Related
I am new to this device and I want to flash pixel experience rom,
Bootloader is not unlocked, I need step by step guide to flash pixel experience rom (if possible with links)
Dextor69 said:
I am new to this device and I want to flash pixel experience rom,
Bootloader is not unlocked, I need step by step guide to flash pixel experience rom (if possible with links)
Click to expand...
Click to collapse
I am trying to list the steps. I may have missed some, so wait for others to reply also.
Installing Chinese ZUI 3.5.xx and then OTA to latest build (for getting latest baseband)
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/rom-zui-3-5-243st-z2-plus-z2-t3745636
Unlocking bootloader plus installing TWRP:- https://forum.xda-developers.com/lenovo-zuk-z2/how-to/z2-z2-plus-bootloader-unlock-twrp-t3615283
Treble ROM vs Non Treble ROM process (depending on ROM type you need to format your phone and TWRP selection)
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/z2plus-treble-roms-flashing-reverting-t3778287
Pixel is a full treble ROM with latest release!!
Last, the easiest part, downloading the PE ROM flashing/installing via TWRP
NaXal said:
I am trying to list the steps. I may have missed some, so wait for others to reply also.
Installing Chinese ZUI 3.5.xx and then OTA to latest build (for getting latest baseband)
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/rom-zui-3-5-243st-z2-plus-z2-t3745636
Unlocking bootloader plus installing TWRP:- https://forum.xda-developers.com/lenovo-zuk-z2/how-to/z2-z2-plus-bootloader-unlock-twrp-t3615283
Treble ROM vs Non Treble ROM process (depending on ROM type you need to format your phone and TWRP selection)
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/z2plus-treble-roms-flashing-reverting-t3778287
Pixel is a full treble ROM with latest release!!
Last, the easiest part, downloading the PE ROM flashing/installing via TWRP
Click to expand...
Click to collapse
Somehow i managed to flash jaguar rom,will soon flash pixel exp after update
Successfully flashed emui 8.0 on usa variant without need to rebrand by using hurupdater WOOT AND zero issues encountered
Step 1. all i did was fastboot flash system of 64bit A only gsi resurrection remix
Step 2. make sure you are using stock recovery from huawie and fromat data.
Step 3. reboot && profit
EDIT: side note, apparently people on here are asking if this is for real or not lol. heres a screenshot in here https://imgur.com/a/depZugF
i have tested this rom for about 6 hours and as of now its smooth as butter, havent had a single issue (yet).
pretty sure if you are using emui 8 you are golden to install whatever Aonly GSI you want.
also for bonus i instaled latest magisk and you guessed it is flawless
hoping this is not a duplicate but i cant find a post on this yet
try heading of to treble rom dev and have a go at it guys!
Edit: BIG THANKS TO JAX
download everything except hwota> https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
unlock bootloader
flash nougat compatable twrp (search the dev form)
thanks jax 5. Add the downloaded files to the folder "HWOTA7\Update" and rename two files same as mentioned below->
- update_data_full_public.zip to update_data_public.zip
- update_full_BLN-AL20_all_cn.zip to update_all_hw.zip
-update.zip don't rename.
place all three filles in same folder on sdcard
download hurupdater (search the form)
place it in same folder as the file just mentioned
boot to twrp.
format system data cache
navigate to sdcard the update folder with all four files.
flash hurupdater.zip
press vol down
wait for completion
reboot system
wait 10 minutes
hold power till reboot
boot to recovery and it should be stock.
format data
reboot
should boot up and work flawlessly except for missing browser which can be downloaded :/
woot you are on emui 8 and your partition setup is now oreo
now turn phone off
hold vol down and plug into pc with fastboot tools
go here https://forum.xda-developers.com/project-treble/trebleenabled-device-development
download a oreo rom A only (i used Resurrection Remix)
flash system with fastboot
reboot to recovery
format data
reboot
profit.
