[ROM] [GSI] [GUIDE] Lineage os A10 A105F - Samsung Galaxy A10 Guides, News, & Discussion

[ROM] [GSI] [GUIDE] Lineage os A10 A105F - Samsung Galaxy A10 Guides, News, & Discussion

i tried in a105m it's functionaly

is it possible to install this build to SM-A105G

how to install gapps ? error 70

thonynn1 said:
how to install gapps ?
Click to expand...
Click to collapse
I edited the post and added instructions.

thonynn1 said:
i tried in a105m it's functionaly
Click to expand...
Click to collapse
nice!
you tried with this guide and worked?
let me know.

TechBoyPH said:
is it possible to install this build to SM-A105G
Click to expand...
Click to collapse
I didn't tried, it should work.
you can try and let us know.
you can always flash stock rom with odin if something get bad.

thewh1teagle said:
nice!
you tried with this guide and worked?
let me know.
Click to expand...
Click to collapse
Yes, but when i install the gapps, have error 70
Edit: i resolved the error with the post https://forum.xda-developers.com/android/help/fix-error-70-install-gapps-t3311779

thonynn1 said:
Yes, but when i install the gapps, have error 70
Edit: i resolved the error with the post https://forum.xda-developers.com/android/help/fix-error-70-install-gapps-t3311779
Click to expand...
Click to collapse
Thanks for sharing.
I added instructions for fix it in troubleshooting.

sm-a105m
After installing root; the phone is not running samsung official software.
And android does not start.
version 64 does not work, only 32.
for install root and twrt use this tutorial: https://forum.xda-developers.com/galaxy-a10/how-to/how-to-root-samsung-galaxy-a10-install-t4074343

panicol2 said:
After installing root; the phone is not running samsung official software.
And android does not start.
version 64 does not work, only 32.
for install root and twrt use this tutorial: https://forum.xda-developers.com/galaxy-a10/how-to/how-to-root-samsung-galaxy-a10-install-t4074343
Click to expand...
Click to collapse
Followed this same root guide and after flashed linage os 17.1 a64_bvN type with recovery. It worked successfully.
Despite not having service ,in the place im in right now, it also works. Both SIM cards work

Thanks a lot guys!
I successfully installed Linage OS 17.1 on my SM-A105FN.
Everything works, except face-unlock and nfc.
But that is fine and I can wait for a future update that might fix it.
Thanks for the tutorial!:laugh::good:

justhack said:
I successfully installed Linage OS 17.1 on my SM-A105FN.
Everything works, except face-unlock and nfc.
But that is fine and I can wait for a future update that might fix it.
Thanks for the tutorial!:laugh::good:
Click to expand...
Click to collapse
How did you do that, Could work on a105m?

waiting for android Q version
I updated my phone via ota to 10.0
I guess cant downgrade use a lower version, or yes?

Mestre Samurai said:
waiting for android Q version
I updated my phone via ota to 10.0
I guess cant downgrade use a lower version, or yes?
Click to expand...
Click to collapse
I think you can, Flashing stock using odin

give me error 20 on gapps

Betrayal92 said:
How did you do that, Could work on a105m?
Click to expand...
Click to collapse
Might work but are you a little tech savvy? Because it's quite a long process and took me a day to complete.
Because of all the bootloops and reflashing and so on.
If it's not an issue I'll be happy to help out

Betrayal92 said:
How did you do that, Could work on a105m?
Click to expand...
Click to collapse
I have made a thread of how to install it and the websites for where to get them. But if you want I'll leave one here because the one i linked in my thread is different.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
(^ is for lineage os 17.1)
---------- Post added at 05:52 PM ---------- Previous post was at 05:48 PM ----------
Mestre Samurai said:
give me error 20 on gapps
Click to expand...
Click to collapse
install correct gsi image or gapps
Samsung Galaxy A10 is arm32 binder64-ab type (even though in the treble check app is says a only)
and make sure you factory reset after flashing rom. and BEFORE installing gapps

mindinguslove said:
Followed this same root guide and after flashed linage os 17.1 a64_bvN type with recovery. It worked successfully.
Despite not having service ,in the place im in right now, it also works. Both SIM cards work
Click to expand...
Click to collapse
Could you pass me the ROM link?

Thank you for the port, awesome job!
In my opinion it needs some improvements, like in sound, we lost quality, and maximum volume in respect to stock one.
Also the notification bar gets a small black bar in the top, stock one was using all the edges.
And maybe a little hand in some animations that runs randomly not smooth.
Apart from that, i think its a really good and stable ROM.
Any ideas in how to safely root, and maybe add it Viper4Android or some audio lib?

Related

[GUIDE] Lolipop + root + xposed framework (option) for C6502 [LB/UB]

My English not realy good so i will try my best.
if you alredy Unlocked bootloader and using Lolipop just follow this guide to root
http://forum.xda-developers.com/xperia-zl/general/root-easy-to-root-zl-lollipop-t3115407
if u wanna using xposed too, download xposed-sdk21-arm-20150430.zip (maybe update in future) follow underline link then flash it like the way Flash SuperSu.zip, after power on install XposedInstaller_3.0-alpha2.apk to manager xposed
http://forum.xda-developers.com/showthread.php?t=3034811
This method for who still locked bootloader, ofcorse unlocked bootloader can do it too but i recomment using flashtool for faster
Dowload
dl1 - flashtool http://www.flashtool.net/downloads.php
dl2 - if you are using kitkat (4.4.4) and not rooted down load 230 kernel version (it only 8MB)
if you already at Lolipop (5.0.2) and want downgrade to able to install xposed, you must down load full rom for C6502 from here http://forum.xda-developers.com/showthread.php?t=2759640 (No need download this if you are using Kikat 4.4)dl3 - recovery (no need if you already rooted and installed recovery) http://nut.xperia-files.com/?ql=fecb25893fe92b03904bb4d99596fbb5a0332e84
dl4 - Pre-rooted Lolipop rom, this rom i created by my own and i using it (C6502 10.6.A.0.454 Generic US) https://drive.google.com/file/d/0B5yIIYx6CgloVDBMamZwZjJQdzg/view?usp=sharing
you can create by yourself follow this giude (just use ftf and superSU, dont use recovery to cause loopboot) http://forum.xda-developers.com/xperia-zl/general/guide-root-xperia-zl-5-0-2-t3115227dl5 -(option) xposed framework for Lolipop, dowload both XposedInstaller_3.0-alpha2.apk and xposed-sdk21-arm-20150430.zip from here http://forum.xda-developers.com/showthread.php?t=3034811Lets begin
1- Flash kitkat rom (skip if you rooted)
install fashtool to pc and flash rom you got from dl2
How to Install and Use Sony Flashtool on Xperia Devices
if pc didnt recognize the phone mean you miss out driver, just install sony pc companion to solve
2- root (skip if you are rooted)
- power on phone -> setting -> about phone -> press Build nuber 7 times then press back -> Developer option -> check USB debugging
- open flashtool (may be wait few minutes), connect phone to pc via calbe, wait few minutes then pess root
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(i already rooted so it gray, if not rooted it become black), choose SupperSU, wait until it sad and press button "make in rain" on your phone -> auto reboot -> done
keep phone connect to pc
3- recovery (skip if you are installed recovery)
- unrar recovery tool from dl3, run install.bat -> press 1 (if you choose SuperSU when root) ->press Enter -> wait -> auto reboot.
noitce: When install recovery keep noitice the phone it will ask the the root permision for adb shell and usb debug permission for pc, just allow all if it asked, if you missed just run install.bat again and allow it. affer reboot it will automatic enter recovery mode, just choose reboot to power on the phone.
4 - Prepare
copy Lolipop rom from dl4 and xposed framework from dl5 (option if you wanna install xposed framework) to Internal Storage phone (dont use memory card). you can accsess it via Computer -> sony ZL -> Internal Storage
5 - flash rom via recovery
- on the phone open the app with red evil icon (so sorry, i forgot it name), allow root permission, my option is check PhilZ recovery (defaul is TWRP) then choose "reboot in to primer recovery"
- in recovery mode, choose wipe cache, wipe data, wipe dalvik-cache, factory reset. then choose install zip (2nd line option) -> zip from sdcard (1st line option) scroll to choose flashable.zip which you just copy into phone -> comfirm -> wait few minutes untill it done. (do not reboot right now if u wanna install xposed framework or you must start over from step 1)
- option for xposed rame work (skip if you not interesting), choose install zip ( 2nd line option) -> zip from sdcard (1st line option) scroll to choose xposed-sdk21-arm-20150430.zip comfirm -> wait few seconds untill it done
- choose reboot system now, first time it can take 5 or up to 10mins to complete boot, just relax.
- option for xposed frame work, after power on install XposedInstaller_3.0-alpha2.apk to manager.

