Hi All,
I've done numerous updates on my BA lately, but this last time the update hung during the radio portion. Now, the unit is stuck in it's update mode (You know... blank screen except for saying USB or SERIAL at the top, and a version number atthe bottom), and every time I try to do an update of any kind it hangs giving error number 120 which apparently indicates that I'm attempting to install an update that doesn't match the country (and I assume language) of the unit.
Anyone seen this before? Anyone know how to get around it? I've tried using every update I can find, including those that have installed properly in the past. HELP!!!
Thanks! )
please help, my mda keeps showing this message, the camera doesnt work and the sound doesnt either, ive returned it to htc europe for repair twice, the first time they changed the mainboard, i got it back and it worked for about a minute then when i next tried the camera, the message appeared and the sound went, as in not even a beep when moving the slider, i returned it to them thinking theyd done a cr*p job but they changed the mainboard again blaming that as the problem, i know they are the ones that make it but it seems they dont actually know whats wrong with it, as twice it has worked and the same result, worked for a minute then no sound no camera, its been going back and fourth for over a month, anyone any idea's??? ive tried the obvious, hard resetting, ive not installed any software third party or otherwise.
yikes i need this to work, possible problem with the firmware?
rom version: 1.30.114 wwe
rom date: 04/13/06
radio version: 1.10.03
protocol version: 42.44.p8
extrom version: 1.30.232 wwe
Camera Failed
Dear friend,
J have the same problem. (Failed to initialize camera 36001:100:1)
Did you solved your's problem ?
If you solved please help me !!!
Best regards
Dejan
I bet your speakers don't work either...
Try tapping the phone, I heard that happened after a bad drop...
Just...(as weird as this sounds) keep tapping it...very firmly.
Search around and see some other methods.
my o2 exec having the same problem too. i didnt drop the phone at all..
i m got the latest news from the technician.. he said the connector is broken. so, i think is time to change to new phone.
sound thing happened to me .. i took out the battery blew on it and replaced .. the sound worked :s
as for the camera .. still working on it
Ok
dr_derqami said:
Hi i think i have solved the problem (at least i had the same problem and now my universal is workin)
what i did was so simple 1. downloaded user manual from xda ftp
2. disambled the device according to instructions, i took out the main camera and replaced it back.
3. reinstalled the rom. now its okey just working like before.
(it may be a camera connector issue.)
Click to expand...
Click to collapse
i had this once after installing a new rom, this was easily fixed with a hard reset, and then a new rom install after hard reset , i think it is more a driver issue rather than hardware.
Ok
dr_derqami said:
Before doing this i made lots of hard resets and i used all wm5-6 roms available, anyways: people, before disassembling ur universal make hard reset in case it works )
Click to expand...
Click to collapse
TBH id certainly not recommend anyone disassembling there devices unless they know 100% what they are doing and the device is out of its warrenty.
Ok
I had the same error message.
I am sure it was NOT an hardware issue, because each time I reinstalled the OS (VM5) of my device, the camera was working fine, and won't work after the first reset.
You can see my whole story an a possible workaround here :
http://forum.xda-developers.com/showthread.php?p=1741662#post1741662
Hello,
I need some help with the issue that occurs on N900T. Whenever I try to launch a camera there is just a black screen and then I get an error "Camera Failed". Sometimes it throws another error saying "Server errror occurred. Restart Camera".
This is actually not my phone, my colleague just asked me if I could try to fix it. He wants to buy the phone but not if the camera is not working. The guy my colleague wants to buy the phone from claims that the camera was working fine and it broked after he had updated the phone to the latest version - N900TUVUFOB6.
I have tried to flash some other custom roms, did factory reset many times, also found a thread advising to flash non-hlos file but all to no avail. Now I am back on stock N900TUVUFOB6 rom and still not working. Anyone has any other ideas? Based on what the owner of the phone says, it should not be a hardware fault as it was working prior to software upgrade (or he just lies ).
Hi to all ,
New to this forum and need help with my first Android 4.4.4 head unit, I have little to none knowledge
Was driving using Sygic navigation, suddenly navigation froze, then unit reboots into recovery mode by itself, I clicked reboot now and it worked fine, until I tried to listen to radio ao know that steering wheel button are not working, contacted the seller and he sent me an MCU file in rar, I did an updated and everything went wrong saying error ...update failed I think he sent wrong MCU and all the buttons are not working or assigned wrongly,radio not working too . I tried several MCUs found it here but none update my unit always saying update failed
Thank you
MCU version
MTCB-KSP-V2.85
Android 4.4.4 / 1024x600 / quad core
AJBRAVO1 said:
MCU version
MTCB-KSP-V2.85
Click to expand...
