Hi
I am in need of some help before i lose my mind!!!
i recenly purchased a model ZQ8003 HU that was suposed to be Android 10, after using a couple of diferent apps i have discovered this is actually Android 9.
I have contacted the seller on several occasions over the past few weeks but have had no response.
Is there anyone out there who can point me in the right direction to how i can get Android 10 on this unit ?
heres what i have on the HU...
Related
Hi there.
I have recently bought a Galaxy Note 8.0 off Ebay and the reason why i bought it is because it was cheaper than the high street and i wanted an 8" tablet with good specs; before i bought this tablet i was told it has an EU plug which for me didn't matter at first as the voltage of EU and the UK (where i currently reside) are the same and that updates i feel would be almost similar.
I feel i made the wrong decision in buying this tablet.
Samsung told me that the Note 8.0 "should have" Android 4.3. Mine is still stuck at 4.2.2. I thought of resetting the device but after a few minutes of doing it the screen kept flickering with the Android symbol and a message underneath saying " Downloading. Do not turn off target". At the moment i am waiting for anything to happen and not turning off the device.
What could this mean? Any advice please. Help!!!!
Note 8.0 is officially still Androin 4.2.2
Sent from my GT-N5100 using Tapatalk
I was told by Samsung UK that Android 4.3 is available.
And how about the symptoms i have been experiencing. What could that mean?
Look like you enter download mode by mistake when you try to reset. By pressing vol down+power button. Just cancel and as long as you dont actually download anything it will be back to normal.
No official 4.3 as you can read in this forum
Sent from my GT-N5100 using Tapatalk
*Unable to post on software development due to limited posts*
Hi all, hope your well
My Eonon Ga6153f has been slow since I first got it.
Eonon have sent me numerous update files throughout my warranty period and there after but still no speed improvement
I decided to install a custom 'Malaysk' 5.1 firmware 1024x800 RK3188, this was whilst the car engine was off, it failed multiple times and I found out that the system was looking for a 'dupdate.img' not 'update.img'
So I renamed the file and it was going well however my car battery died during the installation and the head unit just cut off. I believe the head unit is now hard bricked.
All i get now is a black screen. I've tried booting into recovery as advised by eonon by holding reset and power etc.. But no luck. The dvd ejects and the head unit lights do come on when letting go of reset for 1 second but that's it.
I've tried using sd tool to load the stock eonon firmware on it but no luck. I've also had the img file on USB aswell but still nothing when switching the unit on
I've also tried rockchip batch tool by connecting head unit to the computer but rockchip cannot find the device? (Windows 10)
Am I doing something wrong? Any solutions?
I've spoke to eonon and they can't do nothing as I'm out of my warranty period and they are only willing to offer 10% off a brand new unit which still would cost me £280 which I reallly do not want to spending again
I've been driving without a stereo for 2 months now! Boring journeys everyday. Hope someone can help!
(P.s i am based in London, UK if anyone would like to come help me out)
Anyone???
Hello everyone. I’ve got a hizpo Head unit with an inverted screen that I can’t figure out. Funny thing yesterday I plugged the radio in and the screen was good and 30 minutes later I was watching it when it did it but it went inverted again. Does anyone have an answer to this on these forums? Can I update to the latest version of software and firmware and it fix the problem? Where would I find the upgrade? Can windows ce be installed on this Head unit? It’s running Android 7.1.2 right now. The cpu is arm cortex [email protected] 1.6 ghz (X4) the mcu from what I could make of it being inverted is MTCD_XRC_V2.58_1 jul 31 2017 17:35:55. The model on the Head unit itself is AD717009. Any help would be greatly appreciated this thing is driving me nuts.
I think you are on right track when you say mcu. I would contact the seller first and explain issue and they might send you mcu. I had similar issues but not the same with mine.
https://forum.xda-developers.com/an...ad-units/how-figure-density-settings-t3964977
I think you are on right track when you say mcu. I would contact the seller first and explain issue and they might send you mcu. I had similar issues but not the same with mine.
https://forum.xda-developers.com/an...ad-units/how-figure-density-settings-t3964977
My Mate 20 x starts automatically every 4 days.
I send it to the Repair Center they exchanged the mainboard for me.
4 days later it starts again on its own
The problem is only with Emui 10. With Emui 9 or 9.1 this error is not.
Does nobody have problems with Emui 10 and automatic reboots?
I don't know what else I can do.
I don't want to send it back anymore
No mines been running just fine, have to the China version EVR-AL00 running 10.1.0.160.
until Android 10 I never had any problems until after that.
My Mate 30 also runs 10.1.0.150 and no problems.
I already had many Honor / Huawei devices and this is the first one with problems.
letschky said:
until Android 10 I never had any problems until after that.
My Mate 30 also runs 10.1.0.150 and no problems.
I already had many Honor / Huawei devices and this is the first one with problems.
Click to expand...
Click to collapse
Doesn't happens on my L29 also. goes weeks without any restart on emui 10.0
It only gets on my nerves that I have to send it back to the repair center.
I am on Emui 9.1 and nothing when I update to Emui 10 I have the problem again.
I do not understand that
I still have the Mate 30 but it is not the Mate 20x
update:the Mate 20x comes back from the Repair Center.With new Mainboard.After 3 Weeks useing it restart 3 Times again,aahh.I send it back to Huawei Repair Center again.
Huawei should be giving you a brand new phone, plus compensation for being without the faulty one so many times.
There is something there
I sent my Mate 20x back for repair.
The mainboard was exchanged twice.
Now there are problems with the SIM card again - it is often not recognized.
And if it doesn't find a network or the SIM card, it restarts automatically.
It's getting annoying.
What has been exchanged so far is the Mate 20x no longer worth it
My Mate 20x is back from being repaired.(New Battery and new Screen)
But it still doesn't work well.
Still automatic restarts and problems with the SIM card.
I wrote Huawei and now they are exchanging my Mate 20x for a new one.
Since June it has been 3 times in the repair center for a total of 8 weeks.
Hello Everyone,
I had a bad idea to try and upgrade my zlink app in my wife's car with a new version. Of course without backing up the old version . I've since tries installing about 20 versions I found online to no avail, and the seller of the unit I bought (CarNavi on aliexpress is not willing to help). Anyway, I've attached pics of the system info and actually had an old screen shot of the zlink app I am looking to replace, it is a PX6 unit. If anyone has the same head unit and has or can get their apk, I'd totally appreciate it.
Thanks!