very good work. It works well root!!!
Xposed but does not allow the installation of the framework. He says " installation is only possible manually via recovery for now"
How to install modules xposed???

.283 firmware
Hi, simple question, my phone is c6502 with. 283 firmware existenz rom, is this a problem or not?
Thanks.

miangelgabriel said:
very good work. It works well root!!!
Xposed but does not allow the installation of the framework. He says " installation is only possible manually via recovery for now"
How to install modules xposed???
Click to expand...
Click to collapse
i already said at step 5, if you reboot right after flash rom then you cant flash xposed anymore. and righ now no recovery for ZL at Lolipop.
in my case, i must start over from step 1 dowgrade it to kitkat to able install recovery. right after flash rom do not reboot, keep flash xposed (xposed-sdk21-arm-20150430.zip) like the way you flash rom then it will done.
Hakkinen3K said:
Hi, simple question, my phone is c6502 with. 283 firmware existenz rom, is this a problem or not?
Thanks.
Click to expand...
Click to collapse
No, but you must root your phone to install recovery, as i know there are no way to root 283 and 292 unless you must flash lower kernel version.
if you rooted or you can find the way to root by yourself so skip step 1 and 2,
if not rooted, so read again dl2 (i already fixed )
it only 8MB then you dont need download full rom about 1GB and start from step 1

anhbv said:
i already said at step 5, if you reboot right after flash rom then you cant flash xposed anymore. and righ now no recovery for ZL at Lolipop.
in my case, i must start over from step 1 dowgrade it to kitkat to able install recovery. right after flash rom do not reboot, keep flash xposed (xposed-sdk21-arm-20150430.zip) like the way you flash rom then it will done.
Click to expand...
Click to collapse
Sorry Bro. I did the steps one by one, as you indicate above. The result is the same, not the framework is installed xposed.-

miangelgabriel said:
Sorry Bro. I did the steps one by one, as you indicate above. The result is the same, not the framework is installed xposed.-
Click to expand...
Click to collapse
if you flash xposed-sdk21-arm-20150430.zip successful but you cant see anything until you reboot phone and install XposedInstaller_3.0-alpha2.apk then open xposed installer and check column "active", if it have 2 number line that mean you are succseeful.

everything working perfectly. I come from the rom existenz and could root and run Xposed. Thanks

anhbv said:
My English not realy good so i will try my best.
if you alredy Unlocked bootloader and using Lolipop just follow this guide to root
http://forum.xda-developers.com/xperia-zl/general/root-easy-to-root-zl-lollipop-t3115407
if u wanna using xposed too, download xposed-sdk21-arm-20150430.zip (maybe update in future) follow underline link then flash it like the way Flash SuperSu.zip, after power on install XposedInstaller_3.0-alpha2.apk to manager xposed
http://forum.xda-developers.com/showthread.php?t=3034811
- option for xposed frame work, after power on install XposedInstaller_3.0-alpha2.apk to manager.[/INDENT][/INDENT]
Click to expand...
Click to collapse
Thanks but I want recovery can run on Lolipop to backup and restore ROM. I using Rom lolipop rooted.

Cant make calls
After i dial someones no. from the dialer app.
The phone reboots ,i.e after i flashed the xposed.zip and viper4android.zip files
I dont know why it is
http://forum.xda-developers.com/showthread.php?p=56964275#post56964275
this zip file

nvtan2306 said:
Thanks but I want recovery can run on Lolipop to backup and restore ROM. I using Rom lolipop rooted.
Click to expand...
Click to collapse
sadly there are no recovery for zl lolipop right now, we must wait...
fjvaz1995 said:
After i dial someones no. from the dialer app.
The phone reboots ,i.e after i flashed the xposed.zip and viper4android.zip files
I dont know why it is
http://forum.xda-developers.com/showthread.php?p=56964275#post56964275
this zip file
Click to expand...
Click to collapse
maybe viper4android cause to it... did you try not flash it?

when I go to decompress pre android root, it tells me that the file is damaged,i download two times

thanks
this is the easiest way to got rooted lollipop
just download the prerooted zip file, since i use rooted kitkat and dual recovery installed
xposed framework work fine too

No need unzip? I have to only copy the zip in the Phone?

alexfire20 said:
No need unzip? I have to only copy the zip in the Phone?
Click to expand...
Click to collapse
lol..of course you don't have to
simply copy the zip file to internal phone memory
then flash it via your dual recovery, if you have already installed
read the tutorial at 1st page carefully
and you'll be fine
sorry my bad english

hi there....
Currently my ZL is running on KK 4.4.2, rooted, dual recovery and xposed framework already installed. Can I directly use this method to upgrade to Lollipop or I have to upgrade it to KK 4.4.4 first?

