Develop Bugs

Lineage OS on A2 lite?

Is it possibleto flash the Lineage treble rom to mi A2 lite?

I still didn't tried this (I must search for a spare phone to use while experimenting with daisy) but you can precede me, simply reset your phone and flash via fastboot with
Code:
fastboot flash system lineagetreblerom.img
You must use the A/B image type.
If something goes wrong you can flash the stock firmware.

BubuXP said:
I still didn't tried this (I must search for a spare phone to use while experimenting with daisy) but you can precede me, simply reset your phone and flash via fastboot with
Code:
fastboot flash system lineagetreblerom.img
You must use the A/B image type.
If something goes wrong you can flash the stock firmware.
Click to expand...
Click to collapse
As far as i understood treble, it is only the vendor partition which is not flashed. So you would still need a LOS compatible kernel to flash (or you are lucky and the original kernel works). Also, LOS needs to be adjusted for specific things on this phone (like resolution, dpi, options to show up in settings, avaiable ram/storage, etc).
So we have to wait until xiaomi or a proper dev releases a kernel source. It would probably also be possible to adjust the build environment to fit the original kernel.
Or did i understand sth wrong here?
edit:
Flashing GSI's should work, it is a nice way to have another rom with more features on the device, but it is not a homebuilt n optimized rom (probably similar perf/battery to stock).

treble gsi rom don't need the vendor partition that's what makes treble great . you just flash the gsi rom into system on a treble compatible device

Hi
sgi ab images works (does not handle well rounded corners as icons are a bit near corners) but works

lineage booted. I will test and report
Both Lineage and RR boots but they are laggy. Camera quality is quite bad.
Both can be used as daily drivers
*can not handle well rounded corners as max-232 said

BubuXP said:
I still didn't tried this (I must search for a spare phone to use while experimenting with daisy) but you can precede me, simply reset your phone and flash via fastboot with
Code:
fastboot flash system lineagetreblerom.img
You must use the A/B image type.
If something goes wrong you can flash the stock firmware.
Click to expand...
Click to collapse
fastboot erase system
fastboot -u flash system name_of_system.img

The Xiaomi MI A2 Lite stock comes compatible with treble, has it been tested with an image of Androoid 9?

menphis said:
The Xiaomi MI A2 Lite stock comes compatible with treble, has it been tested with an image of Androoid 9?
Click to expand...
Click to collapse
yes, I did before.
it booted, but the sgi I used needs a lot of work, many things didn't work.
but, yes, I confirm, it booted

max-232 said:
yes, I did before.
it booted, but the sgi I used needs a lot of work, many things didn't work.
but, yes, I confirm, it booted
Click to expand...
Click to collapse
What SGI you use?

forum.xda-developers.com/project-treble/trebleenabled-device-development/aosp-9-0-phh-treble-t3831915
This above

max-232 said:
yes, I did before.
it booted, but the sgi I used needs a lot of work, many things didn't work.
but, yes, I confirm, it booted
Click to expand...
Click to collapse
max-232 said:
forum.xda-developers.com/project-treble/trebleenabled-device-development/aosp-9-0-phh-treble-t3831915
This above
Click to expand...
Click to collapse
I recently received my A2 Lite, because you do not test the next one that is more stable, as everything works: https://androidfilehost.com/?fid=5862345805528067642
All the files:
https://androidfilehost.com/?w=files&flid=280192

How can flash these post zips with out twrp?

I really hope we get more going ons here it's dead and i cant stand android one if nothing happens soon im going to sell this phone.

mortmaru said:
I really hope we get more going ons here it's dead and i cant stand android one if nothing happens soon im going to sell this phone.
Click to expand...
Click to collapse
I don't think what happening right now is dead, it is still very active and you can flash Lineage or RR if you want
For a few weeks old phone, i consider this as reasonable

mortmaru said:
I really hope we get more going ons here it's dead and i cant stand android one if nothing happens soon im going to sell this phone.
Click to expand...
Click to collapse
This device is new, barely has a month that went on the market, also comes with factory Oreo, also Android 9 came out a few days ago official ...
What development do you need urgently?

menphis said:
This device is new, barely has a month that went on the market, also comes with factory Oreo, also Android 9 came out a few days ago official ...
What development do you need urgently?
Click to expand...
Click to collapse
Some custom roms the base version is awful it is missing so much you cant even backup all stuff from miui to this even app data doesn't transfer over using googles so called backup
With it being month old i expected modded versions even if it was based on the current andriod one loaded with new look bunch of extra options

Can anyone confirm if on AOSP/LOS systems notification LED od still single color (white only)?

