Android 11 for Redmi Note 9 - Redmi Note 9 Guides, News, & Discussion

Android 11 for Redmi Note 9 - Redmi Note 9 Guides, News, & Discussion

DISCLAMER!
Follow the instructions shown in this thread at your own risks, I will not be held responsible for bricking your device, you did this yourself.
That said, the information will be kept up to date relatively frequently, and should you follow the steps and ask questions below when unsure, everything will be fine!
No files will be directly provided. Do not use pre-created/re-uploaded content.
Note: This is a GSI (generic system imaging) ROM and the credits go to @eremitein and the link to his thread is below:
[OFFICIAL CAOS GSI]
-----------------------------------------------------------------------------------
The download link to the rom is below:
Click here to download the ROM
----------------------------------------------------------
Here are some requirements to install this ROM on your device.
1. You must have a PC
2. The bootloader of your device must be unlocked. (if you don't know how to unlock the bootloader of your device then the instructions are below.)
3. Your phone's battery must be above 50%
4. You must install this ROM with a clean boot.img. (it is recommended to install this ROM with a clean boot.img, installing this ROM with a patched boot.img can often result in bootlooping/bricking the device.)
-----------------------------------------------
Here's how you can unlock the bootloader of your device.
1.Create a Mi account if you already don't have one.
2. Open up your phone and go into the settings and go into "About phone" then tap on the MIUI version 7 times. (you will unlock the developer options)
3. Now go back from about phone to the settings app and scroll down to "Additional settings" scroll down and you will see "developer options"
4. Open the developer options and turn on "OEM unlocking" and then click on "Mi unlock status" and now turn off the WiFi and turn on your mobile data. Now click on "Add account and device"
5. Go back to the developer options and scroll down and enable "USB debugging"
6. Now go onto your PC and head over to this link (https://en.miui.com/unlock/download_en.html) and download and extract the file that has been downloaded.
7. Go to the exctracted folder, locate and open the .exe file named "miflash_unlock"
8. Login with your Mi account.
9. Connect your device to the PC via a USB cable. (the one that comes in the box is recommended)
10. If the drivers are installed and the device is connected properly then you must see a "Unlock now" option click on it and you will get a 7 days waiting time.
11. After 7 days, try again and if nothing goes wrong your device will be unlocked.
---------------------------------------------------------------------------------------------------------------------------
Now onto installing the ROM:
1. First download and extract this file on your computer SDK Platform tools
2. Download this file and extract it on your computer MIUI 12 ROM download the fastboot file and extract it on your computer.
3. Download the custom ROM and extract it. (the download link is above)
4. Copy and paste the file to the SDK Plaltform tools folder rename the custom ROM file to "system"
5. Copy the vbmeta.img from the MIUI 12 RO folder and paste it in the SDK platform tools folder.
6. Head to your device and power it off, once it is powered off, Hold the volume down button and the power button till the fastboot screen shows up.
7. Now connect the device to your computer and on your computer open the SDK Platform tools folder and make sure that those 2 files are there, "system.img" and "vbmeta.img"
8. Right click and press the shift key at the same time and click on "Open powershell window here"
9. Now in the powershell window, type in the following codes:
Code:
.\fastboot.exe reboot fastboot
.\fastboot.exe --disable-verification flash vbmeta .\vbmeta.img
.\fastboot.exe flash system .\system.img
.\fastboot.exe -w
.\fastboot.exe reboot
-------------------------------------------------------------
If you followed the all steps then your device will be booted up with Android 11.

Nice.
It is MIUI too or AOSP ???

VD171 said:
Nice.
It is MIUI too or AOSP ???
Click to expand...
Click to collapse
AOSP

mirzanuman6612 said:
AOSP
Click to expand...
Click to collapse
Wow... Interesting...
Does it works with TWRP ?
Does it works with all quad camera modes ?
May I install AOSP 10 too or 11 only ?

VD171 said:
Wow... Interesting...
Does it works with TWRP ?
Does it works with all quad camera modes ?
May I install AOSP 10 too or 11 only ?
Click to expand...
Click to collapse
Install the ROM with the link given at the start of the thread. And I recommend installing it through fastboot. And it does not work with all quad camera modes. But I am looking for fixes for it to work with all quad camera modes.

mirzanuman6612 said:
Install the ROM with the link given at the start of the thread. And I recommend installing it through fastboot. And it does not work with all quad camera modes. But I am looking for fixes it to work with all quad camera modes.
Click to expand...
Click to collapse
Very good job, my friend

mirzanuman6612 said:
Install the ROM with the link given at the start of the thread. And I recommend installing it through fastboot. And it does not work with all quad camera modes. But I am looking for fixes for it to work with all quad camera modes.
Click to expand...
Click to collapse
Please work on custom rom for redmi note 9 with twrp

Kunalmore said:
Please work on custom rom for redmi note 9 with twrp
Click to expand...
Click to collapse
Twrp is not very stable at the moment.

mirzanuman6612 said:
Twrp is not very stable at the moment.
Click to expand...
Click to collapse
It is having troubles with FBE (File-Based Encryption).
Sad :-(

Good day does this gsi rom have gapps built in, and if not how do i go about installing gapps.

toussaintjames said:
Good day does this gsi rom have gapps built in, and if not how do i go about installing gapps.
Click to expand...
Click to collapse
It does have gapps built in.

