Related
Hello all, thought I come here and post this since the developer of the reinstaller app doesn't have any support email attached to the app.
The app had a v1.5 update yesterday and haven't been able to download any app from the marketplace since this V1.5 update. The app just quits upon tapping the download icon....it doesn't invoke the marketplace installer and it just dies taking you to the start screen.
Is this update bad? Too bad I have updated already but if you haven't don't till this problem is solved somehow if only the developer gets to know and if only I'm not the only one expieriencing it.
If anyone has a solution please help, don't know if i'm the only one with this problem.
Thanks and a happy sunday
Kenzibit said:
Hello all, thought I come here and post this since the developer of the reinstaller app doesn't have any support email attached to the app.
The app had a v1.5 update yesterday and haven't been able to download any app from the marketplace since this V1.5 update. The app just quits upon tapping the download icon....it doesn't invoke the marketplace installer and it just dies taking you to the start screen.
Is this update bad? Too bad I have updated already but if you haven't don't till this problem is solved somehow if only the developer gets to know and if only I'm not the only one expieriencing it.
If anyone has a solution please help, don't know if i'm the only one with this problem.
Thanks and a happy sunday
Click to expand...
Click to collapse
Hello!
I just tried and, after clicking connect button and then next, it says that it cannot access to my www.windowsphone.com account page...
lordmago said:
Hello!
I just tried and, after clicking connect button and then next, it says that it cannot access to my www.windowsphone.com account page...
Click to expand...
Click to collapse
i have the same issue like you, why is it so? maybe it is writen for US market? or some other where we are not right now???
Dinchy87 said:
i have the same issue like you, why is it so? maybe it is writen for US market? or some other where we are not right now???
Click to expand...
Click to collapse
I don't think it could be a matter of market, because before this update, I could use it without any problem...
I have the exact same issue and already contacted the dev. He says he didn't Change anything on the logic and means it could be the Website having issues. I doubt that though since I can Access it perfectly fine via IE mobile or from my notebook.
Here's the support email address as it can be found in the about page of the app : [email protected]
+1...same issue, login process is just fine but it can't connect to app scan process...!?!?
I don't like the developer answer...should dig his app a little more...hope he will fix that soon I was waiting for those new features!
The app update has brought us problems....too bad
I am in the US and having the EXACT same problem. Dev definitely needs to fix this!
Able to log in and do the app count and everything. Like the new layout. But when I pick an app and try to download it, it doesn't do anything. Just blacks out and goes back to the phone app list.
Hopefully a fix is out soon. Good thing I'm not planning on flashing any ROMs now.
Yep same problem over here!
I just downloaded it, because everybody told me that this app is great, if you are too old to remind all your purchased apps Even if in my case they are only a few..
I'm from Germany.
I'm able to log in, and it counts all the apps, but when i try to download or to show me the purchased apps etc. it unfortunately does not work anymore.. :/
But lately I remembered the name of most of the Apps..
I hope it will be fixed soon
Cheers!
Here is reinstaller v1.0 which actually works better than v1.5...what a shame...
Hope it will help...
Dev Response
All - I am the developer of this app and while I'm really sorry that some of you are running in to these problems, it seems it is not affecting everyone alike.
There are some reviews that report that the app works just fine for them even with the update.
My take is that some kind of hardware/software variation is involved in this problem (after all, it made it through certification).
I'm working on this problem and will submit another update today. However, it will still be a week before it reaches you.
Thanks for your support and sorry again for the incovenience caused.
- Ashish
Hi, first, thanks a lot for this app, it's a must have...
Secondly, thanks for your care, I'm so disappointed for not being able to test 1.5...and will see, today if I have enough time, if it's a matter of rom...but it would be surprising as 1.0 is just working fine...
Good luck, hope you'll find the way out of this trouble easily
Testers invited
Just fixed a few things and would like to know if you can test the XAP file for the following issues -
1. App not able to fetch app list for non-US Live IDs
2. App crashing when tapping the Install button after app scan is finished
3. App crashing when clicked on Install button on the app/games selection page
Drop me note as ashish [at] wpfied.com if you see any of the above issues along with your device, Live ID country and WP build number (if possible).
Thanks.
