one"? Just my 2 cents.
disclaimer: (for all other readers) note that flashing boot.img and system.img is not recommended. use RUU's instead
riemervdzee said:
"remote:000000006" = file too large. There is a way to by-pass it, but can't remember how exactly. There should be another fastboot? a "gray htc one"? Just my 2 cents.
disclaimer: (for all other readers) note that flashing boot.img and system.img is not recommended. use RUU's instead
Click to expand...
Click to collapse
Thanks for this, I'll have a dig around and see if there is another fastboot available.
In work now so will have a play around later.
EDIT: If you remember what the workaround for that issue was please let me know.
jedi5diah said:
-
as for russel if you did not OTA read this
http://forum.xda-developers.com/showthread.php?t=1599748
Click to expand...
Click to collapse
I have try that method, but when it says "install RUU" how? i took the ROM.zip out and tried to flash the recovery.img that went fine and then when it came to the system.img says failed with the error from the 1st post.
I cannot run the RUU.exe as it say device cannot be found. (Have htc sync and drivers.)
Also tried differnt fastboots.
Lastly does the bootloader have to be locked or unlocked?
you have to flash back the original recovery, relock (fastboot oem lock) the phone, boot back into bootloader (power + volume down), make sure you have hts sync installed with the drivers, run ruu exe and follow onscreen instructions.
I think you need to be in fastboot then connect your phone to the pc and then run the exe and it should recognise your phone.
As mentioned above you also need to relock your bootloader before running the RUU.
When i run the RUU.exe and follow on screen instructions says device not found. I have htc sync installed and the drivers.
when i load back into bootload (the step before run RUU) do i enter back into FASTBOOT or stay in HBOOT?
EDIT: now got error battery below 30% so ill recharge and try again later. Thank you all for helping (wether this works or not) really appreciate it. (Sorry to the Op for deviating slightly from post. Didn't realize my issue was slightly differnt from yours.)
when this happen to me i just put the usb wyre en another usb port and restart my computer, this solve the problem
I finally got it to run the RUU, but now get the error 140: BOOTLOADER VERSION ERROR.
Have i downloaded the wrong RUU? as far as i have found there only 2 for Europe?
RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.26.401.2_Radio_1.1204.90.13_release_251208_signed.exe
Thats the one i have. Im on contract (O2), live in south east england.
Thanks.
You may have the same issue as me. Did you update your firmware via an over the air update this week?
If yes you will have to wait for the 1.28 RUU to be released.
Sadly yes. Just minutes before applying the 3 dot fix. Was late at night wasnt paying attention.. So now its the waiting game. Thanks all.
russelblack said:
Sadly yes. Just minutes before applying the 3 dot fix. Was late at night wasnt paying attention.. So now its the waiting game. Thanks all.
Click to expand...
Click to collapse
Hopefully we won't have to wait too long. The OTA came out on Thursday I think so we should have the RUU in the next few days....
The new RUU should be available for download tonight:
http://forum.xda-developers.com/showpost.php?p=25125579&postcount=381
Hi I've been searching for days and have always been able to find answers but this one has got me.
My gf has a HTC Desire HD, pretty sure it's Vodafone since she works there. Tried to do a normal update a while ago and it never started since, just sits on the HTC logo. I can boot into fastboot hboot recovery and all that but I'm stuck as to what to do from here.
I have found a couple of WWE RUU's but the error out with a CID error, I've also found a Vodafone backup someone took from clockwork but this phone only has stock recovery and I don't know how to flash clockwork without being able to boot the phone.
Hoping someone might have an easy answer, please let me know if I need to provide more details.
Thanks.
If its rooted just place a rom on the sd and flash it with full wipe. You are not suppose to accept OTA updates if the phone is rooted if Im not mistaken. If not rooted then go to HTC websight and get the official RUU and install, instructions should be on websight.
http://www.htc.com/europe/help/htc-desire-hd/#download
primussw said:
Hi I've been searching for days and have always been able to find answers but this one has got me.
My gf has a HTC Desire HD, pretty sure it's Vodafone since she works there. Tried to do a normal update a while ago and it never started since, just sits on the HTC logo. I can boot into fastboot hboot recovery and all that but I'm stuck as to what to do from here.
I have found a couple of WWE RUU's but the error out with a CID error, I've also found a Vodafone backup someone took from clockwork but this phone only has stock recovery and I don't know how to flash clockwork without being able to boot the phone.
Hoping someone might have an easy answer, please let me know if I need to provide more details.
Thanks.
Click to expand...
Click to collapse
Get me the CID and Iwill provide u with a ruu that works...VODAFONE from where? not all ruu's are available, but at least we can find one that makes your phone back to work...:good:
Unfortuanately it isn't rooted, I probably would've had more luck by now if it was.
I can't see the CID on the bootloader is there a command on fastboot or something to find this? I've been searching but can't find anything.
Sorry I thought of that afterwards, it's Vodafone Australia.
Thanks for the replies guys!
I just tried that European RUU thought I didn't have anything to loose but it came back with ERROR 132 Signature Error.
The Australian HTC site doesn't have a RUU to download that I can see.
primussw said:
I just tried that European RUU thought I didn't have anything to loose but it came back with ERROR 132 Signature Error.