Doman said:
Can anyone confirm if on AOSP/LOS systems notification LED od still single color (white only)?
Click to expand...
Click to collapse
It's impossible to have other colors on mi a2, as the phisical LED is only white, not rgb

Another month passes and still nothing.
Hopefully some one will come up with something soon even the official updates for this phone are really slow

How I can flash a GSI ROM for Redmi Note 8 Pro?

Hello everyone, Im trying to understand how to flash a GSI img ROM (I want to try AOSP stock, or Havoc OS) but, I saw some posts and looks like is a bit hard to do.
I had TWRP installed (unofficial begonia) and magisk installed.
some informations I found: this device is just A slot supported
What exactly I need?
Orange Fox recovery?
Before flash need to disable something in recovery?
A arm64 slot IMG?
And gapps?
What are the steps?
Im waiting your answer

So far with my personal experience trying to flash Lineage 17 GSI on my RN8Pro and have had no luck. Lost baseband and both imei #'s in the process too (still trying to figure out how to restore).

Finally was lucky!
Flash LR Team TWRP:
https://mega.nz/#!B75xWQQQ!8DQdy09luHihxCziRX7ywUWkAwmAahjnWOQDgHxcTPA
Enable debugging and make sure computer has permission to use
On command promp adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot (immediately disconnect phone and hold volume up)
In twrp go to advanced and Select "Close AVB2.0" swipe to confirm
Go back to twrp home -> Wipe -> Format
Flash gsi
And presto!
I just flashed Lineage 17 GSI as of now I wouldn't recommend it. Fixing to flash ASOP 10 GSI from phhusson see if it is any better!
Also as a favor since I lost baseband and imei for my phone could you please create a backup through twrp of your nvram and nvdata and PM it to me?
If you need any help just pm me!

JuanM2020 said:
Finally was lucky!
Flash LR Team TWRP:
https://mega.nz/#!B75xWQQQ!8DQdy09luHihxCziRX7ywUWkAwmAahjnWOQDgHxcTPA
Enable debugging and make sure computer has permission to use
On command promp adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot (immediately disconnect phone and hold volume up)
In twrp go to advanced and Select "Close AVB2.0" swipe to confirm
Go back to twrp home -> Wipe -> Format
Flash gsi
And presto!
I just flashed Lineage 17 GSI as of now I wouldn't recommend it. Fixing to flash ASOP 10 GSI from phhusson see if it is any better!
Also as a favor since I lost baseband and imei for my phone could you please create a backup through twrp of your nvram and nvdata and PM it to me?
If you need any help just pm me!
Click to expand...
Click to collapse
What problems were there with the los 17 gsi?

Please share what's working on the GSI ROM and what's not. Thank you.

polfrank said:
What problems were there with the los 17 gsi?
Click to expand...
Click to collapse
Off the bat, Bluetooth did not work it just kept giving a Bluetooth has stopped message. Didn't have face unlock. Screen would suddenly flash as if display were damaged and would suddenly freeze when opening stock apps. And a few other things I don't remember as I already flash off of it.

Helhound0 said:
Please share what's working on the GSI ROM and what's not. Thank you.
Click to expand...
Click to collapse
I've flashed Havoc OS 2.9 GSI and after resizing and disabling HW overlays the ROM works near perfectly albeit some camera issues.