Thanks for that! I was having the same problem as stated. I'm so used to having an unlocked phone, with my Focus, that I tried to load the QR Xap on the Lumia 900! Can't wait for full access...
ashyshs said:
Just fixed a few things and would like to know if you can test the XAP file for the following issues -
1. App not able to fetch app list for non-US Live IDs
2. App crashing when tapping the Install button after app scan is finished
3. App crashing when clicked on Install button on the app/games selection page
Drop me note as ashish [at] wpfied.com if you see any of the above issues along with your device, Live ID country and WP build number (if possible).
Thanks.
Click to expand...
Click to collapse
Sent you an email...i'm experiencing the issue n'3...
NebZoNe said:
Here is reinstaller v1.0 which actually works better than v1.5...what a shame...
Hope it will help...
Click to expand...
Click to collapse
Can you provide another one as this one wont install. Think it's a problem with certificate.
Edit** Nevermind, just used Multiple XAP Installer http://forum.xda-developers.com/showthread.php?t=943842 as it signs it before installing, and all went well.
Revision 2
Thanks to those tested it. I've some more changes and would like you all to test it once again for me -
1. Apps/Games pivot is gone since it doesn't seem to work for non-English phones
2. Need to test if tapping install button on the app selection page still crashes the app
Thanks,
Ashish
ashyshs said:
Thanks to those tested it. I've some more changes and would like you all to test it once again for me -
1. Apps/Games pivot is gone since it doesn't seem to work for non-English phones
2. Need to test if tapping install button on the app selection page still crashes the app
Thanks,
Ashish
Click to expand...
Click to collapse
This one worked perfect!
The second .xap you posted here is better, now it counts my apps, i tested it, and i works. but it is supposed to be that we tap every app manually to install after it opens the marketplace?
tested device: htc 7 pro
OS: 7.10.8107.**
Language settings on German
location setings also.
APP Works.
On HTC Titan it crashes when I click on Install after I download the list of the apps. Even if I select only one of them ...
If any one has any information on Samsung and there progress on fixing the bugs with the low energy bluetooth 4.0 can you plz update us all and post it here.
Thanks!
Ill post everything i know here as well.
1. Samsung Developers thread on the issue
http://developer.samsung.com/forum/...geId=157757&messageNumber=1168&startId=zzzzz~
2. NRF Utility
I know that the app in the andriod market called NRF Utility can scan and find ble devices one your GS3!
https://play.google.com/store/apps/details?id=com.nordic.nordicbleapp&hl=en
3. These people seem very educated on the matter and one thinks he know how to solve this.
http://stackoverflow.com/questions/11311947/how-to-use-broadcom-ble-sdk-smart-4-0-in-android-4-0
4. Info on a development kit.
http://stackoverflow.com/questions/...y-development-kit-must-have-proximity-profile
5. Say what? uhh i dont think so.
Unfortunately, there are no Bluetooth 4.0 (which Bluetooth LE is a part of) libraries built into android right now. In order to connect an android device to a Bluetooth 4.0 connection, you must do it for a specific device, and that device's manufacturer must have released a bluetooth 4.0 SDK. There is an open bluetooth low-energy SDK for Android
Click to expand...
Click to collapse
- John Leehey
http://stackoverflow.com/tags/bluetooth-lowenergy/new
6. The reason im in the to win this!
I want my gb 6900 g-shock watch to pair with my GS3!!! UGH
http://forum.xda-developers.com/showthread.php?t=1572175&page=2
Read forum rules before posting
Questions go in Q&A
Development is for developers to post releases
Thread moved
FNM
This sucks
"I want my gb 6900 g-shock watch to pair with my GS3!!! UGH"
I am a app developer and I need Bluetooth 4.0 in order to develop hardware for my own phone. As of now i'm using Apples Iphone 5 " Samsung's Competitor" to develop my apps and Hardware. This does not look good on Samsung's part. I really hope this gets figured out. The Galaxy S3 is the top selling phone as of right now. It is also my favorite in terms of use but. The fact that they advertised 4.0 support this sucks!
I am with you on that bro. Got the gb 6900 on my wrist right now but no application to really take advantage of the ble. Just in case you dont know, you can always check that the SGS3 can see the GB 6900 using the "Bluetooth Smart Scanner" application tool found through play.
