Question Realme GT Master Edition EDL Controls - Realme GT Master Edition

EDL Auth bypass available for Realme GT Master Edition With this tool https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
Flashing the device Via EDL:
Run ROM2box.exe
on phone go to recovery Mod, insert usb cable multiple times press recovery version from the popup select OK, (test point require for dead phones)
on ROM2box Go to Oppo/New/ From the drop down select GT Master Edition Click Connect loader button
once done, Process flash, at the bottom flasher select extracted ofp folder
click download button, wait until success, it will take 10-15min
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
to make a firmware Reading XML edit rawprogram0 from firmware folder and Send it though send XML Option demo file attached..

Can you explain a video? please

This application is very interesting. I wanted to ask something:
1) Is there to use the xml file that is in the post?
2) just what to give the path of the extracted ofp rom and then hit download? All the extracted files must be in the same folder I guess. is that so?
If so, it is a very good solution for our Realme GT Master
Very thanks!!

totmakina said:
This application is very interesting. I wanted to ask something:
1) Is there to use the xml file that is in the post?
2) just what to give the path of the extracted ofp rom and then hit download? All the extracted files must be in the same folder I guess. is that so?
If so, it is a very good solution for our Realme GT Master
Very thanks!!
Click to expand...
Click to collapse
Yes all files must in same folder including all rawprogram*.xml and patch*.xml, attached file also collected from same device however it's converted to read from flash

mark332 said:
Yes all files must in same folder including all rawprogram*.xml and patch*.xml, attached file also collected from same device however it's converted to read from flash
Click to expand...
Click to collapse
The attached file should then be placed as you say in the same folder as the extracted rom? Perfect!

totmakina said:
The attached file should then be placed as you say in the same folder as the extracted rom? Perfect!
Click to expand...
Click to collapse
At the moment I only access edl from the adb reboot edl command. I cannot access from fastboot with the fastboot reboot edl or fastboot oem edl commands. What command is used to access edl from fastboot?

¿Can you help me with this?
I already put all the files inside the firmware folder

edit rawprogram0,1,2,3,4,5 and delete the lines causing issues

totmakina said:
At the moment I only access edl from the adb reboot edl command. I cannot access from fastboot with the fastboot reboot edl or fastboot oem edl commands. What command is used to access edl from fastboot?
Click to expand...
Click to collapse
do not use on working phone, you can reboot to edl from recovery mod

mark332 said:
do not use on working phone, you can reboot to edl from recovery mod
Click to expand...
Click to collapse
If it's not too much trouble for you, could you explain it to me? If the phone is off, press vol - and connect to the pc or what other way can there be?
Generally when the phone is bricked it does not go into recovery.
thanks for your help

mark332 said:
edit rawprogram0,1,2,3,4,5 and delete the lines causing issues
Click to expand...
Click to collapse
where can I see the lines that cause problems?

totmakina said:
If it's not too much trouble for you, could you explain it to me? If the phone is off, press vol - and connect to the pc or what other way can there be?
Generally when the phone is bricked it does not go into recovery.
to enter EDL mode
With the cell phone off, press the vol + and vol - keys and connect the cell phone to the PC
Click to expand...
Click to collapse

totmakina said:
If it's not too much trouble for you, could you explain it to me? If the phone is off, press vol - and connect to the pc or what other way can there be?
Generally when the phone is bricked it does not go into recovery.
thanks for your help
Click to expand...
Click to collapse
to enter EDL mode
With the cell phone off, press the vol + and vol - keys and connect the cell phone to the PC

I got a lot of errors, what is the solution?
Is it possible to edit rawprogram 0.1.2.3.4.5
RMX3363export_11_C.08
And you upload the rawprogram files 0.1.2.3.4.5 to me
I will be very thankful to you ....

