Develop Bugs

Moto G5 plus(Potter) VOLTE ISSUE after installing custom rom

Hey guys I'm sovan, lately I have been having some issues after installing a custom 8.1 rom on my device (pixel experience rom to be precise), I lost my VOLTE and couldn't get it back(my 4g lte connection was ok so I can use internet but couldn't call anyone) so I searched on some forum's regarding that issue, and I got some fixes but all of them required me to use a PC , 2 month ago I damaged my pc's motherboard so I couldn't use it fix my issue. Few days ago I downloaded magisk v16 zip and flashed that on my device after flashing it i rebooted my phone and saw I still didn't had my VOLTE back(not surprised coz thats rooting app). After that that I opened magisk app and gone to download section and looked for VOLTE disable module, after downloading and installing that module I restarted my phone and again there was no VOLTE, so I go to magisk again and uninstalled that VOLTE disable module and rebooted my phone and what u know I got my VOLTE back now I can call using VOLTE... after that happened I was a little sceptic so I power off my device and go to my bootloader using volume down plus power key and start my device and again I lost my VOLTE so I did everything what I did before installing VOLTE disable module and reboot then uninstalling that module and reboot after that I again got my VOLTE back...:fingers-crossed:
This is a temporary fix everytime u power off ur device u may lose ur VOLTE again if that happens just follow the same process....hope this helps

http://telegra.ph/Volte-Fix-For-Moto-G5-Plus-06-14-2
Sent from my XT1686 using Tapatalk

I suggest resolving VoLTE to create a back of EFS+Partition in a 7.0/7.1.2 custom rom (I personally stuck with 7.1.2 for my backups). Works like a charm when using the guide Prince153 has so generously shared.

Prince153 said:
Sent from my XT1686 using Tapatalk
Click to expand...
Click to collapse
I followed all steps that u mentioned above and did got my volte back so I restored my custom rom like u said and it works but Everytime I power off my device my volte gone,for getting it back I had to install a module or use kernal auditor and power off/on my device.(I don't have any backup of my stock rom or my efs folder).this issue keep coming back

sovanr7059 said:
I followed all steps that u mentioned above and did got my volte back so I restored my custom rom like u said and it works but Everytime I power off my device my volte gone,for getting it back I had to install a module or use kernal auditor and power off/on my device.(I don't have any backup of my stock rom or my efs folder).this issue keep coming back
Click to expand...
Click to collapse
Wait for 1-2 minutes for showing volte if it doesn't then you can turn on/off airplane mode or try enabling/disabling volte also take a backup of EFS on extsdcard
Sent from my XT1686 using Tapatalk

Prince153 said:
Wait for 1-2 minutes for showing volte if it doesn't then you can turn on/off airplane mode or try enabling/disabling volte also take a backup of EFS on extsdcard
Sent from my XT1686 using Tapatalk
Click to expand...
Click to collapse
Ok I'll try it next time I power off my phone...:good::fingers-crossed:

Prince153 said:
http://telegra.ph/Volte-Fix-For-Moto-G5-Plus-THAT-WILL-PERMANENTLY-SCREW-YOUR-PHONE!!!!
Sent from my XT1686 using Tapatalk
Click to expand...
Click to collapse
No no no no no!!!! Gosh why are people still posting this and other similar "fixes"! Do not ever flash another device's persist.
Please, this thread below is a sticky in this forum and explains why.
https://forum.xda-developers.com/g5-plus/how-to/fix-persist-resolve-imei0-explanation-t3825147

NZedPred said:
No no no no no!!!! Gosh why are people still posting this and other similar "fixes"! Do not ever flash another device's persist. QUOTE]
Hi sir, I'm I did used prince153's method to to fix my issue before, and it's still not fixed my issue so I gone back to pixel experience rom and whenever I power off my device my volte goes away(I don't have any backup of my stock files so I opted for his method).I don't really know what to do so I try not to power off my device not really flashing any roms from then.... If lose my volte try wipe cache / dalvik cache and restart my device it works sometimes...if it doesn't work I flash the pixel rom again...then my volte usually comes back,I don't any hope for me to fix this issue permanently.....
Click to expand...
Click to collapse