I also have a Moto Droid 4 which can natively see the watch using the Bluetooth page in settings but I am afriad I have to perhaps look into the developing my own app.
cantoucthis said:
"I want my gb 6900 g-shock watch to pair with my GS3!!! UGH"
I am a app developer and I need Bluetooth 4.0 in order to develop hardware for my own phone. As of now i'm using Apples Iphone 5 " Samsung's Competitor" to develop my apps and Hardware. This does not look good on Samsung's part. I really hope this gets figured out. The Galaxy S3 is the top selling phone as of right now. It is also my favorite in terms of use but. The fact that they advertised 4.0 support this sucks!
Click to expand...
Click to collapse
sirius_dark said:
you can always check that the SGS3 can see the GB 6900 using the "Bluetooth Smart Scanner" application tool found through play..
Click to expand...
Click to collapse
thanks man i didnt know that app existed and im trying its not working for me and consiquently neither is the nrf utility :'( some **** show this ble stuff is.
halabuloogy said:
thanks man i didnt know that app existed and im trying its not working for me and consiquently neither is the nrf utility :'( some **** show this ble stuff is.
Click to expand...
Click to collapse
The nRF Utlility from Nordic, i couldnt even download from the Play Store because my phone is marked as "SAMSUNG-SGH-I747" which is at^t's SGS3. I wish there was a way i could download the .apk file from Play Store or even somewhere on the internet.
I am going to check if Nordic has put it on their developer site.
The application i mentioned only just discovers the Bluetooth 4.0 devices and doesnt connect to them. At the moment it is just good enough for proof that Samsung indeed has a Bluetooth Low Energy module in the SGS3.
If you can give me more info on your SGS3 such as network carrier, what rom and kernel you are using, perhaps i might be able to figure out why it is not working for you.
halabuloogy said:
thanks man i didnt know that app existed and im trying its not working for me and consiquently neither is the nrf utility :'( some **** show this ble stuff is.
Click to expand...
Click to collapse
I just checked Nordic's website, unfortunately they dont have the .apk listed in the downloads section only the blasted iOS version of nRF
Also, i attached the incompatibility error i am getting when i try to download nRF from the Play store. Don't think you have the .apk for nRF Utility do you? Any way you know we can actually download the .apk from the play store?
N-01D ***and thats a zero not a O***
sirius_dark said:
I just checked Nordic's website, unfortunately they dont have the .apk listed in the downloads section only the blasted iOS version of nRF
Also, i attached the incompatibility error i am getting when i try to download nRF from the Play store. Don't think you have the .apk for nRF Utility do you? Any way you know we can actually download the .apk from the play store?
Click to expand...
Click to collapse
i have the sprint and my build is "SPH-L710" but sorry no i dont have the apk mabey try switch up ur boot loader to build moder number "N-01D" its one of the phone the gshock watch is acualy compatible with and if you download market enabler and use japan domoco mode u can download the gshock app from play and open the bluetooth setting!!!
i figured it out!
sirius_dark said:
The nRF Utlility from Nordic, i couldnt even download from the Play Store because my phone is marked as "SAMSUNG-SGH-I747" which is at^t's SGS3. I wish there was a way i could download the .apk file from Play Store or even somewhere on the internet.
I am going to check if Nordic has put it on their developer site.
The application i mentioned only just discovers the Bluetooth 4.0 devices and doesnt connect to them. At the moment it is just good enough for proof that Samsung indeed has a Bluetooth Low Energy module in the SGS3.
If you can give me more info on your SGS3 such as network carrier, what rom and kernel you are using, perhaps i might be able to figure out why it is not working for you.
Click to expand...
Click to collapse
MARKET ENABLER!!!!! and mabey build prop that bad boy. you will be able to download it. but thanks i figured it out after the first time you pair your watch hasto be cleared again!!! to do so you have to go to "set up" click start twice then hold down "split-reset" button!!! GO FIGURE!!! darn japs
halabuloogy said:
MARKET ENABLER!!!!! and mabey build prop that bad boy. you will be able to download it. but thanks i figured it out after the first time you pair your watch hasto be cleared again!!! to do so you have to go to "set up" click start twice then hold down "split-reset" button!!! GO FIGURE!!! darn japs
Click to expand...