BONUS
go here after all said and done https://forum.xda-developers.com/honor-6x/development/rom-emui-8-0-0-honor-6x-dual-sim-t3794079
make sure to thank KingOfMezi
download this https://mega.nz/#!a81EDZAR!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
fastboot flash recovery_ramdisk RECOVERY-V2.img
boot to recovery and flash latest magisk for root goodies
Which emui 8 did you flash ? I have a usa Honor 6x and would like to do the same
pspgarret said:
Successfully flashed emui 8.0 on usa variant without need to rebrand by using hurupdater WOOT AND zero issues encountered
Step 1. all i did was fastboot flash system of 64bit A only gsi resurrection remix
Step 2. make sure you are using stock recovery from huawie and fromat data.
Step 3. reboot && profit
i have tested this rom for about 6 hours and as of now its smooth as butter, havent had a single issue (yet).
pretty sure if you are using emui 8 you are golden to install whatever Aonly GSI you want.
also for bonus i instaled latest magisk and you guessed it is flawless
hoping this is not a duplicate but i cant find a post on this yet
try heading of to trble rom dev and have a go at it guys!
Click to expand...
Click to collapse
is themes apps working for you? flashing emui 8 via huru will give incomplete flash.
This was possible for the US variant ( L24) since July. It was mentioned couple times before. I think using hwota is a cleaner way of upgrading.
How do you do it?, Where is the links of the files?
thanks for responses, i updated the op and hopefully that is a bit more informative.
let me know if it is confusing at all and ill try to fix it
Can i flash p gsi.? (havoc 2.0)
And.. Is volte working..?
If I am not wrong I think volte will not work on any custom roms except for a stock based custom room because Huawei hasn't released source for it. Dunno I could be wronf
jhorne917 said:
If I am not wrong I think volte will not work on any custom roms except for a stock based custom room because Huawei hasn't released source for it. Dunno I could be wronf
Click to expand...
Click to collapse
It's not a custom rom... It's gsi
anyone tested other gsi? i only tried open kirin roms
are you sure it didn't rebranded? at about information, it say bln-24 or bln-al20? it could brick the phone, I thinks is better using the emui 8 from india instead the china version
hey guys, any A ONLY GSI ROM should work. i used treble resurrection remix NOT openkirin as the op states.
and i DID NOT rebrand, it states in rom info i am BLN-L24 -thats usa ver.
pspgarret said:
hey guys, any A ONLY GSI ROM should work. i used treble resurrection remix NOT openkirin as the op states.
and i DID NOT rebrand, it states in rom info i am BLN-L24 -thats usa ver.
Click to expand...
Click to collapse
You went from android7 to RR based on android8 without rebranding and updating to stock android8 ?
Nollie8969 said:
You went from android7 to RR based on android8 without rebranding and updating to stock android8 ?
Click to expand...
Click to collapse
op states i upgraded to emui 8 using nothing but hurupdater script and update packages in 7.x twrp buddy
https://imgur.com/a/depZugF
That's great man, i need to backup a lot of stuff since last TWRP backup, but I'm definitely gonna do this. I own a BLN-L21, so i hope this'll works the same as on any other variant, and that would be the real gem in all of this. Thanks for sharing
galapagos said:
This was possible for the US variant ( L24) since July. It was mentioned couple times before. I think using hwota is a cleaner way of upgrading.
Click to expand...
Click to collapse
Link to guide for the hwota method of upgrading bln-l24 to EMUI 8 without rebranding?
You mean the guide: How to brick your phone ?
Nollie8969 said:
You mean the guide: How to brick your phone ?
Click to expand...
Click to collapse
That's helpful and informative.
johnnyrichter said:
Link to guide for the hwota method of upgrading bln-l24 to EMUI 8 without rebranding?
Click to expand...
Click to collapse
Searching for "hwota7" gives you this: https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
In short, all you have to do is put the oreo firmware files (L22 version, not the Chinese version) in the update folder and run the batch script. Choose L24 region during the process and you're done. I've done this at least couple dozen times as I frequently test out all treble ROMs as they're released/updated, and sometimes go back to nougat in case I find something that's not compatible with oreo. But all in all, this oreo ROM is very stable and is my daily driver.
galapagos said:
Searching for "hwota7" gives you this: https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
In short, all you have to do is put the oreo firmware files (L22 version, not the Chinese version) in the update folder and run the batch script. Choose L24 region during the process and you're done. I've done this at least couple dozen times as I frequently test out all treble ROMs as they're released/updated, and sometimes go back to nougat in case I find something that's not compatible with oreo. But all in all, this oreo ROM is very stable and is my daily driver.
