Hi to all ,
New to this forum and need help with my first Android 4.4.4 head unit, I have little to none knowledge
Was driving using Sygic navigation, suddenly navigation froze, then unit reboots into recovery mode by itself, I clicked reboot now and it worked fine, until I tried to listen to radio ao know that steering wheel button are not working, contacted the seller and he sent me an MCU file in rar, I did an updated and everything went wrong saying error ...update failed I think he sent wrong MCU and all the buttons are not working or assigned wrongly,radio not working too . I tried several MCUs found it here but none update my unit always saying update failed
Thank you
MCU version
MTCB-KSP-V2.85
Android 4.4.4 / 1024x600 / quad core
AJBRAVO1 said:
MCU version
MTCB-KSP-V2.85
Click to expand...
Click to collapse
Did you already tested all the 3 KSP MCUs listed here?
http://forum.xda-developers.com/showthread.php?t=3246386
MCU Version
Yes,
I Did try all three but still getting the same result ,,,,error update failed ... called the seller and he sent MCU,RAR and it did not work too.
Thank you
I tried all three KSPs again with no luck but did notice this MCU version changed from original KSP-2.85 to KSP-2.79 the 2.79 was from the site but I didn't see any update taking effect...... still buttons act differently home button will turn off , GPS button will mute un mute , no radio , factory setting key changed and I don't know the new one ,power button will not turn off unit.
Many thanks to anyone trying to help
AJBRAVO1 said:
I tried several MCUs found it here but none update my unit always saying update failed
Click to expand...
Click to collapse
About what you said there, did you also try non-KSP MCUs in the past?
MCU Version
No
I did not try non KSP.
If no other KSP MCUs are available on the net, AFAIK then the last chance left is to request again the correct MCU and ROM files from your seller/manufacturer.
MCU Version
Hi,
I did asked the manufacturer for original MCU and ROM files , hope this will fix it.
Thank you
Got new ROM files and MCU and its working well except no steering wheel control , controls will work for some time then will not, I mean I was able to assign steering wheel control after the updated but lost after few days, tried to re assigned but it didn't work will not take effect . MCU provided by the manufacturer different from the original one that came with the unit it went from KSP v2.85 to KLD6 v2.85 but its working now except steering wheel control.
Thank you all for trying to help
I'm no expert and I can't solve your problem but going from one manufacturers MCU to anothers goes against everything I've read on this forum.
Sent from my SM-G920F using Tapatalk
Related
please help, my mda keeps showing this message, the camera doesnt work and the sound doesnt either, ive returned it to htc europe for repair twice, the first time they changed the mainboard, i got it back and it worked for about a minute then when i next tried the camera, the message appeared and the sound went, as in not even a beep when moving the slider, i returned it to them thinking theyd done a cr*p job but they changed the mainboard again blaming that as the problem, i know they are the ones that make it but it seems they dont actually know whats wrong with it, as twice it has worked and the same result, worked for a minute then no sound no camera, its been going back and fourth for over a month, anyone any idea's??? ive tried the obvious, hard resetting, ive not installed any software third party or otherwise.
yikes i need this to work, possible problem with the firmware?
rom version: 1.30.114 wwe
rom date: 04/13/06
radio version: 1.10.03
protocol version: 42.44.p8
extrom version: 1.30.232 wwe
Camera Failed
Dear friend,
J have the same problem. (Failed to initialize camera 36001:100:1)
Did you solved your's problem ?
If you solved please help me !!!
Best regards
Dejan
I bet your speakers don't work either...
Try tapping the phone, I heard that happened after a bad drop...
Just...(as weird as this sounds) keep tapping it...very firmly.
Search around and see some other methods.
my o2 exec having the same problem too. i didnt drop the phone at all..
i m got the latest news from the technician.. he said the connector is broken. so, i think is time to change to new phone.
sound thing happened to me .. i took out the battery blew on it and replaced .. the sound worked :s
as for the camera .. still working on it
Ok
dr_derqami said:
Hi i think i have solved the problem (at least i had the same problem and now my universal is workin)
what i did was so simple 1. downloaded user manual from xda ftp
2. disambled the device according to instructions, i took out the main camera and replaced it back.
3. reinstalled the rom. now its okey just working like before.