Click to collapse
Ha ha! Yeah i was about to head to Market Enabler but just didnt want to risk rooting my att SGS3. The phone is my lifeline at the moment and given I am travelling, i am contemplating if i should root it. I just did the root to a Droid 4 but alas i dont know the market code for japan play store. As i understand google gives each country/region a specific "market code" or a "play code"
I am sure someone has figured out and listed all the market codes for each country... in Xda just going to do that soon after i finish replying.
But hey, thanks for the tip! I really appreciate it.
S3 and G-shock Gb-6900 bluetooth
sirius_dark said:
Ha ha! Yeah i was about to head to Market Enabler but just didnt want to risk rooting my att SGS3. The phone is my lifeline at the moment and given I am travelling, i am contemplating if i should root it. I just did the root to a Droid 4 but alas i dont know the market code for japan play store. As i understand google gives each country/region a specific "market code" or a "play code"
I am sure someone has figured out and listed all the market codes for each country... in Xda just going to do that soon after i finish replying.
But hey, thanks for the tip! I really appreciate it.
Click to expand...
Click to collapse
pls is there anybody out there who tried to connect the gb-6900 bluetooth g-shock with a Samsung S3 !!!!! My G-shock bluetooth will be deliverd soon !
[email protected] said:
pls is there anybody out there who tried to connect the gb-6900 bluetooth g-shock with a Samsung S3 !!!!! My G-shock bluetooth will be deliverd soon !
Click to expand...
Click to collapse
Hi! yes. You would first need to make sure you have the JB official ROM upgrade from at&t through Kies or rooted and unlocked bootloader SGS3 running JB. Unfortunately, there is no official app from Casio for SGS3 as G-Shock+ exists for iOS yet, but you can download nRF Utility from market and then use the watch as a proximity device.
gb600 and s3
sirius_dark said:
I just checked Nordic's website, unfortunately they dont have the .apk listed in the downloads section only the blasted iOS version of nRF
Also, i attached the incompatibility error i am getting when i try to download nRF from the Play store. Don't think you have the .apk for nRF Utility do you? Any way you know we can actually download the .apk from the play store?
Click to expand...
Click to collapse
the nordic nRF utility connected my s3 and the casio gb6900 only once ! After that it doesn't connected anymore, the other app such as Bluetooth smart scanner or other android apps doesn't scan the bluetooth watch at all.
japanese apk
sirius_dark said:
Hi! yes. You would first need to make sure you have the JB official ROM upgrade from at&t through Kies or rooted and unlocked bootloader SGS3 running JB. Unfortunately, there is no official app from Casio for SGS3 as G-Shock+ exists for iOS yet, but you can download nRF Utility from market and then use the watch as a proximity device.
Click to expand...
Click to collapse
The nordic nRF utility does connected to my s3 and the casio gb6900.
It even was connecting better than the official G-shock app ( from the apple store) and my partners iphone 5
I'm not a developer but does it mean i have to wait until casio, android, or samsung work on that ?
Does it work with the japanes g-shock app from their store ? (this app supports a gb-6900 bt reports the description)
[email protected] said:
the nordic nRF utility connected my s3 and the casio gb6900 only once ! After that it doesn't connected anymore, the other app such as Bluetooth smart scanner or other android apps doesn't scan the bluetooth watch at all.
Click to expand...
Click to collapse
have you tried to clear the bond between the casio gb6900 and nRF utility and Bluetooth smart scanner or other android apps? I believe you can do that by going to the setup screen on the watch and then keep the split.reset button pressed on the watch. What other apps other than Bluetooth Smart Scanner and nRF Utility have you found on android/for sgs3 that use BLE to connect?
---------- Post added at 02:39 PM ---------- Previous post was at 02:32 PM ----------
[email protected] said:
The nordic nRF utility does connected to my s3 and the casio gb6900.
It even was connecting better than the official G-shock app ( from the apple store) and my partners iphone 5
I'm not a developer but does it mean i have to wait until casio, android, or samsung work on that ?
Does it work with the japanes g-shock app from their store ? (this app supports a gb-6900 bt reports the description)
Click to expand...
Click to collapse
I have yet to try the official G-Shock+ app for iOS. I try to stay away(physically and mentally) from any iOS device. You may be right on the on the "better connectivity " as i know Apple did screw up the Dual Mode Bluetooth chipset on the iPhone 4S...which they might have carried on with iPhone 5.