Click to expand...
Click to collapse
During your testing, which ROM has been the most stable in terms of daily-driver use so far? Last year after getting this 6x I tried a few different ROMS, back before OpenKirin happened, and had nothing but problems with boot loops and etc so I went back to stock EMUI5. Few days ago I got B365 and then B376 via OTA after installing the Huawei software on my PC. This phone really makes me miss my S5 with LineageOS.
Greetings developers, someone of you can help me with the following problem, I can not install the rom AOSP the TWRP does not mark me any problem simply installs but when starting it restarts constantly without going through the restart, like the rom AOEX rom Validus, however I can install the rom Xperience, DotOs, RRemix and the Stock without any problem, you know why that happens, my device is a Moto Z Play XT1635-02.
You should use treble twrp to install rom
JR Bautista said:
You should use treble twrp to install rom
Click to expand...
Click to collapse
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily
MirandaEduardo said:
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily
Click to expand...
Click to collapse
update your bootloader to oreo?
JR Bautista said:
update your bootloader to oreo?
Click to expand...
Click to collapse
Yes, 0xC182
MirandaEduardo said:
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily
Click to expand...
Click to collapse
do a backup of your files (if you are installing xpe you need a Treble supported TWRP) in xpe 13 maybe you need to do a format data (idk why but some users have a weird bug and only can be fixed if you do a format data
so do a format data from TWRP wipe-->format data-> write yes do a swipe reboot to recovery
copy all your files the rom , install it and enjoy!
if you are installing AOSP you should use twrp from alberto
TeamMex said:
do a backup of your files (if you are installing xpe you need a Treble supported TWRP) in xpe 13 maybe you need to do a format data (idk why but some users have a weird bug and only can be fixed if you do a format data
so do a format data from TWRP wipe-->format data-> write yes do a swipe reboot to recovery
copy all your files the rom , install it and enjoy!
if you are installing AOSP you should use twrp from alberto
Click to expand...
Click to collapse
Ok, thanks, friend, I'm going to try it like that
MirandaEduardo said:
Greetings developers, someone of you can help me with the following problem, I can not install the rom AOSP the TWRP does not mark me any problem simply installs but when starting it restarts constantly without going through the restart, like the rom AOEX rom Validus, however I can install the rom Xperience, DotOs, RRemix and the Stock without any problem, you know why that happens, my device is a Moto Z Play XT1635-02.
Click to expand...
Click to collapse
Hello brother i think you have a stock rom for xt 1635 02 addison single sim. Bro can you upload it for me or some kind of link? Appreciate your kind help
khanpatriot said:
Hello brother i think you have a stock rom for xt 1635 02 addison single sim. Bro can you upload it for me or some kind of link? Appreciate your kind help
Click to expand...
Click to collapse
Yes, this Is a link
https://drive.google.com/file/d/1W-DXW1qm0g6GaALjKuA1pvM-_RHqlZ4j/view
Thanks alot
Oooppss one more query does software channel matter? I'm currently running lineage os 14.1 and i can't find the exact software channel of my device I'm little confused is it retus retail or some other channel. Can u plz help?
Hello everyone,
I'm getting really frustrated hree as I can't flash any android 10 GSI. I either get bootloop, stuck on samsung logo or stuck on restarting on samsung logo.
Flashing different kernels seem to change the above behavior (instead of bootloop I get samsung logo and vice-versa).
I tried everything:
Doing the no-verity thingie...
Flashing stock files then GSI - nothing.
Flashing soldiers oreo kernel - nothing
Flashing endurance kernel - nothing
I can't find a vendor image that's compatible with any GSI on my phone. I also can't find any kernel that's compatible either.
So please, end my misery... if anyone managed to install android 10 GSI on this TREBLE COMPATIBLE DEVICE, please guide me through or provide any useful file (vendor img/kernel) that I might have been missed.
I wrote this because I couldn't find anything that could help... Thanks in advance!
