Related
Hi everyone
Well im a type of guy who thinks that knows everything thats why im in problems right now. So i was using MIUI 10 beta since the first day it came out and i love it with weekly updates and noticable changes. Yesterday i saw that i can install Android P on my whyred i was pretty happy so i decided to try it today. I flashed everything and Android P worked like charm on my whyred.
But i wanted to go back to MIUI 10 and i was trying to flash using twrp but at the end i lost everything on my phone including OS. Then i downloaded MIUI 10 8.7.12 to flash it with MIFlash and i got the "Anti-Rollback" error. I found some toolkit on MIUI forum to remove anti-rollback so i tried again to flash rom but MIUI V.9.5.4.0 and it started to flash. Flash went good and it was completed but my phone turned off and its completly dead. No chance to turn it on or even to go in fastboot mode.
I dont really think that anyone can save it but if anyone heard or had that problem i will be so thankful if you could help! :fingers-crossed:
Have you try this?
https://forum.xda-developers.com/re...tutorial-unbrick-redmi-note-5-whyred-t3816260
I found some toolkit on MIUI forum to remove anti-rollback
Click to expand...
Click to collapse
There is no reported tool that can do that!
If it is the tool, I'm thinking of, it only allows unloking fastboot on ARP, so you can flash TWRP!
AlishaSama said:
Have you try this?
https://forum.xda-developers.com/re...tutorial-unbrick-redmi-note-5-whyred-t3816260
Click to expand...
Click to collapse
Thanks i will try. My pc can see my phone as "qusb_bulk" and i searched a little bit and i found out that is hard bricked so actually there is a way to fix this.
Dear seems that you flashed ARB 3 rom on ARB 4 enabled device
So hard bricked now you need mi authentication authorization to flash the latest rom.
All hard bricked users waiting for their permission from xiaome.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CLICK HERE TO READ THE MEGATHREAD BEFORE DOING ANYTHING TO YOUR DEVICE
Here we are guys... After searching here and there i found some working ways to Root this device without getting bricked. So let's discuss about these :
1. UNLOCKING BOOTLOADER :
- Download the Mi Unlock app to PC, and sign in with your Mi Account;
- Enable Developer Option in your phone by tapping the "Build Number" 7 times
- Go to Developer Options "Settings > Additional Settings > Developer Options
- Enable USB Debugging and OEM Unlocking
- Aslo add account in Mi Unlock Status (Can be found in Developer Options
- Install all the required drivers (adb drivers, vcom drivers etc.) In your PC [I'll link these below]
- Shut down your phone manually, and hold Volume down key and Power button to enter Fastboot mode
- Connect your phone to PC using USB cable and click "Unlock". In Mi Unlock Tool
- You will be given a specific time (168 hours mostly)
- Wait until that and redo Unlock process
- Woah you have Unlocked your device
2. FLASHING TWRP :
- Install Minimal ADB and fastboot on your PC [Link will be provided below]
- Download LR Team TWRP [This work for now, I'll provide link below and will update it after we have another proper TWRP]
- Put that TWRP in the file location of ADB and Fastboot (Right click on Minimal ADB and Fastboot icon on desktop and click on Open file location)
- rename that recovery to "twrp" for convenience (optional)
- Now Connect your phone to PC With USB Debugging on (keep phone on).
- Type
Code:
adb devices
and accept the pop up on phone's screen.
- Now reboot your phone to Fastboot mode
- Type
Code:
fastboot devices
- Your device ID will be visible on Screen.
- Then type
Code:
fastboot flash recovery twrp.img
- When it's done, Remove cable and Hold Power + Vol. Up when phone starts turning on leave the power button but keep pressing Vol. UP until TWRP splash Screen shows up.
- Done U did it
3. ROOTING :
- In TWRP mount System
- Go to Advanced > file manager
- then go to system_root > system and delete "recovery-from-boot.p"
- Go home and again go to advanced and Select "Close AVB2.0" swipe to confirm.
- Go back and select "Install Root"
- Here you go magisk 19.4 will be installed (U can chose any other versions afterwards.)
- Reboot the device to system.
- Ah Yes you did it
In case anything goes wrong ask me here or in official telegram group
LINKS
1. Mi Unlock tool
2. Minimal ADB and Fastboot
3. ADB Drivers for MTK
4. MTK USB Drivers
5. LR Team TWRP
If this helped you then hit the Thanks Button. Good Luck
Does it work for the china edition of the phone?