When I'm in fastbootd pc stuck on waiting for any device, pls help

satanslave said:
When I'm in fastbootd pc stuck on waiting for any device, pls help
Click to expand...
Click to collapse
Which windows are you using?

Hi, its really nice that you got it working, but for me it sasys that the partition system does not exists. What should i do?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT: Should i try to flash the super partition with this Image? I think the super partition is the system partition in my miui because its so big.

EinTim23 said:
Hi, its really nice that you got it working, but for me it sasys that the partition system does not exists. What should i do?View attachment 5174251
EDIT: Should i try to flash the super partition with this Image? I think the super partition is the system partition in my miui because its so big.
View attachment 5174253
Click to expand...
Click to collapse
Read. The. Thread. Properly. And input the commands into the powershell window properly and you will be good.

mirzanuman6612 said:
Read. The. Thread. Properly. And input the commands into the powershell window properly and you will be good.
Click to expand...
Click to collapse
Sorry ist was my fault, i forgot to reboot into fastbootd

Hi, i have a question. Is there a way to fix celluar data? Calls and SMS work fine.

EinTim23 said:
Hi, i have a question. Is there a way to fix celluar data? Calls and SMS work fine.
Click to expand...
Click to collapse
The ROM is still in beta version, so some things might not work. Anyways, how are the other things. Is the ROM stable?

mirzanuman6612 said:
The ROM is still in beta version, so some things might not work. Anyways, how are the other things. Is the ROM stable?
Click to expand...
Click to collapse
The Rom works stable for me and everything i tested works except mobile data. IR remote is working fine too.
Edit: the graphics are a bit laggy too.

mirzanuman6612 said:
Twrp is not very stable at the moment.
Click to expand...
Click to collapse
With twrp my device ends up in a blackscreen and only fastboot works then.

Related

[Recovery] [UNOFFICIAL] TWRP 3.2.3-0 Mi Pad 3 (Cappu)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is an updated version of TWRP for Mi Pad 3 (Codename: Cappu). This is the latest update based on TWRP v3.2.1-0 I used TWRP by Multirom and rakomancha's TWRP as base for a working device / twrp tree for our device. I have tested this version for some hours and discovered no errors - but tell me if you find some. If you are looking for a tree for your Mediatek MT8173 / MT8176 device you can use my one as base. You should also have a look at the twrp main-thread for all neccessary changes that need to be made.
DISCLAIMER
This image has only been successfully tested by me at this point.
Please exercise caution and care when attempting to flash anything to your device.
You are completely responsible for any possible issues or damages resultant from undertaking the following procedures.
That being said, this image and method should be safe.
Installation:
Method 1:
1. Open Settings -> About Phone -> tap 5-7 times on Miui Version to activate Developer Options.
2. Open Settings -> Advanced Settings -> Developer Options and activate USB-Debugging.
3. Turn your Tablet off.
4. Extract SP_Driver_V1524.zip on your Windows PC with (7zip) and install drivers.
5. Extract SP_Flash_Tool_exe_Windows_v5.1720.00.000.zip on your Windows PC with (7zip).
6. Download twrp-3.2.3-0-cappu-20180906.img and MT8173_Android_scatter.txt.
7. Open the folder SP_Flash_Tool_v5.1620_WinSP_Flash_Tool_exe_Windows_v5.1720.00.000 and run flash_tool.exe.
8. In SP Flash Tool open the file scatter (MT8173_Android_scatter.txt) with the yellow button on the right (Scatter-loading).
9. Uncheck all boxes, except "Recovery"
10. Press the green (DOWNLOAD) Button. After that plug your usb cable into Mi Pad 3 and wait until SP Flash Tool says FINISH!
11. TRWP was flashed successfully and is now ready to use. Turn the tablet off. Hold Volume(+) and Power Button until you see TWRP Menu.
Method 2:
1. Install Minimal ADB and Fastboot -> https://forum.xda-developers.com/showthread.php?t=2317790
2. Open Settings -> About Phone -> tap 5-7 times on Miui Version to activate Developer Options.
3. Open Settings -> Advanced Settings -> Developer Options and activate USB-Debugging.
4. Turn the tablet off. Hold Volume(-) and Power Button until you see Mi Bunny / Fastboot.
5. Plug your usb cable into your Mi Pad 3.
6. Open cmd window in Windows and browse to Minimal ADB and Fastboot folder.
7. Download twrp-3.2.3-0-cappu-20180906.img and copy to Minimal ADB and Fastboot folder.
8. Type in cmd window: fastboot flash recovery twrp-3.2.3-0-cappu-20180906.img. If successful, reboot and hold Volume(+) and Power Button until you see TWRP.
To get Root access, flash this Latest version of Magisk. You can find the downloads and a guide here.
Downloads:
twrp-3.2.3-0-cappu-20180306.img 2018-09-06 Update: TWRP 3.2.3-0
MT8173_Android_Scatter.txt
SP_Flash_Tool_exe_Windows_v5.1720.00.000.zip
SP_Flash_Tool_v5.1620_Linux_64bit.zip
SP_Driver_V1524.zip
TWRP Tree on Github: https://github.com/Goayandi/android_twrp_xiaomi_cappu

I can't touch display with this TWRP. How can I fix it?

