Develop Bugs

LG G3 stuck in fastboot. HELP URGENT

Hello everyone! I have a big problem on my LG G3 D855.
I was updating my device for android L (5.0 20e) when I was updating the power went out in my house, and the computer and the phone is turned off, and since then, nothing happens to my G3 D855.
Now my device does not turn over, only appears the logo of LG and then gets a white letters with the following wording:
[510] fastboot mode started
[600] - reset -
[860] fastboot: processing comands
need some help, my device is new, has only 1 week of use, and I made that big bull****! Help me please. I'm desperate.
My device, the computer is recognized as:
ADB interface - Fastboot interface (USB Google ID)
Sorry for my bad english, I'm using Google translator!

http://forum.xda-developers.com/showthread.php?t=2785089

tarroyo said:
http://forum.xda-developers.com/showthread.php?t=2785089
Click to expand...
Click to collapse
does not work , as I already said , my device is stuck in fastboot mode, does not go into download mode

My pc hang while I was flashing a stock rom via LG Flashtool... everything was gone in the phone exept "Firmware Update/download mode". No matter which buttons I press during boot (up/down volume, power etc.) I was returned into this! I struggled with flashing using LG Flashtool with no sucess... somtimes I got error and it didn't even start, and sometimes it did start "flashing" but went VERY slow in the % and before it got anywhere near 100%, I got error and the process was aborted. I finally found info about Win8.1 beeing the source of the flashing problems and downgraded to Win7 and woah, flashing now went with speed and was sucessful. For a while there I totally thought my phone was dead...
Ehm... so you only get these white fastboot letters? Strange, you might be even deeper into the **** that I was xD
But I guess if fastboot work you could try to flash the needed files with fastboot flash commands... look here: http://forum.xda-developers.com/showpost.php?p=57296088&postcount=573
This was the only window I could get to when my phone was "half-dead":
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

schoolsux said:
My pc hang while I was flashing a stock rom via LG Flashtool... everything was gone in the phone exept "Firmware Update/download mode". No matter which buttons I press during boot (up/down volume, power etc.) I was returned into this! I struggled with flashing using LG Flashtool with no sucess... somtimes I got error and it didn't even start, and sometimes it did start "flashing" but went VERY slow in the % and before it got anywhere near 100%, I got error and the process was aborted. I finally found info about Win8.1 beeing the source of the flashing problems and downgraded to Win7 and woah, flashing now went with speed and was sucessful. For a while there I totally thought my phone was dead...
Ehm... so you only get these white fastboot letters? Strange, you might be even deeper into the **** that I was xD
But I guess if fastboot work you could try to flash the needed files with fastboot flash commands... look here: http://forum.xda-developers.com/showpost.php?p=57296088&postcount=573
This was the only window I could get to when my phone was "half-dead":
Click to expand...
Click to collapse
I wonder what the fastboot commands to play the laf.img and boot.img into the device

PabloHenrick said:
I wonder what the fastboot commands to play the laf.img and boot.img into the device
Click to expand...
Click to collapse
You can simply "fastboot boot iaf.img", then reflash .kdz with flashtool.

YaDr said:
You can simply "fastboot boot iaf.img", then reflash .kdz with flashtool.
Click to expand...
Click to collapse
Device NOT leaves the fastboot screen , and NOR goes into download mode , how do I '' Simply flash " fastboot boot iaf.img " then reflash .kdz with FlashTool .

PabloHenrick said:
Device NOT leaves the fastboot screen , and NOR goes into download mode , how do I '' Simply flash " fastboot boot iaf.img " then reflash .kdz with FlashTool .
Click to expand...
Click to collapse
Ummm.. You download iaf.img (There was a complete partition dump of G3 on this forum, use search) or extract it from .KDZ (tons of guides on that), you install adb (again, tons of guides and simple installers), you install LG drivers (and again, it's been discussed like million times over, just search for it...), you issue a "adb fastboot boot iaf.img" command from terminal. That's all, really. Then your phone goes into download mode, and you reflash stock .kdz from there.