EDIT:
I solved the problem with the kind help from phhusson and the guidance from Lanreallenjay (thanks, both of you!), so I'm trying to provide the solution for anyone that might be having the same problem as I had. So here it is:
For PIE GSI: use stock kernel/vendor (anything stock), flash the GSI, then flash Magisk -> it should boot fine now (only tested with phhusson's GSI. I had vibrating restart loops before, I wasn't installing magisk, that was my mistake)
For Android 10 GSI: same as above, but install the modded Magisk from phhusson's git (located @ v200 android 10 gsi post) instead of the normal one .
itShouldWork said:
Hello everyone,
I'm getting really frustrated hree as I can't flash any android 10 GSI. I either get bootloop, stuck on samsung logo or stuck on restarting on samsung logo.
Flashing different kernels seem to change the above behavior (instead of bootloop I get samsung logo and vice-versa).
I tried everything:
Doing the no-verity thingie...
Flashing stock files then GSI - nothing.
Flashing soldiers oreo kernel - nothing
Flashing endurance kernel - nothing
I can't find a vendor image that's compatible with any GSI on my phone. I also can't find any kernel that's compatible either.
So please, end my misery... if anyone managed to install android 10 GSI on this TREBLE COMPATIBLE DEVICE, please guide me through or provide any useful file (vendor img/kernel) that I might have been missed.
I wrote this because I couldn't find anything that could help... Thanks in advance!
Click to expand...
Click to collapse
What's your phone's specifications?
Lanreallenjay said:
What's your phone's specifications?
Click to expand...
Click to collapse
Hey, thanks for the interest!
I've got the S9 Exynos variant (SM-G960F, Europe), I unlocked the bootloader several days ago.
It's on android 9 right now, I flashed the stock firmware after I've tried everything to get android 10 treble to work and failed.
Current kernel version: 4.9.59-16947752 (stock)
Build number: PPR1.180610.011.G960FXXS7CSJ3
I can flash any rom available besides GSI (I've used lineage OS 16 for a couple of days).
If you need anything else more specific just ask, I don't really know what exactly can help with this situation.
Cheers!
itShouldWork said:
Hey, thanks for the interest!
I've got the S9 Exynos variant (SM-G960F, Europe), I unlocked the bootloader several days ago.
It's on android 9 right now, I flashed the stock firmware after I've tried everything to get android 10 treble to work and failed.
Current kernel version: 4.9.59-16947752 (stock)
Build number: PPR1.180610.011.G960FXXS7CSJ3
I can flash any rom available besides GSI (I've used lineage OS 16 for a couple of days).
If you need anything else more specific just ask, I don't really know what exactly can help with this situation.
Cheers!
Click to expand...
Click to collapse
Ask for help here
https://t.me/phhtreble/283195 <---
Read before any question ^^^
After flashing G960FXXS7CSJ3 November stock firmware I can no longer flash anything.
(can't mount data partition)
When I try downgrading to G960FXXU5CSF2 June firmware Odin fails and the screen says:
SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 7 BINARY: 5
November G960FXXS7CSJ3 seems to have upgraded the bootloader security, does anyone know a fix?
itShouldWork said:
Hello everyone,
I'm getting really frustrated hree as I can't flash any android 10 GSI. I either get bootloop, stuck on samsung logo or stuck on restarting on samsung logo.
Flashing different kernels seem to change the above behavior (instead of bootloop I get samsung logo and vice-versa).
I tried everything:
Doing the no-verity thingie...
Flashing stock files then GSI - nothing.
Flashing soldiers oreo kernel - nothing
Flashing endurance kernel - nothing
I can't find a vendor image that's compatible with any GSI on my phone. I also can't find any kernel that's compatible either.
So please, end my misery... if anyone managed to install android 10 GSI on this TREBLE COMPATIBLE DEVICE, please guide me through or provide any useful file (vendor img/kernel) that I might have been missed.
I wrote this because I couldn't find anything that could help... Thanks in advance!
EDIT:
I solved the problem with the kind help from phhusson and the guidance from Lanreallenjay (thanks, both of you!), so I'm trying to provide the solution for anyone that might be having the same problem as I had. So here it is:
For PIE GSI: use stock kernel/vendor (anything stock), flash the GSI, then flash Magisk -> it should boot fine now (only tested with phhusson's GSI. I had vibrating restart loops before, I wasn't installing magisk, that was my mistake)
For Android 10 GSI: same as above, but install the modded Magisk from phhusson's git (located @ v200 android 10 gsi post) instead of the normal one .
