Related
It was fun while it lasted, but I think we can safely skip KA1. I'll leave everything here for those that want to play, but I'm going back to Roto-JME and crank out a new release of that.
Here are the pre-packaged KA1 firmwares, pre-rooted.
I am recommending that you flash CF-Root-Tab-KA1 to get ClockWorkMod 3.0 if you do not have a protected bootloader.
Use Roto-KA1-Full.zip if you are coming from any firmware other than Roto-JME.
Use Roto-KA1-Upgrade.zip if your current firmware is Roto-JME.
Use P1_add_hidden.pit if you're not coming from Roto-JME.
I have made the following filesystem changes so far:
Deleted Gmail.apk, Maps.apk and install_flash_player.apk to free up space for rooting.
Added AppWidgetPicker-1.2.1.apk
For those of you with protected bootloaders, either package will work for you too.
rotohammer said:
Thank chainfire for the release of the firmware!
Here are the pre-packaged KA1 firmwares, not rooted, as I am recommending that you flash CF-Root-Tab-KA1 to get root and ClockWorkMod 3.0.
Use Roto-KA1-Full.zip if you are coming from any firmware other than Roto-JME.
Use Roto-KA1-Upgrade.zip if your current firmware is Roto-JME.
Use P1_add_hidden.pit if you're not coming from Roto-JME.
I have not modified the filesystem on this initial release.
Click to expand...
Click to collapse
What is included on this firmware?
adinis78 said:
What is included on this firmware?
Click to expand...
Click to collapse
KA1
I'm still making packages, have no time to actually use it. Its smooth, especially the curtain.
JL1 modem. So far gallery hasn't went 100% cpu. Theres a new "Active Applications" widget showing how many apps are in the background, with some type of meter or display or something.
rotohammer said:
KA1
I'm still making packages, have no time to actually use it. Its smooth, especially the curtain.
Click to expand...
Click to collapse
sorry still confused, is this an actual rom or just an add on package to the JME rom.
Can you port to cdma devices
Sent from my ADR6300 using XDA App
adinis78 said:
sorry still confused, is this an actual rom or just an add on package to the JME rom.
Click to expand...
Click to collapse
I posted both a full package and an upgrade for those on Roto-JME.
Where can I get the leaked FW ?
papi92 said:
Can you port to cdma devices
Click to expand...
Click to collapse
Not at the moment, I don't have a CDMA device.
Hi, Roto
I have flashed the original JM* series ROM so the bootloader already got protected. Is there any safe way to downgrade?
I went through the whole thread of downgrading JM6, but eventually was confused and didn't dare to try.
Any of your advise will be highly appreciated.
EDIT: I will give a try no matter how according to the guidance.
adinis78 said:
What is included on this firmware?
Click to expand...
Click to collapse
essentially what you get with this is a Clockwork Recovery, so we can flash future roms instead of using Odin.....am i right on stating this?
adinis78 said:
essentially what you get with this is a Clockwork Recovery, so we can flash future roms instead of using Odin.....am i right on stating this?
Click to expand...
Click to collapse
No, you get that by installing CF-Root.
rotohammer said:
No, you get that by installing CF-Root.
Click to expand...
Click to collapse
oh, so then KA1 is the follow up to JME?
Thank`s Roto
but update fails from JME v2
The Setting`s for a full flash ?
Pit yes - no
Repart yes - no ??
Sry for my English........
Arguments for upgrading?
Excuse me, but isn't KA1 an Asian ROM?
What are the arguments for upgrading from Roto-JME, if you're an European SGT user?
Thx!
Just flashed Roto-KA1-Upgrade and CF-Root-Tab-KA1 over JME(non-protected bootloader), everything seems excellent so far, very smooth moving through apps and menus, no problems with screen auto-dim, even the Readers Hub is updating properly(hasn't updated properly for me through the JMx roms).
Edit:
Market just updated properly.
Swype v2.4.44.10881 is full-screen for those who were wondering.
Thanks rotohammer and chainfire for all your work on these releases.
Cheers,
Rob
Hoffighter said:
Thank`s Roto
but update fails from JME v2
The Setting`s for a full flash ?
Pit yes - no
Repart yes - no ??.
Click to expand...
Click to collapse
That is correct, just select Roto-KA1-Upgrade.tar and thats it.