Genie's said:
I can't touch display with this TWRP. How can I fix it?
Click to expand...
Click to collapse
What ROM did you flash TWRP over?
Before flashing TWRP (via Method 2), I first flashed the China Stable ROM V9.2.2.0 found at en.miui.com. Touchscreen worked perfect for me

Genie's said:
I can't touch display with this TWRP. How can I fix it?
Click to expand...
Click to collapse
As alfiean already said you should try to flash China Stable or Developer ROM before you flash TWRP. When I flashed an older version of TWRP on my new Mi Pad 3 I mentioned touch problems, too. After flashing China Dev Rom everything worked fine.

OK, I fixed the touch issue.
By the way, this recovery seems MTP not working.

Genie's said:
OK, I fixed the touch issue.
By the way, this recovery seems MTP not working.
Click to expand...
Click to collapse
Oh, really? Seems like i forgot the flags for MTP. I'll include it in an updated version
Update: twrp-3.2.1-0-cappu-20180306.img - Fixed MTP and added some minor improvements.

Goayandi said:
Oh, really? Seems like i forgot the flags for MTP. I'll include it in an updated version
Update: twrp-3.2.1-0-cappu-20180306.img - Fixed MTP and added some minor improvements.
Click to expand...
Click to collapse
Found a bug:
Unable to flash SuperSU-v2.82-201705271822.zip with the following error:
Code:
- Finding boot image
--- Boot image: not found, aborting
Same for other SU versions.
But with twrp-3.1.0-cappu_b4.img (by multirom.me) I've flashed same SU package successfully without any errors.

Is encryption working?

This isn't working on LATEST MIUI 10 FOR Mi Pad 3. It shows 0 MB. Please help me. It was working. Then i flashed miui 10 and twrp for several times. it isnt working. @Goayandi
latest miui 10 for mi pad 3: http://en.miui.com/thread-3939343-1-1.html

Someone can upload new versions os this recovery

Sorry, I've been working on other projects the last weeks I haven't tried Miui10, yet. But I will have a look on it this weekend

Goayandi said:
Sorry, I've been working on other projects the last weeks I haven't tried Miui10, yet. But I will have a look on it this weekend
Click to expand...
Click to collapse
Thx mate.

Goayandi said:
Sorry, I've been working on other projects the last weeks I haven't tried Miui10, yet. But I will have a look on it this weekend
Click to expand...
Click to collapse
Have you time for take a look ¿?

Hoihoi, some news around ¿?

Nothing ¿?

Method 1:
1. Open Settings -> About Phone -> tap 5-7 times on Miui Version to activate Developer Options.
2. Open Settings -> Advanced Settings -> Developer Options and activate USB-Debugging.
3. Turn your Tablet off.
4. Extract SP_Driver_V1524.zip on your Windows PC with (7zip) and install drivers.
5. Extract SP_Flash_Tool_exe_Windows_v5.1720.00.000.zip on your Windows PC with (7zip).
6. Download twrp-3.2.3-0-cappu-20180906.img and MT8173_Android_scatter.txt.
7. Open the folder SP_Flash_Tool_v5.1620_WinSP_Flash_Tool_exe_Windows_v5.1720.00.000 and run flash_tool.exe.
8. In SP Flash Tool open the file scatter (MT8173_Android_scatter.txt) with the yellow button on the right (Scatter-loading).
9. Uncheck all boxes, except "Recovery"
10. Press the green (DOWNLOAD) Button. After that plug your usb cable into Mi Pad 3 and wait until SP Flash Tool says FINISH!
11. TRWP was flashed successfully and is now ready to use. Turn the tablet off. Hold Volume(+) and Power Button until you see TWRP Menu.
Click to expand...
Click to collapse
At point number 8 of method one I detect this error: the "recovery" box cannot select it. The program does not allow me to select the box recovery.
My OS is Windows 7 Ultimate 64bit

Cannot swipe in TWRP recovery mode
Hi,
I have an issue with this image
twrp-3.2.1-0-cappu-20180306.img
androidfilehost fid=746010030569959472 ( I cannot post the link because I'm a new user)
I go in recovery mode but I'm not able to interact with the screen: a big white lock icon appears in the center and I'm not able to remove it, any idea?
I've also seen that there is an updated version here but there are NO mirrors available!!!
twrp-3.2.3-0-cappu-20180906.img
androidfilehost fid=1322778262903999335 ( I cannot post the link because I'm a new user)
Please, can you help me with this?
1) How can I unlock the screen ?
OR
2) Do you have a functioning link for the updated version?
Thanks!

I installed, teamwin. in my mipad 4 but is written in russian. isn´t it? It is complicate to use it in Russian.

