please help, my mda keeps showing this message, the camera doesnt work and the sound doesnt either, ive returned it to htc europe for repair twice, the first time they changed the mainboard, i got it back and it worked for about a minute then when i next tried the camera, the message appeared and the sound went, as in not even a beep when moving the slider, i returned it to them thinking theyd done a cr*p job but they changed the mainboard again blaming that as the problem, i know they are the ones that make it but it seems they dont actually know whats wrong with it, as twice it has worked and the same result, worked for a minute then no sound no camera, its been going back and fourth for over a month, anyone any idea's??? ive tried the obvious, hard resetting, ive not installed any software third party or otherwise.
yikes i need this to work, possible problem with the firmware?
rom version: 1.30.114 wwe
rom date: 04/13/06
radio version: 1.10.03
protocol version: 42.44.p8
extrom version: 1.30.232 wwe
Camera Failed
Dear friend,
J have the same problem. (Failed to initialize camera 36001:100:1)
Did you solved your's problem ?
If you solved please help me !!!
Best regards
Dejan
I bet your speakers don't work either...
Try tapping the phone, I heard that happened after a bad drop...
Just...(as weird as this sounds) keep tapping it...very firmly.
Search around and see some other methods.
my o2 exec having the same problem too. i didnt drop the phone at all..
i m got the latest news from the technician.. he said the connector is broken. so, i think is time to change to new phone.
sound thing happened to me .. i took out the battery blew on it and replaced .. the sound worked :s
as for the camera .. still working on it
Ok
dr_derqami said:
Hi i think i have solved the problem (at least i had the same problem and now my universal is workin)
what i did was so simple 1. downloaded user manual from xda ftp
2. disambled the device according to instructions, i took out the main camera and replaced it back.
3. reinstalled the rom. now its okey just working like before.
(it may be a camera connector issue.)
Click to expand...
Click to collapse
i had this once after installing a new rom, this was easily fixed with a hard reset, and then a new rom install after hard reset , i think it is more a driver issue rather than hardware.
Ok
dr_derqami said:
Before doing this i made lots of hard resets and i used all wm5-6 roms available, anyways: people, before disassembling ur universal make hard reset in case it works )
Click to expand...
Click to collapse
TBH id certainly not recommend anyone disassembling there devices unless they know 100% what they are doing and the device is out of its warrenty.
Ok
I had the same error message.
I am sure it was NOT an hardware issue, because each time I reinstalled the OS (VM5) of my device, the camera was working fine, and won't work after the first reset.
You can see my whole story an a possible workaround here :
http://forum.xda-developers.com/showthread.php?p=1741662#post1741662
Related
Worked ok last night, then it crashed (mad colours on screen), so I had to do a FULL restore of radio and rom (seemed to be stuck in bootloader).
So, reinstalled everything, all good, I just cannot get it to turn on WIFI. I go into comm manager, click on wifi, and it tries to turn it on, then comes back with a X next to the icon.
Also the front today screen plugin (the wifi/bluetooth one) doesnt say WIFI: off anymore. Just has Bluetooth:Off
Any ideas
THANKS!
Try to flash back the rom again..
By the way, what rom do u used?..
I only just flashed it again ..
I used the O2 rom 'Xda_Exec_Upgrade_v1.30.162'
Can you recommend another ROM that might fix it?
Also, does reinstalling a ROM reinstall all the drivers? As I've noticed some things stay resident even after a flash; call timers for one..
thanks
while im waiting for replies, im going through roms
trying different AKU ones now from the ftp
could it be a radio issue?
My QTEQ 9000 are on the same situation, made some stripes on the screen and now can´t detect anything!!
The wifi apears I start it but can´t get any signals!!
Any help please?????
i upgraded radio to 1.14 and still same
Try these ROMs
You can find on the forum, Ivan's and Helmi's ROMs.
They are the latest AKU 3.2 and seems to work just fine as O2 ROMs are just AKU 2.X!
I think the problem lies deeper than a hard reset/rom as well, it must do after installing 3-4 roms, and a couple of radios.
Yes ive tried UNI_AKU3_5_WWE_IVAN_Test2 ROM as well.
Same.
Anyone else got any solutions as to what it might be?
installing the latest qtek rom off buzzdev now, includes full radio/rom/ext rom. if this doesnt work, then f**k it, ive spent enough hours on it, and i'll just get a new one on contract tomorrow.
thanks for the people that replied
what about the driver disk, isnt there a wifi thing on there
maybe im dreaming
Have a look in the network adapters list and see if the Tiacxwln card is listed, if not sounds like it is a hardware rather than a driver problem. It's not unheard of for computer hardware to fail for apparently no reason. This is likely if you have tried different ROMs and none of them work.