Click to collapse
Did you already tested all the 3 KSP MCUs listed here?
http://forum.xda-developers.com/showthread.php?t=3246386
MCU Version
Yes,
I Did try all three but still getting the same result ,,,,error update failed ... called the seller and he sent MCU,RAR and it did not work too.
Thank you
I tried all three KSPs again with no luck but did notice this MCU version changed from original KSP-2.85 to KSP-2.79 the 2.79 was from the site but I didn't see any update taking effect...... still buttons act differently home button will turn off , GPS button will mute un mute , no radio , factory setting key changed and I don't know the new one ,power button will not turn off unit.
Many thanks to anyone trying to help
AJBRAVO1 said:
I tried several MCUs found it here but none update my unit always saying update failed
Click to expand...
Click to collapse
About what you said there, did you also try non-KSP MCUs in the past?
MCU Version
No
I did not try non KSP.
If no other KSP MCUs are available on the net, AFAIK then the last chance left is to request again the correct MCU and ROM files from your seller/manufacturer.
MCU Version
Hi,
I did asked the manufacturer for original MCU and ROM files , hope this will fix it.
Thank you
Got new ROM files and MCU and its working well except no steering wheel control , controls will work for some time then will not, I mean I was able to assign steering wheel control after the updated but lost after few days, tried to re assigned but it didn't work will not take effect . MCU provided by the manufacturer different from the original one that came with the unit it went from KSP v2.85 to KLD6 v2.85 but its working now except steering wheel control.
Thank you all for trying to help
I'm no expert and I can't solve your problem but going from one manufacturers MCU to anothers goes against everything I've read on this forum.
Sent from my SM-G920F using Tapatalk
Can someone help me please?
My cell phone does not sound or even in the microphone.
Microphone is muted.
I plugged in my JBL Bluetooth headset, and it was also without audio and microphone. I restarted the phone, with the JBL turned on via Bluetooth, the phone's sound came back, but the microphone didn't.
If I restart again, without JBL connected via bluetooth, the problem of no audio comes back, and the microphone is not sounding.
I think the problem has to do with software, not hardware.
In view, I often restart the phone, and sometimes come back.
Just yesterday, I restarted the phone, and out of nowhere, the microphone and the audio came back. It lasted a day, and it got bad again.
The headset by the type C adapter also does not recognize in the phone.
I put the headset on, the headset icon does not appear on the taskbar, let alone sound on the headset or microphone.
Is it a MIUI bug? Should I keep flashing Miui through Xiaomi Flash until the bug goes away?
My current MIUI is Miui Global 10.4.1 (10.4.1.0) PCAMIXM.
Mikado Ryugamine said:
Can someone help me please?
My cell phone does not sound or even in the microphone.
Microphone is muted.
I plugged in my JBL Bluetooth headset, and it was also without audio and microphone. I restarted the phone, with the JBL turned on via Bluetooth, the phone's sound came back, but the microphone didn't.
If I restart again, without JBL connected via bluetooth, the problem of no audio comes back, and the microphone is not sounding.
I think the problem has to do with software, not hardware.
In view, I often restart the phone, and sometimes come back.
Just yesterday, I restarted the phone, and out of nowhere, the microphone and the audio came back. It lasted a day, and it got bad again.
The headset by the type C adapter also does not recognize in the phone.
I put the headset on, the headset icon does not appear on the taskbar, let alone sound on the headset or microphone.
Is it a MIUI bug? Should I keep flashing Miui through Xiaomi Flash until the bug goes away?
My current MIUI is Miui Global 10.4.1 (10.4.1.0) PCAMIXM.
Click to expand...
Click to collapse
Probably a bug with your firmware.
Try to do a clean install of the rom or a factory reset to the phone.
I had a bug with my Wi-Fi with my Mi6 for over a year. Between Global stable, xiaomi eu beta and STABLE, my wifi was always dropping, sometimes more than others. Now it's fix. Probably magic.
I had problems with xiaomi roms that what fixed it was flashing the same zip over and over again until it started working. Not even flashing the phone back to stock fixed it.
Always backup your stuff before doing a factory reset.
Sent from my MI 6 using Tapatalk
XiCO FiR3 said:
Probably a bug with your firmware.
Try to do a clean install of the rom or a factory reset to the phone.
I had a bug with my Wi-Fi with my Mi6 for over a year. Between Global stable, xiaomi eu beta and STABLE, my wifi was always dropping, sometimes more than others. Now it's fix. Probably magic.
I had problems with xiaomi roms that what fixed it was flashing the same zip over and over again until it started working. Not even flashing the phone back to stock fixed it.
Always backup your stuff before doing a factory reset.
Sent from my MI 6 using Tapatalk
Click to expand...
Click to collapse
I just reset it, still nothing, turned the microphone back on once the ROM installation was over, and then the microphone is muted again.
