Develop Bugs

[Q] Wake up problems during the call

I need an opinion on this one. I've looked for this problem but it seems not to be clear what is causing it. I have Wildfire S (EU) Marvel. The device is S-On but I unlocked the boot loader and installed CWM. I've already tried several ROMs but it doesn't help to solve the issue. The problem appears during making the call - the screen goes black when you put the phone next to head and after that doesn't want to wake up. The only thing that wakes it up is putting it next to strong light source so I think the light sensor is the one to blame. However automatic backlight seems to be working fine. I really hope that it is not hardware problem. Please give any suggestion to try solving this problem. I would even go for the option to shut down somehow the light sensor because restarting phone after each call is kind of annoying. Thank you in advance for any help you can provide. Sorry for such a long introduction.

anubius said:
I need an opinion on this one. I've looked for this problem but it seems not to be clear what is causing it. I have Wildfire S (EU) Marvel. The device is S-On but I unlocked the boot loader and installed CWM. I've already tried several ROMs but it doesn't help to solve the issue. The problem appears during making the call - the screen goes black when you put the phone next to head and after that doesn't want to wake up. The only thing that wakes it up is putting it next to strong light source so I think the light sensor is the one to blame. However automatic backlight seems to be working fine. I really hope that it is not hardware problem. Please give any suggestion to try solving this problem. I would even go for the option to shut down somehow the light sensor because restarting phone after each call is kind of annoying. Thank you in advance for any help you can provide. Sorry for such a long introduction.
Click to expand...
Click to collapse
long introduction is far better than a short one ...
did you install rom propperly (factory reset/cache clean/dalvik clean)?
did you try using any other dialer app just to check ?
Like this, or this
I think i have read about such problem somewhere, if i find it i will post you the link to it...
also here are some apps to check your proximity sensor :
ProxyLightTester i couldn't find it on market. (not tested)
Proximity Sensor Finder Market link. (tested) and it will report 'all or nothing'

b02 said:
long introduction is far better than a short one ...
did you install rom propperly (factory reset/cache clean/dalvik clean)?
did you try using any other dialer app just to check ?
Like this, or this
I think i have read about such problem somewhere, if i find it i will post you the link to it...
also here are some apps to check your proximity sensor :
ProxyLightTester i couldn't find it on market. (not tested)
Proximity Sensor Finder Market link. (tested) and it will report 'all or nothing'
Click to expand...
Click to collapse
Hi, Thanks a lot for suggestions. So it seems to me that proximity and light sensors work. I tried several software including the one you suggested and the proximity and light sensor respond ok. I also tried different dialer but it doesn't help. I have no idea what can it be. I am thinking to put the device back to the factory state and maybe install official ROM but I am not sure if this will solve the problem. Thank you again for helping. And your device never had this problem?

Never had that problem.. Try reflashing w/o any app2sd gapps and stuff, just clean new rom and try it..
Sent from my HTC Wildfire using xda premium

anubius said:
I am thinking to put the device back to the factory state and maybe install official ROM but I am not sure if this will solve the problem.
Click to expand...
Click to collapse
Before you do that try this build.prop file and see if it helps...Just remove the ".txt" and set your permissions same as the old build.prop file you renamed.

Tera Tike said:
Before you do that try this build.prop file and see if it helps...Just remove the ".txt" and set your permissions same as the old build.prop file you renamed.
Click to expand...
Click to collapse
Thank you guys for all the suggestions I followed your advices but the phone simply refuses to wake up after the call. I am trying to go back to factory default since this is my last hope. Really confused what is causing it.

[Q] [HELP] Unresponsive menu and back buttons

It seems that my menu and back button is possibly broken cause it is not working in "some time". Working then few min, not working.
So is it a hardware problem? or firmware problem? possible conflict in firmwares? I noticed it when i flashed DXLC1 from DXLB1. I've try hybrid v3.0 and repencis v3.0, same problem occurred.
Anybody have the same problem?

makeoutactics said:
It seems that my menu and back button is possibly broken cause it is not working in "some time". Working then few min, not working.
So is it a hardware problem? or firmware problem? possible conflict in firmwares? I noticed it when i flashed DXLC1 from DXLB1. I've try hybrid v3.0 and repencis v3.0, same problem occurred.
Anybody have the same problem?
Click to expand...
Click to collapse
I dont think flashing would damage your buttons. Its not the problem with only you. It happens with me too but a restart resolves it. Have you ever dropped your phone or something?? That could be the only possible reason for that problem

if only they put the question if FAQ section...this forum will looks nice and they'll get the answer.

hell_lock said:
I dont think flashing would damage your buttons. Its not the problem with only you. It happens with me too but a restart resolves it. Have you ever dropped your phone or something?? That could be the only possible reason for that problem
Click to expand...
Click to collapse
Never been dropped. Yeah restarting resolves it temporarily,for me, then it will come back again.

search a post about cleaning the screen in accessories secction. read the method suggested below. try it.