sovanr7059 said:
NZedPred said:
No no no no no!!!! Gosh why are people still posting this and other similar "fixes"! Do not ever flash another device's persist. QUOTE]
Hi sir, I'm I did used prince153's method to to fix my issue before, and it's still not fixed my issue so I gone back to pixel experience rom and whenever I power off my device my volte goes away(I don't have any backup of my stock files so I opted for his method).I don't really know what to do so I try not to power off my device not really flashing any roms from then.... If lose my volte try wipe cache / dalvik cache and restart my device it works sometimes...if it doesn't work I flash the pixel rom again...then my volte usually comes back,I don't any hope for me to fix this issue permanently.....
Click to expand...
Click to collapse
Sorry to say this but you shouldn't have followed prince123's method, flashing some other persist will cause permanent problems.. in case you have flashed only efs you might have a chance of full recovery.
Click to expand...
Click to collapse

npradeeppai said:
sovanr7059 said:
Sorry to say this but you shouldn't have followed prince123's method, flashing some other persist will cause permanent problems.. in case you have flashed only efs you might have a chance of full recovery.
Click to expand...
Click to collapse
I followed every step...(at that time I was kinda desperate to fix my issue).I caused permanent DMG instead of fixing it i guess,I should've known better before proceeding it's my fault.anyways thanks for all information I appreciate it...:good:
Click to expand...
Click to collapse

NZedPred said:
No no no no no!!!! Gosh why are people still posting this and other similar "fixes"! Do not ever flash another device's persist.
Please, this thread below is a sticky in this forum and explains why.
https://forum.xda-developers.com/g5-plus/how-to/fix-persist-resolve-imei0-explanation-t3825147
Click to expand...
Click to collapse
When i first flashed custom rom i lost volte then i restored with this method
What's wrong with this method
Sent from my XT1686 using Tapatalk

Prince153 said:
When i first flashed custom rom i lost volte then i restored with this method
What's wrong with this method
Sent from my XT1686 using Tapatalk
Click to expand...
Click to collapse
Read the link I posted. Section 5a talks about the false impression of success.

sovanr7059 said:
npradeeppai said:
I followed every step...(at that time I was kinda desperate to fix my issue).I caused permanent DMG instead of fixing it i guess,I should've known better before proceeding it's my fault.anyways thanks for all information I appreciate it...:good:
Click to expand...
Click to collapse
Same here i did the same
Sent from my XT1686 using Tapatalk
Click to expand...
Click to collapse

Bootloop on Fastboot..

Hi,
I have a mi max 3 with global version , i unlock it this morning.
No problem, i have installed twrp with adb, no problem.
But when i tried to install zip rom for hydrogen , installation seems to be ok but my phone to reboot correctly !
It always reboot on fastboot...
Could you help me please.
I don't know what i can doing.. (sorry for my english)
Thanks

pike31pike31 said:
Hi,
I have a mi max 3 with global version , i unlock it this morning.
No problem, i have installed twrp with adb, no problem.
But when i tried to install zip rom for hydrogen , installation seems to be ok but my phone to reboot correctly !
It always reboot on fastboot...
Could you help me please.
I don't know what i can doing.. (sorry for my english)
Thanks
Click to expand...
Click to collapse
Just because you installed this zip for hydrogen. Mi Max 3 is nitrogen. Take a look here (https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503), as it has the correct roms for the Mi Max 3.
Give preference to reinstall the rom via fastboot, because in addition to erasing everything, it resizes the partitions to the correct sizes. On the flash tool, NEVER select the "clean all and lock" option. Select the "clean all" option only.
Here is the link to the flash (https://xiaomiflashtool.com/download...-tool-20180528) - there is a more current version, but I do not use it because it always gives an error message after the installation is finished.
You can even follow this guide (https://forum.xda-developers.com/mi-max-3/how-to/b-guide-to-fake-rom-unlocked-bootloader-t3846891), but version that came on your device (the guide is just a reference for you to follow).

Thanks for your answer but i don't like MIUI ROM... is it possible to find custom rom??

pike31pike31 said:
Thanks for your answer but i don't like MIUI ROM... is it possible to find custom rom??
Click to expand...
Click to collapse
First you'd better do the process I told you to restore your device. Then you can look at how to install GSI's (since Mi Max 3 does not have specific custom roms). And remember that you can not install other roms from other devices, as it will always give an error and this may even render your device unusable. And most importantly: read carefully and follow exactly what is described in the guides, to avoid errors.
Then you can look here (https://forum.xda-developers.com/mi-max-3/how-to/guide-beginners-guide-to-gsi-aosp-rom-t3910085). It is an excellent guide on how to install GSI's

