Related
I wanted to upgrade ranju wm6.
Something went wrong and now my device will not start up.
In bootloader mode I can see Serial v1.01
I tried the MTTY (1.6), but can't see a USB port. Even after killing m........exe on host PC.
That only adds an additional port(not comm), but still no USB port.
Therefor can't execute: set 14 0
Please help!!!!!
Would like to go back to WM5 (qtek rom)
Best regards
Exactly the same problem
Hi Guys ,
I got exactly the same problem. Stuck in the bootloader and nothing works anymore. Not even the MTTY tool....
Hopefully someone could help us.
cheers
jurjen
Same Here..
Stuck in bootloader screen after upgrading to ranju's 7.7
that makes three of us.
When I try to enter bootloader is asks me to enter 0 to hard reset?
!
I also got stuck the same way.
solutions given are not working! any other solution?
Same here,
Maybe i've overlooked the universal version.
I understood that the ranju 7.7 is only for the G3 and G4.
Aperently there are more versions of the universal. Where is the version number on my universal? I bought mine as the qtek 9000.
How do you flash the universal when it doesn't boot anymore?
Thnx
Trying to solve the problem I found this:
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
My device seems to have been fixed.
After flashing Ranju 7.7 it took 6 times to align the screen but it is working now.
I will report here if anything terrible has happend , so far so good
Nope
It's not working! All tried...
USB device not recoganised! so first two steps are out!
3rd not working
checked another (correct) Universal
Hi Guys,
indeed I haven't been able to select the USB port in the MTTY tool. But when I try my old phone - a working universal (with broken sound) - I neither make contact with the USB port. So could it be that my laptop has something wrong?
cheers
Jurjen
Hi
Just using the original cable and on another computer it worked
difference between Cables
Hi ,
good to hear that you have fixed your universal. What is the main difference between the original cable and a normal usb cable. And how do I recognise both?
Hope to unbrick mines soon.
cheers
Finally it worked
Hi all,
Indeed when using another cable I got my dearest universal back.
So indeed using another cable can help a lot.
Thanks for all your suggestions.
cheers
Jurjen
Hi guys, I'm totally going crazy with my Nexus in last few days, the problems I'm encountering are the following:
1) There's no way to connect it to my pc, the battery charges, but the pc just can't see the device, I tried with different cables and with other computers, unsuccessfully.
2) My CWM Recovery has problems too: it says "no command" and I can't do anything there.
3) I decided to take advantage of the warranty but first I need to lock the bootloader... here's another problem: my nexus isn't rooted so I can't use applications from play store to do that and, obviously i can't use the cable because of point "1)".
Anyone has an idea? Is there anything I can do except going to the shop and buying another one? Thanks
Mode Odin, Clean and flash stock Android.... It's the only thing i can say....
So I have to follow this guide???
I follow the guide i link above. Then I can use fastboot and I lock bootloader. Now I have only the problem of "no command" recovery and the wall charging!
Thanks frimpasi for the help!!!
Try to reinstall the recovery or try other recovery. And what is the "wall charging"?
Enviado desde mi Galaxy Nexus usando Tapatalk 4
Ok, ghe recovery si ok.
Now there's only one problem: when phone si off I plug USB cable to the battery charger and I see the charging icon. Few seconds later I see another time the same icon. Otherwise if the fone is on and I charge it notthing append. So I can charge the phone only with che computer usb port, but it doesn't comunicate with computer.
WTF? I don't have any idea of what it could be....
Maybe the pc don't recognize the phone because the pc hasn't the drivers... It's an option, but I'm not sure,it's a weird issue....
No, driver went fine! The problem is the same discuss in this thread: http://forum.xda-developers.com/showthread.php?t=2442698
Hi everyone,
I am using Htc Desire 816G mediatek version( Asia India) #chipset MT6592. Android 4.4.2, Rooted. Please help,
I rooted (iroot) n installed cwm recovery through MTK droid tool, and have a flashable Stock rom (working {made with mtk droid tool by following some guides} ) with a whole backup of its system files that are accessible by SPflash tools.