[ROM] [GSI] [GUIDE] Lineage os A10 A105F

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A guide for how to install Lineage OS [ GSI ] on Samsung A10 A105F
Notes / Warning!
Use at your own risk, I’m not responsible for bricking your device.
Make sure to backup your important data before everything.
here is a summary of the steps I am going to show
you in this guide:
1. unlock bootloader
2. flash root file for magisk.
3. install magisk (app)
4. flash TWRP recovery via flashify app
5. install the rom with twrp
6. install gapps
let's get started.
downloads section:
samsung usb drivers:
https://developer.samsung.com/mobile/android-usb-driver.html
odin:
https://odindownload.com/download/#.XopMkXJRWM8
root file:
https://drive.google.com/file/d/1h1mNNppumVbFFTgq_A_XtjeWNsfkvDHH/view
twrp file:
https://www.dropbox.com/s/hkhpom931byup68/twrp-a10-3.3.1-0_afaneh92.tar?dl=1
magisk app:
https://github.com/topjohnwu/Magisk/releases/download/manager-v7.5.1/MagiskManager-v7.5.1.apk
flashify app:
https://www.apkmirror.com/apk/chris...-release/flashify-1-9-2-android-apk-download/
rom:
https://sourceforge.net/projects/andyyan-gsi/files/lineage-16.x/
our device is ARM 32-bit with 64-bit binder, AB so we need to download a64_bvN type.
direct link:
https://sourceforge.net/projects/an...017-UNOFFICIAL-treble_a64_bvN.img.xz/download
gapps:
https://opengapps.org/
choose arm platform android version 9.0
direct link:
https://sourceforge.net/projects/op...se_mirror=netcologne&r=&use_mirror=autoselect
1. unlock bootloader:
Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Enable OEM unlock ( Settings -> Developer options )
How to Enter Download Mode:
Enter Download Mode ( Turn Power off the phone, Press and hold Volume Down + Volume Up keys together then while pressing these keys connecting the phone to PC with USB Cable Data, release all keys when Download Mode appears ).
Unlock Bootloader: In Download Mode you see the long-press Vol Up option to enter Device Unlock Mode. Unlock the bootloader ( that will wipe your device so be sure to backup of your data )
Read the description on the Unlock Bootloader screen then use Volume Up to select “YES” to confirm and “No” to cancel unlock bootloader and restart the phone.
After Bootloader unlock, the phone will reboot and make sure the phone connected to the internet or triggers KG State / RMM State Prenormal.
Setup the phone without google account etc.
The Bootloader are unlocked!
2. flash root file:
enter download mode ( see instructions above here )
flash the file in Odin ( choose PDA, select the file and the start )
3. install magisk:
install magisk.apk (download link above here > and then follow the instructions in the app (the app will ask once for reboot).
now you root!
4. flashing twrp:
install flashify app ( link above )
open the app and accept root permission.
navigate to flash choose recovery image to select the twrp file and then flash.
now you have twrp recovery
5. flash the rom:
move the rom file you downloaded to sdcard (preferred) or to internal storage.
reboot to recovery ( in flashify app you can select reboot recovery )
choose to wipe > format data > type yes and start.
select wipe > advanced wipe > choose :
Dalvik / art cache
cache
data
wipe to wipe.
go to install > install image > nevigate to lineage os file > select > install as system image.
go to wipe > wipe to factory reset.
6. install gapps
move the gapps file you downloaded to internal storage / sdcard
in twrp select install > navigate to gapps file > install > swipe to install.
go to reboot > system > choose do not install (twrp) > the phone will reboot
wallah ! you have installed lineage os on your phone!
Troubleshoot:
when i install the gapps, have error 70!
-> https://forum.xda-developers.com/android/help/fix-error-70-install-gapps-t3311779
oh ****! my phone get bricked !
only download mode with this error:
only official released binaries are allowed to be flashed (etc...) : (
how to fix:
-> download stock firmware
https://www.sammobile.com/samsung/firmware/SM-A105F/
flash with ODIN

i tried in a105m it's functionaly

is it possible to install this build to SM-A105G

how to install gapps ? error 70

thonynn1 said:
how to install gapps ?
Click to expand...
Click to collapse
I edited the post and added instructions.

thonynn1 said:
i tried in a105m it's functionaly
Click to expand...
Click to collapse
nice!
you tried with this guide and worked?
let me know.

TechBoyPH said:
is it possible to install this build to SM-A105G
Click to expand...
Click to collapse
I didn't tried, it should work.
you can try and let us know.
you can always flash stock rom with odin if something get bad.

thewh1teagle said:
nice!
you tried with this guide and worked?
let me know.
Click to expand...
Click to collapse
Yes, but when i install the gapps, have error 70
Edit: i resolved the error with the post https://forum.xda-developers.com/android/help/fix-error-70-install-gapps-t3311779

thonynn1 said:
Yes, but when i install the gapps, have error 70
Edit: i resolved the error with the post https://forum.xda-developers.com/android/help/fix-error-70-install-gapps-t3311779
Click to expand...
Click to collapse
Thanks for sharing.
I added instructions for fix it in troubleshooting.

sm-a105m
After installing root; the phone is not running samsung official software.
And android does not start.
version 64 does not work, only 32.
for install root and twrt use this tutorial: https://forum.xda-developers.com/galaxy-a10/how-to/how-to-root-samsung-galaxy-a10-install-t4074343

panicol2 said:
After installing root; the phone is not running samsung official software.
And android does not start.
version 64 does not work, only 32.
for install root and twrt use this tutorial: https://forum.xda-developers.com/galaxy-a10/how-to/how-to-root-samsung-galaxy-a10-install-t4074343
Click to expand...
Click to collapse
Followed this same root guide and after flashed linage os 17.1 a64_bvN type with recovery. It worked successfully.
Despite not having service ,in the place im in right now, it also works. Both SIM cards work

Thanks a lot guys!
I successfully installed Linage OS 17.1 on my SM-A105FN.
Everything works, except face-unlock and nfc.
But that is fine and I can wait for a future update that might fix it.
Thanks for the tutorial!:laugh::good:

justhack said:
I successfully installed Linage OS 17.1 on my SM-A105FN.
Everything works, except face-unlock and nfc.
But that is fine and I can wait for a future update that might fix it.
Thanks for the tutorial!:laugh::good:
Click to expand...
Click to collapse
How did you do that, Could work on a105m?

waiting for android Q version
I updated my phone via ota to 10.0
I guess cant downgrade use a lower version, or yes?

