Develop Bugs

[Q] Bricked and can't get into download mode.

I have a rooted Sprint G2 and got the notification to update to KitKat, but when I did it restarted and said:
Code:
[15209250] -- reset --
[15209260] -- portcharge --
[15209320] fastboot: processing commands
[15367550] -- reset --
[15367550] EP1/out FAIL nfo=40 pg0=f913600
[15367560] -- reset --
[15367560] -- portcharge --
[15367570] usb_read() trasaction failed
[15367630] fastboot: oops!
[15372860] -- reset --
[15372870] -- portcharge --
And it does this every time I plug it into the computer. I also can't access download mode. I've looked through many tutorials but haven't found success with any of them yet. Am I at a point of no return or is there hope? Any help is greatly appreciated. Thanks!

try a different port on your computer then do (also make sure you have all the drivers installed on computer) (also make sure you have adb and fastboot installed
http://forum.xda-developers.com/showthread.php?t=2477595
(make sure you use sprint files though)

gpitner said:
I also can't access download mode.
Click to expand...
Click to collapse
This is his biggest issue
jcwxguy said:
try a different port on your computer then do (also make sure you have all the drivers installed on computer) (also make sure you have adb and fastboot installed
http://forum.xda-developers.com/showthread.php?t=2477595
(make sure you use sprint files though)
Click to expand...
Click to collapse
so this is useless if he can't even access Download mode to use the flashtool
OP can you access twrp? if you can you can flash this file http://www.rwilco12.com/Files/Garwynn%20Projects/LS980/ZVAtoZVC/ZVCRadio_Full.zip (Thank @garwynn for this if this works) and you should have download mode back if not then you are beyond my knowledge and will need help from a more knowledgeable person

No unfortunately I can't. The same, or very similar thing happened two weeks ago when I was trying to flash TWRP but after the phone ran out of battery and I plugged it back in, it turned on no problem. That didn't happen this time though, so I'm really stuck.

I thought I was bricked also and couldn't get into download mode. This is how I was able to use the flash tool. Vol down and power to get into recovery. You should get an error. Then power off the phone completely. Plug into usb to connect to computer. Then vol up and power for download mode. Make sure you have already installed the driver.
Hope this helps.

kleen3r said:
I thought I was bricked also and couldn't get into download mode. This is how I was able to use the flash tool. Vol down and power to get into recovery. You should get an error. Then power off the phone completely. Plug into usb to connect to computer. Then vol up and power for download mode. Make sure you have already installed the driver.
Hope this helps.
Click to expand...
Click to collapse
I just tried your method and it keeps going back to the same screen. I forgot to mention that I only get those lines of code when I plug my phone into the computer, but when my phone restarts the only code present is:
Code:
[470] Fastboot mode started
[520] udc_start()

Jbcarrera said:
This is his biggest issue
so this is useless if he can't even access Download mode to use the flashtool
Click to expand...
Click to collapse
the point of that thread is to flash the laf partition using fastboot, (which is download mode).
here is a laf.img
http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware/zv8_partitions/laf.img
(might also need to flash the boot.img
http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware/zv8_partitions/boot.img
*in cmd prompt, go to the folder where you have fastboot (copy both laf.img and boot.img to same folder), then do fastboot flash laf.img and fastboot flash boot.img.
( cd C:\Program Files (x86)\Minimal ADB and Fastboot ) (just an example)
once flashed, you should be able to get into download mode.
Ive had the exact screen you have had before, and this is what i had to do to get download mode to work.
gpitner said:
I just tried your method and it keeps going back to the same screen. I forgot to mention that I only get those lines of code when I plug my phone into the computer, but when my phone restarts the only code present is:
Code:
[470] Fastboot mode started
[520] udc_start()
Click to expand...
Click to collapse

I have to have Android SDK tools installed right?

Yes, you will need the SDK tools installed.
Just wanted to point out something real quick here, I see up a couple posts back, you pushed the power button for D/L mode but you do not hit the power button at all to get into D/L mode, you only need to hold VOL+ and plug the USB into the computer, this starts download mode. Once you get D/L mode back.
I had a very similar problem, when I flashed D801 rom on my LS980, I believe what I did was, to flash .boot as jcwxguy suggested but I think I also flashed .recovery both in fastboot mode with ADB and that brought back my D/L mode, here is a guide, http://forum.xda-developers.com/showthread.php?t=2131284 , go to FLASHING YOUR FILES IN FASTBOOT. best of luck!