Problem is i tried porting a [4.4.2] Emotion UI custom rom of same chipset and skipped porting kernel (actually forgot) and after flashing am stuck on a Infinite Black screen Bootloop which reboots itself for every 7-8 seconds, :crying:
Already tried getting into recovery mode by pressing POWER BUTTON+ VOLUME (-) but so success it keeps rebooting! although i have sorted out how to switch it off. POWER BUTTON+ VOLUME(-) + VOLUME(+)
As Spflash tool or Flash tool requires a switched off phone for flashing stock rom but when i connected to PC in off mode it gets on with the same Infinite Black screen Bootloop.....making it undetectable for PC.
Please help me in recovering it back to normal i 've all the necessary files and software! PLS PLS PLS :crying:
help!!!!
I'm too stuck in bootloop. Phone is hard bricked. Not able to do anything. screen in black and while connecting with laptop/pc its disconnecting and connecting again, every 3-4 secs. HTC customer care refused to fix. Please help!!!
If you are going to play with custom ROMs you might as well learn how to open the case and unplug the battery. There are videos on youtube on how to do it, but simply you start at sim slots and pry between the back cover and above the slots with a plastic pry tool or a cut up credit card and work around the phone. The cover should pop off as you go around. The bottom half near the battery is also stuck together with sticky tape so you have to use larger piece of credit card to break the sticky bond. The plastic case is very durable so you don't really have to be too gentle. Unplug battery and plug it back in. Keep cover off till you have working phone. At his point the phone should be off so you can easily hold volume+power to get to boot loader then recovery to load twrp or cwm backup. The cover easily snaps back together. Just plan ahead so all the corners are aligned as you snap around the phone.
rahul332004 said:
I'm too stuck in bootloop. Phone is hard bricked. Not able to do anything. screen in black and while connecting with laptop/pc its disconnecting and connecting again, every 3-4 secs. HTC customer care refused to fix. Please help!!!
Click to expand...
Click to collapse
You can't expect customer support for a device you bricked yourself... Honestly. Pull the battery and hook it up to PC with it out.
Still its connecting and disconnecting. After removing battery also it won't stay connected. Any idea to make it alive?
Sent from my Galaxy Nexus using XDA Free mobile app
rahul332004 said:
Still its connecting and disconnecting. After removing battery also it won't stay connected. Any idea to make it alive?
Sent from my Galaxy Nexus using XDA Free mobile app
Click to expand...
Click to collapse
Did you get into boot loader before plugging in USB cable to PC?
pcjunky said:
Did you get into boot loader before plugging in USB cable to PC?
Click to expand...
Click to collapse
No, i tried formatting with sp flash tool. With all the right drivers it recognized the phone and begin the process, but i got error dram not enable 4032. I read about it. As per suggestion i removed all related files and tried again. Now pc recognize it, it wont go into loop of connecting and disconnect. Now i am not able to flash stock rom into it. I appreciate all of you. Thanks in advance.
Please help with flashing it!!!!
Sent from my Galaxy Nexus using XDA Free mobile app
i have a htc816g i downloaded xposed then installed firmware, phone got stck on android is starting up. pulled out the battery, phone totally dead. not detecting on pc. dim red light on conneting to pc, any solutions? Godbless
Same problem
Hi, i have a Blu Life 8 (MT6592) and as @rahul332004 i'm in the same situation...
After an apparently soft brick that endend in a Infinite Black Screen Bootlog i tried to make a Format with SP flash tool (that was idiot by my part, without any meeting of this) and now a i have a FULL HARD BRICKED PHONE NO FAKE 4K FREE DOWNLOAD...
But i have the hope of you guys can help me.
The phone doesn't turn on, when i connect the usb cable it doesn't seems like if charging or nothing, apparently dead no?... Well this is the magic thing, when i try to Flash again the Stock ROM it Works!... yes, i looks like if doing something, complete the progress bar of flashing and says it's "OK" but really doesn't nothing, still not boot, no charging log, no blu logo, no android logo... What you think?
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
mitch1490 said:
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
Click to expand...
Click to collapse
Sorry this is for the desire.
Saf98 said:
Sorry this is for the desire.
Click to expand...
Click to collapse
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Help
mitch1490 said:
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Click to expand...
Click to collapse
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Avan7 said:
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Click to expand...
Click to collapse
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
Thanks a lot! I am going to give it a try .
Blessings.
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
n3m37h said:
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
Click to expand...
Click to collapse
please try removing the battery first.
mitch1490 said:
please try removing the battery first.
Click to expand...
Click to collapse
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
n3m37h said:
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
Click to expand...