Mestre Samurai said:
waiting for android Q version
I updated my phone via ota to 10.0
I guess cant downgrade use a lower version, or yes?
Click to expand...
Click to collapse
I think you can, Flashing stock using odin

give me error 20 on gapps

Betrayal92 said:
How did you do that, Could work on a105m?
Click to expand...
Click to collapse
Might work but are you a little tech savvy? Because it's quite a long process and took me a day to complete.
Because of all the bootloops and reflashing and so on.
If it's not an issue I'll be happy to help out

Betrayal92 said:
How did you do that, Could work on a105m?
Click to expand...
Click to collapse
I have made a thread of how to install it and the websites for where to get them. But if you want I'll leave one here because the one i linked in my thread is different.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
(^ is for lineage os 17.1)
---------- Post added at 05:52 PM ---------- Previous post was at 05:48 PM ----------
Mestre Samurai said:
give me error 20 on gapps
Click to expand...
Click to collapse
install correct gsi image or gapps
Samsung Galaxy A10 is arm32 binder64-ab type (even though in the treble check app is says a only)
and make sure you factory reset after flashing rom. and BEFORE installing gapps

mindinguslove said:
Followed this same root guide and after flashed linage os 17.1 a64_bvN type with recovery. It worked successfully.
Despite not having service ,in the place im in right now, it also works. Both SIM cards work
Click to expand...
Click to collapse
Could you pass me the ROM link?

Thank you for the port, awesome job!
In my opinion it needs some improvements, like in sound, we lost quality, and maximum volume in respect to stock one.
Also the notification bar gets a small black bar in the top, stock one was using all the edges.
And maybe a little hand in some animations that runs randomly not smooth.
Apart from that, i think its a really good and stable ROM.
Any ideas in how to safely root, and maybe add it Viper4Android or some audio lib?

[TOOL][OP8P] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)

This is the OnePlus 8 Pro's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.

mauronofrio said:
This is the OnePlus 8 Pro's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Click to expand...
Click to collapse
Awesome thanks for the support.

Guys with this tool you can finally root your device without have to flash the specified patched boot.img. I hope it will help you and i hope you will not break anymore the fingerprint sensor. Enjoy it.

mauronofrio said:
Guys with this tool you can finally root your device without have to flash the specified patched boot.img. I hope it will help you and i hope you will not break anymore the fingerprint sensor. Enjoy it.
Click to expand...
Click to collapse
Would you be so kind to elaborate on that? I broke my fingerprint sensor by using a already patched img.. Kind of lazy mistake. But had the phone for just a day so I send it back and I'll be getting a new one tomorrow.
I would love to root it and retain my FP.

mauronofrio said:
Guys with this tool you can finally root your device without have to flash the specified patched boot.img. I hope it will help you and i hope you will not break anymore the fingerprint sensor. Enjoy it.
Click to expand...
Click to collapse
I would also like to know the steps. I'm looking at the tool and when selecting "Only Root" I can choose Magisk 20.4 from the list. The note in the tool says "or you can use 'Only Root' to root your phone you are already in TWRP mode." But as far as I understand there is no legitimate TWRP for our device yet.

Balthazard said:
Would you be so kind to elaborate on that? I broke my fingerprint sensor by using a already patched img.. Kind of lazy mistake. But had the phone for just a day so I send it back and I'll be getting a new one tomorrow.
I would love to root it and retain my FP.
Click to expand...
Click to collapse
letum00 said:
I would also like to know the steps. I'm looking at the tool and when selecting "Only Root" I can choose Magisk 20.4 from the list. The note in the tool says "or you can use 'Only Root' to root your phone you are already in TWRP mode." But as far as I understand there is no legitimate TWRP for our device yet.
Click to expand...
Click to collapse
So you should go in "recovery flasher and rooter" option, there you have to select the only TWRP available, check if "only boot" is checked, check "root after boot", select magisk 20.4 and click on the button at the bottom of the page. The TWRP will be booted and magisk flashed, and then from TWRP you can manually reboot to system and your device will be correctly rooted.

mauronofrio said:
So you should go in "recovery flasher and rooter" option, there you have to select the only TWRP available, check if "only boot" is checked, check "root after boot", select magisk 20.4 and click on the button at the bottom of the page. The TWRP will be booted and magisk flashed, and then from TWRP you can manually reboot to system and your device will be correctly rooted.
Click to expand...
Click to collapse
Thank you! I will be doing that when I get my phone.
It's actually just using your twrp build but instead of installing it, booting it and using twrp to flash the stable build of Magisk.
Thank you for your hard work!