Germano1980 said:
First you'd better do the process I told you to restore your device. Then you can look at how to install GSI's (since Mi Max 3 does not have specific custom roms). And remember that you can not install other roms from other devices, as it will always give an error and this may even render your device unusable. And most importantly: read carefully and follow exactly what is described in the guides, to avoid errors.
Then you can look here (https://forum.xda-developers.com/mi-max-3/how-to/guide-beginners-guide-to-gsi-aosp-rom-t3910085). It is an excellent guide on how to install GSI's
Click to expand...
Click to collapse
I had restore my device with miflash and with the last firmware MIUI available. And now my phone works perfectly, thanks for your help.
My error was Nitrogen is not Hydrogen....

pike31pike31 said:
I had restore my device with miflash and with the last firmware MIUI available. And now my phone works perfectly, thanks for your help.
My error was Nitrogen is not Hydrogen....
Click to expand...
Click to collapse
Great it worked. Now take a look at the other guides for you to install a GSI (if you want). Always read carefully the guides you will follow. It is very important that you also read about the anti rollback in the MIUI roms. From what I see here (including me), most prefer to install the roms xiaomi.eu for not having this mechanism. It is always good to have the information so that you do not make mistakes and have problems.

How I can flash a GSI ROM for Redmi Note 8 Pro?

Hello everyone, Im trying to understand how to flash a GSI img ROM (I want to try AOSP stock, or Havoc OS) but, I saw some posts and looks like is a bit hard to do.
I had TWRP installed (unofficial begonia) and magisk installed.
some informations I found: this device is just A slot supported
What exactly I need?
Orange Fox recovery?
Before flash need to disable something in recovery?
A arm64 slot IMG?
And gapps?
What are the steps?
Im waiting your answer

So far with my personal experience trying to flash Lineage 17 GSI on my RN8Pro and have had no luck. Lost baseband and both imei #'s in the process too (still trying to figure out how to restore).

Finally was lucky!
Flash LR Team TWRP:
https://mega.nz/#!B75xWQQQ!8DQdy09luHihxCziRX7ywUWkAwmAahjnWOQDgHxcTPA
Enable debugging and make sure computer has permission to use
On command promp adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot (immediately disconnect phone and hold volume up)
In twrp go to advanced and Select "Close AVB2.0" swipe to confirm
Go back to twrp home -> Wipe -> Format
Flash gsi
And presto!
I just flashed Lineage 17 GSI as of now I wouldn't recommend it. Fixing to flash ASOP 10 GSI from phhusson see if it is any better!
Also as a favor since I lost baseband and imei for my phone could you please create a backup through twrp of your nvram and nvdata and PM it to me?
If you need any help just pm me!

JuanM2020 said:
Finally was lucky!
Flash LR Team TWRP:
https://mega.nz/#!B75xWQQQ!8DQdy09luHihxCziRX7ywUWkAwmAahjnWOQDgHxcTPA
Enable debugging and make sure computer has permission to use
On command promp adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot (immediately disconnect phone and hold volume up)
In twrp go to advanced and Select "Close AVB2.0" swipe to confirm
Go back to twrp home -> Wipe -> Format
Flash gsi
And presto!
I just flashed Lineage 17 GSI as of now I wouldn't recommend it. Fixing to flash ASOP 10 GSI from phhusson see if it is any better!
Also as a favor since I lost baseband and imei for my phone could you please create a backup through twrp of your nvram and nvdata and PM it to me?
If you need any help just pm me!
Click to expand...
Click to collapse
What problems were there with the los 17 gsi?

Please share what's working on the GSI ROM and what's not. Thank you.

polfrank said:
What problems were there with the los 17 gsi?
Click to expand...
Click to collapse
Off the bat, Bluetooth did not work it just kept giving a Bluetooth has stopped message. Didn't have face unlock. Screen would suddenly flash as if display were damaged and would suddenly freeze when opening stock apps. And a few other things I don't remember as I already flash off of it.

Helhound0 said:
Please share what's working on the GSI ROM and what's not. Thank you.
Click to expand...
Click to collapse
I've flashed Havoc OS 2.9 GSI and after resizing and disabling HW overlays the ROM works near perfectly albeit some camera issues.