JuanM2020 said:
Finally was lucky!
Flash LR Team TWRP:
https://mega.nz/#!B75xWQQQ!8DQdy09luHihxCziRX7ywUWkAwmAahjnWOQDgHxcTPA
Enable debugging and make sure computer has permission to use
On command promp adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot (immediately disconnect phone and hold volume up)
In twrp go to advanced and Select "Close AVB2.0" swipe to confirm
Go back to twrp home -> Wipe -> Format
Flash gsi
And presto!
I just flashed Lineage 17 GSI as of now I wouldn't recommend it. Fixing to flash ASOP 10 GSI from phhusson see if it is any better!
Also as a favor since I lost baseband and imei for my phone could you please create a backup through twrp of your nvram and nvdata and PM it to me?
If you need any help just pm me!
Click to expand...
Click to collapse
Of course and thanks dude. In a few hours i will attach the files.

yayimathrowaway said:
I've flashed Havoc OS 2.9 GSI and after resizing and disabling HW overlays the ROM works near perfectly albeit some camera issues.
Click to expand...
Click to collapse
Newbie here. Please let me know what is it for and how to "resizing and disabling HW overlays"

yayimathrowaway said:
I've flashed Havoc OS 2.9 GSI and after resizing and disabling HW overlays the ROM works near perfectly albeit some camera issues.
Click to expand...
Click to collapse
That sounds good. Thanks for sharing. Did you use GSI since you flashed or did you restore MIUI?

Sorry for my ignorance, but what is a GSI ROM?

montechristos1 said:
Sorry for my ignorance, but what is a GSI ROM?
Click to expand...
Click to collapse
Generic System Image. Basically a single ROM image that should technically work in any device running Android 8.1 or newer. It contains the generic AOSP (Pure android) source.

Helhound0 said:
Generic System Image. Basically a single ROM image that should technically work in any device running Android 8.1 or newer. It contains the generic AOSP (Pure android) source.
Click to expand...
Click to collapse
Thanks.
So people were able to flash LOS GSI on their Redmi Note PRO?
No specific thread for this?
(I am one of the people that are waiting for one of the custom open-source ROMs to replace the (ihmo) horrible MUI)

MarkLev said:
Newbie here. Please let me know what is it for and how to "resizing and disabling HW overlays"
Click to expand...
Click to collapse
Disabling HW Overlays means that your GPU is the only thing that will handle all of the graphics on your phone. If this is not on in some GSI ROMs the screen will flicker when it's about to go to sleep and at other random times. It can be accessed in Developer options.
Additionally, as this is a GSI made to work on many different phones, the proportions on the screen are off when you first install it. On Havoc, all of the resizing options are in Havoc Settings. In other ROMs without customization options, there are ADB commands that can resize your ROM. Specifically, the problems I initially experienced were involving the status bar icons and clock only partially being on the screen.
---------- Post added at 07:57 AM ---------- Previous post was at 07:46 AM ----------
Helhound0 said:
That sounds good. Thanks for sharing. Did you use GSI since you flashed or did you restore MIUI?
Click to expand...
Click to collapse
I am actually using the GSI right now. I didn't restore MIUI because I just did not like it. I think I'll stay on this GSI. Again, after some modifications in Settings, the ROM I'm using works near perfectly.
The cameras, of course, are kind of messed up though. No matter what camera app I use I cannot access the 64MP camera and anything other than the camera app that came with the GSI (which is pretty bad) randomly flickers the screen while I'm taking a picture or recording a video, even after disabling HW Overlays in Developer Options. Maybe could be fixed by flashing a third party camera app as a system app.
Other than that, no problems whatsoever.
---------- Post added at 08:04 AM ---------- Previous post was at 07:57 AM ----------
KonahZave said:
Hello everyone, Im trying to understand how to flash a GSI img ROM (I want to try AOSP stock, or Havoc OS) but, I saw some posts and looks like is a bit hard to do.
I had TWRP installed (unofficial begonia) and magisk installed.
some informations I found: this device is just A slot supported
What exactly I need?
Orange Fox recovery?
Before flash need to disable something in recovery?
A arm64 slot IMG?
And gapps?
What are the steps?
Im waiting your answer
Click to expand...
Click to collapse
If you still need some help, I have a full guide on how to flash here