[STOCK] D851 30D KDZ + Flashable ZIPs + All IMGs (Marshmallow!!)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
T-Mobile LG G3 D851 30D
This thread covers various methods of installing both stock and stock rooted Marshmallow 6.0 30D onto the T-Mobile LG G3 D851.
Information:
30D is the first official Marshmallow Android 6 update for the T-Mobile LG G3.
It was first released in KDZ form the morning of April 27 2016.
Official update methods include both an OTA update from 20G to 30D and a KDZ update through the LG Mobile Support Tool.
The bootloader is still unlocked with no sort of OEM Unlock toggle. Still no bootloader/fastboot mode.
Kingroot can temp-root 30D! At least 1 Marshmallow build will always have root. Not very secure... but good for modders.
Android Version: 6.0
Android security patch level: 2016-04-01
Baseband version: MPSS.DI.2.0.1.c1.13-00114-M8974AAAAANPZM-1.43646.2
Kernel version: 3.4.0
Build number: MRA58K
Software version D85130d
Security software version: MDF v1.1 Release 2
Install Directions:
OTA:
When the software update is available, the update icon will display in the status bar at the top of the screen.
Swipe down from the top and tap the notification.
Restart & Install
Note: If prompted, connect to a Wi-Fi network to download the software update.
Your device will restart to perform the update.
When the update is complete, your phone will restart and transition through a series of alerts stating "Android is upgrading".
Once your phone has powered on you will be notified that the software update successfully installed. Tap "OK" to close the notification.
Troubleshooting
If you have not been notified of an available software update, you can manually check if one is available.
From the Home Screen, tap Apps > Settings > General Tab > About phone
System updates > Check now to manually check for a new update.
You will be prompted if a new software update is available.
LG Mobile Flash Tool:
Click here to download the LG Mobile Support Tool to your computer, then open.
Connect your phone to your PC.
Tap Start Upgrade within the LG Mobile Support Tool to begin.
Device will progress through Analysis, Download, Update and Complete during the update process.
While updating, the device will power off and enter a download mode at 5% completion. This is normal. DO NOT DISCONNECT THE USB CABLE!
At approx 95% of completion, the device will power on. This may take several minutes. This is normal. DO NOT DISCONNECT THE USB CABLE!
If your software update stops before it has completed, please do not close the update tool and try the update again. Additional troubleshooting steps are below.
The tool will notify you when the update is complete. Tap Exit to return to the main screen.
Wait for device to power on. Once powered on, the device will reconnect to the LG Mobile Support Tool. When connected, observe that the version number reflects the latest Software D85110r. It is now OK to DISCONNECT THE USB CABLE.
Troubleshooting
If the phone software upgrade stopped before completion, please do not close the update tool and try to update again following original instructions.
If you already closed the update tool, and the phone will not turn on normally, please follow the steps below:
Remove back cover and battery.
Record IMEI/ESN/MEID from device label in battery well.
Replace battery and back cover.
Open LG Mobile Support Tool.
Connect the device to PC via USB cable.
From the drop down menu, select Options > Upgrade Recovery.
Enter your phone information and tap OK
After checking the phone information, it will start to update automatically. If it does not work, the device may require service to attempt recovery.
TWRP + Flashable-ZIPs:
These directions should be used by anyone who already has TWRP installed on their D851.
I used the latest TWRP 3.0 build @ https://dl.twrp.me/d851/
Don't want root? Then it's probably easiest to just flash the stock KDZ using LGUP.. or just skip the SuperSu steps.
1. Download the following 3 files and place them on the internal or external sdcard:
a. LG-D85130D-Flashable.COMPLETE.zip
b. LG-D85130D-Flashable.Boot-AUTOREPACK.zip
c. SuperSU 2.65 or higher. [STABLE] or [BETA] Thanks to Chainfire!2. (re)Boot into TWRP if not there already.
3.* Backup current partitions: boot, system, data, efs (backing up anything is optional but suggested)
4.* Up to you if you want to wipe data (TWRP > Wipe > Swipe slider) but not needed if coming from a stock rom.
5. Install the 3 zip files you put on your sdcard, 1 at a time:
a. LG-D85130D-Flashable.COMPLETE.zip (Install > select zip > swipe to confirm/flash)
b. LG-D85130D-Flashable.Boot-AUTOREPACK.zip (Install > select zip > swipe to confirm/flash)
c. SuperSU zip (Install > select zip > swipe to confirm/flash)
After zips finish flashing you can reboot! If TWRP asks if you want to install SU, hit no. If TWRP says No OS installed, ignore it.
Alternatively, if you are already on 30D already without root and want root/TWRP you can use Kingroot.
Click the button below to display how-to steps...
1. Download the latest Kingroot APK here.
2. Install Kingroot and get temproot with it.
3. Download TWRP @ https://dl.twrp.me/d851/ and download LG-D85130D-Flashable.Boot-AUTOREPACK.zip linked below.
4. Enable USB Debugging on your D851 and connect your device to the computer and run the following commands to install TWRP.
Code:
adb push LG-D85130D-Flashable.Boot-AUTOREPACK.zip /sdcard/
adb push twrp-3.0.0-0-d851.img /sdcard/
adb shell
su
dd if=/sdcard/twrp-3.0.0-0-d851.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
reboot recovery
[if no computer]
d/l TWRP n Boo Repack onto phone n move it to root of internal storage.
Run the su, dd and reboot commands above in terminal emulator.
5.* Backup current partitions: boot, system, data, efs (backing up anything is optional but suggested)
6.* Up to you if you want to wipe data (TWRP > Wipe > Swipe slider) but not needed if coming from a stock rom.
7. Install the 2 zip files you put on your sdcard, 1 at a time:
a. LG-D85130D-Flashable.Boot-AUTOREPACK.zip (Install > select zip > swipe to confirm/flash)
b. SuperSU zip (Install > select zip > swipe to confirm/flash)
Downloads:
Please do not mirror my files!
LG-D85130D-Flashable.COMPLETE.zip
100% stock untouched system, boot, modem and bootloader. Recovery is not included so you don't lose TWRP.
LG-D85130D-Flashable.Modem.zip
This is a flashable stock 30D modem.
LG-D85130D-Flashable.Boot.zip
This is a flashable stock 30D boot.img. Boot.img contains kernel + dtb + ramdisk.
LG-D85130D-Flashable.Boot-AUTOREPACK.zip
This is a repacked boot.img to work properly when flashing SuperSu in TWRP.
LG-D85130D-Flashable.Bootloader.zip
This is a flashable stock 30D bootloader. It contains aboot, dbi, factory, laf, rpm, sbl1 and tz.
Also, KDZ + all stock images for 30D are available in the link below...
CODEFIRE DIRECTORY
30D KDZ Mirror Here
MD5 Sums:
Click button below to view MD5 for each file...
MD5 (aboot.img) = 3a984c57cea36f8356f5068cc7cdd4b4
MD5 (boot.img) = 98bfe8aaeb7e169d78ad249b5c362214
MD5 (dbi.img) = 1a78fd7454f7d0a6fa1bc71aa15c12e8
MD5 (factory.img) = 794327b47c4f1cd503591d804ab2a458
MD5 (laf.img) = 1e5971ef828b0d6afdfa4690efa26308
MD5 (modem.img) = 3969d7e27ffb83b5873c0ac9c796ea1d
MD5 (persist.img) = 039a73fb1b36df8cab1c0861cdea6bf3
MD5 (recovery.img) = 339bd050ddfac269f5c1c7ee36217df3
MD5 (rpm.img) = e9d136d6a7fcdd3726696a111f4b8f8e
MD5 (sbl1.img) = c4ec620062aaa2f7ebafa67c43218665
MD5 (system.img) = f22c8366fab71f65f5f50c7e8eaaa1cd
MD5 (tz.img) = 36a7d694d17f0f8183c0afb825dc9512
MD5 (LG-D85130D-Flashable.Boot-AUTOREPACK.zip) = f7f9507a81333f0a4e8a16033018e8b9
MD5 (LG-D85130D-Flashable.Boot.zip) = ffba4ffc1842c65b1f1defc2dc103330
MD5 (LG-D85130D-Flashable.Bootloader.zip) = cf37b49ab3b85eba9d0d43c5927d215d
MD5 (LG-D85130D-Flashable.COMPLETE.zip) = d2cbb2c8675bf0adc412b760c05ceb29
MD5 (LG-D85130D-Flashable.Modem.zip) = 87b50d33e7b0fba62847a2792648a310
MD5 (D85130d_00_0404.kdz) = a3d04df6fa1e964bd10b5e2ae59041ae
DISCUSSION THREAD:
Take all your nonsense to the marshmallow general thread here - http://forum.xda-developers.com/tmo...-t-mobile-lg-g3-d851-30d-marshmallow-t3367030
Click to expand...
Click to collapse
y u quote OP?
Follow me on twitter for future updates on LG-related things - twitter.com/@utoprime
Find this thread helpful? Hit the Thanks button!
Feeling extra generous? Click my name at the top of any post and hit donate or click here.
#TEAMCODEFIRE