These are the the same instructions as found here https://forum.xda-developers.com/showpost.php?p=80604223&postcount=2
Why create a new thread without giving any credits. It's cluttering the forum.
In case anything goes wrong ask me here or in official telegram group
Click to expand...
Click to collapse
Reported, read the FAQ about telegram.
donkyshot said:
These are the the same instructions as found here https://forum.xda-developers.com/showpost.php?p=80604223&postcount=2
Why create a new thread without giving any credits. It's cluttering the forum.
Reported, read the FAQ about telegram.
Click to expand...
Click to collapse
Ah ok...i didn't check that thread... I just searched here and there and created a simple guide...
Robstir said:
Yes it does, I just rooted mine, Chinese 8gb RAM with Chinese ROM (no Google) only problem I just found was - can't make a TWRP back up on either storage, says can't make the folder, key unavailable.
I tried a couple of other methods which didn't work, so great stuff for posting here, I don't use Telegram, so it's really helped me, even if it is a duplicate, wind your neck in with the reporting Donkeywhatever!
Thanks OP
Click to expand...
Click to collapse
I'm glad to hear that it helped you...
Robstir said:
Thanks, it did brilliantly, any advice on the TWRP can't make the backup folder?
I'm keen to start pruning the system of the useless Xiaomi bloatware but not without a backup, flashed Magisk 20.1 also, working perfectly.
Click to expand...
Click to collapse
Wait for a proper TWRP. Cuz devs are already working on it
anybody tried that with chinese phone swapped to global rom?
Robstir said:
Yes it does, I just rooted mine, Chinese 8gb RAM with Chinese ROM (no Google) only problem I just found was - can't make a TWRP back up on either storage, says can't make the folder, key unavailable.
I tried a couple of other methods which didn't work, so great stuff for posting here, I don't use Telegram, so it's really helped me, even if it is a duplicate, wind your neck in with the reporting Donkeywhatever!
Thanks OP
Click to expand...
Click to collapse
Erm the issue i have with ChinaRom is that I cant use my own homescreen launcher... even with root I cant bypass it... so I have to be on Global ROM... but china variant with global rom causes boot loop.... and seeing that you are using the only TWRP available i think the results are the same...
---------- Post added at 05:42 AM ---------- Previous post was at 05:42 AM ----------
pritish1998 said:
Wait for a proper TWRP. Cuz devs are already working on it
Click to expand...
Click to collapse
Oo really? Gee can't wait....
so always bootloop issue with china/global device?
Bricked my China Rom Phone
I just bricked my phone - story here:
https://forum.xda-developers.com/redmi-note-8-pro/help/help-to-unbrick-china-redmi-note-8-pro-t4004681
So does anyone have any idea how I can unbrick? Should I REM out the antirollback check lines in flash_all.bat?
Any help is much appreciated! Thank you!
My phone came with the Global EU (EEA) version ROM, i have flashed Global (MI) version. Will this method still work or will it cause bootloop? I don't want to brick my device so asking in advance. I was lucky to just get stuck in bootloop with my previous try using a different recovery.
P.S. I used MiFlash Tool and flashed the ROM through Fastboot.
Hey Pritish1998,
I must admit, I was a little leery, after reading all the other threads about installing twrp and rooting and the horror stories they contained. Well, your instructions seemed fairly simple. I followed them EXACTLY... and I lost my ass, everything got wiped, my imei, everything!!!
Totally kidding, everything worked perfectly, I followed your steps exactly as stated. I did not loose any data, nothing, every app, all my downloads, everything is still on my phone. THANK YOU SO MUCH!
Also, TWRP, is still installed, didn't get wiped out by the stock recovery. I have root, and oh, I am on MIUI Global, on the United States phone I ordered off of Amazon. More Specifically, MIUI Global 11.0.1.0(PGGMIXM) Android Version 9 PPR1.180610.011. I received the MIUI 11 update about 3 days ago, and was still waiting the 160 some hours out for the bootloader unlock. I just got the bootloader unlocked about 3 hours ago. Went through numerous instructions and posts and this one seemed to make the most sense. I wasn't sure about MIUI 11 working, but fudge it, I thought I would just return the phone if I had a problem, but nope, you're instructions were clear and precise and I followed them to a tee and its working great and I have Magisk and did the safetynet update, and I'm all good.