The Australian HTC site doesn't have a RUU to download that I can see.
Click to expand...
Click to collapse
Read up here and see if this can help you or not.
http://forum.xda-developers.com/showthread.php?t=905003
and
http://forum.xda-developers.com/showthread.php?t=857537
Also the other option is to go to the Ace Hack Kit forum IRC Chat room and speak to those guys there. They are Abolutely GREAT with any issues and they might be able to solve your issue. I would try them first. IRC chat towards the bottom of first main post.
http://forum.xda-developers.com/showthread.php?t=1259821
Good Luck
primussw said:
Unfortuanately it isn't rooted, I probably would've had more luck by now if it was.
I can't see the CID on the bootloader is there a command on fastboot or something to find this? I've been searching but can't find anything.
Sorry I thought of that afterwards, it's Vodafone Australia.
Thanks for the replies guys!
Click to expand...
Click to collapse
yep, do the following: boot in hboot and choose fastboot. Then plug the phone (check that you see fastboot usb in red)
Open cmd as admin or a terminal as root and then, type fastboot getvar all. Get the INFOcidnum and paste it here. With that I will try to find a ruu that works. But stop trying flashing other things...you might mess the device.
Hi
Thanks again for the help. The cidnum: VODAP021
Hope this helps, I haven't checked out those other links yet though.
primussw said:
Hi
Thanks again for the help. The cidnum: VODAP021
Hope this helps, I haven't checked out those other links yet though.
Click to expand...
Click to collapse
Ok, I will look for a RUU (to see if I can get one that works, and will send it over a PM)...:laugh:
No post it here in case someone else has the same problem so he too can get the file.
Sent from my Desire HD using xda premium
Solution!!
Ok firstly sorry it's taken me ages to post this but I finally came up with a solution to this problem using a few different guides and instructions on these forums.
So the problem was I had a Vodafone AU branded HTC Desire HD that had no root and a locked bootloader that was stuck in a bootloop after a failed official update. The main problem is that there is NO stock recovery ROM ANYWHERE for a Vodafone AU HTC Desire HD, trust me I looked and I am not new to looking for stuff like this. glevitan provided me with a WW ROM that I managed to get working with a bit of work, there are also many WW ROM's around that you should also be able to use. I'll try to explain as best I can as to how I got it to work (going from memory) so if anyone else has a similar problem they may be able to use this information.
1. Firstly find a suitable WW ROM to flash, it needs to be a PD98IMG.zip image to copy to an SD card. There is a Vodafone AU dump on this forum but that will not work if you are completely stock standard. I think you can get this zip from the RUU or maybe ask glevitan if he wouldn't mind helping in providing this again. I didn't want to link to his file but there are others around.
2. Create a goldcard. If you turn your SD card into a goldcard it will allow any ROM to be flashed, normally it would only accept the Vodafone AU one but by doing this it will accept the WW one. To do this I used a second phone to create the card.
I used the Ultimate multi tool which can be found here: http://forum.xda-developers.com/showthread.php?t=1180639
You may have to do a bit of reading on getting it to work, from memory you have to put in a number to a website to generate a file, I think I ended up using a different website, there's a few options in getting this done, google is your friend for this
3. Once the goldcard is created copy the PD98IMG.zip to the root directory and put it back into the phone.
4. Turn on the phone and boot to hboot by holding vol up (I think) on power on. The phone should automatically check for a suitable PD98IMG.zip file and as long as the goldcard process worked and you have a suitable ROM on the root directory it should flash it fine.
This is basically what I did and it successfully booted after a lot of looking around. I hope this helps people in the future with similar problems. If you need to ask any questions about this process as I haven't provided every single detail please feel free to contact me and I will do my best to help you out.
Thanks again to glevitan for helping and providing a suitable ROM to flash.
I am trying to revert my M9 as much as possible to stock. I am really annoyed by the red warning on start up.
Currently it is 2.9.841.2
Is there any way to figure out which RUU i can flash on the device? I am currently downloading 0PJAIMG_HIMA_UHL_L50_SENSE70_Telstra_WWE_1.32.841.7_R_Radio_01.01_U11440261_56.01.50303G_3_F_release_425231_signed but was hoping to find something without Telstra branding.
TIA
Come on guys, over 75 views and no help?
dosada said:
Come on guys, over 75 views and no help?
Click to expand...
Click to collapse
Come on guy, maybe these 75 persons had no answer, not enough time to type a text or any other reason why he or she didn't help. This is not a chat where you can expect immediate answers.
But let's get back to the topic: Are you S-ON or S-OFF? (If you don't know you're probably S-ON.) With S-ON it's not possible to downgrade or to flash RUUs with a different SKU (the 841 stands for your Telstra branding). So you won't be able to use the RUU you mentioned in your first post. Either you look for a RUU with firmware version 2.9.841.2 or higher or you pay the 25 USD to get S-OFF via Sunshine. With S-OFF you could flash an unbranded RUU. (Correct me if I'm wrong, but Telstra is an Australian carrier, right? The Australian unbranded SKU would be 710. If you prefer the unbranded World Wide English version you should look for the 401.)