(it may be a camera connector issue.)
Click to expand...
Click to collapse
i had this once after installing a new rom, this was easily fixed with a hard reset, and then a new rom install after hard reset , i think it is more a driver issue rather than hardware.
Ok
dr_derqami said:
Before doing this i made lots of hard resets and i used all wm5-6 roms available, anyways: people, before disassembling ur universal make hard reset in case it works )
Click to expand...
Click to collapse
TBH id certainly not recommend anyone disassembling there devices unless they know 100% what they are doing and the device is out of its warrenty.
Ok
I had the same error message.
I am sure it was NOT an hardware issue, because each time I reinstalled the OS (VM5) of my device, the camera was working fine, and won't work after the first reset.
You can see my whole story an a possible workaround here :
http://forum.xda-developers.com/showthread.php?p=1741662#post1741662
Hi All,
i sometimes use a GPS tracking app for when im out on my bike to track miles and stuff, last week for some reason it didnt work, then when i tried to use navigation a message across the bottom said something like SEARCHING FOR GPS and never changes or locks onto my position.
i havent changed anything that i can remember only installed new apps,
my phone is rooted and ive tried several new roms but none of them solve the GPS problem i have, ive read up and tried several solutions using apps to reset GPS and a patch that changed the GPS.conf file but to no avail.
could it have anything to do with an outdated radio ?? the details of my phone are
Rom SVHD1.61
Android 4.0.4
Sense 4.1
Baseband 12.56.60.25U_26.10.04.03_M
i know the radio version is the last part of the baseband and there is a newer one listed in this thread
http://forum.xda-developers.com/showthread.php?t=877295
the nearest to mine is dated 23rd June 2011 but the listed one has no letter U in the middle.
could someone please advise which radio will be safe to use as i dont want to brick my handset, and can i flash it using CWM as a zip like i do the roms or do i have to do it another way
thanks in advance
shippey121 said:
Hi All,
i sometimes use a GPS tracking app for when im out on my bike to track miles and stuff, last week for some reason it didnt work, then when i tried to use navigation a message across the bottom said something like SEARCHING FOR GPS and never changes or locks onto my position.
i havent changed anything that i can remember only installed new apps,
my phone is rooted and ive tried several new roms but none of them solve the GPS problem i have, ive read up and tried several solutions using apps to reset GPS and a patch that changed the GPS.conf file but to no avail.
could it have anything to do with an outdated radio ?? the details of my phone are
Rom SVHD1.61
Android 4.0.4
Sense 4.1
Baseband 12.56.60.25U_26.10.04.03_M
i know the radio version is the last part of the baseband and there is a newer one listed in this thread
http://forum.xda-developers.com/showthread.php?t=877295
the nearest to mine is dated 23rd June 2011 but the listed one has no letter U in the middle.
could someone please advise which radio will be safe to use as i dont want to brick my handset, and can i flash it using CWM as a zip like i do the roms or do i have to do it another way
thanks in advance
Click to expand...
Click to collapse
I had the same problem as you, and I have tested some roms wotihout succes... I have also tried to flash a new radio, I did it two days ago and it also didn´t improve my gps so I still without it... the only thing that could say to you is that there is a post that show you how to improve the gps but it is by solding under the flash of the camera and it is hardware so i am not going to try it
good luck
azuelagomez said:
I had the same problem as you, and I have tested some roms wotihout succes... I have also tried to flash a new radio, I did it two days ago and it also didn´t improve my gps so I still without it... the only thing that could say to you is that there is a post that show you how to improve the gps but it is by solding under the flash of the camera and it is hardware so i am not going to try it
good luck
Click to expand...
Click to collapse
since posrting, ive tried several things to fix this, still with no success,
ive tried several different roms including a stock rom but none woked.
ive update the radio to a newer one and still nothing
i removed the flash cover ad tested with multimeter and it seems to be ok,
i attached a piece of wire to the contacts on the phone and managed to get GPS fix on 2 satelites so bought a new cover but no fix,
as mentioned above i soldered another piece of wire inside underneath the flash cover to the contacts but now i dont get any GPS, with the cover on or off, guess its broken.
can the GPS board be tested in anyway or replaced, ive searched google but cant seem to find anything so im guessing its part of the main board
im in the UK if anyone knows that i could get it fixed.
cheers
Hi Everyone,
I'm new here and I search the forums but didn't find anything that would fix the issues I'm having.
