Develop Bugs

[Q] Pls help with my moto 360 issue

Pls help with my moto 360 issue
Hi All,
I’ve tried the Motorola Moto 360 Super Tool to recover my watch from an issue on flashing the software/rom using Gohma 2.3 intructions and tools. But after that, my moto360 now is under this mode and stuck always:
1. It always booting to Hboot when plug in with USB connector cable
2. It can not recognize on the PC/Mac always with the error as attached screenshot, that shown: “USB Devices Desabled” or “Power surge on USB ports”…always
link to issue screenshot: https://drive.google.com/file/d/0B1cxZ43OIpuJZUtwYzRfeXNQb2s/view?usp=sharing
So it can not do anything right now, even using the Motorola Moto360 tool to recover it back to factory stage.
Appreciate if u guys can help me on this. It’s been stucking here for over 2 weeks w/o solutions ☺
Tks All and Have a great day to You All!

trungvn1790us said:
Pls help with my moto 360 issue
Hi All,
I’ve tried the Motorola Moto 360 Super Tool to recover my watch from an issue on flashing the software/rom using Gohma 2.3 intructions and tools. But after that, my moto360 now is under this mode and stuck always:
1. It always booting to Hboot when plug in with USB connector cable
2. It can not recognize on the PC/Mac always with the error as attached screenshot, that shown: “USB Devices Desabled” or “Power surge on USB ports”…always
link to issue screenshot: https://drive.google.com/file/d/0B1cxZ43OIpuJZUtwYzRfeXNQb2s/view?usp=sharing
So it can not do anything right now, even using the Motorola Moto360 tool to recover it back to factory stage.
Appreciate if u guys can help me on this. It’s been stucking here for over 2 weeks w/o solutions
Tks All and Have a great day to You All!
Click to expand...
Click to collapse
Power surge means bad cable. Make a new one and try again.

[Q] Speaker and Earphone Problem

M facing a weird problem from Xperia M its earphone jack not working and it start working when i clear cache from smart connect and Reboot it start working but Speaker stop working have to follow same method for speaker to work again any solution Tnx

setia4u said:
M facing a weird problem from Xperia M its earphone jack not working and it start working when i clear cache from smart connect and Reboot it start working but Speaker stop working have to follow same method for speaker to work again any solution Tnx
Click to expand...
Click to collapse
Factory reset your device.

[Q] Hard Bricked HTC 816G Dual sim (MT6592) Infinite Black Bootloop

Hi everyone,
I am using Htc Desire 816G mediatek version( Asia India) #chipset MT6592. Android 4.4.2, Rooted. Please help,
I rooted (iroot) n installed cwm recovery through MTK droid tool, and have a flashable Stock rom (working {made with mtk droid tool by following some guides} ) with a whole backup of its system files that are accessible by SPflash tools.
Problem is i tried porting a [4.4.2] Emotion UI custom rom of same chipset and skipped porting kernel (actually forgot) and after flashing am stuck on a Infinite Black screen Bootloop which reboots itself for every 7-8 seconds, :crying:
Already tried getting into recovery mode by pressing POWER BUTTON+ VOLUME (-) but so success it keeps rebooting! although i have sorted out how to switch it off. POWER BUTTON+ VOLUME(-) + VOLUME(+)
As Spflash tool or Flash tool requires a switched off phone for flashing stock rom but when i connected to PC in off mode it gets on with the same Infinite Black screen Bootloop.....making it undetectable for PC.
Please help me in recovering it back to normal i 've all the necessary files and software! PLS PLS PLS :crying:

help!!!!
I'm too stuck in bootloop. Phone is hard bricked. Not able to do anything. screen in black and while connecting with laptop/pc its disconnecting and connecting again, every 3-4 secs. HTC customer care refused to fix. Please help!!!

If you are going to play with custom ROMs you might as well learn how to open the case and unplug the battery. There are videos on youtube on how to do it, but simply you start at sim slots and pry between the back cover and above the slots with a plastic pry tool or a cut up credit card and work around the phone. The cover should pop off as you go around. The bottom half near the battery is also stuck together with sticky tape so you have to use larger piece of credit card to break the sticky bond. The plastic case is very durable so you don't really have to be too gentle. Unplug battery and plug it back in. Keep cover off till you have working phone. At his point the phone should be off so you can easily hold volume+power to get to boot loader then recovery to load twrp or cwm backup. The cover easily snaps back together. Just plan ahead so all the corners are aligned as you snap around the phone.

rahul332004 said:
I'm too stuck in bootloop. Phone is hard bricked. Not able to do anything. screen in black and while connecting with laptop/pc its disconnecting and connecting again, every 3-4 secs. HTC customer care refused to fix. Please help!!!
Click to expand...
Click to collapse
You can't expect customer support for a device you bricked yourself... Honestly. Pull the battery and hook it up to PC with it out.