Is it possible to restore fingerprint with this tool and appropriate files?

t-mizzle said:
Is it possible to restore fingerprint with this tool and appropriate files?
Click to expand...
Click to collapse
If you lost fingerprint, due to Canary Magisk, just switch to stable Magisk, and reinstall the latest update. If you did a local upgrade the file is still in your download folder. Worked fine for me.

spotmark said:
If you lost fingerprint, due to Canary Magisk, just switch to stable Magisk, and reinstall the latest update. If you did a local upgrade the file is still in your download folder. Worked fine for me.
Click to expand...
Click to collapse
I've tried that, it doesn't work for me.

t-mizzle said:
Is it possible to restore fingerprint with this tool and appropriate files?
Click to expand...
Click to collapse
actually no

Gordietm said:
I've tried that, it doesn't work for me.
Click to expand...
Click to collapse
Restore your persist img ..
If you have a backup...

cultofluna said:
Restore your persist img ..
If you have a backup...
Click to expand...
Click to collapse
I don't have one.

This will work on any version of OOS?
Sent from my IN2025 using Tapatalk

czerdrill said:
This will work on any version of OOS?
Sent from my IN2025 using Tapatalk
Click to expand...
Click to collapse
Yes sure

Thank you mauronofrio..!!!!

Has anyone used this tool yet to unlock the bootloader and root their 8 pro?
I just can't be the first one. Lmao!!!!

Is there a Tool to install on a Chromebook/Linux?

mauronofrio said:
So you should go in "recovery flasher and rooter" option, there you have to select the only TWRP available, check if "only boot" is checked, check "root after boot", select magisk 20.4 and click on the button at the bottom of the page. The TWRP will be booted and magisk flashed, and then from TWRP you can manually reboot to system and your device will be correctly rooted.
Click to expand...
Click to collapse
I'm having some trouble, any guidance would be appreciated. I have "only boot" checked and "root after boot" checked, and the phone just boots into TWRP and then hangs there. I've tried closing the command prompt and selecting "root only" but my device isn't showing up in the device list.

Konfuzion said:
I'm having some trouble, any guidance would be appreciated. I have "only boot" checked and "root after boot" checked, and the phone just boots into TWRP and then hangs there. I've tried closing the command prompt and selecting "root only" but my device isn't showing up in the device list.
Click to expand...
Click to collapse
You have some problems with adb

Development [ROM][Android 11][OP9Pro] crDroid v7

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
Pre-installation:
Until TWRP is ready, this version of crDroid comes with prebaked core Gapps
Download LOS recovery
Download Tiny ADB & Fastboot
First time installation (clean flash):
It is recommended to come clean from latest OOS installation
Backup your data to PC, OTG flash drive
Reboot to bootloader (fastboot)
Run fastboot devices to confirm there is connection to the phone
Install LOS recovery with following command fastboot flash boot lineage-18.1-20210615-recovery-lemonadep.img
Power off and reboot to recovery by pressing VOL down + Power from shutdown state
Navigate with volume keys to Factory Reset -> Format data/factory reset and confirm format of data
Go back to main menu and choose Apply update and Apply from ADB
Now adb sideload latest crDroid package with adb sideload crDroid.zip
When asked to confirm flash, do confirm it
Sideload push will go up to 47% and fail - no worry is normal
Reboot to system
Update installation:
Through recovery:
Download latest crDroid zip and reboot to recovery
Choose Apply update and Apply from ADB
Now adb sideload latest crDroid package with adb sideload crDroid.zip
Sideload push will go up to 47% and fail - no worry is normal
Reboot to system
Built-in OTA (slower):
When ready
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sm8350
Download:
ROM https://crdroid.net/lemonadep#crDroid-v7
Changelog: https://crdroid.net/lemonadep#crDroid-v7/changelog
Known issues:
- waiting for more feedback to see
Visit official website @ crDroid.net
crDroid OnePlus 9 Pro Telegram
crDroid Community Telegram
crDroid is built with passion by @neobuddy89 and @gwolfu
If you like our work, do consider a donation to support further device development
ROM OS Version: Android 11
ROM Kernel: Linux 5.4

Awesome.

I have the Tmobile version of OP9pro. Will I need to flash the tmobile modem.img?

burtonlax said:
I have the Tmobile version of OP9pro. Will I need to flash the tmobile modem.img?
Click to expand...
Click to collapse
Testing of this rom has been done on the EU variant
I am not sure how Tmobile version works, but rom side, is same as on LOS

gwolfu said:
Testing of this rom has been done on the EU variant
I am not sure how Tmobile version works, but rom side, is same as on LOS
Click to expand...
Click to collapse
it's best to go global first coming from tmo. No, as long as you don't do an ota on Global. so flash global then boot, then flash custom rom(following their guide).
If u lose service modem is provided (Just unzip) Bootloader fastboot command "fastboot flash modem modem.img
This of course is assuming u got unlock.bin and unlocked Bootloader

Here we go!
Welcome @gwolfu
Hopefully we don't need 11.2.7.7?? It's not out here in EU yet, what's the reason most of the custom roms seem to want the EU build by the way?

CRDroid, fantastic to see this here my favorite ROM since the days of my LG G3! Can't wait to try this out, will sadly be waiting till TWRP tho as I'd prefer to avaoid gapps. Unless there is any chance of a non gapps build also? Cheeky....!