JuanM2020 said:
Finally was lucky!
Flash LR Team TWRP:
https://mega.nz/#!B75xWQQQ!8DQdy09luHihxCziRX7ywUWkAwmAahjnWOQDgHxcTPA
Enable debugging and make sure computer has permission to use
On command promp adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot (immediately disconnect phone and hold volume up)
In twrp go to advanced and Select "Close AVB2.0" swipe to confirm
Go back to twrp home -> Wipe -> Format
Flash gsi
And presto!
I just flashed Lineage 17 GSI as of now I wouldn't recommend it. Fixing to flash ASOP 10 GSI from phhusson see if it is any better!
Also as a favor since I lost baseband and imei for my phone could you please create a backup through twrp of your nvram and nvdata and PM it to me?
If you need any help just pm me!
Click to expand...
Click to collapse
Of course and thanks dude. In a few hours i will attach the files.

yayimathrowaway said:
I've flashed Havoc OS 2.9 GSI and after resizing and disabling HW overlays the ROM works near perfectly albeit some camera issues.
Click to expand...
Click to collapse
Newbie here. Please let me know what is it for and how to "resizing and disabling HW overlays"

yayimathrowaway said:
I've flashed Havoc OS 2.9 GSI and after resizing and disabling HW overlays the ROM works near perfectly albeit some camera issues.
Click to expand...
Click to collapse
That sounds good. Thanks for sharing. Did you use GSI since you flashed or did you restore MIUI?

Sorry for my ignorance, but what is a GSI ROM?

montechristos1 said:
Sorry for my ignorance, but what is a GSI ROM?
Click to expand...
Click to collapse
Generic System Image. Basically a single ROM image that should technically work in any device running Android 8.1 or newer. It contains the generic AOSP (Pure android) source.

Helhound0 said:
Generic System Image. Basically a single ROM image that should technically work in any device running Android 8.1 or newer. It contains the generic AOSP (Pure android) source.
Click to expand...
Click to collapse
Thanks.
So people were able to flash LOS GSI on their Redmi Note PRO?
No specific thread for this?
(I am one of the people that are waiting for one of the custom open-source ROMs to replace the (ihmo) horrible MUI)

MarkLev said:
Newbie here. Please let me know what is it for and how to "resizing and disabling HW overlays"
Click to expand...
Click to collapse
Disabling HW Overlays means that your GPU is the only thing that will handle all of the graphics on your phone. If this is not on in some GSI ROMs the screen will flicker when it's about to go to sleep and at other random times. It can be accessed in Developer options.
Additionally, as this is a GSI made to work on many different phones, the proportions on the screen are off when you first install it. On Havoc, all of the resizing options are in Havoc Settings. In other ROMs without customization options, there are ADB commands that can resize your ROM. Specifically, the problems I initially experienced were involving the status bar icons and clock only partially being on the screen.
---------- Post added at 07:57 AM ---------- Previous post was at 07:46 AM ----------
Helhound0 said:
That sounds good. Thanks for sharing. Did you use GSI since you flashed or did you restore MIUI?
Click to expand...
Click to collapse
I am actually using the GSI right now. I didn't restore MIUI because I just did not like it. I think I'll stay on this GSI. Again, after some modifications in Settings, the ROM I'm using works near perfectly.
The cameras, of course, are kind of messed up though. No matter what camera app I use I cannot access the 64MP camera and anything other than the camera app that came with the GSI (which is pretty bad) randomly flickers the screen while I'm taking a picture or recording a video, even after disabling HW Overlays in Developer Options. Maybe could be fixed by flashing a third party camera app as a system app.
Other than that, no problems whatsoever.
---------- Post added at 08:04 AM ---------- Previous post was at 07:57 AM ----------
KonahZave said:
Hello everyone, Im trying to understand how to flash a GSI img ROM (I want to try AOSP stock, or Havoc OS) but, I saw some posts and looks like is a bit hard to do.
I had TWRP installed (unofficial begonia) and magisk installed.
some informations I found: this device is just A slot supported
What exactly I need?
Orange Fox recovery?
Before flash need to disable something in recovery?
A arm64 slot IMG?
And gapps?
What are the steps?
Im waiting your answer
Click to expand...
Click to collapse
If you still need some help, I have a full guide on how to flash here

yayimathrowaway said:
I am actually using the GSI right now. I didn't restore MIUI because I just did not like it. I think I'll stay on this GSI. Again, after some modifications in Settings, the ROM I'm using works near perfectly.
The cameras, of course, are kind of messed up though. No matter what camera app I use I cannot access the 64MP camera and anything other than the camera app that came with the GSI (which is pretty bad) randomly flickers the screen while I'm taking a picture or recording a video, even after disabling HW Overlays in Developer Options. Maybe could be fixed by flashing a third party camera app as a system app.
Other than that, no problems whatsoever.
Click to expand...
Click to collapse
I don't really mind the cameras not working at a 100% tbh since i don't use them that much. However did you try GCam on GSI or any other API2 camera app?