YaDr said:
Ummm.. You download iaf.img (There was a complete partition dump of G3 on this forum, use search) or extract it from .KDZ (tons of guides on that), you install adb (again, tons of guides and simple installers), you install LG drivers (and again, it's been discussed like million times over, just search for it...), you issue a "adb fastboot boot iaf.img" command from terminal. That's all, really. Then your phone goes into download mode, and you reflash stock .kdz from there.
Click to expand...
Click to collapse
need to download the LAF.img or iaf.img and also the boot.img. I can not find! the one who found it, have a password, and I can not use the password they gave me, which is the LGViet.com always gives wrong password. you could make that up for me?
HAHAHA, Happy New Year!

Fastbooting android whose recovery is not opening.

While trying to root my redmi 1s, i accidentally pressed a wrong button due to which it seemed like if recovery is no longer functioning.
The mobile is getting struck at mi logo and is not proceeding forward.
Pressing volume down+power button successfully opens fastboot screen. Earlier when I was connecting it to mi suite on pc, i was able to flash. But due to incomplete charged battery, flashing procedure stopped. After the recent windows update, mi pc suite is recognizing the android but is not able to flash it. It pops out a dialogue box saying "cant flash the device". Any idea what can i do now?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

akshat2119 said:
While trying to root my redmi 1s, i accidentally pressed a wrong button due to which it seemed like if recovery is no longer functioning.
The mobile is getting struck at mi logo and is not proceeding forward.
Pressing volume down+power button successfully opens fastboot screen. Earlier when I was connecting it to mi suite on pc, i was able to flash. But due to incomplete charged battery, flashing procedure stopped. After the recent windows update, mi pc suite is recognizing the android but is not able to flash it. It pops out a dialogue box saying "cant flash the device". Any idea what can i do now?
Click to expand...
Click to collapse
If your phone boots into fastboot, then try installing twrp recovery and then flash the rom you wish.

vicky romero said:
If your phone boots into fastboot, then try installing twrp recovery and then flash the rom you wish.
Click to expand...
Click to collapse
but how to flash twrp via fastboot. i.e. which software would recognize fastbooting android?

akshat2119 said:
but how to flash twrp via fastboot. i.e. which software would recognize fastbooting android?
Click to expand...
Click to collapse
Flashing twrp is done by fastboot using adb tools. First install the USB drivers of your phone. You can simply google them. Then go to this link https://drive.google.com/open?id=0B_43Fi9T_yqvUy1jOWk0cnJyZEk
and download the four files in the adb folder. Now download the latest twrp image i.e, twrp 3.0.0-0 from this link
https://dl.twrp.me/armani/
keep the adb tools i.e, the four files you had downloaded and the twrp image in the same folder. Rename the twrp 3.0.0-0 to recovery.img. Now hold shift key and press right click on your mouse. From there select open command window here. Now open fastboot and connect your phone through Usb and type this code
Code:
fastboot devices
This is to check wheather your device is connected or not. If it's connected then it will show some code. After that type this code
Code:
fastboot flash recovery recovery.img
That's it twrp will be flashed right away. Then you can flash MIUI or any other custom rom.

Thank you
vicky romero said:
Flashing twrp is done by fastboot using adb tools. First install the USB drivers of your phone. You can simply google them. Then go to this link https://drive.google.com/open?id=0B_43Fi9T_yqvUy1jOWk0cnJyZEk
and download the four files in the adb folder. Now download the latest twrp image i.e, twrp 3.0.0-0 from this link
https://dl.twrp.me/armani/
keep the adb tools i.e, the four files you had downloaded and the twrp image in the same folder. Rename the twrp 3.0.0-0 to recovery.img. Now hold shift key and press right click on your mouse. From there select open command window here. Now open fastboot and connect your phone through Usb and type this code
Code:
fastboot devices
This is to check wheather your device is connected or not. If it's connected then it will show some code. After that type this code
Code:
fastboot flash recovery recovery.img
That's it twrp will be flashed right away. Then you can flash MIUI or any other custom rom.
Click to expand...
Click to collapse
A big thank you. I owe you for helping out. By the way after installing recovery I tried downloading rom(both armani which was earlier working and miui official). The script gets sideloaded successfully but again the operating system is not loading. ie mobile is still struck in bootloader