Related

S-on - How to manually flash?

forgive my ignorance, i'm new in this kind of stuff, and i need some help.
i would like to flash this new kernel by franco (link below) but i'm confused/lost so can someone give me a step by step instruction? i'd really appreciate it i mean a lot! i've already unlocked the boot loader, its showing as s-on
http://forum.xda-developers.com/showthread.php?t=1646883
Flash the modules package in clockworkmod recovery.
To flash the rest you have to have the android sdk installed and you have to put the boot.img file in the same folder as fastboot.exe. From a command prompt you have to navigate to the folder that has those files and use the command "fastboot flash boot boot.img " while your phone is in fastboot.
Sent from my HTC One X using xda premium
thanks... but can you do it in more specific way? like step 1.1.3.4.5...etc..
mikey0105 said:
thanks... but can you do it in more specific way? like step 1.1.3.4.5...etc..
Click to expand...
Click to collapse
1. Download the Fastbbot files
2. Extract it to the root of your drive (C: or D So you should have a "Fastboot files" folder in your C or D drive
3. Now put the boot-r1.img in the Fastboot files folder
4. Start up command prompt (type "cmd" in the search bar) and navigate to the fast files folder. To navigate to the fastboot files folder you have to type "cd\" and then type "cd\Fastboot files".
5. Now boot your phone into bootloader (by holding down power button for a few seconds until it reboots and then press and hold down the volume down (-) button). And then once in fastboot mode select "Fastboot USB" by pressing the power button.
6. Now type the commands "fastboot flash boot boot-r1.img" and that's it.
that's what im talkin' about shadowboy! thanks so much! 1 big thank you button for you.. cheers mate!
EDIT:
oh BTW, i tried opening CMD, then entered the words above but its not opening, it says cannot find path,
i put my files under 1 folder named it "fastboot"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My mistake it suppose to be "Fastboot" folder not "Fastboot files" folder.
thanks for doing an extra mile to explain this thing to me, really appreciate it.. im starting to learn
No worries.
after it says "finished" i closed the CMD and restarted my phone, so everything is okay after that? it took like 1 second to complete
mikey0105 said:
after it says "finished" i closed the CMD and restarted my phone, so everything is okay after that? it took like 1 second to complete
Click to expand...
Click to collapse
Yes you're done. That's all you have to do.
i forgot to mention, i went to recovery, then installed the modules there via zip file then rebooted the phone
EDIT:
o shoot, is this normal, after rebooting, it wont turn on, i mean, its just showing htc and its been like 4 mins now
mikey0105 said:
i forgot to mention, i went to recovery, then installed the modules there via zip file then rebooted the phone
EDIT:
o shoot, is this normal, after rebooting, it wont turn on, i mean, its just showing htc and its been like 4 mins now
Click to expand...
Click to collapse
No it's not normal. Might have to erase the cache "fastboot erase cache" see if that works
via CMD?
mikey0105 said:
via CMD?
Click to expand...
Click to collapse
Yep via cmd.
heres what ive done, erased cache via cmd >> did the instruction you've given me, then reboot, but still, its just showing the htc logo
mikey0105 said:
heres what ive done, erased cache via cmd >> did the instruction you've given me, then reboot, but still, its just showing the htc logo
Click to expand...
Click to collapse
Instructions:
1 - Enter this command: fastboot erase cache
2 - Flash the boot.img on fastboot with: fastboot flash boot boot—rX.img (replace X by the release number)
3 - Reboot to recovery from the fastboot menu (before booting to system for the first time) and flash the modules package
Those are the instructions from the franco kernel thread..
You should follow those instructions.
i did but its not working now.. im stuck with HTC loading screen
mikey0105 said:
i did but its not working now.. im stuck with HTC loading screen
Click to expand...
Click to collapse
Go and start from scratch is your best bet.

[Q] Bricked and can't get into download mode.