How did it fail?
zyborg said:
Excuse me, but isn't KA1 an Asian ROM?
What are the arguments for upgrading from Roto-JME, if you're an European SGT user?
Click to expand...
Click to collapse
Asian and English. The Asians lost out on JME, so now its their turn. Would be nice to combine all the locales though.
Roto,
What about us fools that have signed PBL,SBL,zimage???
Do you have anything for us signed bootloader people? Or are we screwed?
Thanks for all the hard work!
rgbc said:
Just flashed Roto-KA1-Upgrade and CF-Root-Tab-KA1 over JME(non-protected bootloader), everything seems excellent so far, very smooth moving through apps and menus, no problems with screen auto-dim, even the Readers Hub is updating properly(hasn't updated properly for me through the JMx roms).
Edit:
Market just updated properly.
Swype v2.4.44.10881 is full-screen for those who were wondering.
Thanks rotohammer and chainfire for all your work on these releases.
Cheers,
Rob
Click to expand...
Click to collapse
how about the pinch zoom on the browser, is it working? mine is not working the current Roto JME rom.
rmanaudio said:
What about us fools that have signed PBL,SBL,zimage???
Do you have anything for us signed bootloader people? Or are we screwed?
Click to expand...
Click to collapse
Yes, I just pre-rooted both packages, you can run them now.
Hi,
My wife has a P6S-U06 phone (the Dual-SIM version of P6 with slightly stronger processor) and today morning the phone indicated that there is OTA firmware update. I downloaded it through WiFi and installed it, but without success. I repeated the whole process twice more, thinking that it might be an incomplete download. But the flash always 'FAILED'. (See attached picture)
The OTA upgrade should have updated the P6S-U06 B128 firmware version to B131.
What could be the problem? What can I do?
Ok, finally I resolved the problem. The B131 is out now and I flashed the full ROM. Then immediately came the 4.4 ROM as OTA upgrade and I installed it too.
Tapatalk-kal küldve az én GT-N5100-el
ctibor said:
Ok, finally I resolved the problem. The B131 is out now and I flashed the full ROM. Then immediately came the 4.4 ROM as OTA upgrade and I installed it too.
Tapatalk-kal küldve az én GT-N5100-el
Click to expand...
Click to collapse
facing same problem, can you post the link of firmware,
thanks
Hi,
The download link:
http://consumer.huawei.com/cn/support/downloads/detail/index.htm?id=23847
But take care, the site is in Chinese, you'd better use Google translate.
Tapatalk-kal küldve az én GT-N5100-el
Hi
I have the same problem. Can you share few steps in resolving it.
Thanks
campsg said:
Hi
I have the same problem. Can you share few steps in resolving it.
Thanks
Click to expand...
Click to collapse
Well, it's quite simple. From the downloaded zip you extract the 'dload' folder and put it into your internal memory. Then start Update app on the phone and choose local update.
ctibor said:
Well, it's quite simple. From the downloaded zip you extract the 'dload' folder and put it into your internal memory. Then start Update app on the phone and choose local update.
Click to expand...
Click to collapse
Thank you. I was able to update mine to B131. One more thing, you mentioned about 4.4, but there's no such update available.
campsg said:
Thank you. I was able to update mine to B131. One more thing, you mentioned about 4.4, but there's no such update available.
Click to expand...
Click to collapse
After flashing B131 the phone indicated that there is a new online (OTA - Over the air) update. I downloaded it by Wi-Fi and installed it.
Now my firmware version is B202 SP03. It is Android 4.4, Emotion UI 2.3. The OTA update did not delete my data. All apps, settings remained unchanged.
ctibor said:
After flashing B131 the phone indicated that there is a new online (OTA - Over the air) update. I downloaded it by Wi-Fi and installed it.
Now my firmware version is B202 SP03. It is Android 4.4, Emotion UI 2.3. The OTA update did not delete my data. All apps, settings remained unchanged.
Click to expand...
Click to collapse
Thank you but seems like the upgrade to 4.4 is no longer available. Thanks again for the help. Maybe I will just try to look for any possible link to download the firmware.
ctibor said:
Ok, finally I resolved the problem. The B131 is out now and I flashed the full ROM. Then immediately came the 4.4 ROM as OTA upgrade and I installed it too.