Yes, you would have to wait untill casio develops something or untill there is a API from Samsung for BLE development for Android. I think the latter one is more important as once there is a API, not only Casio can develop a full fledged app but also many individual developers. Samsung is the real sucker in this.
You hafto go into setup in watch menu then hit "start stop" twice then hold in reset. Then search for the watch again.
Sent from my SPH-L710 using xda app-developers app
halabuloogy said:
You hafto go into setup in watch menu then hit "start stop" twice then hold in reset. Then search for the watch again.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
That is exactly what i said in my reply. Maybe you overlooked it. Oh and there is a newer version of nRF Utility. Now you can have the watch beep or find the watch as you press "Find My Tag"..and the watch beeps in case you misplace the watch. It didnt work earlier. :good:
wait en see
sirius_dark said:
have you tried to clear the bond between the casio gb6900 and nRF utility and Bluetooth smart scanner or other android apps? I believe you can do that by going to the setup screen on the watch and then keep the split.reset button pressed on the watch. What other apps other than Bluetooth Smart Scanner and nRF Utility have you found on android/for sgs3 that use BLE to connect?
---------- Post added at 02:39 PM ---------- Previous post was at 02:32 PM ----------
I have yet to try the official G-Shock+ app for iOS. I try to stay away(physically and mentally) from any iOS device. You may be right on the on the "better connectivity " as i know Apple did screw up the Dual Mode Bluetooth chipset on the iPhone 4S...which they might have carried on with iPhone 5.
Yes, you would have to wait untill casio develops something or untill there is a API from Samsung for BLE development for Android. I think the latter one is more important as once there is a API, not only Casio can develop a full fledged app but also many individual developers. Samsung is the real sucker in this.
Click to expand...
Click to collapse
I've mailed casio and didn't get a satisfied answer , they only mentioned the support information on their website !
Samsungs didn't respond at all, and their developsite doesn't show any activity on that matter.
l'll just have to wait and see ....
[email protected] said:
I've mailed casio and didn't get a satisfied answer , they only mentioned the support information on their website !
Samsungs didn't respond at all, and their developsite doesn't show any activity on that matter.
l'll just have to wait and see ....
Click to expand...
Click to collapse
Well thanks for the effort. Many people before you have done that and got the same response. I dont know why Samsung is not at the top of the matter on this..especially if they really want to seal the deal for SGS3.
It could be that android/google is really pushing for NFC and not so much on BLE because iOS is pushing more on BLE and not so much on NFC.
I tell you these corporate battles just are hindrances to potential opportunity to many technologies and developers. Shame on them!
Update on Android App from Casio
I have some good news to share. We should be getting an Android based app from Casio. See this link
http://www.pocket-lint.com/news/49231/casio-g-shock-gb-5600a-iphone-pictures-hands-on
"It will work only with iPhone at present - because of the app support - but an Android app is in the pipeline for release later in the year."
Another site i found reporting says around end of summer.
http://www.theverge.com/2013/1/8/38...-bluetooth-watch-coming-to-the-us-this-summer
My iGo firmware is 3 years out of date and i was wondering if anyone has managed or bothered to update the software for it. The maps are fine as I can get but firmware is another matter. I have tried to just install a later .apk file but that didnt work. Anyone?
i thought about downloading the store version, but it is a little pricey and wasn't sure it would work right
CadillacMike said:
i thought about downloading the store version, but it is a little pricey and wasn't sure it would work right
Click to expand...
Click to collapse
I downloaded it a few weeks ago from the Play Store. It is a bit expensive but it looks like an awesome and is very easy to use.
Sent from my SM-N930T using Tapatalk
Store version? Is this the iGo software update or app from play store? is it an .apk file? Can you supply more info thanks for the response by the way.
roscored1000 said:
Store version? Is this the iGo software update or app from play store? is it an .apk file? Can you supply more info thanks for the response by the way.
Click to expand...
Click to collapse
i just downloaded the Play Store version on my phone to see what the latest version looks like. Looks way cooler than the one I got from Joying.
However I'm so tied into Google, nothing can really beat Google Maps, other than it is just painfully slow on the Joying
hi thanks for the response. I will have a look too. yes i agree with you about google maps i have only used it once because it needs a live internet connection to work properly, but it was good to use.