Still its connecting and disconnecting. After removing battery also it won't stay connected. Any idea to make it alive?
Sent from my Galaxy Nexus using XDA Free mobile app

rahul332004 said:
Still its connecting and disconnecting. After removing battery also it won't stay connected. Any idea to make it alive?
Sent from my Galaxy Nexus using XDA Free mobile app
Click to expand...
Click to collapse
Did you get into boot loader before plugging in USB cable to PC?

pcjunky said:
Did you get into boot loader before plugging in USB cable to PC?
Click to expand...
Click to collapse
No, i tried formatting with sp flash tool. With all the right drivers it recognized the phone and begin the process, but i got error dram not enable 4032. I read about it. As per suggestion i removed all related files and tried again. Now pc recognize it, it wont go into loop of connecting and disconnect. Now i am not able to flash stock rom into it. I appreciate all of you. Thanks in advance.
Please help with flashing it!!!!
Sent from my Galaxy Nexus using XDA Free mobile app

i have a htc816g i downloaded xposed then installed firmware, phone got stck on android is starting up. pulled out the battery, phone totally dead. not detecting on pc. dim red light on conneting to pc, any solutions? Godbless

Same problem
Hi, i have a Blu Life 8 (MT6592) and as @rahul332004 i'm in the same situation...
After an apparently soft brick that endend in a Infinite Black Screen Bootlog i tried to make a Format with SP flash tool (that was idiot by my part, without any meeting of this) and now a i have a FULL HARD BRICKED PHONE NO FAKE 4K FREE DOWNLOAD...
But i have the hope of you guys can help me.
The phone doesn't turn on, when i connect the usb cable it doesn't seems like if charging or nothing, apparently dead no?... Well this is the magic thing, when i try to Flash again the Stock ROM it Works!... yes, i looks like if doing something, complete the progress bar of flashing and says it's "OK" but really doesn't nothing, still not boot, no charging log, no blu logo, no android logo... What you think?

Xperia M C1905 Headphone problem

Hello Everyone!
So my issue: I wanted to try flashing a new android system on my phone so I made some steps. First I rooted it there was no problem. Second I unlocked bootloader following the instructions on Sony developer website. After that I tried to start up the phone and enter recovery mode using the volume up key. That didn't work and the phone started to boot up but never booted. So I had to remove the battery and then put it back in. After that I've had several tries of booting into recovery mode but with no success. I assume the phone got stuck in a boot-loop. Alright then I falshed the original Android 4.3 stock ROM to my phone using Flashtool software. That actually was successful and my phone was back in it's original state.
So here comes the problem: phone is working correctly but it's like it isn't recognizing the 3.5 mm jack connector. Specificly when I plug in any kind of headphones I can't make the phone to use it in any way, it continues using the speakers. I've tried Sony Smart Connect app, phone still doesn't know that it has got a jack connector. The only way I was able to make the phone actually use the jack output instead of the speakers was to restart the phone with the headphone plugged in: in this case the phone uses only the jack output to play any sounds but not the speaker, even if i unplug the headphone. Still no speakers, phone is just forcing the jack output even if there is no connection... So basically the phone gets stuck either on the jack outpot or on the speakers after restart and I can't make it to use the other one anyhow. Please help me, I've been trying to fix this for hours.
I hope my problem is understandable, I'm not a native english-speaker.
Thanks in advance!

Device redmi 1s dead please help !!!!!

Accidentally my phone droped on the floor after that it kepps the mi logo loop after some time the battery got dead and phone also not charging. While connecting to the charger cable the led blinking and looping. Buy my phone doesn't charging and while on the flash process without battery the fastboot mode opens and closes rythmically.and my computer doesn't take the time to load the drivers. Now what to do feeling dizzy....
Please help me out of this problem. I think it bricked but not hard. Because the fastboot logo comes but not more than 5 seconds it goes off. Please help

Try giving it to a local repair store.
I also had the same problem. If I used to remove and put the battery back, it used to reboot. I tried flashing using fastboot, but it used to reboot every 6 seconds. According to some friends of mine (Thanks to them) I gave it to a store, which in turn (I dunno how) hardbricked the device. I connected it to the PC, tried to go to fastboot, and it shows up as QCOM Loader 9008, which basically tells you your device is hardbricked.
Fastboot didn't work.
Using MiFlash Tool, while flashing through the QcomLoader, it showed "Did not receive hello packet"
Tried many times more, didn't work out.
So, I went and tried the trusted method: TEST POINT method.
It worked out. Now my armani is up and running!
TL : DR;
Try giving it to a local repair store (not Mi service center, they didn't help me AT ALL.)
Something might have dislodged.
Or
Try testpoint method, google for it
it *might* work. Well, that worked for me.

Not end at all
Hi, sorry for very late reply
Recently I discovered that the battery is dead not working at all. And while doing the test point method I think battery power is needed! So I ordered a spare battery after the delivery I will do the test point method agian. Currently if I plug in my phone thorough usb to my computer the qcom 9008 port shows but while flashing it gets detached then re shows up . And the flashtool error happens. I think a battery power is required so that this failure is happening.
So, what do you think is edl mode requires battery power?.
Need help because I have to fix it. It's my one and only loved phone of all time.
Currently I am using my friends phone to discuss about this matter.....please help me.....

parag2001 said:
Hi, sorry for very late reply
Recently I discovered that the battery is dead not working at all. And while doing the test point method I think battery power is needed! So I ordered a spare battery after the delivery I will do the test point method agian. Currently if I plug in my phone thorough usb to my computer the qcom 9008 port shows but while flashing it gets detached then re shows up . And the flashtool error happens. I think a battery power is required so that this failure is happening.
So, what do you think is edl mode requires battery power?.
Need help because I have to fix it. It's my one and only loved phone of all time.
Currently I am using my friends phone to discuss about this matter.....please help me.....
Click to expand...
Click to collapse
You do not need battery power for test point method.