akshat2119 said:
A big thank you. I owe you for helping out. By the way after installing recovery I tried downloading rom(both armani which was earlier working and miui official). The script gets sideloaded successfully but again the operating system is not loading. ie mobile is still struck in bootloader
Click to expand...
Click to collapse
Flash this firmware before installing the rom. It'll fix the bootloops.
https://www.androidfilehost.com/?fid=24052804347850305
Thanks @fefifofum for this flashable zip.

Any way to enter EDL mode without disassembling the phone?

Vol up/down + USB cable doesn't work, and I read one post that says the deep flash cable doesn't work either. Bootloader is locked.
I have the full body ceramic version, so there aren't any disassembly directions available so I could take it apart and ground the EDL points...
Current ROM is just boot looping, wiping data doesn't help, and only ROM I seem to be able to flash is the same one (latest global beta).... Just want to downgrade back to global stable.
Any info would be greatly appreciated!

Can't you boot to fastboot? What's the error when you attempt to flash anything else? Can you access TWRP?

I have done it a few times, there is some key combination I used but can't remember what it was

Benjimaestro said:
Can't you boot to fastboot? What's the error when you attempt to flash anything else? Can you access TWRP?
Click to expand...
Click to collapse
Edit: okay... yes, I got it into fastboot mode now. Don't know what I struggled with that key combo so much.
What can I actually do from here to reflash, since bootloader is locked?

phzi said:
Edit: okay... yes, I got it into fastboot mode now. Don't know what I struggled with that key combo so much.
Click to expand...
Click to collapse
Just flash MIUI from there then, it should work provided that you unlocked the bootloader.

Benjimaestro said:
Just flash MIUI from there then, it should work provided that you unlocked the bootloader.
Click to expand...
Click to collapse
phzi said:
bootloader is locked
Click to expand...
Click to collapse
This would be easy if bootloader wasn't locked, I know.

Should be able to use MiFlash tool? And download a fastboot flash rom from xiaomi website

phzi said:
This would be easy if bootloader wasn't locked, I know.
Click to expand...
Click to collapse
Did you try xiaomitool already? http://www.xiaomitool.com/

CrazyBeaver2377 said:
Did you try xiaomitool already? http://www.xiaomitool.com/
Click to expand...
Click to collapse
Yes. When you start it from recovery, it says it needs ADB, and reboots the phone to OS (which bootloops - no way to activate ADB in OS).
Edit: Same with starting XiaomiTool when in FastBoot - it needs ADB enabled from the OS....

Hello, hello! Here's the link how to disassemble mix2:
1obzor.com/news/razborka-xiaomi-mi-mix-2.html
after opening here is the instruction on how to enter EDL mode:
en.miui.com/thread-1351514-1-1.html
links without the htts: // prefix
since I'm a new member

This was happened to my xiaomi Max.
i tried using fastboot to boot into EDL, it didnt work.
using fastboot-edl -> reboot.bat, it show success message but actually my phone only restarted and stuck in "Mi" Logo.
what i did to boot into EDL are :
- While phone still connected to pc and phone in fastboot mode i try to hold the power button
- After the screen blinked (it restarted), i pressed both vol + and vol - and after i hear a plug in sound in my PC Windows i release the power button
- Then the screen will stay Blank (With background light) but after i refresh MiFlash application, it will detected as COM20 or something.
- Then i do flashing and it works!
Hope it will help to solve your problem

To enter EDL on mix 2 without disassembling. Boot the phone into bootloader then you type "fastboot oem edl" on your computer then you can flash the phone normally with mi flash tool. Hope this suggestion can help!

the miui version cant be installed on this device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am an idiot i have self inflicted this issue. I flashed from 8.11.8 to 10.0.0.1 i mistake clicked flash and lock.bat now the device is locked and will not boot. Got deep flash cable but not able to switch off the device to get into 9008 mode. please someone direct me. I am getting frustrated and loosing hope. Cannot boot into edl as bootloader locked. cannot recovery as I have no twrp. cannot unlock as device is not bound to account. cannot debug mode as device will not boot to OS. I have truly made my life complicated not purposely. cannot shutdown the device to get into Deep flash mode
Thank you people, apologies for wasting your time.