I have a rooted Sprint G2 and got the notification to update to KitKat, but when I did it restarted and said:
Code:
[15209250] -- reset --
[15209260] -- portcharge --
[15209320] fastboot: processing commands
[15367550] -- reset --
[15367550] EP1/out FAIL nfo=40 pg0=f913600
[15367560] -- reset --
[15367560] -- portcharge --
[15367570] usb_read() trasaction failed
[15367630] fastboot: oops!
[15372860] -- reset --
[15372870] -- portcharge --
And it does this every time I plug it into the computer. I also can't access download mode. I've looked through many tutorials but haven't found success with any of them yet. Am I at a point of no return or is there hope? Any help is greatly appreciated. Thanks!
try a different port on your computer then do (also make sure you have all the drivers installed on computer) (also make sure you have adb and fastboot installed
http://forum.xda-developers.com/showthread.php?t=2477595
(make sure you use sprint files though)
gpitner said:
I also can't access download mode.
Click to expand...
Click to collapse
This is his biggest issue
jcwxguy said:
try a different port on your computer then do (also make sure you have all the drivers installed on computer) (also make sure you have adb and fastboot installed
http://forum.xda-developers.com/showthread.php?t=2477595
(make sure you use sprint files though)
Click to expand...
Click to collapse
so this is useless if he can't even access Download mode to use the flashtool
OP can you access twrp? if you can you can flash this file http://www.rwilco12.com/Files/Garwynn%20Projects/LS980/ZVAtoZVC/ZVCRadio_Full.zip (Thank @garwynn for this if this works) and you should have download mode back if not then you are beyond my knowledge and will need help from a more knowledgeable person
No unfortunately I can't. The same, or very similar thing happened two weeks ago when I was trying to flash TWRP but after the phone ran out of battery and I plugged it back in, it turned on no problem. That didn't happen this time though, so I'm really stuck.
I thought I was bricked also and couldn't get into download mode. This is how I was able to use the flash tool. Vol down and power to get into recovery. You should get an error. Then power off the phone completely. Plug into usb to connect to computer. Then vol up and power for download mode. Make sure you have already installed the driver.
Hope this helps.
kleen3r said:
I thought I was bricked also and couldn't get into download mode. This is how I was able to use the flash tool. Vol down and power to get into recovery. You should get an error. Then power off the phone completely. Plug into usb to connect to computer. Then vol up and power for download mode. Make sure you have already installed the driver.
Hope this helps.
Click to expand...
Click to collapse
I just tried your method and it keeps going back to the same screen. I forgot to mention that I only get those lines of code when I plug my phone into the computer, but when my phone restarts the only code present is:
Code:
[470] Fastboot mode started
[520] udc_start()
Jbcarrera said:
This is his biggest issue
so this is useless if he can't even access Download mode to use the flashtool
Click to expand...
Click to collapse
the point of that thread is to flash the laf partition using fastboot, (which is download mode).
here is a laf.img
http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware/zv8_partitions/laf.img
(might also need to flash the boot.img
http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware/zv8_partitions/boot.img
*in cmd prompt, go to the folder where you have fastboot (copy both laf.img and boot.img to same folder), then do fastboot flash laf.img and fastboot flash boot.img.
( cd C:\Program Files (x86)\Minimal ADB and Fastboot ) (just an example)
once flashed, you should be able to get into download mode.
Ive had the exact screen you have had before, and this is what i had to do to get download mode to work.
gpitner said:
I just tried your method and it keeps going back to the same screen. I forgot to mention that I only get those lines of code when I plug my phone into the computer, but when my phone restarts the only code present is:
Code:
[470] Fastboot mode started
[520] udc_start()
Click to expand...
Click to collapse
I have to have Android SDK tools installed right?
Yes, you will need the SDK tools installed.
Just wanted to point out something real quick here, I see up a couple posts back, you pushed the power button for D/L mode but you do not hit the power button at all to get into D/L mode, you only need to hold VOL+ and plug the USB into the computer, this starts download mode. Once you get D/L mode back.
I had a very similar problem, when I flashed D801 rom on my LS980, I believe what I did was, to flash .boot as jcwxguy suggested but I think I also flashed .recovery both in fastboot mode with ADB and that brought back my D/L mode, here is a guide, http://forum.xda-developers.com/showthread.php?t=2131284 , go to FLASHING YOUR FILES IN FASTBOOT. best of luck!
So i flashed both files, thank you by the way, and they both flashed just fine but I still can't get into download mode. Here's the corresponding output on the phone and also what command prompt showed.
Code:
[5376060] fastboot: getvar:partition-type:laf
[5376180] fastboot: getvar:max-download-size
[5376440] fastboot: download:00f00000
[5376980] fastboot: flash:laf
[5377030] partition_get_size 33554432 bytes
[5416180] fastboot: getvar:partition-type:boot
[5416280] fastboot: getvar:max-download-size
[5416490] fastboot: download:00a00000
[5416870] fastboot: flash:boot
[5416930] partition_get_size 16777216 bytes
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
same procedure, flash the recovery partition, http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware/zv8_partitions/recovery.img
So I have myself a little conundrum. The phone's battery is dead so when it charges enough to turn on and install the update it dies halfway through the installation. Is there anyway to keep it from installing the update so it can charge enough?
Man, wish I could help out here but not sure about that one, maybe someone more knowledgeable out there knows a way out of this?
Nevermind, I was able to use a charger at my university that has a higher voltage output for quicker charging and it worked. My phone is fully functional. Thank you too everybody who helped and provided the appropriate files, you have no idea how happy I am!
cool, glad to hear you got it worked out. Congrats :good:

Flashed wrong kernel by mistake

Hi,
I got a little bit of a problem on my head.... I planned to flash CM12.1 on my HOX but i flashed a different boot.img by mistake! Now i cant get the phone into debugging mode and while using hasoonss toolkit it wont see my device cause i cant get it into debugging mode . Any ideas on how to solve the problem? There are a lot of threads inhere about bricked hox but i cant find one talking about the same problem....
Hope i can get some help on this.
Ow and a bit more info, i can get into bootloader and recovery.
go_insane1981 said:
Ow and a bit more info, i can get into bootloader and recovery.
Click to expand...
Click to collapse
if you can get into bootloader then just get the good boot.img and flash it using fastboot flash boot boot.img
Tried that but it won't see my device.
It doesn't apear in my devices.
go_insane1981 said:
It doesn't apear in my devices.
Click to expand...
Click to collapse
When on bootloader/fastboot mode, type
fastboot devices
to check connection
if it returns your device serial no, then it is good for you to
fastboot flash boot boot.img
adb devices is working when in recovery or on running OS, not on bootloader/fastboot
ckpv5 said:
When on bootloader/fastboot mode, type
fastboot devices
to check connection
if it returns your device serial no, then it is good for you to
fastboot flash boot boot.img
adb devices is working when in recovery or on running OS, not on bootloader/fastboot
Click to expand...
Click to collapse
Tried both ways again but no reaction wth a list of devices. It's blank...
install htc drivers http://www.mediafire.com/?eqrqb44r3ot18g1
SÜPERUSER said:
install htc drivers http://www.mediafire.com/?eqrqb44r3ot18g1
Click to expand...
Click to collapse
Any options on how to install the drivers different from normally? Apparently the drivers won't install as it should install...
Have HTC sync on my system, can i use some of those exe's in there?
This is wat happens with HTC installer.
go_insane1981 said:
This is wat happens with HTC installer.
Click to expand...
Click to collapse
You have a newer sets of drivers installed and the installer exits instead of downgrade the version.
Are you sure you are in fastboot mode?
To enter this.
Power off your phone.
Hold Power and volume down button until phone enters a white screen with Hboot written on it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now press power button again. The screen should now change to this
Showing fastboot marked in red.
Go to device manager and look for the driver. It should look like this ( Android USB Devices, My HTC)
In cmd type fastboot devices.
My cmd returns this.
Cant seem to get the drivers in my device manager, they are installed but not showing in my device manager...
SÜPERUSER said:
You have a newer sets of drivers installed and the installer exits instead of downgrade the version.
Are you sure you are in fastboot mode?
To enter this.
Power off your phone.
Hold Power and volume down button until phone enters a white screen with Hboot written on it.
Now press power button again. The screen should now change to this
Showing fastboot marked in red.
Go to device manager and look for the driver. It should look like this ( Android USB Devices, My HTC)
In cmd type fastboot devices.
My cmd returns this.
Click to expand...
Click to collapse
Ok i used a old htc and now it sees my device again.
Device manager sees the HOX now too.
go_insane1981 said:
Device manager sees the HOX now too.
Click to expand...
Click to collapse
It was my thought at first. So now we know that htc apparently dropped the support for one x and older devices in their driver pack. Good to know
Now i need to take a look at how i can push a diff rom in there since the other rom apparently wont work..
go_insane1981 said:
Now i need to take a look at how i can push a diff rom in there since the other rom apparently wont work..
Click to expand...
Click to collapse
What rom are you trying to install?
SÜPERUSER said:
What rom are you trying to install?
Click to expand...
Click to collapse
http://forum.xda-developers.com/htc-one-x/development/rom-cyanogenmod-12-1-t3396521
go_insane1981 said:
http://forum.xda-developers.com/htc-one-x/development/rom-cyanogenmod-12-1-t3396521
Click to expand...
Click to collapse
Have you flashed this "new storage layout"?
http://forum.xda-developers.com/htc-one-x/orig-development/storage-layout-hox-endeavoru-t3022358
SÜPERUSER said:
Have you flashed this "new storage layout"?
http://forum.xda-developers.com/htc-one-x/orig-development/storage-layout-hox-endeavoru-t3022358
Click to expand...
Click to collapse
Making a new layout is something i missed, Mone said ;
Flashing instruction like usual: perform a full wipe with TWRP for new layout, flash the ROM, flash the suggested GApps, reboot into fastboot mode, flash the boot.img exctracted from the ROM.zip, reboot into system, enjoy cm-12.1.
So i wiped the damn thing( ) after making a backup offcourse(which btw doesn't help cuz its screwed...). But i completely missed that i had to make a new layout... But stil i am convinced it can be "unbricked" one way or another.
I basicly follwed all the steps mentioned in this thread; http://forum.xda-developers.com/showthread.php?t=2069904 and it al worked up to the point i flashed the wrong kernel. After that i searched the forum for hours and found some things which could be connected but with a total different view of what my problem is/was(partially solved with your help) and ended up with putting a SOS sign up for help.