So i flashed both files, thank you by the way, and they both flashed just fine but I still can't get into download mode. Here's the corresponding output on the phone and also what command prompt showed.
Code:
[5376060] fastboot: getvar:partition-type:laf
[5376180] fastboot: getvar:max-download-size
[5376440] fastboot: download:00f00000
[5376980] fastboot: flash:laf
[5377030] partition_get_size 33554432 bytes
[5416180] fastboot: getvar:partition-type:boot
[5416280] fastboot: getvar:max-download-size
[5416490] fastboot: download:00a00000
[5416870] fastboot: flash:boot
[5416930] partition_get_size 16777216 bytes
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

same procedure, flash the recovery partition, http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware/zv8_partitions/recovery.img

So I have myself a little conundrum. The phone's battery is dead so when it charges enough to turn on and install the update it dies halfway through the installation. Is there anyway to keep it from installing the update so it can charge enough?

Man, wish I could help out here but not sure about that one, maybe someone more knowledgeable out there knows a way out of this?

Nevermind, I was able to use a charger at my university that has a higher voltage output for quicker charging and it worked. My phone is fully functional. Thank you too everybody who helped and provided the appropriate files, you have no idea how happy I am!

cool, glad to hear you got it worked out. Congrats :good:

Vibe p1 black screen with blue led

i just bought lenovo p1 and it's my first time to buy a lenovo phone EVER!
and i definitely regret it! i tried to get the lastest rom update by using Lenovo Moto Smart Assistant it says failed to rom and my phone is just dead!
i didn't even use the phone for 12 hours! and my phone is just dead black screen with blue led and it won't turn back on!
i tried volume + and home button and nothing happens when i connect it to the pc nothing happens to the phone but on the pc i get a format notification to drives that i don't have on the pc and those drives disappear when i disconnect the phone.

Afn5 said:
i just bought lenovo p1 and it's my first time to buy a lenovo phone EVER!
and i definitely regret it! i tried to get the lastest rom update by using Lenovo Moto Smart Assistant it says failed to rom and my phone is just dead!
i didn't even use the phone for 12 hours! and my phone is just dead black screen with blue led and it won't turn back on!
i tried volume + and home button and nothing happens when i connect it to the pc nothing happens to the phone but on the pc i get a format notification to drives that i don't have on the pc and those drives disappear when i disconnect the phone.
Click to expand...
Click to collapse
First press your power button for 1 min to completly off your phone.
2. PRESS volume + and connect your phone to pc
3. if u hear any song, make a screenshot about device manager and upload it to here for me.

Starchm said:
First press your power button for 1 min to completly off your phone.
2. PRESS volume + and connect your phone to pc
3. if u hear any song, make a screenshot about device manager and upload it to here for me.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i didn't hear a song it just vibrated

Afn5 said:
i didn't hear a song it just vibrated
Click to expand...
Click to collapse
https://forum.xda-developers.com/vibe-p1/how-to/lenovo-vibe-p1-a42-c72-root-ready-t3533693
Do the 1, 2 , 3 , 6 , 7 ,8 steps, then load rawprogram0.xml and patch 0 then press dload button.

Starchm said:
https://forum.xda-developers.com/vibe-p1/how-to/lenovo-vibe-p1-a42-c72-root-ready-t3533693
Do the 1, 2 , 3 , 6 , 7 ,8 steps, then load rawprogram0.xml and patch 0 then press dload button.
Click to expand...
Click to collapse
my phone is working!! thank you so much!!:laugh::laugh:

I had the same issue and followed steps to solve successfully but got boot loop after QFIL restore, any ideas?

ferchorama said:
I had the same issue and followed steps to solve successfully but got boot loop after QFIL restore, any ideas?
Click to expand...
Click to collapse
Do a qfil reflash again.