Helhound0 said:
I don't really mind the cameras not working at a 100% tbh since i don't use them that much. However did you try GCam on GSI or any other API2 camera app?
Click to expand...
Click to collapse
Yeah, but the screen flashes randomly on them.
CameraMX works great with the cameras that it does support. CameraF5-V crashes randomly. GCam for RN8P can only take photos, and only supports 2 cameras. I think that some of these issues would be fixed if I flashed then as system apps, because the stock camera app works fine, albeit the fact that it's just not a very good camera app.

[ROM][UNOFFICIAL][W.I.P]LineageOS for Redmi Note 9S/9Pro[curtana/joyeuse]

tldr; use the LeddaZ build
Downloads:
ROM
Lineage Recovery
Hello XDA,
I'm posting a build using the unified curtana build code that's on github. I have a joyeuse (9 Pro) so I can't really test it on the 9S (curtana). I've been testing it out for a couple of days and haven't had any bugs other than status bar centered items.
Bugs / not working / To do:
Wireguard support Added 18-Sept
Play Store certification (Workaround using MagiskHide Props Config)
64 MP camera module seems to work only with the ANX Camera ver 185(not included). You must manually add all permissions.
Status bar text around the front camera
Code:
Source Code: https://github.com/LineageOS
Device: https://github.com/xiaomi-sm6250-devs/android_device_xiaomi_curtana-unified
Kernel: https://github.com/xiaomi-sm6250-devs/android_kernel_xiaomi_sm6250
Vendor: https://gitlab.com/m0sin/proprietary_vendor_xiaomi_curtana

Play Store certification: Have you tried with the latest gapps yet?

How to install? Anything I need to look at?

dungphp said:
Play Store certification: Have you tried with the latest gapps yet?
Click to expand...
Click to collapse
I have, it might be Magisk or I'm not hiding it properly.
Edit: I used the Magisk HideProps module and everything works fine now. I think the naming, curtana vs joyeuse and version number were causing the issue.

glurak888 said:
How to install? Anything I need to look at?
Click to expand...
Click to collapse
If you are coming from stock, I installed the Lineage recovery, installed the ROM. After it rebooted, I went back to install OpenGapps and Magisk.
I tried going from stock using Pbrp but it failed for me. After Lineage was installed, PBRP worked fine.

I have just installed it, anything I should know?

Installed successful on
Note pro 9 a Joyeuse (global) with 64mp cam , nfc and Lte aka a M2003J6B2G
Only recovery from lineage worked for me ... it also enables fastbootd !!
Rooting with magiskmanager wasnt possible via patching boot.img but flashing Magisk-v20.4.zip via recovery worked .
nfc works too
fastcharge seems so work fine ...
lte seems to work too
will try anx cam and 64 mpx tomorrow ... //edit - ANXCameraUnity_185.SaltyIntelligentPlainsqueaker and 48MPFixQ_170.SophisticatedFatBetafish make it work too ....
thx

I installed the ANXCameraUnity_185.SaltyIntelligentPlainsqueaker.zip and the camera app crash all time. Should I install and the 48MPFixQ_170.SophisticatedFatBetafish.zip?
Thank you for this nice rom, keep walking.

[email protected] said:
I installed the ANXCameraUnity_185.SaltyIntelligentPlainsqueaker.zip and the camera app crash all time. Should I install and the 48MPFixQ_170.SophisticatedFatBetafish.zip?
Thank you for this nice rom, keep walking.
Click to expand...
Click to collapse
Yes, install the 48 MP Fix to add the 48 MP camera. It's crashing because you need to manually fix the permissions on the app. After you allow everything it'll crash once then work fine.