Flippy498 said:
Come on guy, maybe these 75 persons had no answer, not enough time to type a text or any other reason why he or she didn't help. This is not a chat where you can expect immediate answers.
But let's get back to the topic: Are you S-ON or S-OFF? (If you don't know you're probably S-ON.) With S-ON it's not possible to downgrade or to flash RUUs with a different SKU (the 841 stands for your Telstra branding). So you won't be able to use the RUU you mentioned in your first post. Either you look for a RUU with firmware version 2.9.841.2 or higher or you pay the 25 USD to get S-OFF via Sunshine. With S-OFF you could flash an unbranded RUU. (Correct me if I'm wrong, but Telstra is an Australian carrier, right? The Australian unbranded SKU would be 710. If you prefer the unbranded World Wide English version you should look for the 401.)
Click to expand...
Click to collapse
Thank you for the reply. I am in Australia. And i am S-ON unfortunately.
The de-branding is not even the biggest issue but what i really want is to get rid of the warning that it is a developer device on start up. Unfortunately this phone was sold to me the way it is. I have spent the last ween looking for the RUU of same or higher version but wasn't able to find even the one i am on
dosada said:
Thank you for the reply. I am in Australia. And i am S-ON unfortunately.
The de-branding is not even the biggest issue but what i really want is to get rid of the warning that it is a developer device on start up. Unfortunately this phone was sold to me the way it is. I have spent the last ween looking for the RUU of same or higher version but wasn't able to find even the one i am on
Click to expand...
Click to collapse
Well, at the moment I see three options you can choose from:
Get S-OFF via Sunshine and downgrade/debrand your phone. (25 USD)
Use the RUU service on llabtoofer's website. (don't know the price)
Hope that someone who already has an account can get you the 2.9.841.5 RUU from ir-file.
I know someone who might be able to help you with option 3 but I cannot guarantee anything. For example the 2.10.401.1 RUU from ir-file was corrupted/broken and because of that not flashable. In the worst case the 2.9.841.5 RUU might not work, either. (Nonetheless you would still be able to choose option 1 or 2 in that case.)
Flippy498 said:
Well, at the moment I see three options you can choose from:
Get S-OFF via Sunshine and downgrade/debrand your phone. (25 USD)
Use the RUU service on llabtoofer's website. (don't know the price)
Hope that someone who already has an account can get you the 2.9.841.5 RUU from ir-file.
I know someone who might be able to help you with option 3 but I cannot guarantee anything. For example the 2.10.401.1 RUU from ir-file was corrupted/broken and because of that not flashable. In the worst case the 2.9.841.5 RUU might not work, either. (Nonetheless you would still be able to choose option 1 or 2 in that case.)
Click to expand...
Click to collapse
These are the best iptions, personally i would go for s-off and change it to developer to have latest updates or.....change it to WWE and apply any custom roms of your liking =D i can assist you in how to do it here is my whatsaapp +52-442-230-1496.
Flippy498 said:
Well, at the moment I see three options you can choose from:
Get S-OFF via Sunshine and downgrade/debrand your phone. (25 USD)
Use the RUU service on llabtoofer's website. (don't know the price)
Hope that someone who already has an account can get you the 2.9.841.5 RUU from ir-file.
I know someone who might be able to help you with option 3 but I cannot guarantee anything. For example the 2.10.401.1 RUU from ir-file was corrupted/broken and because of that not flashable. In the worst case the 2.9.841.5 RUU might not work, either. (Nonetheless you would still be able to choose option 1 or 2 in that case.)
Click to expand...
Click to collapse
That would be great. I am really looking for a solution that is for free.
I am able to flash custom roms over TWRP but whatever i do i can't get rid of the stupid message when the phone starts up
LLegion said:
These are the best iptions, personally i would go for s-off and change it to developer to have latest updates or.....change it to WWE and apply any custom roms of your liking =D i can assist you in how to do it here is my whatsaapp +52-442-230-1496.
Click to expand...
Click to collapse
The question is whether he is willing to pay if does not need to do so.
dosada said:
That would be great. I am really looking for a solution that is for free.
I am able to flash custom roms over TWRP but whatever i do i can't get rid of the stupid message when the phone starts up
Click to expand...
Click to collapse
If nothing goes wrong the 2.9.841.5 RUU should be downloadable in around 4 hours.
Edit: There you go.
Has maybe anyone else downoaded it? When i unpack the file it is just about 32MB of size
dosada said:
Has maybe anyone else downoaded it? When i unpack the file it is just about 32MB of size
Click to expand...
Click to collapse
Why is everbody trying to unzip RUUs? Only because it's a *.zip file that doesn't mean that you should unzip it. Do you unzip rom archives, too, before you flash them with TWRP? Look at my signature and follow the instructions in the google sheet.
Thank you so much. After i gave up trying to unpack it and looked up how to do it, it worked like a charm.
Hello, so I derped really bad here and believe I bricked my phone. I am really stressing out here as I was in the process of reverting my phone to stock due to an advanced replacement HTC sent me. If I dont get my device back to them I will be charged for the replacement phone.
I had an ATT phone that was been flashed to the developers version. I HAD s-off and an unlocked bootloader.