Before the issue I made a TWRP backup, then I installed an AOSP, then made a system restore, then a full TWRP restore. Got boot loop and then did QFIL restore and bootloop again, QFIL restore again and still bootloop.

ferchorama said:
Before the issue I made a TWRP backup, then I installed an AOSP, then made a system restore, then a full TWRP restore. Got boot loop and then did QFIL restore and bootloop again, QFIL restore again and still bootloop.
Click to expand...
Click to collapse
Do u have animation in lenovo logo?

No, just static logo. I just deleted all partitions and created a single ext4 partition, tried QFIL again and still bootloop.

Go into recovery and reboot to bootloader. Connect phone to pc via usb cable open up a cmd screen make sure adb, fastboot and device drivers are installed. Enter stock rom location and open terminal in that folder.Enter this commands:
fastboot devices
(if a device shown then continue)
fastboot -i 0x1ebf erase boot
fastboot flash boot boot.img
fastboot reboot
this must fix if not we can look other solutions.

I can detect device in fastboot:
Code:
fastboot devices
6c3edc24 fastboot
Code:
fastboot.exe -i 0x1ebf erase boot
<waiting for any device >
Then tried:
Code:
fastboot erase boot
fastboot flash boot boot.img
fastboot reboot
Still bootloop

Reflash with qfil 1 or 2 times more pls.

Sepkov said:
Reflash with qfil 1 or 2 times more pls.
Click to expand...
Click to collapse
I've flashed lots of times with QFIL but I get the same result, tried formating to ext4, restoring qcn and nothing gets it out of bootloop.
Then I tried as follows:
I flashed TWRP 3.1.0.0
Flashed AospExtended (No sim or baseband detected)
Rooted
Downloaded the qcn file lenovoP1c58.qcn
Tried with the qcn restore option in QFIL but now it seems there is an issue with the connection. I followed the steps:
adb shell
su
setprop sys.usb.config diag
Click to expand...
Click to collapse
And I get the error in QFIL in attachment, any suggestions please?

same situation please help
hello I tried the method which u have provided even after pressing the power off button for 2-3 min the device is not shutting off, but the led light does blink for a second.
Please suggest
Starchm said:
First press your power button for 1 min to completly off your phone.
2. PRESS volume + and connect your phone to pc
3. if u hear any song, make a screenshot about device manager and upload it to here for me.
Click to expand...
Click to collapse

David95120 said:
hello I tried the method which u have provided even after pressing the power off button for 2-3 min the device is not shutting off, but the led light does blink for a second.
Please suggest
Click to expand...
Click to collapse
Open your phone and disconnect battery.

hay i have the same problem but i cant see any thing new in device manager ,and the pc cant recognize the phone

Any way to enter EDL mode without disassembling the phone?

Vol up/down + USB cable doesn't work, and I read one post that says the deep flash cable doesn't work either. Bootloader is locked.
I have the full body ceramic version, so there aren't any disassembly directions available so I could take it apart and ground the EDL points...
Current ROM is just boot looping, wiping data doesn't help, and only ROM I seem to be able to flash is the same one (latest global beta).... Just want to downgrade back to global stable.
Any info would be greatly appreciated!

Can't you boot to fastboot? What's the error when you attempt to flash anything else? Can you access TWRP?

I have done it a few times, there is some key combination I used but can't remember what it was

Benjimaestro said:
Can't you boot to fastboot? What's the error when you attempt to flash anything else? Can you access TWRP?
Click to expand...
Click to collapse
Edit: okay... yes, I got it into fastboot mode now. Don't know what I struggled with that key combo so much.
What can I actually do from here to reflash, since bootloader is locked?

phzi said:
Edit: okay... yes, I got it into fastboot mode now. Don't know what I struggled with that key combo so much.
Click to expand...
Click to collapse
Just flash MIUI from there then, it should work provided that you unlocked the bootloader.

Benjimaestro said:
Just flash MIUI from there then, it should work provided that you unlocked the bootloader.
Click to expand...
Click to collapse
phzi said:
bootloader is locked
Click to expand...
Click to collapse
This would be easy if bootloader wasn't locked, I know.

Should be able to use MiFlash tool? And download a fastboot flash rom from xiaomi website

phzi said:
This would be easy if bootloader wasn't locked, I know.
Click to expand...
Click to collapse
Did you try xiaomitool already? http://www.xiaomitool.com/

CrazyBeaver2377 said:
Did you try xiaomitool already? http://www.xiaomitool.com/
Click to expand...
Click to collapse
Yes. When you start it from recovery, it says it needs ADB, and reboots the phone to OS (which bootloops - no way to activate ADB in OS).
Edit: Same with starting XiaomiTool when in FastBoot - it needs ADB enabled from the OS....