I bought a kickstarter edition through the internet on the cheap that wasn't working but showing up in adb.
So I checked it out, ran recovery and flashed the latest ouya firmware on it.
Now the Ouya booted, and averything is working except for the sound.
I tried unplugging and replugging, I tried cables and different tv, checked out the volume settings, not muted.
So far nothing is working.
I read some topics on other android devices where they had to modify a file on the sytem to get audio working again.
Now I hope someone has had the same issue and can help me to fix this.
Greetz,
Rik
Ok people,
I'm very stupid.
While recovering the ouya i put my tv selection mode to PC instead of HD.
When switching this back it worked right away.
Mods please close this thread.
Rikdegraaf said:
Hi Everyone,
I'm new here and I search the forums but didn't find anything that would fix the issues I'm having.
I bought a kickstarter edition through the internet on the cheap that wasn't working but showing up in adb.
So I checked it out, ran recovery and flashed the latest ouya firmware on it.
Now the Ouya booted, and averything is working except for the sound.
I tried unplugging and replugging, I tried cables and different tv, checked out the volume settings, not muted.
So far nothing is working.
I read some topics on other android devices where they had to modify a file on the sytem to get audio working again.
Now I hope someone has had the same issue and can help me to fix this.
Greetz,
Rik
Click to expand...
Click to collapse
Hello.
For My OPEL ASTRA J Android autoradio, with the firmware RK3066 - Malaysk ROMs - update_+4_4_4_1024X600_14_RK3066_MAL_11_12_2015
After upgrading the MTC Keys remap Xposed module to this lastest version and modify some settings in the factory settings menu (but I didnt touche the canbus options, but maybe " wheelstudy", "Keymap"a dn "Touchmap" options). I reboot so that the change can be applied.
Following that, The autoradio has well restarted but I don'y have any hadware buttons working, and neither the touch screen, so i can't do anything !!!
I never suceed to get into recovery and always upgrade thougt an auto- detection of a firmware file on the sd-card...
I don't know what to do.
Thanks for your help !
Try if using an USB keyboard or mouse can help you.
RESOLVED !
Thnak you very much for your advice.
I plugged a logitech usb unifying receiver for mouse and it works immediately !!
I've also tested Team Viewer quick support to take control from my PC. it works too.
I reflashed a firmware and my problem was gone..
I suspect the last MTC Keys remap Xposed module to be the cause...
Glad you solved!
Can anyone shed any more light on this issue? I have a joying unit that exhibited exactly the same behavior. I installed the latest version of Malaysk's rom for my device and everything looked fine. I set up all my apps and got everything working how I wanted it. When I got in the car to leave for work this morning the unit booted normally but I had no touch screen or hardware buttons. Only the power button worked. I found your thread so I tried doing a factory reset but no luck. I had to re-install the ROM (same exact one) and the problem went away.
How can I prevent this in the future?
-Matt
This weekend I was messing with custom boot animations that would cause that issue, no touch response and only the power button worked. The issue would show up if the animation failed out but the system completed the boot up. The only way I could restore it was to reload the ROM and it happened on both Malaysk's and booroondook's ROMs. It was almost like it caused the touchscreen's driver to crash or prevented it from loading.
That might explain the problem. The rom has an option to disable the boot animation. Now that you mention it, I think that was the last thing I did before shutting down for the night. I have not changed that setting since and the problem has not returned.
Sent from my XT1095 using Tapatalk
---------- Post added at 04:25 PM ---------- Previous post was at 04:23 PM ----------
I should point out that you should be able to plug in a mouse and use that to restore your boot animation without having to flash the rom again
Sent from my XT1095 using Tapatalk
Yeah I didn't think about that at the time. Oh well.
I installed the factory version 4.4 ROM Unfortunately, the buttons on the steering wheel and radio do not work. The rest works without any problems. I installed other versions, but unfortunately the problem still remains In the settings section, I tried to adjust the buttons manually, but it did not work
mtcb kld6 v3.06 rk3188 s07
i change mcu to other version too but notting