I haven't updated Magisk to 20.1 though. Didn't want to press my luck.
Thanks so much bro, really, thank you.
this procedure worked as well on an indonesian 11.0.1. rom!!!
thx!
Hello good day! I have a question about TRWP:
1) Is it safe to install this TRWP f I am on 11.0.1.0 PGGEUXM?
Has anyone else done it since rom EEA instead of Gobal (MI)?
Thank you
Thank you very much, magisk works perfectly
donkyshot said:
These are the the same instructions as found here https://forum.xda-developers.com/showpost.php?p=80604223&postcount=2
Why create a new thread without giving any credits. It's cluttering the forum.
Reported, read the FAQ about telegram.
Click to expand...
Click to collapse
NOTHING WRONG WITH THE ABOVE POST BUT MORE INFORMATIVE. The link you claimed to be original is for the Chinese device only not for the Global. TWRP is also different. Check the files.
neoxcool said:
NOTHING WRONG WITH THE ABOVE POST BUT MORE INFORMATIVE. The link you claimed to be original is for the Chinese device only not for the Global. TWRP is also different. Check the files.
Click to expand...
Click to collapse
No need for caps lock. We can read.
It was initially a double post he just edited it later and changed it to a guide, which is fine.
It's the same procedure like initial Chinese twrp which was and is already posted here.
I'm on xiaomi.eu beta Android 10 but now i can't boot the recovery, any ideas?
.
Martin213 said:
You can't boot to stock recovery?
Be careful now i think you're one step ahead brick...
Click to expand...
Click to collapse
Phone is working normally but i want to change to stable, but the recovery is not booting.
Hey guys
Just saw that the first Miui 12 from xiaomi.eu for many devices is out. Quite exited and going to install it.
https://xiaomi.eu/community/threads/20-4-30-first-miui-12.55390/
Have fun!
I have the file and can upload it if anyone struggling to download it. It took me all day.
thefiqs said:
I have the file and can upload it if anyone struggling to download it. It took me all day.
Click to expand...
Click to collapse
Do you have the file for the MI MIX 3? Can you please upload it?
Vieira19 said:
Do you have the file for the MI MIX 3? Can you please upload it?
Click to expand...
Click to collapse
Yeah I do. Sure, give the upload some time.
https://drive.google.com/file/d/1l0Mw_cYBCiI2sU57l89enndWBCLEtAZo/view?usp=sharing
Work pretty well for a first beta, i have some freeze and have to reboot once a day, but it's daily usable
Znuf said:
Work pretty well for a first beta, i have some freeze and have to reboot once a day, but it's daily usable
Click to expand...
Click to collapse
Dirty flash over 11?
Yep
New version work like a charm ?
Hi, is there some tutorial, or youtube video, or some guide, on how to instal Xeu on Mix 3? Would be much appreciated, cause i never tried doing something like this.
Nikola_zr said:
Hi, is there some tutorial, or youtube video, or some guide, on how to instal Xeu on Mix 3? Would be much appreciated, cause i never tried doing something like this.
Click to expand...
Click to collapse
I'm sure there are videos out there but it's actually not relatively difficult:
Unlock bootloader (Google Xiaomi bootloader unlock, it's an official thing Xiaomi offers) [THIS WILL COMPLETELY WIPE YOUR PHONE]
Install TWRP custom recovery (you can find guides on this forum)
Boot to TWRP
Go to Wipe > Factory Reset & Format Data (if coming from a non-Xiaomi.eu ROM)
Copy Xiaomi.eu ROM (from https://xiaomi.eu/community/threads/20-5-14.55760/) for the Mix 3 to internal storage
Go to Install > Flash ROM you just copied
(Not sure if this is necessary but I did it to be safe) Back > Wipe > Format data again
[Optional] Go Back > Reboot > Recovery to boot back into TWRP (you NEED to do this before attempting to flash Magisk, not entirely sure why but it will bootloop otherwise) > Install > Flash compatible Magisk .zip for root access
Reboot > System
Just flashed Xiaomi.eu MIUI 12 beta 20.05.14 and it runs like a charm. They changed up the way permissions are granted so all my apps are prompting to reallow certain things but that's nbd. Also you can turn off the new iPhone-ripoff notification shade thank god
Tnx for reply, I will apply for bootloader unlock, and check out this steps. Some follow up questions, i see you put the link to "weekly" rom, does than mean it will be updated every week, and is there some sort of "stable" version that gets update monthly or something like that, and also does Xeu get OTA updates, is that possible, or its always done with PC? tnx
Nikola_zr said:
Tnx for reply, I will apply for bootloader unlock, and check out this steps. Some follow up questions, i see you put the link to "weekly" rom, does than mean it will be updated every week, and is there some sort of "stable" version that gets update monthly or something like that, and also does Xeu get OTA updates, is that possible, or its always done with PC? tnx
Click to expand...