Minor update:
September security patch
Added wireguard kernel support 1.0.20200908

moffa~ said:
If you are coming from stock, I installed the Lineage recovery, installed the ROM. After it rebooted, I went back to install OpenGapps and Magisk.
I tried going from stock using Pbrp but it failed for me. After Lineage was installed, PBRP worked fine.
Click to expand...
Click to collapse
so basically we flash on joyeuse a curtana recovery in order to flash a curtana rom and then we flash back the joyeuse recovery right?

didicola said:
so basically we flash on joyeuse a curtana recovery in order to flash a curtana rom and then we flash back the joyeuse recovery right?
Click to expand...
Click to collapse
Not sure I understand what you are saying. The build is joyeuse/curtana unified. I don't like not being able to flash zips without sideloading so I'm using the PBRP recovery. For the initial flash I used my PC and the Lineage Recovery.

Are the gapps included or do we need to flash them?

kalehrl said:
Are the gapps included or do we need to flash them?
Click to expand...
Click to collapse
Not included. Must be flashed.

Excellent rom, I have used it since its publication, and so far no problem. The performance of the battery seems to me outstanding, and to this day, it is the only one in which an indispensable application for me (Sony Music) works without problem. I hope the excellent work continues, and it even became an official version. Thanks!

I use redmi note 9s, can i flash this rom?

vanmaitrangchu said:
I use redmi note 9s, can i flash this rom?
Click to expand...
Click to collapse
Theoretically yes. Please share your experience if you try it out.

moffa~ said:
Theoretically yes. Please share your experience if you try it out.
Click to expand...
Click to collapse
When i used mi note 3, lineage is bettest rom for me. But it is officical. with mi note 9s (4/64) i got few bug, i try test it again.
first day i got:
when flash, i have some problem, but it easy, forget it. after that i reboot system, 2 minute its done. reboot to recovery to flash gapp (nano), reboot, but i can sync adress from google .
Try again, i wipe all data (rom in sd card), flash again. reboot device, wait rom instal, reboot recovery, flash gapp again, reboot, it ok :v i dont know why!
some thing i dont like with rom:
- dial not support dual sim, mean: icon sim1 sim2 when use dial pad. i use 2 sim.
- swicht speaker too much make phone restart (im shiper, i usally switch), it make me crazy.
- no 1 hand mod, i ussally use it with 1 hand, to big to use.
And else i like this rom, from mi note 3.
Sorry, my english very bad! I hope offical soon, thanks so much!

vanmaitrangchu said:
When i used mi note 3, lineage is bettest rom for me. But it is officical. with mi note 9s (4/64) i got few bug, i try test it again.
first day i got:
when flash, i have some problem, but it easy, forget it. after that i reboot system, 2 minute its done. reboot to recovery to flash gapp (nano), reboot, but i can sync adress from google .
Try again, i wipe all data (rom in sd card), flash again. reboot device, wait rom instal, reboot recovery, flash gapp again, reboot, it ok :v i dont know why!
some thing i dont like with rom:
- dial not support dual sim, mean: icon sim1 sim2 when use dial pad. i use 2 sim.
- swicht speaker too much make phone restart (im shiper, i usally switch), it make me crazy.
- no 1 hand mod, i ussally use it with 1 hand, to big to use.
And else i like this rom, from mi note 3.
Sorry, my english very bad! I hope offical soon, thanks so much!
Click to expand...
Click to collapse
Thanks for testing it out.
Unfortunately, I don't have a second sim card to test it with.
I have no problem using the speaker phone at all. Could you grab the logs, maybe I can look into it.
It looks like one-hand mode was removed from Lineage. There are gestures for navigation. It works about 90% of the time for me.
------Edit-------
I tested my phone out with a second sim card today and had no issues. Is anyone else having issues with a second sim card?

moffa~ said:
Thanks for testing it out.
Unfortunately, I don't have a second sim card to test it with.
I have no problem using the speaker phone at all. Could you grab the logs, maybe I can look into it.
It looks like one-hand mode was removed from Lineage. There are gestures for navigation. It works about 90% of the time for me.
------Edit-------
I tested my phone out with a second sim card today and had no issues. Is anyone else having issues with a second sim card?
Click to expand...
Click to collapse
The problem occurs when turning on the speakerphone while calling. End of the call without turning off the speakerphone, the next call will easily lose sound. Ratio 1/5. Trying to turn on and off the speakerphone is very easy to reset the device.
Regarding the 2 sim issue: I mean there is no separate button for the 2 sims in the dial pad. Like the dial pad of the EU version, very convenient.
I need one hand mod, too hight with my hand. like picture.