I upgraded from the phone itself, in the system update tab, and located the internal memory.
I don't know if so, the installation is less clean, is it?
For Xiaomi Mi Flash, it only works if Xiaomi has the bootloader unlocked, mine is locked.
To unlock the bootloader, also only if it's in developer ROM, I was in stable.
What do you think?
Now I'm in the developer ROM, better unlock the bootloader, and try to re-rom via Xiaomi Mi Flash or install TWRP, and go there?
Will this make the installation cleaner?
I am still confident that the problem is firmware, not hardware really.
The newest vantom kernel might be the cause?
Shiw Liang said:
The newest vantom kernel might be the cause?
Click to expand...
Click to collapse
I was thinking this, I'll pass this kernel to see what happens:
https://forum.xda-developers.com/mi-6/development/kernel-loveroriented-kernel-t3863778
How did you do ? I'm stuck in the same situation. I have tried to flash stock rom, flash another rom, but still no sound and no microphone
baoprokute1234 said:
How did you do ? I'm stuck in the same situation. I have tried to flash stock rom, flash another rom, but still no sound and no microphone
Click to expand...
Click to collapse
Friend, I couldn't solve it so far. I do not know what else to do!
Already blinked stock rom, both by twrp, both by Xiaomi Flash. I installed Line OS rom, thinking that maybe out of stock could solve, and nothing.
And so far, I don't know if the problem really is software or hardware.
Thinking it was hardware, I bought the charging plate that comes with the microphone capsule days ago, I changed the part, thinking it could be the capsule, but the problem still persists.
baoprokute1234 said:
How did you do ? I'm stuck in the same situation. I have tried to flash stock rom, flash another rom, but still no sound and no microphone
Click to expand...
Click to collapse
How did your problem start?
Do you remember?
My, I do not even remember how it started, I already have this problem, a few months ago.
I tried to contact Xiaomi Global too, to no avail, they only recommended I do, what I had already done, factory reset, and etc ...
baoprokute1234 said:
How did you do ? I'm stuck in the same situation. I have tried to flash stock rom, flash another rom, but still no sound and no microphone
Click to expand...
Click to collapse
It would be nice if someone else, experienced in Xiaomi phones and the firmware / software issues of the phone, could help us.
I don't think people see much of the help tab topics around here.
I'm thinking of sending a private message to members who always post rom's here on XDA.
Can you solve the problems you encountered? I also encountered the same problem as you.
I know this thread is bit old, just to try to give some piece of mind for the ones searching out there (like me)
I have not solved the problem, there is no audio output in anyway, neither the microphone works.
After long time i taken my Xiaomi Mi 6 and flashed Lineage OS on it (lineage-19.1-20221013-nightly-sagit-signed) and using adb logcat to check the logstream from the device, i get the following messages:
11-09 00:04:35.233 28971 29014 E AudioSystem-JNI: AudioSystem::listAudioPorts error -19
11-09 00:04:35.233 28971 29014 W AudioManager: updateAudioPortCache: listAudioPorts failed
11-09 00:04:35.280 1338 2414 E AudioSystem-JNI: Command failed for android_media_AudioSystem_initStreamVolume: -19
11-09 00:04:35.281 1338 2414 E AS.AudioService: Failed to initStreamVolume (1) for stream 11
11-09 00:04:35.281 1338 2414 E AS.AudioService: VSS(): initStreamVolume failed with 1 will retry
Click to expand...
Click to collapse
This lines repeat a lot of times, so I dig into Android Code Search to checkout what is the -19 code. Per def in the source code, -19 is the ENODEV constant, saying "/* No such device */".
As this constant is used everywhere in the source code, I need more time to isolate and found out where this error relates to the Audio System.
I still can't determine if it's a software problem or a reporting from the software that the hardware is faulty. I will update this message as i discover more.
filipe_x3 said:
I know this thread is bit old, just to try to give some piece of mind for the ones searching out there (like me)
I have not solved the problem, there is no audio output in anyway, neither the microphone works.
After long time i taken my Xiaomi Mi 6 and flashed Lineage OS on it (lineage-19.1-20221013-nightly-sagit-signed) and using adb logcat to check the logstream from the device, i get the following messages:
This lines repeat a lot of times, so I dig into Android Code Search to checkout what is the -19 code. Per def in the source code, -19 is the ENODEV constant, saying "/* No such device */".
As this constant is used everywhere in the source code, I need more time to isolate and found out where this error relates to the Audio System.
I still can't determine if it's a software problem or a reporting from the software that the hardware is faulty. I will update this message as i discover more.
Click to expand...
Click to collapse
Have you found anything? I'm having the same problem, is it actually a hardware issue or is it software?