Looks like name on your hosting site for the repacked boot was named wrong.
Actual file: http://downloads.codefi.re/autoprim...s/30D/LG-D85130D-Flashable.Boot-AUTORPACK.zip

mjoecarroll said:
Looks like name on your hosting site for the repacked boot was named wrong.
Actual file: http://downloads.codefi.re/autoprim...s/30D/LG-D85130D-Flashable.Boot-AUTORPACK.zip
Click to expand...
Click to collapse
404

nachumama said:
404
Click to expand...
Click to collapse
He fixed the link, use the link in the OP

gotcha...... ok so i downloaded all the necessary files but i want to use android pay, should i install superSU or not?

nachumama said:
gotcha...... ok so i downloaded all the necessary files but i want to use android pay, should i install superSU or not?
Click to expand...
Click to collapse
no

keki92 said:
no
Click to expand...
Click to collapse
thanks buddy

Modem and bootloader flashed over 20G and Exodus ROM. No problems to report. Thanks.

How big is he COMPLETE file size itself?

just upgraded ; it works great, thx
just need the stock dialer; t-mobile one is bad to say it lightly

Hello- I am currently using the D851 T Mobile version in New Zealand on Vodafone and all is well. The phone is obviously unlocked.
If I flash this update will I still be unlocked afterwards ?
Thanks To all, LL13-

lamplighter13 said:
Hello- I am currently using the D851 T Mobile version in New Zealand on Vodafone and all is well. The phone is obviously unlocked.
If I flash this update will I still be unlocked afterwards ?
Thanks To all, LL13-
Click to expand...
Click to collapse
Yes

RicardoSal24 said:
Yes
Click to expand...
Click to collapse
WooHoo, Im gonna flash away.
Thanks Ricardo !!! :highfive::highfive:

Hi there. Great work! Quick question though. If I have stock lollipop and it doesn't have root/twrp. The steps to do this would be to root first -> install twrp -> and then follow the steps?
Thanks,

keki92 said:
no
Click to expand...
Click to collapse
Do you need TWRP or Root to use Lg flash tool?

Kenneth_MC said:
Do you need TWRP or Root to use Lg flash tool?
Click to expand...
Click to collapse
No...

@autoprime
As always your work here is appreciated, thank you for the posting, this will benefit everyone.

@autoprime - awesome work, thanks so much!
A couple suggestions/notes, dunno if ypu want to put this in the OP for some people.
1. If you've encrypted your phone, you'll need to unencrypt first.
2. If you have Xposed installed, uninstall it before you start.
My phone feels new with this update, it's great.

Anyone updated please tell me knock code security with 6 taps or 3 taps like 20G? Thanks

If I am currently on CM13, besides the radio, can I flash bootloader and boot? If so which boot?
Thanks for the help.

Install Android 10 Beta on Lenovo Z5 Pro GT

How to install Android 10 on Z5 PRO GT
*edit*
If any of you uploade the android 10 zip elsewhere send me the links and after validating the link ill put it up here
Downloads
ADB+FASTBOOT
Android 10 Zip
TWRP
For starters don't try to just install zip via stock recovery it will just error out (THEY KNOW THAT YOU'RE BEING A NAUGHTY BOI AND INSTALLING IT WITHOUT BEING A BETA TESTER)
Before you start be on latest stock firmware
For starters install adb+fastboot drivers
After that go to your phone enable developer options by slammin that build number
Then go to developer options and enable usb debugging and oem unlock
Go to about and write down you IMEI 1 and serial number
Then go to Magical Link Yes
Yes yes its in Chinese i think
Here's a handy little translation for you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And apply for bootloader unlock image
Download it and save it somewhere you can find it
Now the fun begins make sure to follow as i say cuz otherwise there's a chance android 10 might not install yes its very picky
Make sure you're on latest official ZUI 11.1.021
Now turn the phone off and power it on holding volume down and power button to boot into bootloader
Now its time to unlock the bootloader
Connect the phone to the computer and open CMD in the fastboot folder place the bootloader unlock img in the same folder
Type in
fastboot flash unlock sn.img
and after that type in
fastboot oem unlock-go
Now your bootloader is unlocked
Now you must boot the phone up and set it up with unlocked bootloader (yes this is important)
Set up the WiFi etc
And make sure to set up a pin and fingerprint
After you finish setup turn off the phone and boot into bootloader again (volume down+ power button)
Now flash TWRP
(put downloaded TWRP image into fastboot folder)
And then type in
fastboot flash recovery twrp.img and slam that enter
after its done click vol down few times to boot into the recovery click power button to select
Now when you boot into recovery it will ask you for a password to decrypt stuff (type in the pin/password you set up earlier when setting the phone up and click ok) now it will decrypt the storage
Now there's 2 ways to do this
1st Option
Connect phone to PC and drag the Android 10 zip to the internal storage
2nd option
Drag the firmware to a USB device and plug it in via OTG
Now click install (do not do any wipes)
If you went with the 1st option then select the zip file on internal storage and flash
If you went for 2nd option switch storage to OTG and click zip file and flash
Wait for it to flash
If it errors out that means you didn't listen and didn't set up pin and fingerprint (they are crucial so don't skip them the update somehow relies on them being set up and if they are not it doesn't wanna flash )
However if you did follow the instructions flashing will go well and after a bit it will be done
(Optional)
You can also flash magisk straight after without any reboots
Now back out and turn the phone off not reboot
Now boot into bootloader (vol down+power)
And you will see that your bootloader is locked again yes that's after effect of the firmware flash and fun part is that until you unlock it phone won't boot either cuz you have TWRP installed
Now unlock the bootloader again (scroll up for the instructions) and after that phone will reboot
Now wait few minutes for phone to boot and huzzah you have yourself some android 10 action on Lenovo Z5 Pro GT
(There is a chance firmware can overwrite TWRP to stock recovery if it doesn't just use the instructions above to flash TWRP again)
And that's about it
Enjoy your android 10