Click to collapse
Actually yes we have stable version. However since MIUI 12 isn't officially go global for Mix 3 (yet) then these versions are being made based on alpha/beta once let's say
Nikola_zr said:
Tnx for reply, I will apply for bootloader unlock, and check out this steps. Some follow up questions, i see you put the link to "weekly" rom, does than mean it will be updated every week, and is there some sort of "stable" version that gets update monthly or something like that, and also does Xeu get OTA updates, is that possible, or its always done with PC? tnx
Click to expand...
Click to collapse
Yes it is a beta ROM that's updated weekly. There is a stable global version of MIUI 11 (Android 10), but a stable MIUI 12 hasn't been released for the Mix 3 yet. Should come eventually though. I update weekly through TWRP, it's not exactly as easy as an OTA update but it only takes a few minutes at most and you don't need a computer to update.
If you're going to go with the weekly beta, I suggest the 20.2.27 update (it's MIUI 11) because it felt the most stable. Didn't find any animation hitches or weird issues or anything. The latest MIUI 12 beta is good too but the animations are a little wonky at times.
On the latest changelog, it says the beta will end for Mi Mix 3 from September 5th. Does it mean EOL for Mi Mix 3 or only stable builds will be updated?
in version 11 I had a problem with the sensor during a phone call. it turned off the screen but didn't turn it on.
in version 12 there is this problem too. Do you have that too?
I am using the latest LOS built on a Xiaomi Redmi Note 8T and everything works except the signal. I am using an European simcard. Before I installed LOS, the simecard worked fine with the phone.
What I've tried:
- dial *#*#4636*#*#
- use an older built
- reinstall firmware
- turning on and off multiple times
Thank you for your help.
taubenschlag said:
I am using the latest LOS built on a Xiaomi Redmi Note 8T and everything works except the signal. I am using an European simcard. Before I installed LOS, the simecard worked fine with the phone.
What I've tried:
- dial *#*#4636*#*#
- use an older built
- reinstall firmware
- turning on and off multiple times
Thank you for your help.
Click to expand...
Click to collapse
camera works ?
yes, not fully, but it works. the wide camera doesnt work, but I dont mind that much
does it have to do anything with the phone signal?
taubenschlag said:
yes, not fully, but it works. the wide camera doesnt work, but I dont mind that much
does it have to do anything with the phone signal?
Click to expand...
Click to collapse
next time use reply or quote (i didn't get a notification)
yes, both of them (cam/celular signal) rely on "sensors" ,so that might be a sensor problem
i suggest you do a clean flash and see
Installing Magisk on Redmi Note 8T (Willow) with Lineage OS and recovery
I am trying to get Magisk to work on my Xiaomi Redmi Note 8T with Lineage OS, but the step where I am patching the boot.img is failing. I am using LOS recovery, and I followed the instructions provided by topjohnwu [1]: because the 8T doesn't...
forum.xda-developers.com
if it dosn't work try restore your persist
loopypalm said:
next time use reply or quote (i didn't get a notification)
yes, both of them (cam/celular signal) rely on "sensors" ,so that might be a sensor problem
i suggest you do a clean flash and see
Installing Magisk on Redmi Note 8T (Willow) with Lineage OS and recovery
I am trying to get Magisk to work on my Xiaomi Redmi Note 8T with Lineage OS, but the step where I am patching the boot.img is failing. I am using LOS recovery, and I followed the instructions provided by topjohnwu [1]: because the 8T doesn't...
forum.xda-developers.com
if it dosn't work try restore your persist
Click to expand...
Click to collapse
Oh sorry, I am new, so I didnt see the reply button . OK, I cleaned the flash, but its the same think. camera works (the normal one), but the signal does not....