Same situation.. still trying to find a way to get out of this. But i can help you somehow as i figured out how u can switch off the phone.
1. Copy and rename any file to twrp.img and save it in a folder
2. Open cmd and change directory to where u saved the twrp.img file
3.Just boot into fastboot and type this command
fastboot boot twrp.img
It will try to push this to your phone ane eventually fail. You will get a message on your phone saying "system destroyed and press power button to switch off"
Thats how i switch it off each time lol

emiratiprince said:
Same situation.. still trying to find a way to get out of this. But i can help you somehow as i figured out how u can switch off the phone.
1. Copy and rename any file to twrp.img and save it in a folder
2. Open cmd and change directory to where u saved the twrp.img file
3.Just boot into fastboot and type this command
fastboot boot twrp.img
It will try to push this to your phone ane eventually fail. You will get a message on your phone saying "system destroyed and press power button to switch off"
Thats how i switch it off each time lol
Click to expand...
Click to collapse
getting this thing into EDL mode seems impossible now as it just reboots
my issue is i flashed global over chinese device and accidentally locked bootloader and also had signed out my mi account. i dont wanna take off the back off this thing but button combo for EDL not working at all

shingers5 said:
getting this thing into EDL mode seems impossible now as it just reboots
my issue is i flashed global over chinese device and accidentally locked bootloader and also had signed out my mi account. i dont wanna take off the back off this thing but button combo for EDL not working at all
Click to expand...
Click to collapse
Same here but intentionally lock it for resale purposes. Did not know it would brick. But the trick to switch it off still work.
Btw, Me too i don't want to open the back cover but it seems the only solution. I have already ordered my prying tools.
---------- Post added at 04:24 AM ---------- Previous post was at 04:09 AM ----------
Apparently there's a work around for not opening the phone..Try this https://youtu.be/2xYBEg-AXjc
Hychess pmed me this link

emiratiprince said:
Same here but intentionally lock it for resale purposes. Did not know it would brick. But the trick to switch it off still work.
Btw, Me too i don't want to open the back cover but it seems the only solution. I have already ordered my prying tools.
---------- Post added at 04:24 AM ---------- Previous post was at 04:09 AM ----------
Apparently there's a work around for not opening the phone..Try this https://youtu.be/2xYBEg-AXjc
Hychess pmed me this link
Click to expand...
Click to collapse
https://unbrick.ru/
thats who helped me and it was quick and painless. you do have to take the back cover off and the silver plate. touch the 2 bottom pins, first 2 on bottom row and plug in usb cable. phone has to be off. just unplug the battery and back in. phone is back but now have to wait 360 hours to unlock bootloader. oh well

Question Qualcomm CrashDump Mode

Hi everyone,
I didn't do anything special to my phone, no messing with it from system point of veiw.
Yet yesterday it just bricked.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am on latest OxygenOS version that is the only thing that I can say right now :/
One thing -> It is detectable by PC when switched on into that mode or into Recovery mode.
Did anyone here had similar issue? Or maybe you know what at least I should try on my own?
I contacted Oneplus Support already, but it is weekend and I just stuck without phone...
Cheers!

Device Model?

LE2123

hold volume up/down and power. It should reboot

Thanks,
I tried that but nothing changed.
I tried to reboot also from recovery mode but the same result.