kurotsugi said:
if only they put the question if FAQ section...this forum will looks nice and they'll get the answer.
Click to expand...
Click to collapse
Oh. wrong post? Can mods merge it? or perhaps delete this thread.

kurotsugi said:
search a post about cleaning the screen in accessories secction. read the method suggested below. try it.
Click to expand...
Click to collapse
Thanks, i will try it. I'm out of thanks. Will press it tomorrow.

no need to do that...give your thanks for the real dev instead of me

[Q] System UI has stopped

Hi, I recently unlocked bootloader in my device, and I proceeded to install HD Revolution ROM.
I had some issues, but I solved them. Then, next to install ROM and boot it, appear 3 message error:
- unfortunately system ui has stopped
- unfortunately easyaccessservice has stopped
- unfortunately htc dot view has stopped
I tried to solve this but I cant, I wiped cache (in other post recomend it for this issue) but I try to restart and same error appear. And the phone stays at: Unlocking your SIM card and setting up your phone", but it dont stop.
Any ideas for this??
Thank you.

Nobody had this issue?? Im trying all I know, but I can fix it.
I expect that im not the only one with this issue. Im now without phone

rasteck said:
Nobody had this issue?? Im trying all I know, but I can fix it.
I expect that im not the only one with this issue. Im now without phone
Click to expand...
Click to collapse
Restore you nandroid backup or flash a stock Rom / or RUU

Hi. Yes, I looked for a stock rom, but I dont find it. But anyway I solved it, now that ROM works. Thank you

hi there
can you pls tell us what did you do to solve it ?
am running Android Revolution HD

rasteck said:
Hi. Yes, I looked for a stock rom, but I dont find it. But anyway I solved it, now that ROM works. Thank you
Click to expand...
Click to collapse
I am having this problem on my HTC M9 can you please tell us how you resolved this issue.:crying::crying:

Boot loop with low battery

Hi forum,
I'm not too tech savvy so I can't diagnose this myself, but when my phone is low-ish on battery (randomly when <30%),it goes into a boot loop. It just happened without warning, no software or firmware updates were installed prior.
Has anyone else experienced this and able to provide help?
Thanks guys.

Yes mine too, I thought this problem maybe fix with the Oreo update but still continuing.

brad2409 said:
Hi forum,
I'm not too tech savvy so I can't diagnose this myself, but when my phone is low-ish on battery (randomly when <30%),it goes into a boot loop. It just happened without warning, no software or firmware updates were installed prior.
Has anyone else experienced this and able to provide help?
Thanks guys.
Click to expand...
Click to collapse
shifrin said:
Yes mine too, I thought this problem maybe fix with the Oreo update but still continuing.
Click to expand...
Click to collapse
Please feel free to continue the discussion here.
Thread closed

Unable to unlock after Pie Update

Received today the official European Pie Update. And now it doesn't let me unlock the phone with finger prints or code. And can't shut it down, only restart. Help appreciated.

I do have the same problem - it's not possible to unlock the phone. I restarted the phone into "safe mode" (long-press power button on screen and select "safe mode") but the problem persists.
I can get phone calls and SMS and all, but i only get a black screen if i try to unlock. Only way to get into the GUI is by restarting the phone...
If someone knows what to do besides a factory reset, I would highly appreciate it!

Same in Sweden. Didn´t do backup so hard reset is last thing i whant to try. I have a symbol on the screen i have never seen before, looks like a torx screw .Does anybodu know what that symbol is?

This is just awkward...
I couldn't wait any longer and had to reset my device and now it works again. I was able to login after each reboot so I could make a backup. But it's cumbersome anyway.
This is so bad from LG - after launching a "Software Upgrade Center" and waiting months to get android pie, this was the first time I had problems with an update... Never again LG...

Had to do a hard reset too. Then it worked

I have this problem, too
I'll wait a little bit, maybe we can find another solution, I don't want to wipe my phone, I was to lazy to createa backup

Might be related to the issue I'm having. Google Play Services have stopped working after a failed Play Store update this morning. Phone won't unlock properly with fingerprint, and is scrolling slowly. I'm in the US on Verizon. Updated on Friday and had been working fine until that corrupted update. G710vm20a
Sent from my LM-G710VM using Tapatalk

Someone please give advice, or help me fix it because i can't reset it... i have too much irreplaceable stuff on it.

Ok, I haven't had a problem, but I did a clean install of the leaked kdz from a few days ago. I had a fresh Google backup and sdcard, so I didn't loose anything.

kiszidomi said:
Someone please give advice, or help me fix it because i can't reset it... i have too much irreplaceable stuff on it.
Click to expand...
Click to collapse
Hello. Have you found a solution to the problem? If so, please share how you did it without wiping the phone.

SwedenLGG7 said:
Hello. Have you found a solution to the problem? If so, please share how you did it without wiping the phone.
Click to expand...
Click to collapse
Hi, i couldn't find anything, I had to wipe it. Sorry to disappoint.