Hello, hello! Here's the link how to disassemble mix2:
1obzor.com/news/razborka-xiaomi-mi-mix-2.html
after opening here is the instruction on how to enter EDL mode:
en.miui.com/thread-1351514-1-1.html
links without the htts: // prefix
since I'm a new member

This was happened to my xiaomi Max.
i tried using fastboot to boot into EDL, it didnt work.
using fastboot-edl -> reboot.bat, it show success message but actually my phone only restarted and stuck in "Mi" Logo.
what i did to boot into EDL are :
- While phone still connected to pc and phone in fastboot mode i try to hold the power button
- After the screen blinked (it restarted), i pressed both vol + and vol - and after i hear a plug in sound in my PC Windows i release the power button
- Then the screen will stay Blank (With background light) but after i refresh MiFlash application, it will detected as COM20 or something.
- Then i do flashing and it works!
Hope it will help to solve your problem

To enter EDL on mix 2 without disassembling. Boot the phone into bootloader then you type "fastboot oem edl" on your computer then you can flash the phone normally with mi flash tool. Hope this suggestion can help!

the miui version cant be installed on this device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am an idiot i have self inflicted this issue. I flashed from 8.11.8 to 10.0.0.1 i mistake clicked flash and lock.bat now the device is locked and will not boot. Got deep flash cable but not able to switch off the device to get into 9008 mode. please someone direct me. I am getting frustrated and loosing hope. Cannot boot into edl as bootloader locked. cannot recovery as I have no twrp. cannot unlock as device is not bound to account. cannot debug mode as device will not boot to OS. I have truly made my life complicated not purposely. cannot shutdown the device to get into Deep flash mode
Thank you people, apologies for wasting your time.

Same situation.. still trying to find a way to get out of this. But i can help you somehow as i figured out how u can switch off the phone.
1. Copy and rename any file to twrp.img and save it in a folder
2. Open cmd and change directory to where u saved the twrp.img file
3.Just boot into fastboot and type this command
fastboot boot twrp.img
It will try to push this to your phone ane eventually fail. You will get a message on your phone saying "system destroyed and press power button to switch off"
Thats how i switch it off each time lol

emiratiprince said:
Same situation.. still trying to find a way to get out of this. But i can help you somehow as i figured out how u can switch off the phone.
1. Copy and rename any file to twrp.img and save it in a folder
2. Open cmd and change directory to where u saved the twrp.img file
3.Just boot into fastboot and type this command
fastboot boot twrp.img
It will try to push this to your phone ane eventually fail. You will get a message on your phone saying "system destroyed and press power button to switch off"
Thats how i switch it off each time lol
Click to expand...
Click to collapse
getting this thing into EDL mode seems impossible now as it just reboots
my issue is i flashed global over chinese device and accidentally locked bootloader and also had signed out my mi account. i dont wanna take off the back off this thing but button combo for EDL not working at all

shingers5 said:
getting this thing into EDL mode seems impossible now as it just reboots
my issue is i flashed global over chinese device and accidentally locked bootloader and also had signed out my mi account. i dont wanna take off the back off this thing but button combo for EDL not working at all
Click to expand...
Click to collapse
Same here but intentionally lock it for resale purposes. Did not know it would brick. But the trick to switch it off still work.
Btw, Me too i don't want to open the back cover but it seems the only solution. I have already ordered my prying tools.
---------- Post added at 04:24 AM ---------- Previous post was at 04:09 AM ----------
Apparently there's a work around for not opening the phone..Try this https://youtu.be/2xYBEg-AXjc
Hychess pmed me this link

emiratiprince said:
Same here but intentionally lock it for resale purposes. Did not know it would brick. But the trick to switch it off still work.
Btw, Me too i don't want to open the back cover but it seems the only solution. I have already ordered my prying tools.
---------- Post added at 04:24 AM ---------- Previous post was at 04:09 AM ----------
Apparently there's a work around for not opening the phone..Try this https://youtu.be/2xYBEg-AXjc
Hychess pmed me this link
Click to expand...
Click to collapse
https://unbrick.ru/
thats who helped me and it was quick and painless. you do have to take the back cover off and the silver plate. touch the 2 bottom pins, first 2 on bottom row and plug in usb cable. phone has to be off. just unplug the battery and back in. phone is back but now have to wait 360 hours to unlock bootloader. oh well