Message oneplus for a remote session they fixed mine

Thanks
Did ask for it already, just hoped that there is some other DIY solution
But seems that I need to wait for that session

awsan said:
Message oneplus for a remote session they fixed mine
Click to expand...
Click to collapse
Did you save the msm tool? Do you still have the download link? Can you pm them to me?
NVM thought you were OP haha

Did you try keep holding the Power button for approximately 10 seconds, the phone should shutdown. and when completely off, just press Power + Vol Up + Vol Down to boot into fastboot mode. To boot normally just select Start by pressing the power button.

rgadge said:
Did you try keep holding the Power button for approximately 10 seconds, the phone should shutdown. and when completely off, just press Power + Vol Up + Vol Down to boot into fastboot mode. To normally y just select Start by pressing the power button.
Click to expand...
Click to collapse
Thanks,
I tried that, the same result, CrashDump Mode without info of an error as on my picture from first post.

weapecet said:
Thanks,
I tried that, the same result, CrashDump Mode without info of an error as on my picture from first post.
Click to expand...
Click to collapse
In my previous OnePlus devices, whenever this has happened, I was always able to get out by simply pressing Power +Vol Up+Vol Down all three buttons together to reboot into fastboot, try this combinations as well.

rgadge said:
In my previous OnePlus devices, whenever this has happened, I was always able to get out by simply pressing Power +Vol Up+Vol Down all three buttons together to reboot into fastboot, try this combinations as well.
Click to expand...
Click to collapse
Yep,
Did that once on my OP5T and then it worked, but here no option from fastboot works, neither recovery mode, start or restart bootloader. :/

Can you get to fastbootd? From the bootloader screen type
Code:
fastboot reboot fastboot

craznazn said:
Can you get to fastbootd? From the bootloader screen type
Code:
fastboot reboot fastboot
Click to expand...
Click to collapse
I cannot type or do anything more than select between Start, Restart bootloader, Recovery mode, barcode or power off.

weapecet said:
I cannot type or do anything more than select between Start, Restart bootloader, Recovery mode, barcode or power off.
View attachment 5283239
Click to expand...
Click to collapse
Plug it into your computer, make sure latest platform tools and fastboot drivers are installed, run
Code:
fastboot devices
Does your device show up?

Just use the MSM tool, or request a remote repair session with oneplus.
MSM tool for LE2125 - 11.2.2.2.LE15AA
User Type of Others for login MSM Tool for LE2125 - 11.2.2.2.LE15AA Drivers Mirrors: (provided by @djsubterrain) MSM Tool : https://sourceforge.net/projects/djsubterrain/files/OnePlus 9 Pro/OP9P_MSM_Tool.zip/download MD5 ...
forum.xda-developers.com

Konfuzion said:
Just use the MSM tool, or request a remote repair session with oneplus.
MSM tool for LE2125 - 11.2.2.2.LE15AA
User Type of Others for login MSM Tool for LE2125 - 11.2.2.2.LE15AA Drivers Mirrors: (provided by @djsubterrain) MSM Tool : https://sourceforge.net/projects/djsubterrain/files/OnePlus 9 Pro/OP9P_MSM_Tool.zip/download MD5 ...
forum.xda-developers.com
Click to expand...
Click to collapse
Doesn't apply to his LE2123, that's why I asked for his model to begin

I have fixed my past devices from this issues by following these steps:
1. Download latest firmware from OnePlus (Official Site or XDA Links)
2. Extract the downloaded file and there will be "payload.bin" file that you need to extract by using a payload dumper (you may try this link or this one)
3. Once you have all the images (img ) files to flash the phone you can use this guide for flashing.
Disclaimer:: If you have not done something similar or not sure what this is and not comfortable with this, please avoid following this guide.
All the best!

Hi,
craznazn said:
Plug it into your computer, make sure latest platform tools and fastboot drivers are installed, run
Code:
fastboot devices
Does your device show up?
Click to expand...
Click to collapse
Nope, didn't showed up.
I've got my remote session to learn that they cannot help, device need to be send to repair.
2/10, since Remote session technician didn't even knew my problem, when I stated to him that I cannot do his instructions because of my error then he realized that they cannot help me like that.