What does "if it dosn't work try restore your persist" mean?
taubenschlag said:
Oh sorry, I am new, so I didnt see the reply button . OK, I cleaned the flash, but its the same think. camera works (the normal one), but the signal does not....
What does "if it dosn't work try restore your persist" mean?
Click to expand...
Click to collapse
[Guide] About repairing/fixing the persist partition
Disclaimer: I am not responsible for the results of any of these operations. Everyone knows that the persist partition is responsible for sonsors and carrier network etc. Once this partition is failed or lost, your phone will go wrong. I just...
forum.xda-developers.com
Hello!
I had more or less the same problem both on LineageOS and ArrowOS. I am currently using ArrowOS. Followed the instructions for ArrowOS. Full wipe, flash rom, latest firmware, reboot. I don't use gapps.
Every data/radio connection worked except LTE. I am in Hungary. After a bit of research, trial and error i have a perfectly working system. OTA works too.
All i had to do is:
- Dial *#*#4636#*#*
- Phone Information, upper right corner dots (menu?).
- Select Radio Band.
- Europe.
- Restart phone.
After that i had working LTE both data and radio. Maybe for data you have to research your carrier's instructions.
Hope i helped, good luck.
Abitia said:
Hello!
I had more or less the same problem both on LineageOS and ArrowOS. I am currently using ArrowOS. Followed the instructions for ArrowOS. Full wipe, flash rom, latest firmware, reboot. I don't use gapps.
Every data/radio connection worked except LTE. I am in Hungary. After a bit of research, trial and error i have a perfectly working system. OTA works too.
All i had to do is:
- Dial *#*#4636#*#*
- Phone Information, upper right corner dots (menu?).
- Select Radio Band.
- Europe.
- Restart phone.
After that i had working LTE both data and radio. Maybe for data you have to research your carrier's instructions.
Hope i helped, good luck.
Click to expand...
Click to collapse
Thank you very much for your answer. I tried it, but unfortunately nothing changed. What net type did you use? I have "LTE/TD-SCDMA/CDMA/EVDO/GSM/WCDMA". Is it the correct one?
loopypalm said:
[Guide] About repairing/fixing the persist partition
Disclaimer: I am not responsible for the results of any of these operations. Everyone knows that the persist partition is responsible for sonsors and carrier network etc. Once this partition is failed or lost, your phone will go wrong. I just...
forum.xda-developers.com
Click to expand...
Click to collapse
ok thanks, I will try that
loopypalm said:
[Guide] About repairing/fixing the persist partition
Disclaimer: I am not responsible for the results of any of these operations. Everyone knows that the persist partition is responsible for sonsors and carrier network etc. Once this partition is failed or lost, your phone will go wrong. I just...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi,
thank you so much! This actually worked. It was very complicated, but in the end I can now use my phone. Thank you!
taubenschlag said:
Hi,
thank you so much! This actually worked. It was very complicated, but in the end I can now use my phone. Thank you!
Click to expand...
Click to collapse
Hi, recently I got this a32 from a friend because my phone is broken, but there's a problem. Some time ago she updated this phone from android 11 to 12 and the touchscreen completely stopped working, i got the phone yesterday hoping to fix this problem but i updated to android 13 (oneui 5.1) and it still doesnt work, i tried do downgrade to android 11 but its impossible and for last i tried to install twrp and then a gsi (following a guide here on the forum), i noticed that in twrp the touchscreen does actually work but after installing lineage os 20 it didn't again, is there any hope for this phone?
persifele said:
Hi, recently I got this a32 from a friend because my phone is broken, but there's a problem. Some time ago she updated this phone from android 11 to 12 and the touchscreen completely stopped working, i got the phone yesterday hoping to fix this problem but i updated to android 13 (oneui 5.1) and it still doesnt work, i tried do downgrade to android 11 but its impossible and for last i tried to install twrp and then a gsi (following a guide here on the forum), i noticed that in twrp the touchscreen does actually work but after installing lineage os 20 it didn't again, is there any hope for this phone?
Click to expand...
Click to collapse
Did you contacted the assistance? Seems a bad driver or kernel problem.
zSyntex said:
Did you contacted the assistance? Seems a bad driver or kernel problem.
Click to expand...
Click to collapse
no because i dont know how much it would cost and the phone isnt mine either so if possible i dont want to spend money
persifele said:
no because i dont know how much it would cost and the phone isnt mine either so if possible i dont want to spend money
Click to expand...