Tested GSI List for the Nord N10 5G

Decided a list might be nice to have for those interested in flashing GSI Images
All these GSI's I've tested on a BE2026 Lito, but I'd assume its the same for other models. As long as you can unlock bootloader anyway
GSI List
Havok OS
-- Android 10
-- Pros: Reads SIM cards, wifi functions, bluetooth works, camera works, everything works
-- Cons: Once you flash Magisk using custom recovery, it only boots to bootloader, GAPPS won't flash, had to debrick device after this...
/e/OS DeGoogled GSI
-- Android 10
-- Pros: Wifi/Bluetooth/Camera and system work. Magisk flash with custom recovery works
-- Cons: Doesn't read sim cards at all, Screen stays exceptionally bright at all times even at 0% brightness
LeOS DeGoogled GSI
-- Android 10 and Android 11
-- Pros: Same as /e/OS
-- Cons: Same as /e/OS
DotOS GSI
-- Android 11
-- Pros: Not really any lol
-- Cons: Upon initial boot ,screen flashes, System Force Closes, screen is black. Unusable
Android 12 GSI from Google
-- Android 12
-- Never Boots
crDroid GSI
-- Android 11
-- Pros: nothin
-- Cons: have to delete product_a and _b slot partitions to resize for it to function, never boots, kicks you back to bootloader
- currently flashing

Android 12 if it works I also have a list give me time but some roms need permissiver.zip

Huh did not know of that. Know a fix for issues with SIM Card not being seen at all? /e/OS does it to me on every device I flash it to. I've seen people say to flash back to stock then flash an A-Only GSI, sometimes that fixes the SIM issue
EduardoA3677 said:
Android 12 if it works I also have a list give me time but some roms need permissiver.zip
Click to expand...
Click to collapse

KaptinBoxxi said:
Huh did not know of that. Know a fix for issues with SIM Card not being seen at all? /e/OS does it to me on every device I flash it to. I've seen people say to flash back to stock then flash an A-Only GSI, sometimes that fixes the SIM issue
Click to expand...
Click to collapse
It may be a problem with the vendor or kernel, I could compile but my laptop broke down and renting a server is very expensive in my country

KaptinBoxxi said:
Huh did not know of that. Know a fix for issues with SIM Card not being seen at all? /e/OS does it to me on every device I flash it to. I've seen people say to flash back to stock then flash an A-Only GSI, sometimes that fixes the SIM issue
Click to expand...
Click to collapse
Ok, you have telegram, it makes me a bit uncomfortable to write here

EduardoA3677 said:
Ok, you have telegram, it makes me a bit uncomfortable to write here
Click to expand...
Click to collapse
Don't have anything except Discord, Twitter and FB, but I generally only share my discord.
I'm thinking something's just missing from the ROMs, since it works with Havok ROM and such

KaptinBoxxi said:
Don't have anything except Discord, Twitter and FB, but I generally only share my discord.
I'm thinking something's just missing from the ROMs, since it works with Havok ROM and such
Click to expand...
Click to collapse
How did you get HavocOS to boot? This specific image never seems to boot no matter what I do. Did you flash any fixes or did it just boot up first time?

Generic123. said:
How did you get HavocOS to boot? This specific image never seems to boot no matter what I do. Did you flash any fixes or did it just boot up first time?
Click to expand...
Click to collapse
Flash this after installing the gsi

KaptinBoxxi said:
Don't have anything except Discord, Twitter and FB, but I generally only share my discord.
I'm thinking something's just missing from the ROMs, since it works with Havok ROM and such
Click to expand...
Click to collapse
Hi need your help

EduardoA3677 said:
Flash this after installing the gsi
Click to expand...
Click to collapse
Permissiver on this phone for every rom so far just kicks me back to fastboot.