I'll flash and report tomorrow .
post logs through here or telegram?

ryantf420 said:
I'll flash and report tomorrow .
post logs through here or telegram?
Click to expand...
Click to collapse
preferably here as to better keep track of stuff

I know it may not be recommended, but has anyone been able to flash this without using a computer?

phr0zen said:
I know it may not be recommended, but has anyone been able to flash this without using a computer?
Click to expand...
Click to collapse
Since the instructions specify using fastboot (as well as sideloading the rom), that's not possible.

phr0zen said:
I know it may not be recommended, but has anyone been able to flash this without using a computer?
Click to expand...
Click to collapse
without TWRP, not possible

TWRP is death.

This is awesome news brother

So I've been out of the root and rom flashing game for a bit, got it side loaded and everything my issue is i cant get root permissions working wasn't sure how i go about setting it up since all i have worked with on the one plus is magisk and having to install to a .img and input on how to get it working?

crazyvash1 said:
So I've been out of the root and rom flashing game for a bit, got it side loaded and everything my issue is i cant get root permissions working wasn't sure how i go about setting it up since all i have worked with on the one plus is magisk and having to install to a .img and input on how to get it working?
Click to expand...
Click to collapse
extract crdroid.zip content
extract boot.img from payload.bin file using payload dumper
install magisk apk on phone as any other apk (I know we are not rooted yet)
copy boot.img to internal phone storage
open magisk and click on top install button
choose "select and patch a file"
select the boot.img from internal storage
after done, copy magisk patched boot image from Download folder on phone storage, to PC
now on PC, reboot to bootloader and run
Code:
fastboot flash boot magisk_patched-23000_xxxxx.img
check file name to match xxxxx = random generated text
reboot to system and enjoy

gwolfu said:
extract crdroid.zip content
extract boot.img from payload.bin file using payload dumper
install magisk apk on phone as any other apk (I know we are not rooted yet)
copy boot.img to internal phone storage
open magisk and click on top install button
choose "select and patch a file"
select the boot.img from internal storage
after done, copy magisk patched boot image from Download folder on phone storage, to PC
now on PC, reboot to bootloader and run
Code:
fastboot flash boot magisk_patched-23000_xxxxx.img
check file name to match xxxxx = random generated text
reboot to system and enjoy
Click to expand...
Click to collapse
Think you missed the last step to use Magisk again to root the installed boot image?

djsubterrain said:
Think you missed the last step to use Magisk again to root the installed boot image?
Click to expand...
Click to collapse
Not need
I used fastboot flash not fastboot boot so boot is already patched
No temp boot and patch after

gwolfu said:
Not need
I used fastboot flash not fastboot boot so boot is already patched
No temp boot and patch after
Click to expand...
Click to collapse
Didn't notice that, totally right. Sorry.

truly have found nothing broken
except power menu settings only work in crdroid Settings not in System>Gestures>power menu...
Great job

How To Guide Simplified guide on how to unlock RMX336X bootloader, flash LineageOS and get root privileges

I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE YOUR WARRANTY MAY BE VOID AFTER THIS PROCEDURE
UPDATED 06/04/23
You are now on your way to degoogle your Realme GT Master edition!
1. Figuring out your device model
This guide was tested on the RMX3363 with LineageOS built for RMX3360
Click to expand...
Click to collapse
2. Now let's figure out what you need to download:
Deep testing app (this can be found on the realme forums, some versions may not work)
Click to expand...
Click to collapse
ADB/Fastboot (always download from the official site/repo) [15 seconds ADB installer]
Click to expand...
Click to collapse
Magisk apk 25.2 (always download from the official site/repo) [github repo]
Click to expand...
Click to collapse
Your custom ROM, i recommend using LineageOS
LineageOS lunaa build [pjgowtham releases]
Click to expand...
Click to collapse
LineageOS recovery [you must use THIS recovery if you are installing the "lunaa" build]
Click to expand...
Click to collapse
3. Now you need to
enable Developer options (clicking build number multiple times)
Click to expand...
Click to collapse
enable USB Debugging
Click to expand...
Click to collapse
enable OEM Unlocking in developer options
Click to expand...
Click to collapse
4. Let's start!
Plug your phone into your pc usb
Click to expand...
Click to collapse
Install and launch the Deep test apk
Click to expand...
Click to collapse
Restart into fastboot mode (fastboot reboot bootloader)
Click to expand...
Click to collapse
Now from the pc side
Code:
fastboot devices
Code:
fastboot flashing unlock
In the fastboot menu you will be prompted with 2 selections:
DO NOT UNLOCK THE BOOTLOADER
UNLOCK THE BOOTLOADER
Navigate to "unlock the bootloader" with volume buttons and confirm with power button
YOUR DEVICE DATA WILL BE WIPED
Now your device bootloader is unlocked!
Q: How can i check if my bootloader is unlocked?
A: Go into developer settings and find the "OEM Unlock" slider, it should be locked to the right
5. Custom ROM
Restart into fastboot
Click to expand...
Click to collapse
Run code:
Code:
fastboot devices
Code:
fastboot flash boot_a recovery.img
Code:
fastboot flash boot_b recovery.img
Restart into recovery
Click to expand...
Click to collapse
Launch ADB sideload ("Apply update" then "Apply from ADB")
Click to expand...
Click to collapse
Run code
Code:
adb sideload <rom name>.zip
After the sideload you can start using your phone normally, or:
6. Patch your custom ROM with Magisk
CAN SKIP IF YOU DO NOT WANT ROOT PRIVILEGES
Extract boot.img from you custom ROM
Click to expand...
Click to collapse
How do you do this?
Use the LineageOS extractor [github]
Click to expand...
Click to collapse
Run code:
Code:
py extract.py <rom name>.zip
Find "boot.img" in the "output" folder and patch with Magisk (if you use the .apk you have to push the file on an android device, install magisk on it and then pull it back to your pc)
Click to expand...
Click to collapse
Code:
fastboot flash boot_(a/b) patched-boot.img
Now you have root privileges!