I was in the process of modifying the CID and MID to match the ATT version of the phone so I could RUU the phone back to ATT. I accidentally set the wrong CID of DWS_0001 as I typed a D instead of a C. My MID is OPJA11000 which I luckily got correct.
Thinking I had the correct CID I relocked the bootloader and turned S back on. I then when to run the RUU for ATT and of course it failed.
My big problem is the RUU wiped out my recovery partition and now get Recovery Partition not found.
To correct the issue I went to re-flash my unlock code that I had saved when I origionally unlocked the bootloader but received an oem unlock turn off error when doing so.
I now have a phone that is on a stock developer rom, has no recovery, has a bad CID, and will not boot as it has a Software status: Modified flag. I can access the download, RUU, and bootloader menus.
I tried an RUU.zip with the following file and had no success: RUU_HIMA_UL_L51_SENSE70_ATT_MR_NA_Gen_Unlock_2.11.617.15_Radio_01.01_U11440601_76.03.50611G_F_release_445910_signed_2_Rom
Down to the 500$ question, is there a way to reset the modified flag to boot into the os so I can check OEM unlock, is there a way to OEM unlock from the download, bootloader menues, or is there a way to force an RUU to run no matter the CID? The only other option I can think of is there a way to reflash/unflast the unlock_code.bin?
Any help would be greatly appreciated!!!!!
Is an XTC2Clip or Java Card my only solution?
You should try getting a new unlock token, I'm not sure it'd work but what else is there to lose? I also am not sure it'd be different than the original.
Just saw that you were unable to even try unlocking it, sorry sir
Sent from my HTC One M9 using Tapatalk
grim489 said:
You should try getting a new unlock token, I'm not sure it'd work but what else is there to lose? I also am not sure it'd be different than the original.
Just saw that you were unable to even try unlocking it, sorry sir
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
I would but I am unable to do so thanks to the OEM unlock option that is in the developer menu that I cant boot to to check.
Maybe you could just send it back like that? I myself can't think of anything to get you out of the situation you're in. I'm sorry :/
Sent from my HTC One M9 using Tapatalk
grim489 said:
Maybe you could just send it back like that? I myself can't think of anything to get you out of the situation you're in. I'm sorry :/
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
I'm guessing they will charge me full price (500$) for the advanced replacement due to the software issue now present. :/
To be honest if this was not fixable I'd rather see if I can return the advanced replacement itself and see if they will only charge me for shipping. Ill then just work on my cracked nexus till the new ones come out.
Im currently trying to get an RUU.zip file for 3.35.617.16 but cant seem to save the rom.zip file from the .exe with out it being corrupt. I've reading that you can modify the android-info.txt file and put in your own CID and MID numbers. In not 100% sure this will work even if I can successfully modify the android-info.txt.
I was able to repair one of the rom.zip files but the android-info.txt is completely blank.
Can anyone provide me with a template of a good android-info.txt file so I can recreate mine or even modify a 3.35.617.16 .zip file for me to see if its flash able with locked bootloader and S-on?
I don't think it'll work because it's modified, but I could be wrong. What were you exchanging it for , if you don't mind me asking?
Sent from my HTC One M9 using Tapatalk
I need to put in the CID of DWS_0001 and MID of OPJA11000 as it keeps failing the device check.
I figured it would need signing but Im trying for anything right now.
http://cloud.tapatalk.com/s/57ef3fb82a3ea/android-info.txt
Also it's 0PJA, the digit not letter. I wish you luck and I wish I could help
Sent from my HTC One M9 using Tapatalk
BrownEye02 said:
Im currently trying to get an RUU.zip file for 3.35.617.16 but cant seem to save the rom.zip file from the .exe with out it being corrupt. I've reading that you can modify the android-info.txt file and put in your own CID and MID numbers. In not 100% sure this will work even if I can successfully modify the android-info.txt.
I was able to repair one of the rom.zip files but the android-info.txt is completely blank.
Can anyone provide me with a template of a good android-info.txt file so I can recreate mine or even modify a 3.35.617.16 .zip file for me to see if its flash able with locked bootloader and S-on?
Click to expand...
Click to collapse
What you're trying to do is impossible with S-ON. RUUs are encrypted and therefore can only get unzipped by special methods*. That's why so many programs state they were corrupt although they're not. Therefore chances are high that the zip files you extracted are totally fine.
If you unzip them and re-zip them you break the encryption and the signature and a S-ON phone will never accept such a modified RUU which lacks the correct signature.
Try to find someone with a java card or an xtc clip. That way you might be able to re-S-OFF the phone and from there on you can correct the CID using fastboot.
* Latest 7-zip is capable of unzipping them with right click > 7-zip > open (the second one from above not the first) > #.
grim489 said:
http://cloud.tapatalk.com/s/57ef3fb82a3ea/android-info.txt
Also it's 0PJA, the digit not letter. I wish you luck and I wish I could help
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Thanks grim for the example!
My phone will not see the zip unless it is OPJA. If it has a zero it boots to normal downloader stating no file found.
Flippy498 said:
What you're trying to do is impossible with S-ON. RUUs are encrypted and therefore can only get unzipped by special methods*. That's why so many programs state they were corrupt although they're not. Therefore chances are high that the zip files you extracted are totally fine.