Question Qualcomm CrashDump Mode

Hi everyone,
I didn't do anything special to my phone, no messing with it from system point of veiw.
Yet yesterday it just bricked.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am on latest OxygenOS version that is the only thing that I can say right now :/
One thing -> It is detectable by PC when switched on into that mode or into Recovery mode.
Did anyone here had similar issue? Or maybe you know what at least I should try on my own?
I contacted Oneplus Support already, but it is weekend and I just stuck without phone...
Cheers!
Device Model?
LE2123
hold volume up/down and power. It should reboot
Thanks,
I tried that but nothing changed.
I tried to reboot also from recovery mode but the same result.
Message oneplus for a remote session they fixed mine
Thanks
Did ask for it already, just hoped that there is some other DIY solution
But seems that I need to wait for that session
awsan said:
Message oneplus for a remote session they fixed mine
Click to expand...
Click to collapse
Did you save the msm tool? Do you still have the download link? Can you pm them to me?
NVM thought you were OP haha
Did you try keep holding the Power button for approximately 10 seconds, the phone should shutdown. and when completely off, just press Power + Vol Up + Vol Down to boot into fastboot mode. To boot normally just select Start by pressing the power button.
rgadge said:
Did you try keep holding the Power button for approximately 10 seconds, the phone should shutdown. and when completely off, just press Power + Vol Up + Vol Down to boot into fastboot mode. To normally y just select Start by pressing the power button.
Click to expand...
Click to collapse
Thanks,
I tried that, the same result, CrashDump Mode without info of an error as on my picture from first post.
weapecet said:
Thanks,
I tried that, the same result, CrashDump Mode without info of an error as on my picture from first post.
Click to expand...
Click to collapse
In my previous OnePlus devices, whenever this has happened, I was always able to get out by simply pressing Power +Vol Up+Vol Down all three buttons together to reboot into fastboot, try this combinations as well.
rgadge said:
In my previous OnePlus devices, whenever this has happened, I was always able to get out by simply pressing Power +Vol Up+Vol Down all three buttons together to reboot into fastboot, try this combinations as well.
Click to expand...
Click to collapse
Yep,
Did that once on my OP5T and then it worked, but here no option from fastboot works, neither recovery mode, start or restart bootloader. :/
Can you get to fastbootd? From the bootloader screen type
Code:
fastboot reboot fastboot
craznazn said:
Can you get to fastbootd? From the bootloader screen type
Code:
fastboot reboot fastboot
Click to expand...
Click to collapse
I cannot type or do anything more than select between Start, Restart bootloader, Recovery mode, barcode or power off.
weapecet said:
I cannot type or do anything more than select between Start, Restart bootloader, Recovery mode, barcode or power off.
View attachment 5283239
Click to expand...
Click to collapse
Plug it into your computer, make sure latest platform tools and fastboot drivers are installed, run
Code:
fastboot devices
Does your device show up?
Just use the MSM tool, or request a remote repair session with oneplus.
MSM tool for LE2125 - 11.2.2.2.LE15AA
User Type of Others for login MSM Tool for LE2125 - 11.2.2.2.LE15AA Drivers Mirrors: (provided by @djsubterrain) MSM Tool : https://sourceforge.net/projects/djsubterrain/files/OnePlus 9 Pro/OP9P_MSM_Tool.zip/download MD5 ...
forum.xda-developers.com
Konfuzion said:
Just use the MSM tool, or request a remote repair session with oneplus.
MSM tool for LE2125 - 11.2.2.2.LE15AA
User Type of Others for login MSM Tool for LE2125 - 11.2.2.2.LE15AA Drivers Mirrors: (provided by @djsubterrain) MSM Tool : https://sourceforge.net/projects/djsubterrain/files/OnePlus 9 Pro/OP9P_MSM_Tool.zip/download MD5 ...
forum.xda-developers.com
Click to expand...
Click to collapse
Doesn't apply to his LE2123, that's why I asked for his model to begin
I have fixed my past devices from this issues by following these steps:
1. Download latest firmware from OnePlus (Official Site or XDA Links)
2. Extract the downloaded file and there will be "payload.bin" file that you need to extract by using a payload dumper (you may try this link or this one)