FYI (for those who don't know) the iGO version from Joying is pirated. I had confirmed this the iGO makers. The serial they provided was not authentic. The one from the Play store is and will be able to give you fully updated maps, poi, and some others after the purchase. I would recommend if you can afford it. It is very easy to use if you are driving. The best feature is the keyboard, it will allow you to start typing an address and will only allow what is close to it to be typed.
Sent from my SM-N930T using Tapatalk
Interesting using pirated software. I am currently trying the sygic software as it seems to be a little more graphic and less crowded on screen. Though the volume is low.
I sideloaded a television providers app (Fios Mobile) installed on my device. The app was working perfectly but it just updated and I keep getting the error "Won't run without google play services which are not supported by your device".
I tried reverting back to the previous version but it was a mandatory update, so no dice. I tried sideloading the Google Play store but that did not help.
Is there a workaround for this type of error? The app does not API call any of Google Play Services. It seems like many of the TV apps are dropping support (they encouraged it a few years ago to lower bills) so you buy another Set top box. Other cable apps know you are inserting a device into a HDMI port and disable it from working that way.
I can download each individual TV app and enter my television providers password or mirror from my Android Phone but that would be a huge inconvenience.
Any suggestions? If there an app that will fool my TV app into thinking the play store is installed?
Since every channel pretty much has it's own app now, is there another app that will take its place instead of downloading each channels separate app and entering the password?
Is your firestick rooted? (Sorry, I don't know if they can even be rooted.) If so, there's an Xposed module to allow apps to work without Google Play Services.
Another idea is to get the Fios Mobile app from the Amazon App Store and side load that one onto your Fire TV: https://www.amazon.com/Verizon-Services-Corp-FiOS-Mobile/dp/B00DGVUD9I/
That one may not have any dependencies on Google apps.
Seriously? 5 seconds of looking at general...
https://forum.xda-developers.com/fire-tv/general/installing-google-play-service-rooted-t3574088
TimmyP said:
Seriously? 5 seconds of looking at general...
https://forum.xda-developers.com/fire-tv/general/installing-google-play-service-rooted-t3574088
Click to expand...
Click to collapse
Seriously, you are giving me outdated information???? "Fios Mobile won't run unless you update Google Play Services". It would be nice to know where to find updated compatible versions for each. I have looked at several app stores and none seem to work. So please cut that attitude as your five-second search advice did not get me any further than I was before.
Sizzlechest said:
Is your firestick rooted? (Sorry, I don't know if they can even be rooted.) If so, there's an Xposed module to allow apps to work without Google Play Services.
Click to expand...
Click to collapse
Last I checked the Firestick 2 can't be routed. Please correct me if I am wrong.
Sizzlechest said:
Another idea is to get the Fios Mobile app from the Amazon App Store and side load that one onto your Fire TV: [/url]
Click to expand...
Click to collapse
I tried two different app stores but not that Amazon one. Crossing fingers!!!! DARN. Just tried it and said incompatible, you can't make purchases from this device. Fios does support Kindle fire but as I suspect, they don't want the app as a box substitute like they used too.
Maybe, someone has an updated version of what Timmy P linked too. Hopefully, they will test the link first before making condescending remarks about checking older posts.
allusernamestaken said:
Last I checked the Firestick 2 can't be routed. Please correct me if I am wrong.
I tried two different app stores but not that Amazon one. Crossing fingers!!!! DARN. Just tried it and said incompatible, you can't make purchases from this device. Fios does support Kindle fire but as I suspect, they don't want the app as a box substitute like they used too.
Maybe, someone has an updated version of what Timmy P linked too. Hopefully, they will test the link first before making condescending remarks about checking older posts.
Click to expand...
Click to collapse
Sorry I cant be of more help, but they are working on mine 100 percent. Good luck!
PS: Your OP said NOTHING about outdated services. Dumb piece of **** scum.
TimmyP said:
Sorry I cant be of more help, but they are working on mine 100 percent. Good luck!
PS: Your OP said NOTHING about outdated services. Dumb piece of **** scum.
Click to expand...
Click to collapse
Because when I read that site from the original author it said FTV and FTV stick not 2 dumbass. Then I read the re-post on here claiming FTV 2 from MARCH 2017!! DId you not see where I said everything was working perfectly since September 4th!!!! Technology changes fast little tike. Google also updates and apps do along with it buttercup.