KaptinBoxxi said:
Decided a list might be nice to have for those interested in flashing GSI Images
All these GSI's I've tested on a BE2026 Lito, but I'd assume its the same for other models. As long as you can unlock bootloader anyway
GSI List
Havok OS
-- Android 10
-- Pros: Reads SIM cards, wifi functions, bluetooth works, camera works, everything works
-- Cons: Once you flash Magisk using custom recovery, it only boots to bootloader, GAPPS won't flash, had to debrick device after this...
/e/OS DeGoogled GSI
-- Android 10
-- Pros: Wifi/Bluetooth/Camera and system work. Magisk flash with custom recovery works
-- Cons: Doesn't read sim cards at all, Screen stays exceptionally bright at all times even at 0% brightness
LeOS DeGoogled GSI
-- Android 10 and Android 11
-- Pros: Same as /e/OS
-- Cons: Same as /e/OS
DotOS GSI
-- Android 11
-- Pros: Not really any lol
-- Cons: Upon initial boot ,screen flashes, System Force Closes, screen is black. Unusable
Android 12 GSI from Google
-- Android 12
-- Never Boots
crDroid GSI
-- Android 11
-- Pros: nothin
-- Cons: have to delete product_a and _b slot partitions to resize for it to function, never boots, kicks you back to bootloader
- currently flashing
Click to expand...
Click to collapse
I'm using Corvus 16.7 and everything works just fine EXCEPT connecting a headset or a speaker. I can't do it no matter if I use a cable or via Bluetooth, which is a shame because I use to listen to music that way.
Everything else works fantastic, so I don't have regrets.

bbabel said:
I'm using Corvus 16.7 and everything works just fine EXCEPT connecting a headset or a speaker. I can't do it no matter if I use a cable or via Bluetooth, which is a shame because I use to listen to music that way.
Everything else works fantastic, so I don't have regrets.
Click to expand...
Click to collapse
Ever since the Android 11 update went through, even if I use the debricking Android 10 software to go back, no gsi boots at all. Even GSI's I had that were working.

Yesterday I tested Android 12 AOSP GSI+GMS on my N10 5G. It works, but 90hz needs to be set from adb, biometrics won't work at all (build.prop might need edits) and 5G cannot be enabled. LTE, 3G and 2G works, calls work, WiFi & Bluetooth works, camera works and audio works.
I think that the issue is on build.prop. Also you need to install proper vbmeta.img so it can boot.

UsedNametag said:
Yesterday I tested Android 12 AOSP GSI+GMS on my N10 5G. It works, but 90hz needs to be set from adb, biometrics won't work at all (build.prop might need edits) and 5G cannot be enabled. LTE, 3G and 2G works, calls work, WiFi & Bluetooth works, camera works and audio works.
I think that the issue is on build.prop. Also you need to install proper vbmeta.img so it can boot.
Click to expand...
Click to collapse
I've had this bookmarked for when I had my laptop working.
https://developer.android.com/topic/dsu
Seems we have the ability to add gsi images and everything.

I'll try Pixel 5 Android 12 Beta 4.1 firmware GSI port too, maybe more stuff works.

UsedNametag said:
Yesterday I tested Android 12 AOSP GSI+GMS on my N10 5G. It works, but 90hz needs to be set from adb, biometrics won't work at all (build.prop might need edits) and 5G cannot be enabled. LTE, 3G and 2G works, calls work, WiFi & Bluetooth works, camera works and audio works.
I think that the issue is on build.prop. Also you need to install proper vbmeta.img so it can boot.
Click to expand...
Click to collapse
Did you use the DSU or did you install something using this method?

MetaruSonikkuX said:
Did you use the DSU or did you install something using this method?
Click to expand...
Click to collapse
I used GSI installation tutorial from this forum. Also issues on GSI might be possible to solve, but I have no idea how...

I've totally forgotten to update about my GSI experience on this phone. Pixel 5 port didn't work properly, but I haven't tried any Phh-Treble images yet.

a(11)-a(12) gsi+gms dsu loader worked fine (its the 'easy' button for flashing)on N10 5G (w/unlocked bootloader).but i noticed my storage space was reduced to like 8 or 9gb,(tryin to recall but i flashed back as soon i saw it).and then almost corupted my sd card.. or it misread it. cant remember if it wiped my phone(it was already wiped)or id just flash back over,but setting up phone again and again sucks.man,i got the memory of a goldfish

limitlessbydesi9n said:
a(11)-a(12) gsi+gms dsu loader worked fine (its the 'easy' button for flashing)on N10 5G (w/unlocked bootloader).but i noticed my storage space was reduced to like 8 or 9gb,(tryin to recall but i flashed back as soon i saw it).and then almost corupted my sd card.. or it misread it. cant remember if it wiped my phone(it was already wiped)or id just flash back over,but setting up phone again and again sucks.man,i got the memory of a goldfish
Click to expand...
Click to collapse
Hm I might have to try this out out of boredom. Mind sharing where you found dsy loader? Never heard of it is it specifically for the N10 5g or just a global tool? Oh yeaahhh, I'd also say my memories are about the same. It's from all that reefer mann.