thank you its flashing now, after this can we get updates for the beta?

isaias19 said:
thank you its flashing now, after this can we get updates for the beta?
Click to expand...
Click to collapse
nope as
1 your bootloader will be unlocked
2 you have twrp
3 its internal beta build (thats why we cant just flash it on top of official software)

any bugs that hinder daily use? and how is the antutu score?

Hmm since you need to set-up the phone from ZUI 11 and does not require wiping.. after installing the beta version, does it just update the rom and carry over the setup you did on the previous rom? I'm asking this because my phone have the latest ZUI 11, bootloader unlock and TWRP installed.

hristcroixqwerty said:
Hmm since you need to set-up the phone from ZUI 11 and does not require wiping.. after installing the beta version, does it just update the rom and carry over the setup you did on the previous rom? I'm asking this because my phone have the latest ZUI 11, bootloader unlock and TWRP installed.
Click to expand...
Click to collapse
yes so you loose no data its just like an update

Performance? Screenshots? (Maybe youtube movie)

wolfaas12345 said:
yes so you loose no data its just like an update
Click to expand...
Click to collapse
Nice. That's good to know! I'll try this beta later when I get home. Can u kindly list the things working and not compared to stable version of ZUI? Thanks

Hey @wolfaas12345
I am very curious if this update has issues with notifications and bluetooth audio. I had those issues with ZUI 11 and i could not fix them (not even with some good advice).
Could you let me know?
---------- Post added at 03:18 PM ---------- Previous post was at 02:42 PM ----------
PS i am also very curious if other functions (like fingerprint scanner and the slider) work

Sheep888 said:
Hey @wolfaas12345
I am very curious if this update has issues with notifications and bluetooth audio. I had those issues with ZUI 11 and i could not fix them (not even with some good advice).
Could you let me know?
---------- Post added at 03:18 PM ---------- Previous post was at 02:42 PM ----------
PS i am also very curious if other functions (like fingerprint scanner and the slider) work
Click to expand...
Click to collapse
I got my notifications working by deleting the zuisecurity app.. I followed instructions from a Russian site called 4pda.. I can't fine the exact instructions I did but they posted another way to do it.
"I personally recommend using the built-in TWRP file manager ( Advanced -> File Manager ). First you need to mount the system partition ( Mount -> [✓] System ). Move the folder / system_root / system / preinstall -> Move -> / sdcard / Backup . Move the folder / system_root / system / priv-app / ZuiSecurity -> Move -> / sdcard / Backup . Go to / data / app*
and select the application folder from which you want to always be informed, and you want this application to be able to start automatically under any conditions -> Move -> / system_root / system / app .
Usually, the rights are already needed, but just in case it’s worth checking, the files have 644, the folders have 755. Choose the folder -> chmod -> 0755 . Select subfolders -> chmod -> 0755 . Select the files inside them -> chmod -> 0644 .
Next, Reboot -> System .
If the system hangs on the bootloop, then try to boot into recovery, and then Wipe -> [✓]Dalvik-cache ."
Text is Russian but chrome translated it so it might be a little different..
Edit:
I found the instruction I mentioned above, but you need PC with adb installed to do it.
"Finally overcame notifications, without root. Via adb demolished Security. And after a while (perhaps reinstalling the prog with notifications and removing Google Services updates helped) notifications went. Access to the permissions menu has become unavailable. Prior to this, nothing helped, neither adding to exceptions / optimizations / permissions in the background / permission notifications / whitelist for autostart and so on, nor reinstalling Google Services. I now manage permissions through the app Ops through adb . Here are the commands for removing Security via adb , the root is not needed
adb pull / system / priv-app / ZuiSecurity /
adb shell pm uninstall -k --user 0 com.zui.safecenter
The first command backups the folder from Security to the computer, to the folder with adb, the second removes Security itself. Do not forget to reboot at the end"
the first cmd will actually take a bit longer to finish since it will backup all files from system, priv-app, and zuisecurity folders.
second command will remove the zuisecurity app. I suggest u do a full backup using TWRP, and save the backup on a USB, not internal storage as suggested on the russian site.

TWRP gave me an error 7.. I started by installing the rom since I have the latest ZUI and have unlock bootloader already.
I have fingerprint, pin set-up and wifi also. Any ideas?

@hristcroixqwerty
and how are you managing permissions now? all in adb?
what if a new app asks for permissions? do you see a pop up?

Oh I forgot to mention that.. I'm using App Ops for permissions, and yes they still pop up.

hristcroixqwerty said:
TWRP gave me an error 7.. I started by installing the rom since I have the latest ZUI and have unlock bootloader already.
I have fingerprint, pin set-up and wifi also. Any ideas?
Click to expand...
Click to collapse
try this, it's work for me.
1. flash Zui10 via qfil.
2. relock bootloader
3. ota update to zui11.1
4. unlock bootloader
5. set-up fingerprint and pin
6. flash twrp
7. flash zui11.5 via twrp

So I have to clean wipe again? I don't want to do it then. Base on the tutorial u mentioned, I'm done with the instructions from 1-6 since I'm using this phone with zui11.1 since December with unlock bootloader and TWRP. I don't want to re-setup again, kinda lazy. But anyway thanks for the reply!

:cyclops:
is there a dark mode:cyclops:

leerh said:
:cyclops:
is there a dark mode:cyclops:
Click to expand...
Click to collapse
Would like to know that too

leerh said:
:cyclops:
is there a dark mode:cyclops:
Click to expand...
Click to collapse
Would like to know that too

wolfaas12345 said:
yes so you loose no data its just like an update
Click to expand...
Click to collapse
metalspider said:
@hristcroixqwerty
and how are you managing permissions now? all in adb?
what if a new app asks for permissions? do you see a pop up?
Click to expand...
Click to collapse
Henkl said:
Would like to know that too
Click to expand...
Click to collapse
Yup there's dark mode base on screen shots I saw on a Facebook page, but unfortunately it's not 100% working on all apps.. Some have still white borders etc etc..