Help "failed to write partition" error Redmi 5A (riva)

I had installed in this phone a custom rom a few months back for my friend. Yesterday he told me that the device froze when he was browsing the phone gallery app, and a few minutes later the phone rebooted and couldn't pass the mi logo (so the system wasn't loading I guessed, because the logo of the ROM wasn't showing). I tried to enter TWRP, but even there the phone would get stuck on the TWRP splash page and rebooted back to the MI logo. So I tried to reinstall TWRP (I have still access to fastboot mode) and, after, a newer version, but the problem was the same. I tried booting a recovery image without installing it (fastboot boot twrp.img) and the problem was similar, but instead of rebooting to the MI logo, the phone would get stuck on the TWRP logo. I tried with OrangeFox recovery too, but same problem. I read in another post that it may be a problem with the /data partition, so I (fastboot erase userdata) and tried again the above recovery installation, but it didn't work. I, then, tried to wipe all partion via fastboot, and tried the command "fastboot erase system -w", but it didn't work either. So I tried the way to restore the phone with MiFlash tool, I found the firmware I needed, I flashed it, and after ~4s it gave me the error "failed to write partiton" (see image).
Spoiler: Image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried with another firmware (this time based on Oreo instead of Nougat), same error. I searched a solution for this error, but I found nothing helpful. Now I have the phone working (=it can power on) and can access to fastboot, but don't know what to do. Can someone out there, with maybe a clearer idea of what's going on, help me? Thanks in advance

Update:
I found out that the problem is flashing this file "gpt_both0.bin" (which is the partition table). Every firmware that I tried failed to flash when trying to fastboot this file. So I tried to remove the line (
Code:
fastboot %* flash partition "%~dp0images\gpt_both0.bin" || @echo "Flash tz error" && exit /B 1
) from the flash_all.bat and everything was flashed without errors, but the phone won't start, so this file is necessary. Flashing it separately gave me the same error (failed to write partition). So, I ask again for help, hoping that someone will come to save me

I have same issue. Did you get any working method?

amitkr.xda said:
I have same issue. Did you get any working method?
Click to expand...
Click to collapse
No, I'm still getting the error and trying to test all that comes to my mind. Maybe one day something will work

TheMagicWafer said:
No, I'm still getting the error and trying to test all that comes to my mind. Maybe one day something will work
Click to expand...
Click to collapse
Does your phone go in fastboot? Mine doesn't, but is recognised as QHSBULK 9008, also it's not recognised in adb devices or mi tool

amitkr.xda said:
Does your phone go in fastboot? Mine doesn't, but is recognised as QHSBULK 9008, also it's not recognised in adb devices or mi tool
Click to expand...
Click to collapse
Yes, my phone goes into fastboot. The name QHSBULK 9008 sounds like the phone goes in edl mode. I'm not sure, but searching around I found out it's the name of the phone when it's recognised as by it's qualcomm drivers, or something similar

TheMagicWafer said:
Yes, my phone goes into fastboot. The name QHSBULK 9008 sounds like the phone goes in edl mode. I'm not sure, but searching around I found out it's the name of the phone when it's recognised as by it's qualcomm drivers, or something similar
Click to expand...
Click to collapse
How can I boot in fastboot? It's not going in fastboot or anything

amitkr.xda said:
How can I boot in fastboot? It's not going in fastboot or anything
Click to expand...
Click to collapse
Only (hardware) method possible is to hold the power button and the volume down(-) button simultaneously and wait for the fastboot screen/logo

TheMagicWafer said:
Only (hardware) method possible is to hold the power button and the volume down(-) button simultaneously and wait for the fastboot screen/logo
Click to expand...
Click to collapse
Nothing works, it's just blank screen, no vibrate, no logo nothing

amitkr.xda said:
Nothing works, it's just blank screen, no vibrate, no logo nothing
Click to expand...
Click to collapse
I'm sorry, but I'm not an expert and I can't help you any further. If one day I find a solution, be sure I'm going to write it here

have u try Miui Nougat Global with clean all and lock option? if yes, looks like your emmc has died

Avisadius said:
have u try Miui Nougat Global with clean all and lock option? if yes, looks like your emmc has died
Click to expand...
Click to collapse
Already tried, and it gave me the same error. I really hope it's not a motherboard issue, because a replacement is not worth it. Thanks anyway