3. Once you have all the images (img ) files to flash the phone you can use this guide for flashing.
Disclaimer:: If you have not done something similar or not sure what this is and not comfortable with this, please avoid following this guide.
All the best!
Hi,
craznazn said:
Plug it into your computer, make sure latest platform tools and fastboot drivers are installed, run
Code:
fastboot devices
Does your device show up?
Click to expand...
Click to collapse
Nope, didn't showed up.
I've got my remote session to learn that they cannot help, device need to be send to repair.
2/10, since Remote session technician didn't even knew my problem, when I stated to him that I cannot do his instructions because of my error then he realized that they cannot help me like that.

Question Can not boot any more

Hello comunity,
I installed TWRP on my Galaxy A72 to install Magisk but now I cant Boot any more. Please help my.
I hope you can help me. Moritz
Did you follow all the steps on the XDA thread?
If yes, it could be possible that you additionally need to flash services disabler
Moritz_pro said:
Hello comunity,
I installed TWRP on my Galaxy A72 to install Magisk but now I cant Boot any more. Please help my.
I hope you can help me. Moritz
Click to expand...
Click to collapse
Probably you flashed TWRP image at "fastboot boot TWRPLOL.img" this happens it . now do this,fastboot flash recovery YourTWRP.img then type fastboot reboot then Get your orginal boot.IMG from your Phone version's firmare folder by 7zip or winrar. then do fastboot flash boot boot.img then type fastboot reboot
hey Idk Who can help me for SPOOF(Change by random TEXT) Any android 5.1 to Android8's BASEBRAND Version and KERNEL Version ? How I can change it ? Phone ROOTED and XPosed module ready(not Virtual xposed) ? Please find it or Create new Xposed APK or SUPERuser(ROOT right) APK for Change BASEBRAND and Kernel Version,You know it writes under settings/about phone,Everything changing exclude these.Please Helpme,or if i can do this manually from which file /system or where ?
ineedstoplaggerwatchers said:
Probably you flashed TWRP image at "fastboot boot TWRPLOL.img" this happens it . now do this,fastboot flash recovery YourTWRP.img then type fastboot reboot then Get your orginal boot.IMG from your Phone version's firmare folder by 7zip or winrar. then do fastboot flash boot boot.img then type fastboot reboot
Click to expand...
Click to collapse
I'm not sure if I am understanding all what you are saying right, so please tell me more detailed so I dont't make it worse.
turn of ur phone by holding power button 15 second then wait and be sure phone will not try reboot,then
Press and hold the Power, Volume Down and Home buttons for seconds;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then the device will be the fastboot mode.
get this file then open it (Try open it by 7zip or winrar then extract it there),then click startCMD then type fastboot commands that i talked about it. but first type "fastboot devices" for be sure if it see your fastboot mode phone....... download this https://dl.twrp.me/a72q/twrp-3.6.2_11-1-a72q.img then rename it recovery(Right click on file then click properties and be sure if it says type of file: img file , so fullfile name must be recovery.img then put it into Adb&FastbootCommnderPrayForMe folder then enter this command "fastboot flash recovery recovery.img" then type fastboot reboot then remove cable quick,try power on ur phone, if it still stuck on boot then Poweroff by holding power button 15 second then 2 second later press power button by Volume Up Button together after 3 second later unpress power then continue holding volume up button,If twrp menu opened,swipe right adn go Wipe menu and ONLY chose Clear Cache , then restart phone . if still stuck then go Adb&FastbootCommnderPrayForMe folder and copy recovery.img file to same place and rename it boot(full file name must be boot.img), then go open command then type "fastboot flash boot boot.img" after enter it,Then type fastboot reboot and enter it. if still do same . then Find ur firmware's actual boot.img from your phone device model's firmare version File(firmware versions around 2GB to 10GB)'s boot.img . u can find it in internet too.Hope all works and i will be happy for u too
when I type Fastboot devices my Phone is not regionized what should I do?