Click to expand...
Click to collapse
So from stock you flashed AOSP 10 GSI to system partition then phh's magisk (in TWRP) then it works for you?
rupert3k said:
So from stock you flashed AOSP 10 GSI to system partition then phh's magisk (in TWRP) then it works for you?
Click to expand...
Click to collapse
Yep, it does. Buuut the rom is not stable at all, I've got random reboots/ crashes when opening settings and such, not usable at all. I'm on ONE UI 2.0 beta now which is much more stable (daily driver stable actually).
rupert3k said:
After flashing G960FXXS7CSJ3 November stock firmware I can no longer flash anything.
(can't mount data partition)
When I try downgrading to G960FXXU5CSF2 June firmware Odin fails and the screen says:
SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 7 BINARY: 5
November G960FXXS7CSJ3 seems to have upgraded the bootloader security, does anyone know a fix?
Click to expand...
Click to collapse
Have you tried formatting data with TWRP (to the part when it asks you to write "yes") then flash no-verity?
You should at least be able to flash TWRP. If you can't, just download the proper USB drivers for your device, it might be the culprit.
Cheers!
itShouldWork said:
Yep, it does. Buuut the rom is not stable at all, I've got random reboots/ crashes when opening settings and such, not usable at all. I'm on ONE UI 2.0 beta now which is much more stable (daily driver stable actually).
Click to expand...
Click to collapse
Phh just hinted it's likely Pie vendor causing panics:
"First you need to flash stock rom. Then install magisk and then this gsi.
Though please note that on Pie vendor, S9 kernel panics and reboot every few minutes, so it is highly unusable."
itShouldWork said:
Hey, thanks for the interest!
I've got the S9 Exynos variant (SM-G960F, Europe), I unlocked the bootloader several days ago.
It's on android 9 right now, I flashed the stock firmware after I've tried everything to get android 10 treble to work and failed.
Current kernel version: 4.9.59-16947752 (stock)
Build number: PPR1.180610.011.G960FXXS7CSJ3
I can flash any rom available besides GSI (I've used lineage OS 16 for a couple of days).
If you need anything else more specific just ask, I don't really know what exactly can help with this situation.
Cheers!
Click to expand...
Click to collapse
I have tried Android 10 GSI , using latest Q update
ZoiraP said:
I have tried Android 10 GSI , using latest Q update
Click to expand...
Click to collapse
Is it usable? any random reboots/ annoying instability?
itShouldWork said:
Is it usable? any random reboots/ annoying instability?
Click to expand...
Click to collapse
I have tried it partly , nfc isnt working , camera quality is bad , Bluetooth working , audio working , magisk working . I'll use it a bit more and tell you.
ZoiraP said:
I have tried it partly , nfc isnt working , camera quality is bad , Bluetooth working , audio working , magisk working . I'll use it a bit more and tell you.
Click to expand...
Click to collapse
Camera quality might be fixed with Google cam, if you find a good port.
Not to derail the thread but I just noticed after installing Android 10 beta 2 Treble Info now reports my S9 supports Treble A/B, curious no?
rupert3k said:
Not to derail the thread but I just noticed after installing Android 10 beta 2 Treble Info now reports my S9 supports Treble A/B, curious no?
Click to expand...
Click to collapse
Wait what? That's interesting...
Can someone with more experience enlighten us about the differences between the A only and A/B?
A\B
itShouldWork said:
Wait what? That's interesting...
Can someone with more experience enlighten us about the differences between the A only and A/B?
Click to expand...
Click to collapse
No real experience but A\B devices have two slots ie double the partitions (OnePlus has 67) .
This allows updates to be installed while running from slot A while the updated system is copied to B.
Apparently Q requires A\B so now we're on Q may as well try that next time we're curious
Phh just released:
AOSP 10.0 v208
Fix suspend/dt2w for Samsung Q vendor
Fix backlight for Samsung Q vendor
Samsung Q's fine, love gestures but the bloat is killing me.