Instructions worked perfect, got it installen without any problems thanks to wolfaas12345.
It does have a dark mode under: settings > developer options > themes > dark.
Did not encounter issues, exept with notifications. Notifications show up but dont make a sound or vibration. Inunstalling zui security and installing app ops did not work.

[Fluid OS][Android 11] Guide to install Fluid OS on Huawei Honor 6X

POST - v3
(This number will increase every time the post is updated.)What's new in v3?
Added procedure in a new spoiler to install the base EMUI 8 for hi6250 devices as using the EMUI 8 we get with our device is causing some errors and bugs. Thanks to @Kentoto2021 and @VarianWrynn for testing and reporting this problem.
Spoiler: Version Changelog
What's new in v2?
Updated the thread with newly found bugs in "What isn't working" section.
Made small changes to thread.
What's new in v1?
Took a lot of time to collect the infinity stones.
Took even longer to make Mr. Thanos snap this thread to existence.
What's new in v0?
LoL Who knows?
This ROM is none of my work. I just tested it and provided appropriate procedure and fixes to errors(Found nothing yet).
Thanks a ton to @Hami_Do for making this possible. Original Post : link.
Thanks to Huawei for making their phones nearly unbrickable .
Thanks again to Huawei for making more than one device with hi6250 chipset.
Thanks a lot to @Djiban for helping me and testing different procedures, fixes and ROMs.
Follow this thread only if you know what you're doing. I'm not responsibe for any damage or thermonuclear wars .
Read the post completely and understand it before doing anything ATLEAST FOR THE SAKE OF MANKIND .
This thread is best viewed in PC and is Noob Friendly.
Spoiler: Requirements
Requirements:
Huawei Honor 6X (Unlocked Bootloader. If not, follow this post (using PotatoNV) or YouTube video.
EMUI 8 (If not, you could follow this guide, direct file : link).
GSI from link.
TWRP from attachments or link or any other TWRP recovery compatible with Honor 6X EMUI 8.
Gapps(Optional, I used pico OpenGapps).
stock recovery (available in attachments).
Time.
PC.
ADB and Fastboot.
Patience.
Human Brain.
ALL IN ONE GUIDE : Check it out here. It contains every thing in detail all the way from bricked device -> EMUI 2 -> EMUI 5 -> EMUI 8 -> AOSP 10. Thanks to @lmaohelp for his effort and describing everything in detail.
Useful Information :
What is OpenGapps? Check it out at OpenGapps.org!
What is ARM64? it is a 64 bit operating system/platform.
What isn't working :
Usb Notification (Options will be greyed out. To transfer files, go to Developer Options > Default USB configuration > set it to File Transfer).
Dual sim is buggy. Single sim works perfectly. Thanks to @Loopeez for reporting it.
What's Working :
Everything.
*Tell me if something isn't working.
***If you have a bricked device/messed up somewhere during the process and unable to figure out what to do, follow this guide by @lmaohelp .***
Spoiler: Installing base EMUI 8 for hi6250 devices.
This was already described in a separate thread which describes the process to get back to EMUI 8 from custom ROMs. You can find it here.
Just follow the procedure in that thread. You need not even flash the frp unlock thing. After that, follow the process described in this thread.
It's recommended to be on original EMUI 8 before installing base EMUI 8 for hi6250. Follow the process linked in requirements to install EMUI 8 first then follow this spoiler.
Procedure :
Make sure your device is running stock EMUI 8.
Extract downloaded image using some xz extractor(7zip can also do this), copy it to pc.
Reboot your device to TWRP.
Format the data partition {Wipe > Format data > type "yes"}
Flash fstab.hi6250b.zip from attachments
Check if your device is detected by adb using
Code:
adb devices
.
Move the img file using adb to device
Code:
adb push -p *img-name*.img /sdcard/
(the img file must be in adb directory).
(Optional, only if you want gapps) Move Gapps in the same manner
Code:
adb push -p *gapps-name*.zip /sdcard/
(the zip file must be in adb directory).
Install img as system image {Install > Install Image > Select > Choose system image > Swipe➡}.
(Optional, only if you want gapps) Unmount and Remount system partition as writable. Go to wipe > advanced wipe > Choose system > resize > Swipe➡.
Flash gapps.
Flash stock recovery. Push it with adb using
Code:
adb push -p stock_recovery_ramdisk.img /sdcard/
and flash it with twrp as "Recovery" after choosing install image.
Disconnect your device from PC and reboot to recovery(stock one).
Clear cache partition and perform a factory reset(You'll get an error during factory reset but you have to do it) (your device will bootloop if wiped with twrp itself).
Reboot, Cross your fingers and wait.
>Booting is quite different in android 11 ROMs on our device. You'll see the "Your device has been unlocked" screen for more time than usual. Then, you'll see the boot animation (for very short time on subsequent boots) and the device will boot to ROM. So, be patient. (This isn't the case with ROMs upto android 10)
>Face Unlock is working perfectly
Spoiler: Additionals
Additionals:
>Its better to charge your device to atleast 70% before doing anything as you'll have ample of time to recover it if you messed up something. If not, you can still charge your device in eRecovery mode and twrp but i found some issues like heating up and slow charging.
>Don't forget to set ringtone, notification and other sounds from settings after booting.
Spoiler: Updates
Updates :
Nothing yet...
Happy Flashing !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

RESERVED

Thx for keep looking for the best andorid 11 rom for Honor 6X. Installed it, no issue so far, testing it as a 2nd daily device. Let you know...
Below is my installation procedure using a microsdcard, quite the same as post #1 apart of that.
- on a micro SD card, download:
https://forum.xda-developers.com/attachments/twrp-img.5326857/
https://sourceforge.net/projects/darkjoker360-developements/files/Huawei/fstab.hi6250b.zip/download
https://forum.xda-developers.com/attachments/stock_recovery_ramdisk-img.5321325
FluidOS-1.1-Rum-R-Hi6250-emui8.img extracted with 7zip from https://mega.nz/#!jWQWEJ7Z!cd2S5oy2g8IdUuw5PfQEkSadslojBpFgB6ltUNOpc-w
OPTIONAL: pico gapps from https://sourceforge.net/projects/opengapps/files/arm64/test/20210110/
- insert the micro SD card in your usb debugging enabled Honor 6X (with EMUI 8 or custom rom installed over EMUI8), and connect it to a PC with adb & fastboot
- in adb, "adb reboot bootloader"
- in fastboot, "fastboot flash recovery_ramdisk TWRP.img"
- in fastboot, "fastboot reboot"
- after reboot completed, "adb reboot recovery"
- disconnect the honor 6x from the PC
- in TWRP recovery, Format the data partition {Wipe > Format data > type "yes"}
- in TWRP recovery, flash fstab.hi6250b.zip
- in TWRP Recovery, flash FluidOS-1.1-Rum-R-Hi6250-emui8.img {Install > Install Image > Select > Choose system image > Swipe}
- OPTIONNAL IF GAPPS WANTED: in TWRP recovery, Mount system partition (Mount > check system and unckeck read only OR reboot in recovery).And
resize system (Go to wipe > advanced wipe > Choose system > repair > resize). Then install open_gapps-arm64-11.0-pico-XXXXXXX.zip.
- in TWRP Recovery Flash STOCK_RECOVERY_RAMDISK.img {Install > Install Image > Select > Choose recovery image > Swipe}
- in TWRP recovery, reboot to recovery (even if TWRP says no OS installed)
- in Stock recovery, wipe cache and factory reset (error is normal)
- in Stock recovery, reboot and wait
Click to expand...
Click to collapse

Rom is very nice so far , no issue yet!!!!