yayimathrowaway said:
I am actually using the GSI right now. I didn't restore MIUI because I just did not like it. I think I'll stay on this GSI. Again, after some modifications in Settings, the ROM I'm using works near perfectly.
The cameras, of course, are kind of messed up though. No matter what camera app I use I cannot access the 64MP camera and anything other than the camera app that came with the GSI (which is pretty bad) randomly flickers the screen while I'm taking a picture or recording a video, even after disabling HW Overlays in Developer Options. Maybe could be fixed by flashing a third party camera app as a system app.
Other than that, no problems whatsoever.
Click to expand...
Click to collapse
I don't really mind the cameras not working at a 100% tbh since i don't use them that much. However did you try GCam on GSI or any other API2 camera app?

Helhound0 said:
I don't really mind the cameras not working at a 100% tbh since i don't use them that much. However did you try GCam on GSI or any other API2 camera app?
Click to expand...
Click to collapse
Yeah, but the screen flashes randomly on them.
CameraMX works great with the cameras that it does support. CameraF5-V crashes randomly. GCam for RN8P can only take photos, and only supports 2 cameras. I think that some of these issues would be fixed if I flashed then as system apps, because the stock camera app works fine, albeit the fact that it's just not a very good camera app.

[ROM][UNOFFICIAL][W.I.P]LineageOS for Redmi Note 9S/9Pro[curtana/joyeuse]

tldr; use the LeddaZ build
Downloads:
ROM
Lineage Recovery
Hello XDA,
I'm posting a build using the unified curtana build code that's on github. I have a joyeuse (9 Pro) so I can't really test it on the 9S (curtana). I've been testing it out for a couple of days and haven't had any bugs other than status bar centered items.
Bugs / not working / To do:
Wireguard support Added 18-Sept
Play Store certification (Workaround using MagiskHide Props Config)
64 MP camera module seems to work only with the ANX Camera ver 185(not included). You must manually add all permissions.
Status bar text around the front camera
Code:
Source Code: https://github.com/LineageOS
Device: https://github.com/xiaomi-sm6250-devs/android_device_xiaomi_curtana-unified
Kernel: https://github.com/xiaomi-sm6250-devs/android_kernel_xiaomi_sm6250
Vendor: https://gitlab.com/m0sin/proprietary_vendor_xiaomi_curtana

Play Store certification: Have you tried with the latest gapps yet?

How to install? Anything I need to look at?

dungphp said:
Play Store certification: Have you tried with the latest gapps yet?
Click to expand...
Click to collapse
I have, it might be Magisk or I'm not hiding it properly.
Edit: I used the Magisk HideProps module and everything works fine now. I think the naming, curtana vs joyeuse and version number were causing the issue.

glurak888 said:
How to install? Anything I need to look at?
Click to expand...
Click to collapse
If you are coming from stock, I installed the Lineage recovery, installed the ROM. After it rebooted, I went back to install OpenGapps and Magisk.
I tried going from stock using Pbrp but it failed for me. After Lineage was installed, PBRP worked fine.

I have just installed it, anything I should know?

Installed successful on
Note pro 9 a Joyeuse (global) with 64mp cam , nfc and Lte aka a M2003J6B2G
Only recovery from lineage worked for me ... it also enables fastbootd !!
Rooting with magiskmanager wasnt possible via patching boot.img but flashing Magisk-v20.4.zip via recovery worked .
nfc works too
fastcharge seems so work fine ...
lte seems to work too
will try anx cam and 64 mpx tomorrow ... //edit - ANXCameraUnity_185.SaltyIntelligentPlainsqueaker and 48MPFixQ_170.SophisticatedFatBetafish make it work too ....
thx

I installed the ANXCameraUnity_185.SaltyIntelligentPlainsqueaker.zip and the camera app crash all time. Should I install and the 48MPFixQ_170.SophisticatedFatBetafish.zip?
Thank you for this nice rom, keep walking.