Tapatalk-kal küldve az én GT-N5100-el
Click to expand...
Click to collapse
Hey I searched everywhere for the B131 file but cannot find it. Do you still have and if so is it too much trouble to ask you to uploaded ?
I've tried updating to b208 b207 b202 but all of them fail during the update
Gatos7 said:
Hey I searched everywhere for the B131 file but cannot find it.
Click to expand...
Click to collapse
You can download it from this link:
http://download-c.huawei.com/download/downloadCenter?downloadId=23847&version=42282&siteCode=cn
ctibor said:
Hi,
My wife has a P6S-U06 phone (the Dual-SIM version of P6 with slightly stronger processor) and today morning the phone indicated that there is OTA firmware update. I downloaded it through WiFi and installed it, but without success. I repeated the whole process twice more, thinking that it might be an incomplete download. But the flash always 'FAILED'. (See attached picture)
The OTA upgrade should have updated the P6S-U06 B128 firmware version to B131.
What could be the problem? What can I do?
Click to expand...
Click to collapse
Hi Tibor!
Last week I bought a P6S too. My version is B128. As I see on Huawei chinese local site, there's a newer firmware version. ( Ascend P6S（P6 S-U06,Android 4.4，Emotion UI 2.3，V100R001C17B208SP01)) Did you update yet to this version? Which version are you using?
I'm bit afraid to brick my phone during the update, therefore I would like to make a backup before. How can I make a full backup? Root permission is needed to that action?
Anybody tried this firmware? (P6 S-U06,Android 4.4，Emotion UI 2.3，V100R001C17B208SP01) Is it OK?
Thanks in advance!
Regards,
Klown
Klown85 said:
Hi Tibor!
Last week I bought a P6S too. My version is B128. As I see on Huawei chinese local site, there's a newer firmware version. ( Ascend P6S（P6 S-U06,Android 4.4，Emotion UI 2.3，V100R001C17B208SP01)) Did you update yet to this version? Which version are you using?
I'm bit afraid to brick my phone during the update, therefore I would like to make a backup before. How can I make a full backup? Root permission is needed to that action?
Anybody tried this firmware? (P6 S-U06,Android 4.4，Emotion UI 2.3，V100R001C17B208SP01) Is it OK?
Thanks in advance!
Regards,
Klown
Click to expand...
Click to collapse
I have already answered to you at another thread.
My wife is using now the same V100R001C17B208SP01 firmware on her P6S-U06 phone. The system is very smooth, we cannot recognise any bug of that ROM. So, I strongly recommend to use it!
ctibor said:
Well, it's quite simple. From the downloaded zip you extract the 'dload' folder and put it into your internal memory. Then start Update app on the phone and choose local update.
Click to expand...
Click to collapse
I've tried to do the same thing with my phone but the system says that 'Update was not found'. I have the same B128 version. Does anybody know what can cause such an error?
Ok, so after I update to a new firmware, does it stay with me after flashing a different rom? Or do I have to update to the newest firmware every time I flash a new rom?
09eric09 said:
Ok, so after I update to a new firmware, does it stay with me after flashing a different rom? Or do I have to update to the newest firmware every time I flash a new rom?
Click to expand...
Click to collapse
You don't have to reflash firmware.
Well, that depends on the Rom.
If the Rom you'll install requires a new firmware then the answer is Yes.
Most Rom upgrades do not requiere firmware upgrade, that is why you need to read thr thread of the Rom.
Example: viper Rom. V1 to v2 requiered new firmwar, v2 to v3 required upgrade as well. 3.0.1 to 3.1.0 was a minor upgrade so no firmware upgrade was required.
jmoneste said:
Well, that depends on the Rom.
If the Rom you'll install requires a new firmware then the answer is Yes.
Most Rom upgrades do not requiere firmware upgrade, that is why you need to read thr thread of the Rom.
Example: viper Rom. V1 to v2 requiered new firmwar, v2 to v3 required upgrade as well. 3.0.1 to 3.1.0 was a minor upgrade so no firmware upgrade was required.
Click to expand...
Click to collapse
Ummm... he's asking if he has to RE-FLASH the same firmware after a ROM update, not asking if he has to update his firmware to flash a new version ROM.
