Hello,
Could you please help me with a broken phone?
I have Samsung A50 but the screen is off and cannot turned on because maybe is dead ... with the touch is the same.
Could you please tell a way to reach the device vie laptop ( windows )
The problem is that the USB Debugging is off.
I need to restore the data from Viber and standard files ...photos, videos, ....
Thank you in advance and sorry for my English...
fissikela said:
Hello,
Could you please help me with a broken phone?
I have Samsung A50 but the screen is off and cannot turned on because maybe is dead ... with the touch is the same.
Could you please tell a way to reach the device vie laptop ( windows )
The problem is that the USB Debugging is off.
I need to restore the data from Viber and standard files ...photos, videos, ....
Thank you in advance and sorry for my English...
Click to expand...
Click to collapse
press the volume up and down and powerbutton all at the same time , hold this for about 15second , this should force a reboot ( if battery isn't at 0% )
Related
hello. sorry for my poor english. i am trying to install a ROM on my htc diamond but when the flashing starts my phone looses connection to my pc (active sync) this happends when the 3 color lines is shown on my phone's screen. do anyone know how to fix this problem. thanks
ROM Update
xvision1992 said:
hello. sorry for my poor english. i am trying to install a ROM on my htc diamond but when the flashing starts my phone looses connection to my pc (active sync) this happends when the 3 color lines is shown on my phone's screen. do anyone know how to fix this problem. thanks
Click to expand...
Click to collapse
Hi!
Not sure if that works but if this is your first time to flash the drivers to recognize your device in bootloader mode needs to be installed which takes some time.
Try to put your device into bootloader mode (keep VolDown pressed during reset) than plug in USB. Diamond screen at bottom will change from Serial to USB if recognized and device drivers installed.
Now start up ROM Update and perform flash. You should MTTY before every flash.
Regards,
Cina.
hi. I encountered a problem on my phone that doesn't boot properly.
When i tried to switch on my phone it showed at first the welcome msg "Samsung S4 mini gt-i9192" then after that, a pitch black screen, could not properly boot. But i learn that it does not turns off after the screen turns all black, i have to press the power button first to turn off the phone.
This problem started when i installed an app with some compatibility problems.
I wanted to root my phone hoping that can solve the problem, but then again a problem occurred when i tried to connect my phone to my laptop. It fails to install MTP usb device to my computer. I tried connecting it again provided that samsung kies was installed but again failed to connect my phone. Therefore i cant root my phone because i cant copy the files needed to root to my phone sd card.
I tried reinstalling kies, installing mtp drivers but nothing happened. I tried also restoring the previous boot image, restoring factory settings using recovery mode. But then problem still exist.
And fyi my phone can't mount any external sd card using recovery mode. And i think it was not in a debugging mode.
Phone: samsung s4 mini gt-i9192
firmware: i dont know
So basically, the problem is:
my phone wont boot,
i cant connect it to my pc
and i cant root it.
How should i root or even flash my phone when i cant connect to my computer? Do you have any idea on how to solve this problem? Any solutions or suggestions would be much appreciated. tnx.
champagneerantja
emzgames said:
snipped.
Click to expand...
Click to collapse
Have you tried putting the phone in download mode (Volume Down + Home + Power) and then connecting it your p,c , if not give this a shot it should pick up the drivers , once done , take out the usb cable hold the power the button to shut down and boot up .
since you have not mentioned your OS am assuming it is windows , try taking out Kies via some software like revo uninstaller which will remove all directories plus all registry entires then reinstall it if you really need it.
dovakinn said:
Have you tried putting the phone in download mode (Volume Down + Home + Power) and then connecting it your p,c , if not give this a shot it should pick up the drivers , once done , take out the usb cable hold the power the button to shut down and boot up .
since you have not mentioned your OS am assuming it is windows , try taking out Kies via some software like revo uninstaller which will remove all directories plus all registry entires then reinstall it if you really need it.
Click to expand...
Click to collapse
tried both yet still unable to connect.
emzgames said:
tried both yet still unable to connect.
Click to expand...
Click to collapse
dial *#0808# from your cell this would take you in usb settings, tick both mtp+adb , reboot , if they art already ticked uncheck them and check them again.
dovakinn said:
dial *#0808# from your cell this would take you in usb settings, tick both mtp+adb , reboot , if they art already ticked uncheck them and check them again.
Click to expand...
Click to collapse
im afraid i cant do this coz i cant boot my phone properly, up to welcome msg only then screen black out, but not power off.
emzgames said:
im afraid i cant do this coz i cant boot my phone properly, up to welcome msg only then screen black out, but not power off.