But I assumed someone with such a smug post must be correct but what a surprise you were not cupcake.
Since there is only 1 person who found a fix on the entire internet, it must not be a very easy fix. If it were, he could put it on APK sites for constant updates.
That is why I also asked 1: If there is a workaround. Easy/permanent if possible, so I don't need to worry about this update. Even easier if there is a 3rd party app that would consolidate all the apps and enter my default password for me.
P.S Being smug even when your correct is being an ass, doing so when you are incorrect makes you a stinky diarrhea with **** nuggets still stuck kind of ass.
I take it English isn't your first language?
TimmyP said:
I take it English isn't your first language?
Click to expand...
Click to collapse
Actually, it is but the English language can't adequately describe just how big of a douche you are.
I take it English isn't your first language?
Hello, When using my dasaita i have message or information on the screen from the car. For open doors it works well but the other messages appear with invisible background. It happened with : ice warning, activate or deactivate rearwiper, esp, stop/start.
How can i fix this trouble.
I also have trouble of electric parasites when using rearcam. How can i fix it too ?
Hello I have the same problem
ryanpierce said:
Hello I have the same problem
Click to expand...
Click to collapse
Hello i solved the trouble with the help of a member. Wich car have you ? if it's Peugeot 208 or 2008 i can help you
mykerinos1 said:
Hello i solved the trouble with the help of a member. Wich car have you ? if it's Peugeot 208 or 2008 i can help you
Click to expand...
Click to collapse
hello Yes is 208
mykerinos1 said:
Hello i solved the trouble with the help of a member. Wich car have you ? if it's Peugeot 208 or 2008 i can help you
Click to expand...
Click to collapse
This trouble made me cancel buying the HU, because I consider it critical. Could you please share the solution for a Peugeot 2008? Thanks in advance.
edit background
margartom said:
This trouble made me cancel buying the HU, because I consider it critical. Could you please share the solution for a Peugeot 2008? Thanks in advance.
Click to expand...
Click to collapse
Hello you'll have to edit the canbus.Apk. You can do it by using Root explorer to find the folder ,then rework it with paint for exemple. you can also translate also in your language if not existing yet (with notepad).
mykerinos1 said:
Hello you'll have to edit the canbus.Apk. You can do it by using Root explorer to find the folder ,then rework it with paint for exemple. you can also translate also in your language if not existing yet (with notepad).
Click to expand...
Click to collapse
The solution requires rooting the device. I wonder why the manufacturers haven't fixed the problem. Maybe they are not aware of it.
Anyway, since I don't own the HU (yet), is it possible for you to upload the canbus.apk? Even if I don't buy the HU, it would be interesting to check the messages the canbus sends and experiment with the translation.
margartom said:
The solution requires rooting the device. I wonder why the manufacturers haven't fixed the problem. Maybe they are not aware of it.
Anyway, since I don't own the HU (yet), is it possible for you to upload the canbus.apk? Even if I don't buy the HU, it would be interesting to check the messages the canbus sends and experiment with the translation.
Click to expand...
Click to collapse
I install another rom. Hal9k rom. Its not so difficult To do and the forum can help you. I ll can send you the canbus apk when i go back home. What is your language ? I ll tell you if your language already exist. You have To know that some trouble already exist. Sometimes information from canbus appear very quickly. Another member is looking for repair it.
mykerinos1 said:
I install another rom. Hal9k rom. Its not so difficult To do and the forum can help you. I ll can send you the canbus apk when i go back home. What is your language ? I ll tell you if your language already exist. You have To know that some trouble already exist. Sometimes information from canbus appear very quickly. Another member is looking for repair it.
Click to expand...
Click to collapse
Thank you for your quick reply and time you spend to help. First of all, my language is Greek. My major concern is the messages sent through the canbus about car functions and notifications (for example, ESP off, low fuel, low ambient temperature, unfastened seat belt etc.). When upgrading the factory screen the goal is to add features without losing any.
Is Hal9k ROM addressing these issues? In this thread there is an image of the missing background. It would be very nice to have an updated image with the corrected version.