			
				
Normally PC does not find your device as MTP device while you Hold POWER+home+volumeDown button(I mean fastboot mode without phone bootup).Coz it Shows device as MTP device after Phone bootedup(online).Maybe you tried install its driver as MTP by chosing manual install ? first download and install real usb driver(Adb&fastboot driver) of your samsung phone. https://developer.samsung.com/android-usb-driver then install it. then replug ur phone. Then go Device Manager of your PC,then replug your usb cable,and if you see New Device found like "unknow device or fastboot" then click them then click Properties on it, then click Update driver then click browse for Driver then click Let me pick from list then UNCHECK(unclick) "Show compatible hardware" then find your SAMSUNG ADB driver(if u cant see then click PORTS maybe it installed under Ports drivers) then click next to update it as Fastboot driver . but You can change your PC language to English for See same words in your Pc menus for I help you better coz im not German . but if already your secreen opens ? then you need go phone Settings / about phone/ Tap your phone Firm version 10 times and enable developer menu then enable USB ADB debug for install adb driver easily.if your phone screen not showing anything on screen . then you must just do fastboot mode by fastboot mode keys for install fastboot(samsung android usb driver or ADB driver another name)
When I am in the recovery mode then I see the MTP Window. When I am in the Download Mode I see the other window. I don't now waht the fastboot mode is.
Moritz_pro said:
When I am in the recovery mode then I see the MTP Window. When I am in the Download Mode I see the other window. I don't now waht the fastboot mode is.
Click to expand...
Click to collapse
Ignore what the other guy said above, fastboot is not a thing on Samsung phones. You can make it work with some patches however, but by default there is no fastboot.
ok can you tell me in detail so what do you think is the problem and wehre can I find these patches
Simon1511 said:
Did you follow all the steps on the XDA thread?
If yes, it could be possible that you additionally need to flash services disabler
Click to expand...
Click to collapse
There should be no issues if properly following the XDA thread's instructions.
Moritz_pro said:
ok can you tell me in detail so what do you think is the problem and wehre can I find these patches
Click to expand...
Click to collapse
Thank you for remaining me this option I forgot about it, but I installed a custom Rom, but I'd like to run again on the original software can I install it again. If not, it doesn't matter, but it would be better.
The Rom won't start, the start sign appears but doesn't finish loading.
[ROM][12.1][ENCRYPTION][EOL] LineageOS 19.1 for A52 4G and A72
LineageOS is a free, community built, aftermarket firmware distribution of Android 12.1/12L, which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with...
forum.xda-developers.com

Categories

Resources