Click to expand...
Click to collapse
ohhh best take your cell to your nearest service center then . if you can't flash anything and usb is not getting detected i don't see any other option , maybe someone more experienced here can help.
dovakinn said:
ohhh best take your cell to your nearest service center then . if you can't flash anything and usb is not getting detected i don't see any other option , maybe someone more experienced here can help.
Click to expand...
Click to collapse
yah, thats what im thinking. i just brought this here hoping to solve this problem without going to a shop. thanks anyway.
aac. To me put your phone in download mode then use moborobo(a windows software) . Just open it and it will install the driver. If it dies not work then use adb installer . Remember you should have only any one of the software at one tim means either moborobo or kies or adb installer
Sent from my GT-I9001 using xda app-developers app
btw have you tried to boot the phone in safe mode ?? if it boots in safe mode it is still fixable without going to service center. power down , power up+ tap the menu button 3 or 4 times at THE same time to boot into safe mode if it boots into safe mode that means the hardware and OS is fine if it does not well then your out of luck.
dovakinn said:
btw have you tried to boot the phone in safe mode ?? if it boots in safe mode it is still fixable without going to service center. power down , power up+ tap the menu button 3 or 4 times at THE same time to boot into safe mode if it boots into safe mode that means the hardware and OS is fine if it does not well then your out of luck.
Click to expand...
Click to collapse
tnx man, but no luck..
Tried flashing a custom rom?
Good afternoon friends.
First, sorry for my bad English. I am Brazilian = )
I'm with my totally inaccessible M8 .
I can not enter the fastboot , and also can not enter the recovery mode.
It does not vibrate more, no boot screen appears . That is, completely broken.
When I connect it to PC , open several "units" . With some files ( ex .: WCNSSVER.cfg )
other , no nothing. Anyway, I do not know what to do. This happened after I use
formatting option TWRP recovery . After restarting the recovery , the phone went that way.
Does anyone know what I can do ? Thank you all.
hordanofear said:
Good afternoon friends.
First, sorry for my bad English. I am Brazilian = )
I'm with my totally inaccessible M8 .
I can not enter the fastboot , and also can not enter the recovery mode.
It does not vibrate more, no boot screen appears . That is, completely broken.
When I connect it to PC , open several "units" . With some files ( ex .: WCNSSVER.cfg )
other , no nothing. Anyway, I do not know what to do. This happened after I use
formatting option TWRP recovery . After restarting the recovery , the phone went that way.
Does anyone know what I can do ? Thank you all.
Click to expand...
Click to collapse
There is no fix for what happen. Best chance is to send it into HTC or to your carrier and get it replaced.
I bought a boy in Brazil. I think he bought in aliexpress = \
hordanofear said:
I bought a boy in Brazil.
Click to expand...
Click to collapse
Human trafficking is illegal and immoral.
The screen doesn't come on at all?
redpoint73 said:
Human trafficking is illegal and immoral.
The screen doesn't come on at all?
Click to expand...
Click to collapse
kkkk bad english =(
No. No sign of life . The only sign I have is that when I plug it in the PC , it creates multiple disk drives as if they were internal units of the device.
hordanofear said:
No. No sign of life . The only sign I have is that when I plug it in the PC , it creates multiple disk drives as if they were internal units of the device.
Click to expand...
Click to collapse
Tachi above is probably correct; especially if the PC is giving you a message about Qualcom download mode drivers needed, the phone is probably bricked.
Did you do something to cause the phone to be in this condition?
Hey Guys,
I've a Samsung Galaxy S4 Mini (GT-I9192). It stopped working mid-day all of the sudden while it wasn't in use. The phone is just showing a black screen, & pressing the power button, it doesn't respond. The phone also doesn't respond when I try entering the download or recovery modes. When I connected the phone to the PC, it was identified as "Qualcomm HS-USB QDLoader 9008", & looking up on the internet for what does this mean, I found that it means that phone is bricked.
I never rooted this phone, & I tried to write two I9192 debrick images (One at a time of course ) on an external SD card using Win32DiskImager-0.9.5. However, turning on the phone with any of the two debrick images, the phone shows the following lines exactly, & no further progress takes place:
BOOT RECOVERY MODE
CHECK BOOT PARTITONS..
COPY FROM T-FLAH..
BOOT RECOVERY..
WRITE 139008 sectors..
I couldn't find a solution for this issue on the internet. So, any idea what is happening here & how can I solve this problem ??