You mentioned a problem about quick message disappearing. I don't know if there is a specific thread for this problem. Speaking of this, isn't the OK button (seen in the quoted thread's image) responsible for releasing the message? Does it work properly when being pressed?
margartom said:
Thank you for your quick reply and time you spend to help. First of all, my language is Greek. My major concern is the messages sent through the canbus about car functions and notifications (for example, ESP off, low fuel, low ambient temperature, unfastened seat belt etc.). When upgrading the factory screen the goal is to add features without losing any.
Is Hal9k ROM addressing these issues? In this thread there is an image of the missing background. It would be very nice to have an updated image with the corrected version.
You mentioned a problem about quick message disappearing. I don't know if there is a specific thread for this problem. Speaking of this, isn't the OK button (seen in the quoted thread's image) responsible for releasing the message? Does it work properly when being pressed?
Click to expand...
Click to collapse
For the background i can help you. I m not sure that you can add more information from canbus than original. Button OK is present. It work. But i dont use it because message dissapear after des moments. To be honest i dont know if all messages appear. For seat belt it doesnt appear for me. I have for esp wiper light maybe other but i dont know exactly. I ll send you Another message when come back home
I have a Witson MTCE HU installed in my Peugeot 207cc. I have the same issue of the background
I am modified the canbus.apk but when I put it in the system and restart, the messages will no longer appear
I am still testing different possibilities and will keep you updated
Any ideas are also appreciated
mykerinos1 said:
I install another rom. Hal9k rom. Its not so difficult To do and the forum can help you. I ll can send you the canbus apk when i go back home. What is your language ? I ll tell you if your language already exist. You have To know that some trouble already exist. Sometimes information from canbus appear very quickly. Another member is looking for repair it.
Click to expand...
Click to collapse
Can you help me out? I need the edited canbus.apk in english (or portugueseb-br if possible) with the background painted.
And yes sometimes the canbus warning appears in a flash
Im using Hal9k Oreo ROM
Abbas Safieddine said:
I have a Witson MTCE HU installed in my Peugeot 207cc. I have the same issue of the background
I am modified the canbus.apk but when I put it in the system and restart, the messages will no longer appear
I am still testing different possibilities and will keep you updated
Any ideas are also appreciated
Click to expand...
Click to collapse
Any news?
Pacote-san said:
Can you help me out? I need the edited canbus.apk in english (or portugueseb-br if possible) with the background painted.
And yes sometimes the canbus warning appears in a flash
Im using Hal9k Oreo ROM
Any news?
Click to expand...
Click to collapse
Hello Today i'm using The V4 from Hal9k. i send him a message for the trouble with the background. He solved the trouble. If you update i think that you can havea background.
but actually , on this new mod, i unable to modify canbus apk by myself. (i dont look much)
Another members will try to do his own canbus apk but he's very busy and it will be for Peugeot 208/2008.
mykerinos1 said:
Hello Today i'm using The V4 from Hal9k. i send him a message for the trouble with the background. He solved the trouble. If you update i think that you can havea background.
but actually , on this new mod, i unable to modify canbus apk by myself. (i dont look much)
Another members will try to do his own canbus apk but he's very busy and it will be for Peugeot 208/2008.
Click to expand...
Click to collapse
I will contact @segu45 to see if he can help me.
I decompiled the apk with APK EASY TOOL and Im not sure which PNG to edit (box1, box2 etc) to make them a solid color.
It should work after compiled, unless the rom has some specific signature that it checks for (contacted hal9k to ask about that)
I will only migrate to android 9.0 when theres a custom rom for that.
if i remember i edited this file with paint 3d.
MTCCanbus\res\drawable-nodpi-v48\warning_bg.png
I have the .apk with the darkest backgrounds and almost all the colored png In the next few days I will put a link for those who want to change it. It is the last one, valid for all Rom in android 9 and for all vehicles. If someone wants to translate into their language, I can send it in English and when it is translated, compile it in the apk.
Enviado desde mi ONEPLUS A5010 mediante Tapatalk
link to canbus.apk
https://drive.google.com/open?id=1YegU6_2k-2_hQwaFL471ktYrGon0PE5E
Hi,
this can work on px6 MAX10 with android 10? I have similar problem, the message appear with short duration.
My car is 208 2019
segu45 said:
link to canbus.apk
https://drive.google.com/open?id=1YegU6_2k-2_hQwaFL471ktYrGon0PE5E
Click to expand...
Click to collapse
Does anyone have this app? It’s gone from googledrive