So yes, the answer is no.
xunholyx said:
Ummm... he's asking if he has to RE-FLASH the same firmware after a ROM update, not asking if he has to update his firmware to flash a new version ROM.
So yes, the answer is no.
Click to expand...
Click to collapse
From what I can read: Or do I have to update to the newest firmware every time I flash a new rom?
That depends on the ROM.
jmoneste said:
From what I can read: Or do I have to update to the newest firmware every time I flash a new rom?
That depends on the ROM.
Click to expand...
Click to collapse
From what I can read: "Ok, so after I update to a new firmware, does it stay with me after flashing a different rom?" (copied and pasted)
The answer is still no.
xunholyx said:
From what I can read: "Ok, so after I update to a new firmware, does it stay with me after flashing a different rom?" (copied and pasted)
The answer is still no.
Click to expand...
Click to collapse
Yeah, you got it. I just wanted to know if the firmware would "stick" after flashing a new Rom.
09eric09 said:
Yeah, you got it. I just wanted to know if the firmware would "stick" after flashing a new Rom.
Click to expand...
Click to collapse
Yes it will.
I have Xperia xa2 ultra but nobody will answer me on there so I came here to ask when we update Lineage OS and there are multiple updates can I only download the newest one and have it work or do I need to do all of them
tactical bacon said:
I have Xperia xa2 ultra but nobody will answer me on there so I came here to ask when we update Lineage OS and there are multiple updates can I only download the newest one and have it work or do I need to do all of them
Click to expand...
Click to collapse
If it is OTA it depends, but most of the times you need to install them one-by-one, instead if it is the full Zip you need just the last one
faby GT said:
If it is OTA it depends, but most of the times you need to install them one-by-one, instead if it is the full Zip you need just the last one
Click to expand...
Click to collapse
What? That's wrong. You can skip from 01/03 build to today's without problems even with the in-built OTA updater.
mirco_pa said:
What? That's wrong. You can skip from 01/03 build to today's without problems even with the in-built OTA updater.
Click to expand...
Click to collapse
I didn't get it was related to the built-in OTA, I understood he was talking about TWRP flash.
If related to built-in you can just follow what advised
I have an unlocked S10+ (G975) and I am on the latest OneUI 2.0 Beta 7 build (ZSKL). I am trying to use the small (~135MB) upgrade package to upgrade to the official BSKO build. It can be found here, but also in other pages. I download the file, rename as update.zip, place on the root of my SD card, reboot into stock recovery mode and flash from there. The process starts and aborts with the following error:
E3004: This package is for "beyond2" devices; this is a "beyond2q".
According to this and other pages beyond2q is the name of the unlocked S10 (not S10+).
If you're asking whether I downloaded the S10 package instead of the S10+ (I did not... triple-checked) or even whether the page has the links inverted, try not to focus on that, but on the fact recovery thinks I have a different device.
Has anyone else run into this? I saw someone else's post claiming the same thing in another thread, but there was no response and thread is now closed.
Thanks in advance.
Razor1973 said:
I have an unlocked S10+ (G975) and I am on the latest OneUI 2.0 Beta 7 build (ZSKL). I am trying to use the small (~135MB) upgrade package to upgrade to the official BSKO build. It can be found here, but also in other pages. I download the file, rename as update.zip, place on the root of my SD card, reboot into stock recovery mode and flash from there. The process starts and aborts with the following error:
E3004: This package is for "beyond2" devices; this is a "beyond2q".
According to this and other pages beyond2q is the name of the unlocked S10 (not S10+).
If you're asking whether I downloaded the S10 package instead of the S10+ (I did not... triple-checked) or even whether the page has the links inverted, try not to focus on that, but on the fact recovery thinks I have a different device.
Has anyone else run into this? I saw someone else's post claiming the same thing in another thread, but there was no response and thread is now closed.
Thanks in advance.
Click to expand...
Click to collapse
Just flash BSKO via odin
Btw beyond2q is snapdragon, chinese version (SM-G9750)
ExtremeGrief said:
Just flash BSKO via odin
Btw beyond2q is snapdragon, chinese version (SM-G9750)
Click to expand...
Click to collapse
I don't think the Odin files are out yet, at least not that I've seen.
todd3835 said:
I don't think the Odin files are out yet, at least not that I've seen.
Click to expand...