I´ve tried upgrade radio to 1.14 and I tried Ivan's and Helmi's ROMs.
and the problem persists!!!
Tiacxwln card is listed.
Strange situation because during one year worked very well and suddenly make some stripes on the screen and now don´t detect nothing!!
Maybe antenna problem??
Help us??
Is there a problem with o2 official rom?.. Heard few people also got a problem if flashing to o2 rom..
Nope, not working, tried qtek roms, a new orange rom, still wifi not coming on.
Yes the card does show in network cards.
Oh well
Any help Please???????????????????????????????
Hi all,
My Diamond is acting weird lately; sometimes (so far it seems at random) when I turn on the device (from standby), the display is grey'ish / scrambled, and nothing works. I have to removed the battery to get it working again.
This happens with all ROMS found here (haven't tried stock rom yet).
Anyone know what this might cause?
I'm running dev. edition SPL from olinex...
Any tips would be greatly appreciated!
/edit; Could this be SPL related?
Maybe perform the hardSPL again?
Reform the battery for a minute. After this hard reset your device a few times.
If this doens't fix the problem use your original ROM and send the device back for repair.
Would be my solution
I have the same problem. Diamond swiches to standby mode and does not resume or just the light switches on and the screen is blank. Sometimes, it even switches off while booting. All the time, I have to remove the battery. And after some "battery remove resets", the error seems to occur more and more often. It also suddenly looses the phone signal but immediately finds a new one ofter 1-2 seconds.
I think it is somehow related to the phone chip-whatever. Because when I turn the phone of it seems to run more stable. Errors are not gone but at least I can use it as a mp3 player then.
I tried lots of roms but none of them worked fine. I even restored the original spl to make sure it is not the spl. But error is still there... stronger than ever
I will send it back to htc. This thing is obviously broken. Its one of the typical qualcomm errors. These chips are... what do you say in english... moody? My old polaris had a similar error. the 3g part of the phone went away.
TerianSilva said:
I have the same problem. Diamond swiches to standby mode and does not resume or just the light switches on and the screen is blank. Sometimes, it even switches off while booting. All the time, I have to remove the battery. And after some "battery remove resets", the error seems to occur more and more often. It also suddenly looses the phone signal but immediately finds a new one ofter 1-2 seconds.
I think it is somehow related to the phone chip-whatever. Because when I turn the phone of it seems to run more stable. Errors are not gone but at least I can use it as a mp3 player then.
I tried lots of roms but none of them worked fine. I even restored the original spl to make sure it is not the spl. But error is still there... stronger than ever
I will send it back to htc. This thing is obviously broken. Its one of the typical qualcomm errors. These chips are... what do you say in english... moody? My old polaris had a similar error. the 3g part of the phone went away.
Click to expand...
Click to collapse
Sounds bad
I'm trying an updated radio rom at the moment, we'll see if it hangs today...
mikkelnl said:
Hi all,
My Diamond is acting weird lately; sometimes (so far it seems at random) when I turn on the device (from standby), the display is grey'ish / scrambled, and nothing works. I have to removed the battery to get it working again.
This happens with all ROMS found here (haven't tried stock rom yet).
Anyone know what this might cause?
I'm running dev. edition SPL from olinex...
Any tips would be greatly appreciated!
/edit; Could this be SPL related?
Click to expand...
Click to collapse
Hi mikkelnl... from what you described, it seems to be a typical problems with the SPL you are using. Depending on which SPL that the original ROM that came with your device, you can resolve by installing the respective 1.37 OliNex HardSPL Unsigned or the 1.93 OliNex HardSPL Unsigned by cmonex.
Try to get it from the same thread that you got the 1.40 OliNex HardSPL-Developers Edition. There is also some explanation on the problems that you are experiencing.
One more thing, Radio 1.00.25.08 also appears to have some detrimental effects on some devices after some usage. And it has a lingering effects too. Try use Radio 07 if you are in Europe or Radio 05 if you ar in Asia...
Having said all these, I must state that these are purely my observations and you really need to try it out for yourselves to know whether it works for you. I have given the same advice to about 5 users experiencing these problems and it had worked for them so far.
Swiftblade said:
Hi mikkelnl... from what you described, it seems to be a typical problems with the SPL you are using. Depending on which SPL that the original ROM that came with your device, you can resolve by installing the respective 1.37 OliNex HardSPL Unsigned or the 1.93 OliNex HardSPL Unsigned by cmonex.
Try to get it from the same thread that you got the 1.40 OliNex HardSPL-Developers Edition. There is also some explanation on the problems that you are experiencing.
One more thing, Radio 1.00.25.08 also appears to have some detrimental effects on some devices after some usage. And it has a lingering effects too. Try use Radio 07 if you are in Europe or Radio 05 if you ar in Asia...