If you unzip them and re-zip them you break the encryption and the signature and a S-ON phone will never accept such a modified RUU which lacks the correct signature.
Try to find someone with a java card or an xtc clip. That way you might be able to re-S-OFF the phone and from there on you can correct the CID using fastboot.
* Latest 7-zip is capable of unzipping them with right click > 7-zip > open (the second one from above not the first) > #.
Click to expand...
Click to collapse
Yeah sadly that's what I figured with the zip. I only continued to try because I was only getting Android-info errors and not zip errors.
I did message one of the members that is listed on the Verizon form but I have not received a response yet. It was just yesterday so I just need to wait. But do you have any members you would recommend?
BrownEye02 said:
Thanks grim for the example!
My phone will not see the zip unless it is OPJA. If it has a zero it boots to normal downloader stating no file found.
Click to expand...
Click to collapse
In that case you didn't only mess up the CID. Normally it has to be 0PJAIMG not OPJAIMG.
BrownEye02 said:
I did message one of the members that is listed on the Verizon form but I have not received a response yet. It was just yesterday so I just need to wait. But do you have any members you would recommend?
Click to expand...
Click to collapse
@efrant owns a java card if I'm not mistaken. However he's not living in the US so I'm not sure whether he's able to help you.
BrownEye02 said:
I did message one of the members that is listed on the Verizon form but I have not received a response yet. It was just yesterday so I just need to wait. But do you have any members you would recommend?
Click to expand...
Click to collapse
Flippy498 said:
@efrant owns a java card if I'm not mistaken. However he's not living in the US so I'm not sure whether he's able to help you.
Click to expand...
Click to collapse
Unfortunately one cannot remote S-OFF with a clip or java card, as it needs to be plugged into the phone. You either need to find someone locally or send to someone with a card.
Sent from my HTC One M9 using Tapatalk
Flippy498 said:
In that case you didn't only mess up the CID. Normally it has to be 0PJAIMG not OPJAIMG.
@efrant owns a java card if I'm not mistaken. However he's not living in the US so I'm not sure whether he's able to help you.
Click to expand...
Click to collapse
I didn't change anything else besides the MID and CID. The only other thing that was done was attempting to flash the unlock code. I was running debloated stock developer prior to all of this. After changing the above I attempted to flash the RUU and that's it. Not sure how that would of been changed.
efrant said:
Unfortunately one cannot remote S-OFF with a clip or java card, as it needs to be plugged into the phone. You either need to find someone locally or send to someone with a card.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Yeah I would rather not ship my phone overseas to get fixed. The problem is no one was listed in Colorado on the thread so I still will probably have to ship it to someone in the states.
Would it be worth me trying to just buy one for myself? My biggest hesitation for doing this is there appears to be a lot of fakes on the web.
Sent from my SHIELD Tablet using XDA-Developers mobile app
BrownEye02 said:
Yeah I would rather not ship my phone overseas to get fixed. The problem is no one was listed in Colorado on the thread so I still will probably have to ship it to someone in the states.
Would it be worth me trying to just buy one for myself? My biggest hesitation for doing this is there appears to be a lot of fakes on the web.
Click to expand...
Click to collapse
Not sure what "worth it" would be for you, but I can tell you the $179 clip from CellCorner here is genuine: https://www.amazon.com/gp/aw/d/B012T05MPG?ref=olp_product_details. They are an official distributor.
Sent from my HTC One M9 using Tapatalk
Worth it is no response from anyone and my last resort. 175 is a lot better then 500$. Thanks for pointing me to a good one!!!!!
Sent from my SHIELD Tablet using XDA-Developers mobile app
BrownEye02 said:
I didn't change anything else besides the MID and CID.
Click to expand...
Click to collapse
If you misspelled the MID while you changed it you might have found the culprit.
Flippy498 said:
If you misspelled the MID while you changed it you might have found the culprit.
Click to expand...
Click to collapse
Ahhhhhhh!!!! That makes since. Didn't realise that's where it pulled it from.
Well, looks like my MID is wrong too. [emoji21]
Sent from my SHIELD Tablet using XDA-Developers mobile app
Well the phone is off to Ohap. He/she stated they could fix the CID and MID. Will update when I get it back.
SHE LIVES!!!!!! Ohap was able to unlock and s-off to get the phone booting again. I have correctly modified the CID and MID back to AT&T standards and successfully run the RUU. Now just cant figure out why the software status modified flag is still present. Starting a new thread for that. Thanks everyone for the help!!!!
Hi guys,
I hope you can help me solve my issue. I spend the entire evening try to do it, reading through the post on this forum but I couldn't figure out a solution.
So basically I bought an HTC 10 unlocked in Ireland, and I currently have Android 7 , no mods or anything on it.
I know there was an OTA update available, but every time I check for software updates I get the error Can't update software. There was an unexpected error and the file system may be corrupted.
I tried then to do a manual update. I download the file (ruu I think) from HTC website and I rebooted the device in download mode and tryed to install. I got error 130
to perform a manual update via PC but it didn't work, I received a model ID error (Model ID error)
I did a factory reset and tried OTA again with no luck.
I am looking for some pratical advice, Any help would be much appreciated!