[email protected] said:
I installed the ANXCameraUnity_185.SaltyIntelligentPlainsqueaker.zip and the camera app crash all time. Should I install and the 48MPFixQ_170.SophisticatedFatBetafish.zip?
Thank you for this nice rom, keep walking.
Click to expand...
Click to collapse
Yes, install the 48 MP Fix to add the 48 MP camera. It's crashing because you need to manually fix the permissions on the app. After you allow everything it'll crash once then work fine.

Minor update:
September security patch
Added wireguard kernel support 1.0.20200908

moffa~ said:
If you are coming from stock, I installed the Lineage recovery, installed the ROM. After it rebooted, I went back to install OpenGapps and Magisk.
I tried going from stock using Pbrp but it failed for me. After Lineage was installed, PBRP worked fine.
Click to expand...
Click to collapse
so basically we flash on joyeuse a curtana recovery in order to flash a curtana rom and then we flash back the joyeuse recovery right?

didicola said:
so basically we flash on joyeuse a curtana recovery in order to flash a curtana rom and then we flash back the joyeuse recovery right?
Click to expand...
Click to collapse
Not sure I understand what you are saying. The build is joyeuse/curtana unified. I don't like not being able to flash zips without sideloading so I'm using the PBRP recovery. For the initial flash I used my PC and the Lineage Recovery.

Are the gapps included or do we need to flash them?

kalehrl said:
Are the gapps included or do we need to flash them?
Click to expand...
Click to collapse
Not included. Must be flashed.

Excellent rom, I have used it since its publication, and so far no problem. The performance of the battery seems to me outstanding, and to this day, it is the only one in which an indispensable application for me (Sony Music) works without problem. I hope the excellent work continues, and it even became an official version. Thanks!

I use redmi note 9s, can i flash this rom?

vanmaitrangchu said:
I use redmi note 9s, can i flash this rom?
Click to expand...
Click to collapse
Theoretically yes. Please share your experience if you try it out.

moffa~ said:
Theoretically yes. Please share your experience if you try it out.
Click to expand...
Click to collapse
When i used mi note 3, lineage is bettest rom for me. But it is officical. with mi note 9s (4/64) i got few bug, i try test it again.
first day i got:
when flash, i have some problem, but it easy, forget it. after that i reboot system, 2 minute its done. reboot to recovery to flash gapp (nano), reboot, but i can sync adress from google .
Try again, i wipe all data (rom in sd card), flash again. reboot device, wait rom instal, reboot recovery, flash gapp again, reboot, it ok :v i dont know why!
some thing i dont like with rom:
- dial not support dual sim, mean: icon sim1 sim2 when use dial pad. i use 2 sim.
- swicht speaker too much make phone restart (im shiper, i usally switch), it make me crazy.
- no 1 hand mod, i ussally use it with 1 hand, to big to use.
And else i like this rom, from mi note 3.
Sorry, my english very bad! I hope offical soon, thanks so much!

vanmaitrangchu said:
When i used mi note 3, lineage is bettest rom for me. But it is officical. with mi note 9s (4/64) i got few bug, i try test it again.
first day i got:
when flash, i have some problem, but it easy, forget it. after that i reboot system, 2 minute its done. reboot to recovery to flash gapp (nano), reboot, but i can sync adress from google .
Try again, i wipe all data (rom in sd card), flash again. reboot device, wait rom instal, reboot recovery, flash gapp again, reboot, it ok :v i dont know why!
some thing i dont like with rom:
- dial not support dual sim, mean: icon sim1 sim2 when use dial pad. i use 2 sim.
- swicht speaker too much make phone restart (im shiper, i usally switch), it make me crazy.
- no 1 hand mod, i ussally use it with 1 hand, to big to use.
And else i like this rom, from mi note 3.
Sorry, my english very bad! I hope offical soon, thanks so much!
Click to expand...
Click to collapse
Thanks for testing it out.
Unfortunately, I don't have a second sim card to test it with.
I have no problem using the speaker phone at all. Could you grab the logs, maybe I can look into it.
It looks like one-hand mode was removed from Lineage. There are gestures for navigation. It works about 90% of the time for me.
------Edit-------
I tested my phone out with a second sim card today and had no issues. Is anyone else having issues with a second sim card?