Click to collapse
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
This is a forum for the HTC Desire Bravo A8181.
This is a forum for the HTC Desire Bravo A8181.
See with your own eyes.
Help please
mitch1490 said:
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
Click to expand...
Click to collapse
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Metal Addict said:
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Click to expand...
Click to collapse
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
mitch1490 said:
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
Click to expand...
Click to collapse
What version of SP Flashtool are you using?
Well I have tried everything everyone has said so far
No matter what I try I get
BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)
[H/W] Fail to download DA to baseband chip's internal SRAM!
Have tried using both
SP_Flash_Tool_v5.1352.01
SP-Flash-Tool-v5.1532.00
Both do the exact same thing, tried checking the AD DL ALL with Checksum boxes, unchecked usb high speed and full speed. Pressing the down button before plugging it it, after. Nothing I do seems to work, in the device manager it just keeps appearing and disappearing over and over
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (http://mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : http://easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: http://4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Hi
I have desire 200 won't turn on,stay in HTC logo
I just have recovery and fastboot with hboot 1.20.0000,,,s-on
I want to flash any ROM on it
Any one help me,please?
Sent from my V3 Plus using Tapatalk
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: 4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
You my friend are a gentleman and a scholar! downloaded and flashed right away and booted up Am on Win 7 x64 Pro
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Leoisback said:
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Click to expand...
Click to collapse
Yeah I forgot to mention that, you need to use the DA_SWSEC on the SP Flashtool. What's your htc 320 model? Your probably have the wrong rom. The telus one is only for NA device.
EDIT: Are you using the HTC Desire 320 with dual sim: http://drop.ndtv.com/TECH/product_database/images/15201573649PM_635_htc_desire_320.jpeg
If this is your device, the Telus rom is not for your device.
This is the EU rom: http://www.mediafire.com/download/z...NSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
Accidentally my phone droped on the floor after that it kepps the mi logo loop after some time the battery got dead and phone also not charging. While connecting to the charger cable the led blinking and looping. Buy my phone doesn't charging and while on the flash process without battery the fastboot mode opens and closes rythmically.and my computer doesn't take the time to load the drivers. Now what to do feeling dizzy....
Please help me out of this problem. I think it bricked but not hard. Because the fastboot logo comes but not more than 5 seconds it goes off. Please help
Try giving it to a local repair store.
I also had the same problem. If I used to remove and put the battery back, it used to reboot. I tried flashing using fastboot, but it used to reboot every 6 seconds. According to some friends of mine (Thanks to them) I gave it to a store, which in turn (I dunno how) hardbricked the device. I connected it to the PC, tried to go to fastboot, and it shows up as QCOM Loader 9008, which basically tells you your device is hardbricked.
Fastboot didn't work.
Using MiFlash Tool, while flashing through the QcomLoader, it showed "Did not receive hello packet"
Tried many times more, didn't work out.
So, I went and tried the trusted method: TEST POINT method.
It worked out. Now my armani is up and running!
TL : DR;
Try giving it to a local repair store (not Mi service center, they didn't help me AT ALL.)
Something might have dislodged.
Or
Try testpoint method, google for it
it *might* work. Well, that worked for me.
Not end at all
Hi, sorry for very late reply
Recently I discovered that the battery is dead not working at all. And while doing the test point method I think battery power is needed! So I ordered a spare battery after the delivery I will do the test point method agian. Currently if I plug in my phone thorough usb to my computer the qcom 9008 port shows but while flashing it gets detached then re shows up . And the flashtool error happens. I think a battery power is required so that this failure is happening.
So, what do you think is edl mode requires battery power?.
Need help because I have to fix it. It's my one and only loved phone of all time.
Currently I am using my friends phone to discuss about this matter.....please help me.....
parag2001 said:
Hi, sorry for very late reply
Recently I discovered that the battery is dead not working at all. And while doing the test point method I think battery power is needed! So I ordered a spare battery after the delivery I will do the test point method agian. Currently if I plug in my phone thorough usb to my computer the qcom 9008 port shows but while flashing it gets detached then re shows up . And the flashtool error happens. I think a battery power is required so that this failure is happening.
So, what do you think is edl mode requires battery power?.
Need help because I have to fix it. It's my one and only loved phone of all time.
Currently I am using my friends phone to discuss about this matter.....please help me.....
Click to expand...
Click to collapse
You do not need battery power for test point method.