Thanks,
Vincent
VincentHTC10 said:
Hi guys,
I hope you can help me solve my issue. I spend the entire evening try to do it, reading through the post on this forum but I couldn't figure out a solution.
So basically I bought an HTC 10 unlocked in Ireland, and I currently have Android 7 , no mods or anything on it.
I know there was an OTA update available, but every time I check for software updates I get the error Can't update software. There was an unexpected error and the file system may be corrupted.
I tried then to do a manual update. I download the file (ruu I think) from HTC website and I rebooted the device in download mode and tryed to install. I got error 130
to perform a manual update via PC but it didn't work, I received a model ID error (Model ID error)
I did a factory reset and tried OTA again with no luck.
I am looking for some pratical advice, Any help would be much appreciated!
Thanks,
Vincent
Click to expand...
Click to collapse
Boot to download mode, read the OS line and look for the matching ruu.zip.
Mr Hofs said:
Boot to download mode, read the OS line and look for the matching ruu.zip.
Click to expand...
Click to collapse
Hi Mr Hofs ,
OS-2.41.771.3
I should find an RUU with the same line and try the procedure again?
Yes one with the same line or a higher one, or a matching stock backup.
When you succeed to upgrade and tinker again with the device it's wise to create a pure stock backup for the future.
VincentHTC10 said:
Hi Mr Hofs ,
OS-2.41.771.3
I should find an RUU with the same line and try the procedure again?
Click to expand...
Click to collapse
Mr Hofs said:
Yes one with the same line or a higher one, or a matching stock backup.
When you succeed to upgrade and tinker again with the device it's wise to create a pure stock backup for the future.
Click to expand...
Click to collapse
Mr Hofs,
thanks for your help.
I have found this 2PS6IMG PERFUME UHL N70 SENSE80GP MR Telstra WWE 2.48.841.3 Radio [email protected] 80.07 F release 505754 partial
and it's only 105MB
Do you think this one could work?
Thanks for your help, I am not very familiar with this kind of things.
Vincent
VincentHTC10 said:
Mr Hofs,
thanks for your help.
I have found this 2PS6IMG PERFUME UHL N70 SENSE80GP MR Telstra WWE 2.48.841.3 Radio [email protected] 80.07 F release 505754 partial
and it's only 105MB
Do you think this one could work?
Thanks for your help, I am not very familiar with this kind of things.
Vincent
Click to expand...
Click to collapse
As been explained you need one with your OS number. Not some random firmware. 2.48.841 doesn't come near 2.41.771 .......
also a full ruu is at least 1.8 gig
Edit :
Especially the. 771 part has to match. The first 2.41 should match or be higher.
Mr Hofs said:
As been explained you need one with your OS number. Not some random firmware. 2.148.841 doesn't come near 2.41.771 .......
also a full ruu is at least 1.8 gig
Edit :
Especially the. 771 part has to match. The first 2.41 should match or be higher.
Click to expand...
Click to collapse
I thought it was 2.48 hence higher, didn't see the 1
The closer I could find online is 2.41.041.4 which is lower than the one that I have so I guess is not good.
Is there other way to do it ? a work around?
My phone is running at the moment I don't know why some files got corrupted.
VincentHTC10 said:
I thought it was 2.48 hence higher, didn't see the 1
The closer I could find online is 2.41.041.4 which is lower than the one that I have so I guess is not good.
Is there other way to do it ? a work around?
My phone is running at the moment I don't know why some files got corrupted.
SN:
IMEI
Click to expand...
Click to collapse
DELETE your imei and SN ASAP. that's never ment to be on an online platform!
Second option is to pay for S-OFF via sunshine and convert the device to wwe which has all RUU files available.
And as i explained allready and will do that again, your 771 part has to MATCH so it can't be 041 or 401 or 841 it MUST be. 771. So either 2.41.771 or 3.16.771 or 3.18.771 (as examples)
Mr Hofs said:
DELETE your imei and SN ASAP. that's never ment to be on an online platform!
Second option is to pay for S-OFF via sunshine and convert the device to wwe which has all RUU files available.
And as i explained allready and will do that again, your 771 part has to MATCH so it can't be 041 or 401 or 841 it MUST be. 771. So either 2.41.771 or 3.16.771 or 3.18.771 (as examples)
Click to expand...
Click to collapse
Thanks for your clarifications, Mr Hofs.
Yesterday evening I was able to find and buy this firmware 2PS6IMG_PERFUME_UHL_O80_SENSE90GP_MR_H3G_UK_3.18.771.1[email protected]_84.09_F_release_519646_signed.zip
that according to your explanation should be a good fit.
I downloaded the file on my pc and then I followed a guide to try and install it using "adb and fastboot" but when I gave the comand to run it and I received an error that the file was too big and the adb crashed as well, so I wasn't able to try to install it on the phone. I saw there are many different guides online. Do you know if there s a good one that works ?
Thanks for your help!
Vincent
VincentHTC10 said:
Thanks for your clarifications, Mr Hofs.
Yesterday evening I was able to find and buy this firmware 2PS6IMG_PERFUME_UHL_O80_SENSE90GP_MR_H3G_UK_3.18.[email protected]_84.09_F_release_519646_signed.zip
that according to your explanation should be a good fit.