Question Realme GT Master Edition EDL Controls

EDL Auth bypass available for Realme GT Master Edition With this tool https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
Flashing the device Via EDL:
Run ROM2box.exe
on phone go to recovery Mod, insert usb cable multiple times press recovery version from the popup select OK, (test point require for dead phones)
on ROM2box Go to Oppo/New/ From the drop down select GT Master Edition Click Connect loader button
once done, Process flash, at the bottom flasher select extracted ofp folder
click download button, wait until success, it will take 10-15min
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
to make a firmware Reading XML edit rawprogram0 from firmware folder and Send it though send XML Option demo file attached..

Can you explain a video? please

This application is very interesting. I wanted to ask something:
1) Is there to use the xml file that is in the post?
2) just what to give the path of the extracted ofp rom and then hit download? All the extracted files must be in the same folder I guess. is that so?
If so, it is a very good solution for our Realme GT Master
Very thanks!!

totmakina said:
This application is very interesting. I wanted to ask something:
1) Is there to use the xml file that is in the post?
2) just what to give the path of the extracted ofp rom and then hit download? All the extracted files must be in the same folder I guess. is that so?
If so, it is a very good solution for our Realme GT Master
Very thanks!!
Click to expand...
Click to collapse
Yes all files must in same folder including all rawprogram*.xml and patch*.xml, attached file also collected from same device however it's converted to read from flash

mark332 said:
Yes all files must in same folder including all rawprogram*.xml and patch*.xml, attached file also collected from same device however it's converted to read from flash
Click to expand...
Click to collapse
The attached file should then be placed as you say in the same folder as the extracted rom? Perfect!

totmakina said:
The attached file should then be placed as you say in the same folder as the extracted rom? Perfect!
Click to expand...
Click to collapse
At the moment I only access edl from the adb reboot edl command. I cannot access from fastboot with the fastboot reboot edl or fastboot oem edl commands. What command is used to access edl from fastboot?

¿Can you help me with this?
I already put all the files inside the firmware folder

edit rawprogram0,1,2,3,4,5 and delete the lines causing issues

totmakina said:
At the moment I only access edl from the adb reboot edl command. I cannot access from fastboot with the fastboot reboot edl or fastboot oem edl commands. What command is used to access edl from fastboot?
Click to expand...
Click to collapse
do not use on working phone, you can reboot to edl from recovery mod

mark332 said:
do not use on working phone, you can reboot to edl from recovery mod
Click to expand...
Click to collapse
If it's not too much trouble for you, could you explain it to me? If the phone is off, press vol - and connect to the pc or what other way can there be?
Generally when the phone is bricked it does not go into recovery.
thanks for your help

mark332 said:
edit rawprogram0,1,2,3,4,5 and delete the lines causing issues
Click to expand...
Click to collapse
where can I see the lines that cause problems?

totmakina said:
If it's not too much trouble for you, could you explain it to me? If the phone is off, press vol - and connect to the pc or what other way can there be?
Generally when the phone is bricked it does not go into recovery.
to enter EDL mode
With the cell phone off, press the vol + and vol - keys and connect the cell phone to the PC
Click to expand...
Click to collapse

totmakina said:
If it's not too much trouble for you, could you explain it to me? If the phone is off, press vol - and connect to the pc or what other way can there be?
Generally when the phone is bricked it does not go into recovery.
thanks for your help
Click to expand...
Click to collapse
to enter EDL mode
With the cell phone off, press the vol + and vol - keys and connect the cell phone to the PC

I got a lot of errors, what is the solution?
Is it possible to edit rawprogram 0.1.2.3.4.5
RMX3363export_11_C.08
And you upload the rawprogram files 0.1.2.3.4.5 to me
I will be very thankful to you ....