Many thanks in advance
diaaamin said:
Hey Guys,
I've a Samsung Galaxy S4 Mini (GT-I9192). It stopped working mid-day all of the sudden while it wasn't in use. The phone is just showing a black screen, & pressing the power button, it doesn't respond. The phone also doesn't respond when I try entering the download or recovery modes. When I connected the phone to the PC, it was identified as "Qualcomm HS-USB QDLoader 9008", & looking up on the internet for what does this mean, I found that it means that phone is bricked.
I never rooted this phone, & I tried to write two I9192 debrick images (One at a time of course ) on an external SD card using Win32DiskImager-0.9.5. However, turning on the phone with any of the two debrick images, the phone shows the following lines exactly, & no further progress takes place:
BOOT RECOVERY MODE
CHECK BOOT PARTITONS..
COPY FROM T-FLAH..
BOOT RECOVERY..
WRITE 139008 sectors..
I couldn't find a solution for this issue on the internet. So, any idea what is happening here & how can I solve this problem ??
Many thanks in advance
Click to expand...
Click to collapse
My phone (Samsung Galaxy S4 mini Duos GT-I9192) is with the same problem, since 2016 October!!. But I know what happened. It was a virus!: In a day, when I turned on my wifi, an unexpected download started . . . , after about 5 seconds, several app's began stopping uninterruptedly, followed by message asking "OK". So, I forced the phone to turn off; waited some time, but when I pressed the power button, nothing happened and it remains like this until now! I have tried all of the things possible by pressing combination of buttons, but it is really hard bricked!!. I just hadn't courage to use any kind of (de/un)brick image yet, like you. I'm continuously researching in the internet and trying to learn how to solve this problem in a secure way. I have found something relating to unbrick qualcomm mobiles using QFIL, but we have to use other kind of archives other than thouse from GT-I9192 original rom, which made me with doubt if it will function.
If somebody understand better than us about it, please help us!
Thanks.
villaovb said:
My phone (Samsung Galaxy S4 mini Duos GT-I9192) is with the same problem, since 2016 October!!. But I know what happened. It was a virus!: In a day, when I turned on my wifi, an unexpected download started . . . , after about 5 seconds, several app's began stopping uninterruptedly, followed by message asking "OK". So, I forced the phone to turn off; waited some time, but when I pressed the power button, nothing happened and it remains like this until now! I have tried all of the things possible by pressing combination of buttons, but it is really hard bricked!!. I just hadn't courage to use any kind of (de/un)brick image yet, like you. I'm continuously researching in the internet and trying to learn how to solve this problem in a secure way. I have found something relating to unbrick qualcomm mobiles using QFIL, but we have to use other kind of archives other than thouse from GT-I9192 original rom, which made me with doubt if it will function.
If somebody understand better than us about it, please help us!
Thanks.
Click to expand...
Click to collapse
Qfil doesn't work with Samsung as far as I know. Even if it did you would have to have the files for your exact phone model.
But I'm going to continue researching. . .
Thank you.
hey villaovb. did you find anything or this problem?
Unfortunatly by mistake i selected formate all+download option in sp flash tool. Now my phone is full dead and internal memory is currupted, when i connecting it to usb it is detecting and suddenly disconnecting again and again, i have tried again by removing battery connector but i'm facing the same problem. White notification light is turned on permanantly untill the battery gone discharged. I have tried all the possible options but nothing happning. Please help to recovery my phone.
Thanks.
RockersQ said:
Unfortunatly by mistake i selected formate all+download option in sp flash tool. Now my phone is full dead and internal memory is currupted, when i connecting it to usb it is detecting and suddenly disconnecting again and again, i have tried again by removing battery connector but i'm facing the same problem. White notification light is turned on permanantly untill the battery gone discharged. I have tried all the possible options but nothing happning. Please help to recovery my phone.
Thanks.
Click to expand...
Click to collapse
First charge it fully, start sp flash tools which is loaded with stock room, press start, then press all three buttons vol up + vol down + power , then connect , and try holding all buttons for the first flash, I sort of bricked my phone, but successfully recovered now.. faced same kind of prob as you... Hope it works... Otherwise go-to a shop..
RockersQ said:
Unfortunatly by mistake i selected formate all+download option in sp flash tool. Now my phone is full dead and internal memory is currupted, when i connecting it to usb it is detecting and suddenly disconnecting again and again, i have tried again by removing battery connector but i'm facing the same problem. White notification light is turned on permanantly untill the battery gone discharged. I have tried all the possible options but nothing happning. Please help to recovery my phone.
Thanks.
Click to expand...
Click to collapse
Emmc corrupted can be repaired by repair shop, so go there, it will cost less than going to service center...