Having said all these, I must state that these are purely my observations and you really need to try it out for yourselves to know whether it works for you. I have given the same advice to about 5 users experiencing these problems and it had worked for them so far.
Click to expand...
Click to collapse
Hi Swiftblade!
Thanks for the reply. I've read about those newer SPL versions, but I didn't think it was the reason for my problems, since I have one of the first Diamonds (can't remember the spl version ). And; the thread mentions "fuzziness issues on some newer diamonds", my screen is not 'fuzzy', it simply is scrambled and the device completely hangs. So I didn't figure that would be the problem
Anyways; I am a bit reluctant to install a new SPL, never did that before...
mikkelnl said:
Hi Swiftblade!
Thanks for the reply. I've read about those newer SPL versions, but I didn't think it was the reason for my problems, since I have one of the first Diamonds (can't remember the spl version ). And; the thread mentions "fuzziness issues on some newer diamonds", my screen is not 'fuzzy', it simply is scrambled and the device completely hangs. So I didn't figure that would be the problem
Anyways; I am a bit reluctant to install a new SPL, never did that before...
Click to expand...
Click to collapse
Hi mikkelnl.. It's really worth a try. the description on the thread is of course vague. It is actually to deal with some discrepancy issues between SPL and the device's specification.
Doing a HardSPL will not affect your rom but it will hard reset it so you get a fresh clean rom. Do perform a backup before you do a HardSPL though. My best bet is 1.37 OliNex HardSPL Unsigned.. Cheerz
Edited: If this HardSPLs can't solve your problems then it might be a hardware issue that you are facing...
Well, I just installed 1.37 olinex, let's see if this helps
Thanks for the input Swiftblade! Now I'll just have to re-setup your 7.0 rom
mikkelnl said:
Well, I just installed 1.37 olinex, let's see if this helps
Thanks for the input Swiftblade! Now I'll just have to re-setup your 7.0 rom
Click to expand...
Click to collapse
Hope it works out for you bro... Good Luck!
Hi ll,
I really out of ideas here .
I was running Pays 1.9 Bravesoul ROM without any issues for about 4 months on my unbranded Desire(HBOOT 0.75)!
Today I decided to update to Froyo.
I used Rom Manager to upgrade to OpenDesire 3.03 and Radio 32.43.00.32U_5.09.00.20.
Every thing went well, except that I noticed that the MIC doesn't work at all.
Not when I make or receive a call, Not if I try to Mute/Unmute it, Not if i try to Record sound, or Video or WHATEVER!!! The only way the other side can hear me is trough my BT headset.
So I tried to use the LeeDroid 1.7a ROM but same result. Also tried to use different Radio - 32.42.00.32U_5.09.00.08.
I then Nandroid restore to my 1.9 Pays rom (Wiping Data+Cach+ext), but still doesn't work. I tried different Radios:
32.37.00.32U_4.06.00.16_2
32.36.00.28U_4.06.00.02_2
32.26.00.24U_4.04.00.03_2
same thing...
I finally Unrooed my Desire to v1.15.4 Radio 32.30.00.28U_4.05.00.11 without any luck!
So I'm pretty hopeless Please if someone also have / had this issue, Please share!
Thanks!
sounds to me like it's broken mate
i know it's coincidence that it broke as you changed ROM but if it doesn't work on anything there's no explanation
have you tried a hard reset + clearing caches?
if you have then unroot your phone, put it back to your original RUU for warranty purposes and sent it back for repair
by what do you mean Hard Reset?
I wiped all data, I've changed roms.
Currently It's unrooted...
Is it possible for the Radio update to do this? (all the updates went without a hitch)
Or maybe the OpenDesire ROM (I see that v3.03 is removed, do you know why?) did this?
There is no way it a coincidence. I making phone calls all the time, The update took me about 15 min, after which I tried the Video camera and noticed there was no sound...
Thanks!
well, I noticed that the mic works, but extremely week! I really need to shout in order to hear a whisper... I do this in recording...
I'm starting to believe that maybe it's the mimbrein (Or the piezzo) that is ruined inside the mic...
Is it possible to control the gain in software? (Is there still a chance that the S.W upgrade caused this?)
After installing Radio 2.05.00.06.11 (dinc_ota.zip), my handset speaker audio disappears. Speakerphone and bluetooth work fine, but no luck with the internal speaker.
Heres the kicker:
Once I restore the 1.0 Radio, the internal speaker starts working again.
After lots of searching, this seems to be a very intermittent problem. I've only found two other people experiencing the same issue. Unfortunately I have not found a solution.
Does anybody have any idea as to what my next step should be to try and solve this?
Thanks!
I have the same problem...
heega1 said:
After installing Radio 2.05.00.06.11 (dinc_ota.zip), my handset speaker audio disappears. Speakerphone and bluetooth work fine, but no luck with the internal speaker.