I downloaded the file on my pc and then I followed a guide to try and install it using "adb and fastboot" but when I gave the comand to run it and I received an error that the file was too big and the adb crashed as well, so I wasn't able to try to install it on the phone. I saw there are many different guides online. Do you know if there s a good one that works ?
Thanks for your help!
Vincent
Click to expand...
Click to collapse
Yep should be great. You have to rename the ruu.zip to 2PS6IMG.zip only and copy it to your SDcard. Boot to download mode and follow the flash instructions. The file will be auto detected. Be aware that this will wipe the ENTIRE phone.
Edit :
You said "buy" ? Now i am wondering where you bought it and how much you payed for it ?
Mr Hofs said:
Yep should be great. You have to rename the ruu.zip to 2PS6IMG.zip only and copy it to your SDcard. Boot to download mode and follow the flash instructions. The file will be auto detected. Be aware that this will wipe the ENTIRE phone.
Edit :
You said "buy" ? Now i am wondering where you bought it and how much you payed for it ?
Click to expand...
Click to collapse
yes, I bought it for 3$ on firmware.gem-flash.com They have plenty of firmware there was also the 2.41.771.3 version.
I thought better pay 3$ than 25$ to buy the license for sunshine.
..Let`s see if it works now, finger crossed
VincentHTC10 said:
yes, I bought it for 3$ on firmware.gem-flash.com They have plenty of firmware there was also the 2.41.771.3 version.
I thought better pay 3$ than 25$ to buy the license for sunshine.
..Let`s see if it works now, finger crossed
Click to expand...
Click to collapse
I get few errors as well here
End ui_updating, press power key to continue
it says
12 RU_ZIP_ERROR
12 RU_ZIP_ERROR
FAIL12 RU_ZIP_ERROR
press power to continue (it shuts the phone )
when I restart everything as usual.
Do you think I should try with the original firmware? ( I can have it with another 3$ )
VincentHTC10 said:
I get few errors as well here
End ui_updating, press power key to continue
it says
12 RU_ZIP_ERROR
12 RU_ZIP_ERROR
FAIL12 RU_ZIP_ERROR
press power to continue (it shuts the phone )
when I restart everything as usual.
Do you think I should try with the original firmware? ( I can have it with another 3$ )
Click to expand...
Click to collapse
Dude - stop wasting your money on that website. All the files are available here @ XDA (nearly all!) for free via links already posted or by asking.
The RU_FAILED is because the file you got doesnt match the CID of your phone. The CID is basically the Network Lock on the phone - dont get confused with Sim Lock.
Go on Google Playstore and install; Simple CID Getter. Let us know here what it says. e.g; HTC_001 (Mines H3G_001 which is 3 UK Network)
Then we can get you further along.....
alchemist83 said:
Dude - stop wasting your money on that website. All the files are available here @ XDA (nearly all!) for free via links already posted or by asking.
The RU_FAILED is because the file you got doesnt match the CID of your phone. The CID is basically the Network Lock on the phone - dont get confused with Sim Lock.
Go on Google Playstore and install; Simple CID Getter. Let us know here what it says. e.g; HTC_001 (Mines H3G_001 which is EE Network)
Then we can get you further along.....
Click to expand...
Click to collapse
alchemist83 thanks for your suggestions. Here is my CID: H3G__003 ( 3 network)
Waiting for instruction :angel:
VincentHTC10 said:
alchemist83 thanks for your suggestions. Here is my CID: H3G__003 ( 3 network)
Waiting for instruction :angel:
Click to expand...
Click to collapse
So thats your pain in the arse (3 network! Me too - UK!)
Currently there does NOT seem to be any RUU for our networks.
Only way forward for both of us it would seem is to S-Off via Sunshine.
If you have already - then sweet, you can change your CID to 11111111 which will mean you can flash that zip you got and it will work.
Search or ask here on XDA about changiing CID to 11111111. Plenty have done before, so shouldnt be too hard for you.
I havent done it since HTC M7 so I cant remember, need to look it up myself.
Hope that helps!
alchemist83 said:
So thats your pain in the arse (3 network! Me too - UK!)
Currently there does NOT seem to be any RUU for our networks.
Only way forward for both of us it would seem is to S-Off via Sunshine.
If you have already - then sweet, you can change your CID to 11111111 which will mean you can flash that zip you got and it will work.
Search or ask here on XDA about changiing CID to 11111111. Plenty have done before, so shouldnt be too hard for you.
I havent done it since HTC M7 so I cant remember, need to look it up myself.
Hope that helps!
Click to expand...
Click to collapse
ahahah good to know!
So I understand what you say.. but what if I pay 3$ and download the exact firmware that I have at the moment 2PS6IMG_PERFUME_UHL_N70_SENSE80GP_MR_H3G_UK_2.41.771.31_[email protected]_79.07_F_release_509479_combined_signed.zip
After that (once the file system is no longer corrupted) I could try to do an OTA update
It would be too easy so maybe the problem is that I can`t be sure that firmware is for 3 network right?
VincentHTC10 said:
ahahah good to know!