You can tell Q's going to be so much leaner without bixby & friends.
Glad we installed it to get compatible but I think now we probably stand a better chance with 10 GSI's, hopefully LOS17 & Pixel Experience get updated again soon.
Wondering whether to following the rooting instructions yet?
Phh did say "flash stock rom then magisk and then gsi"
https://forum.xda-developers.com/galaxy-s9/how-to/one-ui-2-beta-rooting-installing-twrp-t4012961
ZoiraP's wondering why we sooo slow lol!
Wow this looks good: https://forum.xda-developers.com/ga...-s9--s9-cross-device-development/rom-t4020939
These days, I find many people asked how to enable fingerprint on Mi 8 PRO(runs GSI), so I'd write this thread to let you konw. I only test the phh's AOSP v217 with MIUI 12 20.5.21 vendor. If you want to use other GSI or other vendor you can also test whether fingerprint works on it by following these steps. However, these instructions may only works on Android 10.
I assume you are familiar enough how to flash GSI on Mi 8 pro. If you just a rookie, I recommand you to read this passage.(Of course, don't forget follow the instructions what I writed).
Follow these steps:
Step 1: Flash the MIUI 12 rom(20.5.21) by this TWRP.
Step 2: Find the GSI. ATTENTION: The GSI needs to be ARM64-AB!!! . I will recommand the phh's AOSP GSI v217(Because I only test it). Of course, you can chose other GSIs you like and test whether the fingerprint works on it.
Step 3: Flash it by the TWRP.
That's all. Hope you enjoy it!
Did the partition layout change with MIUI 12?
The Mi 8 Pro (equuleus) used to be a A only GSI image. I would like to try this... even if I replaced my Mi 8 Pro recently with a OnePlus 7 pro... mainly due to the fingerprint!!!
nealed said:
Did the partition layout change with MIUI 12?
The Mi 8 Pro (equuleus) used to be a A only GSI image. I would like to try this... even if I replaced my Mi 8 Pro recently with a OnePlus 7 pro... mainly due to the fingerprint!!!
Click to expand...
Click to collapse
I saw it on phh's AOSP wiki on github. That's what he said:
Why should I use GSI for A/B devices to some A-only devices? : On Android 9, Google changed the requirements and all devices shipped with Android 9 must use "system-as-root". Before this change, only A/B devices were system-as-root and GSI name was separated by A-only and A/B. For this historical reasons, you have to use GSI for A/B on the devices shipped with Android 9+.
If I try to flash the arm64-a Android 10 GSI then it can't boot and just go to the fastboot mode. However, if I flash Android 10 arm64-ab rom, it will succeed to boot. So I think we should use arm64-ab rom instead of arm64-a rom(at least on Android 10 we should do it).
Arm64-ab-floss OR Arm64-ab-go OR Arm64-ab-vanilla?
Sent from my MI 8 Pro using Tapatalk
---------- Post added at 12:59 PM ---------- Previous post was at 12:58 PM ----------
Kimsimth said:
I saw it on phh's AOSP wiki on github. That's what he said:
Why should I use GSI for A/B devices to some A-only devices? : On Android 9, Google changed the requirements and all devices shipped with Android 9 must use "system-as-root". Before this change, only A/B devices were system-as-root and GSI name was separated by A-only and A/B. For this historical reasons, you have to use GSI for A/B on the devices shipped with Android 9+.
If I try to flash the arm64-a Android 10 GSI then it can't boot and just go to the fastboot mode. However, if I flash Android 10 arm64-ab rom, it will succeed to boot. So I think we should use arm64-ab rom instead of arm64-a rom(at least on Android 10 we should do it).
Click to expand...
Click to collapse
Arm64-ab-floss OR Arm64-ab-go OR Arm64-ab-vanilla?
Sent from my MI 8 Pro using Tapatalk
Jord5s said:
Arm64-ab-floss OR Arm64-ab-go OR Arm64-ab-vanilla?
Sent from my MI 8 Pro using Tapatalk
---------- Post added at 12:59 PM ---------- Previous post was at 12:58 PM ----------
Arm64-ab-floss OR Arm64-ab-go OR Arm64-ab-vanilla?