Heres the kicker:
Once I restore the 1.0 Radio, the internal speaker starts working again.
After lots of searching, this seems to be a very intermittent problem. I've only found two other people experiencing the same issue. Unfortunately I have not found a solution.
Does anybody have any idea as to what my next step should be to try and solve this?
Thanks!
Click to expand...
Click to collapse
Try downloading a fresh copy of the update and running it again?
It's working just fine for too many people for it to be a problem with the update itself.
douger1957 said:
Try downloading a fresh copy of the update and running it again?
It's working just fine for too many people for it to be a problem with the update itself.
Click to expand...
Click to collapse
updating the radio twice will brick the phone! same one that is.
zeke1988 said:
updating the radio twice will brick the phone! same one that is.
Click to expand...
Click to collapse
not exactly. but, this radio isnt a image, its a patch. and a double patch is not the same thing... there is no error checking. dont do it!
I've tried re-installing the update 3 times from three sources. At first I thought it was the Froyo update so I went back to my nand backup and that didn't help, but once I downgraded the baseband it magically started working again.
So I tried it again. Re-downloading all the tools and packages. Only for it to happen again right after the Radio update. So I reverted back, cleared everything to factory, did a fresh install, then did the upgrade once more.... Still same problem.
Since it is such an intermittent issue, I'm thinking that maybe the hardware is to blame. The particular handset that I have is a warranty replacement from Verizon (blown speakers on first one). Maybe that has something to do with it.
Anyone have any other theories?
Thanks!
So I'm stumped. It's a pretty straightforward process, and I can't see where I'm going wrong.
Next Step: Warranty Replacement. We'll see if that helps. I'll be sure to record the serial number and other details of the phone before I send it back. Maybe we can find a pattern.
It will be a couple days before the new phone arrives. If you have something I can try, please suggest away!
Thanks!
I am having the exact same problem. I have tried both 2.x radios and both have the same effect. I want to use froyo but the only way to is to use speakerphone or a plugged in headset. I tried to take it in yesterday but the tech at verizonwireless told me to wait it out until 2.2 comes out to see if that fixes my problems. ( went in stock told them I was having the problem on stock radio) final problem being is when official does come out and it kills my headset speaker is it going to be too late to root my phone knowing the replacement I get will already be loaded with the new software.
Chicken and Egg
Unfortunately, unrEVOked has not developed a S-ON patch. This means that you will either have to take stock 2.2 which will be unrootable -or- you will patch forever, have S-OFF, get stock 2.2 and not be able to return the phone if the problem doesn't clear up.
Please keep that in mind when making your decision.
The replacement phone worked...
Not sure what the problem was, but it confirms my method for installing 2.2 wasn't flawed..
Thanks for all your help!
-j
I am trying to get verizon to send me a new one. They are not being very helpful right now. They said the audio issue is a software issue that should be fixed with the new update but might send me a new phone due to number of dropped calls. I have to stop in store tomorrow
my camera or torch wont work tried every thing Reseting factory settings and removing rom and reinstalling and tried new roms like mild wild 3.2 and 4.2 and revolution's rom everything format memory card removed DCIM folder no thing happens bought a new memory card and re installed the stock 2.2 rom from htc RUU and nothing
I have passed my warranty and i just want to know what to do??? or a way to know that the camera is not faulty because iam sure its ok just to know ehere the problem is
what happened is it just stopped working and the phone is good the led lights are ok and headphone jack is running only the camera has this problem
bas_imam said:
my camera or torch wont work tried every thing Reseting factory settings and removing rom and reinstalling and tried new roms like mild wild 3.2 and 4.2 and revolution's rom everything format memory card removed DCIM folder no thing happens bought a new memory card and re installed the stock 2.2 rom from htc RUU and nothing
I have passed my warranty and i just want to know what to do??? or a way to know that the camera is not faulty because iam sure its ok just to know ehere the problem is
what happened is it just stopped working and the phone is good the led lights are ok and headphone jack is running only the camera has this problem
Click to expand...
Click to collapse
Well, looks like it went bad hardware. You can try taking the device apart, and check connections for broken or looseness, , or take it to a shop for repair and they can do this.
It doesn't look like a software issue if you went stock and the issue was still there.
Moscow Desire said:
Well, looks like it went bad hardware. You can try taking the device apart, and check connections for broken or looseness, , or take it to a shop for repair and they can do this.
It doesn't look like a software issue if you went stock and the issue was still there.
Click to expand...
Click to collapse
It Happened to me once before and just worked after flashing another rom so i thought it could be the same problem and tried another roms but no result
Iam not that good in taking things apart (never could get things one piece together again )
if you know a tool to check for hardware just to be sure where the problem is and repair shops here in my country are not any better than my skills