So I understand what you say.. but what if I pay 3$ and download the exact firmware that I have at the moment 2PS6IMG_PERFUME_UHL_N70_SENSE80GP_MR_H3G_UK_2.41.771.31_[email protected]_79.07_F_release_509479_combined_signed.zip
After that (once the file system is no longer corrupted) I could try to do an OTA update
It would be too easy so maybe the problem is that I can`t be sure that firmware is for 3 network right?
Click to expand...
Click to collapse
Thats actually prob the 1 I need (if you have the file name BTW - search it in Google, for sure you might get lucky on a Download and NOT have to pay, might even find it on here XDA, theres a very good chance of that.)
For you however the need the file thats says H3G_ROI cos your CID is that. H3G__003 = H3G_ROI (Republic Of Ireland).
Mine is H3G__001 = H3G_UK. Soz bud dont think will work. You try, it will only fail or do it. It wont bust it if it does do it. S-OFF is calling you doh.... $25 about 18 pound UK.
---------- Post added at 11:39 PM ---------- Previous post was at 11:18 PM ----------
So if you do S-OFF and wanna go full OREO and have go Super CID 1111111.. whatever it is, then heres a link for WWE (Europe) RUU OREO zip for you HERE.
Rename it as you did before to 2PS6IMG etc - you've done it before lols. Best of luck
If the version number matches it's great to use. There is no RUU with 3.18.771 created for 2 different CID sets specifically. So that's not the problem. Either take the 2.41.771 (full ruu). Not only the firmware because if your OS is screwed you will be in the same boat again I remember they pulled the US ruu and they had to update the standalone firmware prior to using to the full ruu. You could check out to take the firmware from the ruu and flash it prior to the ruu.
That's done via download mode, htc ruu mode and Fastboot commands
VincentHTC10 said:
I get few errors as well here
End ui_updating, press power key to continue
it says
12 RU_ZIP_ERROR
12 RU_ZIP_ERROR
FAIL12 RU_ZIP_ERROR
press power to continue (it shuts the phone )
when I restart everything as usual.
Do you think I should try with the original firmware? ( I can have it with another 3$ )
Click to expand...
Click to collapse
---------- Post added at 04:04 AM ---------- Previous post was at 03:54 AM ----------
alchemist83 said:
Thats actually prob the 1 I need (if you have the file name BTW - search it in Google, for sure you might get lucky on a Download and NOT have to pay, might even find it on here XDA, theres a very good chance of that.)
For you however the need the file thats says H3G_ROI cos your CID is that. H3G__003 = H3G_ROI (Republic Of Ireland).
Mine is H3G__001 = H3G_UK. Soz bud dont think will work. You try, it will only fail or do it. It wont bust it if it does do it. S-OFF is calling you doh.... $25 about 18 pound UK.
---------- Post added at 11:39 PM ---------- Previous post was at 11:18 PM ----------
So if you do S-OFF and wanna go full OREO and have go Super CID 1111111.. whatever it is, then heres a link for WWE (Europe) RUU OREO zip for you HERE.
Rename it as you did before to 2PS6IMG etc - you've done it before lols. Best of luck
Click to expand...
Click to collapse
If you look at your and his original OS/firmware number the RUU should work. It's definitely not CID related at this point. They don't create 2 ruu files with the same firmware number for 2 or even more CID numbers, if you check a ruu and open the host file you will see more than 1 CID in there.
He has a matching ruu but i think it has the same issue as the US version has.
He took his OS line from the download mode, that number can't change without s-off so that's the thing you'd have to look at. It's not suddenly changing because of the CID.
Also if he had to look at h3g ROI his version number would have been different, in that case it should be 2.41.773 and not 771....... there is no H3G ROI for the HTC 10, it's integrated in the UK version range.
And also i googled some on this ruu, not easy to track or dead links or spam. So i can understand his call to buy it for 3.
If he wants to pay another 3 for the 2.41.771 than its his call. It's a big difference to 25. I can't look inside his wallet. However i share your feeling that sunshine would a more valuable investment.
Fair point Mr Hofs, I dont know enough really to be able to help fully. I need the same help to update my phone. I looked at the same place these RUU are available for $3 and they have alot more than has been listed (example; OREO update for 3 UK). I am considering downloading myself (and sharing for all!). I want to make sure I get the correct version - but I'm having trouble finding my version numbers so I get the right one. I've perhaps made it harder but using the Venom custom Rom. I've looked in about but cant find anything that makes sense. Can you advise where I can find the version numbers? Cheers
alchemist83 said:
Fair point Mr Hofs, I dont know enough really to be able to help fully. I need the same help to update my phone. I looked at the same place these RUU are available for $3 and they have alot more than has been listed (example; OREO update for 3 UK). I am considering downloading myself (and sharing for all!). I want to make sure I get the correct version - but I'm having trouble finding my version numbers so I get the right one. I've perhaps made it harder but using the Venom custom Rom. I've looked in about but cant find anything that makes sense. Can you advise where I can find the version numbers? Cheers
Click to expand...
Click to collapse
Man if your OS number is the same as mine I can share with you the file I downloaded and see if it can be useful for you at least.
I think I am gonna try to download the same version that I have at the moment as It seems an easier way than use sunshine to S-OFF and go down that way.
I ll keep you posted. Cheers