Click to collapse
They are out, but that's the full 5GB update. I just wanted to flash the delta from Beta 7 (135MB). I still don't know how.
ExtremeGrief said:
Btw beyond2q is snapdragon, chinese version (SM-G9750)
Click to expand...
Click to collapse
I bought it in the U.S. from the Samsung U.S. site unlocked.
I just went into my Settings > About screen and this is what I see:
Model Number: SM-G975U1
Baseband version: G975U1UEU2ZSKKL
It's clearly the model for which I am downloading the upgrade package and it's definitely not a beyond2q as the recovery flash is saying.
Razor1973 said:
They are out, but that's the full 5GB update. I just wanted to flash the delta from Beta 7 (135MB). I still don't know how.
Click to expand...
Click to collapse
The update is on firmware.science,and is 200ish mb
todd3835 said:
The update is on firmware.science,and is 200ish mb
Click to expand...
Click to collapse
Unfortunately, that site (which I didn't know about, so thank you) doesn't have the OTA build for my model. See screenshot of the only one that is, attached.
Razor1973 said:
Unfortunately, that site (which I didn't know about, so thank you) doesn't have the OTA build for my model. See screenshot of the only one that is, attached.
Click to expand...
Click to collapse
Then you downloaded it from G975F site that is european
Here, try this https://www.goofwear.com/android/do...d10/beta/81ecade5245f4a70864919d14c44a1ea.zip
ExtremeGrief said:
Then you downloaded it from G975F site that is european
Click to expand...
Click to collapse
I did not. Did you see the screenshot attached to my previous post? I chose G975U1, i.e. my S10+ model.
ExtremeGrief said:
Here, try this https://www.goofwear.com/android/do...d10/beta/81ecade5245f4a70864919d14c44a1ea.zip
Click to expand...
Click to collapse
Tried and it failed too. I can't save the log, so it's all typing. Here's a relevant part:
Source: samsung/beyond2qltesq/beyond2g: 10/QP1A.190711.020/G975USQU2ZSKL:user/release-keys
Target: samsung/beyond2qltesq/beyond2g: 10/QP1A.190711.020/G975USQU2CSKP:user/release-keys
I am not sure where you pulled that update package from, but it seems to be for the wrong build (CSKP instead of BSKO).
Still not able to upgrade via recovery and still no OTA from Samsung for my OneUI 2.0 Beta 7 S10+.
Razor1973 said:
I did not. Did you see the screenshot attached to my previous post? I chose G975U1, i.e. my S10+ model.
Tried and it failed too. I can't save the log, so it's all typing. Here's a relevant part:
Source: samsung/beyond2qltesq/beyond2g: 10/QP1A.190711.020/G975USQU2ZSKL:user/release-keys
Target: samsung/beyond2qltesq/beyond2g: 10/QP1A.190711.020/G975USQU2CSKP:user/release-keys
I am not sure where you pulled that update package from, but it seems to be for the wrong build (CSKP instead of BSKO).
Still not able to upgrade via recovery and still no OTA from Samsung for my OneUI 2.0 Beta 7 S10+.
Click to expand...
Click to collapse
The final build for U1 wasn't pushed yet, only for U last I heard. It's usually a week or so after all carriers have pushed the final release.
todd3835 said:
The final build for U1 wasn't pushed yet, only for U last I heard. It's usually a week or so after all carriers have pushed the final release.
Click to expand...
Click to collapse
That would definitely make more sense. I will continue checking. Thanks.
Razor1973 said:
I did not. Did you see the screenshot attached to my previous post? I chose G975U1, i.e. my S10+ model.
Tried and it failed too. I can't save the log, so it's all typing. Here's a relevant part:
Source: samsung/beyond2qltesq/beyond2g: 10/QP1A.190711.020/G975USQU2ZSKL:user/release-keys
Target: samsung/beyond2qltesq/beyond2g: 10/QP1A.190711.020/G975USQU2CSKP:user/release-keys
I am not sure where you pulled that update package from, but it seems to be for the wrong build (CSKP instead of BSKO).
Still not able to upgrade via recovery and still no OTA from Samsung for my OneUI 2.0 Beta 7 S10+.
Click to expand...
Click to collapse
There isnt bsko for U1. There is Cskp
That's the real answer. Samsung hasn't released it.