Click to collapse
We couldn't provide support for the hardware, mostly because you said that you've tried to reset the device and flash the stock ROM again.
If this doesn't fix the hardware issue, the assistance is the only way.
Probably a failure batch etc.
to be completely honest i flashed the stock rom by a backup i did before flashing lineage os, so if there's a guide on how to flash one ui 5.1 in order to have a clean installation it would be rlly helpful
persifele said:
to be completely honest i flashed the stock rom by a backup i did before flashing lineage os, so if there's a guide on how to flash one ui 5.1 in order to have a clean installation it would be rlly helpful
Click to expand...
Click to collapse
Simply download the latest firmware from SamLoader (Bifrost) and use Odin in order to flash it.
Tell me if you couldn't flash
I tried installing the latest firmware with odin, everything went fine but nothing, touch still doesn't work, i think tomorrow i'll take it to someone to fix it.
persifele said:
Hi, recently I got this a32 from a friend because my phone is broken, but there's a problem. Some time ago she updated this phone from android 11 to 12 and the touchscreen completely stopped working, i got the phone yesterday hoping to fix this problem but i updated to android 13 (oneui 5.1) and it still doesnt work, i tried do downgrade to android 11 but its impossible and for last i tried to install twrp and then a gsi (following a guide here on the forum), i noticed that in twrp the touchscreen does actually work but after installing lineage os 20 it didn't again, is there any hope for this phone?
Click to expand...
Click to collapse
what model of a32 is it? SM-A325F or??
One ui 5.1 firmware cannot be downgraded. I currently daily drive crdroid from nazim on one ui 5.1 firmware. my touch has never had issues. May be a hardware issue. Maybe a custom kernel would solve it. I built one for A325F that works on one ui 5.1 firmware. Give it a try from here. Its permissive btw. Just flash it in twrp. Although take a backup of boot before flashing incase something goes wrong
Captain_cookie_200 said:
what model of a32 is it? SM-A325F or??
One ui 5.1 firmware cannot be downgraded. I currently daily drive crdroid from nazim on one ui 5.1 firmware. my touch has never had issues. May be a hardware issue. Maybe a custom kernel would solve it. I built one for A325F that works on one ui 5.1 firmware. Give it a try from here. Its permissive btw. Just flash it in twrp. Although take a backup of boot before flashing incase something goes wrong
Click to expand...
Click to collapse
Hi, I tried to flash from twrp but it just gives me a series of "unable to unlock /dev/block/mmcblk0p14" and so on, btw yes its a A325F.
persifele said:
Hi, I tried to flash from twrp but it just gives me a series of "unable to unlock /dev/block/mmcblk0p14" and so on, btw yes its a A325F.
Click to expand...
Click to collapse
its fine. those are normal. if the flash suceeds at last that is all that matters
Captain_cookie_200 said:
its fine. those are normal. if the flash suceeds at last that is all that matters
Click to expand...
Click to collapse
The problem is that after flashing it goes in a bootloop where it says that "this phone's bootloader is unlocked, press power button" i do it and it starts the galaxy logo with above the writing "the software you are using isnt official, you may have problems with security and features" and it gets stuck there, rn i flashed the original firmware with odin and the phone is working but touch still isn't.
EDIT: i forgot to add that when i flashed with odin everything was going fine until the phone's screen went from green to red, i've never seen this so idk if i should be worried or not (phone is still running normally).
persifele said:
The problem is that after flashing it goes in a bootloop where it says that "this phone's bootloader is unlocked, press power button" i do it and it starts the galaxy logo with above the writing "the software you are using isnt official, you may have problems with security and features" and it gets stuck there, rn i flashed the original firmware with odin and the phone is working but touch still isn't.
EDIT: i forgot to add that when i flashed with odin everything was going fine until the phone's screen went from green to red, i've never seen this so idk if i should be worried or not (phone is still running normally).
Click to expand...
Click to collapse
oh weird . you are using one ui 5.1 right? whats the firmware name or version. Also those things def look like hardware issue. you should get it checked.
Captain_cookie_200 said:
oh weird . you are using one ui 5.1 right? whats the firmware name or version. Also those things def look like hardware issue. you should get it checked.
Click to expand...