Congratulations, maikuITA! Your simplified guide on how to unlock the RMX336X bootloader is very helpful to the community. Your effort to make the process easier for users is truly appreciated. Keep up the great work!

Great basic tutorial Thanks...But here help me out please I already unlocked bootloader and installed custom rom (pixelplus ui), now just want to have root so how to do it?
after extracting pixel plus ui and payload dumper for my device I got no recovery img instead I got this files..image below :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so like what to patch and flash?

ASIFPIAL said:
Great basic tutorial Thanks...But here help me out please I already unlocked bootloader and installed custom rom (pixelplus ui), now just want to have root so how to do it?
after extracting pixel plus ui and payload dumper for my device I got no recovery img instead I got this files..image below :
View attachment 5878259
so like what to patch and flash?
Click to expand...
Click to collapse
You need to patch with Magisk and then flash back boot.img and vendor_boot.img

maikuITA said:
You need to patch with Magisk and then flash back boot.img and vendor_boot.img
Click to expand...
Click to collapse
Patching and flashing only boot.img worked

ASIFPIAL said:
Patching and flashing only boot.img worked
Click to expand...
Click to collapse
It's fine, it was only boot.img for my RMX

After downloading recovery tool i got few files instand of only recovery.img can u help me what i need to flash from this

If you have installed LOS recovery, to have root privileges that's easier to change Magisk extension from apk to zip and flash it by adb sideload, no need to extract boot.img.

enonaw said:
If you have installed LOS recovery, to have root privileges that's easier to change Magisk extension from apk to zip and flash it by adb sideload, no need to extract boot.img.
Click to expand...
Click to collapse
I got recovery tool in zip dont in img file where u have boot.img and few others

KSTT03 said:
I got recovery tool in zip dont in img file where u have boot.img and few others
Click to expand...
Click to collapse
Where did you get LOS recovery zip ? You have .img files into it and a script with commands : it couldn't be easier.
LOS recovery : here
And why did you quote me because I was talking about Magisk to get root, which has nothing to do with recovery ?

i cant find any working deep test apk. can someone provide me a link or anything?

ajamboboy said:
i cant find any working deep test apk. can someone provide me a link or anything?
Click to expand...
Click to collapse
If you are on RUI4

enonaw said:
If you are on RUI4
Click to expand...
Click to collapse
thanks will try

Hello,
After trying the step 5, my phone broke.
This is the command I typed in adb :
So, I used the flash.bat in the lunaa recovery. All seems fine but now my phone is in the Fastboot mode page where I can choose between : START, Restart bootloader, Recovery mode, Show barcode, Power off.
If I choose "start", restart bootloader, recovery mode, I just return on the same screen. Can't find my phone in adb window.
What should I do ?
Thanks
Restored to stock rom by following those lines : https://forum.xda-developers.com/t/...360-unlcoked-only-access-to-fastboot.4479597/
Will try LOS recovery tomorrow.

Worked on 2nd try. Got an "cannot read" error when I had to sideload lineage ROM, I just needed to use Large Adress Aware to patch "adb.exe".

Any one who use Los can you post you screen on time
I hate this phone everything is good but software is bad rui 4 battery life less than 4 hours on normal use thats not acceptable before i was getting 6-7 hours normally

sym_m said:
Any one who use Los can you post you screen on time
I hate this phone everything is good but software is bad rui 4 battery life less than 4 hours on normal use thats not acceptable before i was getting 6-7 hours normally
Click to expand...
Click to collapse
(Edited : statistics removed because under calculation)

enonaw said:
(This corresponds to the reality for me with LOS 20230415, I never managed to discharge my battery completely in 1 day. PS : no games)
View attachment 5904443
Click to expand...
Click to collapse
Its less than expected u cant use lower frimware? The rui frimware was the best in terms of battery life

sym_m said:
Its less than expected u cant use lower frimware? The rui frimware was the best in terms of battery life
Click to expand...
Click to collapse
LOS uses the RUI firmware. But I admit that I had more autonomy with LOS CXX (RUI3) firmware than with LOS FXX (RUI4) firmware.
I also noticed that the battery discharges quickly when using on the move (changing 5G/4G/3G antennas). Less when the network is fixed. And the 5G network is the least consuming (faster data exchange so less used chip ?)
You can try to do a calibration :
*undisturbed

Don't trust the estimated data I posted, I had just installed the app and the range is increasing. I'll give you some numbers after the weekend.

Develop Bugs

welcome