moffa~ said:
Thanks for testing it out.
Unfortunately, I don't have a second sim card to test it with.
I have no problem using the speaker phone at all. Could you grab the logs, maybe I can look into it.
It looks like one-hand mode was removed from Lineage. There are gestures for navigation. It works about 90% of the time for me.
------Edit-------
I tested my phone out with a second sim card today and had no issues. Is anyone else having issues with a second sim card?
Click to expand...
Click to collapse
The problem occurs when turning on the speakerphone while calling. End of the call without turning off the speakerphone, the next call will easily lose sound. Ratio 1/5. Trying to turn on and off the speakerphone is very easy to reset the device.
Regarding the 2 sim issue: I mean there is no separate button for the 2 sims in the dial pad. Like the dial pad of the EU version, very convenient.
I need one hand mod, too hight with my hand. like picture.

Has anyone tried GSI on the G8 Play?

Just as I asked. I would like to know if anyone has made GSI work or at least tried (like me) to make it work.

RandoMike said:
Just as I asked. I would like to know if anyone has made GSI work or at least tried (like me) to make it work.
Click to expand...
Click to collapse
Update: It IS possible to install Lineage OS GSI on the G8 Play. However, you will trigger a security error (nothing critical, since your phone will still boot up). To install it, you really need to flash the One Macro Firmware (evidently, your device can hard brick, but it's possible to fix it ). Later, you can flash the Lineage rom through fastboot.
Even though it's possible to install it and even boot it, the rom is buggy. It would be wonderful if anyone who knows better developing than me would work on this device, which has been abandoned for so long...
Some bugs of this rom are:
Fingerprint sensor sometimes triggers volume up or down.
The screen is not well adjusted, picture seems weird.
Dm-verity error which will not allow the phone to boot unless you press the power button again.
Bluetooth audio not working.
I have not tested the rom completely yet. However, I would like to get this forum revived again, with the possibility of "messing up" with the phone. It's not impossible, it just needs some attention

You can flash a blank vbmeta image to disable security error this may help with some issues. good luck and thanks for your contribution to the device forum. (also, sorry for bad english)

Ale001 said:
You can flash a blank vbmeta image to disable security error this may help with some issues. good luck and thanks for your contribution to the device forum. (also, sorry for bad english)
Click to expand...
Click to collapse
I already tried that on the official ROM and it didn't work. I only get a DM-Verity error amd a bootloop when trying to boot Lineage, which can be solved if flashing the stock ROM again.

It's possible install a arm-ab gsi or I need to install one macro arm64 firmware first?

Ale001 said:
It's possible install a arm-ab gsi or I need to install one macro arm64 firmware first?
Click to expand...
Click to collapse
It didn't work for me on stock firmware. Lineage GSI worked for me on One Macro's ROM

Question Android auto

Anybody having issues with android auto? When connected I get black screen. If there's a fix please provide thx in advance

OP9P has known issues with android auto. For some people, setting USB mode to file transfer or PTP helps. Disabling USB debugging can help. Lineage OS and some other non-OOS based ROMs don't have the issue. This is one of the major reasons Im on lineage

For me, AA was working with OOS, but every time I connected the phone to my car via USB, I had to change the connection mode (only charging/file transfer/ptp…) once plugged in to "stabilize" the connection, or else it it would keep connecting/disconnecting.
Now I'm on LineageOS 18.1, and AA was not working but it was a Gapps package flashing problem with Nikgapps (the full package, or flashing the AA addon was needed, but I encounter a flashing problem because of a full memory that can be solved by configuration) .
Once fixed, AA is working but I still have the work-around to do to stabilize the connection.