Djiban said:
Rom is very nice so far , no issue yet!!!!
Click to expand...
Click to collapse
Same with me.

Hello, do you know how can I factory reset in the Huawei ERecovery step at the end ?
I try to do it so but it keep reboot my phone to TWRP recovery, it's like I can't wipe data/factory reset my phone from the stock recovery.
Maybe TWRP is bloking it ? Should I disable something in the TWRP settings ?
Between thanks for yours work !

Kentoto2021 said:
Hello, do you know how can I factory reset in the Huawei ERecovery step at the end ?
I try to do it so but it keep reboot my phone to TWRP recovery, it's like I can't wipe data/factory reset my phone from the stock recovery.
Maybe TWRP is bloking it ? Should I disable something in the TWRP settings ?
Between thanks for yours work !
Click to expand...
Click to collapse
Your mistake is that your using stock erecovery.
You have to use stock recovery. Meaning flashing the stock recovery provided in post 1 over the twrp recovery :
- in TWRP Recovery Flash STOCK_RECOVERY_RAMDISK.img {Install > Install Image > Select > Choose recovery image > Swipe}
- in TWRP recovery, reboot to recovery (even if TWRP says no OS installed)
- in Stock recovery, wipe cache and factory reset (error is normal)
- in Stock recovery, reboot and wait

Yep thanks, I forget to choose Recovery when I flash the stock recovery ramdisk, so my twrp install it on the last choice that it's system image
To resolve my problem I reinstall my previous system (EMUI 8 for honor 6x) and this time I wipe the david cache, system, cache ... after format the data partition
And I didn't install any OpenGAPPS and it works fine !
A little empty, but I will try without Google services to see if it sweet to me, it saved a lot of battery so that's nice !
Again, I thank you all of you for your amazing work thank you very much my honor 6x can still live haha
Edit : no it's too painfull without google services haha

Kentoto2021 said:
Yep thanks, I forget to choose Recovery when I flash the stock recovery ramdisk, so my twrp install it on the last choice that it's system image
To resolve my problem I reinstall my previous system (EMUI 8 for honor 6x) and this time I wipe the david cache, system, cache ... after format the data partition
And I didn't install any OpenGAPPS and it works fine !
A little empty, but I will try without Google services to see if it sweet to me, it saved a lot of battery so that's nice !
Again, I thank you all of you for your amazing work thank you very much my honor 6x can still live haha
Click to expand...
Click to collapse
Perform a factory reset after flashing gapps too.
Flashing gapps without factory reset crashed chromium based browsers on AOSP 10. This might not be the case with this rom but better do it.

Kentoto2021 said:
Yep thanks, I forget to choose Recovery when I flash the stock recovery ramdisk, so my twrp install it on the last choice that it's system image
To resolve my problem I reinstall my previous system (EMUI 8 for honor 6x) and this time I wipe the david cache, system, cache ... after format the data partition
And I didn't install any OpenGAPPS and it works fine !
A little empty, but I will try without Google services to see if it sweet to me, it saved a lot of battery so that's nice !
Again, I thank you all of you for your amazing work thank you very much my honor 6x can still live haha
Edit : no it's too painfull without google services haha
Click to expand...
Click to collapse
Android without Google services is more and more easy.
Aurora market is a good choice.
I have also some workaround for'GPS localisation and so....

Nevertheless, gapps working fine for me, no device lag cause of it ! All services active and working

Djiban said:
Nvertheless, gapps working fine for me, no device lag cause of it ! All services active and working
Click to expand...
Click to collapse
Same with me. And the power menu controls are just AWESOME.

Dang, I cannot go past installing Huawei USB COM driver to unlock my device (

jottect said:
Dang, I cannot go past installing Huawei USB COM driver to unlock my device (
Click to expand...
Click to collapse
? Didn't get you... Did you mean bootloader unlock? If yes, follow @lmaohelp 's guide mentioned in post 1. He described it very clearly.

Venkata Lochan Nune said:
? Didn't get you... Did you mean bootloader unlock? If yes, follow @lmaohelp 's guide mentioned in post 1. He described it very clearly.
Click to expand...
Click to collapse
Yes, it's clear, read the posts, watched YT video, but one of the steps is installing Huawei USB COM driver to replace the SER driver, and I already tried on 2 computers, Windows 10 (updated) fails to install that driver, and without it, PotatoNV won't 'see' the device.

Venkata Lochan Nune said:
Same with me. And the power menu controls are just AWESOME.
View attachment 5337621
Click to expand...
Click to collapse
Oooh how did you get that ?
I only have this :
Is it Gapps ? I use the nano one

Kentoto2021 said:
Is it Gapps ? I use the nano one
Click to expand...
Click to collapse
Nope, there's an app on play store called "power menu controls" download that. And the other, you could use Tasker(also an app from play store) to create your custom controls like the ones I did for screen rotation.

jottect said:
Yes, it's clear, read the posts, watched YT video, but one of the steps is installing Huawei USB COM driver to replace the SER driver, and I already tried on 2 computers, Windows 10 (updated) fails to install that driver, and without it, PotatoNV won't 'see' the device.
Click to expand...
Click to collapse
what's the procedure you followed to install drivers?
Unzip the attached file, and choose "DriverSetup.exe" and that's it. uninstall these drivers after installing the rom using "DriverUninstall.exe" for mtp to work. The process will ask for reboot in some language(i think Chinese) after uninstalling but it isn't needed.
*These are also the fastboot drivers(but the name in attachments is testpoint drivers).

Kentoto2021 said:
Edit : no it's too painfull without google services haha
Click to expand...
Click to collapse
Indeed! I once tried using AOSP 10 with floss services and without Google ones but yeah it didn't last even a day... lol I flashed gapps within 5 hrs.