Help "failed to write partition" error Redmi 5A (riva)

I had installed in this phone a custom rom a few months back for my friend. Yesterday he told me that the device froze when he was browsing the phone gallery app, and a few minutes later the phone rebooted and couldn't pass the mi logo (so the system wasn't loading I guessed, because the logo of the ROM wasn't showing). I tried to enter TWRP, but even there the phone would get stuck on the TWRP splash page and rebooted back to the MI logo. So I tried to reinstall TWRP (I have still access to fastboot mode) and, after, a newer version, but the problem was the same. I tried booting a recovery image without installing it (fastboot boot twrp.img) and the problem was similar, but instead of rebooting to the MI logo, the phone would get stuck on the TWRP logo. I tried with OrangeFox recovery too, but same problem. I read in another post that it may be a problem with the /data partition, so I (fastboot erase userdata) and tried again the above recovery installation, but it didn't work. I, then, tried to wipe all partion via fastboot, and tried the command "fastboot erase system -w", but it didn't work either. So I tried the way to restore the phone with MiFlash tool, I found the firmware I needed, I flashed it, and after ~4s it gave me the error "failed to write partiton" (see image).
Spoiler: Image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried with another firmware (this time based on Oreo instead of Nougat), same error. I searched a solution for this error, but I found nothing helpful. Now I have the phone working (=it can power on) and can access to fastboot, but don't know what to do. Can someone out there, with maybe a clearer idea of what's going on, help me? Thanks in advance

Update:
I found out that the problem is flashing this file "gpt_both0.bin" (which is the partition table). Every firmware that I tried failed to flash when trying to fastboot this file. So I tried to remove the line (
Code:
fastboot %* flash partition "%~dp0images\gpt_both0.bin" || @echo "Flash tz error" && exit /B 1
) from the flash_all.bat and everything was flashed without errors, but the phone won't start, so this file is necessary. Flashing it separately gave me the same error (failed to write partition). So, I ask again for help, hoping that someone will come to save me

I have same issue. Did you get any working method?

amitkr.xda said:
I have same issue. Did you get any working method?
Click to expand...
Click to collapse
No, I'm still getting the error and trying to test all that comes to my mind. Maybe one day something will work

TheMagicWafer said:
No, I'm still getting the error and trying to test all that comes to my mind. Maybe one day something will work
Click to expand...
Click to collapse
Does your phone go in fastboot? Mine doesn't, but is recognised as QHSBULK 9008, also it's not recognised in adb devices or mi tool

amitkr.xda said:
Does your phone go in fastboot? Mine doesn't, but is recognised as QHSBULK 9008, also it's not recognised in adb devices or mi tool
Click to expand...
Click to collapse
Yes, my phone goes into fastboot. The name QHSBULK 9008 sounds like the phone goes in edl mode. I'm not sure, but searching around I found out it's the name of the phone when it's recognised as by it's qualcomm drivers, or something similar

TheMagicWafer said:
Yes, my phone goes into fastboot. The name QHSBULK 9008 sounds like the phone goes in edl mode. I'm not sure, but searching around I found out it's the name of the phone when it's recognised as by it's qualcomm drivers, or something similar
Click to expand...
Click to collapse
How can I boot in fastboot? It's not going in fastboot or anything

amitkr.xda said:
How can I boot in fastboot? It's not going in fastboot or anything
Click to expand...
Click to collapse
Only (hardware) method possible is to hold the power button and the volume down(-) button simultaneously and wait for the fastboot screen/logo

TheMagicWafer said:
Only (hardware) method possible is to hold the power button and the volume down(-) button simultaneously and wait for the fastboot screen/logo
Click to expand...
Click to collapse
Nothing works, it's just blank screen, no vibrate, no logo nothing

amitkr.xda said:
Nothing works, it's just blank screen, no vibrate, no logo nothing
Click to expand...
Click to collapse
I'm sorry, but I'm not an expert and I can't help you any further. If one day I find a solution, be sure I'm going to write it here

have u try Miui Nougat Global with clean all and lock option? if yes, looks like your emmc has died

Avisadius said:
have u try Miui Nougat Global with clean all and lock option? if yes, looks like your emmc has died
Click to expand...
Click to collapse
Already tried, and it gave me the same error. I really hope it's not a motherboard issue, because a replacement is not worth it. Thanks anyway