Click to collapse
yes i'm on android 13 one ui 5.1, the firmware is A325FXXU3DWB8_A325FOXM3DWB8_ITV. I got it checked and they said that it cant be fixed because i cant downgrade from android 13 to another one, i could try installing crdroid like you and if you could send me a guide it would be amazing, thanks again.
persifele said:
yes i'm on android 13 one ui 5.1, the firmware is A325FXXU3DWB8_A325FOXM3DWB8_ITV. I got it checked and they said that it cant be fixed because i cant downgrade from android 13 to another one, i could try installing crdroid like you and if you could send me a guide it would be amazing, thanks again.
Click to expand...
Click to collapse
Just flash twrp for this thing from here. Follow steps on that thread to decrypt your storage and stuff. Then download crdroid gsi. Extract it. flash img file to system partition in twrp. Afterwards wipe dalvik, cache, internal storage
(internal storage is not necessary). You should be able to boot into twrp sucessfully.
I also have some workarounds and the stuff i use for my daily driving in this thread here.
If you need any further help i'll be here to assist.
Captain_cookie_200 said:
Just flash twrp for this thing from here. Follow steps on that thread to decrypt your storage and stuff. Then download crdroid gsi. Extract it. flash img file to system partition in twrp. Afterwards wipe dalvik, cache, internal storage
(internal storage is not necessary). You should be able to boot into twrp sucessfully.
I also have some workarounds and the stuff i use for my daily driving in this thread here.
If you need any further help i'll be here to assist.
Click to expand...
Click to collapse
Oh um i am sorry looks like thread doesnt contain instructions to that. I'll write em here myself
When you boot into twrp after flashing go to advanced and go to terminal
type
multidisabler
run it two times. Then go to format. Then press format data and type yes. Once its done reboot back into twrp again. Then flash crdroid as i said in my post above. and format the things i said. you should be able to boot into crdroid normally.
Captain_cookie_200 said:
Oh um i am sorry looks like thread doesnt contain instructions to that. I'll write em here myself
When you boot into twrp after flashing go to advanced and go to terminal
type
multidisabler
run it two times. Then go to format. Then press format data and type yes. Once its done reboot back into twrp again. Then flash crdroid as i said in my post above. and format the things i said. you should be able to boot into crdroid normally.
Click to expand...
Click to collapse
I followed everything you said, flashed crdroid but nothing, touch still doesnt work if not for when im twrp, i tried to flash kernel again and it still didn't so i don't know what to do anymore.
persifele said:
I followed everything you said, flashed crdroid but nothing, touch still doesnt work if not for when im twrp, i tried to flash kernel again and it still didn't so i don't know what to do anymore.
Click to expand...
Click to collapse
So uh looks like you have no options left. I just want to make sure. could you list the exact methods you used to flash the fw. Along with where u got the fw from? Lets see if the fw itself is broken or something.
Also this is very unrelated and time wasting. but you could try download one ui 5 firmware. Then extract super.img from ap. unsparse it and extract vendor.img and flash it to vendor partition using twrp. Then decrypt by typing
multidisabler twice in terminal as said in my previous post. Check if maybe an older version one ui 5 firmware has this issue fixed. one ui 5's kernel boots so one ui 5 vendor should work on 5.1 as well. It may not work but worth a try. you could also try doing this with android 12 firmware if that fixes it. if you do not have a linux machine availible i'll do it for you and upload the files for both firmwares here. Otherwise if its a hardware issue get your phone replaced or try getting the screen replaced. if still nothing happens ig switching to a new phone would be the only optiion.
So, to flash the firmware I used odin, the fw was from sammobile.
For trying to extract super.img and so on idk how to actually do it so if you could explain it would be really helpful. Btw trying to flash android 12 firmware is impossible because samsung made it so,
thank you again for the help.
persifele said:
So, to flash the firmware I used odin, the fw was from sammobile.
For trying to extract super.img and so on idk how to actually do it so if you could explain it would be really helpful. Btw trying to flash android 12 firmware is impossible because samsung made it so,
thank you again for the help.
Click to expand...
Click to collapse
i use samfw mostly for my firmwares. anyways. You need a linux machine nearby. ubuntu or arch. any distro based on them would work.
first you need to unsparse the super.img
for that we use
simg2img super.img super-raw.img
then we can use lpunpack or mount it to get our vendor.
we flash it using twrp and then we run multidisabler twice like we did when we first flashed gsi.
As you said above if you could do it for me it'd be awesome because i don't have a pc with linux rn.