clavelm80 said:
For me, AA was working with OOS, but every time I connected the phone to my car via USB, I had to change the connection mode (only charging/file transfer/ptp…) once plugged in to "stabilize" the connection, or else it it would keep connecting/disconnecting.
Now I'm on LineageOS 18.1, and AA was not working but it was a Gapps package flashing problem with Nikgapps (the full package, or flashing the AA addon was needed, but I encounter a flashing problem because of a full memory that can be solved by configuration) .
Once fixed, AA is working but I still have the work-around to do to stabilize the connection.
Click to expand...
Click to collapse
What configuration change did you make to fit the full nikgapps? I tried changing install partition to /system but it still said it was full and fails

dkcats3 said:
What configuration change did you make to fit the full nikgapps? I tried changing install partition to /system but it still said it was full and fails
Click to expand...
Click to collapse
Just that, setting InstallPartition=/system in nikgapps.config and flashing the full nikgapps from twrp.

clavelm80 said:
Just that, setting InstallPartition=/system in nikgapps.config and flashing the full nikgapps from twrp.
Click to expand...
Click to collapse
hmm I wonder if twrp vs lineage recovery makes a difference. And you placed the config file by just using `adb push nikgapps.config /sdcard/NikGapps/nikgapps.config` ?

clavelm80 said:
Just that, setting InstallPartition=/system in nikgapps.config and flashing the full nikgapps from twrp.
Click to expand...
Click to collapse
Also which TWRP are you using? I know there is one in the forums but I remember seeing mention of a different build people were recommending

For me on wireless Android Auto, it's been fine for the most part on latest OOS. Just thought I'd mention.

dkcats3 said:
hmm I wonder if twrp vs lineage recovery makes a difference. And you placed the config file by just using `adb push nikgapps.config /sdcard/NikGapps/nikgapps.config` ?
Click to expand...
Click to collapse
Awesome thank you will config a shor

dkcats3 said:
hmm I wonder if twrp vs lineage recovery makes a difference. And you placed the config file by just using `adb push nikgapps.config /sdcard/NikGapps/nikgapps.config` ?
Click to expand...
Click to collapse
There was already the config file on my system from installing the basic Nikgapps. I was not authorized to modify it from my file manager in Android (I may have forgotten to try and do it with the root access activated), so I changed it from the file manager of TWRP.
I try to solve my AA problem by different ways before succeeding with the config modification.
I first try to flash the full Nikgapps then only the AA addon with adb sideload on the LineageOS recovery. The install was failing with the full message. The system was still booting, but some Google app where closing unexpectedly.
I then installed TWRP, and try to do the same thing, still failing. I tried to flash mindthegapp but it failed also. Then @iNikhilMenghani (the Nik from Nikgapps) told me on telegram to set the InstallPartition settings, and flashing the full Nikgapps worked.
dkcats3 said:
Also which TWRP are you using? I know there is one in the forums but I remember seeing mention of a different build people were recommending
Click to expand...
Click to collapse
TWRP-3.5.1-lemonadep-Nebrassy-2.img from the thread on this forum.

To get mine to work on stock, I needed to switchy MTP to MIDI

I have no issues with android auto. Im on stock 11.2.7.7AA

All ok on 11.2.7.7 BA.

How do you get wireless Android Auto to work? I try it and it asks me to pair my Bluetooth and nothing happens

biggiesmalls657 said:
How do you get wireless Android Auto to work? I try it and it asks me to pair my Bluetooth and nothing happens
Click to expand...
Click to collapse
Just to be sure, you need a recent car with Wi-Fi that is compatible with AA Wireless. If it's your case, I'll let others help because my car is not compatible with wireless.

clavelm80 said:
Just to be sure, you need a recent car with Wi-Fi that is compatible with AA Wireless. If it's your case, I'll let others help because my car is not compatible with wireless.
Click to expand...
Click to collapse
I have a 2021 Subaru Forester limited so it better be lol

also android auto is the #1 leading cause of suicide.

biggiesmalls657 said:
I have a 2021 Subaru Forester limited so it better be lol
Click to expand...
Click to collapse
Subaru doesn't have wireless AA/Carplay.

entropism said:
Subaru doesn't have wireless AA/Carplay.
Click to expand...
Click to collapse
My Subaru has Apple Carplay, my friend uses it frequently

Yes, I know that, Subary has had Carplay and AA since the 2017 models. It doesn't have WIRELESS apple carplay. (or Android Auto).