Venkata Lochan Nune said:
what's the procedure you followed to install drivers?
Unzip the attached file, and choose "DriverSetup.exe" and that's it. uninstall these drivers after installing the rom using "DriverUninstall.exe" for mtp to work. The process will ask for reboot in some language(i think Chinese) after uninstalling but it isn't needed.
*These are also the fastboot drivers(but the name in attachments is testpoint drivers).
Click to expand...
Click to collapse
Thanks a million! It worked., I just unlocked the bootloader, I did not have these drivers.
Now onto next steps... may take a while, I'm old and slow
Well, did not go too far... when trying to flash twrp (as per this guide:
), I'm getting an error:
fastboot flash recovery_ramdisk twrp.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (24466 KB)...
OKAY [ 0.642s]
writing 'recovery_ramdisk'...
FAILED (remote: partition length get error)
finished.
Ideas?
P.S. I also tried
fastboot flash recovery twrp.img
target reported max download size of 471859200 bytes
sending 'recovery' (24466 KB)...
OKAY [ 0.642s]
writing 'recovery'...
FAILED (remote: image verification error)

Development [ROM][Android 11][OP9Pro] crDroid v7

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
Pre-installation:
Until TWRP is ready, this version of crDroid comes with prebaked core Gapps
Download LOS recovery
Download Tiny ADB & Fastboot
First time installation (clean flash):
It is recommended to come clean from latest OOS installation
Backup your data to PC, OTG flash drive
Reboot to bootloader (fastboot)
Run fastboot devices to confirm there is connection to the phone
Install LOS recovery with following command fastboot flash boot lineage-18.1-20210615-recovery-lemonadep.img
Power off and reboot to recovery by pressing VOL down + Power from shutdown state
Navigate with volume keys to Factory Reset -> Format data/factory reset and confirm format of data
Go back to main menu and choose Apply update and Apply from ADB
Now adb sideload latest crDroid package with adb sideload crDroid.zip
When asked to confirm flash, do confirm it
Sideload push will go up to 47% and fail - no worry is normal
Reboot to system
Update installation:
Through recovery:
Download latest crDroid zip and reboot to recovery
Choose Apply update and Apply from ADB
Now adb sideload latest crDroid package with adb sideload crDroid.zip
Sideload push will go up to 47% and fail - no worry is normal
Reboot to system
Built-in OTA (slower):
When ready
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sm8350
Download:
ROM https://crdroid.net/lemonadep#crDroid-v7
Changelog: https://crdroid.net/lemonadep#crDroid-v7/changelog
Known issues:
- waiting for more feedback to see
Visit official website @ crDroid.net
crDroid OnePlus 9 Pro Telegram
crDroid Community Telegram
crDroid is built with passion by @neobuddy89 and @gwolfu
If you like our work, do consider a donation to support further device development
ROM OS Version: Android 11
ROM Kernel: Linux 5.4

Awesome.

I have the Tmobile version of OP9pro. Will I need to flash the tmobile modem.img?

burtonlax said:
I have the Tmobile version of OP9pro. Will I need to flash the tmobile modem.img?
Click to expand...
Click to collapse
Testing of this rom has been done on the EU variant
I am not sure how Tmobile version works, but rom side, is same as on LOS

gwolfu said:
Testing of this rom has been done on the EU variant
I am not sure how Tmobile version works, but rom side, is same as on LOS
Click to expand...
Click to collapse
it's best to go global first coming from tmo. No, as long as you don't do an ota on Global. so flash global then boot, then flash custom rom(following their guide).
If u lose service modem is provided (Just unzip) Bootloader fastboot command "fastboot flash modem modem.img
This of course is assuming u got unlock.bin and unlocked Bootloader

Here we go!
Welcome @gwolfu
Hopefully we don't need 11.2.7.7?? It's not out here in EU yet, what's the reason most of the custom roms seem to want the EU build by the way?

CRDroid, fantastic to see this here my favorite ROM since the days of my LG G3! Can't wait to try this out, will sadly be waiting till TWRP tho as I'd prefer to avaoid gapps. Unless there is any chance of a non gapps build also? Cheeky....!

I'll flash and report tomorrow .
post logs through here or telegram?

ryantf420 said:
I'll flash and report tomorrow .
post logs through here or telegram?
Click to expand...
Click to collapse
preferably here as to better keep track of stuff

I know it may not be recommended, but has anyone been able to flash this without using a computer?

phr0zen said:
I know it may not be recommended, but has anyone been able to flash this without using a computer?
Click to expand...
Click to collapse
Since the instructions specify using fastboot (as well as sideloading the rom), that's not possible.

phr0zen said:
I know it may not be recommended, but has anyone been able to flash this without using a computer?
Click to expand...
Click to collapse
without TWRP, not possible

TWRP is death.

This is awesome news brother

So I've been out of the root and rom flashing game for a bit, got it side loaded and everything my issue is i cant get root permissions working wasn't sure how i go about setting it up since all i have worked with on the one plus is magisk and having to install to a .img and input on how to get it working?

crazyvash1 said:
So I've been out of the root and rom flashing game for a bit, got it side loaded and everything my issue is i cant get root permissions working wasn't sure how i go about setting it up since all i have worked with on the one plus is magisk and having to install to a .img and input on how to get it working?
Click to expand...
Click to collapse
extract crdroid.zip content
extract boot.img from payload.bin file using payload dumper
install magisk apk on phone as any other apk (I know we are not rooted yet)
copy boot.img to internal phone storage
open magisk and click on top install button
choose "select and patch a file"
select the boot.img from internal storage
after done, copy magisk patched boot image from Download folder on phone storage, to PC
now on PC, reboot to bootloader and run
Code:
fastboot flash boot magisk_patched-23000_xxxxx.img
check file name to match xxxxx = random generated text
reboot to system and enjoy

gwolfu said:
extract crdroid.zip content
extract boot.img from payload.bin file using payload dumper
install magisk apk on phone as any other apk (I know we are not rooted yet)
copy boot.img to internal phone storage
open magisk and click on top install button
choose "select and patch a file"
select the boot.img from internal storage
after done, copy magisk patched boot image from Download folder on phone storage, to PC
now on PC, reboot to bootloader and run
Code:
fastboot flash boot magisk_patched-23000_xxxxx.img
check file name to match xxxxx = random generated text
reboot to system and enjoy
Click to expand...
Click to collapse
Think you missed the last step to use Magisk again to root the installed boot image?

djsubterrain said:
Think you missed the last step to use Magisk again to root the installed boot image?
Click to expand...
Click to collapse
Not need
I used fastboot flash not fastboot boot so boot is already patched
No temp boot and patch after

gwolfu said:
Not need
I used fastboot flash not fastboot boot so boot is already patched
No temp boot and patch after
Click to expand...
Click to collapse
Didn't notice that, totally right. Sorry.

truly have found nothing broken
except power menu settings only work in crdroid Settings not in System>Gestures>power menu...
Great job

Develop Bugs

welcome