Sent from my MI 8 Pro using Tapatalk
Click to expand...
Click to collapse
It up to you. You should chose the one you prefer. If you dont know what differences of them, just search it on Google. And all of them can succeed to boot.
Kimsimth said:
It up to you. You should chose the one you prefer. If you dont know what differences of them, just search it on Google. And all of them can succeed to boot.
Click to expand...
Click to collapse
Why must you flash MIUI12 first? I am running MIUI 11.0.5 Android 10...
Sent from my MI 8 Pro using Tapatalk
Jord5s said:
Why must you flash MIUI12 first? I am running MIUI 11.0.5 Android 10...
Sent from my MI 8 Pro using Tapatalk
Click to expand...
Click to collapse
Just because the fingerprint only works on MIUI 12 vendor. Just backup your data and flash the MIUI 12 rom.
Thanks for the guide !
you forget to mention we must had advance wipe the system partition -will mostly go into fastboot if not-
plus, anyone was able to pass safetynet ? my banks apps not working at all even after using magiskhide props
even whatsapp tells me this is an unofficial ROM
Aldwarii said:
Thanks for the guide !
you forget to mention we must had advance wipe the system partition -will mostly go into fastboot if not-
Click to expand...
Click to collapse
That I mentioned this thread
Aldwarii said:
plus, anyone was able to pass safetynet ? my banks apps not working at all even after using magiskhide props
even whatsapp tells me this is an unofficial ROM
Click to expand...
Click to collapse
U can do this by uninstall root. By click phh settings->Securize then you will rid out of root. However, you can use "MagiskHide Props Config" module to pass the safetynet.
1.) Install the "MagiskHide Props Config" module
2.) Reboot
3.) Run a terminal app and type:
su
props
4.) Set the fingerprint with the following keys (pressing enter after each):
1 -> f ->Any way u want(but I recommend you to chose the Xiaomi option), just follow the instruction of it.
5.)reboot.
And dont forget to uninstall the edxposed module first if you install it before.
Kimsimth;82980891
U can do this by uninstall root. By click phh settings->Securize then you will rid out of root. However said:
su
props[/B]
4.) Set the fingerprint with the following keys (pressing enter after each):
1 -> f ->Any way u want(but I recommend you to chose the Xiaomi option), just follow the instruction of it.
5.)reboot.
And dont forget to uninstall the edxposed module first if you install it before.
Click to expand...
Click to collapse
I need my root, so I can't uninstall it
I applied a factory reset, with internal storage wipe to ensure everything been deleted, then installed Magiskhide props and set the proper fingerprint "xiaomi mi 8 android 10"
hided google play services and store and framework in the MagiskHide
and now, wow ! it worked
but there is still 2 applications that haven't worked
1) STCpay
2) Alinma internet
may you please try these 2 bank applications to indicate if the issue only with me or not please ?
Aldwarii said:
I need my root, so I can't uninstall it
I applied a factory reset, with internal storage wipe to ensure everything been deleted, then installed Magiskhide props and set the proper fingerprint "xiaomi mi 8 android 10"
hided google play services and store and framework in the MagiskHide
and now, wow ! it worked
but there is still 2 applications that haven't worked
1) STCpay
2) Alinma internet
may you please try these 2 bank applications to indicate if the issue only with me or not please ?
Click to expand...
Click to collapse
The Alinma internet can be opened like this. However, the stc pay still cant be opened. You can read this passage "Time attack-based bypass script (Deprecated)" and follow it to make the app work I think. Good luck.
Btw I use the Lineage 17.1 rom now.
Kimsimth said:
The Alinma internet can be opened like this. However, the stc pay still cant be opened. You can read this passage "Time attack-based bypass script (Deprecated)" and follow it to make the app work I think. Good luck.
Btw I use the Lineage 17.1 rom now.
Click to expand...
Click to collapse
Tried that, but didn't get any benefit, even the worked apps had crashed after reboot :/
this GSI stuff is just a headache, no safetynet pass, android auto not working, device get very hot, battery drained faster -better than MIUI12 though- with no additional features upon MIUI at all
I think I will give the lineageOS a try tonight
Thank you my friend for you support all the way "big heart"